avr32: Add MIMC200 board support
Please consider the following patch which adds support for a new AVR32 based board. The board is closely based on Atmel's NGW100 reference board, but has an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>hifive-unleashed-5.1
Mark Jackson
Haavard Skinnemoen
parent
198f29358a
commit
5b50c166b7
|
|
@ -123,6 +123,10 @@ config BOARD_ATNGW100
|
|||
config BOARD_FAVR_32
|
||||
bool "Favr-32 LCD-board"
|
||||
select CPU_AT32AP7000
|
||||
|
||||
config BOARD_MIMC200
|
||||
bool "MIMC200 CPU board"
|
||||
select CPU_AT32AP7000
|
||||
endchoice
|
||||
|
||||
source "arch/avr32/boards/atstk1000/Kconfig"
|
||||
|
|
|
|||
|
|
@ -34,6 +34,7 @@ core-y += $(machdirs)
|
|||
core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/
|
||||
core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
|
||||
core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/
|
||||
core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/
|
||||
core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
|
||||
core-y += arch/avr32/kernel/
|
||||
core-y += arch/avr32/mm/
|
||||
|
|
|
|||
|
|
@ -0,0 +1 @@
|
|||
obj-y += setup.o flash.o fram.o
|
||||
|
|
@ -0,0 +1,143 @@
|
|||
/*
|
||||
* MIMC200 board-specific flash initialization
|
||||
*
|
||||
* Copyright (C) 2008 Mercury IMC Ltd
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
|
||||
#include <mach/smc.h>
|
||||
|
||||
static struct smc_timing flash_timing __initdata = {
|
||||
.ncs_read_setup = 0,
|
||||
.nrd_setup = 15,
|
||||
.ncs_write_setup = 0,
|
||||
.nwe_setup = 0,
|
||||
|
||||
.ncs_read_pulse = 115,
|
||||
.nrd_pulse = 110,
|
||||
.ncs_write_pulse = 60,
|
||||
.nwe_pulse = 60,
|
||||
|
||||
.read_cycle = 115,
|
||||
.write_cycle = 100,
|
||||
};
|
||||
|
||||
static struct smc_config flash_config __initdata = {
|
||||
.bus_width = 2,
|
||||
.nrd_controlled = 1,
|
||||
.nwe_controlled = 1,
|
||||
.byte_write = 1,
|
||||
};
|
||||
|
||||
/* system flash definition */
|
||||
|
||||
static struct mtd_partition flash_parts_system[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.offset = 0x00000000,
|
||||
.size = 0x00020000, /* 128 KiB */
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
{
|
||||
.name = "root",
|
||||
.offset = 0x00020000,
|
||||
.size = 0x007c0000,
|
||||
},
|
||||
{
|
||||
.name = "splash",
|
||||
.offset = 0x007e0000,
|
||||
.size = 0x00010000, /* 64KiB */
|
||||
},
|
||||
{
|
||||
.name = "env",
|
||||
.offset = 0x007f0000,
|
||||
.size = 0x00010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data flash_system = {
|
||||
.width = 2,
|
||||
.nr_parts = ARRAY_SIZE(flash_parts_system),
|
||||
.parts = flash_parts_system,
|
||||
};
|
||||
|
||||
static struct resource flash_resource_system = {
|
||||
.start = 0x00000000,
|
||||
.end = 0x007fffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device flash_device_system = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.resource = &flash_resource_system,
|
||||
.num_resources = 1,
|
||||
.dev = {
|
||||
.platform_data = &flash_system,
|
||||
},
|
||||
};
|
||||
|
||||
/* data flash definition */
|
||||
|
||||
static struct mtd_partition flash_parts_data[] = {
|
||||
{
|
||||
.name = "data",
|
||||
.offset = 0x00000000,
|
||||
.size = 0x00800000,
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data flash_data = {
|
||||
.width = 2,
|
||||
.nr_parts = ARRAY_SIZE(flash_parts_data),
|
||||
.parts = flash_parts_data,
|
||||
};
|
||||
|
||||
static struct resource flash_resource_data = {
|
||||
.start = 0x08000000,
|
||||
.end = 0x087fffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device flash_device_data = {
|
||||
.name = "physmap-flash",
|
||||
.id = 1,
|
||||
.resource = &flash_resource_data,
|
||||
.num_resources = 1,
|
||||
.dev = {
|
||||
.platform_data = &flash_data,
|
||||
},
|
||||
};
|
||||
|
||||
/* This needs to be called after the SMC has been initialized */
|
||||
static int __init mimc200_flash_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
smc_set_timing(&flash_config, &flash_timing);
|
||||
ret = smc_set_configuration(0, &flash_config);
|
||||
if (ret < 0) {
|
||||
printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n");
|
||||
return ret;
|
||||
}
|
||||
ret = smc_set_configuration(1, &flash_config);
|
||||
if (ret < 0) {
|
||||
printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
platform_device_register(&flash_device_system);
|
||||
platform_device_register(&flash_device_data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
device_initcall(mimc200_flash_init);
|
||||
|
|
@ -0,0 +1,80 @@
|
|||
/*
|
||||
* FRAM driver for MIMC200 board
|
||||
*
|
||||
* Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
|
||||
*
|
||||
* This module adds *very* simply support for the system's FRAM device.
|
||||
* At the moment, this is hard-coded to the MIMC200 platform, and only
|
||||
* supports mmap().
|
||||
*/
|
||||
|
||||
#define FRAM_VERSION "1.0"
|
||||
|
||||
#include <linux/miscdevice.h>
|
||||
#include <linux/proc_fs.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#define FRAM_BASE 0xac000000
|
||||
#define FRAM_SIZE 0x20000
|
||||
|
||||
/*
|
||||
* The are the file operation function for user access to /dev/fram
|
||||
*/
|
||||
|
||||
static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = remap_pfn_range(vma,
|
||||
vma->vm_start,
|
||||
virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
|
||||
vma->vm_end-vma->vm_start,
|
||||
PAGE_SHARED);
|
||||
|
||||
if (ret != 0)
|
||||
return -EAGAIN;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct file_operations fram_fops = {
|
||||
.owner = THIS_MODULE,
|
||||
.mmap = fram_mmap,
|
||||
};
|
||||
|
||||
#define FRAM_MINOR 0
|
||||
|
||||
static struct miscdevice fram_dev = {
|
||||
FRAM_MINOR,
|
||||
"fram",
|
||||
&fram_fops
|
||||
};
|
||||
|
||||
static int __init
|
||||
fram_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = misc_register(&fram_dev);
|
||||
if (ret) {
|
||||
printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
|
||||
FRAM_MINOR);
|
||||
return ret;
|
||||
}
|
||||
printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit
|
||||
fram_cleanup_module(void)
|
||||
{
|
||||
misc_deregister(&fram_dev);
|
||||
}
|
||||
|
||||
module_init(fram_init);
|
||||
module_exit(fram_cleanup_module);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
MODULE_ALIAS_MISCDEV(FRAM_MINOR);
|
||||
|
|
@ -0,0 +1,237 @@
|
|||
/*
|
||||
* Board-specific setup code for the MIMC200
|
||||
*
|
||||
* Copyright (C) 2008 Mercury IMC Ltd
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
extern struct atmel_lcdfb_info mimc200_lcdc_data;
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/linkage.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/eeprom.h>
|
||||
|
||||
#include <video/atmel_lcdc.h>
|
||||
#include <linux/fb.h>
|
||||
|
||||
#include <asm/atmel-mci.h>
|
||||
#include <linux/io.h>
|
||||
#include <asm/setup.h>
|
||||
|
||||
#include <mach/at32ap700x.h>
|
||||
#include <mach/board.h>
|
||||
#include <mach/init.h>
|
||||
#include <mach/portmux.h>
|
||||
|
||||
/* Oscillator frequencies. These are board-specific */
|
||||
unsigned long at32_board_osc_rates[3] = {
|
||||
[0] = 32768, /* 32.768 kHz on RTC osc */
|
||||
[1] = 10000000, /* 10 MHz on osc0 */
|
||||
[2] = 12000000, /* 12 MHz on osc1 */
|
||||
};
|
||||
|
||||
/* Initialized by bootloader-specific startup code. */
|
||||
struct tag *bootloader_tags __initdata;
|
||||
|
||||
static struct fb_videomode __initdata tx14d14_modes[] = {
|
||||
{
|
||||
.name = "640x480 @ 60",
|
||||
.refresh = 60,
|
||||
.xres = 640, .yres = 480,
|
||||
.pixclock = KHZ2PICOS(11666),
|
||||
|
||||
.left_margin = 80, .right_margin = 1,
|
||||
.upper_margin = 13, .lower_margin = 2,
|
||||
.hsync_len = 64, .vsync_len = 1,
|
||||
|
||||
.sync = 0,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
},
|
||||
};
|
||||
|
||||
static struct fb_monspecs __initdata mimc200_default_monspecs = {
|
||||
.manufacturer = "HIT",
|
||||
.monitor = "TX14D14VM1BAB",
|
||||
.modedb = tx14d14_modes,
|
||||
.modedb_len = ARRAY_SIZE(tx14d14_modes),
|
||||
.hfmin = 14820,
|
||||
.hfmax = 22230,
|
||||
.vfmin = 60,
|
||||
.vfmax = 73.3,
|
||||
.dclkmax = 25200000,
|
||||
};
|
||||
|
||||
struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
|
||||
.default_bpp = 16,
|
||||
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
|
||||
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
|
||||
| ATMEL_LCDC_INVCLK
|
||||
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
|
||||
| ATMEL_LCDC_MEMOR_BIG),
|
||||
.default_monspecs = &mimc200_default_monspecs,
|
||||
.guard_time = 2,
|
||||
};
|
||||
|
||||
struct eth_addr {
|
||||
u8 addr[6];
|
||||
};
|
||||
static struct eth_addr __initdata hw_addr[2];
|
||||
static struct eth_platform_data __initdata eth_data[2];
|
||||
|
||||
static struct spi_eeprom eeprom_25lc010 = {
|
||||
.name = "25lc010",
|
||||
.byte_len = 128,
|
||||
.page_size = 16,
|
||||
.flags = EE_ADDR1,
|
||||
};
|
||||
|
||||
static struct spi_board_info spi0_board_info[] __initdata = {
|
||||
{
|
||||
.modalias = "rtc-ds1390",
|
||||
.max_speed_hz = 4000000,
|
||||
.chip_select = 2,
|
||||
},
|
||||
{
|
||||
.modalias = "at25",
|
||||
.max_speed_hz = 1000000,
|
||||
.chip_select = 1,
|
||||
.mode = SPI_MODE_3,
|
||||
.platform_data = &eeprom_25lc010,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mci_platform_data __initdata mci0_data = {
|
||||
.slot[0] = {
|
||||
.bus_width = 4,
|
||||
.detect_pin = GPIO_PIN_PA(26),
|
||||
.wp_pin = GPIO_PIN_PA(27),
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* The next two functions should go away as the boot loader is
|
||||
* supposed to initialize the macb address registers with a valid
|
||||
* ethernet address. But we need to keep it around for a while until
|
||||
* we can be reasonably sure the boot loader does this.
|
||||
*
|
||||
* The phy_id is ignored as the driver will probe for it.
|
||||
*/
|
||||
static int __init parse_tag_ethernet(struct tag *tag)
|
||||
{
|
||||
int i;
|
||||
|
||||
i = tag->u.ethernet.mac_index;
|
||||
if (i < ARRAY_SIZE(hw_addr))
|
||||
memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
|
||||
sizeof(hw_addr[i].addr));
|
||||
|
||||
return 0;
|
||||
}
|
||||
__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
|
||||
|
||||
static void __init set_hw_addr(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
const u8 *addr;
|
||||
void __iomem *regs;
|
||||
struct clk *pclk;
|
||||
|
||||
if (!res)
|
||||
return;
|
||||
if (pdev->id >= ARRAY_SIZE(hw_addr))
|
||||
return;
|
||||
|
||||
addr = hw_addr[pdev->id].addr;
|
||||
if (!is_valid_ether_addr(addr))
|
||||
return;
|
||||
|
||||
/*
|
||||
* Since this is board-specific code, we'll cheat and use the
|
||||
* physical address directly as we happen to know that it's
|
||||
* the same as the virtual address.
|
||||
*/
|
||||
regs = (void __iomem __force *)res->start;
|
||||
pclk = clk_get(&pdev->dev, "pclk");
|
||||
if (!pclk)
|
||||
return;
|
||||
|
||||
clk_enable(pclk);
|
||||
__raw_writel((addr[3] << 24) | (addr[2] << 16)
|
||||
| (addr[1] << 8) | addr[0], regs + 0x98);
|
||||
__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
|
||||
clk_disable(pclk);
|
||||
clk_put(pclk);
|
||||
}
|
||||
|
||||
void __init setup_board(void)
|
||||
{
|
||||
at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
|
||||
at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */
|
||||
at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */
|
||||
at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
|
||||
}
|
||||
|
||||
static struct i2c_gpio_platform_data i2c_gpio_data = {
|
||||
.sda_pin = GPIO_PIN_PA(6),
|
||||
.scl_pin = GPIO_PIN_PA(7),
|
||||
.sda_is_open_drain = 1,
|
||||
.scl_is_open_drain = 1,
|
||||
.udelay = 2, /* close to 100 kHz */
|
||||
};
|
||||
|
||||
static struct platform_device i2c_gpio_device = {
|
||||
.name = "i2c-gpio",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &i2c_gpio_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata i2c_info[] = {
|
||||
};
|
||||
|
||||
static int __init mimc200_init(void)
|
||||
{
|
||||
/*
|
||||
* MIMC200 uses 16-bit SDRAM interface, so we don't need to
|
||||
* reserve any pins for it.
|
||||
*/
|
||||
|
||||
at32_add_system_devices();
|
||||
|
||||
at32_add_device_usart(0);
|
||||
at32_add_device_usart(1);
|
||||
at32_add_device_usart(2);
|
||||
at32_add_device_usart(3);
|
||||
|
||||
set_hw_addr(at32_add_device_eth(0, ð_data[0]));
|
||||
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
|
||||
|
||||
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
|
||||
at32_add_device_mci(0, &mci0_data);
|
||||
at32_add_device_usba(0, NULL);
|
||||
|
||||
at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
|
||||
at32_select_gpio(i2c_gpio_data.sda_pin,
|
||||
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
|
||||
at32_select_gpio(i2c_gpio_data.scl_pin,
|
||||
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
|
||||
platform_device_register(&i2c_gpio_device);
|
||||
i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
|
||||
|
||||
at32_add_device_lcdc(0, &mimc200_lcdc_data,
|
||||
fbmem_start, fbmem_size, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
postcore_initcall(mimc200_init);
|
||||
Loading…
Reference in New Issue