drm/i915: gmch: fix stuck primary plane due to memory self-refresh mode
Blanking/unblanking the console in a loop on an Asus T100 sometimes
leaves the console blank. After some digging I found that applying
commit 61bc95c1fb
Author: Egbert Eich <eich@suse.com>
Date: Mon Mar 4 09:24:38 2013 -0500
DRM/i915: On G45 enable cursor plane briefly after enabling the display plane.
fixed VLV too.
In my case the problem seemed to happen already during the previous crtc
disabling and went away if I disabled self-refresh mode before disabling
the primary plane.
The root cause for this is that updates from the shadow to live plane
control register are blocked at vblank time if the memory self-refresh
mode (aka max-fifo mode on VLV) is active at that moment. The controller
checks at frame start time if the CPU is in C0 and the self-refresh mode
enable bit is set and if so activates self-reresh mode, otherwise
deactivates it. So to make sure that the plane truly gets disabled before
pipe-off we have to:
1. disable memory self-refresh mode
2. disable plane
3. wait for vblank
4. disable pipe
5. wait for pipe-off
v2:
- add explanation for the root cause from HW team (Cesar Mancini et al)
- remove note about the CPU C7S state, in my latest tests disabling it
alone didn't make a difference
- add vblank between disabling plane and pipe (Ville)
- apply the same workaround for all gmch platforms (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
parent
9858425c8f
commit
564ed191f5
|
@ -4818,6 +4818,16 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
|
|||
if (IS_GEN2(dev))
|
||||
intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
|
||||
|
||||
/*
|
||||
* Vblank time updates from the shadow to live plane control register
|
||||
* are blocked if the memory self-refresh mode is active at that
|
||||
* moment. So to make sure the plane gets truly disabled, disable
|
||||
* first the self-refresh mode. The self-refresh enable bit in turn
|
||||
* will be checked/applied by the HW only at the next frame start
|
||||
* event which is after the vblank start event, so we need to have a
|
||||
* wait-for-vblank between disabling the plane and the pipe.
|
||||
*/
|
||||
intel_set_memory_cxsr(dev_priv, false);
|
||||
intel_crtc_disable_planes(crtc);
|
||||
|
||||
for_each_encoder_on_crtc(dev, crtc, encoder)
|
||||
|
@ -4826,9 +4836,10 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
|
|||
/*
|
||||
* On gen2 planes are double buffered but the pipe isn't, so we must
|
||||
* wait for planes to fully turn off before disabling the pipe.
|
||||
* We also need to wait on all gmch platforms because of the
|
||||
* self-refresh mode constraint explained above.
|
||||
*/
|
||||
if (IS_GEN2(dev))
|
||||
intel_wait_for_vblank(dev, pipe);
|
||||
intel_wait_for_vblank(dev, pipe);
|
||||
|
||||
intel_disable_pipe(dev_priv, pipe);
|
||||
|
||||
|
|
Loading…
Reference in a new issue