mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others
This driver supports Freescale NFC (NAND flash controller) found on Vybrid (VF610), MPC5125, MCF54418 and Kinetis K70. The driver has been tested using 8-bit and 16-bit NAND interface on the ARM based Vybrid SoC VF500 and VF610 platform. parameter page reading. Limitations: - Untested on MPC5125 and M54418. - DMA and pipelining not used. - 2K pages or less. - No chip select, one NAND chip per controller. - No hardware ECC. Some paths have been hand-optimized and evaluated by measurements made using mtd_speedtest.ko on a 100MB MTD partition. Colibri VF50 eb write % eb read % page write % page read % rel/opt 5175 11537 4560 11039 opt 5164 -0.21 11420 -1.01 4737 +3.88 10918 -1.10 none 5113 -1.20 11352 -1.60 4490 -1.54 10865 -1.58 Colibri VF61 eb write % eb read % page write % page read % rel/opt 5766 13096 5459 12846 opt 5883 +2.03 13064 -0.24 5561 +1.87 12802 -0.34 none 5701 -1.13 12980 -0.89 5488 +0.53 12735 -0.86 rel = using readl_relaxed/writel_relaxed in optimized paths opt = hand-optimized by combining multiple accesses into one read/write The measurements have not been statistically verfied, hence use them with care. The author came to the conclusion that using the relaxed variants of readl/writel are not worth the additional code. Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com> Tested-by: Albert ARIBAUD <albert.aribaud@3adev.fr> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This commit is contained in:
parent
53bb724f94
commit
456930d80a
|
@ -11056,6 +11056,12 @@ S: Maintained
|
||||||
F: Documentation/fb/uvesafb.txt
|
F: Documentation/fb/uvesafb.txt
|
||||||
F: drivers/video/fbdev/uvesafb.*
|
F: drivers/video/fbdev/uvesafb.*
|
||||||
|
|
||||||
|
VF610 NAND DRIVER
|
||||||
|
M: Stefan Agner <stefan@agner.ch>
|
||||||
|
L: linux-mtd@lists.infradead.org
|
||||||
|
S: Supported
|
||||||
|
F: drivers/mtd/nand/vf610_nfc.c
|
||||||
|
|
||||||
VFAT/FAT/MSDOS FILESYSTEM
|
VFAT/FAT/MSDOS FILESYSTEM
|
||||||
M: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
M: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
||||||
S: Maintained
|
S: Maintained
|
||||||
|
|
|
@ -460,6 +460,15 @@ config MTD_NAND_MPC5121_NFC
|
||||||
This enables the driver for the NAND flash controller on the
|
This enables the driver for the NAND flash controller on the
|
||||||
MPC5121 SoC.
|
MPC5121 SoC.
|
||||||
|
|
||||||
|
config MTD_NAND_VF610_NFC
|
||||||
|
tristate "Support for Freescale NFC for VF610/MPC5125"
|
||||||
|
depends on (SOC_VF610 || COMPILE_TEST)
|
||||||
|
help
|
||||||
|
Enables support for NAND Flash Controller on some Freescale
|
||||||
|
processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
|
||||||
|
The driver supports a maximum 2k page size. The driver
|
||||||
|
currently does not support hardware ECC.
|
||||||
|
|
||||||
config MTD_NAND_MXC
|
config MTD_NAND_MXC
|
||||||
tristate "MXC NAND support"
|
tristate "MXC NAND support"
|
||||||
depends on ARCH_MXC
|
depends on ARCH_MXC
|
||||||
|
|
|
@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
|
||||||
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
|
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
|
||||||
obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
|
obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
|
||||||
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
|
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
|
||||||
|
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
|
||||||
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
|
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
|
||||||
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
|
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
|
||||||
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
|
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
|
||||||
|
|
686
drivers/mtd/nand/vf610_nfc.c
Normal file
686
drivers/mtd/nand/vf610_nfc.c
Normal file
|
@ -0,0 +1,686 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2009-2015 Freescale Semiconductor, Inc. and others
|
||||||
|
*
|
||||||
|
* Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
|
||||||
|
* Jason ported to M54418TWR and MVFA5 (VF610).
|
||||||
|
* Authors: Stefan Agner <stefan.agner@toradex.com>
|
||||||
|
* Bill Pringlemeir <bpringlemeir@nbsps.com>
|
||||||
|
* Shaohui Xie <b21989@freescale.com>
|
||||||
|
* Jason Jin <Jason.jin@freescale.com>
|
||||||
|
*
|
||||||
|
* Based on original driver mpc5121_nfc.c.
|
||||||
|
*
|
||||||
|
* This is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* Limitations:
|
||||||
|
* - Untested on MPC5125 and M54418.
|
||||||
|
* - DMA and pipelining not used.
|
||||||
|
* - 2K pages or less.
|
||||||
|
* - No chip select, one NAND chip per controller.
|
||||||
|
* - No hardware ECC.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/bitops.h>
|
||||||
|
#include <linux/clk.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
#include <linux/mtd/mtd.h>
|
||||||
|
#include <linux/mtd/nand.h>
|
||||||
|
#include <linux/mtd/partitions.h>
|
||||||
|
#include <linux/of_mtd.h>
|
||||||
|
#include <linux/of_device.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/slab.h>
|
||||||
|
|
||||||
|
#define DRV_NAME "vf610_nfc"
|
||||||
|
|
||||||
|
/* Register Offsets */
|
||||||
|
#define NFC_FLASH_CMD1 0x3F00
|
||||||
|
#define NFC_FLASH_CMD2 0x3F04
|
||||||
|
#define NFC_COL_ADDR 0x3F08
|
||||||
|
#define NFC_ROW_ADDR 0x3F0c
|
||||||
|
#define NFC_ROW_ADDR_INC 0x3F14
|
||||||
|
#define NFC_FLASH_STATUS1 0x3F18
|
||||||
|
#define NFC_FLASH_STATUS2 0x3F1c
|
||||||
|
#define NFC_CACHE_SWAP 0x3F28
|
||||||
|
#define NFC_SECTOR_SIZE 0x3F2c
|
||||||
|
#define NFC_FLASH_CONFIG 0x3F30
|
||||||
|
#define NFC_IRQ_STATUS 0x3F38
|
||||||
|
|
||||||
|
/* Addresses for NFC MAIN RAM BUFFER areas */
|
||||||
|
#define NFC_MAIN_AREA(n) ((n) * 0x1000)
|
||||||
|
|
||||||
|
#define PAGE_2K 0x0800
|
||||||
|
#define OOB_64 0x0040
|
||||||
|
#define OOB_MAX 0x0100
|
||||||
|
|
||||||
|
/*
|
||||||
|
* NFC_CMD2[CODE] values. See section:
|
||||||
|
* - 31.4.7 Flash Command Code Description, Vybrid manual
|
||||||
|
* - 23.8.6 Flash Command Sequencer, MPC5125 manual
|
||||||
|
*
|
||||||
|
* Briefly these are bitmasks of controller cycles.
|
||||||
|
*/
|
||||||
|
#define READ_PAGE_CMD_CODE 0x7EE0
|
||||||
|
#define READ_ONFI_PARAM_CMD_CODE 0x4860
|
||||||
|
#define PROGRAM_PAGE_CMD_CODE 0x7FC0
|
||||||
|
#define ERASE_CMD_CODE 0x4EC0
|
||||||
|
#define READ_ID_CMD_CODE 0x4804
|
||||||
|
#define RESET_CMD_CODE 0x4040
|
||||||
|
#define STATUS_READ_CMD_CODE 0x4068
|
||||||
|
|
||||||
|
/* NFC ECC mode define */
|
||||||
|
#define ECC_BYPASS 0
|
||||||
|
|
||||||
|
/*** Register Mask and bit definitions */
|
||||||
|
|
||||||
|
/* NFC_FLASH_CMD1 Field */
|
||||||
|
#define CMD_BYTE2_MASK 0xFF000000
|
||||||
|
#define CMD_BYTE2_SHIFT 24
|
||||||
|
|
||||||
|
/* NFC_FLASH_CM2 Field */
|
||||||
|
#define CMD_BYTE1_MASK 0xFF000000
|
||||||
|
#define CMD_BYTE1_SHIFT 24
|
||||||
|
#define CMD_CODE_MASK 0x00FFFF00
|
||||||
|
#define CMD_CODE_SHIFT 8
|
||||||
|
#define BUFNO_MASK 0x00000006
|
||||||
|
#define BUFNO_SHIFT 1
|
||||||
|
#define START_BIT BIT(0)
|
||||||
|
|
||||||
|
/* NFC_COL_ADDR Field */
|
||||||
|
#define COL_ADDR_MASK 0x0000FFFF
|
||||||
|
#define COL_ADDR_SHIFT 0
|
||||||
|
|
||||||
|
/* NFC_ROW_ADDR Field */
|
||||||
|
#define ROW_ADDR_MASK 0x00FFFFFF
|
||||||
|
#define ROW_ADDR_SHIFT 0
|
||||||
|
#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000
|
||||||
|
#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28
|
||||||
|
#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000
|
||||||
|
#define ROW_ADDR_CHIP_SEL_SHIFT 24
|
||||||
|
|
||||||
|
/* NFC_FLASH_STATUS2 Field */
|
||||||
|
#define STATUS_BYTE1_MASK 0x000000FF
|
||||||
|
|
||||||
|
/* NFC_FLASH_CONFIG Field */
|
||||||
|
#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000
|
||||||
|
#define CONFIG_ECC_SRAM_ADDR_SHIFT 22
|
||||||
|
#define CONFIG_ECC_SRAM_REQ_BIT BIT(21)
|
||||||
|
#define CONFIG_DMA_REQ_BIT BIT(20)
|
||||||
|
#define CONFIG_ECC_MODE_MASK 0x000E0000
|
||||||
|
#define CONFIG_ECC_MODE_SHIFT 17
|
||||||
|
#define CONFIG_FAST_FLASH_BIT BIT(16)
|
||||||
|
#define CONFIG_16BIT BIT(7)
|
||||||
|
#define CONFIG_BOOT_MODE_BIT BIT(6)
|
||||||
|
#define CONFIG_ADDR_AUTO_INCR_BIT BIT(5)
|
||||||
|
#define CONFIG_BUFNO_AUTO_INCR_BIT BIT(4)
|
||||||
|
#define CONFIG_PAGE_CNT_MASK 0xF
|
||||||
|
#define CONFIG_PAGE_CNT_SHIFT 0
|
||||||
|
|
||||||
|
/* NFC_IRQ_STATUS Field */
|
||||||
|
#define IDLE_IRQ_BIT BIT(29)
|
||||||
|
#define IDLE_EN_BIT BIT(20)
|
||||||
|
#define CMD_DONE_CLEAR_BIT BIT(18)
|
||||||
|
#define IDLE_CLEAR_BIT BIT(17)
|
||||||
|
|
||||||
|
enum vf610_nfc_alt_buf {
|
||||||
|
ALT_BUF_DATA = 0,
|
||||||
|
ALT_BUF_ID = 1,
|
||||||
|
ALT_BUF_STAT = 2,
|
||||||
|
ALT_BUF_ONFI = 3,
|
||||||
|
};
|
||||||
|
|
||||||
|
enum vf610_nfc_variant {
|
||||||
|
NFC_VFC610 = 1,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct vf610_nfc {
|
||||||
|
struct mtd_info mtd;
|
||||||
|
struct nand_chip chip;
|
||||||
|
struct device *dev;
|
||||||
|
void __iomem *regs;
|
||||||
|
struct completion cmd_done;
|
||||||
|
uint buf_offset;
|
||||||
|
int write_sz;
|
||||||
|
/* Status and ID are in alternate locations. */
|
||||||
|
enum vf610_nfc_alt_buf alt_buf;
|
||||||
|
enum vf610_nfc_variant variant;
|
||||||
|
struct clk *clk;
|
||||||
|
};
|
||||||
|
|
||||||
|
#define mtd_to_nfc(_mtd) container_of(_mtd, struct vf610_nfc, mtd)
|
||||||
|
|
||||||
|
static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
|
||||||
|
{
|
||||||
|
return readl(nfc->regs + reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void vf610_nfc_write(struct vf610_nfc *nfc, uint reg, u32 val)
|
||||||
|
{
|
||||||
|
writel(val, nfc->regs + reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void vf610_nfc_set(struct vf610_nfc *nfc, uint reg, u32 bits)
|
||||||
|
{
|
||||||
|
vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) | bits);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void vf610_nfc_clear(struct vf610_nfc *nfc, uint reg, u32 bits)
|
||||||
|
{
|
||||||
|
vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) & ~bits);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void vf610_nfc_set_field(struct vf610_nfc *nfc, u32 reg,
|
||||||
|
u32 mask, u32 shift, u32 val)
|
||||||
|
{
|
||||||
|
vf610_nfc_write(nfc, reg,
|
||||||
|
(vf610_nfc_read(nfc, reg) & (~mask)) | val << shift);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void vf610_nfc_memcpy(void *dst, const void __iomem *src,
|
||||||
|
size_t n)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* Use this accessor for the internal SRAM buffers. On the ARM
|
||||||
|
* Freescale Vybrid SoC it's known that the driver can treat
|
||||||
|
* the SRAM buffer as if it's memory. Other platform might need
|
||||||
|
* to treat the buffers differently.
|
||||||
|
*
|
||||||
|
* For the time being, use memcpy
|
||||||
|
*/
|
||||||
|
memcpy(dst, src, n);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Clear flags for upcoming command */
|
||||||
|
static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc)
|
||||||
|
{
|
||||||
|
u32 tmp = vf610_nfc_read(nfc, NFC_IRQ_STATUS);
|
||||||
|
|
||||||
|
tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
|
||||||
|
vf610_nfc_write(nfc, NFC_IRQ_STATUS, tmp);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_done(struct vf610_nfc *nfc)
|
||||||
|
{
|
||||||
|
unsigned long timeout = msecs_to_jiffies(100);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Barrier is needed after this write. This write need
|
||||||
|
* to be done before reading the next register the first
|
||||||
|
* time.
|
||||||
|
* vf610_nfc_set implicates such a barrier by using writel
|
||||||
|
* to write to the register.
|
||||||
|
*/
|
||||||
|
vf610_nfc_set(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
|
||||||
|
vf610_nfc_set(nfc, NFC_FLASH_CMD2, START_BIT);
|
||||||
|
|
||||||
|
if (!wait_for_completion_timeout(&nfc->cmd_done, timeout))
|
||||||
|
dev_warn(nfc->dev, "Timeout while waiting for BUSY.\n");
|
||||||
|
|
||||||
|
vf610_nfc_clear_status(nfc);
|
||||||
|
}
|
||||||
|
|
||||||
|
static u8 vf610_nfc_get_id(struct vf610_nfc *nfc, int col)
|
||||||
|
{
|
||||||
|
u32 flash_id;
|
||||||
|
|
||||||
|
if (col < 4) {
|
||||||
|
flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS1);
|
||||||
|
flash_id >>= (3 - col) * 8;
|
||||||
|
} else {
|
||||||
|
flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS2);
|
||||||
|
flash_id >>= 24;
|
||||||
|
}
|
||||||
|
|
||||||
|
return flash_id & 0xff;
|
||||||
|
}
|
||||||
|
|
||||||
|
static u8 vf610_nfc_get_status(struct vf610_nfc *nfc)
|
||||||
|
{
|
||||||
|
return vf610_nfc_read(nfc, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_send_command(struct vf610_nfc *nfc, u32 cmd_byte1,
|
||||||
|
u32 cmd_code)
|
||||||
|
{
|
||||||
|
u32 tmp;
|
||||||
|
|
||||||
|
vf610_nfc_clear_status(nfc);
|
||||||
|
|
||||||
|
tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD2);
|
||||||
|
tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK);
|
||||||
|
tmp |= cmd_byte1 << CMD_BYTE1_SHIFT;
|
||||||
|
tmp |= cmd_code << CMD_CODE_SHIFT;
|
||||||
|
vf610_nfc_write(nfc, NFC_FLASH_CMD2, tmp);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_send_commands(struct vf610_nfc *nfc, u32 cmd_byte1,
|
||||||
|
u32 cmd_byte2, u32 cmd_code)
|
||||||
|
{
|
||||||
|
u32 tmp;
|
||||||
|
|
||||||
|
vf610_nfc_send_command(nfc, cmd_byte1, cmd_code);
|
||||||
|
|
||||||
|
tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD1);
|
||||||
|
tmp &= ~CMD_BYTE2_MASK;
|
||||||
|
tmp |= cmd_byte2 << CMD_BYTE2_SHIFT;
|
||||||
|
vf610_nfc_write(nfc, NFC_FLASH_CMD1, tmp);
|
||||||
|
}
|
||||||
|
|
||||||
|
static irqreturn_t vf610_nfc_irq(int irq, void *data)
|
||||||
|
{
|
||||||
|
struct mtd_info *mtd = data;
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
|
||||||
|
vf610_nfc_clear(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
|
||||||
|
complete(&nfc->cmd_done);
|
||||||
|
|
||||||
|
return IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_addr_cycle(struct vf610_nfc *nfc, int column, int page)
|
||||||
|
{
|
||||||
|
if (column != -1) {
|
||||||
|
if (nfc->chip.options & NAND_BUSWIDTH_16)
|
||||||
|
column = column / 2;
|
||||||
|
vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK,
|
||||||
|
COL_ADDR_SHIFT, column);
|
||||||
|
}
|
||||||
|
if (page != -1)
|
||||||
|
vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK,
|
||||||
|
ROW_ADDR_SHIFT, page);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void vf610_nfc_transfer_size(struct vf610_nfc *nfc, int size)
|
||||||
|
{
|
||||||
|
vf610_nfc_write(nfc, NFC_SECTOR_SIZE, size);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
|
||||||
|
int column, int page)
|
||||||
|
{
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
int trfr_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0;
|
||||||
|
|
||||||
|
nfc->buf_offset = max(column, 0);
|
||||||
|
nfc->alt_buf = ALT_BUF_DATA;
|
||||||
|
|
||||||
|
switch (command) {
|
||||||
|
case NAND_CMD_SEQIN:
|
||||||
|
/* Use valid column/page from preread... */
|
||||||
|
vf610_nfc_addr_cycle(nfc, column, page);
|
||||||
|
/*
|
||||||
|
* SEQIN => data => PAGEPROG sequence is done by the controller
|
||||||
|
* hence we do not need to issue the command here...
|
||||||
|
*/
|
||||||
|
return;
|
||||||
|
case NAND_CMD_PAGEPROG:
|
||||||
|
trfr_sz += nfc->write_sz;
|
||||||
|
vf610_nfc_transfer_size(nfc, trfr_sz);
|
||||||
|
vf610_nfc_send_commands(nfc, NAND_CMD_SEQIN,
|
||||||
|
command, PROGRAM_PAGE_CMD_CODE);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case NAND_CMD_RESET:
|
||||||
|
vf610_nfc_transfer_size(nfc, 0);
|
||||||
|
vf610_nfc_send_command(nfc, command, RESET_CMD_CODE);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case NAND_CMD_READOOB:
|
||||||
|
trfr_sz += mtd->oobsize;
|
||||||
|
column = mtd->writesize;
|
||||||
|
vf610_nfc_transfer_size(nfc, trfr_sz);
|
||||||
|
vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
|
||||||
|
NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
|
||||||
|
vf610_nfc_addr_cycle(nfc, column, page);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case NAND_CMD_READ0:
|
||||||
|
trfr_sz += mtd->writesize + mtd->oobsize;
|
||||||
|
vf610_nfc_transfer_size(nfc, trfr_sz);
|
||||||
|
vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
|
||||||
|
NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
|
||||||
|
vf610_nfc_addr_cycle(nfc, column, page);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case NAND_CMD_PARAM:
|
||||||
|
nfc->alt_buf = ALT_BUF_ONFI;
|
||||||
|
trfr_sz = 3 * sizeof(struct nand_onfi_params);
|
||||||
|
vf610_nfc_transfer_size(nfc, trfr_sz);
|
||||||
|
vf610_nfc_send_command(nfc, command, READ_ONFI_PARAM_CMD_CODE);
|
||||||
|
vf610_nfc_addr_cycle(nfc, -1, column);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case NAND_CMD_ERASE1:
|
||||||
|
vf610_nfc_transfer_size(nfc, 0);
|
||||||
|
vf610_nfc_send_commands(nfc, command,
|
||||||
|
NAND_CMD_ERASE2, ERASE_CMD_CODE);
|
||||||
|
vf610_nfc_addr_cycle(nfc, column, page);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case NAND_CMD_READID:
|
||||||
|
nfc->alt_buf = ALT_BUF_ID;
|
||||||
|
nfc->buf_offset = 0;
|
||||||
|
vf610_nfc_transfer_size(nfc, 0);
|
||||||
|
vf610_nfc_send_command(nfc, command, READ_ID_CMD_CODE);
|
||||||
|
vf610_nfc_addr_cycle(nfc, -1, column);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case NAND_CMD_STATUS:
|
||||||
|
nfc->alt_buf = ALT_BUF_STAT;
|
||||||
|
vf610_nfc_transfer_size(nfc, 0);
|
||||||
|
vf610_nfc_send_command(nfc, command, STATUS_READ_CMD_CODE);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
vf610_nfc_done(nfc);
|
||||||
|
|
||||||
|
nfc->write_sz = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
||||||
|
{
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
uint c = nfc->buf_offset;
|
||||||
|
|
||||||
|
/* Alternate buffers are only supported through read_byte */
|
||||||
|
WARN_ON(nfc->alt_buf);
|
||||||
|
|
||||||
|
vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len);
|
||||||
|
|
||||||
|
nfc->buf_offset += len;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
|
||||||
|
int len)
|
||||||
|
{
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
uint c = nfc->buf_offset;
|
||||||
|
uint l;
|
||||||
|
|
||||||
|
l = min_t(uint, len, mtd->writesize + mtd->oobsize - c);
|
||||||
|
vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
|
||||||
|
|
||||||
|
nfc->write_sz += l;
|
||||||
|
nfc->buf_offset += l;
|
||||||
|
}
|
||||||
|
|
||||||
|
static uint8_t vf610_nfc_read_byte(struct mtd_info *mtd)
|
||||||
|
{
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
u8 tmp;
|
||||||
|
uint c = nfc->buf_offset;
|
||||||
|
|
||||||
|
switch (nfc->alt_buf) {
|
||||||
|
case ALT_BUF_ID:
|
||||||
|
tmp = vf610_nfc_get_id(nfc, c);
|
||||||
|
break;
|
||||||
|
case ALT_BUF_STAT:
|
||||||
|
tmp = vf610_nfc_get_status(nfc);
|
||||||
|
break;
|
||||||
|
#ifdef __LITTLE_ENDIAN
|
||||||
|
case ALT_BUF_ONFI:
|
||||||
|
/* Reverse byte since the controller uses big endianness */
|
||||||
|
c = nfc->buf_offset ^ 0x3;
|
||||||
|
/* fall-through */
|
||||||
|
#endif
|
||||||
|
default:
|
||||||
|
tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c));
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
nfc->buf_offset++;
|
||||||
|
return tmp;
|
||||||
|
}
|
||||||
|
|
||||||
|
static u16 vf610_nfc_read_word(struct mtd_info *mtd)
|
||||||
|
{
|
||||||
|
u16 tmp;
|
||||||
|
|
||||||
|
vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
|
||||||
|
return tmp;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* If not provided, upper layers apply a fixed delay. */
|
||||||
|
static int vf610_nfc_dev_ready(struct mtd_info *mtd)
|
||||||
|
{
|
||||||
|
/* NFC handles R/B internally; always ready. */
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This function supports Vybrid only (MPC5125 would have full RB and four CS)
|
||||||
|
*/
|
||||||
|
static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip)
|
||||||
|
{
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
u32 tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
|
||||||
|
|
||||||
|
/* Vybrid only (MPC5125 would have full RB and four CS) */
|
||||||
|
if (nfc->variant != NFC_VFC610)
|
||||||
|
return;
|
||||||
|
|
||||||
|
tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
|
||||||
|
|
||||||
|
if (chip >= 0) {
|
||||||
|
tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
|
||||||
|
tmp |= BIT(chip) << ROW_ADDR_CHIP_SEL_SHIFT;
|
||||||
|
}
|
||||||
|
|
||||||
|
vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id vf610_nfc_dt_ids[] = {
|
||||||
|
{ .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 },
|
||||||
|
{ /* sentinel */ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids);
|
||||||
|
|
||||||
|
static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc)
|
||||||
|
{
|
||||||
|
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
|
||||||
|
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
|
||||||
|
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
|
||||||
|
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
|
||||||
|
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
|
||||||
|
vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
|
||||||
|
|
||||||
|
/* Disable virtual pages, only one elementary transfer unit */
|
||||||
|
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
|
||||||
|
CONFIG_PAGE_CNT_SHIFT, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
|
||||||
|
{
|
||||||
|
if (nfc->chip.options & NAND_BUSWIDTH_16)
|
||||||
|
vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
|
||||||
|
else
|
||||||
|
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int vf610_nfc_probe(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct vf610_nfc *nfc;
|
||||||
|
struct resource *res;
|
||||||
|
struct mtd_info *mtd;
|
||||||
|
struct nand_chip *chip;
|
||||||
|
struct device_node *child;
|
||||||
|
const struct of_device_id *of_id;
|
||||||
|
int err;
|
||||||
|
int irq;
|
||||||
|
|
||||||
|
nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
|
||||||
|
if (!nfc)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
nfc->dev = &pdev->dev;
|
||||||
|
mtd = &nfc->mtd;
|
||||||
|
chip = &nfc->chip;
|
||||||
|
|
||||||
|
mtd->priv = chip;
|
||||||
|
mtd->owner = THIS_MODULE;
|
||||||
|
mtd->dev.parent = nfc->dev;
|
||||||
|
mtd->name = DRV_NAME;
|
||||||
|
|
||||||
|
irq = platform_get_irq(pdev, 0);
|
||||||
|
if (irq <= 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||||
|
nfc->regs = devm_ioremap_resource(nfc->dev, res);
|
||||||
|
if (IS_ERR(nfc->regs))
|
||||||
|
return PTR_ERR(nfc->regs);
|
||||||
|
|
||||||
|
nfc->clk = devm_clk_get(&pdev->dev, NULL);
|
||||||
|
if (IS_ERR(nfc->clk))
|
||||||
|
return PTR_ERR(nfc->clk);
|
||||||
|
|
||||||
|
err = clk_prepare_enable(nfc->clk);
|
||||||
|
if (err) {
|
||||||
|
dev_err(nfc->dev, "Unable to enable clock!\n");
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
|
||||||
|
nfc->variant = (enum vf610_nfc_variant)of_id->data;
|
||||||
|
|
||||||
|
for_each_available_child_of_node(nfc->dev->of_node, child) {
|
||||||
|
if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) {
|
||||||
|
|
||||||
|
if (chip->flash_node) {
|
||||||
|
dev_err(nfc->dev,
|
||||||
|
"Only one NAND chip supported!\n");
|
||||||
|
err = -EINVAL;
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
chip->flash_node = child;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!chip->flash_node) {
|
||||||
|
dev_err(nfc->dev, "NAND chip sub-node missing!\n");
|
||||||
|
err = -ENODEV;
|
||||||
|
goto err_clk;
|
||||||
|
}
|
||||||
|
|
||||||
|
chip->dev_ready = vf610_nfc_dev_ready;
|
||||||
|
chip->cmdfunc = vf610_nfc_command;
|
||||||
|
chip->read_byte = vf610_nfc_read_byte;
|
||||||
|
chip->read_word = vf610_nfc_read_word;
|
||||||
|
chip->read_buf = vf610_nfc_read_buf;
|
||||||
|
chip->write_buf = vf610_nfc_write_buf;
|
||||||
|
chip->select_chip = vf610_nfc_select_chip;
|
||||||
|
|
||||||
|
chip->options |= NAND_NO_SUBPAGE_WRITE;
|
||||||
|
|
||||||
|
init_completion(&nfc->cmd_done);
|
||||||
|
|
||||||
|
err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, mtd);
|
||||||
|
if (err) {
|
||||||
|
dev_err(nfc->dev, "Error requesting IRQ!\n");
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
vf610_nfc_preinit_controller(nfc);
|
||||||
|
|
||||||
|
/* first scan to find the device and get the page size */
|
||||||
|
if (nand_scan_ident(mtd, 1, NULL)) {
|
||||||
|
err = -ENXIO;
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
vf610_nfc_init_controller(nfc);
|
||||||
|
|
||||||
|
/* Bad block options. */
|
||||||
|
if (chip->bbt_options & NAND_BBT_USE_FLASH)
|
||||||
|
chip->bbt_options |= NAND_BBT_NO_OOB;
|
||||||
|
|
||||||
|
/* Single buffer only, max 256 OOB minus ECC status */
|
||||||
|
if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
|
||||||
|
dev_err(nfc->dev, "Unsupported flash page size\n");
|
||||||
|
err = -ENXIO;
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* second phase scan */
|
||||||
|
if (nand_scan_tail(mtd)) {
|
||||||
|
err = -ENXIO;
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
|
|
||||||
|
platform_set_drvdata(pdev, mtd);
|
||||||
|
|
||||||
|
/* Register device in MTD */
|
||||||
|
return mtd_device_parse_register(mtd, NULL,
|
||||||
|
&(struct mtd_part_parser_data){
|
||||||
|
.of_node = chip->flash_node,
|
||||||
|
},
|
||||||
|
NULL, 0);
|
||||||
|
|
||||||
|
error:
|
||||||
|
of_node_put(chip->flash_node);
|
||||||
|
err_clk:
|
||||||
|
clk_disable_unprepare(nfc->clk);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int vf610_nfc_remove(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct mtd_info *mtd = platform_get_drvdata(pdev);
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
|
||||||
|
nand_release(mtd);
|
||||||
|
clk_disable_unprepare(nfc->clk);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_PM_SLEEP
|
||||||
|
static int vf610_nfc_suspend(struct device *dev)
|
||||||
|
{
|
||||||
|
struct mtd_info *mtd = dev_get_drvdata(dev);
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
|
||||||
|
clk_disable_unprepare(nfc->clk);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int vf610_nfc_resume(struct device *dev)
|
||||||
|
{
|
||||||
|
struct mtd_info *mtd = dev_get_drvdata(dev);
|
||||||
|
struct vf610_nfc *nfc = mtd_to_nfc(mtd);
|
||||||
|
|
||||||
|
pinctrl_pm_select_default_state(dev);
|
||||||
|
|
||||||
|
clk_prepare_enable(nfc->clk);
|
||||||
|
|
||||||
|
vf610_nfc_preinit_controller(nfc);
|
||||||
|
vf610_nfc_init_controller(nfc);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume);
|
||||||
|
|
||||||
|
static struct platform_driver vf610_nfc_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = DRV_NAME,
|
||||||
|
.of_match_table = vf610_nfc_dt_ids,
|
||||||
|
.pm = &vf610_nfc_pm_ops,
|
||||||
|
},
|
||||||
|
.probe = vf610_nfc_probe,
|
||||||
|
.remove = vf610_nfc_remove,
|
||||||
|
};
|
||||||
|
|
||||||
|
module_platform_driver(vf610_nfc_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
|
||||||
|
MODULE_DESCRIPTION("Freescale VF610/MPC5125 NFC MTD NAND driver");
|
||||||
|
MODULE_LICENSE("GPL");
|
Loading…
Reference in a new issue