MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.
These are the rest of the new files needed to add OCTEON processor support to the Linux kernel. Other than Makefile and Kconfig which should be obvious, we have: csrc-octeon.c -- Clock source driver for OCTEON. dma-octeon.c -- Helper functions for mapping DMA memory. flash_setup.c -- Register on-board flash with the MTD subsystem. octeon-irq.c -- OCTEON interrupt controller managment. octeon-memcpy.S -- Optimized memcpy() implementation. serial.c -- Register 8250 platform driver and early console. setup.c -- Early architecture initialization. smp.c -- OCTEON SMP support. octeon_switch.S -- Scheduler context switch for OCTEON. c-octeon.c -- OCTEON cache controller support. cex-oct.S -- OCTEON cache exception handler. asm/mach-cavium-octeon/*.h -- Architecture include files. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/cavium-octeon/Kconfig create mode 100644 arch/mips/cavium-octeon/Makefile create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c create mode 100644 arch/mips/cavium-octeon/dma-octeon.c create mode 100644 arch/mips/cavium-octeon/flash_setup.c create mode 100644 arch/mips/cavium-octeon/octeon-irq.c create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S create mode 100644 arch/mips/cavium-octeon/serial.c create mode 100644 arch/mips/cavium-octeon/setup.c create mode 100644 arch/mips/cavium-octeon/smp.c create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h create mode 100644 arch/mips/include/asm/octeon/octeon.h create mode 100644 arch/mips/kernel/octeon_switch.S create mode 100644 arch/mips/mm/c-octeon.c create mode 100644 arch/mips/mm/cex-oct.S
This commit is contained in:
parent
58f07778ce
commit
5b3b16880f
85
arch/mips/cavium-octeon/Kconfig
Normal file
85
arch/mips/cavium-octeon/Kconfig
Normal file
|
@ -0,0 +1,85 @@
|
|||
config CAVIUM_OCTEON_SPECIFIC_OPTIONS
|
||||
bool "Enable Octeon specific options"
|
||||
depends on CPU_CAVIUM_OCTEON
|
||||
default "y"
|
||||
|
||||
config CAVIUM_OCTEON_2ND_KERNEL
|
||||
bool "Build the kernel to be used as a 2nd kernel on the same chip"
|
||||
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
|
||||
default "n"
|
||||
help
|
||||
This option configures this kernel to be linked at a different
|
||||
address and use the 2nd uart for output. This allows a kernel built
|
||||
with this option to be run at the same time as one built without this
|
||||
option.
|
||||
|
||||
config CAVIUM_OCTEON_HW_FIX_UNALIGNED
|
||||
bool "Enable hardware fixups of unaligned loads and stores"
|
||||
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
|
||||
default "y"
|
||||
help
|
||||
Configure the Octeon hardware to automatically fix unaligned loads
|
||||
and stores. Normally unaligned accesses are fixed using a kernel
|
||||
exception handler. This option enables the hardware automatic fixups,
|
||||
which requires only an extra 3 cycles. Disable this option if you
|
||||
are running code that relies on address exceptions on unaligned
|
||||
accesses.
|
||||
|
||||
config CAVIUM_OCTEON_CVMSEG_SIZE
|
||||
int "Number of L1 cache lines reserved for CVMSEG memory"
|
||||
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
|
||||
range 0 54
|
||||
default 1
|
||||
help
|
||||
CVMSEG LM is a segment that accesses portions of the dcache as a
|
||||
local memory; the larger CVMSEG is, the smaller the cache is.
|
||||
This selects the size of CVMSEG LM, which is in cache blocks. The
|
||||
legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
|
||||
between zero and 6192 bytes).
|
||||
|
||||
config CAVIUM_OCTEON_LOCK_L2
|
||||
bool "Lock often used kernel code in the L2"
|
||||
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
|
||||
default "y"
|
||||
help
|
||||
Enable locking parts of the kernel into the L2 cache.
|
||||
|
||||
config CAVIUM_OCTEON_LOCK_L2_TLB
|
||||
bool "Lock the TLB handler in L2"
|
||||
depends on CAVIUM_OCTEON_LOCK_L2
|
||||
default "y"
|
||||
help
|
||||
Lock the low level TLB fast path into L2.
|
||||
|
||||
config CAVIUM_OCTEON_LOCK_L2_EXCEPTION
|
||||
bool "Lock the exception handler in L2"
|
||||
depends on CAVIUM_OCTEON_LOCK_L2
|
||||
default "y"
|
||||
help
|
||||
Lock the low level exception handler into L2.
|
||||
|
||||
config CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
|
||||
bool "Lock the interrupt handler in L2"
|
||||
depends on CAVIUM_OCTEON_LOCK_L2
|
||||
default "y"
|
||||
help
|
||||
Lock the low level interrupt handler into L2.
|
||||
|
||||
config CAVIUM_OCTEON_LOCK_L2_INTERRUPT
|
||||
bool "Lock the 2nd level interrupt handler in L2"
|
||||
depends on CAVIUM_OCTEON_LOCK_L2
|
||||
default "y"
|
||||
help
|
||||
Lock the 2nd level interrupt handler in L2.
|
||||
|
||||
config CAVIUM_OCTEON_LOCK_L2_MEMCPY
|
||||
bool "Lock memcpy() in L2"
|
||||
depends on CAVIUM_OCTEON_LOCK_L2
|
||||
default "y"
|
||||
help
|
||||
Lock the kernel's implementation of memcpy() into L2.
|
||||
|
||||
config ARCH_SPARSEMEM_ENABLE
|
||||
def_bool y
|
||||
select SPARSEMEM_STATIC
|
||||
depends on CPU_CAVIUM_OCTEON
|
16
arch/mips/cavium-octeon/Makefile
Normal file
16
arch/mips/cavium-octeon/Makefile
Normal file
|
@ -0,0 +1,16 @@
|
|||
#
|
||||
# Makefile for the Cavium Octeon specific kernel interface routines
|
||||
# under Linux.
|
||||
#
|
||||
# This file is subject to the terms and conditions of the GNU General Public
|
||||
# License. See the file "COPYING" in the main directory of this archive
|
||||
# for more details.
|
||||
#
|
||||
# Copyright (C) 2005-2008 Cavium Networks
|
||||
#
|
||||
|
||||
obj-y := setup.o serial.o octeon-irq.o csrc-octeon.o
|
||||
obj-y += dma-octeon.o flash_setup.o
|
||||
obj-y += octeon-memcpy.o
|
||||
|
||||
obj-$(CONFIG_SMP) += smp.o
|
58
arch/mips/cavium-octeon/csrc-octeon.c
Normal file
58
arch/mips/cavium-octeon/csrc-octeon.c
Normal file
|
@ -0,0 +1,58 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2007 by Ralf Baechle
|
||||
*/
|
||||
#include <linux/clocksource.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
#include <asm/octeon/cvmx-ipd-defs.h>
|
||||
|
||||
/*
|
||||
* Set the current core's cvmcount counter to the value of the
|
||||
* IPD_CLK_COUNT. We do this on all cores as they are brought
|
||||
* on-line. This allows for a read from a local cpu register to
|
||||
* access a synchronized counter.
|
||||
*
|
||||
*/
|
||||
void octeon_init_cvmcount(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
unsigned loops = 2;
|
||||
|
||||
/* Clobber loops so GCC will not unroll the following while loop. */
|
||||
asm("" : "+r" (loops));
|
||||
|
||||
local_irq_save(flags);
|
||||
/*
|
||||
* Loop several times so we are executing from the cache,
|
||||
* which should give more deterministic timing.
|
||||
*/
|
||||
while (loops--)
|
||||
write_c0_cvmcount(cvmx_read_csr(CVMX_IPD_CLK_COUNT));
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static cycle_t octeon_cvmcount_read(void)
|
||||
{
|
||||
return read_c0_cvmcount();
|
||||
}
|
||||
|
||||
static struct clocksource clocksource_mips = {
|
||||
.name = "OCTEON_CVMCOUNT",
|
||||
.read = octeon_cvmcount_read,
|
||||
.mask = CLOCKSOURCE_MASK(64),
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
void __init plat_time_init(void)
|
||||
{
|
||||
clocksource_mips.rating = 300;
|
||||
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
|
||||
clocksource_register(&clocksource_mips);
|
||||
}
|
32
arch/mips/cavium-octeon/dma-octeon.c
Normal file
32
arch/mips/cavium-octeon/dma-octeon.c
Normal file
|
@ -0,0 +1,32 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com>
|
||||
* Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org>
|
||||
* Copyright (C) 2005 Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
|
||||
* swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
|
||||
* IP32 changes by Ilya.
|
||||
* Cavium Networks: Create new dma setup for Cavium Networks Octeon based on
|
||||
* the kernels original.
|
||||
*/
|
||||
#include <linux/types.h>
|
||||
#include <linux/mm.h>
|
||||
|
||||
#include <dma-coherence.h>
|
||||
|
||||
dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
|
||||
{
|
||||
/* Without PCI/PCIe this function can be called for Octeon internal
|
||||
devices such as USB. These devices all support 64bit addressing */
|
||||
mb();
|
||||
return virt_to_phys(ptr);
|
||||
}
|
||||
|
||||
void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
|
||||
{
|
||||
/* Without PCI/PCIe this function can be called for Octeon internal
|
||||
* devices such as USB. These devices all support 64bit addressing */
|
||||
return;
|
||||
}
|
84
arch/mips/cavium-octeon/flash_setup.c
Normal file
84
arch/mips/cavium-octeon/flash_setup.c
Normal file
|
@ -0,0 +1,84 @@
|
|||
/*
|
||||
* Octeon Bootbus flash setup
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2007, 2008 Cavium Networks
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/map.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
|
||||
static struct map_info flash_map;
|
||||
static struct mtd_info *mymtd;
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static int nr_parts;
|
||||
static struct mtd_partition *parts;
|
||||
static const char *part_probe_types[] = {
|
||||
"cmdlinepart",
|
||||
#ifdef CONFIG_MTD_REDBOOT_PARTS
|
||||
"RedBoot",
|
||||
#endif
|
||||
NULL
|
||||
};
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Module/ driver initialization.
|
||||
*
|
||||
* Returns Zero on success
|
||||
*/
|
||||
static int __init flash_init(void)
|
||||
{
|
||||
/*
|
||||
* Read the bootbus region 0 setup to determine the base
|
||||
* address of the flash.
|
||||
*/
|
||||
union cvmx_mio_boot_reg_cfgx region_cfg;
|
||||
region_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(0));
|
||||
if (region_cfg.s.en) {
|
||||
/*
|
||||
* The bootloader always takes the flash and sets its
|
||||
* address so the entire flash fits below
|
||||
* 0x1fc00000. This way the flash aliases to
|
||||
* 0x1fc00000 for booting. Software can access the
|
||||
* full flash at the true address, while core boot can
|
||||
* access 4MB.
|
||||
*/
|
||||
/* Use this name so old part lines work */
|
||||
flash_map.name = "phys_mapped_flash";
|
||||
flash_map.phys = region_cfg.s.base << 16;
|
||||
flash_map.size = 0x1fc00000 - flash_map.phys;
|
||||
flash_map.bankwidth = 1;
|
||||
flash_map.virt = ioremap(flash_map.phys, flash_map.size);
|
||||
pr_notice("Bootbus flash: Setting flash for %luMB flash at "
|
||||
"0x%08lx\n", flash_map.size >> 20, flash_map.phys);
|
||||
simple_map_init(&flash_map);
|
||||
mymtd = do_map_probe("cfi_probe", &flash_map);
|
||||
if (mymtd) {
|
||||
mymtd->owner = THIS_MODULE;
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
nr_parts = parse_mtd_partitions(mymtd,
|
||||
part_probe_types,
|
||||
&parts, 0);
|
||||
if (nr_parts > 0)
|
||||
add_mtd_partitions(mymtd, parts, nr_parts);
|
||||
else
|
||||
add_mtd_device(mymtd);
|
||||
#else
|
||||
add_mtd_device(mymtd);
|
||||
#endif
|
||||
} else {
|
||||
pr_err("Failed to register MTD device for flash\n");
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
late_initcall(flash_init);
|
497
arch/mips/cavium-octeon/octeon-irq.c
Normal file
497
arch/mips/cavium-octeon/octeon-irq.c
Normal file
|
@ -0,0 +1,497 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004-2008 Cavium Networks
|
||||
*/
|
||||
#include <linux/irq.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/hardirq.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
|
||||
DEFINE_RWLOCK(octeon_irq_ciu0_rwlock);
|
||||
DEFINE_RWLOCK(octeon_irq_ciu1_rwlock);
|
||||
DEFINE_SPINLOCK(octeon_irq_msi_lock);
|
||||
|
||||
static void octeon_irq_core_ack(unsigned int irq)
|
||||
{
|
||||
unsigned int bit = irq - OCTEON_IRQ_SW0;
|
||||
/*
|
||||
* We don't need to disable IRQs to make these atomic since
|
||||
* they are already disabled earlier in the low level
|
||||
* interrupt code.
|
||||
*/
|
||||
clear_c0_status(0x100 << bit);
|
||||
/* The two user interrupts must be cleared manually. */
|
||||
if (bit < 2)
|
||||
clear_c0_cause(0x100 << bit);
|
||||
}
|
||||
|
||||
static void octeon_irq_core_eoi(unsigned int irq)
|
||||
{
|
||||
irq_desc_t *desc = irq_desc + irq;
|
||||
unsigned int bit = irq - OCTEON_IRQ_SW0;
|
||||
/*
|
||||
* If an IRQ is being processed while we are disabling it the
|
||||
* handler will attempt to unmask the interrupt after it has
|
||||
* been disabled.
|
||||
*/
|
||||
if (desc->status & IRQ_DISABLED)
|
||||
return;
|
||||
|
||||
/* There is a race here. We should fix it. */
|
||||
|
||||
/*
|
||||
* We don't need to disable IRQs to make these atomic since
|
||||
* they are already disabled earlier in the low level
|
||||
* interrupt code.
|
||||
*/
|
||||
set_c0_status(0x100 << bit);
|
||||
}
|
||||
|
||||
static void octeon_irq_core_enable(unsigned int irq)
|
||||
{
|
||||
unsigned long flags;
|
||||
unsigned int bit = irq - OCTEON_IRQ_SW0;
|
||||
|
||||
/*
|
||||
* We need to disable interrupts to make sure our updates are
|
||||
* atomic.
|
||||
*/
|
||||
local_irq_save(flags);
|
||||
set_c0_status(0x100 << bit);
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static void octeon_irq_core_disable_local(unsigned int irq)
|
||||
{
|
||||
unsigned long flags;
|
||||
unsigned int bit = irq - OCTEON_IRQ_SW0;
|
||||
/*
|
||||
* We need to disable interrupts to make sure our updates are
|
||||
* atomic.
|
||||
*/
|
||||
local_irq_save(flags);
|
||||
clear_c0_status(0x100 << bit);
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static void octeon_irq_core_disable(unsigned int irq)
|
||||
{
|
||||
#ifdef CONFIG_SMP
|
||||
on_each_cpu((void (*)(void *)) octeon_irq_core_disable_local,
|
||||
(void *) (long) irq, 1);
|
||||
#else
|
||||
octeon_irq_core_disable_local(irq);
|
||||
#endif
|
||||
}
|
||||
|
||||
static struct irq_chip octeon_irq_chip_core = {
|
||||
.name = "Core",
|
||||
.enable = octeon_irq_core_enable,
|
||||
.disable = octeon_irq_core_disable,
|
||||
.ack = octeon_irq_core_ack,
|
||||
.eoi = octeon_irq_core_eoi,
|
||||
};
|
||||
|
||||
|
||||
static void octeon_irq_ciu0_ack(unsigned int irq)
|
||||
{
|
||||
/*
|
||||
* In order to avoid any locking accessing the CIU, we
|
||||
* acknowledge CIU interrupts by disabling all of them. This
|
||||
* way we can use a per core register and avoid any out of
|
||||
* core locking requirements. This has the side affect that
|
||||
* CIU interrupts can't be processed recursively.
|
||||
*
|
||||
* We don't need to disable IRQs to make these atomic since
|
||||
* they are already disabled earlier in the low level
|
||||
* interrupt code.
|
||||
*/
|
||||
clear_c0_status(0x100 << 2);
|
||||
}
|
||||
|
||||
static void octeon_irq_ciu0_eoi(unsigned int irq)
|
||||
{
|
||||
/*
|
||||
* Enable all CIU interrupts again. We don't need to disable
|
||||
* IRQs to make these atomic since they are already disabled
|
||||
* earlier in the low level interrupt code.
|
||||
*/
|
||||
set_c0_status(0x100 << 2);
|
||||
}
|
||||
|
||||
static void octeon_irq_ciu0_enable(unsigned int irq)
|
||||
{
|
||||
int coreid = cvmx_get_core_num();
|
||||
unsigned long flags;
|
||||
uint64_t en0;
|
||||
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
|
||||
|
||||
/*
|
||||
* A read lock is used here to make sure only one core is ever
|
||||
* updating the CIU enable bits at a time. During an enable
|
||||
* the cores don't interfere with each other. During a disable
|
||||
* the write lock stops any enables that might cause a
|
||||
* problem.
|
||||
*/
|
||||
read_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
|
||||
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
|
||||
en0 |= 1ull << bit;
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
|
||||
read_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
|
||||
}
|
||||
|
||||
static void octeon_irq_ciu0_disable(unsigned int irq)
|
||||
{
|
||||
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
|
||||
unsigned long flags;
|
||||
uint64_t en0;
|
||||
#ifdef CONFIG_SMP
|
||||
int cpu;
|
||||
write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
|
||||
for_each_online_cpu(cpu) {
|
||||
int coreid = cpu_logical_map(cpu);
|
||||
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
|
||||
en0 &= ~(1ull << bit);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
|
||||
}
|
||||
/*
|
||||
* We need to do a read after the last update to make sure all
|
||||
* of them are done.
|
||||
*/
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
|
||||
write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
|
||||
#else
|
||||
int coreid = cvmx_get_core_num();
|
||||
local_irq_save(flags);
|
||||
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
|
||||
en0 &= ~(1ull << bit);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
|
||||
local_irq_restore(flags);
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
|
||||
{
|
||||
int cpu;
|
||||
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
|
||||
|
||||
write_lock(&octeon_irq_ciu0_rwlock);
|
||||
for_each_online_cpu(cpu) {
|
||||
int coreid = cpu_logical_map(cpu);
|
||||
uint64_t en0 =
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
|
||||
if (cpumask_test_cpu(cpu, dest))
|
||||
en0 |= 1ull << bit;
|
||||
else
|
||||
en0 &= ~(1ull << bit);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
|
||||
}
|
||||
/*
|
||||
* We need to do a read after the last update to make sure all
|
||||
* of them are done.
|
||||
*/
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
|
||||
write_unlock(&octeon_irq_ciu0_rwlock);
|
||||
}
|
||||
#endif
|
||||
|
||||
static struct irq_chip octeon_irq_chip_ciu0 = {
|
||||
.name = "CIU0",
|
||||
.enable = octeon_irq_ciu0_enable,
|
||||
.disable = octeon_irq_ciu0_disable,
|
||||
.ack = octeon_irq_ciu0_ack,
|
||||
.eoi = octeon_irq_ciu0_eoi,
|
||||
#ifdef CONFIG_SMP
|
||||
.set_affinity = octeon_irq_ciu0_set_affinity,
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
static void octeon_irq_ciu1_ack(unsigned int irq)
|
||||
{
|
||||
/*
|
||||
* In order to avoid any locking accessing the CIU, we
|
||||
* acknowledge CIU interrupts by disabling all of them. This
|
||||
* way we can use a per core register and avoid any out of
|
||||
* core locking requirements. This has the side affect that
|
||||
* CIU interrupts can't be processed recursively. We don't
|
||||
* need to disable IRQs to make these atomic since they are
|
||||
* already disabled earlier in the low level interrupt code.
|
||||
*/
|
||||
clear_c0_status(0x100 << 3);
|
||||
}
|
||||
|
||||
static void octeon_irq_ciu1_eoi(unsigned int irq)
|
||||
{
|
||||
/*
|
||||
* Enable all CIU interrupts again. We don't need to disable
|
||||
* IRQs to make these atomic since they are already disabled
|
||||
* earlier in the low level interrupt code.
|
||||
*/
|
||||
set_c0_status(0x100 << 3);
|
||||
}
|
||||
|
||||
static void octeon_irq_ciu1_enable(unsigned int irq)
|
||||
{
|
||||
int coreid = cvmx_get_core_num();
|
||||
unsigned long flags;
|
||||
uint64_t en1;
|
||||
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
|
||||
|
||||
/*
|
||||
* A read lock is used here to make sure only one core is ever
|
||||
* updating the CIU enable bits at a time. During an enable
|
||||
* the cores don't interfere with each other. During a disable
|
||||
* the write lock stops any enables that might cause a
|
||||
* problem.
|
||||
*/
|
||||
read_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
|
||||
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
|
||||
en1 |= 1ull << bit;
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
|
||||
read_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
|
||||
}
|
||||
|
||||
static void octeon_irq_ciu1_disable(unsigned int irq)
|
||||
{
|
||||
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
|
||||
unsigned long flags;
|
||||
uint64_t en1;
|
||||
#ifdef CONFIG_SMP
|
||||
int cpu;
|
||||
write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
|
||||
for_each_online_cpu(cpu) {
|
||||
int coreid = cpu_logical_map(cpu);
|
||||
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
|
||||
en1 &= ~(1ull << bit);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
|
||||
}
|
||||
/*
|
||||
* We need to do a read after the last update to make sure all
|
||||
* of them are done.
|
||||
*/
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
|
||||
write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
|
||||
#else
|
||||
int coreid = cvmx_get_core_num();
|
||||
local_irq_save(flags);
|
||||
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
|
||||
en1 &= ~(1ull << bit);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
|
||||
local_irq_restore(flags);
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
|
||||
{
|
||||
int cpu;
|
||||
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
|
||||
|
||||
write_lock(&octeon_irq_ciu1_rwlock);
|
||||
for_each_online_cpu(cpu) {
|
||||
int coreid = cpu_logical_map(cpu);
|
||||
uint64_t en1 =
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN1
|
||||
(coreid * 2 + 1));
|
||||
if (cpumask_test_cpu(cpu, dest))
|
||||
en1 |= 1ull << bit;
|
||||
else
|
||||
en1 &= ~(1ull << bit);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
|
||||
}
|
||||
/*
|
||||
* We need to do a read after the last update to make sure all
|
||||
* of them are done.
|
||||
*/
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
|
||||
write_unlock(&octeon_irq_ciu1_rwlock);
|
||||
}
|
||||
#endif
|
||||
|
||||
static struct irq_chip octeon_irq_chip_ciu1 = {
|
||||
.name = "CIU1",
|
||||
.enable = octeon_irq_ciu1_enable,
|
||||
.disable = octeon_irq_ciu1_disable,
|
||||
.ack = octeon_irq_ciu1_ack,
|
||||
.eoi = octeon_irq_ciu1_eoi,
|
||||
#ifdef CONFIG_SMP
|
||||
.set_affinity = octeon_irq_ciu1_set_affinity,
|
||||
#endif
|
||||
};
|
||||
|
||||
#ifdef CONFIG_PCI_MSI
|
||||
|
||||
static void octeon_irq_msi_ack(unsigned int irq)
|
||||
{
|
||||
if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
|
||||
/* These chips have PCI */
|
||||
cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV,
|
||||
1ull << (irq - OCTEON_IRQ_MSI_BIT0));
|
||||
} else {
|
||||
/*
|
||||
* These chips have PCIe. Thankfully the ACK doesn't
|
||||
* need any locking.
|
||||
*/
|
||||
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0,
|
||||
1ull << (irq - OCTEON_IRQ_MSI_BIT0));
|
||||
}
|
||||
}
|
||||
|
||||
static void octeon_irq_msi_eoi(unsigned int irq)
|
||||
{
|
||||
/* Nothing needed */
|
||||
}
|
||||
|
||||
static void octeon_irq_msi_enable(unsigned int irq)
|
||||
{
|
||||
if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
|
||||
/*
|
||||
* Octeon PCI doesn't have the ability to mask/unmask
|
||||
* MSI interrupts individually. Instead of
|
||||
* masking/unmasking them in groups of 16, we simple
|
||||
* assume MSI devices are well behaved. MSI
|
||||
* interrupts are always enable and the ACK is assumed
|
||||
* to be enough.
|
||||
*/
|
||||
} else {
|
||||
/* These chips have PCIe. Note that we only support
|
||||
* the first 64 MSI interrupts. Unfortunately all the
|
||||
* MSI enables are in the same register. We use
|
||||
* MSI0's lock to control access to them all.
|
||||
*/
|
||||
uint64_t en;
|
||||
unsigned long flags;
|
||||
spin_lock_irqsave(&octeon_irq_msi_lock, flags);
|
||||
en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
|
||||
en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0);
|
||||
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
|
||||
cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
|
||||
spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
|
||||
}
|
||||
}
|
||||
|
||||
static void octeon_irq_msi_disable(unsigned int irq)
|
||||
{
|
||||
if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
|
||||
/* See comment in enable */
|
||||
} else {
|
||||
/*
|
||||
* These chips have PCIe. Note that we only support
|
||||
* the first 64 MSI interrupts. Unfortunately all the
|
||||
* MSI enables are in the same register. We use
|
||||
* MSI0's lock to control access to them all.
|
||||
*/
|
||||
uint64_t en;
|
||||
unsigned long flags;
|
||||
spin_lock_irqsave(&octeon_irq_msi_lock, flags);
|
||||
en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
|
||||
en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0));
|
||||
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
|
||||
cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
|
||||
spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
|
||||
}
|
||||
}
|
||||
|
||||
static struct irq_chip octeon_irq_chip_msi = {
|
||||
.name = "MSI",
|
||||
.enable = octeon_irq_msi_enable,
|
||||
.disable = octeon_irq_msi_disable,
|
||||
.ack = octeon_irq_msi_ack,
|
||||
.eoi = octeon_irq_msi_eoi,
|
||||
};
|
||||
#endif
|
||||
|
||||
void __init arch_init_irq(void)
|
||||
{
|
||||
int irq;
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
/* Set the default affinity to the boot cpu. */
|
||||
cpumask_clear(irq_default_affinity);
|
||||
cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
|
||||
#endif
|
||||
|
||||
if (NR_IRQS < OCTEON_IRQ_LAST)
|
||||
pr_err("octeon_irq_init: NR_IRQS is set too low\n");
|
||||
|
||||
/* 0 - 15 reserved for i8259 master and slave controller. */
|
||||
|
||||
/* 17 - 23 Mips internal */
|
||||
for (irq = OCTEON_IRQ_SW0; irq <= OCTEON_IRQ_TIMER; irq++) {
|
||||
set_irq_chip_and_handler(irq, &octeon_irq_chip_core,
|
||||
handle_percpu_irq);
|
||||
}
|
||||
|
||||
/* 24 - 87 CIU_INT_SUM0 */
|
||||
for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
|
||||
set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu0,
|
||||
handle_percpu_irq);
|
||||
}
|
||||
|
||||
/* 88 - 151 CIU_INT_SUM1 */
|
||||
for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_RESERVED151; irq++) {
|
||||
set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu1,
|
||||
handle_percpu_irq);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PCI_MSI
|
||||
/* 152 - 215 PCI/PCIe MSI interrupts */
|
||||
for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_BIT63; irq++) {
|
||||
set_irq_chip_and_handler(irq, &octeon_irq_chip_msi,
|
||||
handle_percpu_irq);
|
||||
}
|
||||
#endif
|
||||
set_c0_status(0x300 << 2);
|
||||
}
|
||||
|
||||
asmlinkage void plat_irq_dispatch(void)
|
||||
{
|
||||
const unsigned long core_id = cvmx_get_core_num();
|
||||
const uint64_t ciu_sum0_address = CVMX_CIU_INTX_SUM0(core_id * 2);
|
||||
const uint64_t ciu_en0_address = CVMX_CIU_INTX_EN0(core_id * 2);
|
||||
const uint64_t ciu_sum1_address = CVMX_CIU_INT_SUM1;
|
||||
const uint64_t ciu_en1_address = CVMX_CIU_INTX_EN1(core_id * 2 + 1);
|
||||
unsigned long cop0_cause;
|
||||
unsigned long cop0_status;
|
||||
uint64_t ciu_en;
|
||||
uint64_t ciu_sum;
|
||||
|
||||
while (1) {
|
||||
cop0_cause = read_c0_cause();
|
||||
cop0_status = read_c0_status();
|
||||
cop0_cause &= cop0_status;
|
||||
cop0_cause &= ST0_IM;
|
||||
|
||||
if (unlikely(cop0_cause & STATUSF_IP2)) {
|
||||
ciu_sum = cvmx_read_csr(ciu_sum0_address);
|
||||
ciu_en = cvmx_read_csr(ciu_en0_address);
|
||||
ciu_sum &= ciu_en;
|
||||
if (likely(ciu_sum))
|
||||
do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WORKQ0 - 1);
|
||||
else
|
||||
spurious_interrupt();
|
||||
} else if (unlikely(cop0_cause & STATUSF_IP3)) {
|
||||
ciu_sum = cvmx_read_csr(ciu_sum1_address);
|
||||
ciu_en = cvmx_read_csr(ciu_en1_address);
|
||||
ciu_sum &= ciu_en;
|
||||
if (likely(ciu_sum))
|
||||
do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WDOG0 - 1);
|
||||
else
|
||||
spurious_interrupt();
|
||||
} else if (likely(cop0_cause)) {
|
||||
do_IRQ(fls(cop0_cause) - 9 + MIPS_CPU_IRQ_BASE);
|
||||
} else {
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
521
arch/mips/cavium-octeon/octeon-memcpy.S
Normal file
521
arch/mips/cavium-octeon/octeon-memcpy.S
Normal file
|
@ -0,0 +1,521 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Unified implementation of memcpy, memmove and the __copy_user backend.
|
||||
*
|
||||
* Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
|
||||
* Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
|
||||
* Copyright (C) 2002 Broadcom, Inc.
|
||||
* memcpy/copy_user author: Mark Vandevoorde
|
||||
*
|
||||
* Mnemonic names for arguments to memcpy/__copy_user
|
||||
*/
|
||||
|
||||
#include <asm/asm.h>
|
||||
#include <asm/asm-offsets.h>
|
||||
#include <asm/regdef.h>
|
||||
|
||||
#define dst a0
|
||||
#define src a1
|
||||
#define len a2
|
||||
|
||||
/*
|
||||
* Spec
|
||||
*
|
||||
* memcpy copies len bytes from src to dst and sets v0 to dst.
|
||||
* It assumes that
|
||||
* - src and dst don't overlap
|
||||
* - src is readable
|
||||
* - dst is writable
|
||||
* memcpy uses the standard calling convention
|
||||
*
|
||||
* __copy_user copies up to len bytes from src to dst and sets a2 (len) to
|
||||
* the number of uncopied bytes due to an exception caused by a read or write.
|
||||
* __copy_user assumes that src and dst don't overlap, and that the call is
|
||||
* implementing one of the following:
|
||||
* copy_to_user
|
||||
* - src is readable (no exceptions when reading src)
|
||||
* copy_from_user
|
||||
* - dst is writable (no exceptions when writing dst)
|
||||
* __copy_user uses a non-standard calling convention; see
|
||||
* arch/mips/include/asm/uaccess.h
|
||||
*
|
||||
* When an exception happens on a load, the handler must
|
||||
# ensure that all of the destination buffer is overwritten to prevent
|
||||
* leaking information to user mode programs.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Implementation
|
||||
*/
|
||||
|
||||
/*
|
||||
* The exception handler for loads requires that:
|
||||
* 1- AT contain the address of the byte just past the end of the source
|
||||
* of the copy,
|
||||
* 2- src_entry <= src < AT, and
|
||||
* 3- (dst - src) == (dst_entry - src_entry),
|
||||
* The _entry suffix denotes values when __copy_user was called.
|
||||
*
|
||||
* (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
|
||||
* (2) is met by incrementing src by the number of bytes copied
|
||||
* (3) is met by not doing loads between a pair of increments of dst and src
|
||||
*
|
||||
* The exception handlers for stores adjust len (if necessary) and return.
|
||||
* These handlers do not need to overwrite any data.
|
||||
*
|
||||
* For __rmemcpy and memmove an exception is always a kernel bug, therefore
|
||||
* they're not protected.
|
||||
*/
|
||||
|
||||
#define EXC(inst_reg,addr,handler) \
|
||||
9: inst_reg, addr; \
|
||||
.section __ex_table,"a"; \
|
||||
PTR 9b, handler; \
|
||||
.previous
|
||||
|
||||
/*
|
||||
* Only on the 64-bit kernel we can made use of 64-bit registers.
|
||||
*/
|
||||
#ifdef CONFIG_64BIT
|
||||
#define USE_DOUBLE
|
||||
#endif
|
||||
|
||||
#ifdef USE_DOUBLE
|
||||
|
||||
#define LOAD ld
|
||||
#define LOADL ldl
|
||||
#define LOADR ldr
|
||||
#define STOREL sdl
|
||||
#define STORER sdr
|
||||
#define STORE sd
|
||||
#define ADD daddu
|
||||
#define SUB dsubu
|
||||
#define SRL dsrl
|
||||
#define SRA dsra
|
||||
#define SLL dsll
|
||||
#define SLLV dsllv
|
||||
#define SRLV dsrlv
|
||||
#define NBYTES 8
|
||||
#define LOG_NBYTES 3
|
||||
|
||||
/*
|
||||
* As we are sharing code base with the mips32 tree (which use the o32 ABI
|
||||
* register definitions). We need to redefine the register definitions from
|
||||
* the n64 ABI register naming to the o32 ABI register naming.
|
||||
*/
|
||||
#undef t0
|
||||
#undef t1
|
||||
#undef t2
|
||||
#undef t3
|
||||
#define t0 $8
|
||||
#define t1 $9
|
||||
#define t2 $10
|
||||
#define t3 $11
|
||||
#define t4 $12
|
||||
#define t5 $13
|
||||
#define t6 $14
|
||||
#define t7 $15
|
||||
|
||||
#else
|
||||
|
||||
#define LOAD lw
|
||||
#define LOADL lwl
|
||||
#define LOADR lwr
|
||||
#define STOREL swl
|
||||
#define STORER swr
|
||||
#define STORE sw
|
||||
#define ADD addu
|
||||
#define SUB subu
|
||||
#define SRL srl
|
||||
#define SLL sll
|
||||
#define SRA sra
|
||||
#define SLLV sllv
|
||||
#define SRLV srlv
|
||||
#define NBYTES 4
|
||||
#define LOG_NBYTES 2
|
||||
|
||||
#endif /* USE_DOUBLE */
|
||||
|
||||
#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
||||
#define LDFIRST LOADR
|
||||
#define LDREST LOADL
|
||||
#define STFIRST STORER
|
||||
#define STREST STOREL
|
||||
#define SHIFT_DISCARD SLLV
|
||||
#else
|
||||
#define LDFIRST LOADL
|
||||
#define LDREST LOADR
|
||||
#define STFIRST STOREL
|
||||
#define STREST STORER
|
||||
#define SHIFT_DISCARD SRLV
|
||||
#endif
|
||||
|
||||
#define FIRST(unit) ((unit)*NBYTES)
|
||||
#define REST(unit) (FIRST(unit)+NBYTES-1)
|
||||
#define UNIT(unit) FIRST(unit)
|
||||
|
||||
#define ADDRMASK (NBYTES-1)
|
||||
|
||||
.text
|
||||
.set noreorder
|
||||
.set noat
|
||||
|
||||
/*
|
||||
* A combined memcpy/__copy_user
|
||||
* __copy_user sets len to 0 for success; else to an upper bound of
|
||||
* the number of uncopied bytes.
|
||||
* memcpy sets v0 to dst.
|
||||
*/
|
||||
.align 5
|
||||
LEAF(memcpy) /* a0=dst a1=src a2=len */
|
||||
move v0, dst /* return value */
|
||||
__memcpy:
|
||||
FEXPORT(__copy_user)
|
||||
/*
|
||||
* Note: dst & src may be unaligned, len may be 0
|
||||
* Temps
|
||||
*/
|
||||
#
|
||||
# Octeon doesn't care if the destination is unaligned. The hardware
|
||||
# can fix it faster than we can special case the assembly.
|
||||
#
|
||||
pref 0, 0(src)
|
||||
sltu t0, len, NBYTES # Check if < 1 word
|
||||
bnez t0, copy_bytes_checklen
|
||||
and t0, src, ADDRMASK # Check if src unaligned
|
||||
bnez t0, src_unaligned
|
||||
sltu t0, len, 4*NBYTES # Check if < 4 words
|
||||
bnez t0, less_than_4units
|
||||
sltu t0, len, 8*NBYTES # Check if < 8 words
|
||||
bnez t0, less_than_8units
|
||||
sltu t0, len, 16*NBYTES # Check if < 16 words
|
||||
bnez t0, cleanup_both_aligned
|
||||
sltu t0, len, 128+1 # Check if len < 129
|
||||
bnez t0, 1f # Skip prefetch if len is too short
|
||||
sltu t0, len, 256+1 # Check if len < 257
|
||||
bnez t0, 1f # Skip prefetch if len is too short
|
||||
pref 0, 128(src) # We must not prefetch invalid addresses
|
||||
#
|
||||
# This is where we loop if there is more than 128 bytes left
|
||||
2: pref 0, 256(src) # We must not prefetch invalid addresses
|
||||
#
|
||||
# This is where we loop if we can't prefetch anymore
|
||||
1:
|
||||
EXC( LOAD t0, UNIT(0)(src), l_exc)
|
||||
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
|
||||
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
|
||||
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
|
||||
SUB len, len, 16*NBYTES
|
||||
EXC( STORE t0, UNIT(0)(dst), s_exc_p16u)
|
||||
EXC( STORE t1, UNIT(1)(dst), s_exc_p15u)
|
||||
EXC( STORE t2, UNIT(2)(dst), s_exc_p14u)
|
||||
EXC( STORE t3, UNIT(3)(dst), s_exc_p13u)
|
||||
EXC( LOAD t0, UNIT(4)(src), l_exc_copy)
|
||||
EXC( LOAD t1, UNIT(5)(src), l_exc_copy)
|
||||
EXC( LOAD t2, UNIT(6)(src), l_exc_copy)
|
||||
EXC( LOAD t3, UNIT(7)(src), l_exc_copy)
|
||||
EXC( STORE t0, UNIT(4)(dst), s_exc_p12u)
|
||||
EXC( STORE t1, UNIT(5)(dst), s_exc_p11u)
|
||||
EXC( STORE t2, UNIT(6)(dst), s_exc_p10u)
|
||||
ADD src, src, 16*NBYTES
|
||||
EXC( STORE t3, UNIT(7)(dst), s_exc_p9u)
|
||||
ADD dst, dst, 16*NBYTES
|
||||
EXC( LOAD t0, UNIT(-8)(src), l_exc_copy)
|
||||
EXC( LOAD t1, UNIT(-7)(src), l_exc_copy)
|
||||
EXC( LOAD t2, UNIT(-6)(src), l_exc_copy)
|
||||
EXC( LOAD t3, UNIT(-5)(src), l_exc_copy)
|
||||
EXC( STORE t0, UNIT(-8)(dst), s_exc_p8u)
|
||||
EXC( STORE t1, UNIT(-7)(dst), s_exc_p7u)
|
||||
EXC( STORE t2, UNIT(-6)(dst), s_exc_p6u)
|
||||
EXC( STORE t3, UNIT(-5)(dst), s_exc_p5u)
|
||||
EXC( LOAD t0, UNIT(-4)(src), l_exc_copy)
|
||||
EXC( LOAD t1, UNIT(-3)(src), l_exc_copy)
|
||||
EXC( LOAD t2, UNIT(-2)(src), l_exc_copy)
|
||||
EXC( LOAD t3, UNIT(-1)(src), l_exc_copy)
|
||||
EXC( STORE t0, UNIT(-4)(dst), s_exc_p4u)
|
||||
EXC( STORE t1, UNIT(-3)(dst), s_exc_p3u)
|
||||
EXC( STORE t2, UNIT(-2)(dst), s_exc_p2u)
|
||||
EXC( STORE t3, UNIT(-1)(dst), s_exc_p1u)
|
||||
sltu t0, len, 256+1 # See if we can prefetch more
|
||||
beqz t0, 2b
|
||||
sltu t0, len, 128 # See if we can loop more time
|
||||
beqz t0, 1b
|
||||
nop
|
||||
#
|
||||
# Jump here if there are less than 16*NBYTES left.
|
||||
#
|
||||
cleanup_both_aligned:
|
||||
beqz len, done
|
||||
sltu t0, len, 8*NBYTES
|
||||
bnez t0, less_than_8units
|
||||
nop
|
||||
EXC( LOAD t0, UNIT(0)(src), l_exc)
|
||||
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
|
||||
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
|
||||
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
|
||||
SUB len, len, 8*NBYTES
|
||||
EXC( STORE t0, UNIT(0)(dst), s_exc_p8u)
|
||||
EXC( STORE t1, UNIT(1)(dst), s_exc_p7u)
|
||||
EXC( STORE t2, UNIT(2)(dst), s_exc_p6u)
|
||||
EXC( STORE t3, UNIT(3)(dst), s_exc_p5u)
|
||||
EXC( LOAD t0, UNIT(4)(src), l_exc_copy)
|
||||
EXC( LOAD t1, UNIT(5)(src), l_exc_copy)
|
||||
EXC( LOAD t2, UNIT(6)(src), l_exc_copy)
|
||||
EXC( LOAD t3, UNIT(7)(src), l_exc_copy)
|
||||
EXC( STORE t0, UNIT(4)(dst), s_exc_p4u)
|
||||
EXC( STORE t1, UNIT(5)(dst), s_exc_p3u)
|
||||
EXC( STORE t2, UNIT(6)(dst), s_exc_p2u)
|
||||
EXC( STORE t3, UNIT(7)(dst), s_exc_p1u)
|
||||
ADD src, src, 8*NBYTES
|
||||
beqz len, done
|
||||
ADD dst, dst, 8*NBYTES
|
||||
#
|
||||
# Jump here if there are less than 8*NBYTES left.
|
||||
#
|
||||
less_than_8units:
|
||||
sltu t0, len, 4*NBYTES
|
||||
bnez t0, less_than_4units
|
||||
nop
|
||||
EXC( LOAD t0, UNIT(0)(src), l_exc)
|
||||
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
|
||||
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
|
||||
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
|
||||
SUB len, len, 4*NBYTES
|
||||
EXC( STORE t0, UNIT(0)(dst), s_exc_p4u)
|
||||
EXC( STORE t1, UNIT(1)(dst), s_exc_p3u)
|
||||
EXC( STORE t2, UNIT(2)(dst), s_exc_p2u)
|
||||
EXC( STORE t3, UNIT(3)(dst), s_exc_p1u)
|
||||
ADD src, src, 4*NBYTES
|
||||
beqz len, done
|
||||
ADD dst, dst, 4*NBYTES
|
||||
#
|
||||
# Jump here if there are less than 4*NBYTES left. This means
|
||||
# we may need to copy up to 3 NBYTES words.
|
||||
#
|
||||
less_than_4units:
|
||||
sltu t0, len, 1*NBYTES
|
||||
bnez t0, copy_bytes_checklen
|
||||
nop
|
||||
#
|
||||
# 1) Copy NBYTES, then check length again
|
||||
#
|
||||
EXC( LOAD t0, 0(src), l_exc)
|
||||
SUB len, len, NBYTES
|
||||
sltu t1, len, 8
|
||||
EXC( STORE t0, 0(dst), s_exc_p1u)
|
||||
ADD src, src, NBYTES
|
||||
bnez t1, copy_bytes_checklen
|
||||
ADD dst, dst, NBYTES
|
||||
#
|
||||
# 2) Copy NBYTES, then check length again
|
||||
#
|
||||
EXC( LOAD t0, 0(src), l_exc)
|
||||
SUB len, len, NBYTES
|
||||
sltu t1, len, 8
|
||||
EXC( STORE t0, 0(dst), s_exc_p1u)
|
||||
ADD src, src, NBYTES
|
||||
bnez t1, copy_bytes_checklen
|
||||
ADD dst, dst, NBYTES
|
||||
#
|
||||
# 3) Copy NBYTES, then check length again
|
||||
#
|
||||
EXC( LOAD t0, 0(src), l_exc)
|
||||
SUB len, len, NBYTES
|
||||
ADD src, src, NBYTES
|
||||
ADD dst, dst, NBYTES
|
||||
b copy_bytes_checklen
|
||||
EXC( STORE t0, -8(dst), s_exc_p1u)
|
||||
|
||||
src_unaligned:
|
||||
#define rem t8
|
||||
SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
|
||||
beqz t0, cleanup_src_unaligned
|
||||
and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
|
||||
1:
|
||||
/*
|
||||
* Avoid consecutive LD*'s to the same register since some mips
|
||||
* implementations can't issue them in the same cycle.
|
||||
* It's OK to load FIRST(N+1) before REST(N) because the two addresses
|
||||
* are to the same unit (unless src is aligned, but it's not).
|
||||
*/
|
||||
EXC( LDFIRST t0, FIRST(0)(src), l_exc)
|
||||
EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy)
|
||||
SUB len, len, 4*NBYTES
|
||||
EXC( LDREST t0, REST(0)(src), l_exc_copy)
|
||||
EXC( LDREST t1, REST(1)(src), l_exc_copy)
|
||||
EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy)
|
||||
EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy)
|
||||
EXC( LDREST t2, REST(2)(src), l_exc_copy)
|
||||
EXC( LDREST t3, REST(3)(src), l_exc_copy)
|
||||
ADD src, src, 4*NBYTES
|
||||
EXC( STORE t0, UNIT(0)(dst), s_exc_p4u)
|
||||
EXC( STORE t1, UNIT(1)(dst), s_exc_p3u)
|
||||
EXC( STORE t2, UNIT(2)(dst), s_exc_p2u)
|
||||
EXC( STORE t3, UNIT(3)(dst), s_exc_p1u)
|
||||
bne len, rem, 1b
|
||||
ADD dst, dst, 4*NBYTES
|
||||
|
||||
cleanup_src_unaligned:
|
||||
beqz len, done
|
||||
and rem, len, NBYTES-1 # rem = len % NBYTES
|
||||
beq rem, len, copy_bytes
|
||||
nop
|
||||
1:
|
||||
EXC( LDFIRST t0, FIRST(0)(src), l_exc)
|
||||
EXC( LDREST t0, REST(0)(src), l_exc_copy)
|
||||
SUB len, len, NBYTES
|
||||
EXC( STORE t0, 0(dst), s_exc_p1u)
|
||||
ADD src, src, NBYTES
|
||||
bne len, rem, 1b
|
||||
ADD dst, dst, NBYTES
|
||||
|
||||
copy_bytes_checklen:
|
||||
beqz len, done
|
||||
nop
|
||||
copy_bytes:
|
||||
/* 0 < len < NBYTES */
|
||||
#define COPY_BYTE(N) \
|
||||
EXC( lb t0, N(src), l_exc); \
|
||||
SUB len, len, 1; \
|
||||
beqz len, done; \
|
||||
EXC( sb t0, N(dst), s_exc_p1)
|
||||
|
||||
COPY_BYTE(0)
|
||||
COPY_BYTE(1)
|
||||
#ifdef USE_DOUBLE
|
||||
COPY_BYTE(2)
|
||||
COPY_BYTE(3)
|
||||
COPY_BYTE(4)
|
||||
COPY_BYTE(5)
|
||||
#endif
|
||||
EXC( lb t0, NBYTES-2(src), l_exc)
|
||||
SUB len, len, 1
|
||||
jr ra
|
||||
EXC( sb t0, NBYTES-2(dst), s_exc_p1)
|
||||
done:
|
||||
jr ra
|
||||
nop
|
||||
END(memcpy)
|
||||
|
||||
l_exc_copy:
|
||||
/*
|
||||
* Copy bytes from src until faulting load address (or until a
|
||||
* lb faults)
|
||||
*
|
||||
* When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
|
||||
* may be more than a byte beyond the last address.
|
||||
* Hence, the lb below may get an exception.
|
||||
*
|
||||
* Assumes src < THREAD_BUADDR($28)
|
||||
*/
|
||||
LOAD t0, TI_TASK($28)
|
||||
nop
|
||||
LOAD t0, THREAD_BUADDR(t0)
|
||||
1:
|
||||
EXC( lb t1, 0(src), l_exc)
|
||||
ADD src, src, 1
|
||||
sb t1, 0(dst) # can't fault -- we're copy_from_user
|
||||
bne src, t0, 1b
|
||||
ADD dst, dst, 1
|
||||
l_exc:
|
||||
LOAD t0, TI_TASK($28)
|
||||
nop
|
||||
LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
|
||||
nop
|
||||
SUB len, AT, t0 # len number of uncopied bytes
|
||||
/*
|
||||
* Here's where we rely on src and dst being incremented in tandem,
|
||||
* See (3) above.
|
||||
* dst += (fault addr - src) to put dst at first byte to clear
|
||||
*/
|
||||
ADD dst, t0 # compute start address in a1
|
||||
SUB dst, src
|
||||
/*
|
||||
* Clear len bytes starting at dst. Can't call __bzero because it
|
||||
* might modify len. An inefficient loop for these rare times...
|
||||
*/
|
||||
beqz len, done
|
||||
SUB src, len, 1
|
||||
1: sb zero, 0(dst)
|
||||
ADD dst, dst, 1
|
||||
bnez src, 1b
|
||||
SUB src, src, 1
|
||||
jr ra
|
||||
nop
|
||||
|
||||
|
||||
#define SEXC(n) \
|
||||
s_exc_p ## n ## u: \
|
||||
jr ra; \
|
||||
ADD len, len, n*NBYTES
|
||||
|
||||
SEXC(16)
|
||||
SEXC(15)
|
||||
SEXC(14)
|
||||
SEXC(13)
|
||||
SEXC(12)
|
||||
SEXC(11)
|
||||
SEXC(10)
|
||||
SEXC(9)
|
||||
SEXC(8)
|
||||
SEXC(7)
|
||||
SEXC(6)
|
||||
SEXC(5)
|
||||
SEXC(4)
|
||||
SEXC(3)
|
||||
SEXC(2)
|
||||
SEXC(1)
|
||||
|
||||
s_exc_p1:
|
||||
jr ra
|
||||
ADD len, len, 1
|
||||
s_exc:
|
||||
jr ra
|
||||
nop
|
||||
|
||||
.align 5
|
||||
LEAF(memmove)
|
||||
ADD t0, a0, a2
|
||||
ADD t1, a1, a2
|
||||
sltu t0, a1, t0 # dst + len <= src -> memcpy
|
||||
sltu t1, a0, t1 # dst >= src + len -> memcpy
|
||||
and t0, t1
|
||||
beqz t0, __memcpy
|
||||
move v0, a0 /* return value */
|
||||
beqz a2, r_out
|
||||
END(memmove)
|
||||
|
||||
/* fall through to __rmemcpy */
|
||||
LEAF(__rmemcpy) /* a0=dst a1=src a2=len */
|
||||
sltu t0, a1, a0
|
||||
beqz t0, r_end_bytes_up # src >= dst
|
||||
nop
|
||||
ADD a0, a2 # dst = dst + len
|
||||
ADD a1, a2 # src = src + len
|
||||
|
||||
r_end_bytes:
|
||||
lb t0, -1(a1)
|
||||
SUB a2, a2, 0x1
|
||||
sb t0, -1(a0)
|
||||
SUB a1, a1, 0x1
|
||||
bnez a2, r_end_bytes
|
||||
SUB a0, a0, 0x1
|
||||
|
||||
r_out:
|
||||
jr ra
|
||||
move a2, zero
|
||||
|
||||
r_end_bytes_up:
|
||||
lb t0, (a1)
|
||||
SUB a2, a2, 0x1
|
||||
sb t0, (a0)
|
||||
ADD a1, a1, 0x1
|
||||
bnez a2, r_end_bytes_up
|
||||
ADD a0, a0, 0x1
|
||||
|
||||
jr ra
|
||||
move a2, zero
|
||||
END(__rmemcpy)
|
136
arch/mips/cavium-octeon/serial.c
Normal file
136
arch/mips/cavium-octeon/serial.c
Normal file
|
@ -0,0 +1,136 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004-2007 Cavium Networks
|
||||
*/
|
||||
#include <linux/console.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/serial_reg.h>
|
||||
#include <linux/tty.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
|
||||
#ifdef CONFIG_GDB_CONSOLE
|
||||
#define DEBUG_UART 0
|
||||
#else
|
||||
#define DEBUG_UART 1
|
||||
#endif
|
||||
|
||||
unsigned int octeon_serial_in(struct uart_port *up, int offset)
|
||||
{
|
||||
int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
|
||||
if (offset == UART_IIR && (rv & 0xf) == 7) {
|
||||
/* Busy interrupt, read the USR (39) and try again. */
|
||||
cvmx_read_csr((uint64_t)(up->membase + (39 << 3)));
|
||||
rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
|
||||
}
|
||||
return rv;
|
||||
}
|
||||
|
||||
void octeon_serial_out(struct uart_port *up, int offset, int value)
|
||||
{
|
||||
/*
|
||||
* If bits 6 or 7 of the OCTEON UART's LCR are set, it quits
|
||||
* working.
|
||||
*/
|
||||
if (offset == UART_LCR)
|
||||
value &= 0x9f;
|
||||
cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value);
|
||||
}
|
||||
|
||||
/*
|
||||
* Allocated in .bss, so it is all zeroed.
|
||||
*/
|
||||
#define OCTEON_MAX_UARTS 3
|
||||
static struct plat_serial8250_port octeon_uart8250_data[OCTEON_MAX_UARTS + 1];
|
||||
static struct platform_device octeon_uart8250_device = {
|
||||
.name = "serial8250",
|
||||
.id = PLAT8250_DEV_PLATFORM,
|
||||
.dev = {
|
||||
.platform_data = octeon_uart8250_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
|
||||
{
|
||||
p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
|
||||
p->type = PORT_OCTEON;
|
||||
p->iotype = UPIO_MEM;
|
||||
p->regshift = 3; /* I/O addresses are every 8 bytes */
|
||||
p->uartclk = mips_hpt_frequency;
|
||||
p->serial_in = octeon_serial_in;
|
||||
p->serial_out = octeon_serial_out;
|
||||
}
|
||||
|
||||
static int __init octeon_serial_init(void)
|
||||
{
|
||||
int enable_uart0;
|
||||
int enable_uart1;
|
||||
int enable_uart2;
|
||||
struct plat_serial8250_port *p;
|
||||
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
|
||||
/*
|
||||
* If we are configured to run as the second of two kernels,
|
||||
* disable uart0 and enable uart1. Uart0 is owned by the first
|
||||
* kernel
|
||||
*/
|
||||
enable_uart0 = 0;
|
||||
enable_uart1 = 1;
|
||||
#else
|
||||
/*
|
||||
* We are configured for the first kernel. We'll enable uart0
|
||||
* if the bootloader told us to use 0, otherwise will enable
|
||||
* uart 1.
|
||||
*/
|
||||
enable_uart0 = (octeon_get_boot_uart() == 0);
|
||||
enable_uart1 = (octeon_get_boot_uart() == 1);
|
||||
#ifdef CONFIG_KGDB
|
||||
enable_uart1 = 1;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* Right now CN52XX is the only chip with a third uart */
|
||||
enable_uart2 = OCTEON_IS_MODEL(OCTEON_CN52XX);
|
||||
|
||||
p = octeon_uart8250_data;
|
||||
if (enable_uart0) {
|
||||
/* Add a ttyS device for hardware uart 0 */
|
||||
octeon_uart_set_common(p);
|
||||
p->membase = (void *) CVMX_MIO_UARTX_RBR(0);
|
||||
p->mapbase = CVMX_MIO_UARTX_RBR(0) & ((1ull << 49) - 1);
|
||||
p->irq = OCTEON_IRQ_UART0;
|
||||
p++;
|
||||
}
|
||||
|
||||
if (enable_uart1) {
|
||||
/* Add a ttyS device for hardware uart 1 */
|
||||
octeon_uart_set_common(p);
|
||||
p->membase = (void *) CVMX_MIO_UARTX_RBR(1);
|
||||
p->mapbase = CVMX_MIO_UARTX_RBR(1) & ((1ull << 49) - 1);
|
||||
p->irq = OCTEON_IRQ_UART1;
|
||||
p++;
|
||||
}
|
||||
if (enable_uart2) {
|
||||
/* Add a ttyS device for hardware uart 2 */
|
||||
octeon_uart_set_common(p);
|
||||
p->membase = (void *) CVMX_MIO_UART2_RBR;
|
||||
p->mapbase = CVMX_MIO_UART2_RBR & ((1ull << 49) - 1);
|
||||
p->irq = OCTEON_IRQ_UART2;
|
||||
p++;
|
||||
}
|
||||
|
||||
BUG_ON(p > &octeon_uart8250_data[OCTEON_MAX_UARTS]);
|
||||
|
||||
return platform_device_register(&octeon_uart8250_device);
|
||||
}
|
||||
|
||||
device_initcall(octeon_serial_init);
|
929
arch/mips/cavium-octeon/setup.c
Normal file
929
arch/mips/cavium-octeon/setup.c
Normal file
|
@ -0,0 +1,929 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004-2007 Cavium Networks
|
||||
* Copyright (C) 2008 Wind River Systems
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/string.h> /* for memset */
|
||||
#include <linux/serial.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/string.h>
|
||||
|
||||
#include <asm/processor.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/smp-ops.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/irq_cpu.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/sections.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
|
||||
#ifdef CONFIG_CAVIUM_DECODE_RSL
|
||||
extern void cvmx_interrupt_rsl_decode(void);
|
||||
extern int __cvmx_interrupt_ecc_report_single_bit_errors;
|
||||
extern void cvmx_interrupt_rsl_enable(void);
|
||||
#endif
|
||||
|
||||
extern struct plat_smp_ops octeon_smp_ops;
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
extern void pci_console_init(const char *arg);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32
|
||||
extern uint64_t octeon_reserve32_memory;
|
||||
#endif
|
||||
static unsigned long long MAX_MEMORY = 512ull << 20;
|
||||
|
||||
struct octeon_boot_descriptor *octeon_boot_desc_ptr;
|
||||
|
||||
struct cvmx_bootinfo *octeon_bootinfo;
|
||||
EXPORT_SYMBOL(octeon_bootinfo);
|
||||
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32
|
||||
uint64_t octeon_reserve32_memory;
|
||||
EXPORT_SYMBOL(octeon_reserve32_memory);
|
||||
#endif
|
||||
|
||||
static int octeon_uart;
|
||||
|
||||
extern asmlinkage void handle_int(void);
|
||||
extern asmlinkage void plat_irq_dispatch(void);
|
||||
|
||||
/**
|
||||
* Return non zero if we are currently running in the Octeon simulator
|
||||
*
|
||||
* Returns
|
||||
*/
|
||||
int octeon_is_simulation(void)
|
||||
{
|
||||
return octeon_bootinfo->board_type == CVMX_BOARD_TYPE_SIM;
|
||||
}
|
||||
EXPORT_SYMBOL(octeon_is_simulation);
|
||||
|
||||
/**
|
||||
* Return true if Octeon is in PCI Host mode. This means
|
||||
* Linux can control the PCI bus.
|
||||
*
|
||||
* Returns Non zero if Octeon in host mode.
|
||||
*/
|
||||
int octeon_is_pci_host(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
return octeon_bootinfo->config_flags & CVMX_BOOTINFO_CFG_FLAG_PCI_HOST;
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* Get the clock rate of Octeon
|
||||
*
|
||||
* Returns Clock rate in HZ
|
||||
*/
|
||||
uint64_t octeon_get_clock_rate(void)
|
||||
{
|
||||
if (octeon_is_simulation())
|
||||
octeon_bootinfo->eclock_hz = 6000000;
|
||||
return octeon_bootinfo->eclock_hz;
|
||||
}
|
||||
EXPORT_SYMBOL(octeon_get_clock_rate);
|
||||
|
||||
/**
|
||||
* Write to the LCD display connected to the bootbus. This display
|
||||
* exists on most Cavium evaluation boards. If it doesn't exist, then
|
||||
* this function doesn't do anything.
|
||||
*
|
||||
* @s: String to write
|
||||
*/
|
||||
void octeon_write_lcd(const char *s)
|
||||
{
|
||||
if (octeon_bootinfo->led_display_base_addr) {
|
||||
void __iomem *lcd_address =
|
||||
ioremap_nocache(octeon_bootinfo->led_display_base_addr,
|
||||
8);
|
||||
int i;
|
||||
for (i = 0; i < 8; i++, s++) {
|
||||
if (*s)
|
||||
iowrite8(*s, lcd_address + i);
|
||||
else
|
||||
iowrite8(' ', lcd_address + i);
|
||||
}
|
||||
iounmap(lcd_address);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Return the console uart passed by the bootloader
|
||||
*
|
||||
* Returns uart (0 or 1)
|
||||
*/
|
||||
int octeon_get_boot_uart(void)
|
||||
{
|
||||
int uart;
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
|
||||
uart = 1;
|
||||
#else
|
||||
uart = (octeon_boot_desc_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1) ?
|
||||
1 : 0;
|
||||
#endif
|
||||
return uart;
|
||||
}
|
||||
|
||||
/**
|
||||
* Get the coremask Linux was booted on.
|
||||
*
|
||||
* Returns Core mask
|
||||
*/
|
||||
int octeon_get_boot_coremask(void)
|
||||
{
|
||||
return octeon_boot_desc_ptr->core_mask;
|
||||
}
|
||||
|
||||
/**
|
||||
* Check the hardware BIST results for a CPU
|
||||
*/
|
||||
void octeon_check_cpu_bist(void)
|
||||
{
|
||||
const int coreid = cvmx_get_core_num();
|
||||
unsigned long long mask;
|
||||
unsigned long long bist_val;
|
||||
|
||||
/* Check BIST results for COP0 registers */
|
||||
mask = 0x1f00000000ull;
|
||||
bist_val = read_octeon_c0_icacheerr();
|
||||
if (bist_val & mask)
|
||||
pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n",
|
||||
coreid, bist_val);
|
||||
|
||||
bist_val = read_octeon_c0_dcacheerr();
|
||||
if (bist_val & 1)
|
||||
pr_err("Core%d L1 Dcache parity error: "
|
||||
"CacheErr(dcache) = 0x%llx\n",
|
||||
coreid, bist_val);
|
||||
|
||||
mask = 0xfc00000000000000ull;
|
||||
bist_val = read_c0_cvmmemctl();
|
||||
if (bist_val & mask)
|
||||
pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n",
|
||||
coreid, bist_val);
|
||||
|
||||
write_octeon_c0_dcacheerr(0);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
|
||||
/**
|
||||
* Called on every core to setup the wired tlb entry needed
|
||||
* if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
|
||||
*
|
||||
*/
|
||||
static void octeon_hal_setup_per_cpu_reserved32(void *unused)
|
||||
{
|
||||
/*
|
||||
* The config has selected to wire the reserve32 memory for all
|
||||
* userspace applications. We need to put a wired TLB entry in for each
|
||||
* 512MB of reserve32 memory. We only handle double 256MB pages here,
|
||||
* so reserve32 must be multiple of 512MB.
|
||||
*/
|
||||
uint32_t size = CONFIG_CAVIUM_RESERVE32;
|
||||
uint32_t entrylo0 =
|
||||
0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6);
|
||||
uint32_t entrylo1 = entrylo0 + (256 << 14);
|
||||
uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20));
|
||||
while (size >= 512) {
|
||||
#if 0
|
||||
pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
|
||||
smp_processor_id(), entryhi);
|
||||
#endif
|
||||
add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M);
|
||||
entrylo0 += 512 << 14;
|
||||
entrylo1 += 512 << 14;
|
||||
entryhi += 512 << 20;
|
||||
size -= 512;
|
||||
}
|
||||
}
|
||||
#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
|
||||
|
||||
/**
|
||||
* Called to release the named block which was used to made sure
|
||||
* that nobody used the memory for something else during
|
||||
* init. Now we'll free it so userspace apps can use this
|
||||
* memory region with bootmem_alloc.
|
||||
*
|
||||
* This function is called only once from prom_free_prom_memory().
|
||||
*/
|
||||
void octeon_hal_setup_reserved32(void)
|
||||
{
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
|
||||
on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1);
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* Reboot Octeon
|
||||
*
|
||||
* @command: Command to pass to the bootloader. Currently ignored.
|
||||
*/
|
||||
static void octeon_restart(char *command)
|
||||
{
|
||||
/* Disable all watchdogs before soft reset. They don't get cleared */
|
||||
#ifdef CONFIG_SMP
|
||||
int cpu;
|
||||
for_each_online_cpu(cpu)
|
||||
cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0);
|
||||
#else
|
||||
cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
|
||||
#endif
|
||||
|
||||
mb();
|
||||
while (1)
|
||||
cvmx_write_csr(CVMX_CIU_SOFT_RST, 1);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Permanently stop a core.
|
||||
*
|
||||
* @arg: Ignored.
|
||||
*/
|
||||
static void octeon_kill_core(void *arg)
|
||||
{
|
||||
mb();
|
||||
if (octeon_is_simulation()) {
|
||||
/* The simulator needs the watchdog to stop for dead cores */
|
||||
cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
|
||||
/* A break instruction causes the simulator stop a core */
|
||||
asm volatile ("sync\nbreak");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Halt the system
|
||||
*/
|
||||
static void octeon_halt(void)
|
||||
{
|
||||
smp_call_function(octeon_kill_core, NULL, 0);
|
||||
|
||||
switch (octeon_bootinfo->board_type) {
|
||||
case CVMX_BOARD_TYPE_NAO38:
|
||||
/* Driving a 1 to GPIO 12 shuts off this board */
|
||||
cvmx_write_csr(CVMX_GPIO_BIT_CFGX(12), 1);
|
||||
cvmx_write_csr(CVMX_GPIO_TX_SET, 0x1000);
|
||||
break;
|
||||
default:
|
||||
octeon_write_lcd("PowerOff");
|
||||
break;
|
||||
}
|
||||
|
||||
octeon_kill_core(NULL);
|
||||
}
|
||||
|
||||
#if 0
|
||||
/**
|
||||
* Platform time init specifics.
|
||||
* Returns
|
||||
*/
|
||||
void __init plat_time_init(void)
|
||||
{
|
||||
/* Nothing special here, but we are required to have one */
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Handle all the error condition interrupts that might occur.
|
||||
*
|
||||
*/
|
||||
#ifdef CONFIG_CAVIUM_DECODE_RSL
|
||||
static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id)
|
||||
{
|
||||
cvmx_interrupt_rsl_decode();
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Return a string representing the system type
|
||||
*
|
||||
* Returns
|
||||
*/
|
||||
const char *octeon_board_type_string(void)
|
||||
{
|
||||
static char name[80];
|
||||
sprintf(name, "%s (%s)",
|
||||
cvmx_board_type_to_string(octeon_bootinfo->board_type),
|
||||
octeon_model_get_string(read_c0_prid()));
|
||||
return name;
|
||||
}
|
||||
|
||||
const char *get_system_type(void)
|
||||
__attribute__ ((alias("octeon_board_type_string")));
|
||||
|
||||
void octeon_user_io_init(void)
|
||||
{
|
||||
union octeon_cvmemctl cvmmemctl;
|
||||
union cvmx_iob_fau_timeout fau_timeout;
|
||||
union cvmx_pow_nw_tim nm_tim;
|
||||
uint64_t cvmctl;
|
||||
|
||||
/* Get the current settings for CP0_CVMMEMCTL_REG */
|
||||
cvmmemctl.u64 = read_c0_cvmmemctl();
|
||||
/* R/W If set, marked write-buffer entries time out the same
|
||||
* as as other entries; if clear, marked write-buffer entries
|
||||
* use the maximum timeout. */
|
||||
cvmmemctl.s.dismarkwblongto = 1;
|
||||
/* R/W If set, a merged store does not clear the write-buffer
|
||||
* entry timeout state. */
|
||||
cvmmemctl.s.dismrgclrwbto = 0;
|
||||
/* R/W Two bits that are the MSBs of the resultant CVMSEG LM
|
||||
* word location for an IOBDMA. The other 8 bits come from the
|
||||
* SCRADDR field of the IOBDMA. */
|
||||
cvmmemctl.s.iobdmascrmsb = 0;
|
||||
/* R/W If set, SYNCWS and SYNCS only order marked stores; if
|
||||
* clear, SYNCWS and SYNCS only order unmarked
|
||||
* stores. SYNCWSMARKED has no effect when DISSYNCWS is
|
||||
* set. */
|
||||
cvmmemctl.s.syncwsmarked = 0;
|
||||
/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as SYNC. */
|
||||
cvmmemctl.s.dissyncws = 0;
|
||||
/* R/W If set, no stall happens on write buffer full. */
|
||||
if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2))
|
||||
cvmmemctl.s.diswbfst = 1;
|
||||
else
|
||||
cvmmemctl.s.diswbfst = 0;
|
||||
/* R/W If set (and SX set), supervisor-level loads/stores can
|
||||
* use XKPHYS addresses with <48>==0 */
|
||||
cvmmemctl.s.xkmemenas = 0;
|
||||
|
||||
/* R/W If set (and UX set), user-level loads/stores can use
|
||||
* XKPHYS addresses with VA<48>==0 */
|
||||
cvmmemctl.s.xkmemenau = 0;
|
||||
|
||||
/* R/W If set (and SX set), supervisor-level loads/stores can
|
||||
* use XKPHYS addresses with VA<48>==1 */
|
||||
cvmmemctl.s.xkioenas = 0;
|
||||
|
||||
/* R/W If set (and UX set), user-level loads/stores can use
|
||||
* XKPHYS addresses with VA<48>==1 */
|
||||
cvmmemctl.s.xkioenau = 0;
|
||||
|
||||
/* R/W If set, all stores act as SYNCW (NOMERGE must be set
|
||||
* when this is set) RW, reset to 0. */
|
||||
cvmmemctl.s.allsyncw = 0;
|
||||
|
||||
/* R/W If set, no stores merge, and all stores reach the
|
||||
* coherent bus in order. */
|
||||
cvmmemctl.s.nomerge = 0;
|
||||
/* R/W Selects the bit in the counter used for DID time-outs 0
|
||||
* = 231, 1 = 230, 2 = 229, 3 = 214. Actual time-out is
|
||||
* between 1x and 2x this interval. For example, with
|
||||
* DIDTTO=3, expiration interval is between 16K and 32K. */
|
||||
cvmmemctl.s.didtto = 0;
|
||||
/* R/W If set, the (mem) CSR clock never turns off. */
|
||||
cvmmemctl.s.csrckalwys = 0;
|
||||
/* R/W If set, mclk never turns off. */
|
||||
cvmmemctl.s.mclkalwys = 0;
|
||||
/* R/W Selects the bit in the counter used for write buffer
|
||||
* flush time-outs (WBFLT+11) is the bit position in an
|
||||
* internal counter used to determine expiration. The write
|
||||
* buffer expires between 1x and 2x this interval. For
|
||||
* example, with WBFLT = 0, a write buffer expires between 2K
|
||||
* and 4K cycles after the write buffer entry is allocated. */
|
||||
cvmmemctl.s.wbfltime = 0;
|
||||
/* R/W If set, do not put Istream in the L2 cache. */
|
||||
cvmmemctl.s.istrnol2 = 0;
|
||||
/* R/W The write buffer threshold. */
|
||||
cvmmemctl.s.wbthresh = 10;
|
||||
/* R/W If set, CVMSEG is available for loads/stores in
|
||||
* kernel/debug mode. */
|
||||
#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
|
||||
cvmmemctl.s.cvmsegenak = 1;
|
||||
#else
|
||||
cvmmemctl.s.cvmsegenak = 0;
|
||||
#endif
|
||||
/* R/W If set, CVMSEG is available for loads/stores in
|
||||
* supervisor mode. */
|
||||
cvmmemctl.s.cvmsegenas = 0;
|
||||
/* R/W If set, CVMSEG is available for loads/stores in user
|
||||
* mode. */
|
||||
cvmmemctl.s.cvmsegenau = 0;
|
||||
/* R/W Size of local memory in cache blocks, 54 (6912 bytes)
|
||||
* is max legal value. */
|
||||
cvmmemctl.s.lmemsz = CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE;
|
||||
|
||||
|
||||
if (smp_processor_id() == 0)
|
||||
pr_notice("CVMSEG size: %d cache lines (%d bytes)\n",
|
||||
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
|
||||
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
|
||||
|
||||
write_c0_cvmmemctl(cvmmemctl.u64);
|
||||
|
||||
/* Move the performance counter interrupts to IRQ 6 */
|
||||
cvmctl = read_c0_cvmctl();
|
||||
cvmctl &= ~(7 << 7);
|
||||
cvmctl |= 6 << 7;
|
||||
write_c0_cvmctl(cvmctl);
|
||||
|
||||
/* Set a default for the hardware timeouts */
|
||||
fau_timeout.u64 = 0;
|
||||
fau_timeout.s.tout_val = 0xfff;
|
||||
/* Disable tagwait FAU timeout */
|
||||
fau_timeout.s.tout_enb = 0;
|
||||
cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_timeout.u64);
|
||||
|
||||
nm_tim.u64 = 0;
|
||||
/* 4096 cycles */
|
||||
nm_tim.s.nw_tim = 3;
|
||||
cvmx_write_csr(CVMX_POW_NW_TIM, nm_tim.u64);
|
||||
|
||||
write_octeon_c0_icacheerr(0);
|
||||
write_c0_derraddr1(0);
|
||||
}
|
||||
|
||||
/**
|
||||
* Early entry point for arch setup
|
||||
*/
|
||||
void __init prom_init(void)
|
||||
{
|
||||
struct cvmx_sysinfo *sysinfo;
|
||||
const int coreid = cvmx_get_core_num();
|
||||
int i;
|
||||
int argc;
|
||||
struct uart_port octeon_port;
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32
|
||||
int64_t addr = -1;
|
||||
#endif
|
||||
/*
|
||||
* The bootloader passes a pointer to the boot descriptor in
|
||||
* $a3, this is available as fw_arg3.
|
||||
*/
|
||||
octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3;
|
||||
octeon_bootinfo =
|
||||
cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr);
|
||||
cvmx_bootmem_init(cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr));
|
||||
|
||||
/*
|
||||
* Only enable the LED controller if we're running on a CN38XX, CN58XX,
|
||||
* or CN56XX. The CN30XX and CN31XX don't have an LED controller.
|
||||
*/
|
||||
if (!octeon_is_simulation() &&
|
||||
octeon_has_feature(OCTEON_FEATURE_LED_CONTROLLER)) {
|
||||
cvmx_write_csr(CVMX_LED_EN, 0);
|
||||
cvmx_write_csr(CVMX_LED_PRT, 0);
|
||||
cvmx_write_csr(CVMX_LED_DBG, 0);
|
||||
cvmx_write_csr(CVMX_LED_PRT_FMT, 0);
|
||||
cvmx_write_csr(CVMX_LED_UDD_CNTX(0), 32);
|
||||
cvmx_write_csr(CVMX_LED_UDD_CNTX(1), 32);
|
||||
cvmx_write_csr(CVMX_LED_UDD_DATX(0), 0);
|
||||
cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0);
|
||||
cvmx_write_csr(CVMX_LED_EN, 1);
|
||||
}
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32
|
||||
/*
|
||||
* We need to temporarily allocate all memory in the reserve32
|
||||
* region. This makes sure the kernel doesn't allocate this
|
||||
* memory when it is getting memory from the
|
||||
* bootloader. Later, after the memory allocations are
|
||||
* complete, the reserve32 will be freed.
|
||||
*/
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
|
||||
if (CONFIG_CAVIUM_RESERVE32 & 0x1ff)
|
||||
pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
|
||||
"This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
|
||||
"is set\n");
|
||||
else
|
||||
addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
|
||||
0, 0, 512 << 20,
|
||||
"CAVIUM_RESERVE32", 0);
|
||||
#else
|
||||
/*
|
||||
* Allocate memory for RESERVED32 aligned on 2MB boundary. This
|
||||
* is in case we later use hugetlb entries with it.
|
||||
*/
|
||||
addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
|
||||
0, 0, 2 << 20,
|
||||
"CAVIUM_RESERVE32", 0);
|
||||
#endif
|
||||
if (addr < 0)
|
||||
pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
|
||||
else
|
||||
octeon_reserve32_memory = addr;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2
|
||||
if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) {
|
||||
pr_info("Skipping L2 locking due to reduced L2 cache size\n");
|
||||
} else {
|
||||
uint32_t ebase = read_c0_ebase() & 0x3ffff000;
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB
|
||||
/* TLB refill */
|
||||
cvmx_l2c_lock_mem_region(ebase, 0x100);
|
||||
#endif
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION
|
||||
/* General exception */
|
||||
cvmx_l2c_lock_mem_region(ebase + 0x180, 0x80);
|
||||
#endif
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
|
||||
/* Interrupt handler */
|
||||
cvmx_l2c_lock_mem_region(ebase + 0x200, 0x80);
|
||||
#endif
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT
|
||||
cvmx_l2c_lock_mem_region(__pa_symbol(handle_int), 0x100);
|
||||
cvmx_l2c_lock_mem_region(__pa_symbol(plat_irq_dispatch), 0x80);
|
||||
#endif
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY
|
||||
cvmx_l2c_lock_mem_region(__pa_symbol(memcpy), 0x480);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
sysinfo = cvmx_sysinfo_get();
|
||||
memset(sysinfo, 0, sizeof(*sysinfo));
|
||||
sysinfo->system_dram_size = octeon_bootinfo->dram_size << 20;
|
||||
sysinfo->phy_mem_desc_ptr =
|
||||
cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr);
|
||||
sysinfo->core_mask = octeon_bootinfo->core_mask;
|
||||
sysinfo->exception_base_addr = octeon_bootinfo->exception_base_addr;
|
||||
sysinfo->cpu_clock_hz = octeon_bootinfo->eclock_hz;
|
||||
sysinfo->dram_data_rate_hz = octeon_bootinfo->dclock_hz * 2;
|
||||
sysinfo->board_type = octeon_bootinfo->board_type;
|
||||
sysinfo->board_rev_major = octeon_bootinfo->board_rev_major;
|
||||
sysinfo->board_rev_minor = octeon_bootinfo->board_rev_minor;
|
||||
memcpy(sysinfo->mac_addr_base, octeon_bootinfo->mac_addr_base,
|
||||
sizeof(sysinfo->mac_addr_base));
|
||||
sysinfo->mac_addr_count = octeon_bootinfo->mac_addr_count;
|
||||
memcpy(sysinfo->board_serial_number,
|
||||
octeon_bootinfo->board_serial_number,
|
||||
sizeof(sysinfo->board_serial_number));
|
||||
sysinfo->compact_flash_common_base_addr =
|
||||
octeon_bootinfo->compact_flash_common_base_addr;
|
||||
sysinfo->compact_flash_attribute_base_addr =
|
||||
octeon_bootinfo->compact_flash_attribute_base_addr;
|
||||
sysinfo->led_display_base_addr = octeon_bootinfo->led_display_base_addr;
|
||||
sysinfo->dfa_ref_clock_hz = octeon_bootinfo->dfa_ref_clock_hz;
|
||||
sysinfo->bootloader_config_flags = octeon_bootinfo->config_flags;
|
||||
|
||||
|
||||
octeon_check_cpu_bist();
|
||||
|
||||
octeon_uart = octeon_get_boot_uart();
|
||||
|
||||
/*
|
||||
* Disable All CIU Interrupts. The ones we need will be
|
||||
* enabled later. Read the SUM register so we know the write
|
||||
* completed.
|
||||
*/
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), 0);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0);
|
||||
cvmx_read_csr(CVMX_CIU_INTX_SUM0((coreid * 2)));
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
octeon_write_lcd("LinuxSMP");
|
||||
#else
|
||||
octeon_write_lcd("Linux");
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CAVIUM_GDB
|
||||
/*
|
||||
* When debugging the linux kernel, force the cores to enter
|
||||
* the debug exception handler to break in.
|
||||
*/
|
||||
if (octeon_get_boot_debug_flag()) {
|
||||
cvmx_write_csr(CVMX_CIU_DINT, 1 << cvmx_get_core_num());
|
||||
cvmx_read_csr(CVMX_CIU_DINT);
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* BIST should always be enabled when doing a soft reset. L2
|
||||
* Cache locking for instance is not cleared unless BIST is
|
||||
* enabled. Unfortunately due to a chip errata G-200 for
|
||||
* Cn38XX and CN31XX, BIST msut be disabled on these parts.
|
||||
*/
|
||||
if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) ||
|
||||
OCTEON_IS_MODEL(OCTEON_CN31XX))
|
||||
cvmx_write_csr(CVMX_CIU_SOFT_BIST, 0);
|
||||
else
|
||||
cvmx_write_csr(CVMX_CIU_SOFT_BIST, 1);
|
||||
|
||||
/* Default to 64MB in the simulator to speed things up */
|
||||
if (octeon_is_simulation())
|
||||
MAX_MEMORY = 64ull << 20;
|
||||
|
||||
arcs_cmdline[0] = 0;
|
||||
argc = octeon_boot_desc_ptr->argc;
|
||||
for (i = 0; i < argc; i++) {
|
||||
const char *arg =
|
||||
cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
|
||||
if ((strncmp(arg, "MEM=", 4) == 0) ||
|
||||
(strncmp(arg, "mem=", 4) == 0)) {
|
||||
sscanf(arg + 4, "%llu", &MAX_MEMORY);
|
||||
MAX_MEMORY <<= 20;
|
||||
if (MAX_MEMORY == 0)
|
||||
MAX_MEMORY = 32ull << 30;
|
||||
} else if (strcmp(arg, "ecc_verbose") == 0) {
|
||||
#ifdef CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC
|
||||
__cvmx_interrupt_ecc_report_single_bit_errors = 1;
|
||||
pr_notice("Reporting of single bit ECC errors is "
|
||||
"turned on\n");
|
||||
#endif
|
||||
} else if (strlen(arcs_cmdline) + strlen(arg) + 1 <
|
||||
sizeof(arcs_cmdline) - 1) {
|
||||
strcat(arcs_cmdline, " ");
|
||||
strcat(arcs_cmdline, arg);
|
||||
}
|
||||
}
|
||||
|
||||
if (strstr(arcs_cmdline, "console=") == NULL) {
|
||||
#ifdef CONFIG_GDB_CONSOLE
|
||||
strcat(arcs_cmdline, " console=gdb");
|
||||
#else
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
|
||||
strcat(arcs_cmdline, " console=ttyS0,115200");
|
||||
#else
|
||||
if (octeon_uart == 1)
|
||||
strcat(arcs_cmdline, " console=ttyS1,115200");
|
||||
else
|
||||
strcat(arcs_cmdline, " console=ttyS0,115200");
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
if (octeon_is_simulation()) {
|
||||
/*
|
||||
* The simulator uses a mtdram device pre filled with
|
||||
* the filesystem. Also specify the calibration delay
|
||||
* to avoid calculating it every time.
|
||||
*/
|
||||
strcat(arcs_cmdline, " rw root=1f00"
|
||||
" lpj=60176 slram=root,0x40000000,+1073741824");
|
||||
}
|
||||
|
||||
mips_hpt_frequency = octeon_get_clock_rate();
|
||||
|
||||
octeon_init_cvmcount();
|
||||
|
||||
_machine_restart = octeon_restart;
|
||||
_machine_halt = octeon_halt;
|
||||
|
||||
memset(&octeon_port, 0, sizeof(octeon_port));
|
||||
/*
|
||||
* For early_serial_setup we don't set the port type or
|
||||
* UPF_FIXED_TYPE.
|
||||
*/
|
||||
octeon_port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ;
|
||||
octeon_port.iotype = UPIO_MEM;
|
||||
/* I/O addresses are every 8 bytes */
|
||||
octeon_port.regshift = 3;
|
||||
/* Clock rate of the chip */
|
||||
octeon_port.uartclk = mips_hpt_frequency;
|
||||
octeon_port.fifosize = 64;
|
||||
octeon_port.mapbase = 0x0001180000000800ull + (1024 * octeon_uart);
|
||||
octeon_port.membase = cvmx_phys_to_ptr(octeon_port.mapbase);
|
||||
octeon_port.serial_in = octeon_serial_in;
|
||||
octeon_port.serial_out = octeon_serial_out;
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
|
||||
octeon_port.line = 0;
|
||||
#else
|
||||
octeon_port.line = octeon_uart;
|
||||
#endif
|
||||
octeon_port.irq = 42 + octeon_uart;
|
||||
early_serial_setup(&octeon_port);
|
||||
|
||||
octeon_user_io_init();
|
||||
register_smp_ops(&octeon_smp_ops);
|
||||
}
|
||||
|
||||
void __init plat_mem_setup(void)
|
||||
{
|
||||
uint64_t mem_alloc_size;
|
||||
uint64_t total;
|
||||
int64_t memory;
|
||||
|
||||
total = 0;
|
||||
|
||||
/* First add the init memory we will be returning. */
|
||||
memory = __pa_symbol(&__init_begin) & PAGE_MASK;
|
||||
mem_alloc_size = (__pa_symbol(&__init_end) & PAGE_MASK) - memory;
|
||||
if (mem_alloc_size > 0) {
|
||||
add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
|
||||
total += mem_alloc_size;
|
||||
}
|
||||
|
||||
/*
|
||||
* The Mips memory init uses the first memory location for
|
||||
* some memory vectors. When SPARSEMEM is in use, it doesn't
|
||||
* verify that the size is big enough for the final
|
||||
* vectors. Making the smallest chuck 4MB seems to be enough
|
||||
* to consistantly work.
|
||||
*/
|
||||
mem_alloc_size = 4 << 20;
|
||||
if (mem_alloc_size > MAX_MEMORY)
|
||||
mem_alloc_size = MAX_MEMORY;
|
||||
|
||||
/*
|
||||
* When allocating memory, we want incrementing addresses from
|
||||
* bootmem_alloc so the code in add_memory_region can merge
|
||||
* regions next to each other.
|
||||
*/
|
||||
cvmx_bootmem_lock();
|
||||
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
|
||||
&& (total < MAX_MEMORY)) {
|
||||
#if defined(CONFIG_64BIT) || defined(CONFIG_64BIT_PHYS_ADDR)
|
||||
memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
|
||||
__pa_symbol(&__init_end), -1,
|
||||
0x100000,
|
||||
CVMX_BOOTMEM_FLAG_NO_LOCKING);
|
||||
#elif defined(CONFIG_HIGHMEM)
|
||||
memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 1ull << 31,
|
||||
0x100000,
|
||||
CVMX_BOOTMEM_FLAG_NO_LOCKING);
|
||||
#else
|
||||
memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 512 << 20,
|
||||
0x100000,
|
||||
CVMX_BOOTMEM_FLAG_NO_LOCKING);
|
||||
#endif
|
||||
if (memory >= 0) {
|
||||
/*
|
||||
* This function automatically merges address
|
||||
* regions next to each other if they are
|
||||
* received in incrementing order.
|
||||
*/
|
||||
add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
|
||||
total += mem_alloc_size;
|
||||
} else {
|
||||
break;
|
||||
}
|
||||
}
|
||||
cvmx_bootmem_unlock();
|
||||
|
||||
#ifdef CONFIG_CAVIUM_RESERVE32
|
||||
/*
|
||||
* Now that we've allocated the kernel memory it is safe to
|
||||
* free the reserved region. We free it here so that builtin
|
||||
* drivers can use the memory.
|
||||
*/
|
||||
if (octeon_reserve32_memory)
|
||||
cvmx_bootmem_free_named("CAVIUM_RESERVE32");
|
||||
#endif /* CONFIG_CAVIUM_RESERVE32 */
|
||||
|
||||
if (total == 0)
|
||||
panic("Unable to allocate memory from "
|
||||
"cvmx_bootmem_phy_alloc\n");
|
||||
}
|
||||
|
||||
|
||||
int prom_putchar(char c)
|
||||
{
|
||||
uint64_t lsrval;
|
||||
|
||||
/* Spin until there is room */
|
||||
do {
|
||||
lsrval = cvmx_read_csr(CVMX_MIO_UARTX_LSR(octeon_uart));
|
||||
} while ((lsrval & 0x20) == 0);
|
||||
|
||||
/* Write the byte */
|
||||
cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c);
|
||||
return 1;
|
||||
}
|
||||
|
||||
void prom_free_prom_memory(void)
|
||||
{
|
||||
#ifdef CONFIG_CAVIUM_DECODE_RSL
|
||||
cvmx_interrupt_rsl_enable();
|
||||
|
||||
/* Add an interrupt handler for general failures. */
|
||||
if (request_irq(OCTEON_IRQ_RML, octeon_rlm_interrupt, IRQF_SHARED,
|
||||
"RML/RSL", octeon_rlm_interrupt)) {
|
||||
panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
|
||||
}
|
||||
#endif
|
||||
|
||||
/* This call is here so that it is performed after any TLB
|
||||
initializations. It needs to be after these in case the
|
||||
CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
|
||||
octeon_hal_setup_reserved32();
|
||||
}
|
||||
|
||||
static struct octeon_cf_data octeon_cf_data;
|
||||
|
||||
static int __init octeon_cf_device_init(void)
|
||||
{
|
||||
union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
|
||||
unsigned long base_ptr, region_base, region_size;
|
||||
struct platform_device *pd;
|
||||
struct resource cf_resources[3];
|
||||
unsigned int num_resources;
|
||||
int i;
|
||||
int ret = 0;
|
||||
|
||||
/* Setup octeon-cf platform device if present. */
|
||||
base_ptr = 0;
|
||||
if (octeon_bootinfo->major_version == 1
|
||||
&& octeon_bootinfo->minor_version >= 1) {
|
||||
if (octeon_bootinfo->compact_flash_common_base_addr)
|
||||
base_ptr =
|
||||
octeon_bootinfo->compact_flash_common_base_addr;
|
||||
} else {
|
||||
base_ptr = 0x1d000800;
|
||||
}
|
||||
|
||||
if (!base_ptr)
|
||||
return ret;
|
||||
|
||||
/* Find CS0 region. */
|
||||
for (i = 0; i < 8; i++) {
|
||||
mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i));
|
||||
region_base = mio_boot_reg_cfg.s.base << 16;
|
||||
region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
|
||||
if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
|
||||
&& base_ptr < region_base + region_size)
|
||||
break;
|
||||
}
|
||||
if (i >= 7) {
|
||||
/* i and i + 1 are CS0 and CS1, both must be less than 8. */
|
||||
goto out;
|
||||
}
|
||||
octeon_cf_data.base_region = i;
|
||||
octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width;
|
||||
octeon_cf_data.base_region_bias = base_ptr - region_base;
|
||||
memset(cf_resources, 0, sizeof(cf_resources));
|
||||
num_resources = 0;
|
||||
cf_resources[num_resources].flags = IORESOURCE_MEM;
|
||||
cf_resources[num_resources].start = region_base;
|
||||
cf_resources[num_resources].end = region_base + region_size - 1;
|
||||
num_resources++;
|
||||
|
||||
|
||||
if (!(base_ptr & 0xfffful)) {
|
||||
/*
|
||||
* Boot loader signals availability of DMA (true_ide
|
||||
* mode) by setting low order bits of base_ptr to
|
||||
* zero.
|
||||
*/
|
||||
|
||||
/* Asume that CS1 immediately follows. */
|
||||
mio_boot_reg_cfg.u64 =
|
||||
cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
|
||||
region_base = mio_boot_reg_cfg.s.base << 16;
|
||||
region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
|
||||
if (!mio_boot_reg_cfg.s.en)
|
||||
goto out;
|
||||
|
||||
cf_resources[num_resources].flags = IORESOURCE_MEM;
|
||||
cf_resources[num_resources].start = region_base;
|
||||
cf_resources[num_resources].end = region_base + region_size - 1;
|
||||
num_resources++;
|
||||
|
||||
octeon_cf_data.dma_engine = 0;
|
||||
cf_resources[num_resources].flags = IORESOURCE_IRQ;
|
||||
cf_resources[num_resources].start = OCTEON_IRQ_BOOTDMA;
|
||||
cf_resources[num_resources].end = OCTEON_IRQ_BOOTDMA;
|
||||
num_resources++;
|
||||
} else {
|
||||
octeon_cf_data.dma_engine = -1;
|
||||
}
|
||||
|
||||
pd = platform_device_alloc("pata_octeon_cf", -1);
|
||||
if (!pd) {
|
||||
ret = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
pd->dev.platform_data = &octeon_cf_data;
|
||||
|
||||
ret = platform_device_add_resources(pd, cf_resources, num_resources);
|
||||
if (ret)
|
||||
goto fail;
|
||||
|
||||
ret = platform_device_add(pd);
|
||||
if (ret)
|
||||
goto fail;
|
||||
|
||||
return ret;
|
||||
fail:
|
||||
platform_device_put(pd);
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
device_initcall(octeon_cf_device_init);
|
211
arch/mips/cavium-octeon/smp.c
Normal file
211
arch/mips/cavium-octeon/smp.c
Normal file
|
@ -0,0 +1,211 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004-2008 Cavium Networks
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/smp.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel_stat.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
#include <asm/mmu_context.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
|
||||
volatile unsigned long octeon_processor_boot = 0xff;
|
||||
volatile unsigned long octeon_processor_sp;
|
||||
volatile unsigned long octeon_processor_gp;
|
||||
|
||||
static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
const int coreid = cvmx_get_core_num();
|
||||
uint64_t action;
|
||||
|
||||
/* Load the mailbox register to figure out what we're supposed to do */
|
||||
action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid));
|
||||
|
||||
/* Clear the mailbox to clear the interrupt */
|
||||
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
|
||||
|
||||
if (action & SMP_CALL_FUNCTION)
|
||||
smp_call_function_interrupt();
|
||||
|
||||
/* Check if we've been told to flush the icache */
|
||||
if (action & SMP_ICACHE_FLUSH)
|
||||
asm volatile ("synci 0($0)\n");
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/**
|
||||
* Cause the function described by call_data to be executed on the passed
|
||||
* cpu. When the function has finished, increment the finished field of
|
||||
* call_data.
|
||||
*/
|
||||
void octeon_send_ipi_single(int cpu, unsigned int action)
|
||||
{
|
||||
int coreid = cpu_logical_map(cpu);
|
||||
/*
|
||||
pr_info("SMP: Mailbox send cpu=%d, coreid=%d, action=%u\n", cpu,
|
||||
coreid, action);
|
||||
*/
|
||||
cvmx_write_csr(CVMX_CIU_MBOX_SETX(coreid), action);
|
||||
}
|
||||
|
||||
static inline void octeon_send_ipi_mask(cpumask_t mask, unsigned int action)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
for_each_cpu_mask(i, mask)
|
||||
octeon_send_ipi_single(i, action);
|
||||
}
|
||||
|
||||
/**
|
||||
* Detect available CPUs, populate phys_cpu_present_map
|
||||
*/
|
||||
static void octeon_smp_setup(void)
|
||||
{
|
||||
const int coreid = cvmx_get_core_num();
|
||||
int cpus;
|
||||
int id;
|
||||
|
||||
int core_mask = octeon_get_boot_coremask();
|
||||
|
||||
cpus_clear(cpu_possible_map);
|
||||
__cpu_number_map[coreid] = 0;
|
||||
__cpu_logical_map[0] = coreid;
|
||||
cpu_set(0, cpu_possible_map);
|
||||
|
||||
cpus = 1;
|
||||
for (id = 0; id < 16; id++) {
|
||||
if ((id != coreid) && (core_mask & (1 << id))) {
|
||||
cpu_set(cpus, cpu_possible_map);
|
||||
__cpu_number_map[id] = cpus;
|
||||
__cpu_logical_map[cpus] = id;
|
||||
cpus++;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Firmware CPU startup hook
|
||||
*
|
||||
*/
|
||||
static void octeon_boot_secondary(int cpu, struct task_struct *idle)
|
||||
{
|
||||
int count;
|
||||
|
||||
pr_info("SMP: Booting CPU%02d (CoreId %2d)...\n", cpu,
|
||||
cpu_logical_map(cpu));
|
||||
|
||||
octeon_processor_sp = __KSTK_TOS(idle);
|
||||
octeon_processor_gp = (unsigned long)(task_thread_info(idle));
|
||||
octeon_processor_boot = cpu_logical_map(cpu);
|
||||
mb();
|
||||
|
||||
count = 10000;
|
||||
while (octeon_processor_sp && count) {
|
||||
/* Waiting for processor to get the SP and GP */
|
||||
udelay(1);
|
||||
count--;
|
||||
}
|
||||
if (count == 0)
|
||||
pr_err("Secondary boot timeout\n");
|
||||
}
|
||||
|
||||
/**
|
||||
* After we've done initial boot, this function is called to allow the
|
||||
* board code to clean up state, if needed
|
||||
*/
|
||||
static void octeon_init_secondary(void)
|
||||
{
|
||||
const int coreid = cvmx_get_core_num();
|
||||
union cvmx_ciu_intx_sum0 interrupt_enable;
|
||||
|
||||
octeon_check_cpu_bist();
|
||||
octeon_init_cvmcount();
|
||||
/*
|
||||
pr_info("SMP: CPU%d (CoreId %lu) started\n", cpu, coreid);
|
||||
*/
|
||||
/* Enable Mailbox interrupts to this core. These are the only
|
||||
interrupts allowed on line 3 */
|
||||
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), 0xffffffff);
|
||||
interrupt_enable.u64 = 0;
|
||||
interrupt_enable.s.mbox = 0x3;
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), interrupt_enable.u64);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0);
|
||||
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0);
|
||||
/* Enable core interrupt processing for 2,3 and 7 */
|
||||
set_c0_status(0x8c01);
|
||||
}
|
||||
|
||||
/**
|
||||
* Callout to firmware before smp_init
|
||||
*
|
||||
*/
|
||||
void octeon_prepare_cpus(unsigned int max_cpus)
|
||||
{
|
||||
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
|
||||
if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED,
|
||||
"mailbox0", mailbox_interrupt)) {
|
||||
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
|
||||
}
|
||||
if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED,
|
||||
"mailbox1", mailbox_interrupt)) {
|
||||
panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Last chance for the board code to finish SMP initialization before
|
||||
* the CPU is "online".
|
||||
*/
|
||||
static void octeon_smp_finish(void)
|
||||
{
|
||||
#ifdef CONFIG_CAVIUM_GDB
|
||||
unsigned long tmp;
|
||||
/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
|
||||
to be not masked by this core so we know the signal is received by
|
||||
someone */
|
||||
asm volatile ("dmfc0 %0, $22\n"
|
||||
"ori %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
|
||||
#endif
|
||||
|
||||
octeon_user_io_init();
|
||||
|
||||
/* to generate the first CPU timer interrupt */
|
||||
write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
|
||||
}
|
||||
|
||||
/**
|
||||
* Hook for after all CPUs are online
|
||||
*/
|
||||
static void octeon_cpus_done(void)
|
||||
{
|
||||
#ifdef CONFIG_CAVIUM_GDB
|
||||
unsigned long tmp;
|
||||
/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
|
||||
to be not masked by this core so we know the signal is received by
|
||||
someone */
|
||||
asm volatile ("dmfc0 %0, $22\n"
|
||||
"ori %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
|
||||
#endif
|
||||
}
|
||||
|
||||
struct plat_smp_ops octeon_smp_ops = {
|
||||
.send_ipi_single = octeon_send_ipi_single,
|
||||
.send_ipi_mask = octeon_send_ipi_mask,
|
||||
.init_secondary = octeon_init_secondary,
|
||||
.smp_finish = octeon_smp_finish,
|
||||
.cpus_done = octeon_cpus_done,
|
||||
.boot_secondary = octeon_boot_secondary,
|
||||
.smp_setup = octeon_smp_setup,
|
||||
.prepare_cpus = octeon_prepare_cpus,
|
||||
};
|
|
@ -0,0 +1,78 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004 Cavium Networks
|
||||
*/
|
||||
#ifndef __ASM_MACH_CAVIUM_OCTEON_CPU_FEATURE_OVERRIDES_H
|
||||
#define __ASM_MACH_CAVIUM_OCTEON_CPU_FEATURE_OVERRIDES_H
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <asm/mipsregs.h>
|
||||
|
||||
/*
|
||||
* Cavium Octeons are MIPS64v2 processors
|
||||
*/
|
||||
#define cpu_dcache_line_size() 128
|
||||
#define cpu_icache_line_size() 128
|
||||
|
||||
|
||||
#define cpu_has_4kex 1
|
||||
#define cpu_has_3k_cache 0
|
||||
#define cpu_has_4k_cache 0
|
||||
#define cpu_has_tx39_cache 0
|
||||
#define cpu_has_fpu 0
|
||||
#define cpu_has_counter 1
|
||||
#define cpu_has_watch 1
|
||||
#define cpu_has_divec 1
|
||||
#define cpu_has_vce 0
|
||||
#define cpu_has_cache_cdex_p 0
|
||||
#define cpu_has_cache_cdex_s 0
|
||||
#define cpu_has_prefetch 1
|
||||
|
||||
/*
|
||||
* We should disable LL/SC on non SMP systems as it is faster to
|
||||
* disable interrupts for atomic access than a LL/SC. Unfortunatly we
|
||||
* cannot as this breaks asm/futex.h
|
||||
*/
|
||||
#define cpu_has_llsc 1
|
||||
#define cpu_has_vtag_icache 1
|
||||
#define cpu_has_dc_aliases 0
|
||||
#define cpu_has_ic_fills_f_dc 0
|
||||
#define cpu_has_64bits 1
|
||||
#define cpu_has_octeon_cache 1
|
||||
#define cpu_has_saa octeon_has_saa()
|
||||
#define cpu_has_mips32r1 0
|
||||
#define cpu_has_mips32r2 0
|
||||
#define cpu_has_mips64r1 0
|
||||
#define cpu_has_mips64r2 1
|
||||
#define cpu_has_dsp 0
|
||||
#define cpu_has_mipsmt 0
|
||||
#define cpu_has_userlocal 0
|
||||
#define cpu_has_vint 0
|
||||
#define cpu_has_veic 0
|
||||
#define ARCH_HAS_READ_CURRENT_TIMER 1
|
||||
#define ARCH_HAS_IRQ_PER_CPU 1
|
||||
#define ARCH_HAS_SPINLOCK_PREFETCH 1
|
||||
#define spin_lock_prefetch(x) prefetch(x)
|
||||
#define PREFETCH_STRIDE 128
|
||||
|
||||
static inline int read_current_timer(unsigned long *result)
|
||||
{
|
||||
asm volatile ("rdhwr %0,$31\n"
|
||||
#ifndef CONFIG_64BIT
|
||||
"\tsll %0, 0"
|
||||
#endif
|
||||
: "=r" (*result));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline int octeon_has_saa(void)
|
||||
{
|
||||
int id;
|
||||
asm volatile ("mfc0 %0, $15,0" : "=r" (id));
|
||||
return id >= 0x000d0300;
|
||||
}
|
||||
|
||||
#endif
|
64
arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
Normal file
64
arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
Normal file
|
@ -0,0 +1,64 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
|
||||
*
|
||||
*
|
||||
* Similar to mach-generic/dma-coherence.h except
|
||||
* plat_device_is_coherent hard coded to return 1.
|
||||
*
|
||||
*/
|
||||
#ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
|
||||
#define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
|
||||
|
||||
struct device;
|
||||
|
||||
dma_addr_t octeon_map_dma_mem(struct device *, void *, size_t);
|
||||
void octeon_unmap_dma_mem(struct device *, dma_addr_t);
|
||||
|
||||
static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
|
||||
size_t size)
|
||||
{
|
||||
return octeon_map_dma_mem(dev, addr, size);
|
||||
}
|
||||
|
||||
static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
|
||||
struct page *page)
|
||||
{
|
||||
return octeon_map_dma_mem(dev, page_address(page), PAGE_SIZE);
|
||||
}
|
||||
|
||||
static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
|
||||
{
|
||||
return dma_addr;
|
||||
}
|
||||
|
||||
static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
|
||||
{
|
||||
octeon_unmap_dma_mem(dev, dma_addr);
|
||||
}
|
||||
|
||||
static inline int plat_dma_supported(struct device *dev, u64 mask)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
static inline void plat_extra_sync_for_device(struct device *dev)
|
||||
{
|
||||
mb();
|
||||
}
|
||||
|
||||
static inline int plat_device_is_coherent(struct device *dev)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
static inline int plat_dma_mapping_error(struct device *dev,
|
||||
dma_addr_t dma_addr)
|
||||
{
|
||||
return dma_addr == -1;
|
||||
}
|
||||
|
||||
#endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
|
244
arch/mips/include/asm/mach-cavium-octeon/irq.h
Normal file
244
arch/mips/include/asm/mach-cavium-octeon/irq.h
Normal file
|
@ -0,0 +1,244 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004-2008 Cavium Networks
|
||||
*/
|
||||
#ifndef __OCTEON_IRQ_H__
|
||||
#define __OCTEON_IRQ_H__
|
||||
|
||||
#define NR_IRQS OCTEON_IRQ_LAST
|
||||
#define MIPS_CPU_IRQ_BASE OCTEON_IRQ_SW0
|
||||
|
||||
/* 0 - 7 represent the i8259 master */
|
||||
#define OCTEON_IRQ_I8259M0 0
|
||||
#define OCTEON_IRQ_I8259M1 1
|
||||
#define OCTEON_IRQ_I8259M2 2
|
||||
#define OCTEON_IRQ_I8259M3 3
|
||||
#define OCTEON_IRQ_I8259M4 4
|
||||
#define OCTEON_IRQ_I8259M5 5
|
||||
#define OCTEON_IRQ_I8259M6 6
|
||||
#define OCTEON_IRQ_I8259M7 7
|
||||
/* 8 - 15 represent the i8259 slave */
|
||||
#define OCTEON_IRQ_I8259S0 8
|
||||
#define OCTEON_IRQ_I8259S1 9
|
||||
#define OCTEON_IRQ_I8259S2 10
|
||||
#define OCTEON_IRQ_I8259S3 11
|
||||
#define OCTEON_IRQ_I8259S4 12
|
||||
#define OCTEON_IRQ_I8259S5 13
|
||||
#define OCTEON_IRQ_I8259S6 14
|
||||
#define OCTEON_IRQ_I8259S7 15
|
||||
/* 16 - 23 represent the 8 MIPS standard interrupt sources */
|
||||
#define OCTEON_IRQ_SW0 16
|
||||
#define OCTEON_IRQ_SW1 17
|
||||
#define OCTEON_IRQ_CIU0 18
|
||||
#define OCTEON_IRQ_CIU1 19
|
||||
#define OCTEON_IRQ_CIU4 20
|
||||
#define OCTEON_IRQ_5 21
|
||||
#define OCTEON_IRQ_PERF 22
|
||||
#define OCTEON_IRQ_TIMER 23
|
||||
/* 24 - 87 represent the sources in CIU_INTX_EN0 */
|
||||
#define OCTEON_IRQ_WORKQ0 24
|
||||
#define OCTEON_IRQ_WORKQ1 25
|
||||
#define OCTEON_IRQ_WORKQ2 26
|
||||
#define OCTEON_IRQ_WORKQ3 27
|
||||
#define OCTEON_IRQ_WORKQ4 28
|
||||
#define OCTEON_IRQ_WORKQ5 29
|
||||
#define OCTEON_IRQ_WORKQ6 30
|
||||
#define OCTEON_IRQ_WORKQ7 31
|
||||
#define OCTEON_IRQ_WORKQ8 32
|
||||
#define OCTEON_IRQ_WORKQ9 33
|
||||
#define OCTEON_IRQ_WORKQ10 34
|
||||
#define OCTEON_IRQ_WORKQ11 35
|
||||
#define OCTEON_IRQ_WORKQ12 36
|
||||
#define OCTEON_IRQ_WORKQ13 37
|
||||
#define OCTEON_IRQ_WORKQ14 38
|
||||
#define OCTEON_IRQ_WORKQ15 39
|
||||
#define OCTEON_IRQ_GPIO0 40
|
||||
#define OCTEON_IRQ_GPIO1 41
|
||||
#define OCTEON_IRQ_GPIO2 42
|
||||
#define OCTEON_IRQ_GPIO3 43
|
||||
#define OCTEON_IRQ_GPIO4 44
|
||||
#define OCTEON_IRQ_GPIO5 45
|
||||
#define OCTEON_IRQ_GPIO6 46
|
||||
#define OCTEON_IRQ_GPIO7 47
|
||||
#define OCTEON_IRQ_GPIO8 48
|
||||
#define OCTEON_IRQ_GPIO9 49
|
||||
#define OCTEON_IRQ_GPIO10 50
|
||||
#define OCTEON_IRQ_GPIO11 51
|
||||
#define OCTEON_IRQ_GPIO12 52
|
||||
#define OCTEON_IRQ_GPIO13 53
|
||||
#define OCTEON_IRQ_GPIO14 54
|
||||
#define OCTEON_IRQ_GPIO15 55
|
||||
#define OCTEON_IRQ_MBOX0 56
|
||||
#define OCTEON_IRQ_MBOX1 57
|
||||
#define OCTEON_IRQ_UART0 58
|
||||
#define OCTEON_IRQ_UART1 59
|
||||
#define OCTEON_IRQ_PCI_INT0 60
|
||||
#define OCTEON_IRQ_PCI_INT1 61
|
||||
#define OCTEON_IRQ_PCI_INT2 62
|
||||
#define OCTEON_IRQ_PCI_INT3 63
|
||||
#define OCTEON_IRQ_PCI_MSI0 64
|
||||
#define OCTEON_IRQ_PCI_MSI1 65
|
||||
#define OCTEON_IRQ_PCI_MSI2 66
|
||||
#define OCTEON_IRQ_PCI_MSI3 67
|
||||
#define OCTEON_IRQ_RESERVED68 68 /* Summary of CIU_INT_SUM1 */
|
||||
#define OCTEON_IRQ_TWSI 69
|
||||
#define OCTEON_IRQ_RML 70
|
||||
#define OCTEON_IRQ_TRACE 71
|
||||
#define OCTEON_IRQ_GMX_DRP0 72
|
||||
#define OCTEON_IRQ_GMX_DRP1 73
|
||||
#define OCTEON_IRQ_IPD_DRP 74
|
||||
#define OCTEON_IRQ_KEY_ZERO 75
|
||||
#define OCTEON_IRQ_TIMER0 76
|
||||
#define OCTEON_IRQ_TIMER1 77
|
||||
#define OCTEON_IRQ_TIMER2 78
|
||||
#define OCTEON_IRQ_TIMER3 79
|
||||
#define OCTEON_IRQ_USB0 80
|
||||
#define OCTEON_IRQ_PCM 81
|
||||
#define OCTEON_IRQ_MPI 82
|
||||
#define OCTEON_IRQ_TWSI2 83
|
||||
#define OCTEON_IRQ_POWIQ 84
|
||||
#define OCTEON_IRQ_IPDPPTHR 85
|
||||
#define OCTEON_IRQ_MII0 86
|
||||
#define OCTEON_IRQ_BOOTDMA 87
|
||||
/* 88 - 151 represent the sources in CIU_INTX_EN1 */
|
||||
#define OCTEON_IRQ_WDOG0 88
|
||||
#define OCTEON_IRQ_WDOG1 89
|
||||
#define OCTEON_IRQ_WDOG2 90
|
||||
#define OCTEON_IRQ_WDOG3 91
|
||||
#define OCTEON_IRQ_WDOG4 92
|
||||
#define OCTEON_IRQ_WDOG5 93
|
||||
#define OCTEON_IRQ_WDOG6 94
|
||||
#define OCTEON_IRQ_WDOG7 95
|
||||
#define OCTEON_IRQ_WDOG8 96
|
||||
#define OCTEON_IRQ_WDOG9 97
|
||||
#define OCTEON_IRQ_WDOG10 98
|
||||
#define OCTEON_IRQ_WDOG11 99
|
||||
#define OCTEON_IRQ_WDOG12 100
|
||||
#define OCTEON_IRQ_WDOG13 101
|
||||
#define OCTEON_IRQ_WDOG14 102
|
||||
#define OCTEON_IRQ_WDOG15 103
|
||||
#define OCTEON_IRQ_UART2 104
|
||||
#define OCTEON_IRQ_USB1 105
|
||||
#define OCTEON_IRQ_MII1 106
|
||||
#define OCTEON_IRQ_RESERVED107 107
|
||||
#define OCTEON_IRQ_RESERVED108 108
|
||||
#define OCTEON_IRQ_RESERVED109 109
|
||||
#define OCTEON_IRQ_RESERVED110 110
|
||||
#define OCTEON_IRQ_RESERVED111 111
|
||||
#define OCTEON_IRQ_RESERVED112 112
|
||||
#define OCTEON_IRQ_RESERVED113 113
|
||||
#define OCTEON_IRQ_RESERVED114 114
|
||||
#define OCTEON_IRQ_RESERVED115 115
|
||||
#define OCTEON_IRQ_RESERVED116 116
|
||||
#define OCTEON_IRQ_RESERVED117 117
|
||||
#define OCTEON_IRQ_RESERVED118 118
|
||||
#define OCTEON_IRQ_RESERVED119 119
|
||||
#define OCTEON_IRQ_RESERVED120 120
|
||||
#define OCTEON_IRQ_RESERVED121 121
|
||||
#define OCTEON_IRQ_RESERVED122 122
|
||||
#define OCTEON_IRQ_RESERVED123 123
|
||||
#define OCTEON_IRQ_RESERVED124 124
|
||||
#define OCTEON_IRQ_RESERVED125 125
|
||||
#define OCTEON_IRQ_RESERVED126 126
|
||||
#define OCTEON_IRQ_RESERVED127 127
|
||||
#define OCTEON_IRQ_RESERVED128 128
|
||||
#define OCTEON_IRQ_RESERVED129 129
|
||||
#define OCTEON_IRQ_RESERVED130 130
|
||||
#define OCTEON_IRQ_RESERVED131 131
|
||||
#define OCTEON_IRQ_RESERVED132 132
|
||||
#define OCTEON_IRQ_RESERVED133 133
|
||||
#define OCTEON_IRQ_RESERVED134 134
|
||||
#define OCTEON_IRQ_RESERVED135 135
|
||||
#define OCTEON_IRQ_RESERVED136 136
|
||||
#define OCTEON_IRQ_RESERVED137 137
|
||||
#define OCTEON_IRQ_RESERVED138 138
|
||||
#define OCTEON_IRQ_RESERVED139 139
|
||||
#define OCTEON_IRQ_RESERVED140 140
|
||||
#define OCTEON_IRQ_RESERVED141 141
|
||||
#define OCTEON_IRQ_RESERVED142 142
|
||||
#define OCTEON_IRQ_RESERVED143 143
|
||||
#define OCTEON_IRQ_RESERVED144 144
|
||||
#define OCTEON_IRQ_RESERVED145 145
|
||||
#define OCTEON_IRQ_RESERVED146 146
|
||||
#define OCTEON_IRQ_RESERVED147 147
|
||||
#define OCTEON_IRQ_RESERVED148 148
|
||||
#define OCTEON_IRQ_RESERVED149 149
|
||||
#define OCTEON_IRQ_RESERVED150 150
|
||||
#define OCTEON_IRQ_RESERVED151 151
|
||||
|
||||
#ifdef CONFIG_PCI_MSI
|
||||
/* 152 - 215 represent the MSI interrupts 0-63 */
|
||||
#define OCTEON_IRQ_MSI_BIT0 152
|
||||
#define OCTEON_IRQ_MSI_BIT1 153
|
||||
#define OCTEON_IRQ_MSI_BIT2 154
|
||||
#define OCTEON_IRQ_MSI_BIT3 155
|
||||
#define OCTEON_IRQ_MSI_BIT4 156
|
||||
#define OCTEON_IRQ_MSI_BIT5 157
|
||||
#define OCTEON_IRQ_MSI_BIT6 158
|
||||
#define OCTEON_IRQ_MSI_BIT7 159
|
||||
#define OCTEON_IRQ_MSI_BIT8 160
|
||||
#define OCTEON_IRQ_MSI_BIT9 161
|
||||
#define OCTEON_IRQ_MSI_BIT10 162
|
||||
#define OCTEON_IRQ_MSI_BIT11 163
|
||||
#define OCTEON_IRQ_MSI_BIT12 164
|
||||
#define OCTEON_IRQ_MSI_BIT13 165
|
||||
#define OCTEON_IRQ_MSI_BIT14 166
|
||||
#define OCTEON_IRQ_MSI_BIT15 167
|
||||
#define OCTEON_IRQ_MSI_BIT16 168
|
||||
#define OCTEON_IRQ_MSI_BIT17 169
|
||||
#define OCTEON_IRQ_MSI_BIT18 170
|
||||
#define OCTEON_IRQ_MSI_BIT19 171
|
||||
#define OCTEON_IRQ_MSI_BIT20 172
|
||||
#define OCTEON_IRQ_MSI_BIT21 173
|
||||
#define OCTEON_IRQ_MSI_BIT22 174
|
||||
#define OCTEON_IRQ_MSI_BIT23 175
|
||||
#define OCTEON_IRQ_MSI_BIT24 176
|
||||
#define OCTEON_IRQ_MSI_BIT25 177
|
||||
#define OCTEON_IRQ_MSI_BIT26 178
|
||||
#define OCTEON_IRQ_MSI_BIT27 179
|
||||
#define OCTEON_IRQ_MSI_BIT28 180
|
||||
#define OCTEON_IRQ_MSI_BIT29 181
|
||||
#define OCTEON_IRQ_MSI_BIT30 182
|
||||
#define OCTEON_IRQ_MSI_BIT31 183
|
||||
#define OCTEON_IRQ_MSI_BIT32 184
|
||||
#define OCTEON_IRQ_MSI_BIT33 185
|
||||
#define OCTEON_IRQ_MSI_BIT34 186
|
||||
#define OCTEON_IRQ_MSI_BIT35 187
|
||||
#define OCTEON_IRQ_MSI_BIT36 188
|
||||
#define OCTEON_IRQ_MSI_BIT37 189
|
||||
#define OCTEON_IRQ_MSI_BIT38 190
|
||||
#define OCTEON_IRQ_MSI_BIT39 191
|
||||
#define OCTEON_IRQ_MSI_BIT40 192
|
||||
#define OCTEON_IRQ_MSI_BIT41 193
|
||||
#define OCTEON_IRQ_MSI_BIT42 194
|
||||
#define OCTEON_IRQ_MSI_BIT43 195
|
||||
#define OCTEON_IRQ_MSI_BIT44 196
|
||||
#define OCTEON_IRQ_MSI_BIT45 197
|
||||
#define OCTEON_IRQ_MSI_BIT46 198
|
||||
#define OCTEON_IRQ_MSI_BIT47 199
|
||||
#define OCTEON_IRQ_MSI_BIT48 200
|
||||
#define OCTEON_IRQ_MSI_BIT49 201
|
||||
#define OCTEON_IRQ_MSI_BIT50 202
|
||||
#define OCTEON_IRQ_MSI_BIT51 203
|
||||
#define OCTEON_IRQ_MSI_BIT52 204
|
||||
#define OCTEON_IRQ_MSI_BIT53 205
|
||||
#define OCTEON_IRQ_MSI_BIT54 206
|
||||
#define OCTEON_IRQ_MSI_BIT55 207
|
||||
#define OCTEON_IRQ_MSI_BIT56 208
|
||||
#define OCTEON_IRQ_MSI_BIT57 209
|
||||
#define OCTEON_IRQ_MSI_BIT58 210
|
||||
#define OCTEON_IRQ_MSI_BIT59 211
|
||||
#define OCTEON_IRQ_MSI_BIT60 212
|
||||
#define OCTEON_IRQ_MSI_BIT61 213
|
||||
#define OCTEON_IRQ_MSI_BIT62 214
|
||||
#define OCTEON_IRQ_MSI_BIT63 215
|
||||
|
||||
#define OCTEON_IRQ_LAST 216
|
||||
#else
|
||||
#define OCTEON_IRQ_LAST 152
|
||||
#endif
|
||||
|
||||
#endif
|
131
arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
Normal file
131
arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
Normal file
|
@ -0,0 +1,131 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2005-2008 Cavium Networks, Inc
|
||||
*/
|
||||
#ifndef __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
|
||||
#define __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
|
||||
|
||||
|
||||
#define CP0_CYCLE_COUNTER $9, 6
|
||||
#define CP0_CVMCTL_REG $9, 7
|
||||
#define CP0_CVMMEMCTL_REG $11,7
|
||||
#define CP0_PRID_REG $15, 0
|
||||
#define CP0_PRID_OCTEON_PASS1 0x000d0000
|
||||
#define CP0_PRID_OCTEON_CN30XX 0x000d0200
|
||||
|
||||
.macro kernel_entry_setup
|
||||
# Registers set by bootloader:
|
||||
# (only 32 bits set by bootloader, all addresses are physical
|
||||
# addresses, and need to have the appropriate memory region set
|
||||
# by the kernel
|
||||
# a0 = argc
|
||||
# a1 = argv (kseg0 compat addr)
|
||||
# a2 = 1 if init core, zero otherwise
|
||||
# a3 = address of boot descriptor block
|
||||
.set push
|
||||
.set arch=octeon
|
||||
# Read the cavium mem control register
|
||||
dmfc0 v0, CP0_CVMMEMCTL_REG
|
||||
# Clear the lower 6 bits, the CVMSEG size
|
||||
dins v0, $0, 0, 6
|
||||
ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
|
||||
dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register
|
||||
dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register
|
||||
#ifdef CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED
|
||||
# Disable unaligned load/store support but leave HW fixup enabled
|
||||
or v0, v0, 0x5001
|
||||
xor v0, v0, 0x1001
|
||||
#else
|
||||
# Disable unaligned load/store and HW fixup support
|
||||
or v0, v0, 0x5001
|
||||
xor v0, v0, 0x5001
|
||||
#endif
|
||||
# Read the processor ID register
|
||||
mfc0 v1, CP0_PRID_REG
|
||||
# Disable instruction prefetching (Octeon Pass1 errata)
|
||||
or v0, v0, 0x2000
|
||||
# Skip reenable of prefetching for Octeon Pass1
|
||||
beq v1, CP0_PRID_OCTEON_PASS1, skip
|
||||
nop
|
||||
# Reenable instruction prefetching, not on Pass1
|
||||
xor v0, v0, 0x2000
|
||||
# Strip off pass number off of processor id
|
||||
srl v1, 8
|
||||
sll v1, 8
|
||||
# CN30XX needs some extra stuff turned off for better performance
|
||||
bne v1, CP0_PRID_OCTEON_CN30XX, skip
|
||||
nop
|
||||
# CN30XX Use random Icache replacement
|
||||
or v0, v0, 0x400
|
||||
# CN30XX Disable instruction prefetching
|
||||
or v0, v0, 0x2000
|
||||
skip:
|
||||
# Write the cavium control register
|
||||
dmtc0 v0, CP0_CVMCTL_REG
|
||||
sync
|
||||
# Flush dcache after config change
|
||||
cache 9, 0($0)
|
||||
# Get my core id
|
||||
rdhwr v0, $0
|
||||
# Jump the master to kernel_entry
|
||||
bne a2, zero, octeon_main_processor
|
||||
nop
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
|
||||
#
|
||||
# All cores other than the master need to wait here for SMP bootstrap
|
||||
# to begin
|
||||
#
|
||||
|
||||
# This is the variable where the next core to boot os stored
|
||||
PTR_LA t0, octeon_processor_boot
|
||||
octeon_spin_wait_boot:
|
||||
# Get the core id of the next to be booted
|
||||
LONG_L t1, (t0)
|
||||
# Keep looping if it isn't me
|
||||
bne t1, v0, octeon_spin_wait_boot
|
||||
nop
|
||||
# Get my GP from the global variable
|
||||
PTR_LA t0, octeon_processor_gp
|
||||
LONG_L gp, (t0)
|
||||
# Get my SP from the global variable
|
||||
PTR_LA t0, octeon_processor_sp
|
||||
LONG_L sp, (t0)
|
||||
# Set the SP global variable to zero so the master knows we've started
|
||||
LONG_S zero, (t0)
|
||||
#ifdef __OCTEON__
|
||||
syncw
|
||||
syncw
|
||||
#else
|
||||
sync
|
||||
#endif
|
||||
# Jump to the normal Linux SMP entry point
|
||||
j smp_bootstrap
|
||||
nop
|
||||
#else /* CONFIG_SMP */
|
||||
|
||||
#
|
||||
# Someone tried to boot SMP with a non SMP kernel. All extra cores
|
||||
# will halt here.
|
||||
#
|
||||
octeon_wait_forever:
|
||||
wait
|
||||
b octeon_wait_forever
|
||||
nop
|
||||
|
||||
#endif /* CONFIG_SMP */
|
||||
octeon_main_processor:
|
||||
.set pop
|
||||
.endm
|
||||
|
||||
/*
|
||||
* Do SMP slave processor setup necessary before we can savely execute C code.
|
||||
*/
|
||||
.macro smp_slave_setup
|
||||
.endm
|
||||
|
||||
#endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */
|
26
arch/mips/include/asm/mach-cavium-octeon/war.h
Normal file
26
arch/mips/include/asm/mach-cavium-octeon/war.h
Normal file
|
@ -0,0 +1,26 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
|
||||
* Copyright (C) 2008 Cavium Networks <support@caviumnetworks.com>
|
||||
*/
|
||||
#ifndef __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
|
||||
#define __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
|
||||
|
||||
#define R4600_V1_INDEX_ICACHEOP_WAR 0
|
||||
#define R4600_V1_HIT_CACHEOP_WAR 0
|
||||
#define R4600_V2_HIT_CACHEOP_WAR 0
|
||||
#define R5432_CP0_INTERRUPT_WAR 0
|
||||
#define BCM1250_M3_WAR 0
|
||||
#define SIBYTE_1956_WAR 0
|
||||
#define MIPS4K_ICACHE_REFILL_WAR 0
|
||||
#define MIPS_CACHE_SYNC_WAR 0
|
||||
#define TX49XX_ICACHE_INDEX_INV_WAR 0
|
||||
#define RM9000_CDEX_SMP_WAR 0
|
||||
#define ICACHE_REFILLS_WORKAROUND_WAR 0
|
||||
#define R10000_LLSC_WAR 0
|
||||
#define MIPS34K_MISSED_ITLB_WAR 0
|
||||
|
||||
#endif /* __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H */
|
248
arch/mips/include/asm/octeon/octeon.h
Normal file
248
arch/mips/include/asm/octeon/octeon.h
Normal file
|
@ -0,0 +1,248 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2004-2008 Cavium Networks
|
||||
*/
|
||||
#ifndef __ASM_OCTEON_OCTEON_H
|
||||
#define __ASM_OCTEON_OCTEON_H
|
||||
|
||||
#include "cvmx.h"
|
||||
|
||||
extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
|
||||
uint64_t alignment,
|
||||
uint64_t min_addr,
|
||||
uint64_t max_addr,
|
||||
int do_locking);
|
||||
extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
|
||||
int do_locking);
|
||||
extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
|
||||
uint64_t min_addr, uint64_t max_addr,
|
||||
int do_locking);
|
||||
extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
|
||||
char *name);
|
||||
extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
|
||||
uint64_t max_addr, uint64_t align,
|
||||
char *name);
|
||||
extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
|
||||
char *name);
|
||||
extern int octeon_bootmem_free_named(char *name);
|
||||
extern void octeon_bootmem_lock(void);
|
||||
extern void octeon_bootmem_unlock(void);
|
||||
|
||||
extern int octeon_is_simulation(void);
|
||||
extern int octeon_is_pci_host(void);
|
||||
extern int octeon_usb_is_ref_clk(void);
|
||||
extern uint64_t octeon_get_clock_rate(void);
|
||||
extern const char *octeon_board_type_string(void);
|
||||
extern const char *octeon_get_pci_interrupts(void);
|
||||
extern int octeon_get_southbridge_interrupt(void);
|
||||
extern int octeon_get_boot_coremask(void);
|
||||
extern int octeon_get_boot_num_arguments(void);
|
||||
extern const char *octeon_get_boot_argument(int arg);
|
||||
extern void octeon_hal_setup_reserved32(void);
|
||||
extern void octeon_user_io_init(void);
|
||||
struct octeon_cop2_state;
|
||||
extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state);
|
||||
extern void octeon_crypto_disable(struct octeon_cop2_state *state,
|
||||
unsigned long flags);
|
||||
|
||||
extern void octeon_init_cvmcount(void);
|
||||
|
||||
#define OCTEON_ARGV_MAX_ARGS 64
|
||||
#define OCTOEN_SERIAL_LEN 20
|
||||
|
||||
struct octeon_boot_descriptor {
|
||||
/* Start of block referenced by assembly code - do not change! */
|
||||
uint32_t desc_version;
|
||||
uint32_t desc_size;
|
||||
uint64_t stack_top;
|
||||
uint64_t heap_base;
|
||||
uint64_t heap_end;
|
||||
/* Only used by bootloader */
|
||||
uint64_t entry_point;
|
||||
uint64_t desc_vaddr;
|
||||
/* End of This block referenced by assembly code - do not change! */
|
||||
uint32_t exception_base_addr;
|
||||
uint32_t stack_size;
|
||||
uint32_t heap_size;
|
||||
/* Argc count for application. */
|
||||
uint32_t argc;
|
||||
uint32_t argv[OCTEON_ARGV_MAX_ARGS];
|
||||
|
||||
#define BOOT_FLAG_INIT_CORE (1 << 0)
|
||||
#define OCTEON_BL_FLAG_DEBUG (1 << 1)
|
||||
#define OCTEON_BL_FLAG_NO_MAGIC (1 << 2)
|
||||
/* If set, use uart1 for console */
|
||||
#define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3)
|
||||
/* If set, use PCI console */
|
||||
#define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4)
|
||||
/* Call exit on break on serial port */
|
||||
#define OCTEON_BL_FLAG_BREAK (1 << 5)
|
||||
|
||||
uint32_t flags;
|
||||
uint32_t core_mask;
|
||||
/* DRAM size in megabyes. */
|
||||
uint32_t dram_size;
|
||||
/* physical address of free memory descriptor block. */
|
||||
uint32_t phy_mem_desc_addr;
|
||||
/* used to pass flags from app to debugger. */
|
||||
uint32_t debugger_flags_base_addr;
|
||||
/* CPU clock speed, in hz. */
|
||||
uint32_t eclock_hz;
|
||||
/* DRAM clock speed, in hz. */
|
||||
uint32_t dclock_hz;
|
||||
/* SPI4 clock in hz. */
|
||||
uint32_t spi_clock_hz;
|
||||
uint16_t board_type;
|
||||
uint8_t board_rev_major;
|
||||
uint8_t board_rev_minor;
|
||||
uint16_t chip_type;
|
||||
uint8_t chip_rev_major;
|
||||
uint8_t chip_rev_minor;
|
||||
char board_serial_number[OCTOEN_SERIAL_LEN];
|
||||
uint8_t mac_addr_base[6];
|
||||
uint8_t mac_addr_count;
|
||||
uint64_t cvmx_desc_vaddr;
|
||||
};
|
||||
|
||||
union octeon_cvmemctl {
|
||||
uint64_t u64;
|
||||
struct {
|
||||
/* RO 1 = BIST fail, 0 = BIST pass */
|
||||
uint64_t tlbbist:1;
|
||||
/* RO 1 = BIST fail, 0 = BIST pass */
|
||||
uint64_t l1cbist:1;
|
||||
/* RO 1 = BIST fail, 0 = BIST pass */
|
||||
uint64_t l1dbist:1;
|
||||
/* RO 1 = BIST fail, 0 = BIST pass */
|
||||
uint64_t dcmbist:1;
|
||||
/* RO 1 = BIST fail, 0 = BIST pass */
|
||||
uint64_t ptgbist:1;
|
||||
/* RO 1 = BIST fail, 0 = BIST pass */
|
||||
uint64_t wbfbist:1;
|
||||
/* Reserved */
|
||||
uint64_t reserved:22;
|
||||
/* R/W If set, marked write-buffer entries time out
|
||||
* the same as as other entries; if clear, marked
|
||||
* write-buffer entries use the maximum timeout. */
|
||||
uint64_t dismarkwblongto:1;
|
||||
/* R/W If set, a merged store does not clear the
|
||||
* write-buffer entry timeout state. */
|
||||
uint64_t dismrgclrwbto:1;
|
||||
/* R/W Two bits that are the MSBs of the resultant
|
||||
* CVMSEG LM word location for an IOBDMA. The other 8
|
||||
* bits come from the SCRADDR field of the IOBDMA. */
|
||||
uint64_t iobdmascrmsb:2;
|
||||
/* R/W If set, SYNCWS and SYNCS only order marked
|
||||
* stores; if clear, SYNCWS and SYNCS only order
|
||||
* unmarked stores. SYNCWSMARKED has no effect when
|
||||
* DISSYNCWS is set. */
|
||||
uint64_t syncwsmarked:1;
|
||||
/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
|
||||
* SYNC. */
|
||||
uint64_t dissyncws:1;
|
||||
/* R/W If set, no stall happens on write buffer
|
||||
* full. */
|
||||
uint64_t diswbfst:1;
|
||||
/* R/W If set (and SX set), supervisor-level
|
||||
* loads/stores can use XKPHYS addresses with
|
||||
* VA<48>==0 */
|
||||
uint64_t xkmemenas:1;
|
||||
/* R/W If set (and UX set), user-level loads/stores
|
||||
* can use XKPHYS addresses with VA<48>==0 */
|
||||
uint64_t xkmemenau:1;
|
||||
/* R/W If set (and SX set), supervisor-level
|
||||
* loads/stores can use XKPHYS addresses with
|
||||
* VA<48>==1 */
|
||||
uint64_t xkioenas:1;
|
||||
/* R/W If set (and UX set), user-level loads/stores
|
||||
* can use XKPHYS addresses with VA<48>==1 */
|
||||
uint64_t xkioenau:1;
|
||||
/* R/W If set, all stores act as SYNCW (NOMERGE must
|
||||
* be set when this is set) RW, reset to 0. */
|
||||
uint64_t allsyncw:1;
|
||||
/* R/W If set, no stores merge, and all stores reach
|
||||
* the coherent bus in order. */
|
||||
uint64_t nomerge:1;
|
||||
/* R/W Selects the bit in the counter used for DID
|
||||
* time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
|
||||
* 214. Actual time-out is between 1x and 2x this
|
||||
* interval. For example, with DIDTTO=3, expiration
|
||||
* interval is between 16K and 32K. */
|
||||
uint64_t didtto:2;
|
||||
/* R/W If set, the (mem) CSR clock never turns off. */
|
||||
uint64_t csrckalwys:1;
|
||||
/* R/W If set, mclk never turns off. */
|
||||
uint64_t mclkalwys:1;
|
||||
/* R/W Selects the bit in the counter used for write
|
||||
* buffer flush time-outs (WBFLT+11) is the bit
|
||||
* position in an internal counter used to determine
|
||||
* expiration. The write buffer expires between 1x and
|
||||
* 2x this interval. For example, with WBFLT = 0, a
|
||||
* write buffer expires between 2K and 4K cycles after
|
||||
* the write buffer entry is allocated. */
|
||||
uint64_t wbfltime:3;
|
||||
/* R/W If set, do not put Istream in the L2 cache. */
|
||||
uint64_t istrnol2:1;
|
||||
/* R/W The write buffer threshold. */
|
||||
uint64_t wbthresh:4;
|
||||
/* Reserved */
|
||||
uint64_t reserved2:2;
|
||||
/* R/W If set, CVMSEG is available for loads/stores in
|
||||
* kernel/debug mode. */
|
||||
uint64_t cvmsegenak:1;
|
||||
/* R/W If set, CVMSEG is available for loads/stores in
|
||||
* supervisor mode. */
|
||||
uint64_t cvmsegenas:1;
|
||||
/* R/W If set, CVMSEG is available for loads/stores in
|
||||
* user mode. */
|
||||
uint64_t cvmsegenau:1;
|
||||
/* R/W Size of local memory in cache blocks, 54 (6912
|
||||
* bytes) is max legal value. */
|
||||
uint64_t lmemsz:6;
|
||||
} s;
|
||||
};
|
||||
|
||||
struct octeon_cf_data {
|
||||
unsigned long base_region_bias;
|
||||
unsigned int base_region; /* The chip select region used by CF */
|
||||
int is16bit; /* 0 - 8bit, !0 - 16bit */
|
||||
int dma_engine; /* -1 for no DMA */
|
||||
};
|
||||
|
||||
extern void octeon_write_lcd(const char *s);
|
||||
extern void octeon_check_cpu_bist(void);
|
||||
extern int octeon_get_boot_debug_flag(void);
|
||||
extern int octeon_get_boot_uart(void);
|
||||
|
||||
struct uart_port;
|
||||
extern unsigned int octeon_serial_in(struct uart_port *, int);
|
||||
extern void octeon_serial_out(struct uart_port *, int, int);
|
||||
|
||||
/**
|
||||
* Write a 32bit value to the Octeon NPI register space
|
||||
*
|
||||
* @address: Address to write to
|
||||
* @val: Value to write
|
||||
*/
|
||||
static inline void octeon_npi_write32(uint64_t address, uint32_t val)
|
||||
{
|
||||
cvmx_write64_uint32(address ^ 4, val);
|
||||
cvmx_read64_uint32(address ^ 4);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Read a 32bit value from the Octeon NPI register space
|
||||
*
|
||||
* @address: Address to read
|
||||
* Returns The result
|
||||
*/
|
||||
static inline uint32_t octeon_npi_read32(uint64_t address)
|
||||
{
|
||||
return cvmx_read64_uint32(address ^ 4);
|
||||
}
|
||||
|
||||
#endif /* __ASM_OCTEON_OCTEON_H */
|
506
arch/mips/kernel/octeon_switch.S
Normal file
506
arch/mips/kernel/octeon_switch.S
Normal file
|
@ -0,0 +1,506 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
|
||||
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
|
||||
* Copyright (C) 1994, 1995, 1996, by Andreas Busse
|
||||
* Copyright (C) 1999 Silicon Graphics, Inc.
|
||||
* Copyright (C) 2000 MIPS Technologies, Inc.
|
||||
* written by Carsten Langgaard, carstenl@mips.com
|
||||
*/
|
||||
#include <asm/asm.h>
|
||||
#include <asm/cachectl.h>
|
||||
#include <asm/fpregdef.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/asm-offsets.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/pgtable-bits.h>
|
||||
#include <asm/regdef.h>
|
||||
#include <asm/stackframe.h>
|
||||
#include <asm/thread_info.h>
|
||||
|
||||
#include <asm/asmmacro.h>
|
||||
|
||||
/*
|
||||
* Offset to the current process status flags, the first 32 bytes of the
|
||||
* stack are not used.
|
||||
*/
|
||||
#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
|
||||
|
||||
/*
|
||||
* task_struct *resume(task_struct *prev, task_struct *next,
|
||||
* struct thread_info *next_ti)
|
||||
*/
|
||||
.align 7
|
||||
LEAF(resume)
|
||||
.set arch=octeon
|
||||
#ifndef CONFIG_CPU_HAS_LLSC
|
||||
sw zero, ll_bit
|
||||
#endif
|
||||
mfc0 t1, CP0_STATUS
|
||||
LONG_S t1, THREAD_STATUS(a0)
|
||||
cpu_save_nonscratch a0
|
||||
LONG_S ra, THREAD_REG31(a0)
|
||||
|
||||
/* check if we need to save COP2 registers */
|
||||
PTR_L t2, TASK_THREAD_INFO(a0)
|
||||
LONG_L t0, ST_OFF(t2)
|
||||
bbit0 t0, 30, 1f
|
||||
|
||||
/* Disable COP2 in the stored process state */
|
||||
li t1, ST0_CU2
|
||||
xor t0, t1
|
||||
LONG_S t0, ST_OFF(t2)
|
||||
|
||||
/* Enable COP2 so we can save it */
|
||||
mfc0 t0, CP0_STATUS
|
||||
or t0, t1
|
||||
mtc0 t0, CP0_STATUS
|
||||
|
||||
/* Save COP2 */
|
||||
daddu a0, THREAD_CP2
|
||||
jal octeon_cop2_save
|
||||
dsubu a0, THREAD_CP2
|
||||
|
||||
/* Disable COP2 now that we are done */
|
||||
mfc0 t0, CP0_STATUS
|
||||
li t1, ST0_CU2
|
||||
xor t0, t1
|
||||
mtc0 t0, CP0_STATUS
|
||||
|
||||
1:
|
||||
#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
|
||||
/* Check if we need to store CVMSEG state */
|
||||
mfc0 t0, $11,7 /* CvmMemCtl */
|
||||
bbit0 t0, 6, 3f /* Is user access enabled? */
|
||||
|
||||
/* Store the CVMSEG state */
|
||||
/* Extract the size of CVMSEG */
|
||||
andi t0, 0x3f
|
||||
/* Multiply * (cache line size/sizeof(long)/2) */
|
||||
sll t0, 7-LONGLOG-1
|
||||
li t1, -32768 /* Base address of CVMSEG */
|
||||
LONG_ADDI t2, a0, THREAD_CVMSEG /* Where to store CVMSEG to */
|
||||
synciobdma
|
||||
2:
|
||||
.set noreorder
|
||||
LONG_L t8, 0(t1) /* Load from CVMSEG */
|
||||
subu t0, 1 /* Decrement loop var */
|
||||
LONG_L t9, LONGSIZE(t1)/* Load from CVMSEG */
|
||||
LONG_ADDU t1, LONGSIZE*2 /* Increment loc in CVMSEG */
|
||||
LONG_S t8, 0(t2) /* Store CVMSEG to thread storage */
|
||||
LONG_ADDU t2, LONGSIZE*2 /* Increment loc in thread storage */
|
||||
bnez t0, 2b /* Loop until we've copied it all */
|
||||
LONG_S t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */
|
||||
.set reorder
|
||||
|
||||
/* Disable access to CVMSEG */
|
||||
mfc0 t0, $11,7 /* CvmMemCtl */
|
||||
xori t0, t0, 0x40 /* Bit 6 is CVMSEG user enable */
|
||||
mtc0 t0, $11,7 /* CvmMemCtl */
|
||||
#endif
|
||||
3:
|
||||
/*
|
||||
* The order of restoring the registers takes care of the race
|
||||
* updating $28, $29 and kernelsp without disabling ints.
|
||||
*/
|
||||
move $28, a2
|
||||
cpu_restore_nonscratch a1
|
||||
|
||||
#if (_THREAD_SIZE - 32) < 0x8000
|
||||
PTR_ADDIU t0, $28, _THREAD_SIZE - 32
|
||||
#else
|
||||
PTR_LI t0, _THREAD_SIZE - 32
|
||||
PTR_ADDU t0, $28
|
||||
#endif
|
||||
set_saved_sp t0, t1, t2
|
||||
|
||||
mfc0 t1, CP0_STATUS /* Do we really need this? */
|
||||
li a3, 0xff01
|
||||
and t1, a3
|
||||
LONG_L a2, THREAD_STATUS(a1)
|
||||
nor a3, $0, a3
|
||||
and a2, a3
|
||||
or a2, t1
|
||||
mtc0 a2, CP0_STATUS
|
||||
move v0, a0
|
||||
jr ra
|
||||
END(resume)
|
||||
|
||||
/*
|
||||
* void octeon_cop2_save(struct octeon_cop2_state *a0)
|
||||
*/
|
||||
.align 7
|
||||
LEAF(octeon_cop2_save)
|
||||
|
||||
dmfc0 t9, $9,7 /* CvmCtl register. */
|
||||
|
||||
/* Save the COP2 CRC state */
|
||||
dmfc2 t0, 0x0201
|
||||
dmfc2 t1, 0x0202
|
||||
dmfc2 t2, 0x0200
|
||||
sd t0, OCTEON_CP2_CRC_IV(a0)
|
||||
sd t1, OCTEON_CP2_CRC_LENGTH(a0)
|
||||
sd t2, OCTEON_CP2_CRC_POLY(a0)
|
||||
/* Skip next instructions if CvmCtl[NODFA_CP2] set */
|
||||
bbit1 t9, 28, 1f
|
||||
|
||||
/* Save the LLM state */
|
||||
dmfc2 t0, 0x0402
|
||||
dmfc2 t1, 0x040A
|
||||
sd t0, OCTEON_CP2_LLM_DAT(a0)
|
||||
sd t1, OCTEON_CP2_LLM_DAT+8(a0)
|
||||
|
||||
1: bbit1 t9, 26, 3f /* done if CvmCtl[NOCRYPTO] set */
|
||||
|
||||
/* Save the COP2 crypto state */
|
||||
/* this part is mostly common to both pass 1 and later revisions */
|
||||
dmfc2 t0, 0x0084
|
||||
dmfc2 t1, 0x0080
|
||||
dmfc2 t2, 0x0081
|
||||
dmfc2 t3, 0x0082
|
||||
sd t0, OCTEON_CP2_3DES_IV(a0)
|
||||
dmfc2 t0, 0x0088
|
||||
sd t1, OCTEON_CP2_3DES_KEY(a0)
|
||||
dmfc2 t1, 0x0111 /* only necessary for pass 1 */
|
||||
sd t2, OCTEON_CP2_3DES_KEY+8(a0)
|
||||
dmfc2 t2, 0x0102
|
||||
sd t3, OCTEON_CP2_3DES_KEY+16(a0)
|
||||
dmfc2 t3, 0x0103
|
||||
sd t0, OCTEON_CP2_3DES_RESULT(a0)
|
||||
dmfc2 t0, 0x0104
|
||||
sd t1, OCTEON_CP2_AES_INP0(a0) /* only necessary for pass 1 */
|
||||
dmfc2 t1, 0x0105
|
||||
sd t2, OCTEON_CP2_AES_IV(a0)
|
||||
dmfc2 t2, 0x0106
|
||||
sd t3, OCTEON_CP2_AES_IV+8(a0)
|
||||
dmfc2 t3, 0x0107
|
||||
sd t0, OCTEON_CP2_AES_KEY(a0)
|
||||
dmfc2 t0, 0x0110
|
||||
sd t1, OCTEON_CP2_AES_KEY+8(a0)
|
||||
dmfc2 t1, 0x0100
|
||||
sd t2, OCTEON_CP2_AES_KEY+16(a0)
|
||||
dmfc2 t2, 0x0101
|
||||
sd t3, OCTEON_CP2_AES_KEY+24(a0)
|
||||
mfc0 t3, $15,0 /* Get the processor ID register */
|
||||
sd t0, OCTEON_CP2_AES_KEYLEN(a0)
|
||||
li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
|
||||
sd t1, OCTEON_CP2_AES_RESULT(a0)
|
||||
sd t2, OCTEON_CP2_AES_RESULT+8(a0)
|
||||
/* Skip to the Pass1 version of the remainder of the COP2 state */
|
||||
beq t3, t0, 2f
|
||||
|
||||
/* the non-pass1 state when !CvmCtl[NOCRYPTO] */
|
||||
dmfc2 t1, 0x0240
|
||||
dmfc2 t2, 0x0241
|
||||
dmfc2 t3, 0x0242
|
||||
dmfc2 t0, 0x0243
|
||||
sd t1, OCTEON_CP2_HSH_DATW(a0)
|
||||
dmfc2 t1, 0x0244
|
||||
sd t2, OCTEON_CP2_HSH_DATW+8(a0)
|
||||
dmfc2 t2, 0x0245
|
||||
sd t3, OCTEON_CP2_HSH_DATW+16(a0)
|
||||
dmfc2 t3, 0x0246
|
||||
sd t0, OCTEON_CP2_HSH_DATW+24(a0)
|
||||
dmfc2 t0, 0x0247
|
||||
sd t1, OCTEON_CP2_HSH_DATW+32(a0)
|
||||
dmfc2 t1, 0x0248
|
||||
sd t2, OCTEON_CP2_HSH_DATW+40(a0)
|
||||
dmfc2 t2, 0x0249
|
||||
sd t3, OCTEON_CP2_HSH_DATW+48(a0)
|
||||
dmfc2 t3, 0x024A
|
||||
sd t0, OCTEON_CP2_HSH_DATW+56(a0)
|
||||
dmfc2 t0, 0x024B
|
||||
sd t1, OCTEON_CP2_HSH_DATW+64(a0)
|
||||
dmfc2 t1, 0x024C
|
||||
sd t2, OCTEON_CP2_HSH_DATW+72(a0)
|
||||
dmfc2 t2, 0x024D
|
||||
sd t3, OCTEON_CP2_HSH_DATW+80(a0)
|
||||
dmfc2 t3, 0x024E
|
||||
sd t0, OCTEON_CP2_HSH_DATW+88(a0)
|
||||
dmfc2 t0, 0x0250
|
||||
sd t1, OCTEON_CP2_HSH_DATW+96(a0)
|
||||
dmfc2 t1, 0x0251
|
||||
sd t2, OCTEON_CP2_HSH_DATW+104(a0)
|
||||
dmfc2 t2, 0x0252
|
||||
sd t3, OCTEON_CP2_HSH_DATW+112(a0)
|
||||
dmfc2 t3, 0x0253
|
||||
sd t0, OCTEON_CP2_HSH_IVW(a0)
|
||||
dmfc2 t0, 0x0254
|
||||
sd t1, OCTEON_CP2_HSH_IVW+8(a0)
|
||||
dmfc2 t1, 0x0255
|
||||
sd t2, OCTEON_CP2_HSH_IVW+16(a0)
|
||||
dmfc2 t2, 0x0256
|
||||
sd t3, OCTEON_CP2_HSH_IVW+24(a0)
|
||||
dmfc2 t3, 0x0257
|
||||
sd t0, OCTEON_CP2_HSH_IVW+32(a0)
|
||||
dmfc2 t0, 0x0258
|
||||
sd t1, OCTEON_CP2_HSH_IVW+40(a0)
|
||||
dmfc2 t1, 0x0259
|
||||
sd t2, OCTEON_CP2_HSH_IVW+48(a0)
|
||||
dmfc2 t2, 0x025E
|
||||
sd t3, OCTEON_CP2_HSH_IVW+56(a0)
|
||||
dmfc2 t3, 0x025A
|
||||
sd t0, OCTEON_CP2_GFM_MULT(a0)
|
||||
dmfc2 t0, 0x025B
|
||||
sd t1, OCTEON_CP2_GFM_MULT+8(a0)
|
||||
sd t2, OCTEON_CP2_GFM_POLY(a0)
|
||||
sd t3, OCTEON_CP2_GFM_RESULT(a0)
|
||||
sd t0, OCTEON_CP2_GFM_RESULT+8(a0)
|
||||
jr ra
|
||||
|
||||
2: /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */
|
||||
dmfc2 t3, 0x0040
|
||||
dmfc2 t0, 0x0041
|
||||
dmfc2 t1, 0x0042
|
||||
dmfc2 t2, 0x0043
|
||||
sd t3, OCTEON_CP2_HSH_DATW(a0)
|
||||
dmfc2 t3, 0x0044
|
||||
sd t0, OCTEON_CP2_HSH_DATW+8(a0)
|
||||
dmfc2 t0, 0x0045
|
||||
sd t1, OCTEON_CP2_HSH_DATW+16(a0)
|
||||
dmfc2 t1, 0x0046
|
||||
sd t2, OCTEON_CP2_HSH_DATW+24(a0)
|
||||
dmfc2 t2, 0x0048
|
||||
sd t3, OCTEON_CP2_HSH_DATW+32(a0)
|
||||
dmfc2 t3, 0x0049
|
||||
sd t0, OCTEON_CP2_HSH_DATW+40(a0)
|
||||
dmfc2 t0, 0x004A
|
||||
sd t1, OCTEON_CP2_HSH_DATW+48(a0)
|
||||
sd t2, OCTEON_CP2_HSH_IVW(a0)
|
||||
sd t3, OCTEON_CP2_HSH_IVW+8(a0)
|
||||
sd t0, OCTEON_CP2_HSH_IVW+16(a0)
|
||||
|
||||
3: /* pass 1 or CvmCtl[NOCRYPTO] set */
|
||||
jr ra
|
||||
END(octeon_cop2_save)
|
||||
|
||||
/*
|
||||
* void octeon_cop2_restore(struct octeon_cop2_state *a0)
|
||||
*/
|
||||
.align 7
|
||||
.set push
|
||||
.set noreorder
|
||||
LEAF(octeon_cop2_restore)
|
||||
/* First cache line was prefetched before the call */
|
||||
pref 4, 128(a0)
|
||||
dmfc0 t9, $9,7 /* CvmCtl register. */
|
||||
|
||||
pref 4, 256(a0)
|
||||
ld t0, OCTEON_CP2_CRC_IV(a0)
|
||||
pref 4, 384(a0)
|
||||
ld t1, OCTEON_CP2_CRC_LENGTH(a0)
|
||||
ld t2, OCTEON_CP2_CRC_POLY(a0)
|
||||
|
||||
/* Restore the COP2 CRC state */
|
||||
dmtc2 t0, 0x0201
|
||||
dmtc2 t1, 0x1202
|
||||
bbit1 t9, 28, 2f /* Skip LLM if CvmCtl[NODFA_CP2] is set */
|
||||
dmtc2 t2, 0x4200
|
||||
|
||||
/* Restore the LLM state */
|
||||
ld t0, OCTEON_CP2_LLM_DAT(a0)
|
||||
ld t1, OCTEON_CP2_LLM_DAT+8(a0)
|
||||
dmtc2 t0, 0x0402
|
||||
dmtc2 t1, 0x040A
|
||||
|
||||
2:
|
||||
bbit1 t9, 26, done_restore /* done if CvmCtl[NOCRYPTO] set */
|
||||
nop
|
||||
|
||||
/* Restore the COP2 crypto state common to pass 1 and pass 2 */
|
||||
ld t0, OCTEON_CP2_3DES_IV(a0)
|
||||
ld t1, OCTEON_CP2_3DES_KEY(a0)
|
||||
ld t2, OCTEON_CP2_3DES_KEY+8(a0)
|
||||
dmtc2 t0, 0x0084
|
||||
ld t0, OCTEON_CP2_3DES_KEY+16(a0)
|
||||
dmtc2 t1, 0x0080
|
||||
ld t1, OCTEON_CP2_3DES_RESULT(a0)
|
||||
dmtc2 t2, 0x0081
|
||||
ld t2, OCTEON_CP2_AES_INP0(a0) /* only really needed for pass 1 */
|
||||
dmtc2 t0, 0x0082
|
||||
ld t0, OCTEON_CP2_AES_IV(a0)
|
||||
dmtc2 t1, 0x0098
|
||||
ld t1, OCTEON_CP2_AES_IV+8(a0)
|
||||
dmtc2 t2, 0x010A /* only really needed for pass 1 */
|
||||
ld t2, OCTEON_CP2_AES_KEY(a0)
|
||||
dmtc2 t0, 0x0102
|
||||
ld t0, OCTEON_CP2_AES_KEY+8(a0)
|
||||
dmtc2 t1, 0x0103
|
||||
ld t1, OCTEON_CP2_AES_KEY+16(a0)
|
||||
dmtc2 t2, 0x0104
|
||||
ld t2, OCTEON_CP2_AES_KEY+24(a0)
|
||||
dmtc2 t0, 0x0105
|
||||
ld t0, OCTEON_CP2_AES_KEYLEN(a0)
|
||||
dmtc2 t1, 0x0106
|
||||
ld t1, OCTEON_CP2_AES_RESULT(a0)
|
||||
dmtc2 t2, 0x0107
|
||||
ld t2, OCTEON_CP2_AES_RESULT+8(a0)
|
||||
mfc0 t3, $15,0 /* Get the processor ID register */
|
||||
dmtc2 t0, 0x0110
|
||||
li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
|
||||
dmtc2 t1, 0x0100
|
||||
bne t0, t3, 3f /* Skip the next stuff for non-pass1 */
|
||||
dmtc2 t2, 0x0101
|
||||
|
||||
/* this code is specific for pass 1 */
|
||||
ld t0, OCTEON_CP2_HSH_DATW(a0)
|
||||
ld t1, OCTEON_CP2_HSH_DATW+8(a0)
|
||||
ld t2, OCTEON_CP2_HSH_DATW+16(a0)
|
||||
dmtc2 t0, 0x0040
|
||||
ld t0, OCTEON_CP2_HSH_DATW+24(a0)
|
||||
dmtc2 t1, 0x0041
|
||||
ld t1, OCTEON_CP2_HSH_DATW+32(a0)
|
||||
dmtc2 t2, 0x0042
|
||||
ld t2, OCTEON_CP2_HSH_DATW+40(a0)
|
||||
dmtc2 t0, 0x0043
|
||||
ld t0, OCTEON_CP2_HSH_DATW+48(a0)
|
||||
dmtc2 t1, 0x0044
|
||||
ld t1, OCTEON_CP2_HSH_IVW(a0)
|
||||
dmtc2 t2, 0x0045
|
||||
ld t2, OCTEON_CP2_HSH_IVW+8(a0)
|
||||
dmtc2 t0, 0x0046
|
||||
ld t0, OCTEON_CP2_HSH_IVW+16(a0)
|
||||
dmtc2 t1, 0x0048
|
||||
dmtc2 t2, 0x0049
|
||||
b done_restore /* unconditional branch */
|
||||
dmtc2 t0, 0x004A
|
||||
|
||||
3: /* this is post-pass1 code */
|
||||
ld t2, OCTEON_CP2_HSH_DATW(a0)
|
||||
ld t0, OCTEON_CP2_HSH_DATW+8(a0)
|
||||
ld t1, OCTEON_CP2_HSH_DATW+16(a0)
|
||||
dmtc2 t2, 0x0240
|
||||
ld t2, OCTEON_CP2_HSH_DATW+24(a0)
|
||||
dmtc2 t0, 0x0241
|
||||
ld t0, OCTEON_CP2_HSH_DATW+32(a0)
|
||||
dmtc2 t1, 0x0242
|
||||
ld t1, OCTEON_CP2_HSH_DATW+40(a0)
|
||||
dmtc2 t2, 0x0243
|
||||
ld t2, OCTEON_CP2_HSH_DATW+48(a0)
|
||||
dmtc2 t0, 0x0244
|
||||
ld t0, OCTEON_CP2_HSH_DATW+56(a0)
|
||||
dmtc2 t1, 0x0245
|
||||
ld t1, OCTEON_CP2_HSH_DATW+64(a0)
|
||||
dmtc2 t2, 0x0246
|
||||
ld t2, OCTEON_CP2_HSH_DATW+72(a0)
|
||||
dmtc2 t0, 0x0247
|
||||
ld t0, OCTEON_CP2_HSH_DATW+80(a0)
|
||||
dmtc2 t1, 0x0248
|
||||
ld t1, OCTEON_CP2_HSH_DATW+88(a0)
|
||||
dmtc2 t2, 0x0249
|
||||
ld t2, OCTEON_CP2_HSH_DATW+96(a0)
|
||||
dmtc2 t0, 0x024A
|
||||
ld t0, OCTEON_CP2_HSH_DATW+104(a0)
|
||||
dmtc2 t1, 0x024B
|
||||
ld t1, OCTEON_CP2_HSH_DATW+112(a0)
|
||||
dmtc2 t2, 0x024C
|
||||
ld t2, OCTEON_CP2_HSH_IVW(a0)
|
||||
dmtc2 t0, 0x024D
|
||||
ld t0, OCTEON_CP2_HSH_IVW+8(a0)
|
||||
dmtc2 t1, 0x024E
|
||||
ld t1, OCTEON_CP2_HSH_IVW+16(a0)
|
||||
dmtc2 t2, 0x0250
|
||||
ld t2, OCTEON_CP2_HSH_IVW+24(a0)
|
||||
dmtc2 t0, 0x0251
|
||||
ld t0, OCTEON_CP2_HSH_IVW+32(a0)
|
||||
dmtc2 t1, 0x0252
|
||||
ld t1, OCTEON_CP2_HSH_IVW+40(a0)
|
||||
dmtc2 t2, 0x0253
|
||||
ld t2, OCTEON_CP2_HSH_IVW+48(a0)
|
||||
dmtc2 t0, 0x0254
|
||||
ld t0, OCTEON_CP2_HSH_IVW+56(a0)
|
||||
dmtc2 t1, 0x0255
|
||||
ld t1, OCTEON_CP2_GFM_MULT(a0)
|
||||
dmtc2 t2, 0x0256
|
||||
ld t2, OCTEON_CP2_GFM_MULT+8(a0)
|
||||
dmtc2 t0, 0x0257
|
||||
ld t0, OCTEON_CP2_GFM_POLY(a0)
|
||||
dmtc2 t1, 0x0258
|
||||
ld t1, OCTEON_CP2_GFM_RESULT(a0)
|
||||
dmtc2 t2, 0x0259
|
||||
ld t2, OCTEON_CP2_GFM_RESULT+8(a0)
|
||||
dmtc2 t0, 0x025E
|
||||
dmtc2 t1, 0x025A
|
||||
dmtc2 t2, 0x025B
|
||||
|
||||
done_restore:
|
||||
jr ra
|
||||
nop
|
||||
END(octeon_cop2_restore)
|
||||
.set pop
|
||||
|
||||
/*
|
||||
* void octeon_mult_save()
|
||||
* sp is assumed to point to a struct pt_regs
|
||||
*
|
||||
* NOTE: This is called in SAVE_SOME in stackframe.h. It can only
|
||||
* safely modify k0 and k1.
|
||||
*/
|
||||
.align 7
|
||||
.set push
|
||||
.set noreorder
|
||||
LEAF(octeon_mult_save)
|
||||
dmfc0 k0, $9,7 /* CvmCtl register. */
|
||||
bbit1 k0, 27, 1f /* Skip CvmCtl[NOMUL] */
|
||||
nop
|
||||
|
||||
/* Save the multiplier state */
|
||||
v3mulu k0, $0, $0
|
||||
v3mulu k1, $0, $0
|
||||
sd k0, PT_MTP(sp) /* PT_MTP has P0 */
|
||||
v3mulu k0, $0, $0
|
||||
sd k1, PT_MTP+8(sp) /* PT_MTP+8 has P1 */
|
||||
ori k1, $0, 1
|
||||
v3mulu k1, k1, $0
|
||||
sd k0, PT_MTP+16(sp) /* PT_MTP+16 has P2 */
|
||||
v3mulu k0, $0, $0
|
||||
sd k1, PT_MPL(sp) /* PT_MPL has MPL0 */
|
||||
v3mulu k1, $0, $0
|
||||
sd k0, PT_MPL+8(sp) /* PT_MPL+8 has MPL1 */
|
||||
jr ra
|
||||
sd k1, PT_MPL+16(sp) /* PT_MPL+16 has MPL2 */
|
||||
|
||||
1: /* Resume here if CvmCtl[NOMUL] */
|
||||
jr ra
|
||||
END(octeon_mult_save)
|
||||
.set pop
|
||||
|
||||
/*
|
||||
* void octeon_mult_restore()
|
||||
* sp is assumed to point to a struct pt_regs
|
||||
*
|
||||
* NOTE: This is called in RESTORE_SOME in stackframe.h.
|
||||
*/
|
||||
.align 7
|
||||
.set push
|
||||
.set noreorder
|
||||
LEAF(octeon_mult_restore)
|
||||
dmfc0 k1, $9,7 /* CvmCtl register. */
|
||||
ld v0, PT_MPL(sp) /* MPL0 */
|
||||
ld v1, PT_MPL+8(sp) /* MPL1 */
|
||||
ld k0, PT_MPL+16(sp) /* MPL2 */
|
||||
bbit1 k1, 27, 1f /* Skip CvmCtl[NOMUL] */
|
||||
/* Normally falls through, so no time wasted here */
|
||||
nop
|
||||
|
||||
/* Restore the multiplier state */
|
||||
ld k1, PT_MTP+16(sp) /* P2 */
|
||||
MTM0 v0 /* MPL0 */
|
||||
ld v0, PT_MTP+8(sp) /* P1 */
|
||||
MTM1 v1 /* MPL1 */
|
||||
ld v1, PT_MTP(sp) /* P0 */
|
||||
MTM2 k0 /* MPL2 */
|
||||
MTP2 k1 /* P2 */
|
||||
MTP1 v0 /* P1 */
|
||||
jr ra
|
||||
MTP0 v1 /* P0 */
|
||||
|
||||
1: /* Resume here if CvmCtl[NOMUL] */
|
||||
jr ra
|
||||
nop
|
||||
END(octeon_mult_restore)
|
||||
.set pop
|
||||
|
307
arch/mips/mm/c-octeon.c
Normal file
307
arch/mips/mm/c-octeon.c
Normal file
|
@ -0,0 +1,307 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2005-2007 Cavium Networks
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/cpu.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/bcache.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/cacheops.h>
|
||||
#include <asm/cpu-features.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/r4kcache.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/mmu_context.h>
|
||||
#include <asm/war.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
|
||||
unsigned long long cache_err_dcache[NR_CPUS];
|
||||
|
||||
/**
|
||||
* Octeon automatically flushes the dcache on tlb changes, so
|
||||
* from Linux's viewpoint it acts much like a physically
|
||||
* tagged cache. No flushing is needed
|
||||
*
|
||||
*/
|
||||
static void octeon_flush_data_cache_page(unsigned long addr)
|
||||
{
|
||||
/* Nothing to do */
|
||||
}
|
||||
|
||||
static inline void octeon_local_flush_icache(void)
|
||||
{
|
||||
asm volatile ("synci 0($0)");
|
||||
}
|
||||
|
||||
/*
|
||||
* Flush local I-cache for the specified range.
|
||||
*/
|
||||
static void local_octeon_flush_icache_range(unsigned long start,
|
||||
unsigned long end)
|
||||
{
|
||||
octeon_local_flush_icache();
|
||||
}
|
||||
|
||||
/**
|
||||
* Flush caches as necessary for all cores affected by a
|
||||
* vma. If no vma is supplied, all cores are flushed.
|
||||
*
|
||||
* @vma: VMA to flush or NULL to flush all icaches.
|
||||
*/
|
||||
static void octeon_flush_icache_all_cores(struct vm_area_struct *vma)
|
||||
{
|
||||
extern void octeon_send_ipi_single(int cpu, unsigned int action);
|
||||
#ifdef CONFIG_SMP
|
||||
int cpu;
|
||||
cpumask_t mask;
|
||||
#endif
|
||||
|
||||
mb();
|
||||
octeon_local_flush_icache();
|
||||
#ifdef CONFIG_SMP
|
||||
preempt_disable();
|
||||
cpu = smp_processor_id();
|
||||
|
||||
/*
|
||||
* If we have a vma structure, we only need to worry about
|
||||
* cores it has been used on
|
||||
*/
|
||||
if (vma)
|
||||
mask = vma->vm_mm->cpu_vm_mask;
|
||||
else
|
||||
mask = cpu_online_map;
|
||||
cpu_clear(cpu, mask);
|
||||
for_each_cpu_mask(cpu, mask)
|
||||
octeon_send_ipi_single(cpu, SMP_ICACHE_FLUSH);
|
||||
|
||||
preempt_enable();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Called to flush the icache on all cores
|
||||
*/
|
||||
static void octeon_flush_icache_all(void)
|
||||
{
|
||||
octeon_flush_icache_all_cores(NULL);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Called to flush all memory associated with a memory
|
||||
* context.
|
||||
*
|
||||
* @mm: Memory context to flush
|
||||
*/
|
||||
static void octeon_flush_cache_mm(struct mm_struct *mm)
|
||||
{
|
||||
/*
|
||||
* According to the R4K version of this file, CPUs without
|
||||
* dcache aliases don't need to do anything here
|
||||
*/
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Flush a range of kernel addresses out of the icache
|
||||
*
|
||||
*/
|
||||
static void octeon_flush_icache_range(unsigned long start, unsigned long end)
|
||||
{
|
||||
octeon_flush_icache_all_cores(NULL);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Flush the icache for a trampoline. These are used for interrupt
|
||||
* and exception hooking.
|
||||
*
|
||||
* @addr: Address to flush
|
||||
*/
|
||||
static void octeon_flush_cache_sigtramp(unsigned long addr)
|
||||
{
|
||||
struct vm_area_struct *vma;
|
||||
|
||||
vma = find_vma(current->mm, addr);
|
||||
octeon_flush_icache_all_cores(vma);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Flush a range out of a vma
|
||||
*
|
||||
* @vma: VMA to flush
|
||||
* @start:
|
||||
* @end:
|
||||
*/
|
||||
static void octeon_flush_cache_range(struct vm_area_struct *vma,
|
||||
unsigned long start, unsigned long end)
|
||||
{
|
||||
if (vma->vm_flags & VM_EXEC)
|
||||
octeon_flush_icache_all_cores(vma);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Flush a specific page of a vma
|
||||
*
|
||||
* @vma: VMA to flush page for
|
||||
* @page: Page to flush
|
||||
* @pfn:
|
||||
*/
|
||||
static void octeon_flush_cache_page(struct vm_area_struct *vma,
|
||||
unsigned long page, unsigned long pfn)
|
||||
{
|
||||
if (vma->vm_flags & VM_EXEC)
|
||||
octeon_flush_icache_all_cores(vma);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Probe Octeon's caches
|
||||
*
|
||||
*/
|
||||
static void __devinit probe_octeon(void)
|
||||
{
|
||||
unsigned long icache_size;
|
||||
unsigned long dcache_size;
|
||||
unsigned int config1;
|
||||
struct cpuinfo_mips *c = ¤t_cpu_data;
|
||||
|
||||
switch (c->cputype) {
|
||||
case CPU_CAVIUM_OCTEON:
|
||||
config1 = read_c0_config1();
|
||||
c->icache.linesz = 2 << ((config1 >> 19) & 7);
|
||||
c->icache.sets = 64 << ((config1 >> 22) & 7);
|
||||
c->icache.ways = 1 + ((config1 >> 16) & 7);
|
||||
c->icache.flags |= MIPS_CACHE_VTAG;
|
||||
icache_size =
|
||||
c->icache.sets * c->icache.ways * c->icache.linesz;
|
||||
c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
|
||||
c->dcache.linesz = 128;
|
||||
if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
|
||||
c->dcache.sets = 1; /* CN3XXX has one Dcache set */
|
||||
else
|
||||
c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
|
||||
c->dcache.ways = 64;
|
||||
dcache_size =
|
||||
c->dcache.sets * c->dcache.ways * c->dcache.linesz;
|
||||
c->dcache.waybit = ffs(dcache_size / c->dcache.ways) - 1;
|
||||
c->options |= MIPS_CPU_PREFETCH;
|
||||
break;
|
||||
|
||||
default:
|
||||
panic("Unsupported Cavium Networks CPU type\n");
|
||||
break;
|
||||
}
|
||||
|
||||
/* compute a couple of other cache variables */
|
||||
c->icache.waysize = icache_size / c->icache.ways;
|
||||
c->dcache.waysize = dcache_size / c->dcache.ways;
|
||||
|
||||
c->icache.sets = icache_size / (c->icache.linesz * c->icache.ways);
|
||||
c->dcache.sets = dcache_size / (c->dcache.linesz * c->dcache.ways);
|
||||
|
||||
if (smp_processor_id() == 0) {
|
||||
pr_notice("Primary instruction cache %ldkB, %s, %d way, "
|
||||
"%d sets, linesize %d bytes.\n",
|
||||
icache_size >> 10,
|
||||
cpu_has_vtag_icache ?
|
||||
"virtually tagged" : "physically tagged",
|
||||
c->icache.ways, c->icache.sets, c->icache.linesz);
|
||||
|
||||
pr_notice("Primary data cache %ldkB, %d-way, %d sets, "
|
||||
"linesize %d bytes.\n",
|
||||
dcache_size >> 10, c->dcache.ways,
|
||||
c->dcache.sets, c->dcache.linesz);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* Setup the Octeon cache flush routines
|
||||
*
|
||||
*/
|
||||
void __devinit octeon_cache_init(void)
|
||||
{
|
||||
extern unsigned long ebase;
|
||||
extern char except_vec2_octeon;
|
||||
|
||||
memcpy((void *)(ebase + 0x100), &except_vec2_octeon, 0x80);
|
||||
octeon_flush_cache_sigtramp(ebase + 0x100);
|
||||
|
||||
probe_octeon();
|
||||
|
||||
shm_align_mask = PAGE_SIZE - 1;
|
||||
|
||||
flush_cache_all = octeon_flush_icache_all;
|
||||
__flush_cache_all = octeon_flush_icache_all;
|
||||
flush_cache_mm = octeon_flush_cache_mm;
|
||||
flush_cache_page = octeon_flush_cache_page;
|
||||
flush_cache_range = octeon_flush_cache_range;
|
||||
flush_cache_sigtramp = octeon_flush_cache_sigtramp;
|
||||
flush_icache_all = octeon_flush_icache_all;
|
||||
flush_data_cache_page = octeon_flush_data_cache_page;
|
||||
flush_icache_range = octeon_flush_icache_range;
|
||||
local_flush_icache_range = local_octeon_flush_icache_range;
|
||||
|
||||
build_clear_page();
|
||||
build_copy_page();
|
||||
}
|
||||
|
||||
/**
|
||||
* Handle a cache error exception
|
||||
*/
|
||||
|
||||
static void cache_parity_error_octeon(int non_recoverable)
|
||||
{
|
||||
unsigned long coreid = cvmx_get_core_num();
|
||||
uint64_t icache_err = read_octeon_c0_icacheerr();
|
||||
|
||||
pr_err("Cache error exception:\n");
|
||||
pr_err("cp0_errorepc == %lx\n", read_c0_errorepc());
|
||||
if (icache_err & 1) {
|
||||
pr_err("CacheErr (Icache) == %llx\n",
|
||||
(unsigned long long)icache_err);
|
||||
write_octeon_c0_icacheerr(0);
|
||||
}
|
||||
if (cache_err_dcache[coreid] & 1) {
|
||||
pr_err("CacheErr (Dcache) == %llx\n",
|
||||
(unsigned long long)cache_err_dcache[coreid]);
|
||||
cache_err_dcache[coreid] = 0;
|
||||
}
|
||||
|
||||
if (non_recoverable)
|
||||
panic("Can't handle cache error: nested exception");
|
||||
}
|
||||
|
||||
/**
|
||||
* Called when the the exception is not recoverable
|
||||
*/
|
||||
|
||||
asmlinkage void cache_parity_error_octeon_recoverable(void)
|
||||
{
|
||||
cache_parity_error_octeon(0);
|
||||
}
|
||||
|
||||
/**
|
||||
* Called when the the exception is recoverable
|
||||
*/
|
||||
|
||||
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
|
||||
{
|
||||
cache_parity_error_octeon(1);
|
||||
}
|
||||
|
70
arch/mips/mm/cex-oct.S
Normal file
70
arch/mips/mm/cex-oct.S
Normal file
|
@ -0,0 +1,70 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2006 Cavium Networks
|
||||
* Cache error handler
|
||||
*/
|
||||
|
||||
#include <asm/asm.h>
|
||||
#include <asm/regdef.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/stackframe.h>
|
||||
|
||||
/*
|
||||
* Handle cache error. Indicate to the second level handler whether
|
||||
* the exception is recoverable.
|
||||
*/
|
||||
LEAF(except_vec2_octeon)
|
||||
|
||||
.set push
|
||||
.set mips64r2
|
||||
.set noreorder
|
||||
.set noat
|
||||
|
||||
|
||||
/* due to an errata we need to read the COP0 CacheErr (Dcache)
|
||||
* before any cache/DRAM access */
|
||||
|
||||
rdhwr k0, $0 /* get core_id */
|
||||
PTR_LA k1, cache_err_dcache
|
||||
sll k0, k0, 3
|
||||
PTR_ADDU k1, k0, k1 /* k1 = &cache_err_dcache[core_id] */
|
||||
|
||||
dmfc0 k0, CP0_CACHEERR, 1
|
||||
sd k0, (k1)
|
||||
dmtc0 $0, CP0_CACHEERR, 1
|
||||
|
||||
/* check whether this is a nested exception */
|
||||
mfc0 k1, CP0_STATUS
|
||||
andi k1, k1, ST0_EXL
|
||||
beqz k1, 1f
|
||||
nop
|
||||
j cache_parity_error_octeon_non_recoverable
|
||||
nop
|
||||
|
||||
/* exception is recoverable */
|
||||
1: j handle_cache_err
|
||||
nop
|
||||
|
||||
.set pop
|
||||
END(except_vec2_octeon)
|
||||
|
||||
/* We need to jump to handle_cache_err so that the previous handler
|
||||
* can fit within 0x80 bytes. We also move from 0xFFFFFFFFAXXXXXXX
|
||||
* space (uncached) to the 0xFFFFFFFF8XXXXXXX space (cached). */
|
||||
LEAF(handle_cache_err)
|
||||
.set push
|
||||
.set noreorder
|
||||
.set noat
|
||||
|
||||
SAVE_ALL
|
||||
KMODE
|
||||
jal cache_parity_error_octeon_recoverable
|
||||
nop
|
||||
j ret_from_exception
|
||||
nop
|
||||
|
||||
.set pop
|
||||
END(handle_cache_err)
|
Loading…
Reference in a new issue