From b7017450978ef38bf14415b457bc57d50de150df Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 May 2018 12:00:11 -0300 Subject: [PATCH 01/26] docs: can.rst: fix a footnote reference As stated at: http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#footnotes A footnote should contain either a number, a reference or an auto number, e. g.: [1], [#f1] or [#]. While using [*] accidentaly works for html, it fails for other document outputs. In particular, it causes an error with LaTeX output, causing all books after networking to not be built. So, replace it by a valid syntax. Acked-by: Oliver Hartkopp Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/networking/can.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst index d23c51abf8c6..2fd0b51a8c52 100644 --- a/Documentation/networking/can.rst +++ b/Documentation/networking/can.rst @@ -164,7 +164,7 @@ The Linux network devices (by default) just can handle the transmission and reception of media dependent frames. Due to the arbitration on the CAN bus the transmission of a low prio CAN-ID may be delayed by the reception of a high prio CAN frame. To -reflect the correct [*]_ traffic on the node the loopback of the sent +reflect the correct [#f1]_ traffic on the node the loopback of the sent data has to be performed right after a successful transmission. If the CAN network interface is not capable of performing the loopback for some reason the SocketCAN core can do this task as a fallback solution. @@ -175,7 +175,7 @@ networking behaviour for CAN applications. Due to some requests from the RT-SocketCAN group the loopback optionally may be disabled for each separate socket. See sockopts from the CAN RAW sockets in :ref:`socketcan-raw-sockets`. -.. [*] you really like to have this when you're running analyser +.. [#f1] you really like to have this when you're running analyser tools like 'candump' or 'cansniffer' on the (same) node. From 2fab30199ad5944ec18a6688a72cc45ec25ebd3a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 May 2018 14:30:09 -0300 Subject: [PATCH 02/26] docs: crypto_engine.rst: Fix two parse warnings ./Documentation/crypto/crypto_engine.rst:13: WARNING: Unexpected indentation. ./Documentation/crypto/crypto_engine.rst:15: WARNING: Block quote ends without a blank line; unexpected unindent. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/crypto/crypto_engine.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/crypto/crypto_engine.rst b/Documentation/crypto/crypto_engine.rst index 8272ac92a14f..1d56221dfe35 100644 --- a/Documentation/crypto/crypto_engine.rst +++ b/Documentation/crypto/crypto_engine.rst @@ -8,11 +8,13 @@ The crypto engine API (CE), is a crypto queue manager. Requirement ----------- -You have to put at start of your tfm_ctx the struct crypto_engine_ctx -struct your_tfm_ctx { +You have to put at start of your tfm_ctx the struct crypto_engine_ctx:: + + struct your_tfm_ctx { struct crypto_engine_ctx enginectx; ... -}; + }; + Why: Since CE manage only crypto_async_request, it cannot know the underlying request_type and so have access only on the TFM. So using container_of for accessing __ctx is impossible. From ecf38679349f8f8ad4d67c69246e7f6c33460c95 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 23:44:08 -0300 Subject: [PATCH 03/26] arch/*: Kconfig: fix documentation for NMI watchdog Changeset 9919cba7ff71 ("watchdog: Update documentation") updated the documentation, removing the old nmi_watchdog.txt and adding a file with a new content. Update Kconfig files accordingly. Fixes: 9919cba7ff71 ("watchdog: Update documentation") Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- arch/arm/Kconfig | 2 +- arch/parisc/Kconfig | 2 +- arch/sh/Kconfig | 2 +- arch/sparc/Kconfig | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 483d2858e367..54eeb8d00bc6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1302,7 +1302,7 @@ config SMP will run faster if you say N here. See also , - and the SMP-HOWTO available at + and the SMP-HOWTO available at . If you don't know what to do here, say N. diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 4d8f64d48597..c480770fabcd 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -275,7 +275,7 @@ config SMP machines, but will use only one CPU of a multiprocessor machine. On a uniprocessor machine, the kernel will run faster if you say N. - See also and the SMP-HOWTO + See also and the SMP-HOWTO available at . If you don't know what to do here, say N. diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 4bedd1c97f29..dd4f3d3e644f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -687,7 +687,7 @@ config SMP People using multiprocessor machines who say Y here should also say Y to "Enhanced Real Time Clock Support", below. - See also and the SMP-HOWTO + See also and the SMP-HOWTO available at . If you don't know what to do here, say N. diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 9a2b8877f174..0f535debf802 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -178,7 +178,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also and the SMP-HOWTO + See also and the SMP-HOWTO available at . If you don't know what to do here, say N. From ec15872daa0ac3f5cbe7cb6f1734c493d74301ac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 18:54:36 -0300 Subject: [PATCH 04/26] docs: fix broken references with multiple hints The script: ./scripts/documentation-file-ref-check --fix Gives multiple hints for broken references on some files. Manually use the one that applies for some files. Acked-by: Steven Rostedt (VMware) Acked-by: James Morris Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/ABI/obsolete/sysfs-gpio | 2 +- .../devicetree/bindings/display/bridge/tda998x.txt | 2 +- Documentation/trace/events.rst | 2 +- Documentation/trace/tracepoint-analysis.rst | 2 +- Documentation/translations/zh_CN/SubmittingDrivers | 2 +- Documentation/translations/zh_CN/gpio.txt | 4 ++-- MAINTAINERS | 2 +- drivers/hid/usbhid/Kconfig | 2 +- drivers/input/Kconfig | 4 ++-- drivers/input/joystick/Kconfig | 4 ++-- drivers/input/joystick/iforce/Kconfig | 4 ++-- drivers/input/serio/Kconfig | 4 ++-- drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt | 2 +- drivers/video/fbdev/skeletonfb.c | 8 ++++---- include/linux/tracepoint.h | 2 +- security/device_cgroup.c | 2 +- 16 files changed, 24 insertions(+), 24 deletions(-) diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index 32513dc2eec9..40d41ea1a3f5 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -11,7 +11,7 @@ Description: Kernel code may export it for complete or partial access. GPIOs are identified as they are inside the kernel, using integers in - the range 0..INT_MAX. See Documentation/gpio/gpio.txt for more information. + the range 0..INT_MAX. See Documentation/gpio for more information. /sys/class/gpio /export ... asks the kernel to export a GPIO to userspace diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt index 1a4eaca40d94..f5a02f61dd36 100644 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -30,7 +30,7 @@ Optional properties: - nxp,calib-gpios: calibration GPIO, which must correspond with the gpio used for the TDA998x interrupt pin. -[1] Documentation/sound/alsa/soc/DAI.txt +[1] Documentation/sound/soc/dai.rst [2] include/dt-bindings/display/tda998x.h Example: diff --git a/Documentation/trace/events.rst b/Documentation/trace/events.rst index 1afae55dc55c..696dc69b8158 100644 --- a/Documentation/trace/events.rst +++ b/Documentation/trace/events.rst @@ -8,7 +8,7 @@ Event Tracing 1. Introduction =============== -Tracepoints (see Documentation/trace/tracepoints.txt) can be used +Tracepoints (see Documentation/trace/tracepoints.rst) can be used without creating custom kernel modules to register probe functions using the event tracing infrastructure. diff --git a/Documentation/trace/tracepoint-analysis.rst b/Documentation/trace/tracepoint-analysis.rst index a4d3ff2e5efb..bef37abf4ad3 100644 --- a/Documentation/trace/tracepoint-analysis.rst +++ b/Documentation/trace/tracepoint-analysis.rst @@ -6,7 +6,7 @@ Notes on Analysing Behaviour Using Events and Tracepoints 1. Introduction =============== -Tracepoints (see Documentation/trace/tracepoints.txt) can be used without +Tracepoints (see Documentation/trace/tracepoints.rst) can be used without creating custom kernel modules to register probe functions using the event tracing infrastructure. diff --git a/Documentation/translations/zh_CN/SubmittingDrivers b/Documentation/translations/zh_CN/SubmittingDrivers index 929385e4b194..15e73562f710 100644 --- a/Documentation/translations/zh_CN/SubmittingDrivers +++ b/Documentation/translations/zh_CN/SubmittingDrivers @@ -107,7 +107,7 @@ Linux 2.6: 程序测试的指导,请参阅 Documentation/power/drivers-testing.txt。有关驱动程序电 源管理问题相对全面的概述,请参阅 - Documentation/power/admin-guide/devices.rst。 + Documentation/driver-api/pm/devices.rst。 管理: 如果一个驱动程序的作者还在进行有效的维护,那么通常除了那 些明显正确且不需要任何检查的补丁以外,其他所有的补丁都会 diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/gpio.txt index 4f8bf30a41dc..4cb1ba8b8fed 100644 --- a/Documentation/translations/zh_CN/gpio.txt +++ b/Documentation/translations/zh_CN/gpio.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/gpio.txt +Chinese translated version of Documentation/gpio If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -10,7 +10,7 @@ Maintainer: Grant Likely Linus Walleij Chinese maintainer: Fu Wei --------------------------------------------------------------------- -Documentation/gpio.txt 的中文翻译 +Documentation/gpio 的中文翻译 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 diff --git a/MAINTAINERS b/MAINTAINERS index cb468a535f32..653a2c29ca43 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13312,7 +13312,7 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC S: Supported F: Documentation/devicetree/bindings/sound/ -F: Documentation/sound/alsa/soc/ +F: Documentation/sound/soc/ F: sound/soc/ F: include/sound/soc* diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig index 0108c5991a04..e50d8fe4d36c 100644 --- a/drivers/hid/usbhid/Kconfig +++ b/drivers/hid/usbhid/Kconfig @@ -14,7 +14,7 @@ config USB_HID You can't use this driver and the HIDBP (Boot Protocol) keyboard and mouse drivers at the same time. More information is available: - . + . If unsure, say Y. diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index ff8037798779..c5992cd195a1 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -16,7 +16,7 @@ config INPUT Say N here if you have a headless (no monitor, no keyboard) system. - More information is available: + More information is available: If unsure, say Y. @@ -144,7 +144,7 @@ config INPUT_JOYDEV If unsure, say Y. - More information is available: + More information is available: To compile this driver as a module, choose M here: the module will be called joydev. diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 9591fc04a8ab..32ec4cee6716 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -9,7 +9,7 @@ menuconfig INPUT_JOYSTICK and the list of supported devices will be displayed. This option doesn't affect the kernel. - Please read the file which + Please read the file which contains more information. if INPUT_JOYSTICK @@ -25,7 +25,7 @@ config JOYSTICK_ANALOG Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or Saitek Cyborg joysticks. - Please read the file which + Please read the file which contains more information. To compile this driver as a module, choose M here: the diff --git a/drivers/input/joystick/iforce/Kconfig b/drivers/input/joystick/iforce/Kconfig index 8fde22a021b3..ab4dbcbcbf50 100644 --- a/drivers/input/joystick/iforce/Kconfig +++ b/drivers/input/joystick/iforce/Kconfig @@ -27,6 +27,6 @@ config JOYSTICK_IFORCE_232 connected to your serial (COM) port. You will need an additional utility called inputattach, see - - and . + + and . diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index ca4530eb3378..d90d9f1098ff 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -47,7 +47,7 @@ config SERIO_SERPORT Say Y here if you plan to use an input device (mouse, joystick, tablet, 6dof) that communicates over the RS232 serial (COM) port. - More information is available: + More information is available: If unsure, say Y. @@ -78,7 +78,7 @@ config SERIO_PARKBD Say Y here if you built a simple parallel port adapter to attach an additional AT keyboard, XT keyboard or PS/2 mouse. - More information is available: + More information is available: If unsure, say N. diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt index 0ba6771654f7..72ba9da3d179 100644 --- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt +++ b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt @@ -11,7 +11,7 @@ pool management for network interfaces. This document provides an overview the Linux DPIO driver, its subcomponents, and its APIs. -See Documentation/dpaa2/overview.txt for a general overview of DPAA2 +See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2 and the general DPAA2 driver architecture in Linux. Driver Overview diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c index 7f4e908330bf..812a36cb60c3 100644 --- a/drivers/video/fbdev/skeletonfb.c +++ b/drivers/video/fbdev/skeletonfb.c @@ -836,7 +836,7 @@ static void xxxfb_remove(struct pci_dev *dev) * @dev: PCI device * @msg: the suspend event code. * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg) { @@ -851,7 +851,7 @@ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg) * xxxfb_resume - Optional but recommended function. Resume the device. * @dev: PCI device * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_resume(struct pci_dev *dev) { @@ -915,7 +915,7 @@ static void __exit xxxfb_exit(void) * @dev: platform device * @msg: the suspend event code. * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg) { @@ -930,7 +930,7 @@ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg) * xxxfb_resume - Optional but recommended function. Resume the device. * @dev: platform device * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_resume(struct platform_dev *dev) { diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index c94f466d57ef..19a690b559ca 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -4,7 +4,7 @@ /* * Kernel Tracepoint API. * - * See Documentation/trace/tracepoints.txt. + * See Documentation/trace/tracepoints.rst. * * Copyright (C) 2008-2014 Mathieu Desnoyers * diff --git a/security/device_cgroup.c b/security/device_cgroup.c index c65b39bafdfe..cd97929fac66 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent) * This is one of the three key functions for hierarchy implementation. * This function is responsible for re-evaluating all the cgroup's active * exceptions due to a parent's exception change. - * Refer to Documentation/cgroups/devices.txt for more details. + * Refer to Documentation/cgroup-v1/devices.txt for more details. */ static void revalidate_active_exceptions(struct dev_cgroup *devcg) { From 5fb94e9ca333f0fe1d96de06704a79942b3832c3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 15:14:57 -0300 Subject: [PATCH 05/26] docs: Fix some broken references As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai Acked-by: Masami Hiramatsu Acked-by: Stephen Boyd Acked-by: Charles Keepax Acked-by: Mathieu Poirier Reviewed-by: Coly Li Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- .../admin-guide/kernel-parameters.txt | 4 ++-- .../bindings/input/rotary-encoder.txt | 2 +- Documentation/driver-api/gpio/consumer.rst | 2 +- Documentation/kprobes.txt | 4 ++-- Documentation/trace/coresight.txt | 2 +- Documentation/trace/ftrace-uses.rst | 2 +- Documentation/trace/histogram.txt | 2 +- Documentation/trace/intel_th.rst | 2 +- Documentation/trace/tracepoint-analysis.rst | 6 +++--- Documentation/translations/ja_JP/howto.rst | 4 ++-- .../translations/zh_CN/magic-number.txt | 4 ++-- .../zh_CN/video4linux/omap3isp.txt | 4 ++-- MAINTAINERS | 20 +++++++++---------- arch/Kconfig | 2 +- arch/arm/include/asm/cacheflush.h | 2 +- arch/arm64/include/asm/cacheflush.h | 2 +- arch/microblaze/include/asm/cacheflush.h | 2 +- arch/um/Kconfig.um | 2 +- arch/unicore32/include/asm/cacheflush.h | 2 +- arch/x86/entry/vsyscall/vsyscall_64.c | 2 +- arch/xtensa/include/asm/cacheflush.h | 4 ++-- block/Kconfig | 2 +- certs/Kconfig | 2 +- crypto/asymmetric_keys/asymmetric_type.c | 2 +- crypto/asymmetric_keys/signature.c | 2 +- drivers/char/Kconfig | 2 +- drivers/clk/clk.c | 4 ++-- drivers/clk/ingenic/cgu.h | 2 +- drivers/gpu/vga/Kconfig | 2 +- drivers/gpu/vga/vgaarb.c | 2 +- drivers/input/joystick/Kconfig | 10 +++++----- drivers/input/joystick/walkera0701.c | 2 +- drivers/input/misc/Kconfig | 4 ++-- drivers/input/misc/rotary_encoder.c | 2 +- drivers/input/mouse/Kconfig | 6 +++--- drivers/input/mouse/alps.c | 2 +- drivers/input/touchscreen/wm97xx-core.c | 2 +- drivers/lightnvm/pblk-rb.c | 2 +- drivers/md/bcache/Kconfig | 2 +- drivers/md/bcache/btree.c | 2 +- drivers/md/bcache/extents.c | 2 +- drivers/media/dvb-core/dvb_ringbuffer.c | 2 +- drivers/media/pci/meye/Kconfig | 2 +- drivers/media/platform/pxa_camera.c | 4 ++-- .../soc_camera/sh_mobile_ceu_camera.c | 2 +- drivers/media/radio/Kconfig | 2 +- drivers/media/radio/si470x/Kconfig | 2 +- drivers/media/usb/dvb-usb-v2/lmedm04.c | 2 +- drivers/media/usb/zr364xx/Kconfig | 2 +- drivers/parport/Kconfig | 6 +++--- drivers/staging/media/bcm2048/TODO | 2 +- include/keys/asymmetric-subtype.h | 2 +- include/keys/asymmetric-type.h | 2 +- include/linux/assoc_array.h | 2 +- include/linux/assoc_array_priv.h | 2 +- include/linux/circ_buf.h | 2 +- include/linux/ftrace.h | 2 +- include/linux/rculist_nulls.h | 2 +- include/uapi/linux/prctl.h | 2 +- include/xen/interface/io/kbdif.h | 2 +- kernel/cgroup/cpuset.c | 2 +- kernel/trace/Kconfig | 16 +++++++-------- lib/Kconfig | 2 +- security/selinux/hooks.c | 2 +- sound/core/Kconfig | 4 ++-- sound/drivers/Kconfig | 4 ++-- sound/pci/Kconfig | 10 +++++----- tools/include/uapi/linux/prctl.h | 2 +- tools/lib/api/fs/fs.c | 2 +- tools/perf/util/bpf-prologue.c | 2 +- .../config/custom-timeline-functions.cfg | 4 ++-- 71 files changed, 113 insertions(+), 113 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 638342d0a095..6fa3f31ed2a5 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4335,7 +4335,7 @@ [FTRACE] Set and start specified trace events in order to facilitate early boot debugging. The event-list is a comma separated list of trace events to enable. See - also Documentation/trace/events.txt + also Documentation/trace/events.rst trace_options=[option-list] [FTRACE] Enable or disable tracer options at boot. @@ -4350,7 +4350,7 @@ trace_options=stacktrace - See also Documentation/trace/ftrace.txt "trace options" + See also Documentation/trace/ftrace.rst "trace options" section. tp_printk[FTRACE] diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt index f99fe5cdeaec..a644408b33b8 100644 --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -28,7 +28,7 @@ Deprecated properties: This property is deprecated. Instead, a 'steps-per-period ' value should be used, such as "rotary-encoder,steps-per-period = <2>". -See Documentation/input/rotary-encoder.txt for more information. +See Documentation/input/devices/rotary-encoder.rst for more information. Example: diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst index c71a50d85b50..aa03f389d41d 100644 --- a/Documentation/driver-api/gpio/consumer.rst +++ b/Documentation/driver-api/gpio/consumer.rst @@ -57,7 +57,7 @@ device that displays digits), an additional index argument can be specified:: enum gpiod_flags flags) For a more detailed description of the con_id parameter in the DeviceTree case -see Documentation/gpio/board.txt +see Documentation/driver-api/gpio/board.rst The flags parameter is used to optionally specify a direction and initial value for the GPIO. Values can be: diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 22208bf2386d..cb3b0de83fc6 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -724,8 +724,8 @@ migrate your tool to one of the following options: See following documents: - - Documentation/trace/kprobetrace.txt - - Documentation/trace/events.txt + - Documentation/trace/kprobetrace.rst + - Documentation/trace/events.rst - tools/perf/Documentation/perf-probe.txt diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt index 1d74ad0202b6..efbc832146e7 100644 --- a/Documentation/trace/coresight.txt +++ b/Documentation/trace/coresight.txt @@ -426,5 +426,5 @@ root@genericarmv8:~# Details on how to use the generic STM API can be found here [2]. [1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm -[2]. Documentation/trace/stm.txt +[2]. Documentation/trace/stm.rst [3]. https://github.com/Linaro/perf-opencsd diff --git a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst index 00283b6dd101..1fbc69894eed 100644 --- a/Documentation/trace/ftrace-uses.rst +++ b/Documentation/trace/ftrace-uses.rst @@ -199,7 +199,7 @@ If @buf is NULL and reset is set, all functions will be enabled for tracing. The @buf can also be a glob expression to enable all functions that match a specific pattern. -See Filter Commands in :file:`Documentation/trace/ftrace.txt`. +See Filter Commands in :file:`Documentation/trace/ftrace.rst`. To just trace the schedule function: diff --git a/Documentation/trace/histogram.txt b/Documentation/trace/histogram.txt index b13771cb12c1..e73bcf9cb5f3 100644 --- a/Documentation/trace/histogram.txt +++ b/Documentation/trace/histogram.txt @@ -7,7 +7,7 @@ Histogram triggers are special event triggers that can be used to aggregate trace event data into histograms. For information on - trace events and event triggers, see Documentation/trace/events.txt. + trace events and event triggers, see Documentation/trace/events.rst. 2. Histogram Trigger Command diff --git a/Documentation/trace/intel_th.rst b/Documentation/trace/intel_th.rst index 990f13265178..19e2d633f3c7 100644 --- a/Documentation/trace/intel_th.rst +++ b/Documentation/trace/intel_th.rst @@ -38,7 +38,7 @@ description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth. STH registers an stm class device, through which it provides interface to userspace and kernelspace software trace sources. See -Documentation/trace/stm.txt for more information on that. +Documentation/trace/stm.rst for more information on that. MSU can be configured to collect trace data into a system memory buffer, which can later on be read from its device nodes via read() or diff --git a/Documentation/trace/tracepoint-analysis.rst b/Documentation/trace/tracepoint-analysis.rst index bef37abf4ad3..716326b9f152 100644 --- a/Documentation/trace/tracepoint-analysis.rst +++ b/Documentation/trace/tracepoint-analysis.rst @@ -55,7 +55,7 @@ simple case of:: 3.1 System-Wide Event Enabling ------------------------------ -See Documentation/trace/events.txt for a proper description on how events +See Documentation/trace/events.rst for a proper description on how events can be enabled system-wide. A short example of enabling all events related to page allocation would look something like:: @@ -112,7 +112,7 @@ at that point. 3.4 Local Event Enabling ------------------------ -Documentation/trace/ftrace.txt describes how to enable events on a per-thread +Documentation/trace/ftrace.rst describes how to enable events on a per-thread basis using set_ftrace_pid. 3.5 Local Event Enablement with PCL @@ -137,7 +137,7 @@ basis using PCL such as follows. 4. Event Filtering ================== -Documentation/trace/ftrace.txt covers in-depth how to filter events in +Documentation/trace/ftrace.rst covers in-depth how to filter events in ftrace. Obviously using grep and awk of trace_pipe is an option as well as any script reading trace_pipe. diff --git a/Documentation/translations/ja_JP/howto.rst b/Documentation/translations/ja_JP/howto.rst index 8d7ed0cbbf5f..f3116381c26b 100644 --- a/Documentation/translations/ja_JP/howto.rst +++ b/Documentation/translations/ja_JP/howto.rst @@ -1,5 +1,5 @@ NOTE: -This is a version of Documentation/HOWTO translated into Japanese. +This is a version of Documentation/process/howto.rst translated into Japanese. This document is maintained by Tsugikazu Shibata If you find any difference between this document and the original file or a problem with the translation, please contact the maintainer of this file. @@ -109,7 +109,7 @@ linux-api@vger.kernel.org に送ることを勧めます。 ています。 カーネルに関して初めての人はここからスタートすると良い でしょう。 - :ref:`Documentation/Process/changes.rst ` + :ref:`Documentation/process/changes.rst ` このファイルはカーネルをうまく生成(訳注 build )し、走らせるのに最 小限のレベルで必要な数々のソフトウェアパッケージの一覧を示してい ます。 diff --git a/Documentation/translations/zh_CN/magic-number.txt b/Documentation/translations/zh_CN/magic-number.txt index e9db693c0a23..7159cec04090 100644 --- a/Documentation/translations/zh_CN/magic-number.txt +++ b/Documentation/translations/zh_CN/magic-number.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/magic-number.txt +Chinese translated version of Documentation/process/magic-number.rst If you have any comment or update to the content, please post to LKML directly. However, if you have problem communicating in English you can also ask the @@ -7,7 +7,7 @@ translation is outdated or there is problem with translation. Chinese maintainer: Jia Wei Wei --------------------------------------------------------------------- -Documentation/magic-number.txt的中文翻译 +Documentation/process/magic-number.rst的中文翻译 如果想评论或更新本文的内容,请直接发信到LKML。如果你使用英文交流有困难的话,也可 以向中文版维护者求助。如果本翻译更新不及时或者翻译存在问题,请联系中文版维护者。 diff --git a/Documentation/translations/zh_CN/video4linux/omap3isp.txt b/Documentation/translations/zh_CN/video4linux/omap3isp.txt index 67ffbf352ae0..e9f29375aa95 100644 --- a/Documentation/translations/zh_CN/video4linux/omap3isp.txt +++ b/Documentation/translations/zh_CN/video4linux/omap3isp.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/video4linux/omap3isp.txt +Chinese translated version of Documentation/media/v4l-drivers/omap3isp.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -11,7 +11,7 @@ Maintainer: Laurent Pinchart David Cohen Chinese maintainer: Fu Wei --------------------------------------------------------------------- -Documentation/video4linux/omap3isp.txt 的中文翻译 +Documentation/media/v4l-drivers/omap3isp.rst 的中文翻译 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 diff --git a/MAINTAINERS b/MAINTAINERS index 653a2c29ca43..09554034be46 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3079,7 +3079,7 @@ M: Clemens Ladisch L: alsa-devel@alsa-project.org (moderated for non-subscribers) T: git git://git.alsa-project.org/alsa-kernel.git S: Maintained -F: Documentation/sound/alsa/Bt87x.txt +F: Documentation/sound/cards/bt87x.rst F: sound/pci/bt87x.c BT8XXGPIO DRIVER @@ -3375,7 +3375,7 @@ M: David Howells M: David Woodhouse L: keyrings@vger.kernel.org S: Maintained -F: Documentation/module-signing.txt +F: Documentation/admin-guide/module-signing.rst F: certs/ F: scripts/sign-file.c F: scripts/extract-cert.c @@ -6501,7 +6501,7 @@ L: linux-mm@kvack.org S: Maintained F: mm/hmm* F: include/linux/hmm* -F: Documentation/vm/hmm.txt +F: Documentation/vm/hmm.rst HOST AP DRIVER M: Jouni Malinen @@ -7401,7 +7401,7 @@ F: drivers/platform/x86/intel-wmi-thunderbolt.c INTEL(R) TRACE HUB M: Alexander Shishkin S: Supported -F: Documentation/trace/intel_th.txt +F: Documentation/trace/intel_th.rst F: drivers/hwtracing/intel_th/ INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT) @@ -9665,7 +9665,7 @@ F: include/uapi/linux/mmc/ MULTIPLEXER SUBSYSTEM M: Peter Rosin S: Maintained -F: Documentation/ABI/testing/mux/sysfs-class-mux* +F: Documentation/ABI/testing/sysfs-class-mux* F: Documentation/devicetree/bindings/mux/ F: include/linux/dt-bindings/mux/ F: include/linux/mux/ @@ -10244,7 +10244,7 @@ F: arch/powerpc/include/asm/pnv-ocxl.h F: drivers/misc/ocxl/ F: include/misc/ocxl* F: include/uapi/misc/ocxl.h -F: Documentation/accelerators/ocxl.txt +F: Documentation/accelerators/ocxl.rst OMAP AUDIO SUPPORT M: Peter Ujfalusi @@ -13794,7 +13794,7 @@ SYSTEM TRACE MODULE CLASS M: Alexander Shishkin S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git -F: Documentation/trace/stm.txt +F: Documentation/trace/stm.rst F: drivers/hwtracing/stm/ F: include/linux/stm.h F: include/uapi/linux/stm.h @@ -14471,7 +14471,7 @@ M: Steven Rostedt M: Ingo Molnar T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core S: Maintained -F: Documentation/trace/ftrace.txt +F: Documentation/trace/ftrace.rst F: arch/*/*/*/ftrace.h F: arch/*/kernel/ftrace.c F: include/*/ftrace.h @@ -14940,7 +14940,7 @@ M: Heikki Krogerus L: linux-usb@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-class-typec -F: Documentation/usb/typec.rst +F: Documentation/driver-api/usb/typec.rst F: drivers/usb/typec/ F: include/linux/usb/typec.h @@ -15770,7 +15770,7 @@ YEALINK PHONE DRIVER M: Henk Vergonet L: usbb2k-api-dev@nongnu.org S: Maintained -F: Documentation/input/yealink.rst +F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* Z8530 DRIVER FOR AX.25 diff --git a/arch/Kconfig b/arch/Kconfig index 47b235d43909..1aa59063f1fd 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -403,7 +403,7 @@ config SECCOMP_FILTER in terms of Berkeley Packet Filter programs which implement task-defined system call filtering polices. - See Documentation/prctl/seccomp_filter.txt for details. + See Documentation/userspace-api/seccomp_filter.rst for details. preferred-plugin-hostcc := $(if-success,[ $(gcc-version) -ge 40800 ],$(HOSTCXX),$(HOSTCC)) diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 869080bedb89..ec1a5fd0d294 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -35,7 +35,7 @@ * Start addresses are inclusive and end addresses are exclusive; * start addresses should be rounded down, end addresses up. * - * See Documentation/cachetlb.txt for more information. + * See Documentation/core-api/cachetlb.rst for more information. * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index 0094c6653b06..d264a7274811 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -36,7 +36,7 @@ * Start addresses are inclusive and end addresses are exclusive; start * addresses should be rounded down, end addresses up. * - * See Documentation/cachetlb.txt for more information. Please note that + * See Documentation/core-api/cachetlb.rst for more information. Please note that * the implementation assumes non-aliasing VIPT D-cache and (aliasing) * VIPT I-cache. * diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index ffea82a16d2c..b091de77b15b 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -19,7 +19,7 @@ #include #include -/* Look at Documentation/cachetlb.txt */ +/* Look at Documentation/core-api/cachetlb.rst */ /* * Cache handling functions. diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um index 3e7f228b22e1..20da5a8ca949 100644 --- a/arch/um/Kconfig.um +++ b/arch/um/Kconfig.um @@ -80,7 +80,7 @@ config MAGIC_SYSRQ On UML, this is accomplished by sending a "sysrq" command with mconsole, followed by the letter for the requested command. - The keys are documented in . Don't say Y + The keys are documented in . Don't say Y unless you really know what this hack does. config KERNEL_STACK_ORDER diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h index 1d9132b66039..1c8b9f13a9e1 100644 --- a/arch/unicore32/include/asm/cacheflush.h +++ b/arch/unicore32/include/asm/cacheflush.h @@ -33,7 +33,7 @@ * Start addresses are inclusive and end addresses are exclusive; * start addresses should be rounded down, end addresses up. * - * See Documentation/cachetlb.txt for more information. + * See Documentation/core-api/cachetlb.rst for more information. * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c index 7782cdbcd67d..82ed001e8909 100644 --- a/arch/x86/entry/vsyscall/vsyscall_64.c +++ b/arch/x86/entry/vsyscall/vsyscall_64.c @@ -201,7 +201,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) /* * Handle seccomp. regs->ip must be the original value. - * See seccomp_send_sigsys and Documentation/prctl/seccomp_filter.txt. + * See seccomp_send_sigsys and Documentation/userspace-api/seccomp_filter.rst. * * We could optimize the seccomp disabled case, but performance * here doesn't matter. diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 397d6a1a4224..a0d50be5a8cb 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -88,7 +88,7 @@ static inline void __invalidate_icache_page_alias(unsigned long virt, * * Pages can get remapped. Because this might change the 'color' of that page, * we have to flush the cache before the PTE is changed. - * (see also Documentation/cachetlb.txt) + * (see also Documentation/core-api/cachetlb.rst) */ #if defined(CONFIG_MMU) && \ @@ -152,7 +152,7 @@ void local_flush_cache_page(struct vm_area_struct *vma, __invalidate_icache_range(start,(end) - (start)); \ } while (0) -/* This is not required, see Documentation/cachetlb.txt */ +/* This is not required, see Documentation/core-api/cachetlb.rst */ #define flush_icache_page(vma,page) do { } while (0) #define flush_dcache_mmap_lock(mapping) do { } while (0) diff --git a/block/Kconfig b/block/Kconfig index 28ec55752b68..eb50fd4977c2 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -114,7 +114,7 @@ config BLK_DEV_THROTTLING one needs to mount and use blkio cgroup controller for creating cgroups and specifying per device IO rate policies. - See Documentation/cgroups/blkio-controller.txt for more information. + See Documentation/cgroup-v1/blkio-controller.txt for more information. config BLK_DEV_THROTTLING_LOW bool "Block throttling .low limit interface support (EXPERIMENTAL)" diff --git a/certs/Kconfig b/certs/Kconfig index 5f7663df6e8e..c94e93d8bccf 100644 --- a/certs/Kconfig +++ b/certs/Kconfig @@ -13,7 +13,7 @@ config MODULE_SIG_KEY If this option is unchanged from its default "certs/signing_key.pem", then the kernel will automatically generate the private key and - certificate as described in Documentation/module-signing.txt + certificate as described in Documentation/admin-guide/module-signing.rst config SYSTEM_TRUSTED_KEYRING bool "Provide system-wide ring of trusted keys" diff --git a/crypto/asymmetric_keys/asymmetric_type.c b/crypto/asymmetric_keys/asymmetric_type.c index 39aecad286fe..26539e9a8bda 100644 --- a/crypto/asymmetric_keys/asymmetric_type.c +++ b/crypto/asymmetric_keys/asymmetric_type.c @@ -1,6 +1,6 @@ /* Asymmetric public-key cryptography key type * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/crypto/asymmetric_keys/signature.c b/crypto/asymmetric_keys/signature.c index 11b7ba170904..28198314bc39 100644 --- a/crypto/asymmetric_keys/signature.c +++ b/crypto/asymmetric_keys/signature.c @@ -1,6 +1,6 @@ /* Signature verification with an asymmetric key * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 410c30c42120..212f447938ae 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -81,7 +81,7 @@ config PRINTER corresponding drivers into the kernel. To compile this driver as a module, choose M here and read - . The module will be called lp. + . The module will be called lp. If you have several parallel ports, you can specify which ports to use with the "lp" kernel command line option. (Try "man bootparam" diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index a24a6afb50b6..9760b526ca31 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -6,7 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Standard functionality for the common clock API. See Documentation/clk.txt + * Standard functionality for the common clock API. See Documentation/driver-api/clk.rst */ #include @@ -2747,7 +2747,7 @@ static int __clk_core_init(struct clk_core *core) goto out; } - /* check that clk_ops are sane. See Documentation/clk.txt */ + /* check that clk_ops are sane. See Documentation/driver-api/clk.rst */ if (core->ops->set_rate && !((core->ops->round_rate || core->ops->determine_rate) && core->ops->recalc_rate)) { diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h index 542192376ebf..502bcbb61b04 100644 --- a/drivers/clk/ingenic/cgu.h +++ b/drivers/clk/ingenic/cgu.h @@ -194,7 +194,7 @@ struct ingenic_cgu { /** * struct ingenic_clk - private data for a clock - * @hw: see Documentation/clk.txt + * @hw: see Documentation/driver-api/clk.rst * @cgu: a pointer to the CGU data * @idx: the index of this clock in cgu->clock_info */ diff --git a/drivers/gpu/vga/Kconfig b/drivers/gpu/vga/Kconfig index 29437eabe095..b677e5d524e6 100644 --- a/drivers/gpu/vga/Kconfig +++ b/drivers/gpu/vga/Kconfig @@ -6,7 +6,7 @@ config VGA_ARB Some "legacy" VGA devices implemented on PCI typically have the same hard-decoded addresses as they did on ISA. When multiple PCI devices are accessed at same time they need some kind of coordination. Please - see Documentation/vgaarbiter.txt for more details. Select this to + see Documentation/gpu/vgaarbiter.rst for more details. Select this to enable VGA arbiter. config VGA_ARB_MAX_GPUS diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index 1c5e74cb9279..c61b04555779 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -1,6 +1,6 @@ /* * vgaarb.c: Implements the VGA arbitration. For details refer to - * Documentation/vgaarbiter.txt + * Documentation/gpu/vgaarbiter.rst * * * (C) Copyright 2005 Benjamin Herrenschmidt diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 32ec4cee6716..d8f9c6e1fc08 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -214,7 +214,7 @@ config JOYSTICK_DB9 gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. For more information on how to use the driver please read - . + . To compile this driver as a module, choose M here: the module will be called db9. @@ -229,7 +229,7 @@ config JOYSTICK_GAMECON Sony PlayStation gamepad or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. For more information on how to use the driver please read - . + . To compile this driver as a module, choose M here: the module will be called gamecon. @@ -241,7 +241,7 @@ config JOYSTICK_TURBOGRAFX Say Y here if you have the TurboGraFX interface by Steffen Schwenke, and want to use it with Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick. For more information on how to use the driver - please read . + please read . To compile this driver as a module, choose M here: the module will be called turbografx. @@ -287,7 +287,7 @@ config JOYSTICK_XPAD and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. For information about how to connect the X-Box pad to USB, see - . + . To compile this driver as a module, choose M here: the module will be called xpad. @@ -313,7 +313,7 @@ config JOYSTICK_WALKERA0701 Say Y or M here if you have a Walkera WK-0701 transmitter which is supplied with a ready to fly Walkera helicopters such as HM36, HM37, HM60 and want to use it via parport as a joystick. More - information is available: + information is available: To compile this driver as a module, choose M here: the module will be called walkera0701. diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c index 36a5b93156ed..dce313dc260a 100644 --- a/drivers/input/joystick/walkera0701.c +++ b/drivers/input/joystick/walkera0701.c @@ -3,7 +3,7 @@ * * Copyright (c) 2008 Peter Popovec * - * More about driver: + * More about driver: */ /* diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 572b15fa18c2..c25606e00693 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -411,7 +411,7 @@ config INPUT_YEALINK usb sound driver, so you might want to enable that as well. For information about how to use these additional functions, see - . + . To compile this driver as a module, choose M here: the module will be called yealink. @@ -595,7 +595,7 @@ config INPUT_GPIO_ROTARY_ENCODER depends on GPIOLIB || COMPILE_TEST help Say Y here to add support for rotary encoders connected to GPIO lines. - Check file:Documentation/input/rotary-encoder.txt for more + Check file:Documentation/input/devices/rotary-encoder.rst for more information. To compile this driver as a module, choose M here: the diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 6d304381fc30..30ec77ad32c6 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -7,7 +7,7 @@ * state machine code inspired by code from Tim Ruetz * * A generic driver for rotary encoders connected to GPIO lines. - * See file:Documentation/input/rotary-encoder.txt for more information + * See file:Documentation/input/devices/rotary-encoder.rst for more information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index f27f23f2d99a..566a1e3aa504 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -129,7 +129,7 @@ config MOUSE_PS2_ELANTECH This driver exposes some configuration registers via sysfs entries. For further information, - see . + see . If unsure, say N. @@ -228,7 +228,7 @@ config MOUSE_APPLETOUCH scrolling in X11. For further information, see - . + . To compile this driver as a module, choose M here: the module will be called appletouch. @@ -251,7 +251,7 @@ config MOUSE_BCM5974 The interface is currently identical to the appletouch interface, for further information, see - . + . To compile this driver as a module, choose M here: the module will be called bcm5974. diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cb5579716dba..0a6f7ca883e7 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -212,7 +212,7 @@ static void alps_set_abs_params_v7(struct alps_data *priv, static void alps_set_abs_params_ss4_v2(struct alps_data *priv, struct input_dev *dev1); -/* Packet formats are described in Documentation/input/alps.txt */ +/* Packet formats are described in Documentation/input/devices/alps.rst */ static bool alps_is_valid_first_byte(struct alps_data *priv, unsigned char data) diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index fd714ee881f7..2566b4d8b342 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -68,7 +68,7 @@ * The default values correspond to Mainstone II in QVGA mode * * Please read - * Documentation/input/input-programming.txt for more details. + * Documentation/input/input-programming.rst for more details. */ static int abs_x[3] = {150, 4000, 5}; diff --git a/drivers/lightnvm/pblk-rb.c b/drivers/lightnvm/pblk-rb.c index 00cd1f20a196..55e9442a99e2 100644 --- a/drivers/lightnvm/pblk-rb.c +++ b/drivers/lightnvm/pblk-rb.c @@ -38,7 +38,7 @@ void pblk_rb_data_free(struct pblk_rb *rb) /* * Initialize ring buffer. The data and metadata buffers must be previously * allocated and their size must be a power of two - * (Documentation/circular-buffers.txt) + * (Documentation/core-api/circular-buffers.rst) */ int pblk_rb_init(struct pblk_rb *rb, struct pblk_rb_entry *rb_entry_base, unsigned int power_size, unsigned int power_seg_sz) diff --git a/drivers/md/bcache/Kconfig b/drivers/md/bcache/Kconfig index 4d200883c505..17bf109c58e9 100644 --- a/drivers/md/bcache/Kconfig +++ b/drivers/md/bcache/Kconfig @@ -5,7 +5,7 @@ config BCACHE Allows a block device to be used as cache for other devices; uses a btree for indexing and the layout is optimized for SSDs. - See Documentation/bcache.txt for details. + See Documentation/admin-guide/bcache.rst for details. config BCACHE_DEBUG bool "Bcache debugging" diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index 2a0968c04e21..547c9eedc2f4 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -18,7 +18,7 @@ * as keys are inserted we only sort the pages that have not yet been written. * When garbage collection is run, we resort the entire node. * - * All configuration is done via sysfs; see Documentation/bcache.txt. + * All configuration is done via sysfs; see Documentation/admin-guide/bcache.rst. */ #include "bcache.h" diff --git a/drivers/md/bcache/extents.c b/drivers/md/bcache/extents.c index c334e6666461..1d096742eb41 100644 --- a/drivers/md/bcache/extents.c +++ b/drivers/md/bcache/extents.c @@ -18,7 +18,7 @@ * as keys are inserted we only sort the pages that have not yet been written. * When garbage collection is run, we resort the entire node. * - * All configuration is done via sysfs; see Documentation/bcache.txt. + * All configuration is done via sysfs; see Documentation/admin-guide/bcache.rst. */ #include "bcache.h" diff --git a/drivers/media/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb-core/dvb_ringbuffer.c index 4330b6fa4af2..d1d471af0636 100644 --- a/drivers/media/dvb-core/dvb_ringbuffer.c +++ b/drivers/media/dvb-core/dvb_ringbuffer.c @@ -55,7 +55,7 @@ int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf) * this pairs with smp_store_release() in dvb_ringbuffer_write(), * dvb_ringbuffer_write_user(), or dvb_ringbuffer_reset() * - * for memory barriers also see Documentation/circular-buffers.txt + * for memory barriers also see Documentation/core-api/circular-buffers.rst */ return (rbuf->pread == smp_load_acquire(&rbuf->pwrite)); } diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig index 2e60334ffef5..9a50f54231ad 100644 --- a/drivers/media/pci/meye/Kconfig +++ b/drivers/media/pci/meye/Kconfig @@ -5,7 +5,7 @@ config VIDEO_MEYE ---help--- This is the video4linux driver for the Motion Eye camera found in the Vaio Picturebook laptops. Please read the material in - for more information. + for more information. If you say Y or M here, you need to say Y or M to "Sony Laptop Extras" in the misc device section. diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c index 4d5a26b4cdda..d85ffbfb7c1f 100644 --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -1021,7 +1021,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev, * - a videobuffer is queued on the pcdev->capture list * * Please check the "DMA hot chaining timeslice issue" in - * Documentation/video4linux/pxa_camera.txt + * Documentation/media/v4l-drivers/pxa_camera.rst * * Context: should only be called within the dma irq handler */ @@ -1443,7 +1443,7 @@ static void pxac_vb2_queue(struct vb2_buffer *vb) /* * Please check the DMA prepared buffer structure in : - * Documentation/video4linux/pxa_camera.txt + * Documentation/media/v4l-drivers/pxa_camera.rst * Please check also in pxa_camera_check_link_miss() to understand why DMA chain * modification while DMA chain is running will work anyway. */ diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index 242342fd7ede..9897213f2618 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1111,7 +1111,7 @@ static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd) /* * CEU can scale and crop, but we don't want to waste bandwidth and kill the * framerate by always requesting the maximum image from the client. See - * Documentation/video4linux/sh_mobile_ceu_camera.txt for a description of + * Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst for a description of * scaling and cropping algorithms and for the meaning of referenced here steps. */ static int sh_mobile_ceu_set_selection(struct soc_camera_device *icd, diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 39b04ad924c0..b426d6f9787d 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -272,7 +272,7 @@ config RADIO_RTRACK been reported to be used by these cards. More information is contained in the file - . + . To compile this driver as a module, choose M here: the module will be called radio-aimslab. diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig index a21172e413a9..6dbb158cd2a0 100644 --- a/drivers/media/radio/si470x/Kconfig +++ b/drivers/media/radio/si470x/Kconfig @@ -29,7 +29,7 @@ config USB_SI470X Please have a look at the documentation, especially on how to redirect the audio stream from the radio to your sound device: - Documentation/video4linux/si470x.txt + Documentation/media/v4l-drivers/si470x.rst Say Y here if you want to connect this type of radio to your computer's USB port. diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c index be26c029546b..39db6dc4b5cd 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -21,7 +21,7 @@ * * LME2510C + M88RS2000 * - * For firmware see Documentation/dvb/lmedm04.txt + * For firmware see Documentation/media/dvb-drivers/lmedm04.rst * * I2C addresses: * 0xd0 - STV0288 - Demodulator diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig index 0f585662881d..ac429bca70e8 100644 --- a/drivers/media/usb/zr364xx/Kconfig +++ b/drivers/media/usb/zr364xx/Kconfig @@ -6,7 +6,7 @@ config USB_ZR364XX ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. - See for more info + See for more info and list of supported cameras. To compile this driver as a module, choose M here: the diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 44333bd8f908..a97f4eada60b 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -20,7 +20,7 @@ menuconfig PARPORT drive, PLIP link (Parallel Line Internet Protocol is mainly used to create a mini network by connecting the parallel ports of two local machines) etc., then you need to say Y here; please read - and + and . For extensive information about drivers for many devices attaching @@ -33,7 +33,7 @@ menuconfig PARPORT the module will be called parport. If you have more than one parallel port and want to specify which port and IRQ to be used by this driver at module load time, take a - look at . + look at . If unsure, say Y. @@ -71,7 +71,7 @@ config PARPORT_PC_FIFO As well as actually having a FIFO, or DMA capability, the kernel will need to know which IRQ the parallel port has. By default, parallel port interrupts will not be used, and so neither will the - FIFO. See to find out how to + FIFO. See to find out how to specify which IRQ/DMA to use. config PARPORT_PC_SUPERIO diff --git a/drivers/staging/media/bcm2048/TODO b/drivers/staging/media/bcm2048/TODO index 051f85dbe89e..6bee2a2dad68 100644 --- a/drivers/staging/media/bcm2048/TODO +++ b/drivers/staging/media/bcm2048/TODO @@ -3,7 +3,7 @@ TODO: From the initial code review: The main thing you need to do is to implement all the controls using the -control framework (see Documentation/video4linux/v4l2-controls.txt). +control framework (see Documentation/media/kapi/v4l2-controls.rst). Most drivers are by now converted to the control framework, so you will find many examples of how to do this in drivers/media/radio. diff --git a/include/keys/asymmetric-subtype.h b/include/keys/asymmetric-subtype.h index 2480469ce8fb..e0a9c2368872 100644 --- a/include/keys/asymmetric-subtype.h +++ b/include/keys/asymmetric-subtype.h @@ -1,6 +1,6 @@ /* Asymmetric public-key cryptography key subtype * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/keys/asymmetric-type.h b/include/keys/asymmetric-type.h index b38240716d41..1cb77cd5135e 100644 --- a/include/keys/asymmetric-type.h +++ b/include/keys/asymmetric-type.h @@ -1,6 +1,6 @@ /* Asymmetric Public-key cryptography key type interface * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/assoc_array.h b/include/linux/assoc_array.h index a89df3be1686..65e3832f96b2 100644 --- a/include/linux/assoc_array.h +++ b/include/linux/assoc_array.h @@ -1,6 +1,6 @@ /* Generic associative array implementation. * - * See Documentation/assoc_array.txt for information. + * See Documentation/core-api/assoc_array.rst for information. * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/assoc_array_priv.h b/include/linux/assoc_array_priv.h index 711275e6681c..a00a06550c10 100644 --- a/include/linux/assoc_array_priv.h +++ b/include/linux/assoc_array_priv.h @@ -1,6 +1,6 @@ /* Private definitions for the generic associative array implementation. * - * See Documentation/assoc_array.txt for information. + * See Documentation/core-api/assoc_array.rst for information. * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/circ_buf.h b/include/linux/circ_buf.h index 7cf262a421c3..b3233e8202f9 100644 --- a/include/linux/circ_buf.h +++ b/include/linux/circ_buf.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * See Documentation/circular-buffers.txt for more information. + * See Documentation/core-api/circular-buffers.rst for more information. */ #ifndef _LINUX_CIRC_BUF_H diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 9c3c9a319e48..8154f4920fcb 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Ftrace header. For implementation details beyond the random comments - * scattered below, see: Documentation/trace/ftrace-design.txt + * scattered below, see: Documentation/trace/ftrace-design.rst */ #ifndef _LINUX_FTRACE_H diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index e4b257ff881b..bc8206a8f30e 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -109,7 +109,7 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * * The barrier() is needed to make sure compiler doesn't cache first element [1], * as this loop can be restarted [2] - * [1] Documentation/atomic_ops.txt around line 114 + * [1] Documentation/core-api/atomic_ops.rst around line 114 * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index db9f15f5db04..c0d7ea0bf5b6 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -170,7 +170,7 @@ struct prctl_mm_map { * asking selinux for a specific new context (e.g. with runcon) will result * in execve returning -EPERM. * - * See Documentation/prctl/no_new_privs.txt for more details. + * See Documentation/userspace-api/no_new_privs.rst for more details. */ #define PR_SET_NO_NEW_PRIVS 38 #define PR_GET_NO_NEW_PRIVS 39 diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h index 2a9510ade701..e2340a4130cf 100644 --- a/include/xen/interface/io/kbdif.h +++ b/include/xen/interface/io/kbdif.h @@ -317,7 +317,7 @@ struct xenkbd_position { * Linux [2] and Windows [3] multi-touch support. * * [1] https://cgit.freedesktop.org/wayland/wayland/tree/protocol/wayland.xml - * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt + * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.rst * [3] https://msdn.microsoft.com/en-us/library/jj151564(v=vs.85).aspx * * diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index d8b12e0d39cd..266f10cb7222 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -605,7 +605,7 @@ static inline int nr_cpusets(void) * load balancing domains (sched domains) as specified by that partial * partition. * - * See "What is sched_load_balance" in Documentation/cgroups/cpusets.txt + * See "What is sched_load_balance" in Documentation/cgroup-v1/cpusets.txt * for a background explanation of this. * * Does not return errors, on the theory that the callers of this diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index dd6c0a2ad969..dcc0166d1997 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -12,22 +12,22 @@ config NOP_TRACER config HAVE_FTRACE_NMI_ENTER bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_FUNCTION_TRACER bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_FUNCTION_GRAPH_TRACER bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_DYNAMIC_FTRACE bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_DYNAMIC_FTRACE_WITH_REGS bool @@ -35,12 +35,12 @@ config HAVE_DYNAMIC_FTRACE_WITH_REGS config HAVE_FTRACE_MCOUNT_RECORD bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_SYSCALL_TRACEPOINTS bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_FENTRY bool @@ -448,7 +448,7 @@ config KPROBE_EVENTS help This allows the user to add tracing events (similar to tracepoints) on the fly via the ftrace interface. See - Documentation/trace/kprobetrace.txt for more details. + Documentation/trace/kprobetrace.rst for more details. Those events can be inserted wherever kprobes can probe, and record various register and memory values. @@ -575,7 +575,7 @@ config MMIOTRACE implementation and works via page faults. Tracing is disabled by default and can be enabled at run-time. - See Documentation/trace/mmiotrace.txt. + See Documentation/trace/mmiotrace.rst. If you are not helping to develop drivers, say N. config TRACING_MAP diff --git a/lib/Kconfig b/lib/Kconfig index 809fdd155739..e34b04b56057 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -405,7 +405,7 @@ config ASSOCIATIVE_ARRAY See: - Documentation/assoc_array.txt + Documentation/core-api/assoc_array.rst for more information. diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 9a46dc24ac10..2b5ee5fbd652 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4728,7 +4728,7 @@ err_af: } /* This supports connect(2) and SCTP connect services such as sctp_connectx(3) - * and sctp_sendmsg(3) as described in Documentation/security/LSM-sctp.txt + * and sctp_sendmsg(3) as described in Documentation/security/LSM-sctp.rst */ static int selinux_socket_connect_helper(struct socket *sock, struct sockaddr *address, int addrlen) diff --git a/sound/core/Kconfig b/sound/core/Kconfig index 6e937a8146a1..63b3ef9c83f5 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -48,7 +48,7 @@ config SND_MIXER_OSS depends on SND_OSSEMUL help To enable OSS mixer API emulation (/dev/mixer*), say Y here - and read . + and read . Many programs still use the OSS API, so say Y. @@ -61,7 +61,7 @@ config SND_PCM_OSS select SND_PCM help To enable OSS digital audio (PCM) emulation (/dev/dsp*), say Y - here and read . + here and read . Many programs still use the OSS API, so say Y. diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 7144cc36e8ae..648a12da44f9 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -153,7 +153,7 @@ config SND_SERIAL_U16550 select SND_RAWMIDI help To include support for MIDI serial port interfaces, say Y here - and read . + and read . This driver works with serial UARTs 16550 and better. This driver accesses the serial port hardware directly, so @@ -223,7 +223,7 @@ config SND_AC97_POWER_SAVE the device frequently. A value of 10 seconds would be a good choice for normal operations. - See Documentation/sound/alsa/powersave.txt for more details. + See Documentation/sound/designs/powersave.rst for more details. config SND_AC97_POWER_SAVE_DEFAULT int "Default time-out for AC97 power-save mode" diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index d9f3fdb777e4..4105d9f653d9 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -175,7 +175,7 @@ config SND_BT87X help If you want to record audio from TV cards based on Brooktree Bt878/Bt879 chips, say Y here and read - . + . To compile this driver as a module, choose M here: the module will be called snd-bt87x. @@ -210,7 +210,7 @@ config SND_CMIPCI help If you want to use soundcards based on C-Media CMI8338, CMI8738, CMI8768 or CMI8770 chips, say Y here and read - . + . To compile this driver as a module, choose M here: the module will be called snd-cmipci. @@ -472,8 +472,8 @@ config SND_EMU10K1 Audigy and E-mu APS (partially supported) soundcards. The confusing multitude of mixer controls is documented in - and - . + and + . To compile this driver as a module, choose M here: the module will be called snd-emu10k1. @@ -735,7 +735,7 @@ config SND_MIXART select SND_PCM help If you want to use Digigram miXart soundcards, say Y here and - read . + read . To compile this driver as a module, choose M here: the module will be called snd-mixart. diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h index db9f15f5db04..c0d7ea0bf5b6 100644 --- a/tools/include/uapi/linux/prctl.h +++ b/tools/include/uapi/linux/prctl.h @@ -170,7 +170,7 @@ struct prctl_mm_map { * asking selinux for a specific new context (e.g. with runcon) will result * in execve returning -EPERM. * - * See Documentation/prctl/no_new_privs.txt for more details. + * See Documentation/userspace-api/no_new_privs.rst for more details. */ #define PR_SET_NO_NEW_PRIVS 38 #define PR_GET_NO_NEW_PRIVS 39 diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c index 6a12bbf39f7b..7aba8243a0e7 100644 --- a/tools/lib/api/fs/fs.c +++ b/tools/lib/api/fs/fs.c @@ -201,7 +201,7 @@ static void mem_toupper(char *f, size_t len) /* * Check for "NAME_PATH" environment variable to override fs location (for - * testing). This matches the recommendation in Documentation/sysfs-rules.txt + * testing). This matches the recommendation in Documentation/admin-guide/sysfs-rules.rst * for SYSFS_PATH. */ static bool fs__env_override(struct fs *fs) diff --git a/tools/perf/util/bpf-prologue.c b/tools/perf/util/bpf-prologue.c index 29347756b0af..77e4891e17b0 100644 --- a/tools/perf/util/bpf-prologue.c +++ b/tools/perf/util/bpf-prologue.c @@ -61,7 +61,7 @@ check_pos(struct bpf_insn_pos *pos) /* * Convert type string (u8/u16/u32/u64/s8/s16/s32/s64 ..., see - * Documentation/trace/kprobetrace.txt) to size field of BPF_LDX_MEM + * Documentation/trace/kprobetrace.rst) to size field of BPF_LDX_MEM * instruction (BPF_{B,H,W,DW}). */ static int diff --git a/tools/power/pm-graph/config/custom-timeline-functions.cfg b/tools/power/pm-graph/config/custom-timeline-functions.cfg index 4f80ad7d7275..f8fcb06fd68b 100644 --- a/tools/power/pm-graph/config/custom-timeline-functions.cfg +++ b/tools/power/pm-graph/config/custom-timeline-functions.cfg @@ -105,7 +105,7 @@ override-dev-timeline-functions: true # example: [color=#CC00CC] # # arglist: A list of arguments from registers/stack addresses. See URL: -# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst # # example: cpu=%di:s32 # @@ -170,7 +170,7 @@ pm_restore_console: # example: [color=#CC00CC] # # arglist: A list of arguments from registers/stack addresses. See URL: -# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst # # example: port=+36(%di):s32 # From fe63a1a6216749fd9d9c5b52d52b75240f9d20f3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 18:10:05 -0300 Subject: [PATCH 06/26] media: dvb: fix location of get_dvb_firmware script This script was moved out of Documentation/dvb, but the links weren't updated. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- drivers/media/dvb-frontends/Kconfig | 18 +++++++++--------- drivers/media/dvb-frontends/nxt200x.c | 4 ++-- drivers/media/dvb-frontends/or51211.c | 2 +- drivers/media/dvb-frontends/sp8870.c | 2 +- drivers/media/dvb-frontends/sp887x.c | 2 +- drivers/media/dvb-frontends/tda1004x.c | 4 ++-- drivers/media/dvb-frontends/tda10071.c | 2 +- drivers/media/pci/cx18/cx18-dvb.c | 2 +- drivers/media/pci/cx23885/cx23885-cards.c | 2 +- drivers/media/pci/ttpci/Kconfig | 2 +- drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 2 +- drivers/media/usb/dvb-usb/dvb-usb-firmware.c | 2 +- drivers/media/usb/dvb-usb/dw2102.c | 4 +--- drivers/media/usb/dvb-usb/gp8psk.c | 2 +- drivers/media/usb/dvb-usb/opera1.c | 2 +- drivers/media/usb/ttusb-dec/Kconfig | 6 +++--- 16 files changed, 28 insertions(+), 30 deletions(-) diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 55e36a4f5215..9ecaa9d0744a 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -324,7 +324,7 @@ config DVB_SP8870 A DVB-T tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the command - "/Documentation/dvb/get_dvb_firmware sp8870" to + "/scripts/get_dvb_firmware sp8870" to download/extract it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -336,7 +336,7 @@ config DVB_SP887X A DVB-T tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the command - "/Documentation/dvb/get_dvb_firmware sp887x" to + "/scripts/get_dvb_firmware sp887x" to download/extract it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -387,8 +387,8 @@ config DVB_TDA1004X A DVB-T tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the commands - "/Documentation/dvb/get_dvb_firmware tda10045", - "/Documentation/dvb/get_dvb_firmware tda10046" to + "/scripts/get_dvb_firmware tda10045", + "/scripts/get_dvb_firmware tda10046" to download/extract them, and then copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -591,8 +591,8 @@ config DVB_NXT200X to support this frontend. This driver needs external firmware. Please use the commands - "/Documentation/dvb/get_dvb_firmware nxt2002" and - "/Documentation/dvb/get_dvb_firmware nxt2004" to + "/scripts/get_dvb_firmware nxt2002" and + "/scripts/get_dvb_firmware nxt2004" to download/extract them, and then copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -604,7 +604,7 @@ config DVB_OR51211 An ATSC 8VSB tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the command - "/Documentation/dvb/get_dvb_firmware or51211" to + "/scripts/get_dvb_firmware or51211" to download it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -617,8 +617,8 @@ config DVB_OR51132 to support this frontend. This driver needs external firmware. Please use the commands - "/Documentation/dvb/get_dvb_firmware or51132_vsb" and/or - "/Documentation/dvb/get_dvb_firmware or51132_qam" to + "/scripts/get_dvb_firmware or51132_vsb" and/or + "/scripts/get_dvb_firmware or51132_qam" to download firmwares for 8VSB and QAM64/256, respectively. Copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c index 7aa74403648e..a6cc4952eb74 100644 --- a/drivers/media/dvb-frontends/nxt200x.c +++ b/drivers/media/dvb-frontends/nxt200x.c @@ -27,8 +27,8 @@ * ATI HDTV Wonder (NXT2004) * * This driver needs external firmware. Please use the command - * "/Documentation/dvb/get_dvb_firmware nxt2002" or - * "/Documentation/dvb/get_dvb_firmware nxt2004" to + * "/scripts/get_dvb_firmware nxt2002" or + * "/scripts/get_dvb_firmware nxt2004" to * download/extract the appropriate firmware, and then copy it to * /usr/lib/hotplug/firmware/ or /lib/firmware/ * (depending on configuration of firmware hotplug). diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index a1b7c301828f..b65ba34fd00a 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -22,7 +22,7 @@ /* * This driver needs external firmware. Please use the command - * "/Documentation/dvb/get_dvb_firmware or51211" to + * "/scripts/get_dvb_firmware or51211" to * download/extract it, and then copy it to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c index 9a726f3a4896..1d57a20093fc 100644 --- a/drivers/media/dvb-frontends/sp8870.c +++ b/drivers/media/dvb-frontends/sp8870.c @@ -21,7 +21,7 @@ */ /* * This driver needs external firmware. Please use the command - * "/Documentation/dvb/get_dvb_firmware alps_tdlb7" to + * "/scripts/get_dvb_firmware alps_tdlb7" to * download/extract it, and then copy it to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c index f39d566d7d1d..57a0d0ae2b48 100644 --- a/drivers/media/dvb-frontends/sp887x.c +++ b/drivers/media/dvb-frontends/sp887x.c @@ -4,7 +4,7 @@ /* * This driver needs external firmware. Please use the command - * "/Documentation/dvb/get_dvb_firmware sp887x" to + * "/scripts/get_dvb_firmware sp887x" to * download/extract it, and then copy it to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/tda1004x.c b/drivers/media/dvb-frontends/tda1004x.c index 58e3beff5adc..7dcfb4a4b2d0 100644 --- a/drivers/media/dvb-frontends/tda1004x.c +++ b/drivers/media/dvb-frontends/tda1004x.c @@ -21,8 +21,8 @@ */ /* * This driver needs external firmware. Please use the commands - * "/Documentation/dvb/get_dvb_firmware tda10045", - * "/Documentation/dvb/get_dvb_firmware tda10046" to + * "/scripts/get_dvb_firmware tda10045", + * "/scripts/get_dvb_firmware tda10046" to * download/extract them, and then copy them to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c index a59f4fd09df6..1ed67c08e699 100644 --- a/drivers/media/dvb-frontends/tda10071.c +++ b/drivers/media/dvb-frontends/tda10071.c @@ -852,7 +852,7 @@ static int tda10071_init(struct dvb_frontend *fe) ret = request_firmware(&fw, fw_file, &client->dev); if (ret) { dev_err(&client->dev, - "did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)\n", + "did not find the firmware file '%s' (status %d). You can use /scripts/get_dvb_firmware to get the firmware\n", fw_file, ret); goto error; } diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c index 010f39eafce1..a3a7f7065349 100644 --- a/drivers/media/pci/cx18/cx18-dvb.c +++ b/drivers/media/pci/cx18/cx18-dvb.c @@ -152,7 +152,7 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, if (ret) { CX18_ERR("The MPC718 board variant with the MT352 DVB-T demodulator will not work without it\n"); - CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware mpc718' if you need the firmware\n"); + CX18_ERR("Run 'linux/scripts/get_dvb_firmware mpc718' if you need the firmware\n"); } return ret; } diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 3a1c55187b2a..9f50748fdf56 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -2426,7 +2426,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ret = request_firmware(&fw, filename, &dev->pci->dev); if (ret != 0) - pr_err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.", + pr_err("did not find the firmware file '%s'. You can use /scripts/get_dvb_firmware to get the firmware.", filename); else altera_init(&netup_config, fw); diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig index 7b83151ed6c4..dfba74dd6521 100644 --- a/drivers/media/pci/ttpci/Kconfig +++ b/drivers/media/pci/ttpci/Kconfig @@ -24,7 +24,7 @@ config DVB_AV7110 onboard MPEG2 decoder. This driver needs an external firmware. Please use the script - "/Documentation/dvb/get_dvb_firmware av7110" to + "/scripts/get_dvb_firmware av7110" to download/extract it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index afdcdbf005e9..955318ab7f5e 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -47,7 +47,7 @@ static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, ret = request_firmware(&fw, name, &d->udev->dev); if (ret < 0) { dev_err(&d->udev->dev, - "%s: Did not find the firmware file '%s'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status %d\n", + "%s: Did not find the firmware file '%s' (status %d). You can use /scripts/get_dvb_firmware to get the firmware\n", KBUILD_MODNAME, name, ret); goto err; } diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c index 15c153e49382..42c207aacbb1 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c @@ -90,7 +90,7 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_pro const struct firmware *fw = NULL; if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) { - err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + err("did not find the firmware file '%s' (status %d). You can use /scripts/get_dvb_firmware to get the firmware", props->firmware,ret); return ret; } diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 346946f35b1a..716711ecce32 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -61,9 +61,7 @@ #define P1100_FIRMWARE "dvb-usb-p1100.fw" #define P7500_FIRMWARE "dvb-usb-p7500.fw" -#define err_str "did not find the firmware file. (%s) " \ - "Please see linux/Documentation/dvb/ for more details " \ - "on firmware-problems." +#define err_str "did not find the firmware file '%s'. You can use /scripts/get_dvb_firmware to get the firmware" struct dw2102_state { u8 initialized; diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 334b9fb98112..1ad8dfb10aa4 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -135,7 +135,7 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) u8 *buf; if ((ret = request_firmware(&fw, bcm4500_firmware, &d->udev->dev)) != 0) { - err("did not find the bcm4500 firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + err("did not find the bcm4500 firmware file '%s' (status %d). You can use /scripts/get_dvb_firmware to get the firmware", bcm4500_firmware,ret); return ret; } diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c index 946a5ccc8f1a..eeafa3cdbbdc 100644 --- a/drivers/media/usb/dvb-usb/opera1.c +++ b/drivers/media/usb/dvb-usb/opera1.c @@ -453,7 +453,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev, info("start downloading fpga firmware %s",filename); if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { - err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.", + err("did not find the firmware file '%s'. You can use /scripts/get_dvb_firmware to get the firmware", filename); return ret; } else { diff --git a/drivers/media/usb/ttusb-dec/Kconfig b/drivers/media/usb/ttusb-dec/Kconfig index 290254ab06db..b205903a3c61 100644 --- a/drivers/media/usb/ttusb-dec/Kconfig +++ b/drivers/media/usb/ttusb-dec/Kconfig @@ -12,9 +12,9 @@ config DVB_TTUSB_DEC an external software decoder to watch TV on your computer. This driver needs external firmware. Please use the commands - "/Documentation/dvb/get_dvb_firmware dec2000t", - "/Documentation/dvb/get_dvb_firmware dec2540t", - "/Documentation/dvb/get_dvb_firmware dec3000s", + "/scripts/get_dvb_firmware dec2000t", + "/scripts/get_dvb_firmware dec2540t", + "/scripts/get_dvb_firmware dec3000s", download/extract them, and then copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). From 670d7adb09078a005ce20b2ca8a429d05d985b5b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 18:29:30 -0300 Subject: [PATCH 07/26] media: dvb: point to the location of the old README.dvb-usb file This file got renamed, but the references still point to the old place. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- drivers/media/dvb-frontends/dib3000.h | 2 +- drivers/media/dvb-frontends/dib3000mb.c | 2 +- drivers/media/dvb-frontends/eds1547.h | 2 +- drivers/media/dvb-frontends/z0194a.h | 2 +- drivers/media/usb/dvb-usb-v2/Kconfig | 2 +- drivers/media/usb/dvb-usb-v2/gl861.c | 2 +- drivers/media/usb/dvb-usb-v2/lmedm04.c | 2 +- drivers/media/usb/dvb-usb-v2/lmedm04.h | 2 +- drivers/media/usb/dvb-usb-v2/mxl111sf.c | 2 +- drivers/media/usb/dvb-usb-v2/mxl111sf.h | 2 +- drivers/media/usb/dvb-usb/Kconfig | 2 +- drivers/media/usb/dvb-usb/a800.c | 2 +- drivers/media/usb/dvb-usb/af9005-fe.c | 2 +- drivers/media/usb/dvb-usb/af9005-remote.c | 2 +- drivers/media/usb/dvb-usb/af9005.c | 2 +- drivers/media/usb/dvb-usb/af9005.h | 2 +- drivers/media/usb/dvb-usb/az6027.c | 2 +- drivers/media/usb/dvb-usb/cxusb.c | 2 +- drivers/media/usb/dvb-usb/dibusb-common.c | 2 +- drivers/media/usb/dvb-usb/dibusb-mb.c | 2 +- drivers/media/usb/dvb-usb/dibusb-mc-common.c | 2 +- drivers/media/usb/dvb-usb/dibusb-mc.c | 2 +- drivers/media/usb/dvb-usb/dibusb.h | 2 +- drivers/media/usb/dvb-usb/digitv.c | 2 +- drivers/media/usb/dvb-usb/dtt200u-fe.c | 2 +- drivers/media/usb/dvb-usb/dtt200u.c | 2 +- drivers/media/usb/dvb-usb/dtt200u.h | 2 +- drivers/media/usb/dvb-usb/dvb-usb-init.c | 2 +- drivers/media/usb/dvb-usb/dw2102.c | 2 +- drivers/media/usb/dvb-usb/friio-fe.c | 2 +- drivers/media/usb/dvb-usb/friio.c | 2 +- drivers/media/usb/dvb-usb/friio.h | 2 +- drivers/media/usb/dvb-usb/gp8psk.c | 2 +- drivers/media/usb/dvb-usb/gp8psk.h | 2 +- drivers/media/usb/dvb-usb/m920x.c | 2 +- drivers/media/usb/dvb-usb/nova-t-usb2.c | 2 +- drivers/media/usb/dvb-usb/opera1.c | 2 +- drivers/media/usb/dvb-usb/ttusb2.c | 2 +- drivers/media/usb/dvb-usb/ttusb2.h | 2 +- drivers/media/usb/dvb-usb/umt-010.c | 2 +- drivers/media/usb/dvb-usb/vp702x-fe.c | 2 +- drivers/media/usb/dvb-usb/vp702x.c | 2 +- drivers/media/usb/dvb-usb/vp7045-fe.c | 2 +- drivers/media/usb/dvb-usb/vp7045.c | 2 +- drivers/media/usb/dvb-usb/vp7045.h | 2 +- 45 files changed, 45 insertions(+), 45 deletions(-) diff --git a/drivers/media/dvb-frontends/dib3000.h b/drivers/media/dvb-frontends/dib3000.h index d5dfafb4ef13..d2b7523a22b5 100644 --- a/drivers/media/dvb-frontends/dib3000.h +++ b/drivers/media/dvb-frontends/dib3000.h @@ -17,7 +17,7 @@ * Amaury Demol from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ diff --git a/drivers/media/dvb-frontends/dib3000mb.c b/drivers/media/dvb-frontends/dib3000mb.c index de3ce2786c72..5861f346db49 100644 --- a/drivers/media/dvb-frontends/dib3000mb.c +++ b/drivers/media/dvb-frontends/dib3000mb.c @@ -17,7 +17,7 @@ * Amaury Demol from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ diff --git a/drivers/media/dvb-frontends/eds1547.h b/drivers/media/dvb-frontends/eds1547.h index c983f2f85802..30f067fc1f56 100644 --- a/drivers/media/dvb-frontends/eds1547.h +++ b/drivers/media/dvb-frontends/eds1547.h @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * -* see Documentation/dvb/README.dvb-usb for more information +* see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef EDS1547 diff --git a/drivers/media/dvb-frontends/z0194a.h b/drivers/media/dvb-frontends/z0194a.h index 96d86d6eb473..0871c1ade94c 100644 --- a/drivers/media/dvb-frontends/z0194a.h +++ b/drivers/media/dvb-frontends/z0194a.h @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * -* see Documentation/dvb/README.dvb-usb for more information +* see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef Z0194A diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig index 37053477b84d..082b8d67244b 100644 --- a/drivers/media/usb/dvb-usb-v2/Kconfig +++ b/drivers/media/usb/dvb-usb-v2/Kconfig @@ -6,7 +6,7 @@ config DVB_USB_V2 USB1.1 and USB2.0 DVB devices. Almost every USB device needs a firmware, please look into - . + . For a complete list of supported USB devices see the LinuxTV DVB Wiki: diff --git a/drivers/media/usb/dvb-usb-v2/gl861.c b/drivers/media/usb/dvb-usb-v2/gl861.c index 4817dfd3e659..9d154fdae45b 100644 --- a/drivers/media/usb/dvb-usb-v2/gl861.c +++ b/drivers/media/usb/dvb-usb-v2/gl861.c @@ -4,7 +4,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "gl861.h" diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c index 39db6dc4b5cd..0750a975bcb8 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -49,7 +49,7 @@ * GNU General Public License for more details. * * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * * Known Issues : * LME2510: Non Intel USB chipsets fail to maintain High Speed on diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.h b/drivers/media/usb/dvb-usb-v2/lmedm04.h index e9c207205c2f..c4ae37c19512 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.h +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.h @@ -16,7 +16,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_LME2510_H_ #define _DVB_USB_LME2510_H_ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 67953360fda5..4713ba65e1c2 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -5,7 +5,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.h b/drivers/media/usb/dvb-usb-v2/mxl111sf.h index 3e6f5880bd1e..22253d4908eb 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.h @@ -5,7 +5,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_MXL111SF_H_ diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig index 2651ae277347..b8a1c62a0682 100644 --- a/drivers/media/usb/dvb-usb/Kconfig +++ b/drivers/media/usb/dvb-usb/Kconfig @@ -6,7 +6,7 @@ config DVB_USB USB1.1 and USB2.0 DVB devices. Almost every USB device needs a firmware, please look into - . + . For a complete list of supported USB devices see the LinuxTV DVB Wiki: diff --git a/drivers/media/usb/dvb-usb/a800.c b/drivers/media/usb/dvb-usb/a800.c index 540886b3bb29..198bd5eadb3f 100644 --- a/drivers/media/usb/dvb-usb/a800.c +++ b/drivers/media/usb/dvb-usb/a800.c @@ -11,7 +11,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/af9005-fe.c b/drivers/media/usb/dvb-usb/af9005-fe.c index 544bdf18fb2f..7fbbc954da16 100644 --- a/drivers/media/usb/dvb-usb/af9005-fe.c +++ b/drivers/media/usb/dvb-usb/af9005-fe.c @@ -15,7 +15,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "af9005.h" #include "af9005-script.h" diff --git a/drivers/media/usb/dvb-usb/af9005-remote.c b/drivers/media/usb/dvb-usb/af9005-remote.c index 9b29ffa93075..f7cdcc8424a8 100644 --- a/drivers/media/usb/dvb-usb/af9005-remote.c +++ b/drivers/media/usb/dvb-usb/af9005-remote.c @@ -17,7 +17,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "af9005.h" /* debug */ diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index 986763b1b2b3..16e946e01d2c 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -15,7 +15,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "af9005.h" diff --git a/drivers/media/usb/dvb-usb/af9005.h b/drivers/media/usb/dvb-usb/af9005.h index a1eae0fa02ed..7ae4dc3a968b 100644 --- a/drivers/media/usb/dvb-usb/af9005.h +++ b/drivers/media/usb/dvb-usb/af9005.h @@ -15,7 +15,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_AF9005_H_ #define _DVB_USB_AF9005_H_ diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c index f0d10ac03a37..6321b8e30261 100644 --- a/drivers/media/usb/dvb-usb/az6027.c +++ b/drivers/media/usb/dvb-usb/az6027.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "az6027.h" diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index b70d289dc738..5b51ed7d6243 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -21,7 +21,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include #include diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c index bcacb0f22028..fb1b4f2d5f9d 100644 --- a/drivers/media/usb/dvb-usb/dibusb-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-common.c @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c index a0057641cc86..408920577716 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mb.c +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c @@ -10,7 +10,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c index 0c2bc97436d5..ec3a20a95b04 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mc-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c index 08fb8a3f6e0c..bce8ffe640ca 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mc.c +++ b/drivers/media/usb/dvb-usb/dibusb-mc.c @@ -10,7 +10,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h index 697be2a17ade..943df579b98b 100644 --- a/drivers/media/usb/dvb-usb/dibusb.h +++ b/drivers/media/usb/dvb-usb/dibusb.h @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_DIBUSB_H_ #define _DVB_USB_DIBUSB_H_ diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 475a3c0cdee7..49b9d63e5885 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "digitv.h" diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index 00f565fe7cc2..7e75aae34fb8 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dtt200u.h" diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index 512370786696..f03d26954517 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dtt200u.h" diff --git a/drivers/media/usb/dvb-usb/dtt200u.h b/drivers/media/usb/dvb-usb/dtt200u.h index efccc399b1cb..ea2a096c1650 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.h +++ b/drivers/media/usb/dvb-usb/dtt200u.h @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_DTT200U_H_ #define _DVB_USB_DTT200U_H_ diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c index 84308569e7dc..40ca4eafb137 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dvb-usb-common.h" diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 716711ecce32..0d4fdd34a710 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -11,7 +11,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include #include "dw2102.h" diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c index b2830c157548..932f262452eb 100644 --- a/drivers/media/usb/dvb-usb/friio-fe.c +++ b/drivers/media/usb/dvb-usb/friio-fe.c @@ -8,7 +8,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include #include diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c index 16875945e662..fe799a7ad44b 100644 --- a/drivers/media/usb/dvb-usb/friio.c +++ b/drivers/media/usb/dvb-usb/friio.c @@ -8,7 +8,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "friio.h" diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h index 0f461ca10cb9..a53af56d035c 100644 --- a/drivers/media/usb/dvb-usb/friio.h +++ b/drivers/media/usb/dvb-usb/friio.h @@ -8,7 +8,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_FRIIO_H_ #define _DVB_USB_FRIIO_H_ diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 1ad8dfb10aa4..13e96b0aeb0f 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -12,7 +12,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "gp8psk.h" #include "gp8psk-fe.h" diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h index d8975b866dee..fd063e385eaf 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.h +++ b/drivers/media/usb/dvb-usb/gp8psk.h @@ -12,7 +12,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_GP8PSK_H_ #define _DVB_USB_GP8PSK_H_ diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c index 32081c2ce0da..51b026fa6bfb 100644 --- a/drivers/media/usb/dvb-usb/m920x.c +++ b/drivers/media/usb/dvb-usb/m920x.c @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "m920x.h" diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c index 1babd3341910..43e0e0fd715b 100644 --- a/drivers/media/usb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c index eeafa3cdbbdc..61a377e2373d 100644 --- a/drivers/media/usb/dvb-usb/opera1.c +++ b/drivers/media/usb/dvb-usb/opera1.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * -* see Documentation/dvb/README.dvb-usb for more information +* see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #define DVB_USB_LOG_PREFIX "opera" diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c index 12de89665d60..b4d681151599 100644 --- a/drivers/media/usb/dvb-usb/ttusb2.c +++ b/drivers/media/usb/dvb-usb/ttusb2.c @@ -20,7 +20,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #define DVB_USB_LOG_PREFIX "ttusb2" #include "dvb-usb.h" diff --git a/drivers/media/usb/dvb-usb/ttusb2.h b/drivers/media/usb/dvb-usb/ttusb2.h index 52a63af40896..8b6525e5fb24 100644 --- a/drivers/media/usb/dvb-usb/ttusb2.h +++ b/drivers/media/usb/dvb-usb/ttusb2.h @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_TTUSB2_H_ #define _DVB_USB_TTUSB2_H_ diff --git a/drivers/media/usb/dvb-usb/umt-010.c b/drivers/media/usb/dvb-usb/umt-010.c index 58ad5b4f856c..920bc67c3bcb 100644 --- a/drivers/media/usb/dvb-usb/umt-010.c +++ b/drivers/media/usb/dvb-usb/umt-010.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/vp702x-fe.c b/drivers/media/usb/dvb-usb/vp702x-fe.c index 7ff31baa3682..ae48146e005c 100644 --- a/drivers/media/usb/dvb-usb/vp702x-fe.c +++ b/drivers/media/usb/dvb-usb/vp702x-fe.c @@ -15,7 +15,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ #include "vp702x.h" diff --git a/drivers/media/usb/dvb-usb/vp702x.c b/drivers/media/usb/dvb-usb/vp702x.c index 40de33de90a7..c3529ea59da9 100644 --- a/drivers/media/usb/dvb-usb/vp702x.c +++ b/drivers/media/usb/dvb-usb/vp702x.c @@ -12,7 +12,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "vp702x.h" #include diff --git a/drivers/media/usb/dvb-usb/vp7045-fe.c b/drivers/media/usb/dvb-usb/vp7045-fe.c index 4520ad9c2014..f86040173b8d 100644 --- a/drivers/media/usb/dvb-usb/vp7045-fe.c +++ b/drivers/media/usb/dvb-usb/vp7045-fe.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ #include "vp7045.h" diff --git a/drivers/media/usb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c index 2527b88beb87..e2c8a8530554 100644 --- a/drivers/media/usb/dvb-usb/vp7045.c +++ b/drivers/media/usb/dvb-usb/vp7045.c @@ -10,7 +10,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "vp7045.h" diff --git a/drivers/media/usb/dvb-usb/vp7045.h b/drivers/media/usb/dvb-usb/vp7045.h index 66499932ca76..2fdafd8f8cd6 100644 --- a/drivers/media/usb/dvb-usb/vp7045.h +++ b/drivers/media/usb/dvb-usb/vp7045.h @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_VP7045_H_ #define _DVB_USB_VP7045_H_ From 2ebe0bb30ff5fcf9534d1af6faa13564d040d14c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 19:41:44 -0300 Subject: [PATCH 08/26] media: v4l: fix broken video4linux docs locations There are several places pointing to old documentation files: Documentation/video4linux/API.html Documentation/video4linux/bttv/ Documentation/video4linux/cx2341x/fw-encoder-api.txt Documentation/video4linux/m5602.txt Documentation/video4linux/v4l2-framework.txt Documentation/video4linux/videobuf Documentation/video4linux/Zoran Make them point to the new location where available, removing otherwise. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- .../translations/zh_CN/video4linux/v4l2-framework.txt | 6 +++--- drivers/media/pci/bt8xx/Kconfig | 2 +- drivers/media/pci/cx18/cx18-streams.c | 4 ++-- drivers/media/radio/Kconfig | 10 +++++----- drivers/media/radio/wl128x/Kconfig | 2 +- drivers/media/usb/gspca/m5602/Kconfig | 2 -- drivers/staging/media/zoran/Kconfig | 2 +- 7 files changed, 13 insertions(+), 15 deletions(-) diff --git a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt index c77c0f060864..66c7c568bd86 100644 --- a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt +++ b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/video4linux/v4l2-framework.txt +Chinese translated version of Documentation/media/media_kapi.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -9,7 +9,7 @@ or if there is a problem with the translation. Maintainer: Mauro Carvalho Chehab Chinese maintainer: Fu Wei --------------------------------------------------------------------- -Documentation/video4linux/v4l2-framework.txt 的中文翻译 +Documentation/media/media_kapi.rst 的中文翻译 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 @@ -777,7 +777,7 @@ v4l2 核心 API 提供了一个处理视频缓冲的标准方法(称为“videob 线性 DMA(videobuf-dma-contig)以及大多用于 USB 设备的用 vmalloc 分配的缓冲(videobuf-vmalloc)。 -请参阅 Documentation/video4linux/videobuf,以获得更多关于 videobuf +请参阅 Documentation/media/kapi/v4l2-videobuf.rst,以获得更多关于 videobuf 层的使用信息。 v4l2_fh 结构体 diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig index 4a93f6ded100..bc89e37608cd 100644 --- a/drivers/media/pci/bt8xx/Kconfig +++ b/drivers/media/pci/bt8xx/Kconfig @@ -16,7 +16,7 @@ config VIDEO_BT848 ---help--- Support for BT848 based frame grabber/overlay boards. This includes the Miro, Hauppauge and STB boards. Please read the material in - for more information. + for more information. To compile this driver as a module, choose M here: the module will be called bttv. diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c index a594cfdeca20..b36f4ce25d22 100644 --- a/drivers/media/pci/cx18/cx18-streams.c +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -853,7 +853,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) /* * Audio related reset according to - * Documentation/video4linux/cx2341x/fw-encoder-api.txt + * Documentation/media/v4l-drivers/cx2341x.rst */ if (atomic_read(&cx->ana_capturing) == 0) cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, @@ -861,7 +861,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) /* * Number of lines for Field 1 & Field 2 according to - * Documentation/video4linux/cx2341x/fw-encoder-api.txt + * Documentation/media/v4l-drivers/cx2341x.rst * Field 1 is 312 for 625 line systems in BT.656 * Field 2 is 313 for 625 line systems in BT.656 */ diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index b426d6f9787d..9b99dfb2d0c6 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -35,7 +35,7 @@ config RADIO_SI476X In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at - . + . To compile this driver as a module, choose M here: the module will be called radio-si476x. @@ -75,7 +75,7 @@ config RADIO_MAXIRADIO In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at - . + . To compile this driver as a module, choose M here: the module will be called radio-maxiradio. @@ -93,7 +93,7 @@ config RADIO_SHARK In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at - . + . To compile this driver as a module, choose M here: the module will be called radio-shark. @@ -110,7 +110,7 @@ config RADIO_SHARK2 In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at - . + . To compile this driver as a module, choose M here: the module will be called radio-shark2. @@ -217,7 +217,7 @@ config RADIO_WL1273 In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at - . + . To compile this driver as a module, choose M here: the module will be called radio-wl1273. diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index 2add222ea346..64b66bbdae72 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -12,6 +12,6 @@ config RADIO_WL128X In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at - . + . endmenu diff --git a/drivers/media/usb/gspca/m5602/Kconfig b/drivers/media/usb/gspca/m5602/Kconfig index 5a69016ed75f..13a00399ced9 100644 --- a/drivers/media/usb/gspca/m5602/Kconfig +++ b/drivers/media/usb/gspca/m5602/Kconfig @@ -5,7 +5,5 @@ config USB_M5602 Say Y here if you want support for cameras based on the ALi m5602 connected to various image sensors. - See for more info. - To compile this driver as a module, choose M here: the module will be called gspca_m5602. diff --git a/drivers/staging/media/zoran/Kconfig b/drivers/staging/media/zoran/Kconfig index 63df5de5068d..34a18135ede0 100644 --- a/drivers/staging/media/zoran/Kconfig +++ b/drivers/staging/media/zoran/Kconfig @@ -7,7 +7,7 @@ config VIDEO_ZORAN 36057/36067 PCI controller chipset. This includes the Iomega Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is a driver homepage at . For - more information, check . + more information, check . To compile this driver as a module, choose M here: the module will be called zr36067. From b69820106608aa214ea596e297a91ec3fca44b6a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 07:34:51 -0300 Subject: [PATCH 09/26] media: max2175: fix location of driver's companion documentation There's a missing ".rst" at the doc's file name. Acked-by: Ramesh Shanmugasundaram Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- drivers/media/i2c/max2175.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/i2c/max2175.c b/drivers/media/i2c/max2175.c index 87cba15b2977..008a082cb8ad 100644 --- a/drivers/media/i2c/max2175.c +++ b/drivers/media/i2c/max2175.c @@ -1202,7 +1202,7 @@ static const struct v4l2_ctrl_ops max2175_ctrl_ops = { /* * I2S output enable/disable configuration. This is a private control. - * Refer to Documentation/media/v4l-drivers/max2175 for more details. + * Refer to Documentation/media/v4l-drivers/max2175.rst for more details. */ static const struct v4l2_ctrl_config max2175_i2s_en = { .ops = &max2175_ctrl_ops, @@ -1218,7 +1218,7 @@ static const struct v4l2_ctrl_config max2175_i2s_en = { /* * HSLS value control LO freq adjacent location configuration. - * Refer to Documentation/media/v4l-drivers/max2175 for more details. + * Refer to Documentation/media/v4l-drivers/max2175.rst for more details. */ static const struct v4l2_ctrl_config max2175_hsls = { .ops = &max2175_ctrl_ops, @@ -1234,7 +1234,7 @@ static const struct v4l2_ctrl_config max2175_hsls = { /* * Rx modes below are a set of preset configurations that decides the tuner's * sck and sample rate of transmission. They are separate for EU & NA regions. - * Refer to Documentation/media/v4l-drivers/max2175 for more details. + * Refer to Documentation/media/v4l-drivers/max2175.rst for more details. */ static const char * const max2175_ctrl_eu_rx_modes[] = { [MAX2175_EU_FM_1_2] = "EU FM 1.2", From 40fc3eb055cb39429dc16a94e825a5598befb9a7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 07:11:02 -0300 Subject: [PATCH 10/26] scripts/documentation-file-ref-check: fix help message The name of the --fix option was renamed, but it was not changed at the quick help message. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- scripts/documentation-file-ref-check | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check index 2520bc14ffac..9e7ae14080aa 100755 --- a/scripts/documentation-file-ref-check +++ b/scripts/documentation-file-ref-check @@ -21,7 +21,7 @@ GetOptions( ); if ($help != 0) { - print "$scriptname [--help] [--fix-rst]\n"; + print "$scriptname [--help] [--fix]\n"; exit -1; } From 50440240021ca3cefe376fa11a7ae085734f165a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 07:48:22 -0300 Subject: [PATCH 11/26] scripts/documentation-file-ref-check: accept more wildcards at filenames at MAINTAINERS, some filename paths use '?' and things like [7,9]. So, accept more wildcards, in order to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- scripts/documentation-file-ref-check | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check index 9e7ae14080aa..9d5e21b10346 100755 --- a/scripts/documentation-file-ref-check +++ b/scripts/documentation-file-ref-check @@ -43,7 +43,7 @@ while () { # Skip this script next if ($f eq $scriptname); - if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*+-]*),) { + if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*\[\]\?+-]*),) { my $prefix = $1; my $ref = $2; my $base = $2; From be600e5ac79fb5f6c8839d6a48d89fc2b917f0c7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 09:36:35 -0300 Subject: [PATCH 12/26] scripts/documentation-file-ref-check: add a fix logic for DT There are several links broken due to DT file movements. Add a hint logic to seek for those changes. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- scripts/documentation-file-ref-check | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check index 9d5e21b10346..c8bc1c1c1d6e 100755 --- a/scripts/documentation-file-ref-check +++ b/scripts/documentation-file-ref-check @@ -64,7 +64,7 @@ while () { next if (grep -e, glob("$ref $fulref")); if ($fix) { - if (!($ref =~ m/(devicetree|scripts|Kconfig|Kbuild)/)) { + if (!($ref =~ m/(scripts|Kconfig|Kbuild)/)) { $broken_ref{$ref}++; } } else { @@ -84,10 +84,19 @@ foreach my $ref (keys %broken_ref) { # get just the basename $new =~ s,.*/,,; - # Seek for the same name on another place, as it may have been moved my $f=""; - $f = qx(find . -iname $new) if ($new); + # usual reason for breakage: DT file moved around + if ($ref =~ /devicetree/) { + my $search = $new; + $search =~ s,^.*/,,; + $f = qx(find Documentation/devicetree/ -iname "*$search*") if ($search); + if (!$f) { + # Manufacturer name may have changed + $search =~ s/^.*,//; + $f = qx(find Documentation/devicetree/ -iname "*$search*") if ($search); + } + } # usual reason for breakage: file renamed to .rst if (!$f) { @@ -95,6 +104,11 @@ foreach my $ref (keys %broken_ref) { $f=qx(find . -iname $new) if ($new); } + # Wild guess: seek for the same name on another place + if (!$f) { + $f = qx(find . -iname $new) if ($new); + } + my @find = split /\s+/, $f; if (!$f) { From e1f319fe4d537da79691f1a1da7a20147de33047 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 10:14:54 -0300 Subject: [PATCH 13/26] scripts/documentation-file-ref-check: hint: dash or underline Sometimes, people use dash instead of underline or vice-versa. Try to autocorrect it. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- scripts/documentation-file-ref-check | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check index c8bc1c1c1d6e..d132f756d31d 100755 --- a/scripts/documentation-file-ref-check +++ b/scripts/documentation-file-ref-check @@ -104,6 +104,12 @@ foreach my $ref (keys %broken_ref) { $f=qx(find . -iname $new) if ($new); } + # usual reason for breakage: use dash or underline + if (!$f) { + $new =~ s/[-_]/[-_]/g; + $f=qx(find . -iname $new) if ($new); + } + # Wild guess: seek for the same name on another place if (!$f) { $f = qx(find . -iname $new) if ($new); From 2d69708f9c08067735672908507894374bebb379 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 10:47:29 -0300 Subject: [PATCH 14/26] scripts/documentation-file-ref-check: get rid of false-positives Now that the number of broken refs are smaller, improve the logic that gets rid of false-positives. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- scripts/documentation-file-ref-check | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check index d132f756d31d..047f463cdf4b 100755 --- a/scripts/documentation-file-ref-check +++ b/scripts/documentation-file-ref-check @@ -38,16 +38,31 @@ while () { my $f = $1; my $ln = $2; - # Makefiles contain nasty expressions to parse docs - next if ($f =~ m/Makefile/); + # Makefiles and scripts contain nasty expressions to parse docs + next if ($f =~ m/Makefile/ || $f =~ m/\.sh$/); + # Skip this script next if ($f eq $scriptname); - if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*\[\]\?+-]*),) { + if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*\[\]\?+-]*)(.*),) { my $prefix = $1; my $ref = $2; my $base = $2; + my $extra = $3; + # some file references are like: + # /usr/src/linux/Documentation/DMA-{API,mapping}.txt + # For now, ignore them + next if ($extra =~ m/^{/); + + # Remove footnotes at the end like: + # Documentation/devicetree/dt-object-internal.txt[1] + $ref =~ s/(txt|rst)\[\d+]$/$1/; + + # Remove ending ']' without any '[' + $ref =~ s/\].*// if (!($ref =~ m/\[/)); + + # Remove puntuation marks at the end $ref =~ s/[\,\.]+$//; my $fulref = "$prefix$ref"; From a78513c670ac5b5aa1244f93b1833c3e7d5433df Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 11:06:08 -0300 Subject: [PATCH 15/26] scripts/documentation-file-ref-check: check tools/*/Documentation Some files, like tools/memory-model/README has references to a Documentation file that is locale to it. Handle references that are relative to them too. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- scripts/documentation-file-ref-check | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check index 047f463cdf4b..078999a3fdff 100755 --- a/scripts/documentation-file-ref-check +++ b/scripts/documentation-file-ref-check @@ -78,6 +78,13 @@ while () { # Check if exists, evaluating wildcards next if (grep -e, glob("$ref $fulref")); + # Accept relative Documentation patches for tools/ + if ($f =~ m/tools/) { + my $path = $f; + $path =~ s,(.*)/.*,$1,; + next if (grep -e, glob("$path/$ref $path/$fulref")); + } + if ($fix) { if (!($ref =~ m/(scripts|Kconfig|Kbuild)/)) { $broken_ref{$ref}++; From 34962fb8070cb5a60b686a5ee11f81f2978836bd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 15:14:57 -0300 Subject: [PATCH 16/26] docs: Fix more broken references As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked that produced results are valid. Acked-by: Matthias Brugger Acked-by: Takashi Iwai Acked-by: Jeff Kirsher Acked-by: Guenter Roeck Acked-by: Miguel Ojeda Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- .../bindings/clock/st/st,clkgen.txt | 8 ++++---- .../devicetree/bindings/clock/ti/gate.txt | 2 +- .../bindings/clock/ti/interface.txt | 2 +- .../bindings/cpufreq/cpufreq-mediatek.txt | 2 +- .../bindings/devfreq/rk3399_dmc.txt | 2 +- .../bindings/gpu/arm,mali-midgard.txt | 2 +- .../bindings/gpu/arm,mali-utgard.txt | 2 +- .../devicetree/bindings/mfd/mt6397.txt | 2 +- .../devicetree/bindings/mfd/sun6i-prcm.txt | 2 +- .../bindings/mmc/exynos-dw-mshc.txt | 2 +- .../devicetree/bindings/net/dsa/ksz.txt | 2 +- .../devicetree/bindings/net/dsa/mt7530.txt | 2 +- .../devicetree/bindings/power/fsl,imx-gpc.txt | 2 +- .../bindings/power/wakeup-source.txt | 2 +- .../devicetree/bindings/usb/rockchip,dwc3.txt | 2 +- Documentation/hwmon/ina2xx | 2 +- Documentation/maintainer/pull-requests.rst | 2 +- Documentation/translations/ko_KR/howto.rst | 2 +- MAINTAINERS | 20 +++++++++---------- drivers/net/ethernet/intel/Kconfig | 8 ++++---- drivers/soundwire/stream.c | 8 ++++---- fs/Kconfig.binfmt | 2 +- fs/binfmt_misc.c | 2 +- 23 files changed, 41 insertions(+), 41 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index 7364953d0d0b..45ac19bfa0a9 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -31,10 +31,10 @@ This binding uses the common clock binding[1]. Each subnode should use the binding described in [2]..[7] [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt -[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt -[7] Documentation/devicetree/bindings/clock/st,quadfs.txt -[8] Documentation/devicetree/bindings/clock/st,flexgen.txt +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 03f8fdee62a7..56d603c1f716 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for that is used. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 3111a409fea6..3f4704040140 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate clock) and hardware autoidle enable / disable. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt Required properties: - compatible : shall be one of: diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index d36f07e0a2bb..0551c78619de 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -8,7 +8,7 @@ Required properties: "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock source (usually MAINPLL) when the original CPU PLL is under transition and not stable yet. - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for + Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for generic clock consumer properties. - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt for detail. diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index d6d2833482c9..fc2bcbe26b1e 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -12,7 +12,7 @@ Required properties: - clocks: Phandles for clock specified in "clock-names" property - clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt for details. - center-supply: DMC supply node. - status: Marks the node enabled/disabled. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index 039219df05c5..18a2cde2e5f3 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -34,7 +34,7 @@ Optional properties: - mali-supply : Phandle to regulator for the Mali device. Refer to Documentation/devicetree/bindings/regulator/regulator.txt for details. -- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt for details. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index c1f65d1dac1d..63cd91176a68 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -44,7 +44,7 @@ Optional properties: - memory-region: Memory region to allocate from, as defined in - Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt - mali-supply: Phandle to regulator for the Mali device, as defined in diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index d1df77f4d655..0ebd08af777d 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -Documentation/devicetree/bindings/soc/pwrap.txt +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt This document describes the binding for MFD device and its sub module. diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index dd2c06540485..4d21ffdb0fc1 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -9,7 +9,7 @@ Required properties: The prcm node may contain several subdevices definitions: - see Documentation/devicetree/clk/sunxi.txt for clock devices - - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset + - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset controller devices diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index a58c173b7ab9..0419a63f73a0 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host) rest of the gpios (depending on the bus-width property) are the data lines in no particular order. The format of the gpio specifier depends on the gpio controller. -(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt) +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) Example: diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index fd23904ac68e..a700943218ca 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -6,7 +6,7 @@ Required properties: - compatible: For external switch chips, compatible string must be exactly one of: "microchip,ksz9477" -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. Examples: diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index a9bc27b93ee3..aa3527f71fdc 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -31,7 +31,7 @@ Required properties for the child nodes within ports container: - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled "cpu". -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified. diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index b31d6bbeee16..726ec2875223 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -14,7 +14,7 @@ Required properties: datasheet - interrupts: Should contain one interrupt specifier for the GPC interrupt - clocks: Must contain an entry for each entry in clock-names. - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: Must include the following entries: - ipg diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 5d254ab13ebf..cfd74659fbed 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -22,7 +22,7 @@ List of legacy properties and respective binding document 3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt 4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt Documentation/devicetree/bindings/mfd/tc3589x.txt - Documentation/devicetree/bindings/input/ads7846.txt + Documentation/devicetree/bindings/input/touchscreen/ads7846.txt 5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt 6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt 7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 50a31536e975..252a05c5d976 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt Example device nodes: diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index cfd31d94c872..72d16f08e431 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -53,7 +53,7 @@ bus supply voltage. The shunt value in micro-ohms can be set via platform data or device tree at compile-time or via the shunt_resistor attribute in sysfs at run-time. Please -refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings +refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings if the device tree is used. Additionally ina226 supports update_interval attribute as described in diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst index a19db3458b56..22b271de0304 100644 --- a/Documentation/maintainer/pull-requests.rst +++ b/Documentation/maintainer/pull-requests.rst @@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command:: that will create a signed tag called ``char-misc-4.15-rc1`` based on the last commit in the ``char-misc-next`` branch, and sign it with your gpg key -(see :ref:`Documentation/maintainer/configure_git.rst `). +(see :ref:`Documentation/maintainer/configure-git.rst `). Linus will only accept pull requests based on a signed tag. Other maintainers may differ. diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst index 624654bdcd8a..a8197e072599 100644 --- a/Documentation/translations/ko_KR/howto.rst +++ b/Documentation/translations/ko_KR/howto.rst @@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다. 독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기 때문이다. - :ref:`Documentation/process/stable_kernel_rules.rst ` + :ref:`Documentation/process/stable-kernel-rules.rst ` 이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며 여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면 무엇을 해야 하는지를 설명한다. diff --git a/MAINTAINERS b/MAINTAINERS index 09554034be46..5871dd5060f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS M: David Lechner S: Maintained F: drivers/gpu/drm/tinydrm/ili9225.c -F: Documentation/devicetree/bindings/display/ili9225.txt +F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt DRM DRIVER FOR INTEL I810 VIDEO CARDS S: Orphan / Obsolete @@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS M: David Lechner S: Maintained F: drivers/gpu/drm/tinydrm/st7586.c -F: Documentation/devicetree/bindings/display/st7586.txt +F: Documentation/devicetree/bindings/display/sitronix,st7586.txt DRM DRIVER FOR SITRONIX ST7735R PANELS M: David Lechner S: Maintained F: drivers/gpu/drm/tinydrm/st7735r.c -F: Documentation/devicetree/bindings/display/st7735r.txt +F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt DRM DRIVER FOR TDFX VIDEO CARDS S: Orphan / Obsolete @@ -4824,7 +4824,7 @@ M: Eric Anholt S: Supported F: drivers/gpu/drm/v3d/ F: include/uapi/drm/v3d_drm.h -F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt +F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt T: git git://anongit.freedesktop.org/drm/drm-misc DRM DRIVERS FOR VC4 @@ -5735,7 +5735,7 @@ M: Madalin Bucur L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/freescale/fman -F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt +F: Documentation/devicetree/bindings/net/fsl-fman.txt FREESCALE QORIQ PTP CLOCK DRIVER M: Yangbo Lu @@ -7425,7 +7425,7 @@ M: Linus Walleij L: linux-iio@vger.kernel.org S: Maintained F: drivers/iio/gyro/mpu3050* -F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt +F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt IOC3 ETHERNET DRIVER M: Ralf Baechle @@ -8700,7 +8700,7 @@ M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained F: Documentation/hwmon/max6697 -F: Documentation/devicetree/bindings/i2c/max6697.txt +F: Documentation/devicetree/bindings/hwmon/max6697.txt F: drivers/hwmon/max6697.c F: include/linux/platform_data/max6697.h @@ -9080,7 +9080,7 @@ M: Martin Donnelly M: Martyn Welch S: Maintained F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c -F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt +F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt MEGARAID SCSI/SAS DRIVERS M: Kashyap Desai @@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER M: Willy Tarreau M: Ksenija Stanojevic S: Odd Fixes -F: Documentation/misc-devices/lcd-panel-cgram.txt +F: Documentation/auxdisplay/lcd-panel-cgram.txt F: drivers/misc/panel.c PARALLEL PORT SUBSYSTEM @@ -13291,7 +13291,7 @@ M: Vinod Koul L: alsa-devel@alsa-project.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git S: Supported -F: Documentation/sound/alsa/compress_offload.txt +F: Documentation/sound/designs/compress-offload.rst F: include/sound/compress_driver.h F: include/uapi/sound/compress_* F: sound/core/compress_offload.c diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 14d287bed33c..1ab613eb5796 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -33,7 +33,7 @@ config E100 to identify the adapter. More specific information on configuring the driver is in - . + . To compile this driver as a module, choose M here. The module will be called e100. @@ -49,7 +49,7 @@ config E1000 More specific information on configuring the driver is in - . + . To compile this driver as a module, choose M here. The module will be called e1000. @@ -94,7 +94,7 @@ config IGB More specific information on configuring the driver is in - . + . To compile this driver as a module, choose M here. The module will be called igb. @@ -130,7 +130,7 @@ config IGBVF More specific information on configuring the driver is in - . + . To compile this driver as a module, choose M here. The module will be called igbvf. diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 8974a0fcda1b..4b5e250e8615 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1291,7 +1291,7 @@ restore_params: * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_prepare_stream(struct sdw_stream_runtime *stream) { @@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream) * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_enable_stream(struct sdw_stream_runtime *stream) { @@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream) * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_disable_stream(struct sdw_stream_runtime *stream) { @@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream) * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_deprepare_stream(struct sdw_stream_runtime *stream) { diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 57a27c42b5ac..56df483de619 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -168,7 +168,7 @@ config BINFMT_MISC will automatically feed it to the correct interpreter. You can do other nice things, too. Read the file - to learn how to use this + to learn how to use this feature, for information about how to include Java support. and for information about how to include Mono-based .NET support. diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index 4de191563261..4b5fff31ef27 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -4,7 +4,7 @@ * Copyright (C) 1997 Richard Günther * * binfmt_misc detects binaries via a magic or filename extension and invokes - * a specified wrapper. See Documentation/binfmt_misc.txt for more details. + * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt From 042c768e065c219750742ba63e675517b4e38020 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 07:18:45 -0300 Subject: [PATCH 17/26] bindings: nvmem/zii: Fix location of nvmem.txt The location pointed there is missing "bindings/" on its path. Acked-by: Srinivas Kandagatla Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt index d5e22fc67d66..0df79d9e07ec 100644 --- a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt +++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt @@ -18,7 +18,7 @@ Optional properties: Data cells: Data cells are child nodes of eerpom node, bindings for which are -documented in Documentation/bindings/nvmem/nvmem.txt +documented in Documentation/devicetree/bindings/nvmem/nvmem.txt Example: From 1ca2c806d85272f5d412910df160d82c2234c0e0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 07:43:07 -0300 Subject: [PATCH 18/26] kernel-parameters.txt: fix pointers to sound parameters The alsa parameters file was renamed to alsa-configuration.rst. With regards to OSS, it got retired as a hole by at changeset 727dede0ba8a ("sound: Retire OSS"). So, it doesn't make sense to keep mentioning it at kernel-parameters.txt. Fixes: 727dede0ba8a ("sound: Retire OSS") Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/admin-guide/kernel-parameters.txt | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 6fa3f31ed2a5..efc7aa7a0670 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -256,7 +256,7 @@ (may crash computer or cause data corruption) ALSA [HW,ALSA] - See Documentation/sound/alsa/alsa-parameters.txt + See Documentation/sound/alsa-configuration.rst alignment= [KNL,ARM] Allow the default userspace alignment fault handler @@ -2926,9 +2926,6 @@ This will also cause panics on machine check exceptions. Useful together with panic=30 to trigger a reboot. - OSS [HW,OSS] - See Documentation/sound/oss/oss-parameters.txt - page_owner= [KNL] Boot-time page_owner enabling option. Storage of the information about who allocated each page is disabled in default. With this switch, From 2f635cff0e902a9e70e1039e471645c9167bb398 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 08:01:00 -0300 Subject: [PATCH 19/26] MAINTAINERS: fix location of some display DT bindings Those files got a manufacturer's name prepended and were moved around. Adjust their references accordingly. Also, due those movements, Documentation/devicetree/bindings/video doesn't exist anymore. Cc: David Airlie Cc: David Lechner Cc: Peter Senna Tschudin Cc: Martin Donnelly Cc: Martyn Welch Cc: Stefan Agner Cc: Alison Wang Cc: Eric Anholt Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- MAINTAINERS | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5871dd5060f6..43eee2fb8798 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4638,7 +4638,6 @@ F: drivers/gpu/drm/ F: drivers/gpu/vga/ F: Documentation/devicetree/bindings/display/ F: Documentation/devicetree/bindings/gpu/ -F: Documentation/devicetree/bindings/video/ F: Documentation/gpu/ F: include/drm/ F: include/uapi/drm/ @@ -4683,7 +4682,7 @@ M: Boris Brezillon L: dri-devel@lists.freedesktop.org S: Supported F: drivers/gpu/drm/atmel-hlcdc/ -F: Documentation/devicetree/bindings/drm/atmel/ +F: Documentation/devicetree/bindings/display/atmel/ T: git git://anongit.freedesktop.org/drm/drm-misc DRM DRIVERS FOR BRIDGE CHIPS @@ -4714,7 +4713,7 @@ S: Supported F: drivers/gpu/drm/fsl-dcu/ F: Documentation/devicetree/bindings/display/fsl,dcu.txt F: Documentation/devicetree/bindings/display/fsl,tcon.txt -F: Documentation/devicetree/bindings/display/panel/nec,nl4827hc19_05b.txt +F: Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt DRM DRIVERS FOR FREESCALE IMX M: Philipp Zabel From 5efa6f8473cc50299c0bdd68280a472993cc5c32 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 08:59:37 -0300 Subject: [PATCH 20/26] MAINTAINERS: fix location of DT npcm files The specified locations are not right. Fix the wildcard logic to point to the correct directories. Without that, get-maintainer won't get things right: $ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) After the patch, it will properly point to NPCM arch maintainers: $ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp avifishman70@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE) tmaimon77@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE) robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Cc: Avi Fishman Cc: Tomer Maimon Cc: Patrick Venture Cc: Nancy Yuen Cc: Brendan Higgins Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 43eee2fb8798..783ce44b3e7a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1732,7 +1732,8 @@ F: arch/arm/mach-npcm/ F: arch/arm/boot/dts/nuvoton-npcm* F: include/dt-bindings/clock/nuvoton,npcm7xx-clks.h F: drivers/*/*npcm* -F: Documentation/*/*npcm* +F: Documentation/devicetree/bindings/*/*npcm* +F: Documentation/devicetree/bindings/*/*/*npcm* ARM/NUVOTON W90X900 ARM ARCHITECTURE M: Wan ZongShun From 6c79521fa8c279a112b883e1aafb8f594c34b2c9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 09:39:01 -0300 Subject: [PATCH 21/26] devicetree: fix some bindings file names There were some file movements that changed the location for some DT bindings. Fix them with: scripts/documentation-file-ref-check --fix After manually checking if the new file makes sense. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt | 2 +- .../devicetree/bindings/power/supply/ab8500/chargalg.txt | 2 +- .../devicetree/bindings/power/supply/ab8500/charger.txt | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt index 0ba1bcc7f33a..f181e46d8e07 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt @@ -13,4 +13,4 @@ Required Properties: }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt index ef5328371122..56636f927203 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt @@ -13,4 +13,4 @@ ab8500_chargalg { }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt index 6bdbb08ea9e0..24ada03e07b4 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt @@ -22,4 +22,4 @@ Required Properties: }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt From 18ba1f98607ef1b88d02eabe4d2b16b9bdc10e40 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 12:24:41 -0300 Subject: [PATCH 22/26] devicetree: fix name of pinctrl-bindings.txt Rename: pinctrl-binding.txt -> pinctrl-bindings.txt In order to match the current name of this file. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt | 2 +- Documentation/devicetree/bindings/mfd/as3722.txt | 2 +- .../devicetree/bindings/mmc/microchip,sdhci-pic32.txt | 2 +- Documentation/devicetree/bindings/mmc/sdhci-st.txt | 2 +- .../devicetree/bindings/pinctrl/pinctrl-max77620.txt | 4 ++-- .../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 4 ++-- Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt | 4 ++-- .../devicetree/bindings/serial/microchip,pic32-uart.txt | 2 +- Documentation/devicetree/bindings/spi/spi-st-ssc.txt | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index c7888d6f6408..880d4d70c9fd 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num) must be defined for each tsin child node. - pinctrl-0 : phandle referencing pin configuration for this tsin configuration -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Required properties (tsin (child) node): diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index 0b2a6099aa20..5297b2210704 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -46,7 +46,7 @@ is required: Following properties are require if pin control setting is required at boot. - pinctrl-names: A pinctrl state named "default" be defined, using the - bindings in pinctrl/pinctrl-binding.txt. + bindings in pinctrl/pinctrl-bindings.txt. - pinctrl[0...n]: Properties to contain the phandle that refer to different nodes of pin control settings. These nodes represents the pin control setting of state 0 to state n. Each of these diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt index 3149297b3933..f064528effed 100644 --- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt +++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt @@ -12,7 +12,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the SDHCI controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 6b3d40ca395e..ccf82b4ee838 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -20,7 +20,7 @@ Required properties: - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - reg: This must provide the host controller base address and it can also contain the FlashSS Top register for TX/RX delay used by the driver diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt index ad4fce3552bb..511fc234558b 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt @@ -11,9 +11,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per . +- pinctrl-names: A pinctrl state named per . - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - . + . The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index a677145ae6d1..625a22e2f211 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -101,9 +101,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per . +- pinctrl-names: A pinctrl state named per . - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - . + . The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index eee3dc260934..cbcbd31e3ce8 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -10,9 +10,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per . +- pinctrl-names: A pinctrl state named per . - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - . + . The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt index 7a34345d0ca3..c8dd440e9747 100644 --- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt +++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt @@ -8,7 +8,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the UART peripheral. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Optional properties: - cts-gpios: CTS pin for UART diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt index fe54959ec957..1bdc4709e474 100644 --- a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt +++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt @@ -9,7 +9,7 @@ Required properties: - clocks : Must contain an entry for each name in clock-names See ../clk/* - pinctrl-names : Uses "default", can use "sleep" if provided - See ../pinctrl/pinctrl-binding.txt + See ../pinctrl/pinctrl-bindings.txt Optional properties: - cs-gpios : List of GPIO chip selects From e5ca4259b8d51b702de736ee6b6355a655c7095d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 12:30:30 -0300 Subject: [PATCH 23/26] devicetree: fix a series of wrong file references As files got renamed, their references broke. Manually fix a series of broken refs at the DT bindings. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- .../devicetree/bindings/input/rmi4/rmi_2d_sensor.txt | 2 +- Documentation/devicetree/bindings/mfd/sun6i-prcm.txt | 2 +- .../devicetree/bindings/pci/hisilicon-pcie.txt | 2 +- Documentation/devicetree/bindings/pci/kirin-pcie.txt | 2 +- .../devicetree/bindings/pci/pci-keystone.txt | 4 ++-- .../devicetree/bindings/sound/st,stm32-i2s.txt | 2 +- .../devicetree/bindings/sound/st,stm32-sai.txt | 2 +- MAINTAINERS | 12 ++++++------ 8 files changed, 14 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt index f2c30c8b725d..9afffbdf6e28 100644 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt @@ -12,7 +12,7 @@ Additional documentation for F11 can be found at: http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touch +Description in Documentation/devicetree/bindings/input/touchscreen - touchscreen-inverted-x - touchscreen-inverted-y - touchscreen-swapped-x-y diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 4d21ffdb0fc1..daa091c2e67b 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -8,7 +8,7 @@ Required properties: - reg: The PRCM registers range The prcm node may contain several subdevices definitions: - - see Documentation/devicetree/clk/sunxi.txt for clock devices + - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset controller devices diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 7bf9df047a1e..0dcb87d6554f 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt index 6e217c63123d..6bbe43818ad5 100644 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Kirin SoCs PCIe host DT description Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 7e05487544ed..3d4a209b0fd0 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -3,9 +3,9 @@ TI Keystone PCIe interface Keystone PCI host Controller is based on the Synopsys DesignWare PCI hardware version 3.65. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt +Documentation/devicetree/bindings/pci/designware-pcie.txt -Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt +Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt for the details of DesignWare DT bindings. Additional properties are described here as well as properties that are not applicable. diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt index 4bda52042402..58c341300552 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt @@ -18,7 +18,7 @@ Required properties: See Documentation/devicetree/bindings/dma/stm32-dma.txt. - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt Optional properties: - resets: Reference to a reset controller asserting the reset controller diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f301cdf0b7e6..3a3fc506e43a 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -37,7 +37,7 @@ SAI subnodes required properties: "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt SAI subnodes Optional properties: - st,sync: specify synchronization mode. diff --git a/MAINTAINERS b/MAINTAINERS index 783ce44b3e7a..fd3fc63f2759 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6966,7 +6966,7 @@ IIO MULTIPLEXER M: Peter Rosin L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt +F: Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt F: drivers/iio/multiplexer/iio-mux.c IIO SUBSYSTEM AND DRIVERS @@ -9696,7 +9696,7 @@ MXSFB DRM DRIVER M: Marek Vasut S: Supported F: drivers/gpu/drm/mxsfb/ -F: Documentation/devicetree/bindings/display/mxsfb-drm.txt +F: Documentation/devicetree/bindings/display/mxsfb.txt MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) M: Chris Lee @@ -10885,7 +10885,7 @@ M: Will Deacon L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/pci/controller-generic-pci.txt +F: Documentation/devicetree/bindings/pci/host-generic-pci.txt F: drivers/pci/controller/pci-host-common.c F: drivers/pci/controller/pci-host-generic.c @@ -11066,7 +11066,7 @@ M: Xiaowei Song M: Binghui Wang L: linux-pci@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/pci/pcie-kirin.txt +F: Documentation/devicetree/bindings/pci/kirin-pcie.txt F: drivers/pci/controller/dwc/pcie-kirin.c PCIE DRIVER FOR HISILICON STB @@ -12457,7 +12457,7 @@ L: linux-crypto@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Maintained F: drivers/crypto/exynos-rng.c -F: Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt +F: Documentation/devicetree/bindings/rng/samsung,exynos4-rng.txt SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER M: Łukasz Stelmach @@ -13571,7 +13571,7 @@ F: drivers/*/stm32-*timer* F: drivers/pwm/pwm-stm32* F: include/linux/*/stm32-*tim* F: Documentation/ABI/testing/*timer-stm32 -F: Documentation/devicetree/bindings/*/stm32-*timer +F: Documentation/devicetree/bindings/*/stm32-*timer* F: Documentation/devicetree/bindings/pwm/pwm-stm32* STMMAC ETHERNET DRIVER From 6ec71b205d2aab3d579471f487a9c0704689d2d4 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 12:32:05 -0300 Subject: [PATCH 24/26] ABI: sysfs-devices-system-cpu: remove a broken reference This file doesn't exist anymore: Documentation/cpu-freq/user-guide.txt As the ABI already points to Documentation/cpu-freq, just remove the broken link and the associated text. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/ABI/testing/sysfs-devices-system-cpu | 3 --- 1 file changed, 3 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index bd4975e132d3..9c5e7732d249 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -238,9 +238,6 @@ Description: Discover and change clock speed of CPUs See files in Documentation/cpu-freq/ for more information. - In particular, read Documentation/cpu-freq/user-guide.txt - to learn how to control the knobs. - What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus Date: June 2013 From 315e6bc538ae271d55d0685dd3f937346ab2f60b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 12:33:06 -0300 Subject: [PATCH 25/26] Documentation: rstFlatTable.py: fix a broken reference The old HOWTO was removed a long time ago. The flat table version is not metioned elsewhere, so just get rid of the text. Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/sphinx/rstFlatTable.py | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/sphinx/rstFlatTable.py b/Documentation/sphinx/rstFlatTable.py index 25feb0d35e7a..2019a55f6b18 100755 --- a/Documentation/sphinx/rstFlatTable.py +++ b/Documentation/sphinx/rstFlatTable.py @@ -53,8 +53,6 @@ from docutils.utils import SystemMessagePropagation # common globals # ============================================================================== -# The version numbering follows numbering of the specification -# (Documentation/books/kernel-doc-HOWTO). __version__ = '1.0' PY3 = sys.version_info[0] == 3 From 44348e8ac145d78171c5a6f4a8bdb01b70969fc2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 12:34:32 -0300 Subject: [PATCH 26/26] fix a series of Documentation/ broken file name references As files move around, their previous links break. Fix the references for them. Acked-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- Documentation/translations/zh_CN/io_ordering.txt | 2 +- drivers/dma/dmaengine.c | 2 +- drivers/platform/x86/Kconfig | 2 +- drivers/sbus/char/oradax.c | 2 +- fs/befs/ChangeLog | 2 +- fs/orangefs/orangefs-sysfs.c | 2 +- include/linux/platform_data/sc18is602.h | 2 +- kernel/power/main.c | 5 +++-- 8 files changed, 10 insertions(+), 9 deletions(-) diff --git a/Documentation/translations/zh_CN/io_ordering.txt b/Documentation/translations/zh_CN/io_ordering.txt index e592daf4e014..1f8127bdd415 100644 --- a/Documentation/translations/zh_CN/io_ordering.txt +++ b/Documentation/translations/zh_CN/io_ordering.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/io_orderings.txt +Chinese translated version of Documentation/io_ordering.txt If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index b451354735d3..08ba8473a284 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -38,7 +38,7 @@ * Each device has a channels list, which runs unlocked but is never modified * once the device is registered, it's just setup by the driver. * - * See Documentation/dmaengine.txt for more details + * See Documentation/driver-api/dmaengine for more details */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f27cb186437d..ac4d48830415 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1052,7 +1052,7 @@ config SAMSUNG_LAPTOP function keys, wireless LED, LCD backlight level. It may also provide some sysfs files described in - + To compile this driver as a module, choose M here: the module will be called samsung-laptop. diff --git a/drivers/sbus/char/oradax.c b/drivers/sbus/char/oradax.c index 1754f55e2fac..524f9ea62e52 100644 --- a/drivers/sbus/char/oradax.c +++ b/drivers/sbus/char/oradax.c @@ -30,7 +30,7 @@ * the recommended way for applications to use the coprocessor, and * the driver interface is not intended for general use. * - * See Documentation/sparc/oradax/oracle_dax.txt for more details. + * See Documentation/sparc/oradax/oracle-dax.txt for more details. */ #include diff --git a/fs/befs/ChangeLog b/fs/befs/ChangeLog index 16f2dfe8c2f7..aff7eec8f327 100644 --- a/fs/befs/ChangeLog +++ b/fs/befs/ChangeLog @@ -389,7 +389,7 @@ Version 0.4 (2001-10-28) (fs/nls/Config.in) * Added Configure.help entries for CONFIG_BEFS_FS and CONFIG_DEBUG_BEFS - (Documentation/Configure.help) + (currently at fs/befs/Kconfig) 2001-08-?? ========== diff --git a/fs/orangefs/orangefs-sysfs.c b/fs/orangefs/orangefs-sysfs.c index 079a465796f3..dd28079f518c 100644 --- a/fs/orangefs/orangefs-sysfs.c +++ b/fs/orangefs/orangefs-sysfs.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Documentation/ABI/stable/orangefs-sysfs: + * Documentation/ABI/stable/sysfs-fs-orangefs: * * What: /sys/fs/orangefs/perf_counter_reset * Date: June 2015 diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h index 997b06634152..18602cab7799 100644 --- a/include/linux/platform_data/sc18is602.h +++ b/include/linux/platform_data/sc18is602.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/spi/sc18is602 file. + * For further information, see the Documentation/spi/spi-sc18is602 file. */ /** diff --git a/kernel/power/main.c b/kernel/power/main.c index 705c2366dafe..d9706da10930 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -455,8 +455,9 @@ struct kobject *power_kobj; * state - control system sleep states. * * show() returns available sleep state labels, which may be "mem", "standby", - * "freeze" and "disk" (hibernation). See Documentation/power/states.txt for a - * description of what they mean. + * "freeze" and "disk" (hibernation). + * See Documentation/admin-guide/pm/sleep-states.rst for a description of + * what they mean. * * store() accepts one of those strings, translates it into the proper * enumerated value, and initiates a suspend transition.