redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

media: rc: harmonize infrared durations to microseconds 

rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.

Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.

Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.

This affects:
 - rx_resolution member of struct rc_dev
 - timeout member of struct rc_dev
 - duration member in struct ir_raw_event

Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
zero-sugar-mainline-defconfig
Sean Young 2020-08-23 19:23:05 +02:00 committed by Mauro Carvalho Chehab
parent 32c3db3d98
commit 528222d853
50 changed files with 188 additions and 208 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/hid/hid-picolcd_cir.c
View File

@ -59,10 +59,10 @@ int picolcd_raw_cir(struct picolcd_data *data,
for (i = 0; i+1 < sz; i += 2) {
w = (raw_data[i] << 8) | (raw_data[i+1]);
rawir.pulse = !!(w & 0x8000);
rawir.duration = US_TO_NS(rawir.pulse ? (65536 - w) : w);
rawir.duration = rawir.pulse ? (65536 - w) : w;
/* Quirk!! - see above */
if (i == 0 && rawir.duration > 15000000)
rawir.duration -= 15000000;
if (i == 0 && rawir.duration > 15000)
rawir.duration -= 15000;
ir_raw_event_store(data->rc_dev, &rawir);
}
ir_raw_event_handle(data->rc_dev);
@ -114,8 +114,8 @@ int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
rdev->dev.parent = &data->hdev->dev;
rdev->driver_name = PICOLCD_NAME;
rdev->map_name = RC_MAP_RC6_MCE;
rdev->timeout = MS_TO_NS(100);
rdev->rx_resolution = US_TO_NS(1);
rdev->timeout = MS_TO_US(100);
rdev->rx_resolution = 1;
ret = rc_register_device(rdev);
if (ret)

2
drivers/media/cec/core/cec-core.c
View File

@ -309,7 +309,7 @@ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
adap->rc->allowed_protocols = RC_PROTO_BIT_CEC;
adap->rc->priv = adap;
adap->rc->map_name = RC_MAP_CEC;
adap->rc->timeout = MS_TO_NS(550);
adap->rc->timeout = MS_TO_US(550);
#endif
return adap;
}

2
drivers/media/cec/platform/seco/seco-cec.c
View File

@ -369,7 +369,7 @@ static int secocec_ir_probe(void *priv)
cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
cec->ir->priv = cec;
cec->ir->map_name = RC_MAP_HAUPPAUGE;
cec->ir->timeout = MS_TO_NS(100);
cec->ir->timeout = MS_TO_US(100);
/* Clear the status register */
status = smb_rd16(SECOCEC_STATUS_REG_1, &val);

4
drivers/media/common/siano/smsir.c
View File

@ -27,7 +27,7 @@ void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
for (i = 0; i < len >> 2; i++) {
struct ir_raw_event ev = {
.duration = abs(samples[i]) * 1000, /* Convert to ns */
.duration = abs(samples[i]),
.pulse = (samples[i] > 0) ? false : true
};
@ -48,7 +48,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
return -ENOMEM;
coredev->ir.controller = 0; /* Todo: vega/nova SPI number */
coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
coredev->ir.timeout = US_TO_NS(IR_DEFAULT_TIMEOUT);
pr_debug("IR port %d, timeout %d ms\n",
coredev->ir.controller, coredev->ir.timeout);

2
drivers/media/i2c/cx25840/cx25840-ir.c
View File

@ -688,7 +688,7 @@ static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
}
v = (unsigned) pulse_width_count_to_ns(
(u16) (p->hw_fifo_data & FIFO_RXTX), divider);
(u16)(p->hw_fifo_data & FIFO_RXTX), divider) / 1000;
if (v > IR_MAX_DURATION)
v = IR_MAX_DURATION;

2
drivers/media/pci/cx23885/cx23888-ir.c
View File

@ -663,7 +663,7 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
}
v = (unsigned) pulse_width_count_to_ns(
(u16) (p->hw_fifo_data & FIFO_RXTX), divider);
(u16)(p->hw_fifo_data & FIFO_RXTX), divider) / 1000;
if (v > IR_MAX_DURATION)
v = IR_MAX_DURATION;

4
drivers/media/pci/cx88/cx88-input.c
View File

@ -479,7 +479,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
dev->scancode_mask = hardware_mask;
if (ir->sampling) {
dev->timeout = 10 * 1000 * 1000; /* 10 ms */
dev->timeout = MS_TO_US(10); /* 10 ms */
} else {
dev->driver_type = RC_DRIVER_SCANCODE;
dev->allowed_protocols = rc_proto;
@ -544,7 +544,7 @@ void cx88_ir_irq(struct cx88_core *core)
for (todo = 32; todo > 0; todo -= bits) {
ev.pulse = samples & 0x80000000 ? false : true;
bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
ev.duration = (bits * (NSEC_PER_SEC / 1000)) / ir_samplerate;
ev.duration = (bits * (USEC_PER_SEC / 1000)) / ir_samplerate;
ir_raw_event_store_with_filter(ir->dev, &ev);
samples <<= bits;
}

7
drivers/media/pci/smipcie/smipcie-ir.c
View File

@ -87,8 +87,7 @@ static void smi_ir_decode(struct smi_rc *ir)
struct ir_raw_event rawir = {};
rawir.pulse = 0;
rawir.duration = US_TO_NS(SMI_SAMPLE_PERIOD *
SMI_SAMPLE_IDLEMIN);
rawir.duration = SMI_SAMPLE_PERIOD * SMI_SAMPLE_IDLEMIN;
ir_raw_event_store_with_filter(rc_dev, &rawir);
smi_set(IR_Init_Reg, rbIRhighidle);
}
@ -151,8 +150,8 @@ int smi_ir_init(struct smi_dev *dev)
rc_dev->dev.parent = &dev->pci_dev->dev;
rc_dev->map_name = dev->info->rc_map;
rc_dev->timeout = MS_TO_NS(100);
rc_dev->rx_resolution = US_TO_NS(SMI_SAMPLE_PERIOD);
rc_dev->timeout = MS_TO_US(100);
rc_dev->rx_resolution = SMI_SAMPLE_PERIOD;
ir->rc_dev = rc_dev;
ir->dev = dev;

18
drivers/media/rc/ene_ir.c
View File

@ -432,27 +432,27 @@ static void ene_rx_setup(struct ene_device *dev)
select_timeout:
if (dev->rx_fan_input_inuse) {
dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
dev->rdev->rx_resolution = ENE_FW_SAMPLE_PERIOD_FAN;
/* Fan input doesn't support timeouts, it just ends the
input with a maximum sample */
dev->rdev->min_timeout = dev->rdev->max_timeout =
US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
ENE_FW_SAMPLE_PERIOD_FAN);
ENE_FW_SMPL_BUF_FAN_MSK *
ENE_FW_SAMPLE_PERIOD_FAN;
} else {
dev->rdev->rx_resolution = US_TO_NS(sample_period);
dev->rdev->rx_resolution = sample_period;
/* Theoreticly timeout is unlimited, but we cap it
* because it was seen that on one device, it
* would stop sending spaces after around 250 msec.
* Besides, this is close to 2^32 anyway and timeout is u32.
*/
dev->rdev->min_timeout = US_TO_NS(127 * sample_period);
dev->rdev->max_timeout = US_TO_NS(200000);
dev->rdev->min_timeout = 127 * sample_period;
dev->rdev->max_timeout = 200000;
}
if (dev->hw_learning_and_tx_capable)
dev->rdev->tx_resolution = US_TO_NS(sample_period);
dev->rdev->tx_resolution = sample_period;
if (dev->rdev->timeout > dev->rdev->max_timeout)
dev->rdev->timeout = dev->rdev->max_timeout;
@ -798,7 +798,7 @@ static irqreturn_t ene_isr(int irq, void *data)
dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
ev.duration = US_TO_NS(hw_sample);
ev.duration = hw_sample;
ev.pulse = pulse;
ir_raw_event_store_with_filter(dev->rdev, &ev);
}
@ -818,7 +818,7 @@ static void ene_setup_default_settings(struct ene_device *dev)
dev->learning_mode_enabled = learning_mode_force;
/* Set reasonable default timeout */
dev->rdev->timeout = US_TO_NS(150000);
dev->rdev->timeout = MS_TO_US(150);
}
/* Upload all hardware settings at once. Used at load and resume time */

8
drivers/media/rc/fintek-cir.c
View File

@ -299,8 +299,8 @@ static void fintek_process_rx_ir_data(struct fintek_dev *fintek)
case PARSE_IRDATA:
fintek->rem--;
rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
rawir.duration = US_TO_NS((sample & BUF_SAMPLE_MASK)
* CIR_SAMPLE_PERIOD);
rawir.duration = (sample & BUF_SAMPLE_MASK)
* CIR_SAMPLE_PERIOD;
fit_dbg("Storing %s with duration %d",
rawir.pulse ? "pulse" : "space",
@ -524,9 +524,9 @@ static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id
rdev->dev.parent = &pdev->dev;
rdev->driver_name = FINTEK_DRIVER_NAME;
rdev->map_name = RC_MAP_RC6_MCE;
rdev->timeout = US_TO_NS(1000);
rdev->timeout = 1000;
/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
rdev->rx_resolution = CIR_SAMPLE_PERIOD;
fintek->rdev = rdev;

6
drivers/media/rc/igorplugusb.c
View File

@ -69,7 +69,7 @@ static void igorplugusb_irdata(struct igorplugusb *ir, unsigned len)
overflow);
do {
rawir.duration = ir->buf_in[i] * 85333;
rawir.duration = ir->buf_in[i] * 85;
rawir.pulse = i & 1;
ir_raw_event_store_with_filter(ir->rc, &rawir);
@ -202,8 +202,8 @@ static int igorplugusb_probe(struct usb_interface *intf,
rc->priv = ir;
rc->driver_name = DRIVER_NAME;
rc->map_name = RC_MAP_HAUPPAUGE;
rc->timeout = MS_TO_NS(100);
rc->rx_resolution = 85333;
rc->timeout = MS_TO_US(100);
rc->rx_resolution = 85;
ir->rc = rc;
ret = rc_register_device(rc);

4
drivers/media/rc/iguanair.c
View File

@ -59,7 +59,7 @@ struct iguanair {
#define MAX_IN_PACKET 8u
#define MAX_OUT_PACKET (sizeof(struct send_packet) + BUF_SIZE)
#define TIMEOUT 1000
#define RX_RESOLUTION 21333
#define RX_RESOLUTION 21
struct packet {
uint16_t start;
@ -124,7 +124,7 @@ static void process_ir_data(struct iguanair *ir, unsigned len)
for (i = 0; i < 7; i++) {
if (ir->buf_in[i] == 0x80) {
rawir.pulse = false;
rawir.duration = US_TO_NS(21845);
rawir.duration = 21845;
} else {
rawir.pulse = (ir->buf_in[i] & 0x80) == 0;
rawir.duration = ((ir->buf_in[i] & 0x7f) + 1) *

2
drivers/media/rc/imon_raw.c
View File

@ -8,7 +8,7 @@
#include <media/rc-core.h>
/* Each bit is 250us */
#define BIT_DURATION 250000
#define BIT_DURATION 250
struct imon {
struct device *dev;

8
drivers/media/rc/ir-hix5hd2.c
View File

@ -214,12 +214,12 @@ static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
data_h = ((symb_val >> 16) & 0xffff) * 10;
symb_time = (data_l + data_h) / 10;
ev.duration = US_TO_NS(data_l);
ev.duration = data_l;
ev.pulse = true;
ir_raw_event_store(priv->rdev, &ev);
if (symb_time < IR_CFG_SYMBOL_MAXWIDTH) {
ev.duration = US_TO_NS(data_h);
ev.duration = data_h;
ev.pulse = false;
ir_raw_event_store(priv->rdev, &ev);
} else {
@ -311,8 +311,8 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
rdev->input_id.vendor = 0x0001;
rdev->input_id.product = 0x0001;
rdev->input_id.version = 0x0100;
rdev->rx_resolution = US_TO_NS(10);
rdev->timeout = US_TO_NS(IR_CFG_SYMBOL_MAXWIDTH * 10);
rdev->rx_resolution = 10;
rdev->timeout = IR_CFG_SYMBOL_MAXWIDTH * 10;
ret = rc_register_device(rdev);
if (ret < 0)

10
drivers/media/rc/ir-imon-decoder.c
View File

@ -8,7 +8,7 @@
#include <linux/module.h>
#include "rc-core-priv.h"
#define IMON_UNIT 415662 /* ns */
#define IMON_UNIT 416 /* us */
#define IMON_BITS 30
#define IMON_CHKBITS (BIT(30) | BIT(25) | BIT(24) | BIT(22) | \
BIT(21) | BIT(20) | BIT(19) | BIT(18) | \
@ -102,8 +102,7 @@ static int ir_imon_decode(struct rc_dev *dev, struct ir_raw_event ev)
dev_dbg(&dev->dev,
"iMON decode started at state %d bitno %d (%uus %s)\n",
data->state, data->count, TO_US(ev.duration),
TO_STR(ev.pulse));
data->state, data->count, ev.duration, TO_STR(ev.pulse));
/*
* Since iMON protocol is a series of bits, if at any point
@ -116,7 +115,7 @@ static int ir_imon_decode(struct rc_dev *dev, struct ir_raw_event ev)
* we're at a new scancode.
*/
if (data->state == STATE_ERROR) {
if (!ev.pulse && ev.duration > MS_TO_NS(10))
if (!ev.pulse && ev.duration > MS_TO_US(10))
data->state = STATE_INACTIVE;
return 0;
}
@ -169,8 +168,7 @@ static int ir_imon_decode(struct rc_dev *dev, struct ir_raw_event ev)
err_out:
dev_dbg(&dev->dev,
"iMON decode failed at state %d bitno %d (%uus %s)\n",
data->state, data->count, TO_US(ev.duration),
TO_STR(ev.pulse));
data->state, data->count, ev.duration, TO_STR(ev.pulse));
data->state = STATE_ERROR;

6
drivers/media/rc/ir-jvc-decoder.c
View File

@ -9,7 +9,7 @@
#include "rc-core-priv.h"
#define JVC_NBITS 16 /* dev(8) + func(8) */
#define JVC_UNIT 525000 /* ns */
#define JVC_UNIT 525 /* us */
#define JVC_HEADER_PULSE (16 * JVC_UNIT) /* lack of header -> repeat */
#define JVC_HEADER_SPACE (8 * JVC_UNIT)
#define JVC_BIT_PULSE (1 * JVC_UNIT)
@ -49,7 +49,7 @@ static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev)
goto out;
dev_dbg(&dev->dev, "JVC decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
again:
switch (data->state) {
@ -157,7 +157,7 @@ again:
out:
dev_dbg(&dev->dev, "JVC decode failed at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

6
drivers/media/rc/ir-mce_kbd-decoder.c
View File

@ -21,7 +21,7 @@
* input device for the remote, rather than the keyboard/mouse one.
*/
#define MCIR2_UNIT 333333 /* ns */
#define MCIR2_UNIT 333 /* us */
#define MCIR2_HEADER_NBITS 5
#define MCIR2_MOUSE_NBITS 29
#define MCIR2_KEYBOARD_NBITS 32
@ -231,7 +231,7 @@ static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)
again:
dev_dbg(&dev->dev, "started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2))
return 0;
@ -353,7 +353,7 @@ again:
out:
dev_dbg(&dev->dev, "failed at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

6
drivers/media/rc/ir-nec-decoder.c
View File

@ -8,7 +8,7 @@
#include "rc-core-priv.h"
#define NEC_NBITS 32
#define NEC_UNIT 562500 /* ns */
#define NEC_UNIT 563 /* us */
#define NEC_HEADER_PULSE (16 * NEC_UNIT)
#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */
#define NEC_HEADER_SPACE (8 * NEC_UNIT)
@ -50,7 +50,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "NEC decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
switch (data->state) {
@ -163,7 +163,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "NEC decode failed at count %d state %d (%uus %s)\n",
data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->count, data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

6
drivers/media/rc/ir-rc5-decoder.c
View File

@ -16,7 +16,7 @@
#define RC5_SZ_NBITS 15
#define RC5X_NBITS 20
#define CHECK_RC5X_NBITS 8
#define RC5_UNIT 888888 /* ns */
#define RC5_UNIT 889 /* us */
#define RC5_BIT_START (1 * RC5_UNIT)
#define RC5_BIT_END (1 * RC5_UNIT)
#define RC5X_SPACE (4 * RC5_UNIT)
@ -55,7 +55,7 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
again:
dev_dbg(&dev->dev, "RC5(x/sz) decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
return 0;
@ -164,7 +164,7 @@ again:
out:
dev_dbg(&dev->dev, "RC5(x/sz) decode failed at state %i count %d (%uus %s)\n",
data->state, data->count, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, data->count, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

6
drivers/media/rc/ir-rc6-decoder.c
View File

@ -15,7 +15,7 @@
* RC6-6A-32 (MCE version with toggle bit in body)
*/
#define RC6_UNIT 444444 /* nanosecs */
#define RC6_UNIT 444 /* microseconds */
#define RC6_HEADER_NBITS 4 /* not including toggle bit */
#define RC6_0_NBITS 16
#define RC6_6A_32_NBITS 32
@ -95,7 +95,7 @@ static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
again:
dev_dbg(&dev->dev, "RC6 decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
return 0;
@ -270,7 +270,7 @@ again:
out:
dev_dbg(&dev->dev, "RC6 decode failed at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

18
drivers/media/rc/ir-rcmm-decoder.c
View File

@ -6,12 +6,12 @@
#include "rc-core-priv.h"
#include <linux/module.h>
#define RCMM_UNIT 166667 /* nanosecs */
#define RCMM_PREFIX_PULSE 416666 /* 166666.666666666*2.5 */
#define RCMM_PULSE_0 277777 /* 166666.666666666*(1+2/3) */
#define RCMM_PULSE_1 444444 /* 166666.666666666*(2+2/3) */
#define RCMM_PULSE_2 611111 /* 166666.666666666*(3+2/3) */
#define RCMM_PULSE_3 777778 /* 166666.666666666*(4+2/3) */
#define RCMM_UNIT 166 /* microseconds */
#define RCMM_PREFIX_PULSE 417 /* 166.666666666666*2.5 */
#define RCMM_PULSE_0 278 /* 166.666666666666*(1+2/3) */
#define RCMM_PULSE_1 444 /* 166.666666666666*(2+2/3) */
#define RCMM_PULSE_2 611 /* 166.666666666666*(3+2/3) */
#define RCMM_PULSE_3 778 /* 166.666666666666*(4+2/3) */
enum rcmm_state {
STATE_INACTIVE,
@ -64,8 +64,8 @@ static int ir_rcmm_decode(struct rc_dev *dev, struct ir_raw_event ev)
int value;
if (!(dev->enabled_protocols & (RC_PROTO_BIT_RCMM32 |
RC_PROTO_BIT_RCMM24 |
RC_PROTO_BIT_RCMM12)))
RC_PROTO_BIT_RCMM24 |
RC_PROTO_BIT_RCMM12)))
return 0;
if (!is_timing_event(ev)) {
@ -165,7 +165,7 @@ static int ir_rcmm_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "RC-MM decode failed at count %d state %d (%uus %s)\n",
data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->count, data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

6
drivers/media/rc/ir-sanyo-decoder.c
View File

@ -17,7 +17,7 @@
#include "rc-core-priv.h"
#define SANYO_NBITS (13+13+8+8)
#define SANYO_UNIT 562500 /* ns */
#define SANYO_UNIT 563 /* us */
#define SANYO_HEADER_PULSE (16 * SANYO_UNIT)
#define SANYO_HEADER_SPACE (8 * SANYO_UNIT)
#define SANYO_BIT_PULSE (1 * SANYO_UNIT)
@ -59,7 +59,7 @@ static int ir_sanyo_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "SANYO decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
switch (data->state) {
@ -158,7 +158,7 @@ static int ir_sanyo_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "SANYO decode failed at count %d state %d (%uus %s)\n",
data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->count, data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

6
drivers/media/rc/ir-sharp-decoder.c
View File

@ -12,7 +12,7 @@
#include "rc-core-priv.h"
#define SHARP_NBITS 15
#define SHARP_UNIT 40000 /* ns */
#define SHARP_UNIT 40 /* us */
#define SHARP_BIT_PULSE (8 * SHARP_UNIT) /* 320us */
#define SHARP_BIT_0_PERIOD (25 * SHARP_UNIT) /* 1ms (680us space) */
#define SHARP_BIT_1_PERIOD (50 * SHARP_UNIT) /* 2ms (1680ms space) */
@ -47,7 +47,7 @@ static int ir_sharp_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "Sharp decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
switch (data->state) {
@ -159,7 +159,7 @@ static int ir_sharp_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "Sharp decode failed at count %d state %d (%uus %s)\n",
data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->count, data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

6
drivers/media/rc/ir-sony-decoder.c
View File

@ -8,7 +8,7 @@
#include <linux/module.h>
#include "rc-core-priv.h"
#define SONY_UNIT 600000 /* ns */
#define SONY_UNIT 600 /* us */
#define SONY_HEADER_PULSE (4 * SONY_UNIT)
#define SONY_HEADER_SPACE (1 * SONY_UNIT)
#define SONY_BIT_0_PULSE (1 * SONY_UNIT)
@ -48,7 +48,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
goto out;
dev_dbg(&dev->dev, "Sony decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
switch (data->state) {
@ -154,7 +154,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
out:
dev_dbg(&dev->dev, "Sony decode failed at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;

15
drivers/media/rc/ir-xmp-decoder.c
View File

@ -12,11 +12,12 @@
#include <linux/module.h>
#include "rc-core-priv.h"
#define XMP_UNIT 136000 /* ns */
#define XMP_LEADER 210000 /* ns */
#define XMP_NIBBLE_PREFIX 760000 /* ns */
#define XMP_HALFFRAME_SPACE 13800000 /* ns */
#define XMP_TRAILER_SPACE 20000000 /* should be 80ms but not all dureation supliers can go that high */
#define XMP_UNIT 136 /* us */
#define XMP_LEADER 210 /* us */
#define XMP_NIBBLE_PREFIX 760 /* us */
#define XMP_HALFFRAME_SPACE 13800 /* us */
/* should be 80ms but not all duration supliers can go that high */
#define XMP_TRAILER_SPACE 20000
enum xmp_state {
STATE_INACTIVE,
@ -42,7 +43,7 @@ static int ir_xmp_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "XMP decode started at state %d %d (%uus %s)\n",
data->state, data->count, TO_US(ev.duration), TO_STR(ev.pulse));
data->state, data->count, ev.duration, TO_STR(ev.pulse));
switch (data->state) {
@ -183,7 +184,7 @@ static int ir_xmp_decode(struct rc_dev *dev, struct ir_raw_event ev)
}
dev_dbg(&dev->dev, "XMP decode failed at count %d state %d (%uus %s)\n",
data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->count, data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}

14
drivers/media/rc/ir_toy.c
View File

@ -38,8 +38,8 @@ static const u8 COMMAND_TXSTART[] = { 0x26, 0x24, 0x25, 0x03 };
#define LEN_SAMPLEMODEPROTO 3
#define MIN_FW_VERSION 20
#define UNIT_NS 21333
#define MAX_TIMEOUT_NS (UNIT_NS * U16_MAX)
#define UNIT_US 21
#define MAX_TIMEOUT_US (UNIT_US * U16_MAX)
#define MAX_PACKET 64
@ -131,7 +131,7 @@ static void irtoy_response(struct irtoy *irtoy, u32 len)
if (v == 0xffff) {
rawir.pulse = false;
} else {
rawir.duration = v * UNIT_NS;
rawir.duration = v * UNIT_US;
ir_raw_event_store_with_timeout(irtoy->rc,
&rawir);
}
@ -302,7 +302,7 @@ static int irtoy_tx(struct rc_dev *rc, uint *txbuf, uint count)
return -ENOMEM;
for (i = 0; i < count; i++) {
u16 v = DIV_ROUND_CLOSEST(US_TO_NS(txbuf[i]), UNIT_NS);
u16 v = DIV_ROUND_CLOSEST(txbuf[i], UNIT_US);
if (!v)
v = 1;
@ -438,7 +438,7 @@ static int irtoy_probe(struct usb_interface *intf,
rc->tx_ir = irtoy_tx;
rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
rc->map_name = RC_MAP_RC6_MCE;
rc->rx_resolution = UNIT_NS;
rc->rx_resolution = UNIT_US;
rc->timeout = IR_DEFAULT_TIMEOUT;
/*
@ -450,8 +450,8 @@ static int irtoy_probe(struct usb_interface *intf,
*
* So, make timeout a largish minimum which works with most protocols.
*/
rc->min_timeout = MS_TO_NS(40);
rc->max_timeout = MAX_TIMEOUT_NS;
rc->min_timeout = MS_TO_US(40);
rc->max_timeout = MAX_TIMEOUT_US;
err = rc_register_device(rc);
if (err)

10
drivers/media/rc/ite-cir.c
View File

@ -176,14 +176,14 @@ static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int
if (next_one > 0) {
ev.pulse = true;
ev.duration =
ITE_BITS_TO_NS(next_one, sample_period);
ITE_BITS_TO_US(next_one, sample_period);
ir_raw_event_store_with_filter(dev->rdev, &ev);
}
while (next_one < size) {
next_zero = find_next_zero_bit_le(ldata, size, next_one + 1);
ev.pulse = false;
ev.duration = ITE_BITS_TO_NS(next_zero - next_one, sample_period);
ev.duration = ITE_BITS_TO_US(next_zero - next_one, sample_period);
ir_raw_event_store_with_filter(dev->rdev, &ev);
if (next_zero < size) {
@ -193,7 +193,7 @@ static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int
next_zero + 1);
ev.pulse = true;
ev.duration =
ITE_BITS_TO_NS(next_one - next_zero,
ITE_BITS_TO_US(next_one - next_zero,
sample_period);
ir_raw_event_store_with_filter
(dev->rdev, &ev);
@ -1555,9 +1555,9 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
rdev->timeout = IR_DEFAULT_TIMEOUT;
rdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
rdev->rx_resolution = ITE_BAUDRATE_DIVISOR *
itdev->params.sample_period;
itdev->params.sample_period / 1000;
rdev->tx_resolution = ITE_BAUDRATE_DIVISOR *
itdev->params.sample_period;
itdev->params.sample_period / 1000;
/* set up transmitter related values if needed */
if (itdev->params.hw_tx_capable) {

4
drivers/media/rc/ite-cir.h
View File

@ -146,8 +146,8 @@ struct ite_dev {
#define ITE_DEFAULT_CARRIER_FREQ 38000
/* convert bits to us */
#define ITE_BITS_TO_NS(bits, sample_period) \
((u32) ((bits) * ITE_BAUDRATE_DIVISOR * sample_period))
#define ITE_BITS_TO_US(bits, sample_period) \
((u32)((bits) * ITE_BAUDRATE_DIVISOR * (sample_period) / 1000))
/*
* n in RDCR produces a tolerance of +/- n * 6.25% around the center

37
drivers/media/rc/lirc_dev.c
View File

@ -67,17 +67,16 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
dev->gap = true;
dev->gap_duration = ev.duration;
sample = LIRC_TIMEOUT(ev.duration / 1000);
sample = LIRC_TIMEOUT(ev.duration);
dev_dbg(&dev->dev, "timeout report (duration: %d)\n", sample);
/* Normal sample */
} else {
if (dev->gap) {
dev->gap_duration += ktime_to_ns(ktime_sub(ktime_get(),
dev->gap_duration += ktime_to_us(ktime_sub(ktime_get(),
dev->gap_start));
/* Convert to ms and cap by LIRC_VALUE_MASK */
do_div(dev->gap_duration, 1000);
/* Cap by LIRC_VALUE_MASK */
dev->gap_duration = min_t(u64, dev->gap_duration,
LIRC_VALUE_MASK);
@ -89,10 +88,10 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
dev->gap = false;
}
sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) :
LIRC_SPACE(ev.duration / 1000);
sample = ev.pulse ? LIRC_PULSE(ev.duration) :
LIRC_SPACE(ev.duration);
dev_dbg(&dev->dev, "delivering %uus %s to lirc_dev\n",
TO_US(ev.duration), TO_STR(ev.pulse));
ev.duration, TO_STR(ev.pulse));
}
/*
@ -296,8 +295,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
}
for (i = 0; i < count; i++)
/* Convert from NS to US */
txbuf[i] = DIV_ROUND_UP(raw[i].duration, 1000);
txbuf[i] = raw[i].duration;
if (dev->s_tx_carrier) {
int carrier = ir_raw_encode_carrier(scan.rc_proto);
@ -325,7 +323,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
}
for (i = 0; i < count; i++) {
if (txbuf[i] > IR_MAX_DURATION / 1000 - duration || !txbuf[i]) {
if (txbuf[i] > IR_MAX_DURATION - duration || !txbuf[i]) {
ret = -EINVAL;
goto out_kfree;
}
@ -517,7 +515,7 @@ static long ir_lirc_ioctl(struct file *file, unsigned int cmd,
if (!dev->rx_resolution)
ret = -ENOTTY;
else
val = dev->rx_resolution / 1000;
val = dev->rx_resolution;
break;
case LIRC_SET_WIDEBAND_RECEIVER:
@ -539,31 +537,26 @@ static long ir_lirc_ioctl(struct file *file, unsigned int cmd,
if (!dev->max_timeout)
ret = -ENOTTY;
else
val = DIV_ROUND_UP(dev->min_timeout, 1000);
val = dev->min_timeout;
break;
case LIRC_GET_MAX_TIMEOUT:
if (!dev->max_timeout)
ret = -ENOTTY;
else
val = dev->max_timeout / 1000;
val = dev->max_timeout;
break;
case LIRC_SET_REC_TIMEOUT:
if (!dev->max_timeout) {
ret = -ENOTTY;
} else if (val > U32_MAX / 1000) {
/* Check for multiply overflow */
ret = -EINVAL;
} else {
u32 tmp = val * 1000;
if (tmp < dev->min_timeout || tmp > dev->max_timeout)
if (val < dev->min_timeout || val > dev->max_timeout)
ret = -EINVAL;
else if (dev->s_timeout)
ret = dev->s_timeout(dev, tmp);
ret = dev->s_timeout(dev, val);
else
dev->timeout = tmp;
dev->timeout = val;
}
break;
@ -571,7 +564,7 @@ static long ir_lirc_ioctl(struct file *file, unsigned int cmd,
if (!dev->timeout)
ret = -ENOTTY;
else
val = DIV_ROUND_UP(dev->timeout, 1000);
val = dev->timeout;
break;
case LIRC_SET_REC_TIMEOUT_REPORTS:

12
drivers/media/rc/mceusb.c
View File

@ -1070,7 +1070,7 @@ static int mceusb_set_timeout(struct rc_dev *dev, unsigned int timeout)
struct mceusb_dev *ir = dev->priv;
unsigned int units;
units = DIV_ROUND_CLOSEST(timeout, US_TO_NS(MCE_TIME_UNIT));
units = DIV_ROUND_CLOSEST(timeout, MCE_TIME_UNIT);
cmdbuf[2] = units >> 8;
cmdbuf[3] = units;
@ -1196,7 +1196,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, u8 *buf_in)
switch (subcmd) {
/* 2-byte return value commands */
case MCE_RSP_EQIRTIMEOUT:
ir->rc->timeout = US_TO_NS((*hi << 8 | *lo) * MCE_TIME_UNIT);
ir->rc->timeout = (*hi << 8 | *lo) * MCE_TIME_UNIT;
break;
case MCE_RSP_EQIRNUMPORTS:
ir->num_txports = *hi;
@ -1291,9 +1291,9 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
ir->pulse_tunit += rawir.duration;
ir->pulse_count++;
}
rawir.duration *= US_TO_NS(MCE_TIME_UNIT);
rawir.duration *= MCE_TIME_UNIT;
dev_dbg(ir->dev, "Storing %s %u ns (%02x)",
dev_dbg(ir->dev, "Storing %s %u us (%02x)",
rawir.pulse ? "pulse" : "space",
rawir.duration, ir->buf_in[i]);
@ -1605,8 +1605,8 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
rc->dev.parent = dev;
rc->priv = ir;
rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
rc->min_timeout = US_TO_NS(MCE_TIME_UNIT);
rc->timeout = MS_TO_NS(100);
rc->min_timeout = MCE_TIME_UNIT;
rc->timeout = MS_TO_US(100);
if (!mceusb_model[ir->model].broken_irtimeout) {
rc->s_timeout = mceusb_set_timeout;
rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;

4
drivers/media/rc/meson-ir.c
View File

@ -86,7 +86,7 @@ static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
duration = readl_relaxed(ir->reg + IR_DEC_REG1);
duration = FIELD_GET(REG1_TIME_IV_MASK, duration);
rawir.duration = US_TO_NS(duration * MESON_TRATE);
rawir.duration = duration * MESON_TRATE;
status = readl_relaxed(ir->reg + IR_DEC_STATUS);
rawir.pulse = !!(status & STATUS_IR_DEC_IN);
@ -133,7 +133,7 @@ static int meson_ir_probe(struct platform_device *pdev)
map_name = of_get_property(node, "linux,rc-map-name", NULL);
ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY;
ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
ir->rc->rx_resolution = US_TO_NS(MESON_TRATE);
ir->rc->rx_resolution = MESON_TRATE;
ir->rc->min_timeout = 1;
ir->rc->timeout = IR_DEFAULT_TIMEOUT;
ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;

4
drivers/media/rc/mtk-cir.c
View File

@ -52,8 +52,8 @@
#define MTK_IR_END(v, p) ((v) == MTK_MAX_SAMPLES && (p) == 0)
/* Number of registers to record the pulse width */
#define MTK_CHKDATA_SZ 17
/* Sample period in ns */
#define MTK_IR_SAMPLE 46000
/* Sample period in us */
#define MTK_IR_SAMPLE 46
enum mtk_fields {
/* Register to setting software sampling period */

10
drivers/media/rc/nuvoton-cir.c
View File

@ -653,8 +653,7 @@ static int nvt_ir_raw_set_wakeup_filter(struct rc_dev *dev,
/* Inspect the ir samples */
for (i = 0, count = 0; i < ret && count < WAKEUP_MAX_SIZE; ++i) {
/* NS to US */
val = DIV_ROUND_UP(raw[i].duration, 1000L) / SAMPLE_PERIOD;
val = raw[i].duration / SAMPLE_PERIOD;
/* Split too large values into several smaller ones */
while (val > 0 && count < WAKEUP_MAX_SIZE) {
@ -721,8 +720,7 @@ static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
sample = nvt->buf[i];
rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
rawir.duration = US_TO_NS((sample & BUF_LEN_MASK)
* SAMPLE_PERIOD);
rawir.duration = (sample & BUF_LEN_MASK) * SAMPLE_PERIOD;
nvt_dbg("Storing %s with duration %d",
rawir.pulse ? "pulse" : "space", rawir.duration);
@ -1000,9 +998,9 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
rdev->input_id.version = nvt->chip_minor;
rdev->driver_name = NVT_DRIVER_NAME;
rdev->map_name = RC_MAP_RC6_MCE;
rdev->timeout = MS_TO_NS(100);
rdev->timeout = MS_TO_US(100);
/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
rdev->rx_resolution = CIR_SAMPLE_PERIOD;
#if 0
rdev->min_timeout = XYZ;
rdev->max_timeout = XYZ;

2
drivers/media/rc/nuvoton-cir.h
View File

@ -94,7 +94,7 @@ struct nvt_dev {
#define CIR_IOREG_LENGTH 0x0f
/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL */
#define CIR_RX_LIMIT_COUNT (IR_DEFAULT_TIMEOUT / US_TO_NS(SAMPLE_PERIOD))
#define CIR_RX_LIMIT_COUNT (IR_DEFAULT_TIMEOUT / SAMPLE_PERIOD)
/* CIR Regs */
#define CIR_IRCON 0x00

1
drivers/media/rc/rc-core-priv.h
View File

@ -193,7 +193,6 @@ static inline bool is_timing_event(struct ir_raw_event ev)
return !ev.carrier_report && !ev.reset;
}
#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000)
#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
/* functions for IR encoders */

14
drivers/media/rc/rc-ir-raw.c
View File

@ -77,7 +77,7 @@ int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev)
return -EINVAL;
dev_dbg(&dev->dev, "sample: (%05dus %s)\n",
TO_US(ev->duration), TO_STR(ev->pulse));
ev->duration, TO_STR(ev->pulse));
if (!kfifo_put(&dev->raw->kfifo, *ev)) {
dev_err(&dev->dev, "IR event FIFO is full!\n");
@ -108,7 +108,7 @@ int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse)
return -EINVAL;
now = ktime_get();
ev.duration = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
ev.duration = ktime_to_us(ktime_sub(now, dev->raw->last_event));
ev.pulse = !pulse;
return ir_raw_event_store_with_timeout(dev, &ev);
@ -275,7 +275,7 @@ static int change_protocol(struct rc_dev *dev, u64 *rc_proto)
if (timeout == 0)
timeout = IR_DEFAULT_TIMEOUT;
else
timeout += MS_TO_NS(10);
timeout += MS_TO_US(10);
if (timeout < dev->min_timeout)
timeout = dev->min_timeout;
@ -561,17 +561,17 @@ static void ir_raw_edge_handle(struct timer_list *t)
spin_lock_irqsave(&dev->raw->edge_spinlock, flags);
interval = ktime_sub(ktime_get(), dev->raw->last_event);
if (ktime_to_ns(interval) >= dev->timeout) {
if (ktime_to_us(interval) >= dev->timeout) {
struct ir_raw_event ev = {
.timeout = true,
.duration = ktime_to_ns(interval)
.duration = ktime_to_us(interval)
};
ir_raw_event_store(dev, &ev);
} else {
mod_timer(&dev->raw->edge_handle,
jiffies + nsecs_to_jiffies(dev->timeout -
ktime_to_ns(interval)));
jiffies + usecs_to_jiffies(dev->timeout -
ktime_to_us(interval)));
}
spin_unlock_irqrestore(&dev->raw->edge_spinlock, flags);

8
drivers/media/rc/rc-loopback.c
View File

@ -113,7 +113,7 @@ static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
for (i = 0; i < count; i++) {
rawir.pulse = i % 2 ? false : true;
rawir.duration = txbuf[i] * 1000;
rawir.duration = txbuf[i];
if (rawir.duration)
ir_raw_event_store_with_filter(dev, &rawir);
}
@ -219,11 +219,11 @@ static int __init loop_init(void)
rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
rc->allowed_wakeup_protocols = RC_PROTO_BIT_ALL_IR_ENCODER;
rc->encode_wakeup = true;
rc->timeout = 100 * 1000 * 1000; /* 100 ms */
rc->timeout = MS_TO_US(100); /* 100 ms */
rc->min_timeout = 1;
rc->max_timeout = UINT_MAX;
rc->rx_resolution = 1000;
rc->tx_resolution = 1000;
rc->rx_resolution = 1;
rc->tx_resolution = 1;
rc->s_tx_mask = loop_set_tx_mask;
rc->s_tx_carrier = loop_set_tx_carrier;
rc->s_tx_duty_cycle = loop_set_tx_duty_cycle;

17
drivers/media/rc/redrat3.c
View File

@ -340,7 +340,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
{
struct ir_raw_event rawir = {};
struct device *dev;
unsigned int i, sig_size, single_len, offset, val;
unsigned int i, sig_size, offset, val;
u32 mod_freq;
dev = rr3->dev;
@ -361,7 +361,6 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
for (i = 0; i < sig_size; i++) {
offset = rr3->irdata.sigdata[i];
val = get_unaligned_be16(&rr3->irdata.lens[offset]);
single_len = redrat3_len_to_us(val);
/* we should always get pulse/space/pulse/space samples */
if (i % 2)
@ -369,7 +368,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
else
rawir.pulse = true;
rawir.duration = US_TO_NS(single_len);
rawir.duration = redrat3_len_to_us(val);
/* cap the value to IR_MAX_DURATION */
rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
IR_MAX_DURATION : rawir.duration;
@ -495,7 +494,7 @@ static u32 redrat3_get_timeout(struct redrat3_dev *rr3)
return timeout;
}
static int redrat3_set_timeout(struct rc_dev *rc_dev, unsigned int timeoutns)
static int redrat3_set_timeout(struct rc_dev *rc_dev, unsigned int timeoutus)
{
struct redrat3_dev *rr3 = rc_dev->priv;
struct usb_device *udev = rr3->udev;
@ -507,7 +506,7 @@ static int redrat3_set_timeout(struct rc_dev *rc_dev, unsigned int timeoutns)
if (!timeout)
return -ENOMEM;
*timeout = cpu_to_be32(redrat3_us_to_len(timeoutns / 1000));
*timeout = cpu_to_be32(redrat3_us_to_len(timeoutus));
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout),
@ -947,15 +946,15 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
rc->dev.parent = dev;
rc->priv = rr3;
rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
rc->min_timeout = MS_TO_NS(RR3_RX_MIN_TIMEOUT);
rc->max_timeout = MS_TO_NS(RR3_RX_MAX_TIMEOUT);
rc->timeout = US_TO_NS(redrat3_get_timeout(rr3));
rc->min_timeout = MS_TO_US(RR3_RX_MIN_TIMEOUT);
rc->max_timeout = MS_TO_US(RR3_RX_MAX_TIMEOUT);
rc->timeout = redrat3_get_timeout(rr3);
rc->s_timeout = redrat3_set_timeout;
rc->tx_ir = redrat3_transmit_ir;
rc->s_tx_carrier = redrat3_set_tx_carrier;
rc->s_carrier_report = redrat3_wideband_receiver;
rc->driver_name = DRIVER_NAME;
rc->rx_resolution = US_TO_NS(2);
rc->rx_resolution = 2;
rc->map_name = RC_MAP_HAUPPAUGE;
ret = rc_register_device(rc);

10
drivers/media/rc/serial_ir.c
View File

@ -269,7 +269,7 @@ static void frbwrite(unsigned int l, bool is_pulse)
if (ptr > 0 && is_pulse) {
pulse += l;
if (pulse > 250000) {
if (pulse > 250) {
ev.duration = space;
ev.pulse = false;
ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
@ -283,13 +283,13 @@ static void frbwrite(unsigned int l, bool is_pulse)
}
if (!is_pulse) {
if (ptr == 0) {
if (l > 20000000) {
if (l > 20000) {
space = l;
ptr++;
return;
}
} else {
if (l > 20000000) {
if (l > 20000) {
space += pulse;
if (space > IR_MAX_DURATION)
space = IR_MAX_DURATION;
@ -376,7 +376,7 @@ static irqreturn_t serial_ir_irq_handler(int i, void *blah)
sense = sense ? 0 : 1;
}
} else {
data = ktime_to_ns(delkt);
data = ktime_to_us(delkt);
}
frbwrite(data, !(dcd ^ sense));
serial_ir.lastkt = kt;
@ -528,7 +528,7 @@ static int serial_ir_probe(struct platform_device *dev)
rcdev->min_timeout = 1;
rcdev->timeout = IR_DEFAULT_TIMEOUT;
rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
rcdev->rx_resolution = 250000;
rcdev->rx_resolution = 250;
serial_ir.rcdev = rcdev;

2
drivers/media/rc/sir_ir.c
View File

@ -110,7 +110,7 @@ static void add_read_queue(int flag, unsigned long val)
} else {
val += TIME_CONST / 2;
}
ev.duration = US_TO_NS(val);
ev.duration = val;
ir_raw_event_store_with_filter(rcdev, &ev);
}

6
drivers/media/rc/st_rc.c
View File

@ -134,12 +134,12 @@ static irqreturn_t st_rc_rx_interrupt(int irq, void *data)
mark /= dev->sample_div;
}
ev.duration = US_TO_NS(mark);
ev.duration = mark;
ev.pulse = true;
ir_raw_event_store(dev->rdev, &ev);
if (!last_symbol) {
ev.duration = US_TO_NS(symbol);
ev.duration = symbol;
ev.pulse = false;
ir_raw_event_store(dev->rdev, &ev);
} else {
@ -292,7 +292,7 @@ static int st_rc_probe(struct platform_device *pdev)
rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
/* rx sampling rate is 10Mhz */
rdev->rx_resolution = 100;
rdev->timeout = US_TO_NS(MAX_SYMB_TIME);
rdev->timeout = MAX_SYMB_TIME;
rdev->priv = rc_dev;
rdev->open = st_rc_open;
rdev->close = st_rc_close;

10
drivers/media/rc/streamzap.c
View File

@ -137,7 +137,6 @@ static void sz_push_full_pulse(struct streamzap_ir *sz,
} else {
rawir.duration = delta;
rawir.duration -= sz->sum;
rawir.duration = US_TO_NS(rawir.duration);
rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
IR_MAX_DURATION : rawir.duration;
}
@ -151,7 +150,6 @@ static void sz_push_full_pulse(struct streamzap_ir *sz,
rawir.duration = ((int) value) * SZ_RESOLUTION;
rawir.duration += SZ_RESOLUTION / 2;
sz->sum += rawir.duration;
rawir.duration = US_TO_NS(rawir.duration);
rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
IR_MAX_DURATION : rawir.duration;
sz_push(sz, rawir);
@ -172,7 +170,6 @@ static void sz_push_full_space(struct streamzap_ir *sz,
rawir.duration = ((int) value) * SZ_RESOLUTION;
rawir.duration += SZ_RESOLUTION / 2;
sz->sum += rawir.duration;
rawir.duration = US_TO_NS(rawir.duration);
sz_push(sz, rawir);
}
@ -403,13 +400,12 @@ static int streamzap_probe(struct usb_interface *intf,
sz->decoder_state = PulseSpace;
/* FIXME: don't yet have a way to set this */
sz->timeout_enabled = true;
sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) &
IR_MAX_DURATION) | 0x03000000);
sz->rdev->timeout = SZ_TIMEOUT * SZ_RESOLUTION;
#if 0
/* not yet supported, depends on patches from maxim */
/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION;
sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION;
#endif
sz->signal_start = ktime_get_real();

4
drivers/media/rc/sunxi-cir.c
View File

@ -241,8 +241,8 @@ static int sunxi_ir_probe(struct platform_device *pdev)
ir->rc->dev.parent = dev;
ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
/* Frequency after IR internal divider with sample period in ns */
ir->rc->rx_resolution = (1000000000ul / (b_clk_freq / 64));
ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
ir->rc->rx_resolution = (USEC_PER_SEC / (b_clk_freq / 64));
ir->rc->timeout = MS_TO_US(SUNXI_IR_TIMEOUT);
ir->rc->driver_name = SUNXI_IR_DEV;
ret = rc_register_device(ir->rc);

18
drivers/media/rc/ttusbir.c
View File

@ -20,8 +20,8 @@
* messages per second (!), whether IR is idle or not.
*/
#define NUM_URBS 4
#define NS_PER_BYTE 62500
#define NS_PER_BIT (NS_PER_BYTE/8)
#define US_PER_BYTE 62
#define US_PER_BIT (US_PER_BYTE / 8)
struct ttusbir {
struct rc_dev *rc;
@ -117,13 +117,13 @@ static void ttusbir_process_ir_data(struct ttusbir *tt, uint8_t *buf)
switch (v) {
case 0xfe:
rawir.pulse = false;
rawir.duration = NS_PER_BYTE;
rawir.duration = US_PER_BYTE;
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
event = true;
break;
case 0:
rawir.pulse = true;
rawir.duration = NS_PER_BYTE;
rawir.duration = US_PER_BYTE;
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
event = true;
break;
@ -137,12 +137,12 @@ static void ttusbir_process_ir_data(struct ttusbir *tt, uint8_t *buf)
rawir.pulse = false;
}
rawir.duration = NS_PER_BIT * (8 - b);
rawir.duration = US_PER_BIT * (8 - b);
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
event = true;
rawir.pulse = !rawir.pulse;
rawir.duration = NS_PER_BIT * b;
rawir.duration = US_PER_BIT * b;
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
event = true;
break;
@ -311,10 +311,10 @@ static int ttusbir_probe(struct usb_interface *intf,
rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
/*
* The precision is NS_PER_BIT, but since every 8th bit can be
* overwritten with garbage the accuracy is at best 2 * NS_PER_BIT.
* The precision is US_PER_BIT, but since every 8th bit can be
* overwritten with garbage the accuracy is at best 2 * US_PER_BIT.
*/
rc->rx_resolution = NS_PER_BIT;
rc->rx_resolution = 2 * US_PER_BIT;
ret = rc_register_device(rc);
if (ret) {

10
drivers/media/rc/winbond-cir.c
View File

@ -354,7 +354,6 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device)
{
u8 irdata;
struct ir_raw_event rawir = {};
unsigned duration;
/* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL) {
@ -362,13 +361,12 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device)
if (data->rxstate == WBCIR_RXSTATE_ERROR)
continue;
duration = ((irdata & 0x7F) + 1) *
rawir.duration = ((irdata & 0x7F) + 1) *
(data->carrier_report_enabled ? 2 : 10);
rawir.pulse = irdata & 0x80 ? false : true;
rawir.duration = US_TO_NS(duration);
if (rawir.pulse)
data->pulse_duration += duration;
data->pulse_duration += rawir.duration;
ir_raw_event_store_with_filter(data->dev, &rawir);
}
@ -519,7 +517,7 @@ wbcir_set_carrier_report(struct rc_dev *dev, int enable)
/* Set a higher sampling resolution if carrier reports are enabled */
wbcir_select_bank(data, WBCIR_BANK_2);
data->dev->rx_resolution = US_TO_NS(enable ? 2 : 10);
data->dev->rx_resolution = enable ? 2 : 10;
outb(enable ? 0x03 : 0x0f, data->sbase + WBCIR_REG_SP3_BGDL);
outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
@ -1076,7 +1074,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
data->dev->min_timeout = 1;
data->dev->timeout = IR_DEFAULT_TIMEOUT;
data->dev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
data->dev->rx_resolution = US_TO_NS(2);
data->dev->rx_resolution = 2;
data->dev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
data->dev->allowed_wakeup_protocols = RC_PROTO_BIT_NEC |
RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32 | RC_PROTO_BIT_RC5 |

2
drivers/media/rc/xbox_remote.c
View File

@ -157,7 +157,7 @@ static void xbox_remote_rc_init(struct xbox_remote *xbox_remote)
rdev->device_name = xbox_remote->rc_name;
rdev->input_phys = xbox_remote->rc_phys;
rdev->timeout = MS_TO_NS(10);
rdev->timeout = MS_TO_US(10);
usb_to_input_id(xbox_remote->udev, &rdev->input_id);
rdev->dev.parent = &xbox_remote->interface->dev;

8
drivers/media/usb/au0828/au0828-input.c
View File

@ -104,11 +104,11 @@ static int au8522_rc_andor(struct au0828_rc *ir, u16 reg, u8 mask, u8 value)
/* Remote Controller time units */
#define AU8522_UNIT 200000 /* ns */
#define NEC_START_SPACE (4500000 / AU8522_UNIT)
#define NEC_START_PULSE (562500 * 16)
#define AU8522_UNIT 200 /* us */
#define NEC_START_SPACE (4500 / AU8522_UNIT)
#define NEC_START_PULSE (563 * 16)
#define RC5_START_SPACE (4 * AU8522_UNIT)
#define RC5_START_PULSE 888888
#define RC5_START_PULSE 889
static int au0828_get_key_au8522(struct au0828_rc *ir)
{

4
drivers/media/usb/dvb-usb-v2/rtl28xxu.c
View File

@ -1781,7 +1781,7 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
/* pass data to Kernel IR decoder */
for (i = 0; i < len; i++) {
ev.pulse = buf[i] >> 7;
ev.duration = 50800 * (buf[i] & 0x7f);
ev.duration = 51 * (buf[i] & 0x7f);
ir_raw_event_store_with_filter(d->rc_dev, &ev);
}
@ -1809,7 +1809,7 @@ static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
rc->query = rtl2832u_rc_query;
rc->interval = 200;
/* we program idle len to 0xc0, set timeout to one less */
rc->timeout = 0xbf * 50800;
rc->timeout = 0xbf * 51;
return 0;
}

4
drivers/media/usb/dvb-usb/technisat-usb2.c
View File

@ -656,14 +656,14 @@ unlock:
for (i = 1; i < ARRAY_SIZE(state->buf); i++) {
if (buf[i] == 0xff) {
ev.pulse = 0;
ev.duration = 888888*2;
ev.duration = 889 * 2;
ir_raw_event_store(d->rc_dev, &ev);
break;
}
ev.pulse = !ev.pulse;
ev.duration = (buf[i] * FIRMWARE_CLOCK_DIVISOR *
FIRMWARE_CLOCK_TICK) / 1000;
FIRMWARE_CLOCK_TICK) / (1000 * 1000);
ir_raw_event_store(d->rc_dev, &ev);
}

11
include/media/rc-core.h
View File

@ -128,8 +128,8 @@ struct lirc_fh {
* @timeout: optional time after which device stops sending data
* @min_timeout: minimum timeout supported by device
* @max_timeout: maximum timeout supported by device
* @rx_resolution : resolution (in ns) of input sampler
* @tx_resolution: resolution (in ns) of output sampler
* @rx_resolution : resolution (in us) of input sampler
* @tx_resolution: resolution (in us) of output sampler
* @lirc_dev: lirc device
* @lirc_cdev: lirc char cdev
* @gap_start: time when gap starts
@ -157,7 +157,7 @@ struct lirc_fh {
* @s_wakeup_filter: set the wakeup scancode filter. If the mask is zero
* then wakeup should be disabled. wakeup_protocol will be set to
* a valid protocol if mask is nonzero.
* @s_timeout: set hardware timeout in ns
* @s_timeout: set hardware timeout in us
*/
struct rc_dev {
struct device dev;
@ -309,11 +309,10 @@ struct ir_raw_event {
unsigned carrier_report:1;
};
#define IR_DEFAULT_TIMEOUT MS_TO_NS(125)
#define IR_MAX_DURATION 500000000 /* 500 ms */
#define US_TO_NS(usec) ((usec) * 1000)
#define MS_TO_US(msec) ((msec) * 1000)
#define MS_TO_NS(msec) ((msec) * 1000 * 1000)
#define IR_MAX_DURATION MS_TO_US(500)
#define IR_DEFAULT_TIMEOUT MS_TO_US(125)
void ir_raw_event_handle(struct rc_dev *dev);
int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);