redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 

We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.

Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
zero-sugar-mainline-defconfig
Jakub Kicinski 2020-09-04 21:18:58 -07:00
parent 3ab1270bfa c70672d8d3
commit 44a8c4f33c
1669 changed files with 8287 additions and 5744 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/RCU/lockdep.rst
View File

@ -49,7 +49,7 @@ checking of rcu_dereference() primitives:
is invoked by both RCU-sched readers and updaters.
srcu_dereference_check(p, c):
Use explicit check expression "c" along with
srcu_read_lock_held()(). This is useful in code that
srcu_read_lock_held(). This is useful in code that
is invoked by both SRCU readers and updaters.
rcu_dereference_raw(p):
Don't check. (Use sparingly, if at all.)

2
Documentation/admin-guide/devices.txt
View File

@ -1662,7 +1662,7 @@
98 block User-mode virtual block device
0 = /dev/ubda First user-mode block device
16 = /dev/udbb Second user-mode block device
16 = /dev/ubdb Second user-mode block device
...
Partitions are handled in the same way as for IDE

2
Documentation/admin-guide/laptops/thinkpad-acpi.rst
View File

@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles.
DYTC Lapmode sensor
------------------
-------------------
sysfs: dytc_lapmode

8
Documentation/admin-guide/pm/intel_pstate.rst
View File

@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
internal P-state selection logic is expected to focus entirely on performance.
This will override the EPP/EPB setting coming from the ``sysfs`` interface
(see `Energy vs Performance Hints`_ below).
(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change
the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this
configuration will be rejected.
Also, in this configuration the range of P-states available to the processor's
internal P-state selection logic is always restricted to the upper boundary
@ -564,8 +566,8 @@ Energy-Performance Preference (EPP) knob (if supported) or its
Energy-Performance Bias (EPB) knob. It is also possible to write a positive
integer value between 0 to 255, if the EPP feature is present. If the EPP
feature is not present, writing integer value to this attribute is not
supported. In this case, user can use
"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.
supported. In this case, user can use the
"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.
[Note that tasks may by migrated from one CPU to another by the scheduler's
load-balancing algorithm and if different energy vs performance hints are

66
Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
View File

@ -1,66 +0,0 @@
Texas Instruments K3 Interrupt Aggregator
=========================================
The Interrupt Aggregator (INTA) provides a centralized machine
which handles the termination of system events to that they can
be coherently processed by the host(s) in the system. A maximum
of 64 events can be mapped to a single interrupt.
Interrupt Aggregator
+-----------------------------------------+
| Intmap VINT |
| +--------------+ +------------+ |
m ------>| | vint | bit | | 0 |.....|63| vint0 |
. | +--------------+ +------------+ | +------+
. | . . | | HOST |
Globalevents ------>| . . |------>| IRQ |
. | . . | | CTRL |
. | . . | +------+
n ------>| +--------------+ +------------+ |
| | vint | bit | | 0 |.....|63| vintx |
| +--------------+ +------------+ |
| |
+-----------------------------------------+
Configuration of these Intmap registers that maps global events to vint is done
by a system controller (like the Device Memory and Security Controller on K3
AM654 SoC). Driver should request the system controller to get the range
of global events and vints assigned to the requesting host. Management
of these requested resources should be handled by driver and requests
system controller to map specific global event to vint, bit pair.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol). For more details refer:
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
TISCI Interrupt Aggregator Node:
-------------------------------
- compatible: Must be "ti,sci-inta".
- reg: Should contain registers location and length.
- interrupt-controller: Identifies the node as an interrupt controller
- msi-controller: Identifies the node as an MSI controller.
- interrupt-parent: phandle of irq parent.
- ti,sci: Phandle to TI-SCI compatible System controller node.
- ti,sci-dev-id: TISCI device ID of the Interrupt Aggregator.
- ti,sci-rm-range-vint: Array of TISCI subtype ids representing vints(inta
outputs) range within this INTA, assigned to the
requesting host context.
- ti,sci-rm-range-global-event: Array of TISCI subtype ids representing the
global events range reaching this IA and are assigned
to the requesting host context.
Example:
--------
main_udmass_inta: interrupt-controller@33d00000 {
compatible = "ti,sci-inta";
reg = <0x0 0x33d00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
interrupt-parent = <&main_navss_intr>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,sci-rm-range-vint = <0x0>;
ti,sci-rm-range-global-event = <0x1>;
};

98
Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml 100644
View File

@ -0,0 +1,98 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments K3 Interrupt Aggregator
maintainers:
- Lokesh Vutla <lokeshvutla@ti.com>
allOf:
- $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
description: |
The Interrupt Aggregator (INTA) provides a centralized machine
which handles the termination of system events to that they can
be coherently processed by the host(s) in the system. A maximum
of 64 events can be mapped to a single interrupt.
Interrupt Aggregator
+-----------------------------------------+
| Intmap VINT |
| +--------------+ +------------+ |
m ------>| | vint | bit | | 0 |.....|63| vint0 |
. | +--------------+ +------------+ | +------+
. | . . | | HOST |
Globalevents ------>| . . |----->| IRQ |
. | . . | | CTRL |
. | . . | +------+
n ------>| +--------------+ +------------+ |
| | vint | bit | | 0 |.....|63| vintx |
| +--------------+ +------------+ |
| |
+-----------------------------------------+
Configuration of these Intmap registers that maps global events to vint is
done by a system controller (like the Device Memory and Security Controller
on AM654 SoC). Driver should request the system controller to get the range
of global events and vints assigned to the requesting host. Management
of these requested resources should be handled by driver and requests
system controller to map specific global event to vint, bit pair.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol).
properties:
compatible:
const: ti,sci-inta
reg:
maxItems: 1
interrupt-controller: true
msi-controller: true
ti,interrupt-ranges:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
Interrupt ranges that converts the INTA output hw irq numbers
to parents's input interrupt numbers.
items:
items:
- description: |
"output_irq" specifies the base for inta output irq
- description: |
"parent's input irq" specifies the base for parent irq
- description: |
"limit" specifies the limit for translation
required:
- compatible
- reg
- interrupt-controller
- msi-controller
- ti,sci
- ti,sci-dev-id
- ti,interrupt-ranges
examples:
- |
bus {
#address-cells = <2>;
#size-cells = <2>;
main_udmass_inta: msi-controller@33d00000 {
compatible = "ti,sci-inta";
reg = <0x0 0x33d00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
interrupt-parent = <&main_navss_intr>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,interrupt-ranges = <0 0 256>;
};
};

82
Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
View File

@ -1,82 +0,0 @@
Texas Instruments K3 Interrupt Router
=====================================
The Interrupt Router (INTR) module provides a mechanism to mux M
interrupt inputs to N interrupt outputs, where all M inputs are selectable
to be driven per N output. An Interrupt Router can either handle edge triggered
or level triggered interrupts and that is fixed in hardware.
Interrupt Router
+----------------------+
| Inputs Outputs |
+-------+ | +------+ +-----+ |
| GPIO |----------->| | irq0 | | 0 | | Host IRQ
+-------+ | +------+ +-----+ | controller
| . . | +-------+
+-------+ | . . |----->| IRQ |
| INTA |----------->| . . | +-------+
+-------+ | . +-----+ |
| +------+ | N | |
| | irqM | +-----+ |
| +------+ |
| |
+----------------------+
There is one register per output (MUXCNTL_N) that controls the selection.
Configuration of these MUXCNTL_N registers is done by a system controller
(like the Device Memory and Security Controller on K3 AM654 SoC). System
controller will keep track of the used and unused registers within the Router.
Driver should request the system controller to get the range of GIC IRQs
assigned to the requesting hosts. It is the drivers responsibility to keep
track of Host IRQs.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol). For more details refer:
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
TISCI Interrupt Router Node:
----------------------------
Required Properties:
- compatible: Must be "ti,sci-intr".
- ti,intr-trigger-type: Should be one of the following:
1: If intr supports edge triggered interrupts.
4: If intr supports level triggered interrupts.
- interrupt-controller: Identifies the node as an interrupt controller
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source. The value should be 2.
First cell should contain the TISCI device ID of source
Second cell should contain the interrupt source offset
within the device.
- ti,sci: Phandle to TI-SCI compatible System controller node.
- ti,sci-dst-id: TISCI device ID of the destination IRQ controller.
- ti,sci-rm-range-girq: Array of TISCI subtype ids representing the host irqs
assigned to this interrupt router. Each subtype id
corresponds to a range of host irqs.
For more details on TISCI IRQ resource management refer:
https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
Example:
--------
The following example demonstrates both interrupt router node and the consumer
node(main gpio) on the AM654 SoC:
main_intr: interrupt-controller0 {
compatible = "ti,sci-intr";
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x1>;
};
main_gpio0: gpio@600000 {
...
interrupt-parent = <&main_intr>;
interrupts = <57 256>, <57 257>, <57 258>,
<57 259>, <57 260>, <57 261>;
...
};

102
Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml 100644
View File

@ -0,0 +1,102 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments K3 Interrupt Router
maintainers:
- Lokesh Vutla <lokeshvutla@ti.com>
allOf:
- $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
description: |
The Interrupt Router (INTR) module provides a mechanism to mux M
interrupt inputs to N interrupt outputs, where all M inputs are selectable
to be driven per N output. An Interrupt Router can either handle edge
triggered or level triggered interrupts and that is fixed in hardware.
Interrupt Router
+----------------------+
| Inputs Outputs |
+-------+ | +------+ +-----+ |
| GPIO |----------->| | irq0 | | 0 | | Host IRQ
+-------+ | +------+ +-----+ | controller
| . . | +-------+
+-------+ | . . |----->| IRQ |
| INTA |----------->| . . | +-------+
+-------+ | . +-----+ |
| +------+ | N | |
| | irqM | +-----+ |
| +------+ |
| |
+----------------------+
There is one register per output (MUXCNTL_N) that controls the selection.
Configuration of these MUXCNTL_N registers is done by a system controller
(like the Device Memory and Security Controller on K3 AM654 SoC). System
controller will keep track of the used and unused registers within the Router.
Driver should request the system controller to get the range of GIC IRQs
assigned to the requesting hosts. It is the drivers responsibility to keep
track of Host IRQs.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol).
properties:
compatible:
const: ti,sci-intr
ti,intr-trigger-type:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 4]
description: |
Should be one of the following.
1 = If intr supports edge triggered interrupts.
4 = If intr supports level triggered interrupts.
interrupt-controller: true
'#interrupt-cells':
const: 1
description: |
The 1st cell should contain interrupt router input hw number.
ti,interrupt-ranges:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
Interrupt ranges that converts the INTR output hw irq numbers
to parents's input interrupt numbers.
items:
items:
- description: |
"output_irq" specifies the base for intr output irq
- description: |
"parent's input irq" specifies the base for parent irq
- description: |
"limit" specifies the limit for translation
required:
- compatible
- ti,intr-trigger-type
- interrupt-controller
- '#interrupt-cells'
- ti,sci
- ti,sci-dev-id
- ti,interrupt-ranges
examples:
- |
main_gpio_intr: interrupt-controller0 {
compatible = "ti,sci-intr";
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <131>;
ti,interrupt-ranges = <0 360 32>;
};

10
Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
View File

@ -30,9 +30,13 @@ allOf:
then:
properties:
clock-output-names:
items:
- const: clk_out_sd0
- const: clk_in_sd0
oneOf:
- items:
- const: clk_out_sd0
- const: clk_in_sd0
- items:
- const: clk_out_sd1
- const: clk_in_sd1
properties:
compatible:

2
Documentation/devicetree/bindings/mmc/mtk-sd.txt
View File

@ -50,6 +50,8 @@ Optional properties:
error caused by stop clock(fifo full)
Valid range = [0:0x7]. if not present, default value is 0.
applied to compatible "mediatek,mt2701-mmc".
- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
- reset-names: Should be "hrst".
Examples:
mmc0: mmc@11230000 {

32
Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
View File

@ -15,8 +15,15 @@ Required properties:
- "nvidia,tegra210-sdhci": for Tegra210
- "nvidia,tegra186-sdhci": for Tegra186
- "nvidia,tegra194-sdhci": for Tegra194
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
One for the module clock and one for the timeout clock.
For all other Tegra devices, must contain a single entry for
the module clock. See ../clocks/clock-bindings.txt for details.
- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
strings 'sdhci' and 'tmclk' to represent the module and
the timeout clocks, respectively.
For all other Tegra devices must contain the string 'sdhci'
to represent the module clock.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
Example:
sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@ -115,3 +122,22 @@ sdhci@700b0000 {
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};
sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 14>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
pinctrl-0 = <&sdmmc1_3v3>;
pinctrl-1 = <&sdmmc1_1v8>;
nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};

2
Documentation/devicetree/bindings/net/dsa/dsa.txt
View File

@ -1,4 +1,4 @@
Distributed Switch Architecture Device Tree Bindings
----------------------------------------------------
See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation.
See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.

6
Documentation/driver-api/fpga/fpga-bridge.rst
View File

@ -6,9 +6,9 @@ API to implement a new FPGA bridge
* struct :c:type:`fpga_bridge` — The FPGA Bridge structure
* struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops
* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct
* :c:func:`fpga_bridge_register()` — Register a bridge
* :c:func:`fpga_bridge_unregister()` — Unregister a bridge
* devm_fpga_bridge_create() — Allocate and init a bridge struct
* fpga_bridge_register() — Register a bridge
* fpga_bridge_unregister() — Unregister a bridge
.. kernel-doc:: include/linux/fpga/fpga-bridge.h
:functions: fpga_bridge

6
Documentation/driver-api/fpga/fpga-mgr.rst
View File

@ -104,9 +104,9 @@ API for implementing a new FPGA Manager driver
* ``fpga_mgr_states`` — Values for :c:member:`fpga_manager->state`.
* struct :c:type:`fpga_manager` — the FPGA manager struct
* struct :c:type:`fpga_manager_ops` — Low level FPGA manager driver ops
* :c:func:`devm_fpga_mgr_create` — Allocate and init a manager struct
* :c:func:`fpga_mgr_register` — Register an FPGA manager
* :c:func:`fpga_mgr_unregister` — Unregister an FPGA manager
* devm_fpga_mgr_create() — Allocate and init a manager struct
* fpga_mgr_register() — Register an FPGA manager
* fpga_mgr_unregister() — Unregister an FPGA manager
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_mgr_states

16
Documentation/driver-api/fpga/fpga-programming.rst
View File

@ -6,9 +6,9 @@ Overview
The in-kernel API for FPGA programming is a combination of APIs from
FPGA manager, bridge, and regions. The actual function used to
trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
trigger FPGA programming is fpga_region_program_fpga().
:c:func:`fpga_region_program_fpga()` uses functionality supplied by
fpga_region_program_fpga() uses functionality supplied by
the FPGA manager and bridges. It will:
* lock the region's mutex
@ -20,8 +20,8 @@ the FPGA manager and bridges. It will:
* release the locks
The struct fpga_image_info specifies what FPGA image to program. It is
allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with
:c:func:`fpga_image_info_free()`
allocated/freed by fpga_image_info_alloc() and freed with
fpga_image_info_free()
How to program an FPGA using a region
-------------------------------------
@ -84,10 +84,10 @@ will generate that list. Here's some sample code of what to do next::
API for programming an FPGA
---------------------------
* :c:func:`fpga_region_program_fpga` — Program an FPGA
* :c:type:`fpga_image_info` — Specifies what FPGA image to program
* :c:func:`fpga_image_info_alloc()` — Allocate an FPGA image info struct
* :c:func:`fpga_image_info_free()` — Free an FPGA image info struct
* fpga_region_program_fpga() — Program an FPGA
* fpga_image_info() — Specifies what FPGA image to program
* fpga_image_info_alloc() — Allocate an FPGA image info struct
* fpga_image_info_free() — Free an FPGA image info struct
.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_program_fpga

18
Documentation/driver-api/fpga/fpga-region.rst
View File

@ -46,18 +46,18 @@ API to add a new FPGA region
----------------------------
* struct :c:type:`fpga_region` — The FPGA region struct
* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
* :c:func:`fpga_region_register` — Register an FPGA region
* :c:func:`fpga_region_unregister` — Unregister an FPGA region
* devm_fpga_region_create() — Allocate and init a region struct
* fpga_region_register() — Register an FPGA region
* fpga_region_unregister() — Unregister an FPGA region
The FPGA region's probe function will need to get a reference to the FPGA
Manager it will be using to do the programming. This usually would happen
during the region's probe function.
* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count
* :c:func:`of_fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count,
* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count
* of_fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count,
given a device node.
* :c:func:`fpga_mgr_put` — Put an FPGA manager
* fpga_mgr_put() — Put an FPGA manager
The FPGA region will need to specify which bridges to control while programming
the FPGA. The region driver can build a list of bridges during probe time
@ -66,11 +66,11 @@ the list of bridges to program just before programming
(:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the
following APIs to handle building or tearing down that list.
* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
list
* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
list, given a device node
* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
* fpga_bridges_put() — Given a list of bridges, put them
.. kernel-doc:: include/linux/fpga/fpga-region.h
:functions: fpga_region

16
Documentation/driver-api/iio/core.rst
View File

@ -11,10 +11,10 @@ Industrial I/O Devices
----------------------
* struct :c:type:`iio_dev` - industrial I/O device
* :c:func:`iio_device_alloc()` - allocate an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_register()` - register a device with the IIO subsystem
* :c:func:`iio_device_unregister()` - unregister a device from the IIO
* iio_device_alloc() - allocate an :c:type:`iio_dev` from a driver
* iio_device_free() - free an :c:type:`iio_dev` from a driver
* iio_device_register() - register a device with the IIO subsystem
* iio_device_unregister() - unregister a device from the IIO
subsystem
An IIO device usually corresponds to a single hardware sensor and it
@ -34,17 +34,17 @@ A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or
At probe:
1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device.
1. Call iio_device_alloc(), which allocates memory for an IIO device.
2. Initialize IIO device fields with driver specific information (e.g.
device name, device channels).
3. Call :c:func:`iio_device_register()`, this registers the device with the
3. Call iio_device_register(), this registers the device with the
IIO core. After this call the device is ready to accept requests from user
space applications.
At remove, we free the resources allocated in probe in reverse order:
1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core.
2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device.
1. iio_device_unregister(), unregister the device from the IIO core.
2. iio_device_free(), free the memory allocated for the IIO device.
IIO device sysfs interface
==========================

2
Documentation/fault-injection/nvme-fault-injection.rst
View File

@ -3,7 +3,7 @@ NVMe Fault Injection
Linux's fault injection framework provides a systematic way to support
error injection via debugfs in the /sys/kernel/debug directory. When
enabled, the default NVME_SC_INVALID_OPCODE with no retry will be
injected into the nvme_end_request. Users can change the default status
injected into the nvme_try_complete_req. Users can change the default status
code and no retry flag via the debugfs. The list of Generic Command
Status can be found in include/linux/nvme.h

16
Documentation/filesystems/affs.rst
View File

@ -110,13 +110,15 @@ The Amiga protection flags RWEDRWEDHSPARWED are handled as follows:
- R maps to r for user, group and others. On directories, R implies x.
- If both W and D are allowed, w will be set.
- W maps to w.
- E maps to x.
- H and P are always retained and ignored under Linux.
- D is ignored.
- A is always reset when a file is written to.
- H, S and P are always retained and ignored under Linux.
- A is cleared when a file is written to.
User id and group id will be used unless set[gu]id are given as mount
options. Since most of the Amiga file systems are single user systems
@ -128,11 +130,13 @@ Linux -> Amiga:
The Linux rwxrwxrwx file mode is handled as follows:
- r permission will set R for user, group and others.
- r permission will allow R for user, group and others.
- w permission will set W and D for user, group and others.
- w permission will allow W for user, group and others.
- x permission of the user will set E for plain files.
- x permission of the user will allow E for plain files.
- D will be allowed for user, group and others.
- All other flags (suid, sgid, ...) are ignored and will
not be retained.

6
Documentation/hwmon/abituguru-datasheet.rst
View File

@ -68,7 +68,7 @@ See below for all known bank addresses, numbers of sensors in that bank,
number of bytes data per sensor and contents/meaning of those bytes.
Although both this document and the kernel driver have kept the sensor
terminoligy for the addressing within a bank this is not 100% correct, in
terminology for the addressing within a bank this is not 100% correct, in
bank 0x24 for example the addressing within the bank selects a PWM output not
a sensor.
@ -155,7 +155,7 @@ After wider testing of the Linux kernel driver some variants of the uGuru have
turned up which do not hold 0x08 at DATA within 250 reads after writing the
bank address. With these versions this happens quite frequent, using larger
timeouts doesn't help, they just go offline for a second or 2, doing some
internal callibration or whatever. Your code should be prepared to handle
internal calibration or whatever. Your code should be prepared to handle
this and in case of no response in this specific case just goto sleep for a
while and then retry.
@ -331,6 +331,6 @@ the voltage / clock programming out, I tried reading and only reading banks
0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this
resulted in a _permanent_ reprogramming of the voltages, luckily I had the
sensors part configured so that it would shutdown my system on any out of spec
voltages which proprably safed my computer (after a reboot I managed to
voltages which probably safed my computer (after a reboot I managed to
immediately enter the bios and reload the defaults). This probably means that
the read/write cycle for the non sensor part is different from the sensor part.

4
Documentation/hwmon/abituguru.rst
View File

@ -17,7 +17,7 @@ Supported chips:
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
firmware and thus effectively many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
@ -33,7 +33,7 @@ Supported chips:
sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
this does not always work. For these uGuru's the autodetection can
be overridden with the bank1_types module param. For all 3 known
revison 1 motherboards the correct use of this param is:
revision 1 motherboards the correct use of this param is:
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
You may also need to specify the fan_sensors option for these boards
fan_sensors=5

4
Documentation/hwmon/abituguru3.rst
View File

@ -13,7 +13,7 @@ Supported chips:
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
firmware and thus effectively many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
@ -24,7 +24,7 @@ Supported chips:
- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
AW9D-MAX)
The abituguru3 driver is only for revison 3.0.x.x motherboards,
The abituguru3 driver is only for revision 3.0.x.x motherboards,
this driver will not work on older motherboards. For older
motherboards use the abituguru (without the 3 !) driver.

26
Documentation/kbuild/llvm.rst
View File

@ -23,8 +23,8 @@ supports C and the GNU C extensions required by the kernel, and is pronounced
Clang
-----
The compiler used can be swapped out via `CC=` command line argument to `make`.
`CC=` should be set when selecting a config and during a build.
The compiler used can be swapped out via ``CC=`` command line argument to ``make``.
``CC=`` should be set when selecting a config and during a build. ::
make CC=clang defconfig
@ -34,33 +34,33 @@ Cross Compiling
---------------
A single Clang compiler binary will typically contain all supported backends,
which can help simplify cross compiling.
which can help simplify cross compiling. ::
ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead
`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For
example:
``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead
``CROSS_COMPILE`` is used to set a command line flag: ``--target <triple>``. For
example: ::
clang --target aarch64-linux-gnu foo.c
LLVM Utilities
--------------
LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1`
to enable them.
LLVM has substitutes for GNU binutils utilities. Kbuild supports ``LLVM=1``
to enable them. ::
make LLVM=1
They can be enabled individually. The full list of the parameters:
They can be enabled individually. The full list of the parameters: ::
make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \
OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \
READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \
HOSTLD=ld.lld
Currently, the integrated assembler is disabled by default. You can pass
`LLVM_IAS=1` to enable it.
``LLVM_IAS=1`` to enable it.
Getting Help
------------

18
Documentation/kbuild/makefiles.rst
View File

@ -16,7 +16,7 @@ This document describes the Linux kernel Makefiles.
--- 3.5 Library file goals - lib-y
--- 3.6 Descending down in directories
--- 3.7 Compilation flags
--- 3.8 Command line dependency
--- 3.8 <deleted>
--- 3.9 Dependency tracking
--- 3.10 Special Rules
--- 3.11 $(CC) support functions
@ -39,8 +39,8 @@ This document describes the Linux kernel Makefiles.
=== 7 Architecture Makefiles
--- 7.1 Set variables to tweak the build to the architecture
--- 7.2 Add prerequisites to archheaders:
--- 7.3 Add prerequisites to archprepare:
--- 7.2 Add prerequisites to archheaders
--- 7.3 Add prerequisites to archprepare
--- 7.4 List directories to visit when descending
--- 7.5 Architecture-specific boot images
--- 7.6 Building non-kbuild targets
@ -129,7 +129,7 @@ The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild'
file will be used.
Section 3.1 "Goal definitions" is a quick intro, further chapters provide
Section 3.1 "Goal definitions" is a quick intro; further chapters provide
more details, with real examples.
3.1 Goal definitions
@ -965,7 +965,7 @@ When kbuild executes, the following steps are followed (roughly):
KBUILD_LDFLAGS := -m elf_s390
Note: ldflags-y can be used to further customise
the flags used. See chapter 3.7.
the flags used. See section 3.7.
LDFLAGS_vmlinux
Options for $(LD) when linking vmlinux
@ -1121,7 +1121,7 @@ When kbuild executes, the following steps are followed (roughly):
In this example, the file target maketools will be processed
before descending down in the subdirectories.
See also chapter XXX-TODO that describe how kbuild supports
See also chapter XXX-TODO that describes how kbuild supports
generating offset header files.
@ -1261,7 +1261,7 @@ When kbuild executes, the following steps are followed (roughly):
always be built.
Assignments to $(targets) are without $(obj)/ prefix.
if_changed may be used in conjunction with custom commands as
defined in 6.8 "Custom kbuild commands".
defined in 7.8 "Custom kbuild commands".
Note: It is a typical mistake to forget the FORCE prerequisite.
Another common pitfall is that whitespace is sometimes
@ -1411,7 +1411,7 @@ When kbuild executes, the following steps are followed (roughly):
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
See "7.2 generic-y" for further info on syntax etc.
See "8.2 generic-y" for further info on syntax etc.
7.11 Post-link pass
-------------------
@ -1601,4 +1601,4 @@ is the right choice.
- Describe how kbuild supports shipped files with _shipped.
- Generating offset header files.
- Add more variables to section 7?
- Add more variables to chapters 7 or 9?

24
Documentation/locking/locktypes.rst
View File

@ -164,14 +164,14 @@ by disabling preemption or interrupts.
On non-PREEMPT_RT kernels local_lock operations map to the preemption and
interrupt disabling and enabling primitives:
=========================== ======================
local_lock(&llock) preempt_disable()
local_unlock(&llock) preempt_enable()
local_lock_irq(&llock) local_irq_disable()
local_unlock_irq(&llock) local_irq_enable()
local_lock_save(&llock) local_irq_save()
local_lock_restore(&llock) local_irq_save()
=========================== ======================
=============================== ======================
local_lock(&llock) preempt_disable()
local_unlock(&llock) preempt_enable()
local_lock_irq(&llock) local_irq_disable()
local_unlock_irq(&llock) local_irq_enable()
local_lock_irqsave(&llock) local_irq_save()
local_unlock_irqrestore(&llock) local_irq_restore()
=============================== ======================
The named scope of local_lock has two advantages over the regular
primitives:
@ -353,14 +353,14 @@ protection scope. So the following substitution is wrong::
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock_1, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_1, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags);
}
func2()
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock_2, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_2, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags);
}
func3()
@ -379,14 +379,14 @@ PREEMPT_RT-specific semantics of spinlock_t. The correct substitution is::
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
}
func2()
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
}
func3()

1
Documentation/maintainer/maintainer-entry-profile.rst
View File

@ -101,3 +101,4 @@ to do something different in the near future.
../doc-guide/maintainer-profile
../nvdimm/maintainer-entry-profile
../riscv/patch-acceptance

2
Documentation/networking/dsa/configuration.rst
View File

@ -180,7 +180,7 @@ The configuration can only be set up via VLAN tagging and bridge setup.
# bring up the slave interfaces
ip link set lan1 up
ip link set lan1 up
ip link set lan2 up
ip link set lan3 up
# create bridge

4
Documentation/powerpc/syscall64-abi.rst
View File

@ -49,16 +49,18 @@ Register preservation rules
Register preservation rules match the ELF ABI calling sequence with the
following differences:
=========== ============= ========================================
--- For the sc instruction, differences with the ELF ABI ---
=========== ============= ========================================
r0 Volatile (System call number.)
r3 Volatile (Parameter 1, and return value.)
r4-r8 Volatile (Parameters 2-6.)
cr0 Volatile (cr0.SO is the return error condition.)
cr1, cr5-7 Nonvolatile
lr Nonvolatile
=========== ============= ========================================
--- For the scv 0 instruction, differences with the ELF ABI ---
=========== ============= ========================================
r0 Volatile (System call number.)
r3 Volatile (Parameter 1, and return value.)
r4-r8 Volatile (Parameters 2-6.)

2
Documentation/process/deprecated.rst
View File

@ -142,7 +142,7 @@ only NUL-terminated strings. The safe replacement is strscpy().
(Users of strscpy() still needing NUL-padding should instead
use strscpy_pad().)
If a caller is using non-NUL-terminated strings, strncpy()() can
If a caller is using non-NUL-terminated strings, strncpy() can
still be used, but destinations should be marked with the `__nonstring
<https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
attribute to avoid future compiler warnings.

2
Documentation/sound/cards/audigy-mixer.rst
View File

@ -332,7 +332,7 @@ WO 9901953 (A1)
US Patents (https://www.uspto.gov/)
----------------------------------
-----------------------------------
US 5925841
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)

2
Documentation/sound/cards/sb-live-mixer.rst
View File

@ -337,7 +337,7 @@ WO 9901953 (A1)
US Patents (https://www.uspto.gov/)
----------------------------------
-----------------------------------
US 5925841
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)

2
Documentation/sound/designs/timestamping.rst
View File

@ -143,7 +143,7 @@ timestamp shows when the information is put together by the driver
before returning from the ``STATUS`` and ``STATUS_EXT`` ioctl. in most cases
this driver_timestamp will be identical to the regular system tstamp.
Examples of typestamping with HDaudio:
Examples of timestamping with HDAudio:
1. DMA timestamp, no compensation for DMA+analog delay
::

2
Documentation/translations/it_IT/process/deprecated.rst
View File

@ -130,7 +130,7 @@ chi usa solo stringe terminate. La versione sicura da usare è
strscpy(). (chi usa strscpy() e necessita di estendere la
terminazione con NUL deve aggiungere una chiamata a memset())
Se il chiamate no usa stringhe terminate con NUL, allore strncpy()()
Se il chiamate no usa stringhe terminate con NUL, allore strncpy()
può continuare ad essere usata, ma i buffer di destinazione devono essere
marchiati con l'attributo `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
per evitare avvisi durante la compilazione.

40
MAINTAINERS
View File

@ -3205,6 +3205,7 @@ S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
F: block/
F: drivers/block/
F: include/linux/blk*
F: kernel/trace/blktrace.c
F: lib/sbitmap.c
@ -3388,6 +3389,7 @@ M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
L: openwrt-devel@lists.openwrt.org (subscribers-only)
S: Supported
F: Documentation/devicetree/bindings/net/dsa/b53.txt
F: drivers/net/dsa/b53/*
F: include/linux/platform_data/b53.h
@ -3573,13 +3575,28 @@ L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/phy/broadcom/phy-brcm-usb*
BROADCOM ETHERNET PHY DRIVERS
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
F: drivers/net/phy/bcm*.[ch]
F: drivers/net/phy/broadcom.c
F: include/linux/brcmphy.h
BROADCOM GENET ETHERNET DRIVER
M: Doug Berger <opendmb@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
F: Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
F: drivers/net/ethernet/broadcom/genet/
F: drivers/net/mdio/mdio-bcm-unimac.c
F: include/linux/platform_data/bcmgenet.h
F: include/linux/platform_data/mdio-bcm-unimac.h
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
@ -5248,6 +5265,7 @@ DOCUMENTATION
M: Jonathan Corbet <corbet@lwn.net>
L: linux-doc@vger.kernel.org
S: Maintained
P: Documentation/doc-guide/maintainer-profile.rst
T: git git://git.lwn.net/linux.git docs-next
F: Documentation/
F: scripts/documentation-file-ref-check
@ -6503,7 +6521,6 @@ F: net/bridge/
ETHERNET PHY LIBRARY
M: Andrew Lunn <andrew@lunn.ch>
M: Florian Fainelli <f.fainelli@gmail.com>
M: Heiner Kallweit <hkallweit1@gmail.com>
R: Russell King <linux@armlinux.org.uk>
L: netdev@vger.kernel.org
@ -13588,12 +13605,18 @@ F: kernel/events/*
F: tools/lib/perf/
F: tools/perf/
PERFORMANCE EVENTS SUBSYSTEM ARM64 PMU EVENTS
PERFORMANCE EVENTS TOOLING ARM64
R: John Garry <john.garry@huawei.com>
R: Will Deacon <will@kernel.org>
R: Mathieu Poirier <mathieu.poirier@linaro.org>
R: Leo Yan <leo.yan@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: tools/build/feature/test-libopencsd.c
F: tools/perf/arch/arm*/
F: tools/perf/pmu-events/arch/arm64/
F: tools/perf/util/arm-spe*
F: tools/perf/util/cs-etm*
PERSONALITY HANDLING
M: Christoph Hellwig <hch@infradead.org>
@ -17136,8 +17159,8 @@ S: Maintained
F: Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
F: drivers/clk/keystone/sci-clk.c
@ -18894,6 +18917,15 @@ S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
F: arch/x86/platform
X86 PLATFORM UV HPE SUPERDOME FLEX
M: Steve Wahl <steve.wahl@hpe.com>
R: Dimitri Sivanich <dimitri.sivanich@hpe.com>
R: Russ Anderson <russ.anderson@hpe.com>
S: Supported
F: arch/x86/include/asm/uv/
F: arch/x86/kernel/apic/x2apic_uv_x.c
F: arch/x86/platform/uv/
X86 VDSO
M: Andy Lutomirski <luto@kernel.org>
L: linux-kernel@vger.kernel.org

2
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc3
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*

2
arch/alpha/kernel/module.c
View File

@ -212,7 +212,7 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
STO_ALPHA_STD_GPLOAD)
/* Omit the prologue. */
value += 8;
/* FALLTHRU */
fallthrough;
case R_ALPHA_BRADDR:
value -= (u64)location + 4;
if (value & 3)

2
arch/alpha/kernel/signal.c
View File

@ -453,7 +453,7 @@ syscall_restart(unsigned long r0, unsigned long r19,
regs->r0 = EINTR;
break;
}
/* fallthrough */
fallthrough;
case ERESTARTNOINTR:
regs->r0 = r0; /* reset v0 and a3 and replay syscall */
regs->r19 = r19;

4
arch/alpha/kernel/traps.c
View File

@ -883,7 +883,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
case 0x26: /* sts */
fake_reg = s_reg_to_mem(alpha_read_fp_reg(reg));
/* FALLTHRU */
fallthrough;
case 0x2c: /* stl */
__asm__ __volatile__(
@ -911,7 +911,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
case 0x27: /* stt */
fake_reg = alpha_read_fp_reg(reg);
/* FALLTHRU */
fallthrough;
case 0x2d: /* stq */
__asm__ __volatile__(

2
arch/arc/kernel/disasm.c
View File

@ -339,7 +339,7 @@ void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
case op_LDWX_S: /* LDWX_S c, [b, u6] */
state->x = 1;
/* intentional fall-through */
fallthrough;
case op_LDW_S: /* LDW_S c, [b, u6] */
state->zz = 2;

2
arch/arc/kernel/signal.c
View File

@ -321,7 +321,7 @@ static void arc_restart_syscall(struct k_sigaction *ka, struct pt_regs *regs)
regs->r0 = -EINTR;
break;
}
/* fallthrough */
fallthrough;
case -ERESTARTNOINTR:
/*

6
arch/arc/kernel/unwind.c
View File

@ -572,7 +572,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
#else
BUILD_BUG_ON(sizeof(u32) != sizeof(value));
#endif
/* Fall through */
fallthrough;
case DW_EH_PE_native:
if (end < (const void *)(ptr.pul + 1))
return 0;
@ -827,7 +827,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
case DW_CFA_def_cfa:
state->cfa.reg = get_uleb128(&ptr.p8, end);
unw_debug("cfa_def_cfa: r%lu ", state->cfa.reg);
/* fall through */
fallthrough;
case DW_CFA_def_cfa_offset:
state->cfa.offs = get_uleb128(&ptr.p8, end);
unw_debug("cfa_def_cfa_offset: 0x%lx ",
@ -835,7 +835,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
break;
case DW_CFA_def_cfa_sf:
state->cfa.reg = get_uleb128(&ptr.p8, end);
/* fall through */
fallthrough;
case DW_CFA_def_cfa_offset_sf:
state->cfa.offs = get_sleb128(&ptr.p8, end)
* state->dataAlign;

10
arch/arm/kernel/hw_breakpoint.c
View File

@ -547,7 +547,7 @@ static int arch_build_bp_info(struct perf_event *bp,
if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
&& max_watchpoint_len >= 8)
break;
/* Else, fall through */
fallthrough;
default:
return -EINVAL;
}
@ -612,12 +612,12 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,
/* Allow halfword watchpoints and breakpoints. */
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
/* Else, fall through */
fallthrough;
case 3:
/* Allow single byte watchpoint. */
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
break;
/* Else, fall through */
fallthrough;
default:
ret = -EINVAL;
goto out;
@ -884,7 +884,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
break;
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
/* Fall through */
fallthrough;
case ARM_ENTRY_SYNC_WATCHPOINT:
watchpoint_handler(addr, fsr, regs);
break;
@ -933,7 +933,7 @@ static bool core_has_os_save_restore(void)
ARM_DBG_READ(c1, c1, 4, oslsr);
if (oslsr & ARM_OSLSR_OSLM0)
return true;
/* Else, fall through */
fallthrough;
default:
return false;
}

2
arch/arm/kernel/signal.c
View File

@ -596,7 +596,7 @@ static int do_signal(struct pt_regs *regs, int syscall)
switch (retval) {
case -ERESTART_RESTARTBLOCK:
restart -= 2;
/* Fall through */
fallthrough;
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:

2
arch/arm/mach-ep93xx/crunch.c
View File

@ -49,7 +49,7 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
* FALLTHROUGH: Ensure we don't try to overwrite our newly
* initialised state information on the first fault.
*/
/* Fall through */
fallthrough;
case THREAD_NOTIFY_EXIT:
crunch_task_release(thread);

8
arch/arm/mach-mmp/pm-mmp2.c
View File

@ -123,19 +123,19 @@ void mmp2_pm_enter_lowpower_mode(int state)
case POWER_MODE_SYS_SLEEP:
apcr |= MPMU_PCR_PJ_SLPEN; /* set the SLPEN bit */
apcr |= MPMU_PCR_PJ_VCTCXOSD; /* set VCTCXOSD */
/* fall through */
fallthrough;
case POWER_MODE_CHIP_SLEEP:
apcr |= MPMU_PCR_PJ_SLPEN;
/* fall through */
fallthrough;
case POWER_MODE_APPS_SLEEP:
apcr |= MPMU_PCR_PJ_APBSD; /* set APBSD */
/* fall through */
fallthrough;
case POWER_MODE_APPS_IDLE:
apcr |= MPMU_PCR_PJ_AXISD; /* set AXISDD bit */
apcr |= MPMU_PCR_PJ_DDRCORSD; /* set DDRCORSD bit */
idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN; /* PJ power down */
apcr |= MPMU_PCR_PJ_SPSD;
/* fall through */
fallthrough;
case POWER_MODE_CORE_EXTIDLE:
idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE; /* set the IDLE bit */
idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK;

10
arch/arm/mach-mmp/pm-pxa910.c
View File

@ -145,23 +145,23 @@ void pxa910_pm_enter_lowpower_mode(int state)
case POWER_MODE_UDR:
/* only shutdown APB in UDR */
apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
/* fall through */
fallthrough;
case POWER_MODE_SYS_SLEEP:
apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */
apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */
/* fall through */
fallthrough;
case POWER_MODE_APPS_SLEEP:
apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */
/* fall through */
fallthrough;
case POWER_MODE_APPS_IDLE:
apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */
/* fall through */
fallthrough;
case POWER_MODE_CORE_EXTIDLE:
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
/* fall through */
fallthrough;
case POWER_MODE_CORE_INTIDLE:
break;
}

8
arch/arm/mach-omap2/id.c
View File

@ -396,7 +396,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "3.1";
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1_2;
@ -416,7 +415,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.0";
break;
case 1:
/* FALLTHROUGH */
default:
omap_revision = AM35XX_REV_ES1_1;
cpu_rev = "1.1";
@ -435,7 +433,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.1";
break;
case 2:
/* FALLTHROUGH */
default:
omap_revision = OMAP3630_REV_ES1_2;
cpu_rev = "1.2";
@ -456,7 +453,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "2.0";
break;
case 3:
/* FALLTHROUGH */
default:
omap_revision = TI8168_REV_ES2_1;
cpu_rev = "2.1";
@ -473,7 +469,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "2.0";
break;
case 2:
/* FALLTHROUGH */
default:
omap_revision = AM335X_REV_ES2_1;
cpu_rev = "2.1";
@ -491,7 +486,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.1";
break;
case 2:
/* FALLTHROUGH */
default:
omap_revision = AM437X_REV_ES1_2;
cpu_rev = "1.2";
@ -502,7 +496,6 @@ void __init omap3xxx_check_revision(void)
case 0xb968:
switch (rev) {
case 0:
/* FALLTHROUGH */
case 1:
omap_revision = TI8148_REV_ES1_0;
cpu_rev = "1.0";
@ -512,7 +505,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "2.0";
break;
case 3:
/* FALLTHROUGH */
default:
omap_revision = TI8148_REV_ES2_1;
cpu_rev = "2.1";

2
arch/arm/mach-omap2/omap_device.c
View File

@ -240,7 +240,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
omap_auxdata_legacy_init(dev);
/* fall through */
fallthrough;
default:
od = to_omap_device(pdev);
if (od)

4
arch/arm/mach-omap2/pm34xx.c
View File

@ -298,11 +298,7 @@ static void omap3_pm_idle(void)
if (omap_irq_pending())
return;
trace_cpu_idle_rcuidle(1, smp_processor_id());
omap_sram_idle();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_SUSPEND

2
arch/arm/mach-orion5x/dns323-setup.c
View File

@ -624,7 +624,7 @@ static void __init dns323_init(void)
dns323ab_leds[0].active_low = 1;
gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
/* Fall through */
fallthrough;
case DNS323_REV_B1:
i2c_register_board_info(0, dns323ab_i2c_devices,
ARRAY_SIZE(dns323ab_i2c_devices));

2
arch/arm/mach-rpc/riscpc.c
View File

@ -46,7 +46,7 @@ static int __init parse_tag_acorn(const struct tag *tag)
switch (tag->u.acorn.vram_pages) {
case 512:
vram_size += PAGE_SIZE * 256;
/* Fall through - ??? */
fallthrough; /* ??? */
case 256:
vram_size += PAGE_SIZE * 256;
default:

2
arch/arm/mach-tegra/reset.c
View File

@ -70,7 +70,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
switch (err) {
case -ENOSYS:
tegra_cpu_reset_handler_set(reset_address);
/* fall through */
fallthrough;
case 0:
is_enabled = true;
break;

4
arch/arm/mm/alignment.c
View File

@ -694,7 +694,7 @@ thumb2arm(u16 tinstr)
return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] |
(tinstr & 255); /* register_list */
}
/* Else, fall through - for illegal instruction case */
fallthrough; /* for illegal instruction case */
default:
return BAD_INSTR;
@ -750,7 +750,7 @@ do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs,
case 0xe8e0:
case 0xe9e0:
poffset->un = (tinst2 & 0xff) << 2;
/* Fall through */
fallthrough;
case 0xe940:
case 0xe9c0:

2
arch/arm/mm/proc-v7-bugs.c
View File

@ -71,7 +71,7 @@ static void cpu_v7_spectre_init(void)
/* Other ARM CPUs require no workaround */
if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
break;
/* fallthrough */
fallthrough;
/* Cortex A57/A72 require firmware workaround */
case ARM_CPU_PART_CORTEX_A57:
case ARM_CPU_PART_CORTEX_A72: {

6
arch/arm/plat-omap/dma.c
View File

@ -309,14 +309,14 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
*/
/* fall through */
fallthrough;
case OMAP_DMA_DATA_BURST_16:
if (dma_omap2plus()) {
burst = 0x3;
break;
}
/* OMAP1 don't support burst 16 */
/* fall through */
fallthrough;
default:
BUG();
}
@ -393,7 +393,7 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
break;
}
/* OMAP1 don't support burst 16 */
/* fall through */
fallthrough;
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();

2
arch/arm/probes/decode.c
View File

@ -307,7 +307,7 @@ static bool __kprobes decode_regs(probes_opcode_t *pinsn, u32 regs, bool modify)
case REG_TYPE_NOPCWB:
if (!is_writeback(insn))
break; /* No writeback, so any register is OK */
/* fall through... */
fallthrough;
case REG_TYPE_NOPC:
case REG_TYPE_NOPCX:
/* Reject PC (R15) */

2
arch/arm/probes/kprobes/core.c
View File

@ -280,7 +280,7 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
/* A nested probe was hit in FIQ, it is a BUG */
pr_warn("Unrecoverable kprobe detected.\n");
dump_kprobe(p);
/* fall through */
fallthrough;
default:
/* impossible cases */
BUG();

14
arch/arm64/Makefile
View File

@ -82,8 +82,8 @@ endif
# compiler to generate them and consequently to break the single image contract
# we pass it only to the assembler. This option is utilized only in case of non
# integrated assemblers.
ifneq ($(CONFIG_AS_HAS_ARMV8_4), y)
branch-prot-flags-$(CONFIG_AS_HAS_PAC) += -Wa,-march=armv8.3-a
ifeq ($(CONFIG_AS_HAS_PAC), y)
asm-arch := armv8.3-a
endif
endif
@ -91,7 +91,12 @@ KBUILD_CFLAGS += $(branch-prot-flags-y)
ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
# make sure to pass the newest target architecture to -march.
KBUILD_CFLAGS += -Wa,-march=armv8.4-a
asm-arch := armv8.4-a
endif
ifdef asm-arch
KBUILD_CFLAGS += -Wa,-march=$(asm-arch) \
-DARM64_ASM_ARCH='"$(asm-arch)"'
endif
ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
@ -165,7 +170,8 @@ zinstall install:
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@
$(if $(CONFIG_COMPAT_VDSO), \
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:

2
arch/arm64/boot/dts/mediatek/mt7622.dtsi
View File

@ -686,6 +686,8 @@
clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
<&topckgen CLK_TOP_MSDC50_0_SEL>;
clock-names = "source", "hclk";
resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
reset-names = "hrst";
status = "disabled";
};

20
arch/arm64/boot/dts/nvidia/tegra186.dtsi
View File

@ -337,8 +337,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03400000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
@ -366,8 +367,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03420000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC2>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
@ -390,8 +392,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03440000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
@ -416,8 +419,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03460000 0x0 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
<&bpmp TEGRA186_CLK_PLLC4_VCO>;
assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;

15
arch/arm64/boot/dts/nvidia/tegra194.dtsi
View File

@ -460,8 +460,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03400000 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
@ -485,8 +486,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03440000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
@ -511,8 +513,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03460000 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
<&bpmp TEGRA194_CLK_PLLC4>;
assigned-clock-parents =

20
arch/arm64/boot/dts/nvidia/tegra210.dtsi
View File

@ -1194,8 +1194,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 14>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@ -1222,8 +1223,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0200 0x0 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 9>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-1v8-drv";
@ -1239,8 +1241,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0400 0x0 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 69>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@ -1262,8 +1265,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0600 0x0 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 15>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv";

36
arch/arm64/boot/dts/ti/k3-am65-main.dtsi
View File

@ -417,10 +417,10 @@
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x1>;
ti,sci-dev-id = <100>;
ti,interrupt-ranges = <0 392 32>;
};
main_navss {
@ -438,10 +438,11 @@
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x0>, <0x2>;
ti,sci-dev-id = <182>;
ti,interrupt-ranges = <0 64 64>,
<64 448 64>;
};
inta_main_udmass: interrupt-controller@33d00000 {
@ -452,8 +453,7 @@
msi-controller;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,sci-rm-range-vint = <0x0>;
ti,sci-rm-range-global-event = <0x1>;
ti,interrupt-ranges = <0 0 256>;
};
secure_proxy_main: mailbox@32c00000 {
@ -589,7 +589,7 @@
<0x0 0x33000000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <818>;
ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,dma-ring-reset-quirk;
ti,sci = <&dmsc>;
ti,sci-dev-id = <187>;
@ -609,11 +609,11 @@
ti,sci-dev-id = <188>;
ti,ringacc = <&ringacc>;
ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
<0x2>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
<0x5>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
<0xd>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
<0xa>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
};
cpts@310d0000 {
@ -622,7 +622,7 @@
reg-names = "cpts";
clocks = <&main_cpts_mux>;
clock-names = "cpts";
interrupts-extended = <&intr_main_navss 163 0>;
interrupts-extended = <&intr_main_navss 391>;
interrupt-names = "cpts";
ti,cpts-periodic-outputs = <6>;
ti,cpts-ext-ts-inputs = <8>;
@ -645,8 +645,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&intr_main_gpio>;
interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>,
<57 261>;
interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <96>;
@ -661,8 +660,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&intr_main_gpio>;
interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>,
<58 261>;
interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <90>;

12
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
View File

@ -134,7 +134,7 @@
<0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,dma-ring-reset-quirk;
ti,sci = <&dmsc>;
ti,sci-dev-id = <195>;
@ -154,11 +154,11 @@
ti,sci-dev-id = <194>;
ti,ringacc = <&mcu_ringacc>;
ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
<0x2>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
<0x4>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
<0xd>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
<0xa>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
};
};

8
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
View File

@ -74,10 +74,10 @@
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x4>;
ti,sci-dev-id = <156>;
ti,interrupt-ranges = <0 712 16>;
};
wkup_gpio0: wkup_gpio0@42110000 {
@ -86,7 +86,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&intr_wkup_gpio>;
interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
interrupts = <60>, <61>, <62>, <63>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <56>;

4
arch/arm64/boot/dts/ti/k3-am654-base-board.dts
View File

@ -384,7 +384,7 @@
};
&mailbox0_cluster0 {
interrupts = <164 0>;
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
ti,mbox-tx = <1 0 0>;
@ -393,7 +393,7 @@
};
&mailbox0_cluster1 {
interrupts = <165 0>;
interrupts = <432>;
mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
ti,mbox-tx = <1 0 0>;

10
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
View File

@ -287,7 +287,7 @@
};
&mailbox0_cluster0 {
interrupts = <214 0>;
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
@ -301,7 +301,7 @@
};
&mailbox0_cluster1 {
interrupts = <215 0>;
interrupts = <432>;
mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
@ -315,7 +315,7 @@
};
&mailbox0_cluster2 {
interrupts = <216 0>;
interrupts = <428>;
mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
ti,mbox-rx = <0 0 0>;
@ -329,7 +329,7 @@
};
&mailbox0_cluster3 {
interrupts = <217 0>;
interrupts = <424>;
mbox_c66_0: mbox-c66-0 {
ti,mbox-rx = <0 0 0>;
@ -343,7 +343,7 @@
};
&mailbox0_cluster4 {
interrupts = <218 0>;
interrupts = <420>;
mbox_c71_0: mbox-c71-0 {
ti,mbox-rx = <0 0 0>;

43
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
View File

@ -80,10 +80,10 @@
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <14>;
ti,sci-rm-range-girq = <0x1>;
ti,sci-dev-id = <131>;
ti,interrupt-ranges = <8 392 56>;
};
main_navss {
@ -101,10 +101,12 @@
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <14>;
ti,sci-rm-range-girq = <0>, <2>;
ti,sci-dev-id = <213>;
ti,interrupt-ranges = <0 64 64>,
<64 448 64>,
<128 672 64>;
};
main_udmass_inta: interrupt-controller@33d00000 {
@ -115,8 +117,7 @@
msi-controller;
ti,sci = <&dmsc>;
ti,sci-dev-id = <209>;
ti,sci-rm-range-vint = <0xa>;
ti,sci-rm-range-global-event = <0xd>;
ti,interrupt-ranges = <0 0 256>;
};
secure_proxy_main: mailbox@32c00000 {
@ -296,7 +297,7 @@
reg-names = "cpts";
clocks = <&k3_clks 201 1>;
clock-names = "cpts";
interrupts-extended = <&main_navss_intr 201 0>;
interrupts-extended = <&main_navss_intr 391>;
interrupt-names = "cpts";
ti,cpts-periodic-outputs = <6>;
ti,cpts-ext-ts-inputs = <8>;
@ -688,8 +689,8 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <105 0>, <105 1>, <105 2>, <105 3>,
<105 4>, <105 5>, <105 6>, <105 7>;
interrupts = <256>, <257>, <258>, <259>,
<260>, <261>, <262>, <263>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@ -705,7 +706,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <106 0>, <106 1>, <106 2>;
interrupts = <288>, <289>, <290>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
@ -721,8 +722,8 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <107 0>, <107 1>, <107 2>, <107 3>,
<107 4>, <107 5>, <107 6>, <107 7>;
interrupts = <264>, <265>, <266>, <267>,
<268>, <269>, <270>, <271>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@ -738,7 +739,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <108 0>, <108 1>, <108 2>;
interrupts = <292>, <293>, <294>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
@ -754,8 +755,8 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <109 0>, <109 1>, <109 2>, <109 3>,
<109 4>, <109 5>, <109 6>, <109 7>;
interrupts = <272>, <273>, <274>, <275>,
<276>, <277>, <278>, <279>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@ -771,7 +772,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <110 0>, <110 1>, <110 2>;
interrupts = <296>, <297>, <298>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;
@ -787,8 +788,8 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <111 0>, <111 1>, <111 2>, <111 3>,
<111 4>, <111 5>, <111 6>, <111 7>;
interrupts = <280>, <281>, <282>, <283>,
<284>, <285>, <286>, <287>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <128>;
@ -804,7 +805,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <112 0>, <112 1>, <112 2>;
interrupts = <300>, <301>, <302>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <36>;

12
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
View File

@ -101,10 +101,10 @@
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <14>;
ti,sci-rm-range-girq = <0x5>;
ti,sci-dev-id = <137>;
ti,interrupt-ranges = <16 960 16>;
};
wkup_gpio0: gpio@42110000 {
@ -113,8 +113,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&wkup_gpio_intr>;
interrupts = <113 0>, <113 1>, <113 2>,
<113 3>, <113 4>, <113 5>;
interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <84>;
@ -130,8 +129,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&wkup_gpio_intr>;
interrupts = <114 0>, <114 1>, <114 2>,
<114 3>, <114 4>, <114 5>;
interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <84>;

6
arch/arm64/include/asm/compiler.h
View File

@ -2,6 +2,12 @@
#ifndef __ASM_COMPILER_H
#define __ASM_COMPILER_H
#ifdef ARM64_ASM_ARCH
#define ARM64_ASM_PREAMBLE ".arch " ARM64_ASM_ARCH "\n"
#else
#define ARM64_ASM_PREAMBLE
#endif
/*
* The EL0/EL1 pointer bits used by a pointer authentication code.
* This is dependent on TBI0/TBI1 being enabled, or bits 63:56 would also apply.

5
arch/arm64/include/asm/irqflags.h
View File

@ -95,6 +95,11 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
return res;
}
static inline int arch_irqs_disabled(void)
{
return arch_irqs_disabled_flags(arch_local_save_flags());
}
static inline unsigned long arch_local_irq_save(void)
{
unsigned long flags;

3
arch/arm64/include/asm/kvm_arm.h
View File

@ -71,11 +71,12 @@
* IMO: Override CPSR.I and enable signaling with VI
* FMO: Override CPSR.F and enable signaling with VF
* SWIO: Turn set/way invalidates into set/way clean+invalidate
* PTW: Take a stage2 fault if a stage1 walk steps in device memory
*/
#define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
HCR_BSU_IS | HCR_FB | HCR_TAC | \
HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
HCR_FMO | HCR_IMO)
HCR_FMO | HCR_IMO | HCR_PTW )
#define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
#define HCR_HOST_NVHE_FLAGS (HCR_RW | HCR_API | HCR_APK)
#define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)

43
arch/arm64/include/asm/kvm_asm.h
View File

@ -169,6 +169,34 @@ extern char __smccc_workaround_1_smc[__SMCCC_WORKAROUND_1_SMC_SZ];
*__hyp_this_cpu_ptr(sym); \
})
#define __KVM_EXTABLE(from, to) \
" .pushsection __kvm_ex_table, \"a\"\n" \
" .align 3\n" \
" .long (" #from " - .), (" #to " - .)\n" \
" .popsection\n"
#define __kvm_at(at_op, addr) \
( { \
int __kvm_at_err = 0; \
u64 spsr, elr; \
asm volatile( \
" mrs %1, spsr_el2\n" \
" mrs %2, elr_el2\n" \
"1: at "at_op", %3\n" \
" isb\n" \
" b 9f\n" \
"2: msr spsr_el2, %1\n" \
" msr elr_el2, %2\n" \
" mov %w0, %4\n" \
"9:\n" \
__KVM_EXTABLE(1b, 2b) \
: "+r" (__kvm_at_err), "=&r" (spsr), "=&r" (elr) \
: "r" (addr), "i" (-EFAULT)); \
__kvm_at_err; \
} )
#else /* __ASSEMBLY__ */
.macro hyp_adr_this_cpu reg, sym, tmp
@ -193,6 +221,21 @@ extern char __smccc_workaround_1_smc[__SMCCC_WORKAROUND_1_SMC_SZ];
ldr \vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
.endm
/*
* KVM extable for unexpected exceptions.
* In the same format _asm_extable, but output to a different section so that
* it can be mapped to EL2. The KVM version is not sorted. The caller must
* ensure:
* x18 has the hypervisor value to allow any Shadow-Call-Stack instrumented
* code to write to it, and that SPSR_EL2 and ELR_EL2 are restored by the fixup.
*/
.macro _kvm_extable, from, to
.pushsection __kvm_ex_table, "a"
.align 3
.long (\from - .), (\to - .)
.popsection
.endm
#endif
#endif /* __ARM_KVM_ASM_H__ */

6
arch/arm64/include/asm/tlbflush.h
View File

@ -28,14 +28,16 @@
* not. The macros handles invoking the asm with or without the
* register argument as appropriate.
*/
#define __TLBI_0(op, arg) asm ("tlbi " #op "\n" \
#define __TLBI_0(op, arg) asm (ARM64_ASM_PREAMBLE \
"tlbi " #op "\n" \
ALTERNATIVE("nop\n nop", \
"dsb ish\n tlbi " #op, \
ARM64_WORKAROUND_REPEAT_TLBI, \
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI) \
: : )
#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0\n" \
#define __TLBI_1(op, arg) asm (ARM64_ASM_PREAMBLE \
"tlbi " #op ", %0\n" \
ALTERNATIVE("nop\n nop", \
"dsb ish\n tlbi " #op ", %0", \
ARM64_WORKAROUND_REPEAT_TLBI, \

2
arch/arm64/kernel/acpi.c
View File

@ -322,7 +322,7 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
*/
if (memblock_is_map_memory(phys))
return (void __iomem *)__phys_to_virt(phys);
/* fall through */
fallthrough;
default:
if (region->attribute & EFI_MEMORY_WB)

2
arch/arm64/kernel/cpufeature.c
View File

@ -686,7 +686,7 @@ static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new,
case FTR_HIGHER_OR_ZERO_SAFE:
if (!cur || !new)
break;
/* Fallthrough */
fallthrough;
case FTR_HIGHER_SAFE:
ret = new > cur ? new : cur;
break;

1
arch/arm64/kernel/cpuinfo.c
View File

@ -327,7 +327,6 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
set_bit(ICACHEF_VPIPT, &__icache_flags);
break;
default:
/* Fallthrough */
case ICACHE_POLICY_VIPT:
/* Assume aliasing */
set_bit(ICACHEF_ALIASING, &__icache_flags);

6
arch/arm64/kernel/hw_breakpoint.c
View File

@ -257,7 +257,7 @@ static int hw_breakpoint_control(struct perf_event *bp,
* level.
*/
enable_debug_monitors(dbg_el);
/* Fall through */
fallthrough;
case HW_BREAKPOINT_RESTORE:
/* Setup the address register. */
write_wb_reg(val_reg, i, info->address);
@ -541,13 +541,13 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
/* Fallthrough */
fallthrough;
case 3:
/* Allow single byte watchpoint. */
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
break;
/* Fallthrough */
fallthrough;
default:
return -EINVAL;
}

4
arch/arm64/kernel/image-vars.h
View File

@ -103,6 +103,10 @@ KVM_NVHE_ALIAS(vgic_v3_cpuif_trap);
KVM_NVHE_ALIAS(gic_pmr_sync);
#endif
/* EL2 exception handling */
KVM_NVHE_ALIAS(__start___kvm_ex_table);
KVM_NVHE_ALIAS(__stop___kvm_ex_table);
#endif /* CONFIG_KVM */
#endif /* __ARM64_KERNEL_IMAGE_VARS_H */

3
arch/arm64/kernel/module-plts.c
View File

@ -305,8 +305,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
mod->arch.core.plt_shndx = i;
else if (!strcmp(secstrings + sechdrs[i].sh_name, ".init.plt"))
mod->arch.init.plt_shndx = i;
else if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) &&
!strcmp(secstrings + sechdrs[i].sh_name,
else if (!strcmp(secstrings + sechdrs[i].sh_name,
".text.ftrace_trampoline"))
tramp = sechdrs + i;
else if (sechdrs[i].sh_type == SHT_SYMTAB)

8
arch/arm64/kernel/module.c
View File

@ -315,21 +315,21 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
/* MOVW instruction relocations. */
case R_AARCH64_MOVW_UABS_G0_NC:
overflow_check = false;
/* Fall through */
fallthrough;
case R_AARCH64_MOVW_UABS_G0:
ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
AARCH64_INSN_IMM_MOVKZ);
break;
case R_AARCH64_MOVW_UABS_G1_NC:
overflow_check = false;
/* Fall through */
fallthrough;
case R_AARCH64_MOVW_UABS_G1:
ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
AARCH64_INSN_IMM_MOVKZ);
break;
case R_AARCH64_MOVW_UABS_G2_NC:
overflow_check = false;
/* Fall through */
fallthrough;
case R_AARCH64_MOVW_UABS_G2:
ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
AARCH64_INSN_IMM_MOVKZ);
@ -397,7 +397,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_AARCH64_ADR_PREL_PG_HI21_NC:
overflow_check = false;
/* Fall through */
fallthrough;
case R_AARCH64_ADR_PREL_PG_HI21:
ovf = reloc_insn_adrp(me, sechdrs, loc, val);
if (ovf && ovf != -ERANGE)

2
arch/arm64/kernel/process.c
View File

@ -123,10 +123,8 @@ void arch_cpu_idle(void)
* This should do all the clock switching and wait for interrupt
* tricks
*/
trace_cpu_idle_rcuidle(1, smp_processor_id());
cpu_do_idle();
local_irq_enable();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_HOTPLUG_CPU

1
arch/arm64/kernel/setup.c
View File

@ -280,7 +280,6 @@ u64 cpu_logical_map(int cpu)
{
return __cpu_logical_map[cpu];
}
EXPORT_SYMBOL_GPL(cpu_logical_map);
void __init __no_sanitize_address setup_arch(char **cmdline_p)
{

2
arch/arm64/kernel/smp.c
View File

@ -151,7 +151,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
break;
}
pr_crit("CPU%u: may not have shut down cleanly\n", cpu);
/* Fall through */
fallthrough;
case CPU_STUCK_IN_KERNEL:
pr_crit("CPU%u: is stuck in kernel\n", cpu);
if (status & CPU_STUCK_REASON_52_BIT_VA)

8
arch/arm64/kernel/vmlinux.lds.S
View File

@ -20,6 +20,13 @@ ENTRY(_text)
jiffies = jiffies_64;
#define HYPERVISOR_EXTABLE \
. = ALIGN(SZ_8); \
__start___kvm_ex_table = .; \
*(__kvm_ex_table) \
__stop___kvm_ex_table = .;
#define HYPERVISOR_TEXT \
/* \
* Align to 4 KB so that \
@ -35,6 +42,7 @@ jiffies = jiffies_64;
__hyp_idmap_text_end = .; \
__hyp_text_start = .; \
*(.hyp.text) \
HYPERVISOR_EXTABLE \
__hyp_text_end = .;
#define IDMAP_TEXT \

2
arch/arm64/kvm/handle_exit.c
View File

@ -128,7 +128,7 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu)
switch (ESR_ELx_EC(esr)) {
case ESR_ELx_EC_WATCHPT_LOW:
run->debug.arch.far = vcpu->arch.fault.far_el2;
/* fall through */
fallthrough;
case ESR_ELx_EC_SOFTSTP_LOW:
case ESR_ELx_EC_BREAKPT_LOW:
case ESR_ELx_EC_BKPT32:

15
arch/arm64/kvm/hyp/entry.S
View File

@ -196,20 +196,23 @@ alternative_endif
// This is our single instruction exception window. A pending
// SError is guaranteed to occur at the earliest when we unmask
// it, and at the latest just after the ISB.
.global abort_guest_exit_start
abort_guest_exit_start:
isb
.global abort_guest_exit_end
abort_guest_exit_end:
msr daifset, #4 // Mask aborts
ret
// If the exception took place, restore the EL1 exception
// context so that we can report some information.
// Merge the exception code with the SError pending bit.
tbz x0, #ARM_EXIT_WITH_SERROR_BIT, 1f
_kvm_extable abort_guest_exit_start, 9997f
_kvm_extable abort_guest_exit_end, 9997f
9997:
msr daifset, #4 // Mask aborts
mov x0, #(1 << ARM_EXIT_WITH_SERROR_BIT)
// restore the EL1 exception context so that we can report some
// information. Merge the exception code with the SError pending bit.
msr elr_el2, x2
msr esr_el2, x3
msr spsr_el2, x4

65
arch/arm64/kvm/hyp/hyp-entry.S
View File

@ -15,6 +15,30 @@
#include <asm/kvm_mmu.h>
#include <asm/mmu.h>
.macro save_caller_saved_regs_vect
/* x0 and x1 were saved in the vector entry */
stp x2, x3, [sp, #-16]!
stp x4, x5, [sp, #-16]!
stp x6, x7, [sp, #-16]!
stp x8, x9, [sp, #-16]!
stp x10, x11, [sp, #-16]!
stp x12, x13, [sp, #-16]!
stp x14, x15, [sp, #-16]!
stp x16, x17, [sp, #-16]!
.endm
.macro restore_caller_saved_regs_vect
ldp x16, x17, [sp], #16
ldp x14, x15, [sp], #16
ldp x12, x13, [sp], #16
ldp x10, x11, [sp], #16
ldp x8, x9, [sp], #16
ldp x6, x7, [sp], #16
ldp x4, x5, [sp], #16
ldp x2, x3, [sp], #16
ldp x0, x1, [sp], #16
.endm
.text
.macro do_el2_call
@ -143,13 +167,19 @@ el1_error:
b __guest_exit
el2_sync:
/* Check for illegal exception return, otherwise panic */
/* Check for illegal exception return */
mrs x0, spsr_el2
tbnz x0, #20, 1f
/* if this was something else, then panic! */
tst x0, #PSR_IL_BIT
b.eq __hyp_panic
save_caller_saved_regs_vect
stp x29, x30, [sp, #-16]!
bl kvm_unexpected_el2_exception
ldp x29, x30, [sp], #16
restore_caller_saved_regs_vect
eret
1:
/* Let's attempt a recovery from the illegal exception return */
get_vcpu_ptr x1, x0
mov x0, #ARM_EXCEPTION_IL
@ -157,27 +187,14 @@ el2_sync:
el2_error:
ldp x0, x1, [sp], #16
save_caller_saved_regs_vect
stp x29, x30, [sp, #-16]!
bl kvm_unexpected_el2_exception
ldp x29, x30, [sp], #16
restore_caller_saved_regs_vect
/*
* Only two possibilities:
* 1) Either we come from the exit path, having just unmasked
* PSTATE.A: change the return code to an EL2 fault, and
* carry on, as we're already in a sane state to handle it.
* 2) Or we come from anywhere else, and that's a bug: we panic.
*
* For (1), x0 contains the original return code and x1 doesn't
* contain anything meaningful at that stage. We can reuse them
* as temp registers.
* For (2), who cares?
*/
mrs x0, elr_el2
adr x1, abort_guest_exit_start
cmp x0, x1
adr x1, abort_guest_exit_end
ccmp x0, x1, #4, ne
b.ne __hyp_panic
mov x0, #(1 << ARM_EXIT_WITH_SERROR_BIT)
eret
sb

60
arch/arm64/kvm/hyp/include/hyp/debug-sr.h
View File

@ -21,70 +21,70 @@
#define save_debug(ptr,reg,nr) \
switch (nr) { \
case 15: ptr[15] = read_debug(reg, 15); \
/* Fall through */ \
fallthrough; \
case 14: ptr[14] = read_debug(reg, 14); \
/* Fall through */ \
fallthrough; \
case 13: ptr[13] = read_debug(reg, 13); \
/* Fall through */ \
fallthrough; \
case 12: ptr[12] = read_debug(reg, 12); \
/* Fall through */ \
fallthrough; \
case 11: ptr[11] = read_debug(reg, 11); \
/* Fall through */ \
fallthrough; \
case 10: ptr[10] = read_debug(reg, 10); \
/* Fall through */ \
fallthrough; \
case 9: ptr[9] = read_debug(reg, 9); \
/* Fall through */ \
fallthrough; \
case 8: ptr[8] = read_debug(reg, 8); \
/* Fall through */ \
fallthrough; \
case 7: ptr[7] = read_debug(reg, 7); \
/* Fall through */ \
fallthrough; \
case 6: ptr[6] = read_debug(reg, 6); \
/* Fall through */ \
fallthrough; \
case 5: ptr[5] = read_debug(reg, 5); \
/* Fall through */ \
fallthrough; \
case 4: ptr[4] = read_debug(reg, 4); \
/* Fall through */ \
fallthrough; \
case 3: ptr[3] = read_debug(reg, 3); \
/* Fall through */ \
fallthrough; \
case 2: ptr[2] = read_debug(reg, 2); \
/* Fall through */ \
fallthrough; \
case 1: ptr[1] = read_debug(reg, 1); \
/* Fall through */ \
fallthrough; \
default: ptr[0] = read_debug(reg, 0); \
}
#define restore_debug(ptr,reg,nr) \
switch (nr) { \
case 15: write_debug(ptr[15], reg, 15); \
/* Fall through */ \
fallthrough; \
case 14: write_debug(ptr[14], reg, 14); \
/* Fall through */ \
fallthrough; \
case 13: write_debug(ptr[13], reg, 13); \
/* Fall through */ \
fallthrough; \
case 12: write_debug(ptr[12], reg, 12); \
/* Fall through */ \
fallthrough; \
case 11: write_debug(ptr[11], reg, 11); \
/* Fall through */ \
fallthrough; \
case 10: write_debug(ptr[10], reg, 10); \
/* Fall through */ \
fallthrough; \
case 9: write_debug(ptr[9], reg, 9); \
/* Fall through */ \
fallthrough; \
case 8: write_debug(ptr[8], reg, 8); \
/* Fall through */ \
fallthrough; \
case 7: write_debug(ptr[7], reg, 7); \
/* Fall through */ \
fallthrough; \
case 6: write_debug(ptr[6], reg, 6); \
/* Fall through */ \
fallthrough; \
case 5: write_debug(ptr[5], reg, 5); \
/* Fall through */ \
fallthrough; \
case 4: write_debug(ptr[4], reg, 4); \
/* Fall through */ \
fallthrough; \
case 3: write_debug(ptr[3], reg, 3); \
/* Fall through */ \
fallthrough; \
case 2: write_debug(ptr[2], reg, 2); \
/* Fall through */ \
fallthrough; \
case 1: write_debug(ptr[1], reg, 1); \
/* Fall through */ \
fallthrough; \
default: write_debug(ptr[0], reg, 0); \
}

39
arch/arm64/kvm/hyp/include/hyp/switch.h
View File

@ -17,6 +17,7 @@
#include <asm/barrier.h>
#include <asm/cpufeature.h>
#include <asm/extable.h>
#include <asm/kprobes.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_emulate.h>
@ -29,6 +30,9 @@
extern const char __hyp_panic_string[];
extern struct exception_table_entry __start___kvm_ex_table;
extern struct exception_table_entry __stop___kvm_ex_table;
/* Check whether the FP regs were dirtied while in the host-side run loop: */
static inline bool update_fp_enabled(struct kvm_vcpu *vcpu)
{
@ -142,10 +146,10 @@ static inline bool __translate_far_to_hpfar(u64 far, u64 *hpfar)
* saved the guest context yet, and we may return early...
*/
par = read_sysreg(par_el1);
asm volatile("at s1e1r, %0" : : "r" (far));
isb();
tmp = read_sysreg(par_el1);
if (!__kvm_at("s1e1r", far))
tmp = read_sysreg(par_el1);
else
tmp = SYS_PAR_EL1_F; /* back to the guest */
write_sysreg(par, par_el1);
if (unlikely(tmp & SYS_PAR_EL1_F))
@ -508,4 +512,31 @@ static inline void __set_host_arch_workaround_state(struct kvm_vcpu *vcpu)
#endif
}
static inline void __kvm_unexpected_el2_exception(void)
{
unsigned long addr, fixup;
struct kvm_cpu_context *host_ctxt;
struct exception_table_entry *entry, *end;
unsigned long elr_el2 = read_sysreg(elr_el2);
entry = hyp_symbol_addr(__start___kvm_ex_table);
end = hyp_symbol_addr(__stop___kvm_ex_table);
host_ctxt = &__hyp_this_cpu_ptr(kvm_host_data)->host_ctxt;
while (entry < end) {
addr = (unsigned long)&entry->insn + entry->insn;
fixup = (unsigned long)&entry->fixup + entry->fixup;
if (addr != elr_el2) {
entry++;
continue;
}
write_sysreg(fixup, elr_el2);
return;
}
hyp_panic(host_ctxt);
}
#endif /* __ARM64_KVM_HYP_SWITCH_H__ */

5
arch/arm64/kvm/hyp/nvhe/switch.c
View File

@ -270,3 +270,8 @@ void __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
read_sysreg(hpfar_el2), par, vcpu);
unreachable();
}
asmlinkage void kvm_unexpected_el2_exception(void)
{
return __kvm_unexpected_el2_exception();
}

16
arch/arm64/kvm/hyp/vgic-v3-sr.c
View File

@ -340,10 +340,10 @@ void __vgic_v3_save_aprs(struct vgic_v3_cpu_if *cpu_if)
case 7:
cpu_if->vgic_ap0r[3] = __vgic_v3_read_ap0rn(3);
cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2);
/* Fall through */
fallthrough;
case 6:
cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1);
/* Fall through */
fallthrough;
default:
cpu_if->vgic_ap0r[0] = __vgic_v3_read_ap0rn(0);
}
@ -352,10 +352,10 @@ void __vgic_v3_save_aprs(struct vgic_v3_cpu_if *cpu_if)
case 7:
cpu_if->vgic_ap1r[3] = __vgic_v3_read_ap1rn(3);
cpu_if->vgic_ap1r[2] = __vgic_v3_read_ap1rn(2);
/* Fall through */
fallthrough;
case 6:
cpu_if->vgic_ap1r[1] = __vgic_v3_read_ap1rn(1);
/* Fall through */
fallthrough;
default:
cpu_if->vgic_ap1r[0] = __vgic_v3_read_ap1rn(0);
}
@ -373,10 +373,10 @@ void __vgic_v3_restore_aprs(struct vgic_v3_cpu_if *cpu_if)
case 7:
__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[3], 3);
__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[2], 2);
/* Fall through */
fallthrough;
case 6:
__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[1], 1);
/* Fall through */
fallthrough;
default:
__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[0], 0);
}
@ -385,10 +385,10 @@ void __vgic_v3_restore_aprs(struct vgic_v3_cpu_if *cpu_if)
case 7:
__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[3], 3);
__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[2], 2);
/* Fall through */
fallthrough;
case 6:
__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[1], 1);
/* Fall through */
fallthrough;
default:
__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[0], 0);
}

5
arch/arm64/kvm/hyp/vhe/switch.c
View File

@ -217,3 +217,8 @@ void __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
__hyp_call_panic(spsr, elr, par, host_ctxt);
unreachable();
}
asmlinkage void kvm_unexpected_el2_exception(void)
{
return __kvm_unexpected_el2_exception();
}

2
arch/arm64/mm/context.c
View File

@ -45,7 +45,7 @@ static u32 get_cpu_asid_bits(void)
default:
pr_warn("CPU%d: Unknown ASID size (%d); assuming 8-bit\n",
smp_processor_id(), fld);
/* Fallthrough */
fallthrough;
case 0:
asid = 8;
break;

4
arch/c6x/kernel/signal.c
View File

@ -220,7 +220,7 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
regs->a4 = -EINTR;
break;
}
/* fallthrough */
fallthrough;
case -ERESTARTNOINTR:
do_restart:
regs->a4 = regs->orig_a4;
@ -252,7 +252,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs,
break;
}
/* fallthrough */
fallthrough;
case -ERESTARTNOINTR:
regs->a4 = regs->orig_a4;
regs->pc -= 4;

2
arch/csky/kernel/signal.c
View File

@ -194,7 +194,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
regs->a0 = -EINTR;
break;
}
/* fallthrough */
fallthrough;
case -ERESTARTNOINTR:
regs->a0 = regs->orig_a0;
regs->pc -= TRAP0_SIZE;

2
arch/h8300/kernel/signal.c
View File

@ -227,7 +227,7 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka)
regs->er0 = -EINTR;
break;
}
/* fallthrough */
fallthrough;
case -ERESTARTNOINTR:
do_restart:
regs->er0 = regs->orig_er0;

2
arch/hexagon/kernel/module.c
View File

@ -120,7 +120,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
}
case R_HEXAGON_HI16:
value = (value>>16) & 0xffff;
/* fallthrough */
fallthrough;
case R_HEXAGON_LO16:
*location &= ~0x00c03fff;
*location |= value & 0x3fff;

2
arch/hexagon/kernel/signal.c
View File

@ -155,7 +155,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
regs->r00 = -EINTR;
break;
}
/* Fall through */
fallthrough;
case -ERESTARTNOINTR:
regs->r06 = regs->syscall_nr;
pt_set_elr(regs, pt_elr(regs) - 4);

2
arch/ia64/kernel/crash.c
View File

@ -163,7 +163,7 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
case DIE_INIT_MONARCH_LEAVE:
if (!kdump_freeze_monarch)
break;
/* fall through */
fallthrough;
case DIE_INIT_SLAVE_LEAVE:
case DIE_INIT_MONARCH_ENTER:
case DIE_MCA_RENDZVOUS_LEAVE:

Some files were not shown because too many files have changed in this diff Show More