1
0
Fork 0

rcu: Add softirq-stall indications to stall-warning messages

If RCU's softirq handler is prevented from executing, an RCU CPU stall
warning can result.  Ways to prevent RCU's softirq handler from executing
include: (1) CPU spinning with interrupts disabled, (2) infinite loop
in some softirq handler, and (3) in -rt kernels, an infinite loop in a
set of real-time threads running at priorities higher than that of RCU's
softirq handler.

Because this situation can be difficult to track down, this commit causes
the count of RCU softirq handler invocations to be printed with RCU
CPU stall warnings.  This information does require some interpretation,
as now documented in Documentation/RCU/stallwarn.txt.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
hifive-unleashed-5.1
Paul E. McKenney 2013-03-06 13:37:09 -08:00
parent 49d0de082c
commit 6231069bda
3 changed files with 32 additions and 10 deletions

View File

@ -92,14 +92,14 @@ If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
more information is printed with the stall-warning message, for example:
INFO: rcu_preempt detected stall on CPU
0: (63959 ticks this GP) idle=241/3fffffffffffffff/0
0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543
(t=65000 jiffies)
In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
printed:
INFO: rcu_preempt detected stall on CPU
0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending
0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D
(t=65000 jiffies)
The "(64628 ticks this GP)" indicates that this CPU has taken more
@ -116,13 +116,28 @@ number between the two "/"s is the value of the nesting, which will
be a small positive number if in the idle loop and a very large positive
number (as shown above) otherwise.
For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is
not in the process of trying to force itself into dyntick-idle state, the
"." indicates that the CPU has not given up forcing RCU into dyntick-idle
mode (it would be "H" otherwise), and the "timer not pending" indicates
that the CPU has not recently forced RCU into dyntick-idle mode (it
would otherwise indicate the number of microseconds remaining in this
forced state).
The "softirq=" portion of the message tracks the number of RCU softirq
handlers that the stalled CPU has executed. The number before the "/"
is the number that had executed since boot at the time that this CPU
last noted the beginning of a grace period, which might be the current
(stalled) grace period, or it might be some earlier grace period (for
example, if the CPU might have been in dyntick-idle mode for an extended
time period. The number after the "/" is the number that have executed
since boot until the current time. If this latter number stays constant
across repeated stall-warning messages, it is possible that RCU's softirq
handlers are no longer able to execute on this CPU. This can happen if
the stalled CPU is spinning with interrupts are disabled, or, in -rt
kernels, if a high-priority process is starving RCU's softirq handler.
For CONFIG_RCU_FAST_NO_HZ kernels, the "last_accelerate:" prints the
low-order 16 bits (in hex) of the jiffies counter when this CPU last
invoked rcu_try_advance_all_cbs() from rcu_needs_cpu() or last invoked
rcu_accelerate_cbs() from rcu_prepare_for_idle(). The "nonlazy_posted:"
prints the number of non-lazy callbacks posted since the last call to
rcu_needs_cpu(). Finally, an "L" indicates that there are currently
no non-lazy callbacks ("." is printed otherwise, as shown above) and
"D" indicates that dyntick-idle processing is enabled ("." is printed
otherwise, for example, if disabled via the "nohz=" kernel boot parameter).
Multiple Warnings From One Stall

View File

@ -325,6 +325,11 @@ struct rcu_data {
struct task_struct *nocb_kthread;
#endif /* #ifdef CONFIG_RCU_NOCB_CPU */
/* 8) RCU CPU stall data. */
#ifdef CONFIG_RCU_CPU_STALL_INFO
unsigned int softirq_snap; /* Snapshot of softirq activity. */
#endif /* #ifdef CONFIG_RCU_CPU_STALL_INFO */
int cpu;
struct rcu_state *rsp;
};

View File

@ -2070,10 +2070,11 @@ static void print_cpu_stall_info(struct rcu_state *rsp, int cpu)
ticks_value = rsp->gpnum - rdp->gpnum;
}
print_cpu_stall_fast_no_hz(fast_no_hz, cpu);
printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d %s\n",
printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d softirq=%u/%u %s\n",
cpu, ticks_value, ticks_title,
atomic_read(&rdtp->dynticks) & 0xfff,
rdtp->dynticks_nesting, rdtp->dynticks_nmi_nesting,
rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu),
fast_no_hz);
}
@ -2087,6 +2088,7 @@ static void print_cpu_stall_info_end(void)
static void zero_cpu_stall_ticks(struct rcu_data *rdp)
{
rdp->ticks_this_gp = 0;
rdp->softirq_snap = kstat_softirqs_cpu(RCU_SOFTIRQ, smp_processor_id());
}
/* Increment ->ticks_this_gp for all flavors of RCU. */