From 62e7ca5280fd8cbf523970757e13f0324ce0daa0 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 6 Aug 2014 16:09:21 -0700 Subject: [PATCH] zlib: clean up some dead code Cleanup unused `if 0'-ed functions, which have been dead since 2006 (commits 87c2ce3b9305 ("lib/zlib*: cleanups") by Adrian Bunk and 4f3865fb57a0 ("zlib_inflate: Upgrade library code to a recent version") by Richard Purdie): - zlib_deflateSetDictionary - zlib_deflateParams - zlib_deflateCopy - zlib_inflateSync - zlib_syncsearch - zlib_inflateSetDictionary - zlib_inflatePrime Signed-off-by: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/zlib.h | 118 ------------------------------ lib/zlib_deflate/deflate.c | 143 ------------------------------------- lib/zlib_inflate/inflate.c | 132 ---------------------------------- 3 files changed, 393 deletions(-) diff --git a/include/linux/zlib.h b/include/linux/zlib.h index 9c5a6b4de0a3..197abb2a54c5 100644 --- a/include/linux/zlib.h +++ b/include/linux/zlib.h @@ -493,64 +493,6 @@ extern int deflateInit2 (z_streamp strm, method). msg is set to null if there is no error message. deflateInit2 does not perform any compression: this will be done by deflate(). */ - -#if 0 -extern int zlib_deflateSetDictionary (z_streamp strm, - const Byte *dictionary, - uInt dictLength); -#endif -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any - call of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size in - deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front. - - Upon return of this function, strm->adler is set to the Adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The Adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). -*/ - -#if 0 -extern int zlib_deflateCopy (z_streamp dest, z_streamp source); -#endif - -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ extern int zlib_deflateReset (z_streamp strm); /* @@ -568,27 +510,6 @@ static inline unsigned long deflateBound(unsigned long s) return s + ((s + 7) >> 3) + ((s + 63) >> 6) + 11; } -#if 0 -extern int zlib_deflateParams (z_streamp strm, int level, int strategy); -#endif -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different - strategy. If the compression level is changed, the input available so far - is compressed with the old level (and may be flushed); the new level will - take effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to - be compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR - if strm->avail_out was zero. -*/ - /* extern int inflateInit2 (z_streamp strm, int windowBits); @@ -631,45 +552,6 @@ extern int inflateInit2 (z_streamp strm, int windowBits); and avail_out are unchanged.) */ -extern int zlib_inflateSetDictionary (z_streamp strm, - const Byte *dictionary, - uInt dictLength); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate, - if that call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by that call of inflate. - The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called - immediately after inflateInit2() or inflateReset() and before any call of - inflate() to set the dictionary. The application must insure that the - dictionary that was used for compression is provided. - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -#if 0 -extern int zlib_inflateSync (z_streamp strm); -#endif -/* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ - extern int zlib_inflateReset (z_streamp strm); /* This function is equivalent to inflateEnd followed by inflateInit, diff --git a/lib/zlib_deflate/deflate.c b/lib/zlib_deflate/deflate.c index d63381e8e333..d20ef458f137 100644 --- a/lib/zlib_deflate/deflate.c +++ b/lib/zlib_deflate/deflate.c @@ -249,52 +249,6 @@ int zlib_deflateInit2( return zlib_deflateReset(strm); } -/* ========================================================================= */ -#if 0 -int zlib_deflateSetDictionary( - z_streamp strm, - const Byte *dictionary, - uInt dictLength -) -{ - deflate_state *s; - uInt length = dictLength; - uInt n; - IPos hash_head = 0; - - if (strm == NULL || strm->state == NULL || dictionary == NULL) - return Z_STREAM_ERROR; - - s = (deflate_state *) strm->state; - if (s->status != INIT_STATE) return Z_STREAM_ERROR; - - strm->adler = zlib_adler32(strm->adler, dictionary, dictLength); - - if (length < MIN_MATCH) return Z_OK; - if (length > MAX_DIST(s)) { - length = MAX_DIST(s); -#ifndef USE_DICT_HEAD - dictionary += dictLength - length; /* use the tail of the dictionary */ -#endif - } - memcpy((char *)s->window, dictionary, length); - s->strstart = length; - s->block_start = (long)length; - - /* Insert all strings in the hash table (except for the last two bytes). - * s->lookahead stays null, so s->ins_h will be recomputed at the next - * call of fill_window. - */ - s->ins_h = s->window[0]; - UPDATE_HASH(s, s->ins_h, s->window[1]); - for (n = 0; n <= length - MIN_MATCH; n++) { - INSERT_STRING(s, n, hash_head); - } - if (hash_head) hash_head = 0; /* to make compiler happy */ - return Z_OK; -} -#endif /* 0 */ - /* ========================================================================= */ int zlib_deflateReset( z_streamp strm @@ -326,45 +280,6 @@ int zlib_deflateReset( return Z_OK; } -/* ========================================================================= */ -#if 0 -int zlib_deflateParams( - z_streamp strm, - int level, - int strategy -) -{ - deflate_state *s; - compress_func func; - int err = Z_OK; - - if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR; - s = (deflate_state *) strm->state; - - if (level == Z_DEFAULT_COMPRESSION) { - level = 6; - } - if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) { - return Z_STREAM_ERROR; - } - func = configuration_table[s->level].func; - - if (func != configuration_table[level].func && strm->total_in != 0) { - /* Flush the last buffer: */ - err = zlib_deflate(strm, Z_PARTIAL_FLUSH); - } - if (s->level != level) { - s->level = level; - s->max_lazy_match = configuration_table[level].max_lazy; - s->good_match = configuration_table[level].good_length; - s->nice_match = configuration_table[level].nice_length; - s->max_chain_length = configuration_table[level].max_chain; - } - s->strategy = strategy; - return err; -} -#endif /* 0 */ - /* ========================================================================= * Put a short in the pending buffer. The 16-bit value is put in MSB order. * IN assertion: the stream state is correct and there is enough room in @@ -568,64 +483,6 @@ int zlib_deflateEnd( return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; } -/* ========================================================================= - * Copy the source state to the destination state. - */ -#if 0 -int zlib_deflateCopy ( - z_streamp dest, - z_streamp source -) -{ -#ifdef MAXSEG_64K - return Z_STREAM_ERROR; -#else - deflate_state *ds; - deflate_state *ss; - ush *overlay; - deflate_workspace *mem; - - - if (source == NULL || dest == NULL || source->state == NULL) { - return Z_STREAM_ERROR; - } - - ss = (deflate_state *) source->state; - - *dest = *source; - - mem = (deflate_workspace *) dest->workspace; - - ds = &(mem->deflate_memory); - - dest->state = (struct internal_state *) ds; - *ds = *ss; - ds->strm = dest; - - ds->window = (Byte *) mem->window_memory; - ds->prev = (Pos *) mem->prev_memory; - ds->head = (Pos *) mem->head_memory; - overlay = (ush *) mem->overlay_memory; - ds->pending_buf = (uch *) overlay; - - memcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); - memcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); - memcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); - memcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); - - ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); - ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); - ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; - - ds->l_desc.dyn_tree = ds->dyn_ltree; - ds->d_desc.dyn_tree = ds->dyn_dtree; - ds->bl_desc.dyn_tree = ds->bl_tree; - - return Z_OK; -#endif -} -#endif /* 0 */ - /* =========================================================================== * Read a new buffer from the current input stream, update the adler32 * and total number of bytes read. All deflate() input goes through diff --git a/lib/zlib_inflate/inflate.c b/lib/zlib_inflate/inflate.c index f5ce87b0800e..58a733b10387 100644 --- a/lib/zlib_inflate/inflate.c +++ b/lib/zlib_inflate/inflate.c @@ -45,21 +45,6 @@ int zlib_inflateReset(z_streamp strm) return Z_OK; } -#if 0 -int zlib_inflatePrime(z_streamp strm, int bits, int value) -{ - struct inflate_state *state; - - if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR; - state = (struct inflate_state *)strm->state; - if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; - value &= (1L << bits) - 1; - state->hold += value << state->bits; - state->bits += bits; - return Z_OK; -} -#endif - int zlib_inflateInit2(z_streamp strm, int windowBits) { struct inflate_state *state; @@ -761,123 +746,6 @@ int zlib_inflateEnd(z_streamp strm) return Z_OK; } -#if 0 -int zlib_inflateSetDictionary(z_streamp strm, const Byte *dictionary, - uInt dictLength) -{ - struct inflate_state *state; - unsigned long id; - - /* check state */ - if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR; - state = (struct inflate_state *)strm->state; - if (state->wrap != 0 && state->mode != DICT) - return Z_STREAM_ERROR; - - /* check for correct dictionary id */ - if (state->mode == DICT) { - id = zlib_adler32(0L, NULL, 0); - id = zlib_adler32(id, dictionary, dictLength); - if (id != state->check) - return Z_DATA_ERROR; - } - - /* copy dictionary to window */ - zlib_updatewindow(strm, strm->avail_out); - - if (dictLength > state->wsize) { - memcpy(state->window, dictionary + dictLength - state->wsize, - state->wsize); - state->whave = state->wsize; - } - else { - memcpy(state->window + state->wsize - dictLength, dictionary, - dictLength); - state->whave = dictLength; - } - state->havedict = 1; - return Z_OK; -} -#endif - -#if 0 -/* - Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found - or when out of input. When called, *have is the number of pattern bytes - found in order so far, in 0..3. On return *have is updated to the new - state. If on return *have equals four, then the pattern was found and the - return value is how many bytes were read including the last byte of the - pattern. If *have is less than four, then the pattern has not been found - yet and the return value is len. In the latter case, zlib_syncsearch() can be - called again with more data and the *have state. *have is initialized to - zero for the first call. - */ -static unsigned zlib_syncsearch(unsigned *have, unsigned char *buf, - unsigned len) -{ - unsigned got; - unsigned next; - - got = *have; - next = 0; - while (next < len && got < 4) { - if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) - got++; - else if (buf[next]) - got = 0; - else - got = 4 - got; - next++; - } - *have = got; - return next; -} -#endif - -#if 0 -int zlib_inflateSync(z_streamp strm) -{ - unsigned len; /* number of bytes to look at or looked at */ - unsigned long in, out; /* temporary to save total_in and total_out */ - unsigned char buf[4]; /* to restore bit buffer to byte string */ - struct inflate_state *state; - - /* check parameters */ - if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR; - state = (struct inflate_state *)strm->state; - if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; - - /* if first time, start search in bit buffer */ - if (state->mode != SYNC) { - state->mode = SYNC; - state->hold <<= state->bits & 7; - state->bits -= state->bits & 7; - len = 0; - while (state->bits >= 8) { - buf[len++] = (unsigned char)(state->hold); - state->hold >>= 8; - state->bits -= 8; - } - state->have = 0; - zlib_syncsearch(&(state->have), buf, len); - } - - /* search available input */ - len = zlib_syncsearch(&(state->have), strm->next_in, strm->avail_in); - strm->avail_in -= len; - strm->next_in += len; - strm->total_in += len; - - /* return no joy or set up to restart inflate() on a new block */ - if (state->have != 4) return Z_DATA_ERROR; - in = strm->total_in; out = strm->total_out; - zlib_inflateReset(strm); - strm->total_in = in; strm->total_out = out; - state->mode = TYPE; - return Z_OK; -} -#endif - /* * This subroutine adds the data at next_in/avail_in to the output history * without performing any output. The output buffer must be "caught up";