ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410
commit5.4-rM2-2.2.x-imx-squashed3d992fd8f4
upstream. The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3 controllers are on Exynos5410 regular GPIOs. This is different than for example on Exynos5422 where these are special ETC pins with proper reset values (pulls, functions). Therefore these pins should be configured to enable proper USB 3.0 peripheral and host modes. This also fixes over-current warning: [ 6.024658] usb usb4-port1: over-current condition [ 6.028271] usb usb3-port1: over-current condition Fixes:cb08965622
("ARM: dts: exynos: Add USB to Exynos5410") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-2-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
parent
2c6f6cd2cd
commit
43598dbdcb
|
@ -560,6 +560,34 @@
|
|||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
usb3_1_oc: usb3-1-oc {
|
||||
samsung,pins = "gpk2-4", "gpk2-5";
|
||||
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
||||
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
||||
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
||||
};
|
||||
|
||||
usb3_1_vbusctrl: usb3-1-vbusctrl {
|
||||
samsung,pins = "gpk2-6", "gpk2-7";
|
||||
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
||||
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
|
||||
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
||||
};
|
||||
|
||||
usb3_0_oc: usb3-0-oc {
|
||||
samsung,pins = "gpk3-0", "gpk3-1";
|
||||
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
||||
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
||||
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
||||
};
|
||||
|
||||
usb3_0_vbusctrl: usb3-0-vbusctrl {
|
||||
samsung,pins = "gpk3-2", "gpk3-3";
|
||||
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
||||
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
|
||||
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_2 {
|
||||
|
|
|
@ -398,6 +398,8 @@
|
|||
&usbdrd3_0 {
|
||||
clocks = <&clock CLK_USBD300>;
|
||||
clock-names = "usbdrd30";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
|
||||
};
|
||||
|
||||
&usbdrd_phy0 {
|
||||
|
@ -409,6 +411,8 @@
|
|||
&usbdrd3_1 {
|
||||
clocks = <&clock CLK_USBD301>;
|
||||
clock-names = "usbdrd30";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
|
|
Loading…
Reference in New Issue