mtd: nand: add support for diskonchip G4 nand flash device

This patch adds a driver for the M-Sys / Sandisk diskonchip G4 nand flash found
in various smartphones and PDAs, among them the Palm Treo680, HTC Prophet and
Wizard, Toshiba Portege G900, Asus P526, and O2 XDA Zinc.  It was tested on the
Treo 680, but should work generically.

Since v3, this patch adds power management functions, a scan of the factory bad
block table during initialization, several fixes, and more extensive testing.
Also, the platform data header file, which only contained partitioning
information, was removed.  Command-line partitioning can be used, at least until
an mtd parser is written for the saftl format with which these chips are
shipped.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Mike Dunn 2012-01-03 16:05:44 -08:00 committed by David Woodhouse
parent 58edc904bb
commit 570469f3bd
3 changed files with 1399 additions and 0 deletions

View file

@ -313,6 +313,26 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
load time (assuming you build diskonchip as a module) with the module
parameter "inftl_bbt_write=1".
config MTD_NAND_DOCG4
tristate "Support for DiskOnChip G4 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select BCH
select BITREVERSE
help
Support for diskonchip G4 nand flash, found in various smartphones and
PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba
Portege G900, Asus P526, and O2 XDA Zinc.
With this driver you will be able to use UBI and create a ubifs on the
device, so you may wish to consider enabling UBI and UBIFS as well.
These devices ship with the Mys/Sandisk SAFTL formatting, for which
there is currently no mtd parser, so you may want to use command line
partitioning to segregate write-protected blocks. On the Treo680, the
first five erase blocks (256KiB each) are write-protected, followed
by the block containing the saftl partition table. This is probably
typical.
config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on ARCH_PXA

View file

@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
obj-$(CONFIG_MTD_NAND_DOCG4) += docg4.o
obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o

1378
drivers/mtd/nand/docg4.c Normal file

File diff suppressed because it is too large Load diff