redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC 

The Ethernet controller available in Meson8b and GXBB SoCs is a Synopsys
DesignWare MAC IP core which is already supported by the stmmac driver.

In addition to the standard stmmac driver some Meson8b / GXBB specific
registers have to be configured for the PHY clocks. These SoC specific
registers are called PRG_ETHERNET_ADDR0 and PRG_ETHERNET_ADDR1 in the
datasheet.
These registers are not backwards compatible with those on Meson 6b,
which is why a new glue driver is introduced. This worked for many
boards because the bootloader programs the PRG_ETHERNET registers
correctly. Additionally the meson6-dwmac driver only sets bit 1 of
PRG_ETHERNET_ADDR0 which (according to the datasheet) is only used
during reset.

Currently all configuration values can be determined automatically,
based on the configured phy-mode (which is mandatory for the stmmac
driver). If required the tx-delay and the mux clock (so it supports
the MPLL2 clock as well) can be made configurable in the future.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
hifive-unleashed-5.1
Martin Blumenstingl 2016-09-06 23:38:46 +02:00 committed by Kevin Hilman
parent 1b0acbfdb8
commit 566e825162
3 changed files with 328 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/net/ethernet/stmicro/stmmac/Kconfig
View File

@ -61,13 +61,13 @@ config DWMAC_LPC18XX
config DWMAC_MESON
tristate "Amlogic Meson dwmac support"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
help
Support for Ethernet controller on Amlogic Meson SoCs.
This selects the Amlogic Meson SoC glue layer support for
the stmmac device driver. This driver is used for Meson6 and
Meson8 SoCs.
the stmmac device driver. This driver is used for Meson6,
Meson8, Meson8b and GXBB SoCs.
config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"

2
drivers/net/ethernet/stmicro/stmmac/Makefile
View File

@ -9,7 +9,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o dwmac-meson8b.o
obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o

324
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c 100644
View File

@ -0,0 +1,324 @@
/*
* Amlogic Meson8b and GXBB DWMAC glue layer
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/ethtool.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/of_net.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/stmmac.h>
#include "stmmac_platform.h"
#define PRG_ETH0 0x0
#define PRG_ETH0_RGMII_MODE BIT(0)
/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
#define PRG_ETH0_TXDLY_SHIFT 5
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
#define PRG_ETH0_TXDLY_OFF (0x0 << PRG_ETH0_TXDLY_SHIFT)
#define PRG_ETH0_TXDLY_QUARTER (0x1 << PRG_ETH0_TXDLY_SHIFT)
#define PRG_ETH0_TXDLY_HALF (0x2 << PRG_ETH0_TXDLY_SHIFT)
#define PRG_ETH0_TXDLY_THREE_QUARTERS (0x3 << PRG_ETH0_TXDLY_SHIFT)
/* divider for the result of m250_sel */
#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
#define PRG_ETH0_CLK_M250_DIV_WIDTH 3
/* divides the result of m25_sel by either 5 (bit unset) or 10 (bit set) */
#define PRG_ETH0_CLK_M25_DIV_SHIFT 10
#define PRG_ETH0_CLK_M25_DIV_WIDTH 1
#define PRG_ETH0_INVERTED_RMII_CLK BIT(11)
#define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12)
#define MUX_CLK_NUM_PARENTS 2
struct meson8b_dwmac {
struct platform_device *pdev;
void __iomem *regs;
phy_interface_t phy_mode;
struct clk_mux m250_mux;
struct clk *m250_mux_clk;
struct clk *m250_mux_parent[MUX_CLK_NUM_PARENTS];
struct clk_divider m250_div;
struct clk *m250_div_clk;
struct clk_divider m25_div;
struct clk *m25_div_clk;
};
static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
u32 mask, u32 value)
{
u32 data;
data = readl(dwmac->regs + reg);
data &= ~mask;
data |= (value & mask);
writel(data, dwmac->regs + reg);
}
static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
{
struct clk_init_data init;
int i, ret;
struct device *dev = &dwmac->pdev->dev;
char clk_name[32];
const char *clk_div_parents[1];
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
static struct clk_div_table clk_25m_div_table[] = {
{ .val = 0, .div = 5 },
{ .val = 1, .div = 10 },
{ /* sentinel */ },
};
/* get the mux parents from DT */
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
char name[16];
snprintf(name, sizeof(name), "clkin%d", i);
dwmac->m250_mux_parent[i] = devm_clk_get(dev, name);
if (IS_ERR(dwmac->m250_mux_parent[i])) {
ret = PTR_ERR(dwmac->m250_mux_parent[i]);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Missing clock %s\n", name);
return ret;
}
mux_parent_names[i] =
__clk_get_name(dwmac->m250_mux_parent[i]);
}
/* create the m250_mux */
snprintf(clk_name, sizeof(clk_name), "%s#m250_sel", dev_name(dev));
init.name = clk_name;
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
init.num_parents = MUX_CLK_NUM_PARENTS;
dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
dwmac->m250_mux.flags = 0;
dwmac->m250_mux.table = NULL;
dwmac->m250_mux.hw.init = &init;
dwmac->m250_mux_clk = devm_clk_register(dev, &dwmac->m250_mux.hw);
if (WARN_ON(IS_ERR(dwmac->m250_mux_clk)))
return PTR_ERR(dwmac->m250_mux_clk);
/* create the m250_div */
snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
init.parent_names = clk_div_parents;
init.num_parents = ARRAY_SIZE(clk_div_parents);
dwmac->m250_div.reg = dwmac->regs + PRG_ETH0;
dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
dwmac->m250_div.hw.init = &init;
dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
dwmac->m250_div_clk = devm_clk_register(dev, &dwmac->m250_div.hw);
if (WARN_ON(IS_ERR(dwmac->m250_div_clk)))
return PTR_ERR(dwmac->m250_div_clk);
/* create the m25_div */
snprintf(clk_name, sizeof(clk_name), "%s#m25_div", dev_name(dev));
init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
init.ops = &clk_divider_ops;
init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
clk_div_parents[0] = __clk_get_name(dwmac->m250_div_clk);
init.parent_names = clk_div_parents;
init.num_parents = ARRAY_SIZE(clk_div_parents);
dwmac->m25_div.reg = dwmac->regs + PRG_ETH0;
dwmac->m25_div.shift = PRG_ETH0_CLK_M25_DIV_SHIFT;
dwmac->m25_div.width = PRG_ETH0_CLK_M25_DIV_WIDTH;
dwmac->m25_div.table = clk_25m_div_table;
dwmac->m25_div.hw.init = &init;
dwmac->m25_div.flags = CLK_DIVIDER_ALLOW_ZERO;
dwmac->m25_div_clk = devm_clk_register(dev, &dwmac->m25_div.hw);
if (WARN_ON(IS_ERR(dwmac->m25_div_clk)))
return PTR_ERR(dwmac->m25_div_clk);
return 0;
}
static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
{
int ret;
unsigned long clk_rate;
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* Generate a 25MHz clock for the PHY */
clk_rate = 25 * 1000 * 1000;
/* enable RGMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
PRG_ETH0_RGMII_MODE);
/* only relevant for RMII mode -> disable in RGMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK, 0);
/* TX clock delay - all known boards use a 1/4 cycle delay */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
PRG_ETH0_TXDLY_QUARTER);
break;
case PHY_INTERFACE_MODE_RMII:
/* Use the rate of the mux clock for the internal RMII PHY */
clk_rate = clk_get_rate(dwmac->m250_mux_clk);
/* disable RGMII mode -> enables RMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
0);
/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK,
PRG_ETH0_INVERTED_RMII_CLK);
/* TX clock delay cannot be configured in RMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
0);
break;
default:
dev_err(&dwmac->pdev->dev, "unsupported phy-mode %s\n",
phy_modes(dwmac->phy_mode));
return -EINVAL;
}
ret = clk_prepare_enable(dwmac->m25_div_clk);
if (ret) {
dev_err(&dwmac->pdev->dev, "failed to enable the PHY clock\n");
return ret;
}
ret = clk_set_rate(dwmac->m25_div_clk, clk_rate);
if (ret) {
clk_disable_unprepare(dwmac->m25_div_clk);
dev_err(&dwmac->pdev->dev, "failed to set PHY clock\n");
return ret;
}
/* enable TX_CLK and PHY_REF_CLK generator */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
PRG_ETH0_TX_AND_PHY_REF_CLK);
return 0;
}
static int meson8b_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
struct resource *res;
struct meson8b_dwmac *dwmac;
int ret;
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(dwmac->regs))
return PTR_ERR(dwmac->regs);
dwmac->pdev = pdev;
dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
if (dwmac->phy_mode < 0) {
dev_err(&pdev->dev, "missing phy-mode property\n");
return -EINVAL;
}
ret = meson8b_init_clk(dwmac);
if (ret)
return ret;
ret = meson8b_init_prg_eth(dwmac);
if (ret)
return ret;
plat_dat->bsp_priv = dwmac;
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
static int meson8b_dwmac_remove(struct platform_device *pdev)
{
struct meson8b_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
clk_disable_unprepare(dwmac->m25_div_clk);
return stmmac_pltfr_remove(pdev);
}
static const struct of_device_id meson8b_dwmac_match[] = {
{ .compatible = "amlogic,meson8b-dwmac" },
{ .compatible = "amlogic,meson-gxbb-dwmac" },
{ }
};
MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);
static struct platform_driver meson8b_dwmac_driver = {
.probe = meson8b_dwmac_probe,
.remove = meson8b_dwmac_remove,
.driver = {
.name = "meson8b-dwmac",
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = meson8b_dwmac_match,
},
};
module_platform_driver(meson8b_dwmac_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_DESCRIPTION("Amlogic Meson8b and GXBB DWMAC glue layer");
MODULE_LICENSE("GPL v2");