diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 4a99c9255104..48c3cf427610 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1611,10 +1611,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -1626,10 +1627,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -1640,7 +1642,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -1656,10 +1658,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&funnel_out>; }; }; @@ -1673,7 +1676,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -1687,33 +1690,31 @@ port@0 { reg = <0>; funnel_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@4 { reg = <4>; funnel_in4: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@5 { reg = <5>; funnel_in5: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel_out: endpoint { remote-endpoint = <&replicator_in>; }; @@ -1730,9 +1731,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; }; }; }; @@ -1746,9 +1749,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; }; }; }; @@ -1762,9 +1767,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel_in4>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; }; }; }; @@ -1778,9 +1785,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel_in5>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 78db67337ed4..2d56008d8d6b 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -52,78 +52,85 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; reg = <0x0>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 716000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-48000000 { + opp-hz = /bits/ 64 <48000000>; + clock-latency-ns = <256000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <256000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <256000>; + }; + opp-716000000 { + opp-hz = /bits/ 64 <716000000>; + clock-latency-ns = <256000>; + }; }; pmu { @@ -291,49 +298,49 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; + }; - acc1: clock-controller@b098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; + }; - acc2: clock-controller@b0a8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; + }; - acc3: clock-controller@b0b8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; + }; - saw0: regulator@b089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; + saw0: regulator@b089000 { + compatible = "qcom,saw2"; + reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; regulator; - }; + }; - saw1: regulator@b099000 { - compatible = "qcom,saw2"; - reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw1: regulator@b099000 { + compatible = "qcom,saw2"; + reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw2: regulator@b0a9000 { - compatible = "qcom,saw2"; - reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw2: regulator@b0a9000 { + compatible = "qcom,saw2"; + reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw3: regulator@b0b9000 { - compatible = "qcom,saw2"; - reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw3: regulator@b0b9000 { + compatible = "qcom,saw2"; + reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; @@ -387,7 +394,7 @@ #size-cells = <2>; ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 - 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; + 0x82000000 0 0x40300000 0x40300000 0 0x400000>; interrupts = ; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index bcf53e37ed93..554c65e7aa0e 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -2,26 +2,8 @@ #include "qcom-ipq8064-v1.0.dtsi" / { - model = "Qualcomm IPQ8064/AP148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - - aliases { - serial0 = &gsbi4_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; + model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; + compatible = "qcom,ipq8064-ap148"; soc { pinmux@800000 { @@ -31,73 +13,22 @@ bias-disable; }; - spi_pins: spi_pins { + buttons_pins: buttons_pins { mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; + pins = "gpio54", "gpio65"; + drive-strength = <2>; + bias-pull-up; }; }; }; gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { + i2c@16380000 { status = "ok"; - }; - - i2c4: i2c@16380000 { - status = "ok"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c4_pins>; pinctrl-names = "default"; }; }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partition@0 { - label = "rootfs"; - reg = <0x0 0x1000000>; - }; - - partition@1 { - label = "scratch"; - reg = <0x1000000 0x1000000>; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - ports-implemented = <0x1>; - status = "ok"; - }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index e1181194e8d3..e239a0486936 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -1,2 +1,127 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" +#include + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + + serial@16340000 { + status = "ok"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "ok"; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + button@2 { + label = "wps"; + linux,code = ; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@7 { + label = "led_usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@8 { + label = "led_usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@9 { + label = "status_led_fail"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@26 { + label = "sata_led"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@53 { + label = "status_led_pass"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 70790ac242d1..f793cd1ad6d0 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -2,8 +2,11 @@ /dts-v1/; #include "skeleton.dtsi" +#include #include #include +#include +#include #include #include @@ -114,6 +117,61 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = ; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; intc: interrupt-controller@2000000 { @@ -373,5 +431,233 @@ #reset-cells = <1>; }; + pcie0: pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + }; + + pcie1: pci@1b700000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + }; + + pcie2: pci@1b900000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = ; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = ; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + #mmc-ddr-1_8v; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index c2dc9d09484a..ed8f064d0895 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -241,6 +241,33 @@ bias-pull-up; }; }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + }; + + mpu6515_pin: mpu6515 { + irq { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; + }; }; sdhci@f9824900 { @@ -277,6 +304,62 @@ linux,code = ; }; }; + + i2c@f9968000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + // Currently only works in polling mode. + // gpios = <&msmgpio 61 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; + }; + + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; + }; + }; + }; + }; + + i2c@f9925000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d9019a49b292..aba159d5a95a 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -67,7 +67,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - interrupts = <1 9 0xf04>; + interrupts = ; CPU0: cpu@0 { compatible = "qcom,krait"; @@ -214,7 +214,7 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 7 0xf04>; + interrupts = ; }; clocks { @@ -233,17 +233,17 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = , + , + , + ; clock-frequency = <19200000>; }; adsp-pil { compatible = "qcom,msm8974-adsp-pil"; - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -275,7 +275,7 @@ qcom,smem = <443>, <429>; interrupt-parent = <&intc>; - interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + interrupts = ; qcom,ipc = <&apcs 8 10>; @@ -300,7 +300,7 @@ qcom,smem = <435>, <428>; interrupt-parent = <&intc>; - interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; + interrupts = ; qcom,ipc = <&apcs 8 14>; @@ -325,7 +325,7 @@ qcom,smem = <451>, <431>; interrupt-parent = <&intc>; - interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + interrupts = ; qcom,ipc = <&apcs 8 18>; @@ -364,7 +364,7 @@ modem_smsm: modem@1 { reg = <1>; - interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + interrupts = ; interrupt-controller; #interrupt-cells = <2>; @@ -372,7 +372,7 @@ adsp_smsm: adsp@2 { reg = <2>; - interrupts = <0 157 IRQ_TYPE_EDGE_RISING>; + interrupts = ; interrupt-controller; #interrupt-cells = <2>; @@ -380,7 +380,7 @@ wcnss_smsm: wcnss@7 { reg = <7>; - interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + interrupts = ; interrupt-controller; #interrupt-cells = <2>; @@ -445,50 +445,50 @@ frame@f9021000 { frame-number = <0>; - interrupts = <0 8 0x4>, - <0 7 0x4>; + interrupts = , + ; reg = <0xf9021000 0x1000>, <0xf9022000 0x1000>; }; frame@f9023000 { frame-number = <1>; - interrupts = <0 9 0x4>; + interrupts = ; reg = <0xf9023000 0x1000>; status = "disabled"; }; frame@f9024000 { frame-number = <2>; - interrupts = <0 10 0x4>; + interrupts = ; reg = <0xf9024000 0x1000>; status = "disabled"; }; frame@f9025000 { frame-number = <3>; - interrupts = <0 11 0x4>; + interrupts = ; reg = <0xf9025000 0x1000>; status = "disabled"; }; frame@f9026000 { frame-number = <4>; - interrupts = <0 12 0x4>; + interrupts = ; reg = <0xf9026000 0x1000>; status = "disabled"; }; frame@f9027000 { frame-number = <5>; - interrupts = <0 13 0x4>; + interrupts = ; reg = <0xf9027000 0x1000>; status = "disabled"; }; frame@f9028000 { frame-number = <6>; - interrupts = <0 14 0x4>; + interrupts = ; reg = <0xf9028000 0x1000>; status = "disabled"; }; @@ -586,7 +586,7 @@ blsp1_uart1: serial@f991d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991d000 0x1000>; - interrupts = <0 107 0x0>; + interrupts = ; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -595,7 +595,7 @@ blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; - interrupts = <0 108 0x0>; + interrupts = ; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -605,7 +605,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = , + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -618,8 +619,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = , - ; + interrupts = , + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC3_APPS_CLK>, <&gcc GCC_SDCC3_AHB_CLK>, @@ -632,7 +633,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = , + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -699,25 +701,36 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = ; }; i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9924000 0x1000>; - interrupts = <0 96 IRQ_TYPE_NONE>; + interrupts = ; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; }; + blsp_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9964000 0x1000>; - interrupts = <0 102 IRQ_TYPE_NONE>; + interrupts = ; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -728,7 +741,7 @@ status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9967000 0x1000>; - interrupts = <0 105 IRQ_TYPE_NONE>; + interrupts = ; clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -737,6 +750,17 @@ dma-names = "tx", "rx"; }; + blsp_i2c12: i2c@f9968000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + spmi_bus: spmi@fc4cf000 { compatible = "qcom,spmi-pmic-arb"; reg-names = "core", "intr", "cnfg"; @@ -744,7 +768,7 @@ <0xfc4cb000 0x1000>, <0xfc4ca000 0x1000>; interrupt-names = "periph_irq"; - interrupts = <0 190 0>; + interrupts = ; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -770,10 +794,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -785,10 +810,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -800,7 +826,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -816,10 +842,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; @@ -833,20 +860,17 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; - port@1 { - reg = <0>; + }; + + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&merger_out>; }; }; @@ -860,7 +884,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -873,12 +897,13 @@ port@1 { reg = <1>; merger_in1: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { merger_out: endpoint { remote-endpoint = <&etf_in>; }; @@ -893,7 +918,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -910,12 +935,13 @@ port@5 { reg = <5>; funnel1_in5: endpoint { - slave-mode; remote-endpoint = <&kpss_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel1_out: endpoint { remote-endpoint = <&merger_in1>; }; @@ -930,40 +956,38 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; kpss_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; kpss_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; kpss_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; kpss_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { kpss_out: endpoint { remote-endpoint = <&funnel1_in5>; }; @@ -980,9 +1004,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&kpss_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; }; }; }; @@ -996,9 +1022,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&kpss_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; }; }; }; @@ -1012,9 +1040,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&kpss_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; }; }; }; @@ -1028,9 +1058,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&kpss_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; }; }; }; @@ -1040,21 +1072,21 @@ compatible = "qcom,smd"; adsp { - interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + interrupts = ; qcom,ipc = <&apcs 8 8>; qcom,smd-edge = <1>; }; modem { - interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + interrupts = ; qcom,ipc = <&apcs 8 12>; qcom,smd-edge = <0>; }; rpm { - interrupts = <0 168 1>; + interrupts = ; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>;