Update Micrel KSZ90x1 binding documentation
Renames micrel-ksz9021.txt to micrel-ksz90x1.txt and adds documentation for the KSZ9031 binding from patch 1. Also adds step increment information, and note about phy fixups. Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>hifive-unleashed-5.1
Hubert Chaumette
David S. Miller
parent
698365fa18
commit
4b405efbe1
|
|
@ -1,49 +0,0 @@
|
|||
Micrel KSZ9021 Gigabit Ethernet PHY
|
||||
|
||||
Some boards require special tuning values, particularly when it comes to
|
||||
clock delays. You can specify clock delay values by adding
|
||||
micrel-specific properties to an Ethernet OF device node.
|
||||
|
||||
All skew control options are specified in picoseconds. The minimum
|
||||
value is 0, and the maximum value is 3000.
|
||||
|
||||
Optional properties:
|
||||
- rxc-skew-ps : Skew control of RXC pad
|
||||
- rxdv-skew-ps : Skew control of RX CTL pad
|
||||
- txc-skew-ps : Skew control of TXC pad
|
||||
- txen-skew-ps : Skew control of TX_CTL pad
|
||||
- rxd0-skew-ps : Skew control of RX data 0 pad
|
||||
- rxd1-skew-ps : Skew control of RX data 1 pad
|
||||
- rxd2-skew-ps : Skew control of RX data 2 pad
|
||||
- rxd3-skew-ps : Skew control of RX data 3 pad
|
||||
- txd0-skew-ps : Skew control of TX data 0 pad
|
||||
- txd1-skew-ps : Skew control of TX data 1 pad
|
||||
- txd2-skew-ps : Skew control of TX data 2 pad
|
||||
- txd3-skew-ps : Skew control of TX data 3 pad
|
||||
|
||||
Examples:
|
||||
|
||||
/* Attach to an Ethernet device with autodetected PHY */
|
||||
&enet {
|
||||
rxc-skew-ps = <3000>;
|
||||
rxdv-skew-ps = <0>;
|
||||
txc-skew-ps = <3000>;
|
||||
txen-skew-ps = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Attach to an explicitly-specified PHY */
|
||||
mdio {
|
||||
phy0: ethernet-phy@0 {
|
||||
rxc-skew-ps = <3000>;
|
||||
rxdv-skew-ps = <0>;
|
||||
txc-skew-ps = <3000>;
|
||||
txen-skew-ps = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
|
@ -0,0 +1,83 @@
|
|||
Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
|
||||
|
||||
Some boards require special tuning values, particularly when it comes to
|
||||
clock delays. You can specify clock delay values by adding
|
||||
micrel-specific properties to an Ethernet OF device node.
|
||||
|
||||
Note that these settings are applied after any phy-specific fixup from
|
||||
phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c),
|
||||
and therefore may overwrite them.
|
||||
|
||||
KSZ9021:
|
||||
|
||||
All skew control options are specified in picoseconds. The minimum
|
||||
value is 0, the maximum value is 3000, and it is incremented by 200ps
|
||||
steps.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- rxc-skew-ps : Skew control of RXC pad
|
||||
- rxdv-skew-ps : Skew control of RX CTL pad
|
||||
- txc-skew-ps : Skew control of TXC pad
|
||||
- txen-skew-ps : Skew control of TX CTL pad
|
||||
- rxd0-skew-ps : Skew control of RX data 0 pad
|
||||
- rxd1-skew-ps : Skew control of RX data 1 pad
|
||||
- rxd2-skew-ps : Skew control of RX data 2 pad
|
||||
- rxd3-skew-ps : Skew control of RX data 3 pad
|
||||
- txd0-skew-ps : Skew control of TX data 0 pad
|
||||
- txd1-skew-ps : Skew control of TX data 1 pad
|
||||
- txd2-skew-ps : Skew control of TX data 2 pad
|
||||
- txd3-skew-ps : Skew control of TX data 3 pad
|
||||
|
||||
KSZ9031:
|
||||
|
||||
All skew control options are specified in picoseconds. The minimum
|
||||
value is 0, and the maximum is property-dependent. The increment
|
||||
step is 60ps.
|
||||
|
||||
Optional properties:
|
||||
|
||||
Maximum value of 1860:
|
||||
|
||||
- rxc-skew-ps : Skew control of RX clock pad
|
||||
- txc-skew-ps : Skew control of TX clock pad
|
||||
|
||||
Maximum value of 900:
|
||||
|
||||
- rxdv-skew-ps : Skew control of RX CTL pad
|
||||
- txen-skew-ps : Skew control of TX CTL pad
|
||||
- rxd0-skew-ps : Skew control of RX data 0 pad
|
||||
- rxd1-skew-ps : Skew control of RX data 1 pad
|
||||
- rxd2-skew-ps : Skew control of RX data 2 pad
|
||||
- rxd3-skew-ps : Skew control of RX data 3 pad
|
||||
- txd0-skew-ps : Skew control of TX data 0 pad
|
||||
- txd1-skew-ps : Skew control of TX data 1 pad
|
||||
- txd2-skew-ps : Skew control of TX data 2 pad
|
||||
- txd3-skew-ps : Skew control of TX data 3 pad
|
||||
|
||||
Examples:
|
||||
|
||||
/* Attach to an Ethernet device with autodetected PHY */
|
||||
&enet {
|
||||
rxc-skew-ps = <3000>;
|
||||
rxdv-skew-ps = <0>;
|
||||
txc-skew-ps = <3000>;
|
||||
txen-skew-ps = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Attach to an explicitly-specified PHY */
|
||||
mdio {
|
||||
phy0: ethernet-phy@0 {
|
||||
rxc-skew-ps = <3000>;
|
||||
rxdv-skew-ps = <0>;
|
||||
txc-skew-ps = <3000>;
|
||||
txen-skew-ps = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
Loading…
Reference in New Issue