Merge branch 'stmmac-cleanups-for-stmmac_mdio_reset'

Martin Blumenstingl says:

====================
stmmac: cleanups for stmmac_mdio_reset

This is a successor to my previous series "stmmac: honor the GPIO flags
for the PHY reset GPIO" from [0]. It contains only the "cleanup"
patches from that series plus some additional cleanups on top.

I broke out the actual GPIO flag handling into a separate patch which
is already part of net-next: "net: stmmac: use GPIO descriptors in
stmmac_mdio_reset" from [1]

I have build and runtime tested this on my ARM Meson8b Odroid-C1.

[0] https://patchwork.kernel.org/cover/10983801/
[1] https://patchwork.ozlabs.org/patch/1114798/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c

@@ -24,9 +24,9 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/mii.h>
-#include <linux/of.h>
 #include <linux/of_mdio.h>
 #include <linux/phy.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 
 #include "dwxgmac2.h"
@@ -247,50 +247,35 @@ int stmmac_mdio_reset(struct mii_bus *bus)
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned int mii_address = priv->hw->mii.addr;
-	struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;
 
 #ifdef CONFIG_OF
 	if (priv->device->of_node) {
 		struct gpio_desc *reset_gpio;
+		u32 delays[3];
 
-		if (data->reset_gpio < 0) {
-			struct device_node *np = priv->device->of_node;
+		reset_gpio = devm_gpiod_get_optional(priv->device,
+						     "snps,reset",
+						     GPIOD_OUT_LOW);
+		if (IS_ERR(reset_gpio))
+			return PTR_ERR(reset_gpio);
 
-			if (!np)
-				return 0;
+		device_property_read_u32_array(priv->device,
+					       "snps,reset-delays-us",
+					       delays, ARRAY_SIZE(delays));
 
-			reset_gpio = devm_gpiod_get_optional(priv->device,
-							     "snps,reset",
-							     GPIOD_OUT_LOW);
-			if (IS_ERR(reset_gpio))
-				return PTR_ERR(reset_gpio);
-
-			of_property_read_u32_array(np,
-				"snps,reset-delays-us", data->delays, 3);
-		} else {
-			reset_gpio = gpio_to_desc(data->reset_gpio);
-
-			gpiod_direction_output(reset_gpio, 0);
-		}
-
-		if (data->delays[0])
-			msleep(DIV_ROUND_UP(data->delays[0], 1000));
+		if (delays[0])
+			msleep(DIV_ROUND_UP(delays[0], 1000));
 
 		gpiod_set_value_cansleep(reset_gpio, 1);
-		if (data->delays[1])
-			msleep(DIV_ROUND_UP(data->delays[1], 1000));
+		if (delays[1])
+			msleep(DIV_ROUND_UP(delays[1], 1000));
 
 		gpiod_set_value_cansleep(reset_gpio, 0);
-		if (data->delays[2])
-			msleep(DIV_ROUND_UP(data->delays[2], 1000));
+		if (delays[2])
+			msleep(DIV_ROUND_UP(delays[2], 1000));
 	}
 #endif
 
-	if (data->phy_reset) {
-		netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n");
-		data->phy_reset(priv->plat->bsp_priv);
-	}
-
 	/* This is a workaround for problems with the STE101P PHY.
 	 * It doesn't complete its reset until at least one clock cycle
 	 * on MDC, so perform a dummy mdio read. To be updated for GMAC4
@@ -327,11 +312,6 @@ int stmmac_mdio_register(struct net_device *ndev)
 	if (mdio_bus_data->irqs)
 		memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));
 
-#ifdef CONFIG_OF
-	if (priv->device->of_node)
-		mdio_bus_data->reset_gpio = -1;
-#endif
-
 	new_bus->name = "stmmac";
 
 	if (priv->plat->has_xgmac) {

drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c

@@ -73,7 +73,6 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
 
-	plat->mdio_bus_data->phy_reset = NULL;
 	plat->mdio_bus_data->phy_mask = 0;
 
 	/* Set default value for multicast hash bins */

include/linux/stmmac.h

@@ -92,14 +92,9 @@
 /* Platfrom data for platform device structure's platform_data field */
 
 struct stmmac_mdio_bus_data {
-	int (*phy_reset)(void *priv);
 	unsigned int phy_mask;
 	int *irqs;
 	int probed_phy_irq;
-#ifdef CONFIG_OF
-	int reset_gpio;
-	u32 delays[3];
-#endif
 };
 
 struct stmmac_dma_cfg {