drm/i915/chv: calculate rc6 residency correctly

The register to read cz count is different from vlv. Also
the counts returned from CCK_CTL1 for BSW are (ticks in 30ns - 1).
czcount_30ns of value 1 is a special case for 320Mhz.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80703
Suggested-by: Deepak S <deepak.s@linux.intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Tested-by: Guo Jinxian <jinxianx.guo@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Mika Kuoppala 2014-07-09 14:55:56 +03:00 committed by Daniel Vetter
parent d4ef41ce15
commit 542a6b205b
2 changed files with 32 additions and 9 deletions

View file

@ -2281,7 +2281,7 @@ enum punit_power_well {
/* Same as Haswell, but 72064 bytes now. */
#define GEN8_CXT_TOTAL_SIZE (18 * PAGE_SIZE)
#define CHV_CLK_CTL1 0x101100
#define VLV_CLK_CTL2 0x101104
#define CLK_CTL2_CZCOUNT_30NS_SHIFT 28

View file

@ -47,22 +47,45 @@ static u32 calc_residency(struct drm_device *dev, const u32 reg)
intel_runtime_pm_get(dev_priv);
/* On VLV, residency time is in CZ units rather than 1.28us */
/* On VLV and CHV, residency time is in CZ units rather than 1.28us */
if (IS_VALLEYVIEW(dev)) {
u32 clkctl2;
u32 reg, czcount_30ns;
clkctl2 = I915_READ(VLV_CLK_CTL2) >>
CLK_CTL2_CZCOUNT_30NS_SHIFT;
if (!clkctl2) {
WARN(!clkctl2, "bogus CZ count value");
if (IS_CHERRYVIEW(dev))
reg = CHV_CLK_CTL1;
else
reg = VLV_CLK_CTL2;
czcount_30ns = I915_READ(reg) >> CLK_CTL2_CZCOUNT_30NS_SHIFT;
if (!czcount_30ns) {
WARN(!czcount_30ns, "bogus CZ count value");
ret = 0;
goto out;
}
units = DIV_ROUND_UP_ULL(30ULL * bias, (u64)clkctl2);
units = 0;
div = 1000000ULL;
if (IS_CHERRYVIEW(dev)) {
/* Special case for 320Mhz */
if (czcount_30ns == 1) {
div = 10000000ULL;
units = 3125ULL;
} else {
/* chv counts are one less */
czcount_30ns += 1;
}
}
if (units == 0)
units = DIV_ROUND_UP_ULL(30ULL * bias,
(u64)czcount_30ns);
if (I915_READ(VLV_COUNTER_CONTROL) & VLV_COUNT_RANGE_HIGH)
units <<= 8;
div = 1000000ULL * bias;
div = div * bias;
}
raw_time = I915_READ(reg) * units;