From 58a5559e461a4ab945286dacef611d3c542c5fee Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 16 Aug 2010 09:21:19 +0300 Subject: [PATCH] OMAP3: PM: ensure IO wakeups are properly disabled Commit 5a5f561 (convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes) mistakenly removed the check for PER when disabling the IO chain. During idle, if the PER powerdomain transitions into a lower state and CORE does not, the IO pad wakeups are not being disabled in the idle path after they are enabled. This can happen with the lower C-states when using CPUidle for example. This patch ensures that the check for disabling IO wakeups also checks for PER transitions, matching the check done to enable IO wakeups. Found when debugging PM/CPUidle related problems reported by Ameya Palande . Problems were triggered particularily on boards with UART2 consoles (n900, Overo) since UART2 is in the PER powerdomain. Tested on l-o master (omap3_defonfig + CONFIG_CPU_IDLE=y) as well as with current PM branch. Boards tested: n900, Overo, omap3evm. Cc: Paul Walmsley Cc: Ameya Palande Tested-by: Jarkko Nikula Signed-off-by: Kevin Hilman [tony@atomide.com: updated description to clarify the transistion] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm34xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fb4994ad622e..7b03426c72a3 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -480,7 +480,9 @@ void omap_sram_idle(void) } /* Disable IO-PAD and IO-CHAIN wakeup */ - if (omap3_has_io_wakeup() && core_next_state < PWRDM_POWER_ON) { + if (omap3_has_io_wakeup() && + (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON)) { prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_disable_io_chain(); }