redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARC: [plat-hsdk] Get rid of inappropriate PHY settings 

Initial bring-up of the platform was done on FPGA prototype
where TI's DP83867 PHY was used. And so some specific PHY
options were added.

Just to confirm this is what we get on FPGA prototype in the bootlog:
| TI DP83867 stmmac-0:00: attached PHY driver [TI DP83867] ...

On real board though we have Micrel KZS9031 PHY and we even have
CONFIG_MICREL_PHY=y set in hsdk_defconfig. That's what we see in the bootlog:
| Micrel KSZ9031 Gigabit PHY stmmac-0:00: ...

So essentially all TI-related bits have to go away.

Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
hifive-unleashed-5.2
Alexey Brodkin 2019-05-15 18:33:40 +03:00 committed by Vineet Gupta
parent b04700645d
commit 46e04c25e7
1 changed files with 0 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arc/boot/dts/hsdk.dts
View File

@ -11,7 +11,6 @@
*/
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/reset/snps,hsdk-reset.h>
/ {
@ -223,9 +222,6 @@
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
};