mtd: add helper functions library and header files for GPMI NAND driver
bch-regs.h : registers file for BCH module gpmi-regs.h: registers file for GPMI module gpmi-lib.c: helper functions library. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
This commit is contained in:
Huang Shijie
Artem Bityutskiy
parent
4d523b60ef
commit
45dfc1a09a
84
drivers/mtd/nand/gpmi-nand/bch-regs.h
Normal file
84
drivers/mtd/nand/gpmi-nand/bch-regs.h
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
/*
|
||||
* Freescale GPMI NAND Flash Driver
|
||||
*
|
||||
* Copyright 2008-2011 Freescale Semiconductor, Inc.
|
||||
* Copyright 2008 Embedded Alley Solutions, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*/
|
||||
#ifndef __GPMI_NAND_BCH_REGS_H
|
||||
#define __GPMI_NAND_BCH_REGS_H
|
||||
|
||||
#define HW_BCH_CTRL 0x00000000
|
||||
#define HW_BCH_CTRL_SET 0x00000004
|
||||
#define HW_BCH_CTRL_CLR 0x00000008
|
||||
#define HW_BCH_CTRL_TOG 0x0000000c
|
||||
|
||||
#define BM_BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
|
||||
#define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
|
||||
|
||||
#define HW_BCH_STATUS0 0x00000010
|
||||
#define HW_BCH_MODE 0x00000020
|
||||
#define HW_BCH_ENCODEPTR 0x00000030
|
||||
#define HW_BCH_DATAPTR 0x00000040
|
||||
#define HW_BCH_METAPTR 0x00000050
|
||||
#define HW_BCH_LAYOUTSELECT 0x00000070
|
||||
|
||||
#define HW_BCH_FLASH0LAYOUT0 0x00000080
|
||||
|
||||
#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
|
||||
#define BM_BCH_FLASH0LAYOUT0_NBLOCKS (0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
|
||||
#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v) \
|
||||
(((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
|
||||
|
||||
#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
|
||||
#define BM_BCH_FLASH0LAYOUT0_META_SIZE (0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
|
||||
#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v) \
|
||||
(((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
|
||||
& BM_BCH_FLASH0LAYOUT0_META_SIZE)
|
||||
|
||||
#define BP_BCH_FLASH0LAYOUT0_ECC0 12
|
||||
#define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
|
||||
#define BF_BCH_FLASH0LAYOUT0_ECC0(v) \
|
||||
(((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
|
||||
|
||||
#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
|
||||
#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
|
||||
(0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
|
||||
#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v) \
|
||||
(((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
|
||||
& BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
|
||||
|
||||
#define HW_BCH_FLASH0LAYOUT1 0x00000090
|
||||
|
||||
#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
|
||||
#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE \
|
||||
(0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
|
||||
#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v) \
|
||||
(((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
|
||||
& BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
|
||||
|
||||
#define BP_BCH_FLASH0LAYOUT1_ECCN 12
|
||||
#define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
|
||||
#define BF_BCH_FLASH0LAYOUT1_ECCN(v) \
|
||||
(((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
|
||||
|
||||
#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
|
||||
#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
|
||||
(0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
|
||||
#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v) \
|
||||
(((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
|
||||
& BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
|
||||
#endif
|
||||
1057
drivers/mtd/nand/gpmi-nand/gpmi-lib.c
Normal file
1057
drivers/mtd/nand/gpmi-nand/gpmi-lib.c
Normal file
File diff suppressed because it is too large
Load diff
172
drivers/mtd/nand/gpmi-nand/gpmi-regs.h
Normal file
172
drivers/mtd/nand/gpmi-nand/gpmi-regs.h
Normal file
|
|
@ -0,0 +1,172 @@
|
|||
/*
|
||||
* Freescale GPMI NAND Flash Driver
|
||||
*
|
||||
* Copyright 2008-2011 Freescale Semiconductor, Inc.
|
||||
* Copyright 2008 Embedded Alley Solutions, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*/
|
||||
#ifndef __GPMI_NAND_GPMI_REGS_H
|
||||
#define __GPMI_NAND_GPMI_REGS_H
|
||||
|
||||
#define HW_GPMI_CTRL0 0x00000000
|
||||
#define HW_GPMI_CTRL0_SET 0x00000004
|
||||
#define HW_GPMI_CTRL0_CLR 0x00000008
|
||||
#define HW_GPMI_CTRL0_TOG 0x0000000c
|
||||
|
||||
#define BP_GPMI_CTRL0_COMMAND_MODE 24
|
||||
#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE)
|
||||
#define BF_GPMI_CTRL0_COMMAND_MODE(v) \
|
||||
(((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
|
||||
#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
|
||||
#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
|
||||
#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
|
||||
#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
|
||||
|
||||
#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23)
|
||||
#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
|
||||
#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1
|
||||
|
||||
/*
|
||||
* Difference in LOCK_CS between imx23 and imx28 :
|
||||
* This bit may impact the _POWER_ consumption. So some chips
|
||||
* do not set it.
|
||||
*/
|
||||
#define MX23_BP_GPMI_CTRL0_LOCK_CS 22
|
||||
#define MX28_BP_GPMI_CTRL0_LOCK_CS 27
|
||||
#define LOCK_CS_ENABLE 0x1
|
||||
#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0
|
||||
|
||||
/* Difference in CS between imx23 and imx28 */
|
||||
#define BP_GPMI_CTRL0_CS 20
|
||||
#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS)
|
||||
#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS)
|
||||
#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \
|
||||
(GPMI_IS_MX23((x)) \
|
||||
? MX23_BM_GPMI_CTRL0_CS \
|
||||
: MX28_BM_GPMI_CTRL0_CS))
|
||||
|
||||
#define BP_GPMI_CTRL0_ADDRESS 17
|
||||
#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS)
|
||||
#define BF_GPMI_CTRL0_ADDRESS(v) \
|
||||
(((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
|
||||
#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
|
||||
#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
|
||||
#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
|
||||
|
||||
#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
|
||||
#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
|
||||
#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1
|
||||
|
||||
#define BP_GPMI_CTRL0_XFER_COUNT 0
|
||||
#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT)
|
||||
#define BF_GPMI_CTRL0_XFER_COUNT(v) \
|
||||
(((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
|
||||
|
||||
#define HW_GPMI_COMPARE 0x00000010
|
||||
|
||||
#define HW_GPMI_ECCCTRL 0x00000020
|
||||
#define HW_GPMI_ECCCTRL_SET 0x00000024
|
||||
#define HW_GPMI_ECCCTRL_CLR 0x00000028
|
||||
#define HW_GPMI_ECCCTRL_TOG 0x0000002c
|
||||
|
||||
#define BP_GPMI_ECCCTRL_ECC_CMD 13
|
||||
#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD)
|
||||
#define BF_GPMI_ECCCTRL_ECC_CMD(v) \
|
||||
(((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
|
||||
#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0
|
||||
#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1
|
||||
|
||||
#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
|
||||
#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1
|
||||
#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
|
||||
|
||||
#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
|
||||
#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
|
||||
#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \
|
||||
(((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
|
||||
#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
|
||||
#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF
|
||||
|
||||
#define HW_GPMI_ECCCOUNT 0x00000030
|
||||
#define HW_GPMI_PAYLOAD 0x00000040
|
||||
#define HW_GPMI_AUXILIARY 0x00000050
|
||||
#define HW_GPMI_CTRL1 0x00000060
|
||||
#define HW_GPMI_CTRL1_SET 0x00000064
|
||||
#define HW_GPMI_CTRL1_CLR 0x00000068
|
||||
#define HW_GPMI_CTRL1_TOG 0x0000006c
|
||||
|
||||
#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
|
||||
|
||||
#define BP_GPMI_CTRL1_DLL_ENABLE 17
|
||||
#define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE)
|
||||
|
||||
#define BP_GPMI_CTRL1_HALF_PERIOD 16
|
||||
#define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD)
|
||||
|
||||
#define BP_GPMI_CTRL1_RDN_DELAY 12
|
||||
#define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY)
|
||||
#define BF_GPMI_CTRL1_RDN_DELAY(v) \
|
||||
(((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
|
||||
|
||||
#define BM_GPMI_CTRL1_DEV_RESET (1 << 3)
|
||||
#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0
|
||||
#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
|
||||
|
||||
#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
|
||||
#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0
|
||||
#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
|
||||
|
||||
#define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1)
|
||||
#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
|
||||
#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1
|
||||
|
||||
#define BM_GPMI_CTRL1_GPMI_MODE (1 << 0)
|
||||
|
||||
#define HW_GPMI_TIMING0 0x00000070
|
||||
|
||||
#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
|
||||
#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
|
||||
#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \
|
||||
(((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
|
||||
|
||||
#define BP_GPMI_TIMING0_DATA_HOLD 8
|
||||
#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD)
|
||||
#define BF_GPMI_TIMING0_DATA_HOLD(v) \
|
||||
(((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
|
||||
|
||||
#define BP_GPMI_TIMING0_DATA_SETUP 0
|
||||
#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP)
|
||||
#define BF_GPMI_TIMING0_DATA_SETUP(v) \
|
||||
(((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
|
||||
|
||||
#define HW_GPMI_TIMING1 0x00000080
|
||||
#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16
|
||||
|
||||
#define HW_GPMI_TIMING2 0x00000090
|
||||
#define HW_GPMI_DATA 0x000000a0
|
||||
|
||||
/* MX28 uses this to detect READY. */
|
||||
#define HW_GPMI_STAT 0x000000b0
|
||||
#define MX28_BP_GPMI_STAT_READY_BUSY 24
|
||||
#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY)
|
||||
#define MX28_BF_GPMI_STAT_READY_BUSY(v) \
|
||||
(((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
|
||||
|
||||
/* MX23 uses this to detect READY. */
|
||||
#define HW_GPMI_DEBUG 0x000000c0
|
||||
#define MX23_BP_GPMI_DEBUG_READY0 28
|
||||
#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0)
|
||||
#endif
|
||||
Loading…
Reference in a new issue