From 7352e72a513fd2757b2fda695a349d86faa4c94e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 8 Aug 2019 13:33:35 +0300 Subject: [PATCH 1/3] regulator: slg51000: Fix a couple NULL vs IS_ERR() checks The devm_gpiod_get_from_of_node() function never returns NULL, it returns error pointers on error. Fixes: a867bde3dd03 ("regulator: slg51000: add slg51000 regulator driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20190808103335.GD30506@mwanda Signed-off-by: Mark Brown --- drivers/regulator/slg51000-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c index 04b732991d69..4d859fef55e6 100644 --- a/drivers/regulator/slg51000-regulator.c +++ b/drivers/regulator/slg51000-regulator.c @@ -205,7 +205,7 @@ static int slg51000_of_parse_cb(struct device_node *np, ena_gpiod = devm_gpiod_get_from_of_node(chip->dev, np, "enable-gpios", 0, gflags, "gpio-en-ldo"); - if (ena_gpiod) { + if (!IS_ERR(ena_gpiod)) { config->ena_gpiod = ena_gpiod; devm_gpiod_unhinge(chip->dev, config->ena_gpiod); } @@ -459,7 +459,7 @@ static int slg51000_i2c_probe(struct i2c_client *client, GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE, "slg51000-cs"); - if (cs_gpiod) { + if (!IS_ERR(cs_gpiod)) { dev_info(dev, "Found chip selector property\n"); chip->cs_gpiod = cs_gpiod; } From 5d2fc542e8c92130b55ddeb81876ec398adf4d13 Mon Sep 17 00:00:00 2001 From: Raag Jadav Date: Tue, 13 Aug 2019 00:09:54 +0530 Subject: [PATCH 2/3] regulator: act8945a-regulator: fix ldo register addresses in set_mode hook According to ACT8945A datasheet[1], operating modes for ldos are controlled by BIT(5) of their respective _CTRL registers. [1] https://active-semi.com/wp-content/uploads/ACT8945A_Datasheet.pdf Fixes: 7482d6ecc68e ("regulator: act8945a-regulator: Implement PM functionalities") Signed-off-by: Raag Jadav Link: https://lore.kernel.org/r/1565635194-5816-1-git-send-email-raagjadav@gmail.com Signed-off-by: Mark Brown --- drivers/regulator/act8945a-regulator.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c index 584284938ac9..d2f804dbc785 100644 --- a/drivers/regulator/act8945a-regulator.c +++ b/drivers/regulator/act8945a-regulator.c @@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) reg = ACT8945A_DCDC3_CTRL; break; case ACT8945A_ID_LDO1: - reg = ACT8945A_LDO1_SUS; + reg = ACT8945A_LDO1_CTRL; break; case ACT8945A_ID_LDO2: - reg = ACT8945A_LDO2_SUS; + reg = ACT8945A_LDO2_CTRL; break; case ACT8945A_ID_LDO3: - reg = ACT8945A_LDO3_SUS; + reg = ACT8945A_LDO3_CTRL; break; case ACT8945A_ID_LDO4: - reg = ACT8945A_LDO4_SUS; + reg = ACT8945A_LDO4_CTRL; break; default: return -EINVAL; From 3829100a63724f6dbf264b2a7f06e7f638ed952d Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Wed, 14 Aug 2019 23:43:19 +0200 Subject: [PATCH 3/3] regulator: twl: voltage lists for vdd1/2 on twl4030 _opp_supported_by_regulators() wrongly ignored errors from regulator_is_supported_voltage(), so it considered errors as success. Since commit 498209445124 ("regulator: core: simplify return value on suported_voltage") regulator_is_supported_voltage() returns a real boolean, so errors make _opp_supported_by_regulators() return false. That reveals a problem with the declaration of the VDD1/2 regulators on twl4030. The VDD1/VDD2 regulators on twl4030 are neither defined with voltage lists nor with the continuous flag set, so regulator_is_supported_voltage() returns false and an error before above mentioned commit (which was considered success) The result is that after the above mentioned commit cpufreq does not work properly e.g. dm3730. [ 2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator [ 2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000) [ 2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator [ 2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000) [ 2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator [ 2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000) The patch fixes declaration of VDD1/2 regulators by adding proper voltage lists. Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage") Cc: stable@vger.kernel.org Signed-off-by: Andreas Kemnade Tested-by: Adam Ford #logicpd-torpedo-37xx-devkit Link: https://lore.kernel.org/r/20190814214319.24087-1-andreas@kemnade.info Signed-off-by: Mark Brown --- drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 6fa15b2d6fb3..866b4dd01da9 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = { 2500, 2750, }; +/* 600mV to 1450mV in 12.5 mV steps */ +static const struct regulator_linear_range VDD1_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) +}; + +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ +static const struct regulator_linear_range VDD2_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), + REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) +}; + static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev) } static const struct regulator_ops twl4030smps_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage = twl4030smps_set_voltage, .get_voltage = twl4030smps_get_voltage, }; @@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \ }, \ } -#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \ + n_volt) \ static const struct twlreg_info TWL4030_INFO_##label = { \ .base = offset, \ .id = num, \ @@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \ .owner = THIS_MODULE, \ .enable_time = turnon_delay, \ .of_map_mode = twl4030reg_map_mode, \ + .n_voltages = n_volt, \ + .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \ + .linear_ranges = label ## _ranges, \ }, \ } @@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00); TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08); TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08); TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08); -TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08); -TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08); +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68); +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69); /* VUSBCP is managed *only* by the USB subchip */ TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);