arm: Xilinx Zynq dt patches for v3.18

- Add eth phys
 - Add led for zc702
 - Various dts cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iEYEABECAAYFAlQYFewACgkQykllyylKDCGHKgCeJK4b6TUOD3UNQgI8qu8UkUPV
 UQwAnRH5BSaqtTkiasx6feLE7dKpNHeW
 =Trb8
 -----END PGP SIGNATURE-----

Merge tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx into next/dt

Pull "arm: Xilinx Zynq dt patches for v3.18" from Michal Simek:

- Add eth phys
- Add led for zc702
- Various dts cleanups

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: Add ISL9305 regulator on Parallella board
  ARM: zynq: DT: Add Ethernet phys
  ARM: zynq: DT: Fix coding style issues in dtsi
  ARM: zynq: DT: Describe interrupt-names for pl330
  ARM: zynq: DT: Extend compatible string for zedboard
  ARM: zynq: DT: Use 0x prefix for memory nodes
  ARM: zynq: DT: Update years in header
  ARM: zynq: DT: Move size/address properties to dtsi
  ARM: zynq: DT: Fix Ethernet phy modes
  ARM: zynq: DT: Add LEDs to zc702 DT

arch/arm/boot/dts/zynq-7000.dtsi

@@ -195,6 +195,8 @@
 			interrupts = <0 22 4>;
 			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
 			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gem1: ethernet@e000c000 {
@@ -204,6 +206,8 @@
 			interrupts = <0 45 4>;
 			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
 			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		sdhci0: sdhci@e0100000 {
@@ -214,7 +218,7 @@
 			interrupt-parent = <&intc>;
 			interrupts = <0 24 4>;
 			reg = <0xe0100000 0x1000>;
-		} ;
+		};
 
 		sdhci1: sdhci@e0101000 {
 			compatible = "arasan,sdhci-8.9a";
@@ -224,7 +228,7 @@
 			interrupt-parent = <&intc>;
 			interrupts = <0 47 4>;
 			reg = <0xe0101000 0x1000>;
-		} ;
+		};
 
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
@@ -256,6 +260,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xf8003000 0x1000>;
 			interrupt-parent = <&intc>;
+			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+				"dma4", "dma5", "dma6", "dma7";
 			interrupts = <0 13 4>,
 			             <0 14 4>, <0 15 4>,
 			             <0 16 4>, <0 17 4>,
@@ -271,7 +277,7 @@
 		devcfg: devcfg@f8007000 {
 			compatible = "xlnx,zynq-devcfg-1.0";
 			reg = <0xf8007000 0x100>;
-		} ;
+		};
 
 		global_timer: timer@f8f00200 {
 			compatible = "arm,cortex-a9-global-timer";
@@ -303,6 +309,6 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xf8f00600 0x20>;
 			clocks = <&clkc 4>;
-		} ;
+		};
 	};
 };

arch/arm/boot/dts/zynq-parallella.dts

@@ -25,7 +25,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x40000000>;
+		reg = <0x0 0x40000000>;
 	};
 
 	chosen {
@@ -38,8 +38,6 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
 	ethernet_phy: ethernet-phy@0 {
 		/* Marvell 88E1318 */
@@ -53,6 +51,29 @@
 
 &i2c0 {
 	status = "okay";
+
+	isl9305: isl9305@68 {
+		compatible = "isl,isl9305";
+		reg = <0x68>;
+
+		regulators {
+			dcd1 {
+				regulator-name = "VDD_DSP";
+				regulator-always-on;
+			};
+			dcd2 {
+				regulator-name = "1P35V";
+				regulator-always-on;
+			};
+			ldo1 {
+				regulator-name = "VDD_ADJ";
+			};
+			ldo2 {
+				regulator-name = "VDD_GPIO";
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &sdhci1 {

arch/arm/boot/dts/zynq-zc702.dts

@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2011 - 2014 Xilinx
  *  Copyright (C) 2012 National Instruments Corp.
  *
  * This software is licensed under the terms of the GNU General Public
@@ -27,6 +27,15 @@
 		bootargs = "console=ttyPS0,115200 earlyprintk";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		ds23 {
+			label = "ds23";
+			gpios = <&gpio0 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 };
 
 &can0 {
@@ -35,7 +44,12 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
 };
 
 &i2c0 {

arch/arm/boot/dts/zynq-zc706.dts

@@ -1,7 +1,6 @@
 /*
- *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2011 - 2014 Xilinx
  *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -21,7 +20,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x40000000>;
+		reg = <0x0 0x40000000>;
 	};
 
 	chosen {
@@ -32,7 +31,12 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
 };
 
 &i2c0 {

arch/arm/boot/dts/zynq-zed.dts

@@ -1,7 +1,6 @@
 /*
- *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2011 - 2014 Xilinx
  *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -17,11 +16,11 @@
 
 / {
 	model = "Zynq Zed Development Board";
-	compatible = "xlnx,zynq-7000";
+	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x20000000>;
+		reg = <0x0 0x20000000>;
 	};
 
 	chosen {
@@ -32,7 +31,12 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &sdhci0 {