diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 5f41c1f7a5f3..3c0917fa791c 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -12,16 +12,14 @@ / { model = "MPC8540ADS"; - compatible = "MPC85xxADS"; + compatible = "MPC8540ADS", "MPC85xxADS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8540@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,24 +64,20 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <37 1>; reg = <3>; device_type = "ethernet-phy"; @@ -102,8 +94,8 @@ address = [ 00 E0 0C 00 73 00 ]; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -116,8 +108,8 @@ address = [ 00 E0 0C 00 73 01 ]; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; ethernet@26000 { @@ -130,8 +122,8 @@ address = [ 00 E0 0C 00 73 02 ]; local-mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = <19 2>; - interrupt-parent = <40000>; - phy-handle = <2452003>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; serial@4500 { @@ -140,7 +132,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -149,85 +141,84 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; pci@8000 { - linux,phandle = <8000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x02 */ - 1000 0 0 1 40000 31 1 - 1000 0 0 2 40000 32 1 - 1000 0 0 3 40000 33 1 - 1000 0 0 4 40000 34 1 + 1000 0 0 1 &mpic 31 1 + 1000 0 0 2 &mpic 32 1 + 1000 0 0 3 &mpic 33 1 + 1000 0 0 4 &mpic 34 1 /* IDSEL 0x03 */ - 1800 0 0 1 40000 34 1 - 1800 0 0 2 40000 31 1 - 1800 0 0 3 40000 32 1 - 1800 0 0 4 40000 33 1 + 1800 0 0 1 &mpic 34 1 + 1800 0 0 2 &mpic 31 1 + 1800 0 0 3 &mpic 32 1 + 1800 0 0 4 &mpic 33 1 /* IDSEL 0x04 */ - 2000 0 0 1 40000 33 1 - 2000 0 0 2 40000 34 1 - 2000 0 0 3 40000 31 1 - 2000 0 0 4 40000 32 1 + 2000 0 0 1 &mpic 33 1 + 2000 0 0 2 &mpic 34 1 + 2000 0 0 3 &mpic 31 1 + 2000 0 0 4 &mpic 32 1 /* IDSEL 0x05 */ - 2800 0 0 1 40000 32 1 - 2800 0 0 2 40000 33 1 - 2800 0 0 3 40000 34 1 - 2800 0 0 4 40000 31 1 + 2800 0 0 1 &mpic 32 1 + 2800 0 0 2 &mpic 33 1 + 2800 0 0 3 &mpic 34 1 + 2800 0 0 4 &mpic 31 1 /* IDSEL 0x0c */ - 6000 0 0 1 40000 31 1 - 6000 0 0 2 40000 32 1 - 6000 0 0 3 40000 33 1 - 6000 0 0 4 40000 34 1 + 6000 0 0 1 &mpic 31 1 + 6000 0 0 2 &mpic 32 1 + 6000 0 0 3 &mpic 33 1 + 6000 0 0 4 &mpic 34 1 /* IDSEL 0x0d */ - 6800 0 0 1 40000 34 1 - 6800 0 0 2 40000 31 1 - 6800 0 0 3 40000 32 1 - 6800 0 0 4 40000 33 1 + 6800 0 0 1 &mpic 34 1 + 6800 0 0 2 &mpic 31 1 + 6800 0 0 3 &mpic 32 1 + 6800 0 0 4 &mpic 33 1 /* IDSEL 0x0e */ - 7000 0 0 1 40000 33 1 - 7000 0 0 2 40000 34 1 - 7000 0 0 3 40000 31 1 - 7000 0 0 4 40000 32 1 + 7000 0 0 1 &mpic 33 1 + 7000 0 0 2 &mpic 34 1 + 7000 0 0 3 &mpic 31 1 + 7000 0 0 4 &mpic 32 1 /* IDSEL 0x0f */ - 7800 0 0 1 40000 32 1 - 7800 0 0 2 40000 33 1 - 7800 0 0 3 40000 34 1 - 7800 0 0 4 40000 31 1 + 7800 0 0 1 &mpic 32 1 + 7800 0 0 2 &mpic 33 1 + 7800 0 0 3 &mpic 34 1 + 7800 0 0 4 &mpic 31 1 /* IDSEL 0x12 */ - 9000 0 0 1 40000 31 1 - 9000 0 0 2 40000 32 1 - 9000 0 0 3 40000 33 1 - 9000 0 0 4 40000 34 1 + 9000 0 0 1 &mpic 31 1 + 9000 0 0 2 &mpic 32 1 + 9000 0 0 3 &mpic 33 1 + 9000 0 0 4 &mpic 34 1 /* IDSEL 0x13 */ - 9800 0 0 1 40000 34 1 - 9800 0 0 2 40000 31 1 - 9800 0 0 3 40000 32 1 - 9800 0 0 4 40000 33 1 + 9800 0 0 1 &mpic 34 1 + 9800 0 0 2 &mpic 31 1 + 9800 0 0 3 &mpic 32 1 + 9800 0 0 4 &mpic 33 1 /* IDSEL 0x14 */ - a000 0 0 1 40000 33 1 - a000 0 0 2 40000 34 1 - a000 0 0 3 40000 31 1 - a000 0 0 4 40000 32 1 + a000 0 0 1 &mpic 33 1 + a000 0 0 2 &mpic 34 1 + a000 0 0 3 &mpic 31 1 + a000 0 0 4 &mpic 32 1 /* IDSEL 0x15 */ - a800 0 0 1 40000 32 1 - a800 0 0 2 40000 33 1 - a800 0 0 3 40000 34 1 - a800 0 0 4 40000 31 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 32 1 + a800 0 0 2 &mpic 33 1 + a800 0 0 3 &mpic 34 1 + a800 0 0 4 &mpic 31 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -241,8 +232,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 7be0bc659e1c..2a1ae760ab3a 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -12,16 +12,14 @@ / { model = "MPC8541CDS"; - compatible = "MPC85xxCDS"; + compatible = "MPC8541CDS", "MPC85xxCDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8541@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,17 +64,14 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <1>; device_type = "ethernet-phy"; @@ -94,8 +87,8 @@ reg = <24000 1000>; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -107,8 +100,8 @@ reg = <25000 1000>; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; serial@4500 { @@ -117,7 +110,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -126,57 +119,56 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; - pci@8000 { - linux,phandle = <8000>; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 40000 30 1 - 08000 0 0 2 40000 31 1 - 08000 0 0 3 40000 32 1 - 08000 0 0 4 40000 33 1 + 08000 0 0 1 &mpic 30 1 + 08000 0 0 2 &mpic 31 1 + 08000 0 0 3 &mpic 32 1 + 08000 0 0 4 &mpic 33 1 /* IDSEL 0x11 */ - 08800 0 0 1 40000 30 1 - 08800 0 0 2 40000 31 1 - 08800 0 0 3 40000 32 1 - 08800 0 0 4 40000 33 1 + 08800 0 0 1 &mpic 30 1 + 08800 0 0 2 &mpic 31 1 + 08800 0 0 3 &mpic 32 1 + 08800 0 0 4 &mpic 33 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 40000 30 1 - 09000 0 0 2 40000 31 1 - 09000 0 0 3 40000 32 1 - 09000 0 0 4 40000 33 1 + 09000 0 0 1 &mpic 30 1 + 09000 0 0 2 &mpic 31 1 + 09000 0 0 3 &mpic 32 1 + 09000 0 0 4 &mpic 33 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 40000 31 1 - 09800 0 0 2 40000 32 1 - 09800 0 0 3 40000 33 1 - 09800 0 0 4 40000 30 1 + 09800 0 0 1 &mpic 31 1 + 09800 0 0 2 &mpic 32 1 + 09800 0 0 3 &mpic 33 1 + 09800 0 0 4 &mpic 30 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 40000 32 1 - 0a000 0 0 2 40000 33 1 - 0a000 0 0 3 40000 30 1 - 0a000 0 0 4 40000 31 1 + 0a000 0 0 1 &mpic 32 1 + 0a000 0 0 2 &mpic 33 1 + 0a000 0 0 3 &mpic 30 1 + 0a000 0 0 4 &mpic 31 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 40000 33 1 - 0a800 0 0 2 40000 30 1 - 0a800 0 0 3 40000 31 1 - 0a800 0 0 4 40000 32 1 + 0a800 0 0 1 &mpic 33 1 + 0a800 0 0 2 &mpic 30 1 + 0a800 0 0 3 &mpic 31 1 + 0a800 0 0 4 &mpic 32 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 40000 30 1 - 19000 0 0 2 40000 31 1 - 19000 0 0 3 40000 32 1 - 19000 0 0 4 40000 33 1>; - interrupt-parent = <40000>; + 19000 0 0 1 &mpic 30 1 + 19000 0 0 2 &mpic 31 1 + 19000 0 0 3 &mpic 32 1 + 19000 0 0 4 &mpic 33 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -200,21 +192,20 @@ compatible = "chrp,iic"; big-endian; interrupts = <1>; - interrupt-parent = <8000>; + interrupt-parent = <&pci1>; }; }; pci@9000 { - linux,phandle = <9000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 40000 3b 1 - a800 0 0 2 40000 3b 1 - a800 0 0 3 40000 3b 1 - a800 0 0 4 40000 3b 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 3b 1 + a800 0 0 2 &mpic 3b 1 + a800 0 0 3 &mpic 3b 1 + a800 0 0 4 &mpic 3b 1>; + interrupt-parent = <&mpic>; interrupts = <09 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 @@ -228,8 +219,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 893d7957c174..7eb5d81d5eec 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -12,16 +12,14 @@ / { model = "MPC8548CDS"; - compatible = "MPC85xxCDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8548@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,32 +64,26 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <1>; device_type = "ethernet-phy"; }; - - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <3>; device_type = "ethernet-phy"; @@ -109,8 +99,8 @@ reg = <24000 1000>; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -122,10 +112,11 @@ reg = <25000 1000>; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; +/* eTSEC 3/4 are currently broken ethernet@26000 { #address-cells = <1>; #size-cells = <0>; @@ -135,11 +126,10 @@ reg = <26000 1000>; local-mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; }; -/* eTSEC 4 is currently broken ethernet@27000 { #address-cells = <1>; #size-cells = <0>; @@ -149,8 +139,8 @@ reg = <27000 1000>; local-mac-address = [ 00 E0 0C 00 73 03 ]; interrupts = <15 2 16 2 17 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; */ @@ -160,7 +150,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -169,57 +159,56 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; - pci@8000 { - linux,phandle = <8000>; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 40000 30 1 - 08000 0 0 2 40000 31 1 - 08000 0 0 3 40000 32 1 - 08000 0 0 4 40000 33 1 + 08000 0 0 1 &mpic 30 1 + 08000 0 0 2 &mpic 31 1 + 08000 0 0 3 &mpic 32 1 + 08000 0 0 4 &mpic 33 1 /* IDSEL 0x11 */ - 08800 0 0 1 40000 30 1 - 08800 0 0 2 40000 31 1 - 08800 0 0 3 40000 32 1 - 08800 0 0 4 40000 33 1 + 08800 0 0 1 &mpic 30 1 + 08800 0 0 2 &mpic 31 1 + 08800 0 0 3 &mpic 32 1 + 08800 0 0 4 &mpic 33 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 40000 30 1 - 09000 0 0 2 40000 31 1 - 09000 0 0 3 40000 32 1 - 09000 0 0 4 40000 33 1 + 09000 0 0 1 &mpic 30 1 + 09000 0 0 2 &mpic 31 1 + 09000 0 0 3 &mpic 32 1 + 09000 0 0 4 &mpic 33 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 40000 31 1 - 09800 0 0 2 40000 32 1 - 09800 0 0 3 40000 33 1 - 09800 0 0 4 40000 30 1 + 09800 0 0 1 &mpic 31 1 + 09800 0 0 2 &mpic 32 1 + 09800 0 0 3 &mpic 33 1 + 09800 0 0 4 &mpic 30 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 40000 32 1 - 0a000 0 0 2 40000 33 1 - 0a000 0 0 3 40000 30 1 - 0a000 0 0 4 40000 31 1 + 0a000 0 0 1 &mpic 32 1 + 0a000 0 0 2 &mpic 33 1 + 0a000 0 0 3 &mpic 30 1 + 0a000 0 0 4 &mpic 31 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 40000 33 1 - 0a800 0 0 2 40000 30 1 - 0a800 0 0 3 40000 31 1 - 0a800 0 0 4 40000 32 1 + 0a800 0 0 1 &mpic 33 1 + 0a800 0 0 2 &mpic 30 1 + 0a800 0 0 3 &mpic 31 1 + 0a800 0 0 4 &mpic 32 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 40000 30 1 - 19000 0 0 2 40000 31 1 - 19000 0 0 3 40000 32 1 - 19000 0 0 4 40000 33 1>; - interrupt-parent = <40000>; + 19000 0 0 1 &mpic 30 1 + 19000 0 0 2 &mpic 31 1 + 19000 0 0 3 &mpic 32 1 + 19000 0 0 4 &mpic 33 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -243,21 +232,20 @@ compatible = "chrp,iic"; big-endian; interrupts = <1>; - interrupt-parent = <8000>; + interrupt-parent = <&pci1>; }; }; pci@9000 { - linux,phandle = <9000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 40000 3b 1 - a800 0 0 2 40000 3b 1 - a800 0 0 3 40000 3b 1 - a800 0 0 4 40000 3b 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 3b 1 + a800 0 0 2 &mpic 3b 1 + a800 0 0 3 &mpic 3b 1 + a800 0 0 4 &mpic 3b 1>; + interrupt-parent = <&mpic>; interrupts = <09 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 @@ -271,8 +259,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 118f5a887651..5f9c102a0ab4 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -12,16 +12,14 @@ / { model = "MPC8555CDS"; - compatible = "MPC85xxCDS"; + compatible = "MPC8555CDS", "MPC85xxCDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8555@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,17 +64,14 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <1>; device_type = "ethernet-phy"; @@ -94,8 +87,8 @@ reg = <24000 1000>; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = <0d 2 0e 2 12 2>; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -107,8 +100,8 @@ reg = <25000 1000>; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; serial@4500 { @@ -117,7 +110,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -126,57 +119,56 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; - pci@8000 { - linux,phandle = <8000>; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 40000 30 1 - 08000 0 0 2 40000 31 1 - 08000 0 0 3 40000 32 1 - 08000 0 0 4 40000 33 1 + 08000 0 0 1 &mpic 30 1 + 08000 0 0 2 &mpic 31 1 + 08000 0 0 3 &mpic 32 1 + 08000 0 0 4 &mpic 33 1 /* IDSEL 0x11 */ - 08800 0 0 1 40000 30 1 - 08800 0 0 2 40000 31 1 - 08800 0 0 3 40000 32 1 - 08800 0 0 4 40000 33 1 + 08800 0 0 1 &mpic 30 1 + 08800 0 0 2 &mpic 31 1 + 08800 0 0 3 &mpic 32 1 + 08800 0 0 4 &mpic 33 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 40000 30 1 - 09000 0 0 2 40000 31 1 - 09000 0 0 3 40000 32 1 - 09000 0 0 4 40000 33 1 + 09000 0 0 1 &mpic 30 1 + 09000 0 0 2 &mpic 31 1 + 09000 0 0 3 &mpic 32 1 + 09000 0 0 4 &mpic 33 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 40000 31 1 - 09800 0 0 2 40000 32 1 - 09800 0 0 3 40000 33 1 - 09800 0 0 4 40000 30 1 + 09800 0 0 1 &mpic 31 1 + 09800 0 0 2 &mpic 32 1 + 09800 0 0 3 &mpic 33 1 + 09800 0 0 4 &mpic 30 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 40000 32 1 - 0a000 0 0 2 40000 33 1 - 0a000 0 0 3 40000 30 1 - 0a000 0 0 4 40000 31 1 + 0a000 0 0 1 &mpic 32 1 + 0a000 0 0 2 &mpic 33 1 + 0a000 0 0 3 &mpic 30 1 + 0a000 0 0 4 &mpic 31 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 40000 33 1 - 0a800 0 0 2 40000 30 1 - 0a800 0 0 3 40000 31 1 - 0a800 0 0 4 40000 32 1 + 0a800 0 0 1 &mpic 33 1 + 0a800 0 0 2 &mpic 30 1 + 0a800 0 0 3 &mpic 31 1 + 0a800 0 0 4 &mpic 32 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 40000 30 1 - 19000 0 0 2 40000 31 1 - 19000 0 0 3 40000 32 1 - 19000 0 0 4 40000 33 1>; - interrupt-parent = <40000>; + 19000 0 0 1 &mpic 30 1 + 19000 0 0 2 &mpic 31 1 + 19000 0 0 3 &mpic 32 1 + 19000 0 0 4 &mpic 33 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -200,21 +192,20 @@ compatible = "chrp,iic"; big-endian; interrupts = <1>; - interrupt-parent = <8000>; + interrupt-parent = <&pci1>; }; }; pci@9000 { - linux,phandle = <9000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 40000 3b 1 - a800 0 0 2 40000 3b 1 - a800 0 0 3 40000 3b 1 - a800 0 0 4 40000 3b 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 3b 1 + a800 0 0 2 &mpic 3b 1 + a800 0 0 3 &mpic 3b 1 + a800 0 0 4 &mpic 3b 1>; + interrupt-parent = <&mpic>; interrupts = <09 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 @@ -228,8 +219,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index c74d6ebc5c8a..10502638b0e9 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -12,16 +12,14 @@ / { model = "MPC8560ADS"; - compatible = "MPC85xxADS"; + compatible = "MPC8560ADS", "MPC85xxADS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8560@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <13ab6680>; clock-frequency = <312c8040>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 10000000>; }; @@ -57,33 +53,28 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <37 1>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <37 1>; reg = <3>; device_type = "ethernet-phy"; @@ -97,8 +88,8 @@ reg = <24000 1000>; address = [ 00 00 0C 00 00 FD ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -110,12 +101,11 @@ reg = <25000 1000>; address = [ 00 00 0C 00 01 FD ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; pci@8000 { - linux,phandle = <8000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -127,96 +117,94 @@ interrupt-map = < /* IDSEL 0x2 */ - 1000 0 0 1 40000 31 1 - 1000 0 0 2 40000 32 1 - 1000 0 0 3 40000 33 1 - 1000 0 0 4 40000 34 1 + 1000 0 0 1 &mpic 31 1 + 1000 0 0 2 &mpic 32 1 + 1000 0 0 3 &mpic 33 1 + 1000 0 0 4 &mpic 34 1 /* IDSEL 0x3 */ - 1800 0 0 1 40000 34 1 - 1800 0 0 2 40000 31 1 - 1800 0 0 3 40000 32 1 - 1800 0 0 4 40000 33 1 + 1800 0 0 1 &mpic 34 1 + 1800 0 0 2 &mpic 31 1 + 1800 0 0 3 &mpic 32 1 + 1800 0 0 4 &mpic 33 1 /* IDSEL 0x4 */ - 2000 0 0 1 40000 33 1 - 2000 0 0 2 40000 34 1 - 2000 0 0 3 40000 31 1 - 2000 0 0 4 40000 32 1 + 2000 0 0 1 &mpic 33 1 + 2000 0 0 2 &mpic 34 1 + 2000 0 0 3 &mpic 31 1 + 2000 0 0 4 &mpic 32 1 /* IDSEL 0x5 */ - 2800 0 0 1 40000 32 1 - 2800 0 0 2 40000 33 1 - 2800 0 0 3 40000 34 1 - 2800 0 0 4 40000 31 1 + 2800 0 0 1 &mpic 32 1 + 2800 0 0 2 &mpic 33 1 + 2800 0 0 3 &mpic 34 1 + 2800 0 0 4 &mpic 31 1 /* IDSEL 12 */ - 6000 0 0 1 40000 31 1 - 6000 0 0 2 40000 32 1 - 6000 0 0 3 40000 33 1 - 6000 0 0 4 40000 34 1 + 6000 0 0 1 &mpic 31 1 + 6000 0 0 2 &mpic 32 1 + 6000 0 0 3 &mpic 33 1 + 6000 0 0 4 &mpic 34 1 /* IDSEL 13 */ - 6800 0 0 1 40000 34 1 - 6800 0 0 2 40000 31 1 - 6800 0 0 3 40000 32 1 - 6800 0 0 4 40000 33 1 + 6800 0 0 1 &mpic 34 1 + 6800 0 0 2 &mpic 31 1 + 6800 0 0 3 &mpic 32 1 + 6800 0 0 4 &mpic 33 1 /* IDSEL 14*/ - 7000 0 0 1 40000 33 1 - 7000 0 0 2 40000 34 1 - 7000 0 0 3 40000 31 1 - 7000 0 0 4 40000 32 1 + 7000 0 0 1 &mpic 33 1 + 7000 0 0 2 &mpic 34 1 + 7000 0 0 3 &mpic 31 1 + 7000 0 0 4 &mpic 32 1 /* IDSEL 15 */ - 7800 0 0 1 40000 32 1 - 7800 0 0 2 40000 33 1 - 7800 0 0 3 40000 34 1 - 7800 0 0 4 40000 31 1 + 7800 0 0 1 &mpic 32 1 + 7800 0 0 2 &mpic 33 1 + 7800 0 0 3 &mpic 34 1 + 7800 0 0 4 &mpic 31 1 /* IDSEL 18 */ - 9000 0 0 1 40000 31 1 - 9000 0 0 2 40000 32 1 - 9000 0 0 3 40000 33 1 - 9000 0 0 4 40000 34 1 + 9000 0 0 1 &mpic 31 1 + 9000 0 0 2 &mpic 32 1 + 9000 0 0 3 &mpic 33 1 + 9000 0 0 4 &mpic 34 1 /* IDSEL 19 */ - 9800 0 0 1 40000 34 1 - 9800 0 0 2 40000 31 1 - 9800 0 0 3 40000 32 1 - 9800 0 0 4 40000 33 1 + 9800 0 0 1 &mpic 34 1 + 9800 0 0 2 &mpic 31 1 + 9800 0 0 3 &mpic 32 1 + 9800 0 0 4 &mpic 33 1 /* IDSEL 20 */ - a000 0 0 1 40000 33 1 - a000 0 0 2 40000 34 1 - a000 0 0 3 40000 31 1 - a000 0 0 4 40000 32 1 + a000 0 0 1 &mpic 33 1 + a000 0 0 2 &mpic 34 1 + a000 0 0 3 &mpic 31 1 + a000 0 0 4 &mpic 32 1 /* IDSEL 21 */ - a800 0 0 1 40000 32 1 - a800 0 0 2 40000 33 1 - a800 0 0 3 40000 34 1 - a800 0 0 4 40000 31 1>; + a800 0 0 1 &mpic 32 1 + a800 0 0 2 &mpic 33 1 + a800 0 0 3 &mpic 34 1 + a800 0 0 4 &mpic 31 1>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; interrupts = <8 0>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 01000000>; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 20100>; + reg = <40000 40000>; built-in; device_type = "open-pic"; }; cpm@e0000000 { - linux,phandle = ; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -227,13 +215,12 @@ command-proc = <919c0>; brg-frequency = <9d5b340>; - pic@90c00 { - linux,phandle = <90c00>; + cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; interrupts = <1e 0>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; reg = <90c00 80>; built-in; device_type = "cpm-pic"; @@ -250,7 +237,7 @@ tx-clock = <1>; current-speed = <1c200>; interrupts = <28 8>; - interrupt-parent = <90c00>; + interrupt-parent = <&cpmpic>; }; scc@91a20 { @@ -264,7 +251,7 @@ tx-clock = <2>; current-speed = <1c200>; interrupts = <29 8>; - interrupt-parent = <90c00>; + interrupt-parent = <&cpmpic>; }; fcc@91320 { @@ -278,8 +265,8 @@ rx-clock = <15>; tx-clock = <16>; interrupts = <21 8>; - interrupt-parent = <90c00>; - phy-handle = <2452002>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy2>; }; fcc@91340 { @@ -293,8 +280,8 @@ rx-clock = <17>; tx-clock = <18>; interrupts = <22 8>; - interrupt-parent = <90c00>; - phy-handle = <2452003>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 06d24653e422..bf49d8c997b9 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -16,16 +16,14 @@ / { model = "MPC8568EMDS"; - compatible = "MPC85xxMDS"; + compatible = "MPC8568EMDS", "MPC85xxMDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8568@0 { device_type = "cpu"; @@ -38,13 +36,11 @@ bus-frequency = <0>; clock-frequency = <0>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 10000000>; }; @@ -67,7 +63,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -76,7 +72,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -86,32 +82,26 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <1>; device_type = "ethernet-phy"; }; - - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <3>; device_type = "ethernet-phy"; @@ -127,8 +117,8 @@ reg = <24000 1000>; mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452002>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; }; ethernet@25000 { @@ -140,8 +130,8 @@ reg = <25000 1000>; mac-address = [ 00 00 00 00 00 00]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452003>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; serial@4500 { @@ -150,7 +140,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -159,7 +149,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; crypto@30000 { @@ -168,15 +158,14 @@ compatible = "talitos"; reg = <30000 f000>; interrupts = <1d 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <000000fe>; descriptor-types-mask = <012b0ebf>; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; @@ -192,8 +181,7 @@ device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { - linux,phandle = ; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ 4 0a 1 0 2 0 /* TxD0 */ @@ -220,8 +208,7 @@ 4 13 1 0 2 0 /* GTX_CLK */ 1 1f 2 0 3 0>; /* GTX125 */ }; - ucc_pin@02 { - linux,phandle = ; + pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ 5 0a 1 0 2 0 /* TxD0 */ @@ -277,7 +264,7 @@ compatible = "fsl_spi"; reg = <4c0 40>; interrupts = <2>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mode = "cpu"; }; @@ -286,7 +273,7 @@ compatible = "fsl_spi"; reg = <500 40>; interrupts = <1>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mode = "cpu"; }; @@ -297,12 +284,12 @@ device-id = <1>; reg = <2000 200>; interrupts = <20>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mac-address = [ 00 04 9f 00 23 23 ]; rx-clock = <0>; tx-clock = <19>; - phy-handle = <212000>; - pio-handle = ; + phy-handle = <&qe_phy0>; + pio-handle = <&pio1>; }; ucc@3000 { @@ -312,12 +299,12 @@ device-id = <2>; reg = <3000 200>; interrupts = <21>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mac-address = [ 00 11 22 33 44 55 ]; rx-clock = <0>; tx-clock = <14>; - phy-handle = <212001>; - pio-handle = ; + phy-handle = <&qe_phy1>; + pio-handle = <&pio2>; }; mdio@2120 { @@ -329,33 +316,29 @@ /* These are the same PHYs as on * gianfar's MDIO bus */ - ethernet-phy@00 { - linux,phandle = <212000>; - interrupt-parent = <40000>; + qe_phy0: ethernet-phy@00 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <0>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@01 { - linux,phandle = <212001>; - interrupt-parent = <40000>; + qe_phy1: ethernet-phy@01 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <1>; device_type = "ethernet-phy"; interface = <6>; }; - ethernet-phy@02 { - linux,phandle = <212002>; - interrupt-parent = <40000>; + qe_phy2: ethernet-phy@02 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <2>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@03 { - linux,phandle = <212003>; - interrupt-parent = <40000>; + qe_phy3: ethernet-phy@03 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <3>; device_type = "ethernet-phy"; @@ -363,8 +346,7 @@ }; }; - qeic@80 { - linux,phandle = <80>; + qeic: qeic@80 { interrupt-controller; device_type = "qeic"; #address-cells = <0>; @@ -373,7 +355,7 @@ built-in; big-endian; interrupts = <1e 2 1e 2>; //high:30 low:30 - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig index 058e06d88bc1..7b3800674cbf 100644 --- a/arch/powerpc/configs/mpc8568mds_defconfig +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Wed Feb 7 23:54:25 2007 +# Linux kernel version: 2.6.20 +# Sat Feb 17 16:26:53 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_83xx is not set CONFIG_PPC_85xx=y # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_85xx=y CONFIG_E500=y @@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -130,7 +131,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set -CONFIG_MPC8568_MDS=y +CONFIG_MPC85xx_MDS=y CONFIG_MPC85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPIC=y @@ -162,6 +163,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -171,6 +173,7 @@ CONFIG_ISA_DMA_API=y # # Bus options # +CONFIG_ZONE_DMA=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y @@ -216,6 +219,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -301,6 +305,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -341,7 +346,6 @@ CONFIG_BLK_DEV_INITRD=y # # Misc devices # -# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -543,6 +547,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,6 +703,7 @@ CONFIG_FIRMWARE_EDID=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -759,6 +765,10 @@ CONFIG_HID=y # DMA Devices # +# +# Auxiliary Display support +# + # # Virtualization # @@ -896,7 +906,8 @@ CONFIG_BITREVERSE=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y # # Instrumentation Support @@ -914,6 +925,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -922,7 +934,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -932,6 +943,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set # CONFIG_BDI_SWITCH is not set @@ -943,6 +956,8 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set # # Security options @@ -970,8 +985,10 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -985,6 +1002,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0efdd2f1babe..eb661ccf2dab 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -23,12 +23,12 @@ config MPC85xx_CDS help This option enables support for the MPC85xx CDS board -config MPC8568_MDS - bool "Freescale MPC8568 MDS" +config MPC85xx_MDS + bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE # select QUICC_ENGINE help - This option enables support for the MPC8568 MDS board + This option enables support for the MPC85xx MDS board endchoice @@ -47,7 +47,7 @@ config MPC85xx bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS + default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS config PPC_INDIRECT_PCI_BE bool diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index e40e521816b8..4e63917ada9d 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o -obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o +obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 741bcea8f991..8ed034aeca5f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -272,10 +272,9 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) */ static int __init mpc85xx_ads_probe(void) { - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC85xxADS"); } define_machine(mpc85xx_ads) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index bf6c60455a89..4232686be441 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -291,11 +291,9 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) */ static int __init mpc85xx_cds_probe(void) { - /* We always match for now, eventually we should look at - * the flat dev tree to ensure this is the board we are - * supposed to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC85xxCDS"); } define_machine(mpc85xx_cds) { diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c similarity index 85% rename from arch/powerpc/platforms/85xx/mpc8568_mds.c rename to arch/powerpc/platforms/85xx/mpc85xx_mds.c index 324138a206a4..81144d2ae455 100644 --- a/arch/powerpc/platforms/85xx/mpc8568_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -8,7 +8,7 @@ * Yin Olivia * * Description: - * MPC8568E MDS PB board specific routines. + * MPC85xx MDS board specific routines. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -69,14 +69,13 @@ unsigned long isa_mem_base = 0; * Setup the architecture * */ -static void __init mpc8568_mds_setup_arch(void) +static void __init mpc85xx_mds_setup_arch(void) { struct device_node *np; static u8 *bcsr_regs = NULL; - if (ppc_md.progress) - ppc_md.progress("mpc8568_mds_setup_arch()", 0); + ppc_md.progress("mpc85xx_mds_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np != NULL) { @@ -144,26 +143,26 @@ static void __init mpc8568_mds_setup_arch(void) #endif /* CONFIG_QUICC_ENGINE */ } -static struct of_device_id mpc8568_ids[] = { +static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .type = "qe", }, {}, }; -static int __init mpc8568_publish_devices(void) +static int __init mpc85xx_publish_devices(void) { - if (!machine_is(mpc8568_mds)) + if (!machine_is(mpc85xx_mds)) return 0; /* Publish the QE devices */ - of_platform_bus_probe(NULL,mpc8568_ids,NULL); + of_platform_bus_probe(NULL,mpc85xx_ids,NULL); return 0; } -device_initcall(mpc8568_publish_devices); +device_initcall(mpc85xx_publish_devices); -static void __init mpc8568_mds_pic_init(void) +static void __init mpc85xx_mds_pic_init(void) { struct mpic *mpic; struct resource r; @@ -206,7 +205,6 @@ static void __init mpc8568_mds_pic_init(void) mpic_init(mpic); - #ifdef CONFIG_QUICC_ENGINE np = of_find_node_by_type(NULL, "qeic"); if (!np) @@ -217,27 +215,18 @@ static void __init mpc8568_mds_pic_init(void) #endif /* CONFIG_QUICC_ENGINE */ } - -static int __init mpc8568_mds_probe(void) +static int __init mpc85xx_mds_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC8568EMDS")) - return 0; + unsigned long root = of_get_flat_dt_root(); - DBG("MPC8568EMDS found\n"); - - return 1; + return of_flat_dt_is_compatible(root, "MPC85xxMDS"); } - -define_machine(mpc8568_mds) { - .name = "MPC8568E MDS", - .probe = mpc8568_mds_probe, - .setup_arch = mpc8568_mds_setup_arch, - .init_IRQ = mpc8568_mds_pic_init, +define_machine(mpc85xx_mds) { + .name = "MPC85xx MDS", + .probe = mpc85xx_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, .get_irq = mpic_get_irq, .restart = mpc85xx_restart, .calibrate_decr = generic_calibrate_decr,