Merge branch 'remotes/lorenzo/pci/brcmstb'

- Add brcmstb PCIe bindings for Raspberry Pi 4 (Jim Quinlan)

  - Add Broadcom STB PCIe host controller driver (Jim Quinlan)

  - Add MSI support for Broadcom STB PCIe host controller driver (Jim
    Quinlan)

* remotes/lorenzo/pci/brcmstb:
  PCI: brcmstb: Add MSI support
  PCI: brcmstb: Add Broadcom STB PCIe host controller driver
  dt-bindings: PCI: Add bindings for brcmstb's PCIe device

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+required:
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+            };
+    };

drivers/pci/controller/Kconfig

@@ -252,6 +252,15 @@ config VMD
 	  To compile this driver as a module, choose M here: the
 	  module will be called vmd.
 
+config PCIE_BRCMSTB
+	tristate "Broadcom Brcmstb PCIe host controller"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI_IRQ_DOMAIN
+	help
+	  Say Y here to enable PCIe host controller support for
+	  Broadcom STB based SoCs, like the Raspberry Pi 4.
+
 config PCI_HYPERV_INTERFACE
 	tristate "Hyper-V PCI Interface"
 	depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64

drivers/pci/controller/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
 obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
 obj-$(CONFIG_VMD) += vmd.o
+obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/