diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3d1ade2e5196..cc471983ac0e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -119,6 +119,18 @@ config TOUCHSCREEN_DYNAPRO To compile this driver as a module, choose M here: the module will be called dynapro. +config TOUCHSCREEN_HAMPSHIRE + tristate "Hampshire serial touchscreen" + select SERIO + help + Say Y here if you have a Hampshire serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called hampshire. + config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 41145d074dec..8ad36eef90a2 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o +obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c new file mode 100644 index 000000000000..2da6cc31bb21 --- /dev/null +++ b/drivers/input/touchscreen/hampshire.c @@ -0,0 +1,205 @@ +/* + * Hampshire serial touchscreen driver + * + * Copyright (c) 2010 Adam Bennett + * Based on the dynapro driver (c) Tias Guns + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2010/04/08 Adam Bennett + * Copied dynapro.c and edited for Hampshire 4-byte protocol + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_DESC "Hampshire serial touchscreen driver" + +MODULE_AUTHOR("Adam Bennett "); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40 +#define HAMPSHIRE_FORMAT_LENGTH 4 +#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80 + +#define HAMPSHIRE_MIN_XC 0 +#define HAMPSHIRE_MAX_XC 0x1000 +#define HAMPSHIRE_MIN_YC 0 +#define HAMPSHIRE_MAX_YC 0x1000 + +#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6)) +#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9)) +#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct hampshire { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[HAMPSHIRE_FORMAT_LENGTH]; + char phys[32]; +}; + +static void hampshire_process_data(struct hampshire *phampshire) +{ + struct input_dev *dev = phampshire->dev; + + if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) { + input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data)); + input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data)); + input_report_key(dev, BTN_TOUCH, + HAMPSHIRE_GET_TOUCHED(phampshire->data)); + input_sync(dev); + + phampshire->idx = 0; + } +} + +static irqreturn_t hampshire_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct hampshire *phampshire = serio_get_drvdata(serio); + + phampshire->data[phampshire->idx] = data; + + if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0]) + hampshire_process_data(phampshire); + else + dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", + phampshire->data[0]); + + return IRQ_HANDLED; +} + +static void hampshire_disconnect(struct serio *serio) +{ + struct hampshire *phampshire = serio_get_drvdata(serio); + + input_get_device(phampshire->dev); + input_unregister_device(phampshire->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(phampshire->dev); + kfree(phampshire); +} + +/* + * hampshire_connect() is the routine that is called when someone adds a + * new serio device that supports hampshire protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ + +static int hampshire_connect(struct serio *serio, struct serio_driver *drv) +{ + struct hampshire *phampshire; + struct input_dev *input_dev; + int err; + + phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!phampshire || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + phampshire->serio = serio; + phampshire->dev = input_dev; + snprintf(phampshire->phys, sizeof(phampshire->phys), + "%s/input0", serio->phys); + + input_dev->name = "Hampshire Serial TouchScreen"; + input_dev->phys = phampshire->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_HAMPSHIRE; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(phampshire->dev, ABS_X, + HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0); + input_set_abs_params(phampshire->dev, ABS_Y, + HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0); + + serio_set_drvdata(serio, phampshire); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(phampshire->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(phampshire); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id hampshire_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_HAMPSHIRE, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, hampshire_serio_ids); + +static struct serio_driver hampshire_drv = { + .driver = { + .name = "hampshire", + }, + .description = DRIVER_DESC, + .id_table = hampshire_serio_ids, + .interrupt = hampshire_interrupt, + .connect = hampshire_connect, + .disconnect = hampshire_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init hampshire_init(void) +{ + return serio_register_driver(&hampshire_drv); +} + +static void __exit hampshire_exit(void) +{ + serio_unregister_driver(&hampshire_drv); +} + +module_init(hampshire_init); +module_exit(hampshire_exit); diff --git a/include/linux/serio.h b/include/linux/serio.h index 64b473066b9a..b5552568178d 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -196,5 +196,6 @@ static inline void serio_continue_rx(struct serio *serio) #define SERIO_TOUCHIT213 0x38 #define SERIO_W8001 0x39 #define SERIO_DYNAPRO 0x3a +#define SERIO_HAMPSHIRE 0x3b #endif