1
0
Fork 0

drm/i915: rewrite hsw/bdw audio codec enable/disable sequences

There's some serious confusion regarding ELD valid bit that gets set and
cleared back and forth etc. Rewrite it all based on the documented audio
codec enable/disable sequences.

v3: replace vblank wait with a comment

v4: expand the comment on what should be done with the vblank wait

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
hifive-unleashed-5.1
Jani Nikula 2014-11-04 10:30:23 +02:00 committed by Daniel Vetter
parent c46f111f51
commit 5fad84a753
1 changed files with 57 additions and 70 deletions

View File

@ -132,14 +132,26 @@ static void g4x_audio_codec_enable(struct drm_connector *connector,
static void hsw_audio_codec_disable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
enum pipe pipe = intel_crtc->pipe;
uint32_t tmp;
DRM_DEBUG_KMS("Disable audio codec on pipe %c\n", pipe_name(pipe));
/* Disable timestamps */
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
tmp |= AUD_CONFIG_N_PROG_ENABLE;
tmp &= ~AUD_CONFIG_UPPER_N_MASK;
tmp &= ~AUD_CONFIG_LOWER_N_MASK;
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
/* Invalidate ELD */
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
tmp &= ~(AUDIO_ELD_VALID_A << (pipe * 4));
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
}
@ -149,77 +161,52 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
uint8_t *eld = connector->eld;
uint32_t eldv;
enum pipe pipe = intel_crtc->pipe;
const uint8_t *eld = connector->eld;
uint32_t tmp;
int len, i;
enum pipe pipe = intel_crtc->pipe;
enum port port;
int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
int aud_config = HSW_AUD_CFG(pipe);
int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
/* Audio output enable */
DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
tmp = I915_READ(aud_cntrl_st2);
tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
I915_WRITE(aud_cntrl_st2, tmp);
POSTING_READ(aud_cntrl_st2);
DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
pipe_name(pipe), eld[2]);
/* Set ELD valid state */
tmp = I915_READ(aud_cntrl_st2);
DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
I915_WRITE(aud_cntrl_st2, tmp);
tmp = I915_READ(aud_cntrl_st2);
DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp);
/* Enable HDMI mode */
tmp = I915_READ(aud_config);
DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp);
/* clear N_programing_enable and N_value_index */
tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
I915_WRITE(aud_config, tmp);
DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
eldv = AUDIO_ELD_VALID_A << (pipe * 4);
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
else
I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
if (intel_eld_uptodate(connector,
aud_cntrl_st2, eldv,
aud_cntl_st, IBX_ELD_ADDRESS_MASK,
hdmiw_hdmiedid))
return;
tmp = I915_READ(aud_cntrl_st2);
tmp &= ~eldv;
I915_WRITE(aud_cntrl_st2, tmp);
tmp = I915_READ(aud_cntl_st);
tmp &= ~IBX_ELD_ADDRESS_MASK;
I915_WRITE(aud_cntl_st, tmp);
port = (tmp >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
DRM_DEBUG_DRIVER("port num:%d\n", port);
len = min_t(int, eld[2], 21); /* 84 bytes of hw ELD buffer */
DRM_DEBUG_DRIVER("ELD size %d\n", len);
for (i = 0; i < len; i++)
I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
tmp = I915_READ(aud_cntrl_st2);
tmp |= eldv;
I915_WRITE(aud_cntrl_st2, tmp);
/* XXX: Transitional */
/* Enable audio presence detect, invalidate ELD */
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
tmp |= AUDIO_OUTPUT_ENABLE_A << (pipe * 4);
tmp &= ~(AUDIO_ELD_VALID_A << (pipe * 4));
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
/*
* FIXME: We're supposed to wait for vblank here, but we have vblanks
* disabled during the mode set. The proper fix would be to push the
* rest of the setup into a vblank work item, queued here, but the
* infrastructure is not there yet.
*/
/* Reset ELD write address */
tmp = I915_READ(HSW_AUD_DIP_ELD_CTRL(pipe));
tmp &= ~IBX_ELD_ADDRESS_MASK;
I915_WRITE(HSW_AUD_DIP_ELD_CTRL(pipe), tmp);
/* Up to 84 bytes of hw ELD buffer */
len = min_t(int, eld[2], 21);
for (i = 0; i < len; i++)
I915_WRITE(HSW_AUD_EDID_DATA(pipe), *((uint32_t *)eld + i));
/* ELD valid */
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
tmp |= AUDIO_ELD_VALID_A << (pipe * 4);
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
/* Enable timestamps */
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
else
tmp |= audio_config_hdmi_pixel_clock(mode);
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
}
static void ilk_audio_codec_enable(struct drm_connector *connector,