ARM: dts: clps711x: Add DT Cirrus Logic EDB7211 Development board
This adds the Cirrus Logic EP7209,EP7211 DT templates and support for EDB7211 Development board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>hifive-unleashed-5.1
Alexander Shiyan
Arnd Bergmann
parent
8fe9c8b750
commit
46e6b3aa65
|
|
@ -109,6 +109,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
|
|||
berlin2q-marvell-dmp.dtb
|
||||
dtb-$(CONFIG_ARCH_BRCMSTB) += \
|
||||
bcm7445-bcm97445svmb.dtb
|
||||
dtb-$(CONFIG_ARCH_CLPS711X) += \
|
||||
ep7211-edb7211.dtb
|
||||
dtb-$(CONFIG_ARCH_DAVINCI) += \
|
||||
da850-enbw-cmc.dtb \
|
||||
da850-evm.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,191 @@
|
|||
/*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
#include <dt-bindings/clock/clps711x-clock.h>
|
||||
|
||||
/ {
|
||||
model = "Cirrus Logic EP7209";
|
||||
compatible = "cirrus,ep7209";
|
||||
|
||||
aliases {
|
||||
gpio0 = &porta;
|
||||
gpio1 = &portb;
|
||||
gpio3 = &portd;
|
||||
gpio4 = &porte;
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
spi0 = &spi;
|
||||
timer0 = &timer1;
|
||||
timer1 = &timer2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,arm720t";
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
interrupt-parent = <&intc>;
|
||||
ranges;
|
||||
|
||||
clks: clks@80000000 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "cirrus,ep7209-clk";
|
||||
reg = <0x80000000 0xc000>;
|
||||
startup-frequency = <73728000>;
|
||||
};
|
||||
|
||||
intc: intc@80000000 {
|
||||
compatible = "cirrus,ep7209-intc";
|
||||
reg = <0x80000000 0x4000>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
porta: gpio@80000000 {
|
||||
compatible = "cirrus,ep7209-gpio";
|
||||
reg = <0x80000000 0x1 0x80000040 0x1>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
portb: gpio@80000001 {
|
||||
compatible = "cirrus,ep7209-gpio";
|
||||
reg = <0x80000001 0x1 0x80000041 0x1>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
portd: gpio@80000003 {
|
||||
compatible = "cirrus,ep7209-gpio";
|
||||
reg = <0x80000003 0x1 0x80000043 0x1>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
porte: gpio@80000083 {
|
||||
compatible = "cirrus,ep7209-gpio";
|
||||
reg = <0x80000083 0x1 0x800000c3 0x1>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
syscon1: syscon@80000100 {
|
||||
compatible = "cirrus,ep7209-syscon1", "syscon";
|
||||
reg = <0x80000100 0x80>;
|
||||
};
|
||||
|
||||
bus: bus@80000180 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cirrus,ep7209-bus", "simple-bus";
|
||||
clocks = <&clks CLPS711X_CLK_BUS>;
|
||||
reg = <0x80000180 0x80>;
|
||||
ranges = <
|
||||
0 0 0x00000000 0x10000000
|
||||
1 0 0x10000000 0x10000000
|
||||
2 0 0x20000000 0x10000000
|
||||
3 0 0x30000000 0x10000000
|
||||
4 0 0x40000000 0x10000000
|
||||
5 0 0x50000000 0x10000000
|
||||
6 0 0x60000000 0x0000c000
|
||||
7 0 0x70000000 0x00000080
|
||||
>;
|
||||
};
|
||||
|
||||
fb: fb@800002c0 {
|
||||
compatible = "cirrus,ep7209-fb";
|
||||
reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
|
||||
clocks = <&clks CLPS711X_CLK_BUS>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer1: timer@80000300 {
|
||||
compatible = "cirrus,ep7209-timer";
|
||||
reg = <0x80000300 0x4>;
|
||||
clocks = <&clks CLPS711X_CLK_TIMER1>;
|
||||
interrupts = <8>;
|
||||
};
|
||||
|
||||
timer2: timer@80000340 {
|
||||
compatible = "cirrus,ep7209-timer";
|
||||
reg = <0x80000340 0x4>;
|
||||
clocks = <&clks CLPS711X_CLK_TIMER2>;
|
||||
interrupts = <9>;
|
||||
};
|
||||
|
||||
pwm: pwm@80000400 {
|
||||
compatible = "cirrus,ep7209-pwm";
|
||||
reg = <0x80000400 0x4>;
|
||||
clocks = <&clks CLPS711X_CLK_PWM>;
|
||||
#pwm-cells = <1>;
|
||||
};
|
||||
|
||||
uart1: uart@80000480 {
|
||||
compatible = "cirrus,ep7209-uart";
|
||||
reg = <0x80000480 0x80>;
|
||||
interrupts = <12 13>;
|
||||
clocks = <&clks CLPS711X_CLK_UART>;
|
||||
syscon = <&syscon1>;
|
||||
};
|
||||
|
||||
spi: spi@80000500 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "cirrus,ep7209-spi";
|
||||
reg = <0x80000500 0x4>;
|
||||
interrupts = <15>;
|
||||
clocks = <&clks CLPS711X_CLK_SPI>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
syscon2: syscon@80001100 {
|
||||
compatible = "cirrus,ep7209-syscon2", "syscon";
|
||||
reg = <0x80001100 0x80>;
|
||||
};
|
||||
|
||||
uart2: uart@80001480 {
|
||||
compatible = "cirrus,ep7209-uart";
|
||||
reg = <0x80001480 0x80>;
|
||||
interrupts = <28 29>;
|
||||
clocks = <&clks CLPS711X_CLK_UART>;
|
||||
syscon = <&syscon2>;
|
||||
};
|
||||
|
||||
dai: dai@80002000 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "cirrus,ep7209-dai";
|
||||
reg = <0x80002000 0x604>;
|
||||
clocks = <&clks CLPS711X_CLK_PLL>;
|
||||
clock-names = "pll";
|
||||
interrupts = <32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
syscon3: syscon@80002200 {
|
||||
compatible = "cirrus,ep7209-syscon3", "syscon";
|
||||
reg = <0x80002200 0x40>;
|
||||
};
|
||||
};
|
||||
|
||||
mctrl: mctrl {
|
||||
compatible = "cirrus,ep7209-mctrl-gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,100 @@
|
|||
/*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*/
|
||||
|
||||
#include "ep7211.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Cirrus Logic EP7211 Development Board";
|
||||
compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
|
||||
|
||||
memory {
|
||||
reg = <0xc0000000 0x02000000>;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0>;
|
||||
brightness-levels = <
|
||||
0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
|
||||
0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
|
||||
>;
|
||||
default-brightness-level = <0x0>;
|
||||
power-supply = <&blen>;
|
||||
};
|
||||
|
||||
display: display {
|
||||
model = "320x240x4";
|
||||
native-mode = <&timing0>;
|
||||
bits-per-pixel = <4>;
|
||||
ac-prescale = <17>;
|
||||
|
||||
display-timings {
|
||||
timing0: 320x240 {
|
||||
hactive = <320>;
|
||||
hback-porch = <0>;
|
||||
hfront-porch = <0>;
|
||||
hsync-len = <0>;
|
||||
vactive = <240>;
|
||||
vback-porch = <0>;
|
||||
vfront-porch = <0>;
|
||||
vsync-len = <0>;
|
||||
clock-frequency = <6500000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c: i2c {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
|
||||
<&portd 5 GPIO_ACTIVE_HIGH>;
|
||||
i2c-gpio,delay-us = <2>;
|
||||
i2c-gpio,scl-output-only;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
lcddc: lcddc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "BACKLIGHT ENABLE";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
blen: blen {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "BACKLIGHT ENABLE";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&bus {
|
||||
flash: nor@00000000 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0x00000000 0x02000000>;
|
||||
bank-width = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&fb {
|
||||
display = <&display>;
|
||||
lcd-supply = <&lcddc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&portd {
|
||||
lcden {
|
||||
gpio-hog;
|
||||
gpios = <2 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "LCD ENABLE";
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
/*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*/
|
||||
|
||||
#include "ep7209.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Cirrus Logic EP7211";
|
||||
compatible = "cirrus,ep7211", "cirrus,ep7209";
|
||||
};
|
||||
Loading…
Reference in New Issue