redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

[ALSA] Several fixes for the Sun DBRI driver 

SPARC DBRI driver
This patch contains the following fixes to the Alsa DBRI driver:

- Remove 2.6.13 build warning on the prom_getproperty() call.

- Rework command synchronization: send a sequence number with D_WAIT,
  and check it in the completion interrupt.
  Move synchronization delays from _cmdsend() to _cmdlock() allowing the
  CPU to do other usefull things while the DBRI is processing the
  commands.

- Fix first argument of printk() calls.

- Enable burst transfers for DBRI. Original 2.4 patch from Krzysztof
  Helt

- Make dbri_debug module parameter writable from sysfs. Remove obsolete
  write access to the /proc debug file.

- Replace udelay() with msleep_interruptible() where possible.

- Update documentation comments.

Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hifive-unleashed-5.1
Martin Habets 2005-09-10 15:39:00 +02:00 committed by Jaroslav Kysela
parent afe0f1f668
commit 4338829e09
1 changed files with 103 additions and 102 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

205
sound/sparc/dbri.c
View File

@ -1,6 +1,6 @@
/*
* Driver for DBRI sound chip found on Sparcs.
* Copyright (C) 2004 Martin Habets (mhabets@users.sourceforge.net)
* Copyright (C) 2004, 2005 Martin Habets (mhabets@users.sourceforge.net)
*
* Based entirely upon drivers/sbus/audio/dbri.c which is:
* Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de)
@ -43,6 +43,12 @@
* audio devices. But the SUN HW group decided against it, at least on my
* LX the speakerbox connector has at least 1 pin missing and 1 wrongly
* connected.
*
* I've tried to stick to the following function naming conventions:
* snd_* ALSA stuff
* cs4215_* CS4215 codec specfic stuff
* dbri_* DBRI high-level stuff
* other DBRI low-level stuff
*/
#include <sound/driver.h>
@ -87,7 +93,7 @@ MODULE_PARM_DESC(enable, "Enable Sun DBRI soundcard.");
#define D_DESC (1<<5)
static int dbri_debug = 0;
module_param(dbri_debug, int, 0444);
module_param(dbri_debug, int, 0644);
MODULE_PARM_DESC(dbri_debug, "Debug value for Sun DBRI soundcard.");
#ifdef DBRI_DEBUG
@ -320,7 +326,8 @@ typedef struct snd_dbri {
void __iomem *regs; /* dbri HW regs */
int dbri_version; /* 'e' and up is OK */
int dbri_irqp; /* intr queue pointer */
int wait_seen;
int wait_send; /* sequence of command buffers send */
int wait_ackd; /* sequence of command buffers acknowledged */
struct dbri_pipe pipes[DBRI_NO_PIPES]; /* DBRI's 32 data pipes */
struct dbri_desc descs[DBRI_NO_DESCS];
@ -625,16 +632,13 @@ static __u32 reverse_bytes(__u32 b, int len)
Commands are sent to the DBRI by building a list of them in memory,
then writing the address of the first list item to DBRI register 8.
The list is terminated with a WAIT command, which can generate a
CPU interrupt if required.
The list is terminated with a WAIT command, which generates a
CPU interrupt to signal completion.
Since the DBRI can run in parallel with the CPU, several means of
synchronization present themselves. The original scheme (Rudolf's)
was to set a flag when we "cmdlock"ed the DBRI, clear the flag when
an interrupt signaled completion, and wait on a wait_queue if a routine
attempted to cmdlock while the flag was set. The problems arose when
we tried to cmdlock from inside an interrupt handler, which might
cause scheduling in an interrupt (if we waited), etc, etc
synchronization present themselves. The method implemented here is close
to the original scheme (Rudolf's), and uses 2 counters (wait_send and
wait_ackd) to synchronize the command buffer between the CPU and the DBRI.
A more sophisticated scheme might involve a circular command buffer
or an array of command buffers. A routine could fill one with
@ -642,70 +646,75 @@ commands and link it onto a list. When a interrupt signaled
completion of the current command buffer, look on the list for
the next one.
I've decided to implement something much simpler - after each command,
the CPU waits for the DBRI to finish the command by polling the P bit
in DBRI register 0. I've tried to implement this in such a way
that might make implementing a more sophisticated scheme easier.
Every time a routine wants to write commands to the DBRI, it must
first call dbri_cmdlock() and get an initial pointer into dbri->dma->cmd
in return. After the commands have been writen, dbri_cmdsend() is
called with the final pointer value.
in return. dbri_cmdlock() will block if the previous commands have not
been completed yet. After this the commands can be written to the buffer,
and dbri_cmdsend() is called with the final pointer value to send them
to the DBRI.
*/
static void dbri_process_interrupt_buffer(snd_dbri_t * dbri);
enum dbri_lock_t { NoGetLock, GetLock };
#define MAXLOOPS 10
static volatile s32 *dbri_cmdlock(snd_dbri_t * dbri, enum dbri_lock_t get)
{
int maxloops = MAXLOOPS;
#ifndef SMP
if ((get == GetLock) && spin_is_locked(&dbri->lock)) {
printk(KERN_ERR "DBRI: cmdlock called while in spinlock.");
}
#endif
/* Delay if previous commands are still being processed */
while ((--maxloops) > 0 && (dbri->wait_send != dbri->wait_ackd)) {
msleep_interruptible(1);
/* If dbri_cmdlock() got called from inside the
* interrupt handler, this will do the processing.
*/
dbri_process_interrupt_buffer(dbri);
}
if (maxloops == 0) {
printk(KERN_ERR "DBRI: Chip never completed command buffer %d\n",
dbri->wait_send);
} else {
dprintk(D_CMD, "Chip completed command buffer (%d)\n",
MAXLOOPS - maxloops - 1);
}
/*if (get == GetLock) spin_lock(&dbri->lock); */
return &dbri->dma->cmd[0];
}
static void dbri_process_interrupt_buffer(snd_dbri_t *);
static void dbri_cmdsend(snd_dbri_t * dbri, volatile s32 * cmd)
{
int MAXLOOPS = 1000000;
int maxloops = MAXLOOPS;
volatile s32 *ptr;
u32 reg;
for (ptr = &dbri->dma->cmd[0]; ptr < cmd; ptr++) {
dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
}
if ((cmd - &dbri->dma->cmd[0]) >= DBRI_NO_CMDS - 1) {
printk("DBRI: Command buffer overflow! (bug in driver)\n");
printk(KERN_ERR "DBRI: Command buffer overflow! (bug in driver)\n");
/* Ignore the last part. */
cmd = &dbri->dma->cmd[DBRI_NO_CMDS - 3];
}
dbri->wait_send++;
dbri->wait_send &= 0xffff; /* restrict it to a 16 bit counter. */
*(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
*(cmd++) = DBRI_CMD(D_WAIT, 1, 0);
dbri->wait_seen = 0;
*(cmd++) = DBRI_CMD(D_WAIT, 1, dbri->wait_send);
/* Set command pointer and signal it is valid. */
sbus_writel(dbri->dma_dvma, dbri->regs + REG8);
while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P))
barrier();
if (maxloops == 0) {
printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
dprintk(D_CMD, "DBRI: Chip never completed command buffer\n");
} else {
while ((--maxloops) > 0 && (!dbri->wait_seen))
dbri_process_interrupt_buffer(dbri);
if (maxloops == 0) {
printk(KERN_ERR "DBRI: Chip never acked WAIT\n");
dprintk(D_CMD, "DBRI: Chip never acked WAIT\n");
} else {
dprintk(D_CMD, "Chip completed command "
"buffer (%d)\n", MAXLOOPS - maxloops);
}
}
reg = sbus_readl(dbri->regs + REG0);
reg |= D_P;
sbus_writel(reg, dbri->regs + REG0);
/*spin_unlock(&dbri->lock); */
}
@ -757,10 +766,11 @@ static void dbri_initialize(snd_dbri_t * dbri)
for (n = 0; n < DBRI_NO_PIPES; n++)
dbri->pipes[n].desc = dbri->pipes[n].first_desc = -1;
/* We should query the openprom to see what burst sizes this
* SBus supports. For now, just disable all SBus bursts */
/* A brute approach - DBRI falls back to working burst size by itself
* On SS20 D_S does not work, so do not try so high. */
tmp = sbus_readl(dbri->regs + REG0);
tmp &= ~(D_G | D_S | D_E);
tmp |= D_G | D_E;
tmp &= ~D_S;
sbus_writel(tmp, dbri->regs + REG0);
/*
@ -805,13 +815,13 @@ static void reset_pipe(snd_dbri_t * dbri, int pipe)
volatile int *cmd;
if (pipe < 0 || pipe > 31) {
printk("DBRI: reset_pipe called with illegal pipe number\n");
printk(KERN_ERR "DBRI: reset_pipe called with illegal pipe number\n");
return;
}
sdp = dbri->pipes[pipe].sdp;
if (sdp == 0) {
printk("DBRI: reset_pipe called on uninitialized pipe\n");
printk(KERN_ERR "DBRI: reset_pipe called on uninitialized pipe\n");
return;
}
@ -834,12 +844,12 @@ static void reset_pipe(snd_dbri_t * dbri, int pipe)
static void setup_pipe(snd_dbri_t * dbri, int pipe, int sdp)
{
if (pipe < 0 || pipe > 31) {
printk("DBRI: setup_pipe called with illegal pipe number\n");
printk(KERN_ERR "DBRI: setup_pipe called with illegal pipe number\n");
return;
}
if ((sdp & 0xf800) != sdp) {
printk("DBRI: setup_pipe called with strange SDP value\n");
printk(KERN_ERR "DBRI: setup_pipe called with strange SDP value\n");
/* sdp &= 0xf800; */
}
@ -872,13 +882,13 @@ static void link_time_slot(snd_dbri_t * dbri, int pipe,
int nextpipe;
if (pipe < 0 || pipe > 31 || basepipe < 0 || basepipe > 31) {
printk
("DBRI: link_time_slot called with illegal pipe number\n");
printk(KERN_ERR
"DBRI: link_time_slot called with illegal pipe number\n");
return;
}
if (dbri->pipes[pipe].sdp == 0 || dbri->pipes[basepipe].sdp == 0) {
printk("DBRI: link_time_slot called on uninitialized pipe\n");
printk(KERN_ERR "DBRI: link_time_slot called on uninitialized pipe\n");
return;
}
@ -960,8 +970,8 @@ static void unlink_time_slot(snd_dbri_t * dbri, int pipe,
int val;
if (pipe < 0 || pipe > 31 || prevpipe < 0 || prevpipe > 31) {
printk
("DBRI: unlink_time_slot called with illegal pipe number\n");
printk(KERN_ERR
"DBRI: unlink_time_slot called with illegal pipe number\n");
return;
}
@ -1001,22 +1011,22 @@ static void xmit_fixed(snd_dbri_t * dbri, int pipe, unsigned int data)
volatile s32 *cmd;
if (pipe < 16 || pipe > 31) {
printk("DBRI: xmit_fixed: Illegal pipe number\n");
printk(KERN_ERR "DBRI: xmit_fixed: Illegal pipe number\n");
return;
}
if (D_SDP_MODE(dbri->pipes[pipe].sdp) == 0) {
printk("DBRI: xmit_fixed: Uninitialized pipe %d\n", pipe);
printk(KERN_ERR "DBRI: xmit_fixed: Uninitialized pipe %d\n", pipe);
return;
}
if (D_SDP_MODE(dbri->pipes[pipe].sdp) != D_SDP_FIXED) {
printk("DBRI: xmit_fixed: Non-fixed pipe %d\n", pipe);
printk(KERN_ERR "DBRI: xmit_fixed: Non-fixed pipe %d\n", pipe);
return;
}
if (!(dbri->pipes[pipe].sdp & D_SDP_TO_SER)) {
printk("DBRI: xmit_fixed: Called on receive pipe %d\n", pipe);
printk(KERN_ERR "DBRI: xmit_fixed: Called on receive pipe %d\n", pipe);
return;
}
@ -1036,17 +1046,17 @@ static void xmit_fixed(snd_dbri_t * dbri, int pipe, unsigned int data)
static void recv_fixed(snd_dbri_t * dbri, int pipe, volatile __u32 * ptr)
{
if (pipe < 16 || pipe > 31) {
printk("DBRI: recv_fixed called with illegal pipe number\n");
printk(KERN_ERR "DBRI: recv_fixed called with illegal pipe number\n");
return;
}
if (D_SDP_MODE(dbri->pipes[pipe].sdp) != D_SDP_FIXED) {
printk("DBRI: recv_fixed called on non-fixed pipe %d\n", pipe);
printk(KERN_ERR "DBRI: recv_fixed called on non-fixed pipe %d\n", pipe);
return;
}
if (dbri->pipes[pipe].sdp & D_SDP_TO_SER) {
printk("DBRI: recv_fixed called on transmit pipe %d\n", pipe);
printk(KERN_ERR "DBRI: recv_fixed called on transmit pipe %d\n", pipe);
return;
}
@ -1075,12 +1085,12 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
int last_desc = -1;
if (info->pipe < 0 || info->pipe > 15) {
printk("DBRI: setup_descs: Illegal pipe number\n");
printk(KERN_ERR "DBRI: setup_descs: Illegal pipe number\n");
return -2;
}
if (dbri->pipes[info->pipe].sdp == 0) {
printk("DBRI: setup_descs: Uninitialized pipe %d\n",
printk(KERN_ERR "DBRI: setup_descs: Uninitialized pipe %d\n",
info->pipe);
return -2;
}
@ -1090,20 +1100,20 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
if (streamno == DBRI_PLAY) {
if (!(dbri->pipes[info->pipe].sdp & D_SDP_TO_SER)) {
printk("DBRI: setup_descs: Called on receive pipe %d\n",
printk(KERN_ERR "DBRI: setup_descs: Called on receive pipe %d\n",
info->pipe);
return -2;
}
} else {
if (dbri->pipes[info->pipe].sdp & D_SDP_TO_SER) {
printk
("DBRI: setup_descs: Called on transmit pipe %d\n",
printk(KERN_ERR
"DBRI: setup_descs: Called on transmit pipe %d\n",
info->pipe);
return -2;
}
/* Should be able to queue multiple buffers to receive on a pipe */
if (pipe_active(dbri, info->pipe)) {
printk("DBRI: recv_on_pipe: Called on active pipe %d\n",
printk(KERN_ERR "DBRI: recv_on_pipe: Called on active pipe %d\n",
info->pipe);
return -2;
}
@ -1120,7 +1130,7 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
break;
}
if (desc == DBRI_NO_DESCS) {
printk("DBRI: setup_descs: No descriptors\n");
printk(KERN_ERR "DBRI: setup_descs: No descriptors\n");
return -1;
}
@ -1165,7 +1175,7 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
}
if (first_desc == -1 || last_desc == -1) {
printk("DBRI: setup_descs: Not enough descriptors available\n");
printk(KERN_ERR "DBRI: setup_descs: Not enough descriptors available\n");
return -1;
}
@ -1270,7 +1280,7 @@ static void reset_chi(snd_dbri_t * dbri, enum master_or_slave master_or_slave,
int divisor = 12288 / clockrate;
if (divisor > 255 || divisor * clockrate != 12288)
printk("DBRI: illegal bits_per_frame in setup_chi\n");
printk(KERN_ERR "DBRI: illegal bits_per_frame in setup_chi\n");
*(cmd++) = DBRI_CMD(D_CHI, 0, D_CHI_CHICM(divisor) | D_CHI_FD
| D_CHI_BPF(bits_per_frame));
@ -1474,7 +1484,6 @@ static int cs4215_setctrl(snd_dbri_t * dbri)
/* Temporarily mute outputs, and wait 1/8000 sec (125 us)
* to make sure this takes. This avoids clicking noises.
*/
cs4215_setdata(dbri, 1);
udelay(125);
@ -1530,8 +1539,8 @@ static int cs4215_setctrl(snd_dbri_t * dbri)
tmp |= D_C; /* Enable CHI */
sbus_writel(tmp, dbri->regs + REG0);
for (i = 64; ((dbri->mm.status & 0xe4) != 0x20); --i) {
udelay(125);
for (i = 10; ((dbri->mm.status & 0xe4) != 0x20); --i) {
msleep_interruptible(1);
}
if (i == 0) {
dprintk(D_MM, "CS4215 didn't respond to CLB (0x%02x)\n",
@ -1678,8 +1687,8 @@ buffer and calls dbri_process_one_interrupt() for each interrupt word.
Complicated interrupts are handled by dedicated functions (which
appear first in this file). Any pending interrupts can be serviced by
calling dbri_process_interrupt_buffer(), which works even if the CPU's
interrupts are disabled. This function is used by dbri_cmdsend()
to make sure we're synced up with the chip after each command sequence,
interrupts are disabled. This function is used by dbri_cmdlock()
to make sure we're synced up with the chip before each command sequence,
even if we're running cli'ed.
*/
@ -1765,11 +1774,13 @@ DECLARE_TASKLET(xmit_descs_task, xmit_descs, 0);
* Called by main interrupt handler when DBRI signals transmission complete
* on a pipe (interrupt triggered by the B bit in a transmit descriptor).
*
* Walks through the pipe's list of transmit buffer descriptors, releasing
* each one's DMA buffer (if present), flagging the descriptor available,
* and signaling its callback routine (if present), before proceeding
* to the next one. Stops when the first descriptor is found without
* Walks through the pipe's list of transmit buffer descriptors and marks
* them as available. Stops when the first descriptor is found without
* TBC (Transmit Buffer Complete) set, or we've run through them all.
*
* The DMA buffers are not released, but re-used. Since the transmit buffer
* descriptors are not clobbered, they can be re-submitted as is. This is
* done by the xmit_descs() tasklet above since that could take longer.
*/
static void transmission_complete_intr(snd_dbri_t * dbri, int pipe)
@ -1885,7 +1896,11 @@ static void dbri_process_one_interrupt(snd_dbri_t * dbri, int x)
}
if (channel == D_INTR_CMD && command == D_WAIT) {
dbri->wait_seen++;
dbri->wait_ackd = val;
if (dbri->wait_send != val) {
printk(KERN_ERR "Processing wait command %d when %d was send.\n",
val, dbri->wait_send);
}
return;
}
@ -1994,8 +2009,7 @@ static irqreturn_t snd_dbri_interrupt(int irq, void *dev_id,
* The only one I've seen is MRR, which will be triggered
* if you let a transmit pipe underrun, then try to CDP it.
*
* If these things persist, we should probably reset
* and re-init the chip.
* If these things persist, we reset the chip.
*/
if ((++errcnt) % 10 == 0) {
dprintk(D_INT, "Interrupt errors exceeded.\n");
@ -2094,7 +2108,7 @@ static int snd_dbri_hw_params(snd_pcm_substream_t * substream,
if ((ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params))) < 0) {
snd_printk(KERN_ERR "malloc_pages failed with %d\n", ret);
printk(KERN_ERR "malloc_pages failed with %d\n", ret);
return ret;
}
@ -2455,8 +2469,7 @@ static int __init snd_dbri_mixer(snd_dbri_t * dbri)
for (idx = 0; idx < NUM_CS4215_CONTROLS; idx++) {
if ((err = snd_ctl_add(card,
snd_ctl_new1(&dbri_controls[idx],
dbri))) < 0)
snd_ctl_new1(&dbri_controls[idx], dbri))) < 0)
return err;
}
@ -2490,8 +2503,6 @@ static void dbri_debug_read(snd_info_entry_t * entry,
int pipe;
snd_iprintf(buffer, "debug=%d\n", dbri_debug);
snd_iprintf(buffer, "CHI pipe in=%d, out=%d\n",
dbri->chi_in_pipe, dbri->chi_out_pipe);
for (pipe = 0; pipe < 32; pipe++) {
if (pipe_active(dbri, pipe)) {
struct dbri_pipe *pptr = &dbri->pipes[pipe];
@ -2506,18 +2517,6 @@ static void dbri_debug_read(snd_info_entry_t * entry,
}
}
}
static void dbri_debug_write(snd_info_entry_t * entry,
snd_info_buffer_t * buffer)
{
char line[80];
int i;
if (snd_info_get_line(buffer, line, 80) == 0) {
sscanf(line, "%d\n", &i);
dbri_debug = i & 0x3f;
}
}
#endif
void snd_dbri_proc(snd_dbri_t * dbri)
@ -2531,9 +2530,7 @@ void snd_dbri_proc(snd_dbri_t * dbri)
#ifdef DBRI_DEBUG
err = snd_card_proc_new(dbri->card, "debug", &entry);
snd_info_set_text_ops(entry, dbri, 4096, dbri_debug_read);
entry->mode = S_IFREG | S_IRUGO | S_IWUSR; /* Writable for root */
entry->c.text.write_size = 256;
entry->c.text.write = dbri_debug_write;
entry->mode = S_IFREG | S_IRUGO; /* Readable only. */
#endif
}
@ -2637,7 +2634,11 @@ static int __init dbri_attach(int prom_node, struct sbus_dev *sdev)
return -ENOENT;
}
prom_getproperty(prom_node, "intr", (char *)&irq, sizeof(irq));
err = prom_getproperty(prom_node, "intr", (char *)&irq, sizeof(irq));
if (err < 0) {
printk(KERN_ERR "DBRI-%d: Firmware node lacks IRQ property.\n", dev);
return -ENODEV;
}
card = snd_card_new(index[dev], id[dev], THIS_MODULE,
sizeof(snd_dbri_t));