redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux 

* 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux:
  i2c-intel-mid: Driver depends on PCI
  i2c-intel-mid: support for Moorestown and Medfield platform
  i2c-nomadik: fixup bus delays
  i2c-nomadik: support smbus emulation
  i2c-nomadik: dynamic clocking
  i2c-nomadik: documentation fixes
  i2c-s3c2410: Enable i2c clock only when doing some transfert
hifive-unleashed-5.1
Linus Torvalds 2010-10-29 16:15:57 -07:00
parent 91ab9bf7c5 9cc11dee3d
commit 44234d0c46
5 changed files with 1176 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/i2c/busses/Kconfig
View File

@ -396,6 +396,16 @@ config I2C_IMX
This driver can also be built as a module. If so, the module
will be called i2c-imx.
config I2C_INTEL_MID
tristate "Intel Moorestown/Medfield Platform I2C controller"
depends on PCI
help
Say Y here if you have an Intel Moorestown/Medfield platform I2C
controller.
This support is also available as a module. If so, the module
will be called i2c-intel-mid.
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX

1
drivers/i2c/busses/Makefile
View File

@ -38,6 +38,7 @@ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o

1135
drivers/i2c/busses/i2c-intel-mid.c 100644
View File

File diff suppressed because it is too large Load Diff

36
drivers/i2c/busses/i2c-nomadik.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (C) 2009 ST-Ericsson
* Copyright (C) 2009 ST-Ericsson SA
* Copyright (C) 2009 STMicroelectronics
*
* I2C master mode controller driver, used in Nomadik 8815
@ -103,6 +103,9 @@
/* maximum threshold value */
#define MAX_I2C_FIFO_THRESHOLD 15
/* per-transfer delay, required for the hardware to stabilize */
#define I2C_DELAY 150
enum i2c_status {
I2C_NOP,
I2C_ON_GOING,
@ -118,7 +121,7 @@ enum i2c_operation {
};
/* controller response timeout in ms */
#define I2C_TIMEOUT_MS 500
#define I2C_TIMEOUT_MS 2000
/**
* struct i2c_nmk_client - client specific data
@ -250,6 +253,8 @@ static int init_hw(struct nmk_i2c_dev *dev)
{
int stat;
clk_enable(dev->clk);
stat = flush_i2c_fifo(dev);
if (stat)
return stat;
@ -263,6 +268,9 @@ static int init_hw(struct nmk_i2c_dev *dev)
dev->cli.operation = I2C_NO_OPERATION;
clk_disable(dev->clk);
udelay(I2C_DELAY);
return 0;
}
@ -431,7 +439,6 @@ static int read_i2c(struct nmk_i2c_dev *dev)
(void) init_hw(dev);
status = -ETIMEDOUT;
}
return status;
}
@ -502,9 +509,9 @@ static int write_i2c(struct nmk_i2c_dev *dev)
/**
* nmk_i2c_xfer() - I2C transfer function used by kernel framework
* @i2c_adap - Adapter pointer to the controller
* @msgs[] - Pointer to data to be written.
* @num_msgs - Number of messages to be executed
* @i2c_adap: Adapter pointer to the controller
* @msgs: Pointer to data to be written.
* @num_msgs: Number of messages to be executed
*
* This is the function called by the generic kernel i2c_transfer()
* or i2c_smbus...() API calls. Note that this code is protected by the
@ -559,6 +566,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
if (status)
return status;
clk_enable(dev->clk);
/* setup the i2c controller */
setup_i2c_controller(dev);
@ -591,10 +600,13 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
dev_err(&dev->pdev->dev, "%s\n",
cause >= ARRAY_SIZE(abort_causes)
? "unknown reason" : abort_causes[cause]);
clk_disable(dev->clk);
return status;
}
mdelay(1);
udelay(I2C_DELAY);
}
clk_disable(dev->clk);
/* return the no. messages processed */
if (status)
return status;
@ -605,6 +617,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
/**
* disable_interrupts() - disable the interrupts
* @dev: private data of controller
* @irq: interrupt number
*/
static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
{
@ -794,10 +807,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA
| I2C_FUNC_SMBUS_I2C_BLOCK;
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm nmk_i2c_algo = {
@ -857,8 +867,6 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
goto err_no_clk;
}
clk_enable(dev->clk);
adap = &dev->adap;
adap->dev.parent = &pdev->dev;
adap->owner = THIS_MODULE;
@ -895,7 +903,6 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
return 0;
err_init_hw:
clk_disable(dev->clk);
err_add_adap:
clk_put(dev->clk);
err_no_clk:
@ -928,7 +935,6 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
iounmap(dev->virtbase);
if (res)
release_mem_region(res->start, resource_size(res));
clk_disable(dev->clk);
clk_put(dev->clk);
platform_set_drvdata(pdev, NULL);
kfree(dev);

10
drivers/i2c/busses/i2c-s3c2410.c
View File

@ -554,18 +554,23 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
int retry;
int ret;
clk_enable(i2c->clk);
for (retry = 0; retry < adap->retries; retry++) {
ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
if (ret != -EAGAIN)
if (ret != -EAGAIN) {
clk_disable(i2c->clk);
return ret;
}
dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
udelay(100);
}
clk_disable(i2c->clk);
return -EREMOTEIO;
}
@ -910,6 +915,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
clk_disable(i2c->clk);
return 0;
err_cpufreq:
@ -977,7 +983,9 @@ static int s3c24xx_i2c_resume(struct device *dev)
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
i2c->suspended = 0;
clk_enable(i2c->clk);
s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
return 0;
}