redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'master' into for-next 

Conflicts:
	fs/exofs/inode.c
hifive-unleashed-5.1
Jiri Kosina 2010-08-11 09:36:51 +02:00
parent 4785879e4d 3d30701b58
commit 6396fc3b3f
978 changed files with 39282 additions and 18653 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
View File

@ -7,3 +7,15 @@ Description:
0 -> resumed
(_UDC_ is the name of the USB Device Controller driver)
What: /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
Date: July 2010
Contact: Andy Shevchenko <andy.shevchenko@gmail.com>
Description:
Show or set the reaction on the FUA (Force Unit Access) bit in
the SCSI WRITE(10,12) commands when a gadget in USB Mass
Storage mode.
Possible values are:
1 -> ignore the FUA flag
0 -> obey the FUA flag

2
Documentation/DocBook/Makefile
View File

@ -45,7 +45,7 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
pdfdocs: $(PDF)
HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
htmldocs: $(HTML)
htmldocs: $(HTML) xmldoclinks
$(call build_main_index)
$(call build_images)

16
Documentation/DocBook/v4l/lirc_device_interface.xml
View File

@ -229,6 +229,22 @@ on working with the default settings initially.</para>
and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>LIRC_SET_WIDEBAND_RECEIVER</term>
<listitem>
<para>Some receivers are equipped with special wide band receiver which is intended
to be used to learn output of existing remote.
Calling that ioctl with (1) will enable it, and with (0) disable it.
This might be useful of receivers that have otherwise narrow band receiver
that prevents them to be used with some remotes.
Wide band receiver might also be more precise
On the other hand its disadvantage it usually reduced range of reception.
Note: wide band receiver might be implictly enabled if you enable
carrier reports. In that case it will be disabled as soon as you disable
carrier reports. Trying to disable wide band receiver while carrier
reports are active will do nothing.</para>
</listitem>
</varlistentry>
</variablelist>
</section>

78
Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
View File

@ -240,6 +240,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
<entry>r<subscript>1</subscript></entry>
<entry>r<subscript>0</subscript></entry>
</row>
<row id="V4L2-PIX-FMT-BGR666">
<entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
<entry>'BGRH'</entry>
<entry></entry>
<entry>b<subscript>5</subscript></entry>
<entry>b<subscript>4</subscript></entry>
<entry>b<subscript>3</subscript></entry>
<entry>b<subscript>2</subscript></entry>
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
<entry>g<subscript>5</subscript></entry>
<entry>g<subscript>4</subscript></entry>
<entry></entry>
<entry>g<subscript>3</subscript></entry>
<entry>g<subscript>2</subscript></entry>
<entry>g<subscript>1</subscript></entry>
<entry>g<subscript>0</subscript></entry>
<entry>r<subscript>5</subscript></entry>
<entry>r<subscript>4</subscript></entry>
<entry>r<subscript>3</subscript></entry>
<entry>r<subscript>2</subscript></entry>
<entry></entry>
<entry>r<subscript>1</subscript></entry>
<entry>r<subscript>0</subscript></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
</row>
<row id="V4L2-PIX-FMT-BGR24">
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>
@ -700,6 +739,45 @@ defined in error. Drivers may interpret them as in <xref
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
</row>
<row id="V4L2-PIX-FMT-BGR666">
<entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
<entry>'BGRH'</entry>
<entry></entry>
<entry>b<subscript>5</subscript></entry>
<entry>b<subscript>4</subscript></entry>
<entry>b<subscript>3</subscript></entry>
<entry>b<subscript>2</subscript></entry>
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
<entry>g<subscript>5</subscript></entry>
<entry>g<subscript>4</subscript></entry>
<entry></entry>
<entry>g<subscript>3</subscript></entry>
<entry>g<subscript>2</subscript></entry>
<entry>g<subscript>1</subscript></entry>
<entry>g<subscript>0</subscript></entry>
<entry>r<subscript>5</subscript></entry>
<entry>r<subscript>4</subscript></entry>
<entry>r<subscript>3</subscript></entry>
<entry>r<subscript>2</subscript></entry>
<entry></entry>
<entry>r<subscript>1</subscript></entry>
<entry>r<subscript>0</subscript></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
<entry></entry>
</row>
<row><!-- id="V4L2-PIX-FMT-BGR24" -->
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>

8
Documentation/feature-removal-schedule.txt
View File

@ -360,14 +360,6 @@ When: 2.6.33
Why: Should be implemented in userspace, policy daemon.
Who: Johannes Berg <johannes@sipsolutions.net>
---------------------------
What: CONFIG_INOTIFY
When: 2.6.33
Why: last user (audit) will be converted to the newer more generic
and more easily maintained fsnotify subsystem
Who: Eric Paris <eparis@redhat.com>
----------------------------
What: sound-slot/service-* module aliases and related clutters in

22
Documentation/filesystems/Locking
View File

@ -92,8 +92,8 @@ prototypes:
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
void (*drop_inode) (struct inode *);
void (*delete_inode) (struct inode *);
int (*drop_inode) (struct inode *);
void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
@ -101,14 +101,13 @@ prototypes:
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
void (*clear_inode) (struct inode *);
void (*umount_begin) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
locking rules:
All may block.
All may block [not true, see below]
None have BKL
s_umount
alloc_inode:
@ -116,22 +115,25 @@ destroy_inode:
dirty_inode: (must not sleep)
write_inode:
drop_inode: !!!inode_lock!!!
delete_inode:
evict_inode:
put_super: write
write_super: read
sync_fs: read
freeze_fs: read
unfreeze_fs: read
statfs: no
remount_fs: maybe (see below)
clear_inode:
statfs: maybe(read) (see below)
remount_fs: write
umount_begin: no
show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
->remount_fs() will have the s_umount exclusive lock if it's already mounted.
When called from get_sb_single, it does NOT have the s_umount lock.
->statfs() has s_umount (shared) when called by ustat(2) (native or
compat), but that's an accident of bad API; s_umount is used to pin
the superblock down when we only have dev_t given us by userland to
identify the superblock. Everything else (statfs(), fstatfs(), etc.)
doesn't hold it when calling ->statfs() - superblock is pinned down
by resolving the pathname passed to syscall.
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via
dqio_sem) (unless an admin really wants to screw up something and

45
Documentation/filesystems/porting
View File

@ -273,3 +273,48 @@ it's safe to remove it. If you don't need it, remove it.
deliberate; as soon as struct block_device * is propagated in a reasonable
way by that code fixing will become trivial; until then nothing can be
done.
[mandatory]
block truncatation on error exit from ->write_begin, and ->direct_IO
moved from generic methods (block_write_begin, cont_write_begin,
nobh_write_begin, blockdev_direct_IO*) to callers. Take a look at
ext2_write_failed and callers for an example.
[mandatory]
->truncate is going away. The whole truncate sequence needs to be
implemented in ->setattr, which is now mandatory for filesystems
implementing on-disk size changes. Start with a copy of the old inode_setattr
and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to
be in order of zeroing blocks using block_truncate_page or similar helpers,
size update and on finally on-disk truncation which should not fail.
inode_change_ok now includes the size checks for ATTR_SIZE and must be called
in the beginning of ->setattr unconditionally.
[mandatory]
->clear_inode() and ->delete_inode() are gone; ->evict_inode() should
be used instead. It gets called whenever the inode is evicted, whether it has
remaining links or not. Caller does *not* evict the pagecache or inode-associated
metadata buffers; getting rid of those is responsibility of method, as it had
been for ->delete_inode().
->drop_inode() returns int now; it's called on final iput() with inode_lock
held and it returns true if filesystems wants the inode to be dropped. As before,
generic_drop_inode() is still the default and it's been updated appropriately.
generic_delete_inode() is also alive and it consists simply of return 1. Note that
all actual eviction work is done by caller after ->drop_inode() returns.
clear_inode() is gone; use end_writeback() instead. As before, it must
be called exactly once on each call of ->evict_inode() (as it used to be for
each call of ->delete_inode()). Unlike before, if you are using inode-associated
metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to
call invalidate_inode_buffers() before end_writeback().
No async writeback (and thus no calls of ->write_inode()) will happen
after end_writeback() returns, so actions that should not overlap with ->write_inode()
(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call.
NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out
if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput()
may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly
free the on-disk inode, you may end up doing that while ->write_inode() is writing
to it.

3
Documentation/kernel-parameters.txt
View File

@ -681,8 +681,11 @@ and is between 256 and 4096 characters. It is defined in the file
earlycon= [KNL] Output early console device and options.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
uart[8250],mmio32,<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
MMIO inter-register address stride is either 8bit (mmio)
or 32bit (mmio32).
The options are the same as for ttyS, above.
earlyprintk= [X86,SH,BLACKFIN]

2
Documentation/usb/ehci.txt
View File

@ -9,7 +9,7 @@ compatible with the USB 1.1 standard. It defines three transfer speeds:
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"

150
Documentation/usb/gadget_multi.txt 100644
View File

@ -0,0 +1,150 @@
-*- org -*-
* Overview
The Multifunction Composite Gadget (or g_multi) is a composite gadget
that makes extensive use of the composite framework to provide
a... multifunction gadget.
In it's standard configuration it provides a single USB configuration
with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and
USB Mass Storage functions.
A CDC ECM (Ethernet) function may be turned on via a Kconfig option
and RNDIS can be turned off. If they are both enabled the gadget will
have two configurations -- one with RNDIS and another with CDC ECM[3].
Please not that if you use non-standard configuration (that is enable
CDC ECM) you may need to change vendor and/or product ID.
* Host drivers
To make use of the gadget one needs to make it work on host side --
without that there's no hope of achieving anything with the gadget.
As one might expect, things one need to do very from system to system.
** Linux host drivers
Since the gadget uses standard composite framework and appears as such
to Linux host it does not need any additional drivers on Linux host
side. All the functions are handled by respective drivers developed
for them.
This is also true for two configuration set-up with RNDIS
configuration being the first one. Linux host will use the second
configuration with CDC ECM which should work better under Linux.
** Windows host drivers
For the gadget two work under Windows two conditions have to be met:
*** Detecting as composite gadget
First of all, Windows need to detect the gadget as an USB composite
gadget which on its own have some conditions[4]. If they are met,
Windows lets USB Generic Parent Driver[5] handle the device which then
tries to much drivers for each individual interface (sort of, don't
get into too many details).
The good news is: you do not have to worry about most of the
conditions!
The only thing to worry is that the gadget has to have a single
configuration so a dual RNDIS and CDC ECM gadget won't work unless you
create a proper INF -- and of course, if you do submit it!
*** Installing drivers for each function
The other, trickier thing is making Windows install drivers for each
individual function.
For mass storage it is trivial since Windows detect it's an interface
implementing USB Mass Storage class and selects appropriate driver.
Things are harder with RDNIS and CDC ACM.
**** RNDIS
To make Windows select RNDIS drivers for the first function in the
gadget, one needs to use the [[file:linux.inf]] file provided with this
document. It "attaches" Window's RNDIS driver to the first interface
of the gadget.
Please note, that while testing we encountered some issues[6] when
RNDIS was not the first interface. You do not need to worry abut it
unless you are trying to develop your own gadget in which case watch
out for this bug.
**** CDC ACM
Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM.
**** Customising the gadget
If you intend to hack the g_multi gadget be advised that rearranging
functions will obviously change interface numbers for each of the
functionality. As an effect provided INFs won't work since they have
interface numbers hard-coded in them (it's not hard to change those
though[7]).
This also means, that after experimenting with g_multi and changing
provided functions one should change gadget's vendor and/or product ID
so there will be no collision with other customised gadgets or the
original gadget.
Failing to comply may cause brain damage after wondering for hours why
things don't work as intended before realising Windows have cached
some drivers information (changing USB port may sometimes help plus
you might try using USBDeview[8] to remove the phantom device).
**** INF testing
Provided INF files have been tested on Windows XP SP3, Windows Vista
and Windows 7, all 32-bit versions. It should work on 64-bit versions
as well. It most likely won't work on Windows prior to Windows XP
SP2.
** Other systems
At this moment, drivers for any other systems have not been tested.
Knowing how MacOS is based on BSD and BSD is an Open Source it is
believed that it should (read: "I have no idea whether it will") work
out-of-the-box.
For more exotic systems I have even less to say...
Any testing and drivers *are* *welcome*!
* Authors
This document has been written by Michal Nazarewicz
([[mailto:mina86@mina86.com]]). INF files have been hacked with
support of Marek Szyprowski ([[mailto:m.szyprowski@samsung.com]]) and
Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS
template[9], Microchip's CDC ACM INF file and David Brownell's
([[mailto:dbrownell@users.sourceforge.net]]) original INF files.
* Footnotes
[1] Remote Network Driver Interface Specification,
[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
[2] Communications Device Class Abstract Control Model, spec for this
and other USB classes can be found at
[[http://www.usb.org/developers/devclass_docs/]].
[3] CDC Ethernet Control Model.
[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
[6] To put it in some other nice words, Windows failed to respond to
any user input.
[7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]]
useful.
[8] http://www.nirsoft.net/utils/usb_devices_view.html
[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]]

87
Documentation/usb/gadget_serial.txt
View File

@ -151,88 +151,23 @@ instructions below to install the host side driver.
Installing the Windows Host ACM Driver
--------------------------------------
To use the Windows ACM driver you must have the files "gserial.inf"
and "usbser.sys" together in a folder on the Windows machine.
The "gserial.inf" file is given here.
-------------------- CUT HERE --------------------
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%LINUX%
DriverVer=08/17/2004,0.0.2.0
; Copyright (C) 2004 Al Borchers (alborchers@steinerpoint.com)
[Manufacturer]
%LINUX%=GSerialDeviceList
[GSerialDeviceList]
%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
[DestinationDirs]
DefaultDestDir=10,System32\Drivers
[GSerialInstall]
CopyFiles=GSerialCopyFiles
AddReg=GSerialAddReg
[GSerialCopyFiles]
usbser.sys
[GSerialAddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[GSerialInstall.Services]
AddService = usbser,0x0002,GSerialService
[GSerialService]
DisplayName = %GSERIAL_DISPLAY_NAME%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\usbser.sys
LoadOrderGroup = Base
[Strings]
LINUX = "Linux"
GSERIAL = "Gadget Serial"
GSERIAL_DISPLAY_NAME = "USB Gadget Serial Driver"
-------------------- CUT HERE --------------------
The "usbser.sys" file comes with various versions of Windows.
For example, it can be found on Windows XP typically in
C:\WINDOWS\Driver Cache\i386\driver.cab
Or it can be found on the Windows 98SE CD in the "win98" folder
in the "DRIVER11.CAB" through "DRIVER20.CAB" cab files. You will
need the DOS "expand" program, the Cygwin "cabextract" program, or
a similar program to unpack these cab files and extract "usbser.sys".
For example, to extract "usbser.sys" into the current directory
on Windows XP, open a DOS window and run a command like
expand C:\WINDOWS\Driver~1\i386\driver.cab -F:usbser.sys .
(Thanks to Nishant Kamat for pointing out this DOS command.)
To use the Windows ACM driver you must have the "linux-cdc-acm.inf"
file (provided along this document) which supports all recent versions
of Windows.
When the gadget serial driver is loaded and the USB device connected
to the Windows host with a USB cable, Windows should recognize the
gadget serial device and ask for a driver. Tell Windows to find the
driver in the folder that contains "gserial.inf" and "usbser.sys".
driver in the folder that contains the "linux-cdc-acm.inf" file.
For example, on Windows XP, when the gadget serial device is first
plugged in, the "Found New Hardware Wizard" starts up. Select
"Install from a list or specific location (Advanced)", then on
the next screen select "Include this location in the search" and
enter the path or browse to the folder containing "gserial.inf" and
"usbser.sys". Windows will complain that the Gadget Serial driver
has not passed Windows Logo testing, but select "Continue anyway"
and finish the driver installation.
"Install from a list or specific location (Advanced)", then on the
next screen select "Include this location in the search" and enter the
path or browse to the folder containing the "linux-cdc-acm.inf" file.
Windows will complain that the Gadget Serial driver has not passed
Windows Logo testing, but select "Continue anyway" and finish the
driver installation.
On Windows XP, in the "Device Manager" (under "Control Panel",
"System", "Hardware") expand the "Ports (COM & LPT)" entry and you
@ -345,5 +280,3 @@ you should be able to send data back and forth between the gadget
side and host side systems. Anything you type on the terminal
window on the gadget side should appear in the terminal window on
the host side and vice versa.

4
Documentation/usb/hotplug.txt
View File

@ -10,7 +10,7 @@ immediately usable. That means the system must do many things, including:
- Bind a driver to that device. Bus frameworks do that using a
device driver's probe() routine.
- Tell other subsystems to configure the new device. Print
queues may need to be enabled, networks brought up, disk
partitions mounted, and so on. In some cases these will
@ -84,7 +84,7 @@ USB MODUTILS SUPPORT
Current versions of module-init-tools will create a "modules.usbmap" file
which contains the entries from each driver's MODULE_DEVICE_TABLE. Such
files can be used by various user mode policy agents to make sure all the
right driver modules get loaded, either at boot time or later.
right driver modules get loaded, either at boot time or later.
See <linux/usb.h> for full information about such table entries; or look
at existing drivers. Each table entry describes one or more criteria to

107
Documentation/usb/linux-cdc-acm.inf 100644
View File

@ -0,0 +1,107 @@
; Windows USB CDC ACM Setup File
; Based on INF template which was:
; Copyright (c) 2000 Microsoft Corporation
; Copyright (c) 2007 Microchip Technology Inc.
; likely to be covered by the MLPL as found at:
; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
; For use only on Windows operating systems.
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Linux%
DriverVer=11/15/2007,5.1.2600.0
[Manufacturer]
%Linux%=DeviceList, NTamd64
[DestinationDirs]
DefaultDestDir=12
;------------------------------------------------------------------------------
; Windows 2000/XP/Vista-32bit Sections
;------------------------------------------------------------------------------
[DriverInstall.nt]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.nt
AddReg=DriverInstall.nt.AddReg
[DriverCopyFiles.nt]
usbser.sys,,,0x20
[DriverInstall.nt.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,USBSER.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.nt.Services]
AddService=usbser, 0x00000002, DriverService.nt
[DriverService.nt]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\USBSER.sys
;------------------------------------------------------------------------------
; Vista-64bit Sections
;------------------------------------------------------------------------------
[DriverInstall.NTamd64]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.NTamd64
AddReg=DriverInstall.NTamd64.AddReg
[DriverCopyFiles.NTamd64]
USBSER.sys,,,0x20
[DriverInstall.NTamd64.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,USBSER.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.NTamd64.Services]
AddService=usbser, 0x00000002, DriverService.NTamd64
[DriverService.NTamd64]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\USBSER.sys
;------------------------------------------------------------------------------
; Vendor and Product ID Definitions
;------------------------------------------------------------------------------
; When developing your USB device, the VID and PID used in the PC side
; application program and the firmware on the microcontroller must match.
; Modify the below line to use your VID and PID. Use the format as shown
; below.
; Note: One INF file can be used for multiple devices with different
; VID and PIDs. For each supported device, append
; ",USB\VID_xxxx&PID_yyyy" to the end of the line.
;------------------------------------------------------------------------------
[SourceDisksFiles]
[SourceDisksNames]
[DeviceList]
%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
[DeviceList.NTamd64]
%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------
;Modify these strings to customize your device
;------------------------------------------------------------------------------
[Strings]
Linux = "Linux Developer Community"
DESCRIPTION = "Gadget Serial"
SERVICE = "USB RS-232 Emulation Driver"

222
Documentation/usb/linux.inf
View File

@ -1,200 +1,66 @@
; MS-Windows driver config matching some basic modes of the
; Linux-USB Ethernet/RNDIS gadget firmware:
;
; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
; cable modem profile, and supports most non-Microsoft USB hosts
;
; - RNDIS plus CDC Subset ... used by hardware that incapable of
; full CDC Ethernet support.
;
; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
; http://www.microsoft.com/whdc/device/network/ndis/rmndis.mspx
; Based on template INF file found at
; <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
; which was:
; Copyright (c) Microsoft Corporation
; and released under the MLPL as found at:
; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
; For use only on Windows operating systems.
[Version]
Signature = "$CHICAGO$"
Signature = "$Windows NT$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Linux%
Compatible = 1
MillenniumPreferred = .ME
DriverVer = 03/30/2004,0.0.0.0
; catalog file would be used by WHQL
;CatalogFile = Linux.cat
DriverVer = 06/21/2006,6.0.6000.16384
[Manufacturer]
%Linux% = LinuxDevices,NT.5.1
%Linux% = LinuxDevices,NTx86,NTamd64,NTia64
[LinuxDevices]
; NetChip IDs, used by both firmware modes
%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4a2
; Decoration for x86 architecture
[LinuxDevices.NTx86]
%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
[LinuxDevices.NT.5.1]
%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
; Decoration for x64 architecture
[LinuxDevices.NTamd64]
%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
; Decoration for ia64 architecture
[LinuxDevices.NTia64]
%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
;@@@ This is the common setting for setup
[ControlFlags]
ExcludeFromSelect=*
; Windows 98, Windows 98 Second Edition specific sections --------
[RNDIS]
DeviceID = usb8023
MaxInstance = 512
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
[RNDIS_AddReg_98]
HKR, , DevLoader, 0, *ndis
HKR, , DeviceVxDs, 0, usb8023.sys
HKR, NDIS, LogDriverName, 0, "usb8023"
HKR, NDIS, MajorNdisVersion, 1, 5
HKR, NDIS, MinorNdisVersion, 1, 0
HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
[RNDIS_Install_98]
CopyFiles=RNDIS_CopyFiles_98
[RNDIS_CopyFiles_98]
usb8023.sys, usb8023w.sys, , 0
rndismp.sys, rndismpw.sys, , 0
; Windows Millennium Edition specific sections --------------------
[RNDIS.ME]
DeviceID = usb8023
MaxInstance = 512
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
BusType = 15
[RNDIS_AddReg_ME]
HKR, , DevLoader, 0, *ndis
HKR, , DeviceVxDs, 0, usb8023.sys
HKR, NDIS, LogDriverName, 0, "usb8023"
HKR, NDIS, MajorNdisVersion, 1, 5
HKR, NDIS, MinorNdisVersion, 1, 0
HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
[RNDIS_Install_ME]
CopyFiles=RNDIS_CopyFiles_ME
[RNDIS_CopyFiles_ME]
usb8023.sys, usb8023m.sys, , 0
rndismp.sys, rndismpm.sys, , 0
; Windows 2000 specific sections ---------------------------------
[RNDIS.NT]
Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
BusType = 15
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
CopyFiles = RNDIS_CopyFiles_NT
[RNDIS.NT.Services]
AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
[RNDIS_CopyFiles_NT]
; no rename of files on Windows 2000, use the 'k' names as is
usb8023k.sys, , , 0
rndismpk.sys, , , 0
[RNDIS_ServiceInst_NT]
DisplayName = %ServiceDisplayName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\usb8023k.sys
LoadOrderGroup = NDIS
AddReg = RNDIS_WMI_AddReg_NT
[RNDIS_WMI_AddReg_NT]
HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
; Windows XP specific sections -----------------------------------
; DDInstall section
; References the in-build Netrndis.inf
[RNDIS.NT.5.1]
Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
BusType = 15
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
; no copyfiles - the files are already in place
Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
BusType = 15
; NEVER REMOVE THE FOLLOWING REFERENCE FOR NETRNDIS.INF
include = netrndis.inf
needs = Usb_Rndis.ndi
AddReg = Rndis_AddReg_Vista
; DDInstal.Services section
[RNDIS.NT.5.1.Services]
AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
include = netrndis.inf
needs = Usb_Rndis.ndi.Services
[RNDIS_ServiceInst_51]
DisplayName = %ServiceDisplayName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\usb8023.sys
LoadOrderGroup = NDIS
AddReg = RNDIS_WMI_AddReg_51
; Optional registry settings. You can modify as needed.
[RNDIS_AddReg_Vista]
HKR, NDI\params\VistaProperty, ParamDesc, 0, %Vista_Property%
HKR, NDI\params\VistaProperty, type, 0, "edit"
HKR, NDI\params\VistaProperty, LimitText, 0, "12"
HKR, NDI\params\VistaProperty, UpperCase, 0, "1"
HKR, NDI\params\VistaProperty, default, 0, " "
HKR, NDI\params\VistaProperty, optional, 0, "1"
[RNDIS_WMI_AddReg_51]
HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
; Windows 2000 and Windows XP common sections --------------------
[RNDIS_AddReg_NT]
HKR, Ndi, Service, 0, "USB_RNDIS"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
[RNDIS_EventLog]
AddReg = RNDIS_EventLog_AddReg
[RNDIS_EventLog_AddReg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
; Common Sections -------------------------------------------------
[RNDIS_AddReg_Common]
HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
HKR, NDI\params\NetworkAddress, type, 0, "edit"
HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
HKR, NDI\params\NetworkAddress, default, 0, " "
HKR, NDI\params\NetworkAddress, optional, 0, "1"
[SourceDisksNames]
1=%SourceDisk%,,1
[SourceDisksFiles]
usb8023m.sys=1
rndismpm.sys=1
usb8023w.sys=1
rndismpw.sys=1
usb8023k.sys=1
rndismpk.sys=1
[DestinationDirs]
RNDIS_CopyFiles_98 = 10, system32/drivers
RNDIS_CopyFiles_ME = 10, system32/drivers
RNDIS_CopyFiles_NT = 12
; No sys copyfiles - the sys files are already in-build
; (part of the operating system).
; We do not support XP SP1-, 2003 SP1-, ME, 9x.
[Strings]
ServiceDisplayName = "USB Remote NDIS Network Device Driver"
NetworkAddress = "Network Address"
Linux = "Linux Developer Community"
LinuxDevice = "Linux USB Ethernet/RNDIS Gadget"
SourceDisk = "Ethernet/RNDIS Gadget Driver Install Disk"
Vista_Property = "Optional Vista Property"

648
Documentation/video4linux/v4l2-controls.txt 100644
View File

@ -0,0 +1,648 @@
Introduction
============
The V4L2 control API seems simple enough, but quickly becomes very hard to
implement correctly in drivers. But much of the code needed to handle controls
is actually not driver specific and can be moved to the V4L core framework.
After all, the only part that a driver developer is interested in is:
1) How do I add a control?
2) How do I set the control's value? (i.e. s_ctrl)
And occasionally:
3) How do I get the control's value? (i.e. g_volatile_ctrl)
4) How do I validate the user's proposed control value? (i.e. try_ctrl)
All the rest is something that can be done centrally.
The control framework was created in order to implement all the rules of the
V4L2 specification with respect to controls in a central place. And to make
life as easy as possible for the driver developer.
Note that the control framework relies on the presence of a struct v4l2_device
for V4L2 drivers and struct v4l2_subdev for sub-device drivers.
Objects in the framework
========================
There are two main objects:
The v4l2_ctrl object describes the control properties and keeps track of the
control's value (both the current value and the proposed new value).
v4l2_ctrl_handler is the object that keeps track of controls. It maintains a
list of v4l2_ctrl objects that it owns and another list of references to
controls, possibly to controls owned by other handlers.
Basic usage for V4L2 and sub-device drivers
===========================================
1) Prepare the driver:
1.1) Add the handler to your driver's top-level struct:
struct foo_dev {
...
struct v4l2_ctrl_handler ctrl_handler;
...
};
struct foo_dev *foo;
1.2) Initialize the handler:
v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
The second argument is a hint telling the function how many controls this
handler is expected to handle. It will allocate a hashtable based on this
information. It is a hint only.
1.3) Hook the control handler into the driver:
1.3.1) For V4L2 drivers do this:
struct foo_dev {
...
struct v4l2_device v4l2_dev;
...
struct v4l2_ctrl_handler ctrl_handler;
...
};
foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
Where foo->v4l2_dev is of type struct v4l2_device.
Finally, remove all control functions from your v4l2_ioctl_ops:
vidioc_queryctrl, vidioc_querymenu, vidioc_g_ctrl, vidioc_s_ctrl,
vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls.
Those are now no longer needed.
1.3.2) For sub-device drivers do this:
struct foo_dev {
...
struct v4l2_subdev sd;
...
struct v4l2_ctrl_handler ctrl_handler;
...
};
foo->sd.ctrl_handler = &foo->ctrl_handler;
Where foo->sd is of type struct v4l2_subdev.
And set all core control ops in your struct v4l2_subdev_core_ops to these
helpers:
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
.g_ctrl = v4l2_subdev_g_ctrl,
.s_ctrl = v4l2_subdev_s_ctrl,
.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
Note: this is a temporary solution only. Once all V4L2 drivers that depend
on subdev drivers are converted to the control framework these helpers will
no longer be needed.
1.4) Clean up the handler at the end:
v4l2_ctrl_handler_free(&foo->ctrl_handler);
2) Add controls:
You add non-menu controls by calling v4l2_ctrl_new_std:
struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
const struct v4l2_ctrl_ops *ops,
u32 id, s32 min, s32 max, u32 step, s32 def);
Menu controls are added by calling v4l2_ctrl_new_std_menu:
struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
const struct v4l2_ctrl_ops *ops,
u32 id, s32 max, s32 skip_mask, s32 def);
These functions are typically called right after the v4l2_ctrl_handler_init:
v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
V4L2_CID_CONTRAST, 0, 255, 1, 128);
v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
V4L2_CID_POWER_LINE_FREQUENCY,
V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
...
if (foo->ctrl_handler.error) {
int err = foo->ctrl_handler.error;
v4l2_ctrl_handler_free(&foo->ctrl_handler);
return err;
}
The v4l2_ctrl_new_std function returns the v4l2_ctrl pointer to the new
control, but if you do not need to access the pointer outside the control ops,
then there is no need to store it.
The v4l2_ctrl_new_std function will fill in most fields based on the control
ID except for the min, max, step and default values. These are passed in the
last four arguments. These values are driver specific while control attributes
like type, name, flags are all global. The control's current value will be set
to the default value.
The v4l2_ctrl_new_std_menu function is very similar but it is used for menu
controls. There is no min argument since that is always 0 for menu controls,
and instead of a step there is a skip_mask argument: if bit X is 1, then menu
item X is skipped.
Note that if something fails, the function will return NULL or an error and
set ctrl_handler->error to the error code. If ctrl_handler->error was already
set, then it will just return and do nothing. This is also true for
v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
This makes it easy to init the handler and just add all controls and only check
the error code at the end. Saves a lot of repetitive error checking.
It is recommended to add controls in ascending control ID order: it will be
a bit faster that way.
3) Optionally force initial control setup:
v4l2_ctrl_handler_setup(&foo->ctrl_handler);
This will call s_ctrl for all controls unconditionally. Effectively this
initializes the hardware to the default control values. It is recommended
that you do this as this ensures that both the internal data structures and
the hardware are in sync.
4) Finally: implement the v4l2_ctrl_ops
static const struct v4l2_ctrl_ops foo_ctrl_ops = {
.s_ctrl = foo_s_ctrl,
};
Usually all you need is s_ctrl:
static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
write_reg(0x123, ctrl->val);
break;
case V4L2_CID_CONTRAST:
write_reg(0x456, ctrl->val);
break;
}
return 0;
}
The control ops are called with the v4l2_ctrl pointer as argument.
The new control value has already been validated, so all you need to do is
to actually update the hardware registers.
You're done! And this is sufficient for most of the drivers we have. No need
to do any validation of control values, or implement QUERYCTRL/QUERYMENU. And
G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
==============================================================================
The remainder of this document deals with more advanced topics and scenarios.
In practice the basic usage as described above is sufficient for most drivers.
===============================================================================
Inheriting Controls
===================
When a sub-device is registered with a V4L2 driver by calling
v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
and v4l2_device are set, then the controls of the subdev will become
automatically available in the V4L2 driver as well. If the subdev driver
contains controls that already exist in the V4L2 driver, then those will be
skipped (so a V4L2 driver can always override a subdev control).
What happens here is that v4l2_device_register_subdev() calls
v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
of v4l2_device.
Accessing Control Values
========================
The v4l2_ctrl struct contains these two unions:
/* The current control value. */
union {
s32 val;
s64 val64;
char *string;
} cur;
/* The new control value. */
union {
s32 val;
s64 val64;
char *string;
};
Within the control ops you can freely use these. The val and val64 speak for
themselves. The string pointers point to character buffers of length
ctrl->maximum + 1, and are always 0-terminated.
In most cases 'cur' contains the current cached control value. When you create
a new control this value is made identical to the default value. After calling
v4l2_ctrl_handler_setup() this value is passed to the hardware. It is generally
a good idea to call this function.
Whenever a new value is set that new value is automatically cached. This means
that most drivers do not need to implement the g_volatile_ctrl() op. The
exception is for controls that return a volatile register such as a signal
strength read-out that changes continuously. In that case you will need to
implement g_volatile_ctrl like this:
static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ctrl->cur.val = read_reg(0x123);
break;
}
}
The 'new value' union is not used in g_volatile_ctrl. In general controls
that need to implement g_volatile_ctrl are read-only controls.
To mark a control as volatile you have to set the is_volatile flag:
ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
if (ctrl)
ctrl->is_volatile = 1;
For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
contains the current value, which you can use (but not change!) as well.
If s_ctrl returns 0 (OK), then the control framework will copy the new final
values to the 'cur' union.
While in g_volatile/s/try_ctrl you can access the value of all controls owned
by the same handler since the handler's lock is held. If you need to access
the value of controls owned by other handlers, then you have to be very careful
not to introduce deadlocks.
Outside of the control ops you have to go through to helper functions to get
or set a single control value safely in your driver:
s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
will result in a deadlock since these helpers lock the handler as well.
You can also take the handler lock yourself:
mutex_lock(&state->ctrl_handler.lock);
printk(KERN_INFO "String value is '%s'\n", ctrl1->cur.string);
printk(KERN_INFO "Integer value is '%s'\n", ctrl2->cur.val);
mutex_unlock(&state->ctrl_handler.lock);
Menu Controls
=============
The v4l2_ctrl struct contains this union:
union {
u32 step;
u32 menu_skip_mask;
};
For menu controls menu_skip_mask is used. What it does is that it allows you
to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
implementation where you can return -EINVAL if a certain menu item is not
present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
menu controls.
A good example is the MPEG Audio Layer II Bitrate menu control where the
menu is a list of standardized possible bitrates. But in practice hardware
implementations will only support a subset of those. By setting the skip
mask you can tell the framework which menu items should be skipped. Setting
it to 0 means that all menu items are supported.
You set this mask either through the v4l2_ctrl_config struct for a custom
control, or by calling v4l2_ctrl_new_std_menu().
Custom Controls
===============
Driver specific controls can be created using v4l2_ctrl_new_custom():
static const struct v4l2_ctrl_config ctrl_filter = {
.ops = &ctrl_custom_ops,
.id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
.name = "Spatial Filter",
.type = V4L2_CTRL_TYPE_INTEGER,
.flags = V4L2_CTRL_FLAG_SLIDER,
.max = 15,
.step = 1,
};
ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
The last argument is the priv pointer which can be set to driver-specific
private data.
The v4l2_ctrl_config struct also has fields to set the is_private and is_volatile
flags.
If the name field is not set, then the framework will assume this is a standard
control and will fill in the name, type and flags fields accordingly.
Active and Grabbed Controls
===========================
If you get more complex relationships between controls, then you may have to
activate and deactivate controls. For example, if the Chroma AGC control is
on, then the Chroma Gain control is inactive. That is, you may set it, but
the value will not be used by the hardware as long as the automatic gain
control is on. Typically user interfaces can disable such input fields.
You can set the 'active' status using v4l2_ctrl_activate(). By default all
controls are active. Note that the framework does not check for this flag.
It is meant purely for GUIs. The function is typically called from within
s_ctrl.
The other flag is the 'grabbed' flag. A grabbed control means that you cannot
change it because it is in use by some resource. Typical examples are MPEG
bitrate controls that cannot be changed while capturing is in progress.
If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
will return -EBUSY if an attempt is made to set this control. The
v4l2_ctrl_grab() function is typically called from the driver when it
starts or stops streaming.
Control Clusters
================
By default all controls are independent from the others. But in more
complex scenarios you can get dependencies from one control to another.
In that case you need to 'cluster' them:
struct foo {
struct v4l2_ctrl_handler ctrl_handler;
#define AUDIO_CL_VOLUME (0)
#define AUDIO_CL_MUTE (1)
struct v4l2_ctrl *audio_cluster[2];
...
};
state->audio_cluster[AUDIO_CL_VOLUME] =
v4l2_ctrl_new_std(&state->ctrl_handler, ...);
state->audio_cluster[AUDIO_CL_MUTE] =
v4l2_ctrl_new_std(&state->ctrl_handler, ...);
v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
From now on whenever one or more of the controls belonging to the same
cluster is set (or 'gotten', or 'tried'), only the control ops of the first
control ('volume' in this example) is called. You effectively create a new
composite control. Similar to how a 'struct' works in C.
So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
all two controls belonging to the audio_cluster:
static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
switch (ctrl->id) {
case V4L2_CID_AUDIO_VOLUME: {
struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
write_reg(0x123, mute->val ? 0 : ctrl->val);
break;
}
case V4L2_CID_CONTRAST:
write_reg(0x456, ctrl->val);
break;
}
return 0;
}
In the example above the following are equivalent for the VOLUME case:
ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
Note that controls in a cluster may be NULL. For example, if for some
reason mute was never added (because the hardware doesn't support that
particular feature), then mute will be NULL. So in that case we have a
cluster of 2 controls, of which only 1 is actually instantiated. The
only restriction is that the first control of the cluster must always be
present, since that is the 'master' control of the cluster. The master
control is the one that identifies the cluster and that provides the
pointer to the v4l2_ctrl_ops struct that is used for that cluster.
Obviously, all controls in the cluster array must be initialized to either
a valid control or to NULL.
VIDIOC_LOG_STATUS Support
=========================
This ioctl allow you to dump the current status of a driver to the kernel log.
The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
value of the controls owned by the given handler to the log. You can supply a
prefix as well. If the prefix didn't end with a space, then ': ' will be added
for you.
Different Handlers for Different Video Nodes
============================================
Usually the V4L2 driver has just one control handler that is global for
all video nodes. But you can also specify different control handlers for
different video nodes. You can do that by manually setting the ctrl_handler
field of struct video_device.
That is no problem if there are no subdevs involved but if there are, then
you need to block the automatic merging of subdev controls to the global
control handler. You do that by simply setting the ctrl_handler field in
struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
merge subdev controls.
After each subdev was added, you will then have to call v4l2_ctrl_add_handler
manually to add the subdev's control handler (sd->ctrl_handler) to the desired
control handler. This control handler may be specific to the video_device or
for a subset of video_device's. For example: the radio device nodes only have
audio controls, while the video and vbi device nodes share the same control
handler for the audio and video controls.
If you want to have one handler (e.g. for a radio device node) have a subset
of another handler (e.g. for a video device node), then you should first add
the controls to the first handler, add the other controls to the second
handler and finally add the first handler to the second. For example:
v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler);
Or you can add specific controls to a handler:
volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
v4l2_ctrl_add_ctrl(&radio_ctrl_handler, volume);
What you should not do is make two identical controls for two handlers.
For example:
v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
This would be bad since muting the radio would not change the video mute
control. The rule is to have one control for each hardware 'knob' that you
can twiddle.
Finding Controls
================
Normally you have created the controls yourself and you can store the struct
v4l2_ctrl pointer into your own struct.
But sometimes you need to find a control from another handler that you do
not own. For example, if you have to find a volume control from a subdev.
You can do that by calling v4l2_ctrl_find:
struct v4l2_ctrl *volume;
volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
Since v4l2_ctrl_find will lock the handler you have to be careful where you
use it. For example, this is not a good idea:
struct v4l2_ctrl_handler ctrl_handler;
v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
...and in video_ops.s_ctrl:
case V4L2_CID_BRIGHTNESS:
contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
...
When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
attempting to find another control from the same handler will deadlock.
It is recommended not to use this function from inside the control ops.
Inheriting Controls
===================
When one control handler is added to another using v4l2_ctrl_add_handler, then
by default all controls from one are merged to the other. But a subdev might
have low-level controls that make sense for some advanced embedded system, but
not when it is used in consumer-level hardware. In that case you want to keep
those low-level controls local to the subdev. You can do this by simply
setting the 'is_private' flag of the control to 1:
static const struct v4l2_ctrl_config ctrl_private = {
.ops = &ctrl_custom_ops,
.id = V4L2_CID_...,
.name = "Some Private Control",
.type = V4L2_CTRL_TYPE_INTEGER,
.max = 15,
.step = 1,
.is_private = 1,
};
ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
These controls will now be skipped when v4l2_ctrl_add_handler is called.
V4L2_CTRL_TYPE_CTRL_CLASS Controls
==================================
Controls of this type can be used by GUIs to get the name of the control class.
A fully featured GUI can make a dialog with multiple tabs with each tab
containing the controls belonging to a particular control class. The name of
each tab can be found by querying a special control with ID <control class | 1>.
Drivers do not have to care about this. The framework will automatically add
a control of this type whenever the first control belonging to a new control
class is added.
Differences from the Spec
=========================
There are a few places where the framework acts slightly differently from the
V4L2 Specification. Those differences are described in this section. We will
have to see whether we need to adjust the spec or not.
1) It is no longer required to have all controls contained in a
v4l2_ext_control array be from the same control class. The framework will be
able to handle any type of control in the array. You need to set ctrl_class
to 0 in order to enable this. If ctrl_class is non-zero, then it will still
check that all controls belong to that control class.
If you set ctrl_class to 0 and count to 0, then it will only return an error
if there are no controls at all.
2) Clarified the way error_idx works. For get and set it will be equal to
count if nothing was done yet. If it is less than count then only the controls
up to error_idx-1 were successfully applied.
3) When attempting to read a button control the framework will return -EACCES
instead of -EINVAL as stated in the spec. It seems to make more sense since
button controls are write-only controls.
4) Attempting to write to a read-only control will return -EACCES instead of
-EINVAL as the spec says.
5) The spec does not mention what should happen when you try to set/get a
control class controls. ivtv currently returns -EINVAL (indicating that the
control ID does not exist) while the framework will return -EACCES, which
makes more sense.
Proposals for Extensions
========================
Some ideas for future extensions to the spec:
1) Add a V4L2_CTRL_FLAG_HEX to have values shown as hexadecimal instead of
decimal. Useful for e.g. video_mute_yuv.
2) It is possible to mark in the controls array which controls have been
successfully written and which failed by for example adding a bit to the
control ID. Not sure if it is worth the effort, though.
3) Trying to set volatile inactive controls should result in -EACCESS.
4) Add a new flag to mark volatile controls. Any application that wants
to store the state of the controls can then skip volatile inactive controls.
Currently it is not possible to detect such controls.

6
MAINTAINERS
View File

@ -2203,6 +2203,12 @@ F: drivers/misc/cb710/
F: drivers/mmc/host/cb710-mmc.*
F: include/linux/cb710.h
ENE KB2426 (ENE0100/ENE020XX) INFRARED RECEIVER
M: Maxim Levitsky <maximlevitsky@gmail.com>
S: Maintained
F: drivers/media/IR/ene_ir.c
F: drivers/media/IR/ene_ir.h
EPSON 1355 FRAMEBUFFER DRIVER
M: Christopher Hoover <ch@murgatroid.com>
M: Christopher Hoover <ch@hpl.hp.com>

4
arch/alpha/include/asm/ioctls.h
View File

@ -80,6 +80,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
# define TIOCPKT_IOCTL 64
#define TIOCNOTTY 0x5422
@ -91,6 +92,7 @@
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
@ -106,7 +108,5 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#endif /* _ASM_ALPHA_IOCTLS_H */

2
arch/alpha/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
#endif /* !(_ALPHA_SCATTERLIST_H) */

1
arch/alpha/include/asm/termbits.h
View File

@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0x00800000
#define PENDIN 0x20000000
#define IEXTEN 0x00000400
#define EXTPROC 0x10000000
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 0

8
arch/alpha/kernel/osf_sys.c
View File

@ -234,11 +234,11 @@ linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_st
}
static int
do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
do_osf_statfs(struct path *path, struct osf_statfs __user *buffer,
unsigned long bufsiz)
{
struct kstatfs linux_stat;
int error = vfs_statfs(dentry, &linux_stat);
int error = vfs_statfs(path, &linux_stat);
if (!error)
error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
return error;
@ -252,7 +252,7 @@ SYSCALL_DEFINE3(osf_statfs, char __user *, pathname,
retval = user_path(pathname, &path);
if (!retval) {
retval = do_osf_statfs(path.dentry, buffer, bufsiz);
retval = do_osf_statfs(&path buffer, bufsiz);
path_put(&path);
}
return retval;
@ -267,7 +267,7 @@ SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
retval = -EBADF;
file = fget(fd);
if (file) {
retval = do_osf_statfs(file->f_path.dentry, buffer, bufsiz);
retval = do_osf_statfs(&file->f_path, buffer, bufsiz);
fput(file);
}
return retval;

2
arch/arm/include/asm/ioctls.h
View File

@ -52,6 +52,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
@ -81,6 +82,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

1
arch/arm/include/asm/termbits.h
View File

@ -177,6 +177,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0

4
arch/arm/mach-mx3/mach-armadillo5x0.c
View File

@ -551,9 +551,9 @@ static void __init armadillo5x0_init(void)
/* USB */
#if defined(CONFIG_USB_ULPI)
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &usbotg_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);

4
arch/arm/mach-mx3/mach-mx31lilly.c
View File

@ -245,9 +245,9 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
static void lilly1131_usb_init(void)
{
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh1, &usbh1_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);

2
arch/arm/mach-mx3/mach-mx31lite.c
View File

@ -256,7 +256,7 @@ static void __init mxc_board_init(void)
#if defined(CONFIG_USB_ULPI)
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif

2
arch/arm/mach-mx3/mach-mx31moboard.c
View File

@ -412,7 +412,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
static int __init moboard_usbh2_init(void)
{
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}

4
arch/arm/mach-mx3/mach-pcm037.c
View File

@ -654,13 +654,13 @@ static void __init mxc_board_init(void)
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif

2
arch/arm/mach-mx3/mach-pcm043.c
View File

@ -378,7 +378,7 @@ static void __init mxc_board_init(void)
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}

2
arch/arm/mach-mx3/mx31moboard-smartbot.c
View File

@ -134,7 +134,7 @@ static struct mxc_usbh_platform_data otg_host_pdata = {
static int __init smartbot_otg_host_init(void)
{
otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
}

2
arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
View File

@ -226,6 +226,7 @@
#define S3C_DIEPMSK S3C_HSOTG_REG(0x810)
#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7)
#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6)
#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5)
#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4)
@ -371,6 +372,7 @@
#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))

4
arch/avr32/include/asm/ioctls.h
View File

@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
@ -72,8 +73,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
@ -84,6 +83,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

2
arch/avr32/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffff)
#endif /* __ASM_AVR32_SCATTERLIST_H */

1
arch/avr32/include/asm/termbits.h
View File

@ -175,6 +175,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0

3
arch/blackfin/include/asm/nand.h
View File

@ -15,8 +15,6 @@
* partitions = mtd partition list
*/
#define NFC_PG_SIZE_256 0
#define NFC_PG_SIZE_512 1
#define NFC_PG_SIZE_OFFSET 9
#define NFC_NWIDTH_8 0
@ -30,7 +28,6 @@
struct bf5xx_nand_platform {
/* NAND chip information */
unsigned short page_size;
unsigned short data_width;
/* RD/WR strobe delay timing information, all times in SCLK cycles */

2
arch/blackfin/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffff)
#endif /* !(_BLACKFIN_SCATTERLIST_H) */

4
arch/cris/include/asm/ioctls.h
View File

@ -54,6 +54,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@ -70,8 +71,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
@ -87,6 +86,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

2
arch/cris/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x1fffffff)
#endif /* !(__ASM_CRIS_SCATTERLIST_H) */

1
arch/cris/include/asm/termbits.h
View File

@ -214,6 +214,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0

2
arch/frv/include/asm/ioctls.h
View File

@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@ -79,6 +80,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

2
arch/frv/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffffUL)
#endif /* !_ASM_SCATTERLIST_H */

1
arch/frv/include/asm/termbits.h
View File

@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */

2
arch/h8300/include/asm/ioctls.h
View File

@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@ -79,6 +80,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

2
arch/h8300/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffff)
#endif /* !(_H8300_SCATTERLIST_H) */

1
arch/h8300/include/asm/termbits.h
View File

@ -179,6 +179,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */

4
arch/ia64/include/asm/ioctls.h
View File

@ -59,6 +59,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@ -75,8 +76,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
@ -87,6 +86,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

9
arch/ia64/include/asm/scatterlist.h
View File

@ -2,15 +2,6 @@
#define _ASM_IA64_SCATTERLIST_H
#include <asm-generic/scatterlist.h>
/*
* It used to be that ISA_DMA_THRESHOLD had something to do with the
* DMA-limits of ISA-devices. Nowadays, its only remaining use (apart
* from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
* tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
* address of a page is that is allocated with GFP_DMA. On IA-64,
* that's 4GB - 1.
*/
#define ISA_DMA_THRESHOLD 0xffffffff
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_IA64_SCATTERLIST_H */

1
arch/ia64/include/asm/termbits.h
View File

@ -187,6 +187,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0

4
arch/m32r/include/asm/ioctls.h
View File

@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
@ -69,8 +70,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
@ -81,6 +80,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

2
arch/m32r/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x1fffffff)
#endif /* _ASM_M32R_SCATTERLIST_H */

1
arch/m32r/include/asm/termbits.h
View File

@ -179,6 +179,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0

2
arch/m68k/include/asm/ioctls.h
View File

@ -52,6 +52,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@ -78,6 +79,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

3
arch/m68k/include/asm/scatterlist.h
View File

@ -3,7 +3,4 @@
#include <asm-generic/scatterlist.h>
/* This is bogus and should go away. */
#define ISA_DMA_THRESHOLD (0x00ffffff)
#endif /* !(_M68K_SCATTERLIST_H) */

1
arch/m68k/include/asm/termbits.h
View File

@ -179,6 +179,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */

9
arch/m68k/mac/config.c
View File

@ -332,6 +332,15 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_CCLII,
.name = "Color Classic II",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IIci,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*

6
arch/m68k/mac/misc.c
View File

@ -91,7 +91,7 @@ static void cuda_write_pram(int offset, __u8 data)
#define cuda_write_pram NULL
#endif
#if 0 /* def CONFIG_ADB_PMU68K */
#ifdef CONFIG_ADB_PMU68K
static long pmu_read_time(void)
{
struct adb_request req;
@ -102,8 +102,8 @@ static long pmu_read_time(void)
while (!req.complete)
pmu_poll();
time = (req.reply[0] << 24) | (req.reply[1] << 16)
| (req.reply[2] << 8) | req.reply[3];
time = (req.reply[1] << 24) | (req.reply[2] << 16)
| (req.reply[3] << 8) | req.reply[4];
return time - RTC_OFFSET;
}

4
arch/m68k/sun3/leds.c
View File

@ -7,7 +7,7 @@ void sun3_leds(unsigned char byte)
unsigned char dfc;
GET_DFC(dfc);
SET_DFC(FC_CONTROL);
SET_CONTROL_BYTE(AC_LEDS,byte);
SET_DFC(FC_CONTROL);
SET_CONTROL_BYTE(AC_LEDS, byte);
SET_DFC(dfc);
}

2
arch/microblaze/include/asm/scatterlist.h
View File

@ -1,3 +1 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)

5
arch/mips/include/asm/ioctls.h
View File

@ -41,7 +41,7 @@
#define TIOCPKT_START 0x08 /* start output */
#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */
#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */
/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */
#define TIOCPKT_IOCTL 0x40 /* state change of pty driver */
#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */
#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */
#define TIOCNOTTY 0x5471 /* void tty association */
@ -83,6 +83,7 @@
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
@ -103,7 +104,5 @@
#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */
#endif /* __ASM_IOCTLS_H */

2
arch/mips/include/asm/scatterlist.h
View File

@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x00ffffffUL)
#endif /* __ASM_SCATTERLIST_H */

12
arch/mips/include/asm/statfs.h
View File

@ -33,7 +33,8 @@ struct statfs {
/* Linux specials */
__kernel_fsid_t f_fsid;
long f_namelen;
long f_spare[6];
long f_flags;
long f_spare[5];
};
#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
@ -53,7 +54,8 @@ struct statfs64 {
__u64 f_bavail;
__kernel_fsid_t f_fsid;
__u32 f_namelen;
__u32 f_spare[6];
__u32 f_flags;
__u32 f_spare[5];
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
@ -73,7 +75,8 @@ struct statfs64 { /* Same as struct statfs */
/* Linux specials */
__kernel_fsid_t f_fsid;
long f_namelen;
long f_spare[6];
long f_flags;
long f_spare[5];
};
struct compat_statfs64 {
@ -88,7 +91,8 @@ struct compat_statfs64 {
__u64 f_bavail;
__kernel_fsid_t f_fsid;
__u32 f_namelen;
__u32 f_spare[6];
__u32 f_flags;
__u32 f_spare[5];
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */

1
arch/mips/include/asm/termbits.h
View File

@ -203,6 +203,7 @@ struct ktermios {
#define PENDIN 0040000 /* Retype pending input (state). */
#define TOSTOP 0100000 /* Send SIGTTOU for background output. */
#define ITOSTOP TOSTOP
#define EXTPROC 0200000 /* External processing on pty */
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

4
arch/mn10300/include/asm/ioctls.h
View File

@ -54,6 +54,7 @@
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
* (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
@ -70,8 +71,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
@ -82,6 +81,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

2
arch/mn10300/include/asm/scatterlist.h
View File

@ -13,6 +13,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x00ffffff)
#endif /* _ASM_SCATTERLIST_H */

1
arch/mn10300/include/asm/termbits.h
View File

@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0

10
arch/parisc/hpux/sys_hpux.c
View File

@ -145,7 +145,7 @@ static int hpux_ustat(dev_t dev, struct hpux_ustat __user *ubuf)
s = user_get_super(dev);
if (s == NULL)
goto out;
err = vfs_statfs(s->s_root, &sbuf);
err = statfs_by_dentry(s->s_root, &sbuf);
drop_super(s);
if (err)
goto out;
@ -186,12 +186,12 @@ struct hpux_statfs {
int16_t f_pad;
};
static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
static int do_statfs_hpux(struct path *path, struct hpux_statfs *buf)
{
struct kstatfs st;
int retval;
retval = vfs_statfs(dentry, &st);
retval = vfs_statfs(path, &st);
if (retval)
return retval;
@ -219,7 +219,7 @@ asmlinkage long hpux_statfs(const char __user *pathname,
error = user_path(pathname, &path);
if (!error) {
struct hpux_statfs tmp;
error = vfs_statfs_hpux(path.dentry, &tmp);
error = do_statfs_hpux(&path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_put(&path);
@ -237,7 +237,7 @@ asmlinkage long hpux_fstatfs(unsigned int fd, struct hpux_statfs __user * buf)
file = fget(fd);
if (!file)
goto out;
error = vfs_statfs_hpux(file->f_path.dentry, &tmp);
error = do_statfs_hpux(&file->f_path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);

4
arch/parisc/include/asm/ioctls.h
View File

@ -52,6 +52,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@ -68,8 +69,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460 /* Get exact space used by quota */
#define TIOCSTART 0x5461
@ -84,6 +83,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

1
arch/parisc/include/asm/scatterlist.h
View File

@ -5,7 +5,6 @@
#include <asm/types.h>
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
#endif /* _ASM_PARISC_SCATTERLIST_H */

1
arch/parisc/include/asm/termbits.h
View File

@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0

2
arch/powerpc/include/asm/ioctls.h
View File

@ -80,6 +80,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
# define TIOCPKT_IOCTL 64
#define TIOCNOTTY 0x5422
@ -93,6 +94,7 @@
#define TIOCSRS485 0x542f
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454

3
arch/powerpc/include/asm/scatterlist.h
View File

@ -12,9 +12,6 @@
#include <asm/dma.h>
#include <asm-generic/scatterlist.h>
#ifdef __powerpc64__
#define ISA_DMA_THRESHOLD (~0UL)
#endif
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_POWERPC_SCATTERLIST_H */

1
arch/powerpc/include/asm/termbits.h
View File

@ -189,6 +189,7 @@ struct ktermios {
#define FLUSHO 0x00800000
#define PENDIN 0x20000000
#define IEXTEN 0x00000400
#define EXTPROC 0x10000000
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 0

12
arch/powerpc/platforms/cell/spufs/inode.c
View File

@ -110,7 +110,9 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr)
if ((attr->ia_valid & ATTR_SIZE) &&
(attr->ia_size != inode->i_size))
return -EINVAL;
return inode_setattr(inode, attr);
setattr_copy(inode, attr);
mark_inode_dirty(inode);
return 0;
}
@ -141,15 +143,14 @@ out:
}
static void
spufs_delete_inode(struct inode *inode)
spufs_evict_inode(struct inode *inode)
{
struct spufs_inode_info *ei = SPUFS_I(inode);
end_writeback(inode);
if (ei->i_ctx)
put_spu_context(ei->i_ctx);
if (ei->i_gang)
put_spu_gang(ei->i_gang);
clear_inode(inode);
}
static void spufs_prune_dir(struct dentry *dir)
@ -777,8 +778,7 @@ spufs_fill_super(struct super_block *sb, void *data, int silent)
.alloc_inode = spufs_alloc_inode,
.destroy_inode = spufs_destroy_inode,
.statfs = simple_statfs,
.delete_inode = spufs_delete_inode,
.drop_inode = generic_delete_inode,
.evict_inode = spufs_evict_inode,
.show_options = generic_show_options,
};

6
arch/s390/hypfs/inode.c
View File

@ -117,10 +117,10 @@ static struct inode *hypfs_make_inode(struct super_block *sb, int mode)
return ret;
}
static void hypfs_drop_inode(struct inode *inode)
static void hypfs_evict_inode(struct inode *inode)
{
end_writeback(inode);
kfree(inode->i_private);
generic_delete_inode(inode);
}
static int hypfs_open(struct inode *inode, struct file *filp)
@ -460,7 +460,7 @@ static struct file_system_type hypfs_type = {
static const struct super_operations hypfs_s_ops = {
.statfs = simple_statfs,
.drop_inode = hypfs_drop_inode,
.evict_inode = hypfs_evict_inode,
.show_options = hypfs_show_options,
};

2
arch/s390/include/asm/ccwdev.h
View File

@ -208,6 +208,8 @@ extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
extern struct ccw_device *ccw_device_probe_console(void);
extern int ccw_device_force_console(void);
int ccw_device_siosl(struct ccw_device *);
// FIXME: these have to go
extern int _ccw_device_get_subchannel_number(struct ccw_device *);

2
arch/s390/include/asm/ioctls.h
View File

@ -60,6 +60,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@ -86,6 +87,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */

2
arch/s390/include/asm/scatterlist.h
View File

@ -1,3 +1 @@
#define ISA_DMA_THRESHOLD (~0UL)
#include <asm-generic/scatterlist.h>

9
arch/s390/include/asm/statfs.h
View File

@ -33,7 +33,8 @@ struct statfs {
__kernel_fsid_t f_fsid;
int f_namelen;
int f_frsize;
int f_spare[5];
int f_flags;
int f_spare[4];
};
struct statfs64 {
@ -47,7 +48,8 @@ struct statfs64 {
__kernel_fsid_t f_fsid;
int f_namelen;
int f_frsize;
int f_spare[5];
int f_flags;
int f_spare[4];
};
struct compat_statfs64 {
@ -61,7 +63,8 @@ struct compat_statfs64 {
__kernel_fsid_t f_fsid;
__u32 f_namelen;
__u32 f_frsize;
__u32 f_spare[5];
__u32 f_flags;
__u32 f_spare[4];
};
#endif /* __s390x__ */

2
arch/s390/include/asm/topology.h
View File

@ -30,8 +30,6 @@ static inline void s390_init_cpu_topology(void)
};
#endif
#define SD_MC_INIT SD_CPU_INIT
#include <asm-generic/topology.h>
#endif /* _ASM_S390_TOPOLOGY_H */

2
arch/s390/kernel/head.S
View File

@ -366,7 +366,7 @@ iplstart:
l %r1,.Lstartup
br %r1
.Linitrd:.long _end + 0x400000 # default address of initrd
.Linitrd:.long _end # default address of initrd
.Lparm: .long PARMAREA
.Lstartup: .long startup
.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40

11
arch/s390/mm/cmm.c
View File

@ -427,7 +427,7 @@ static struct notifier_block cmm_power_notifier = {
.notifier_call = cmm_power_event,
};
static int cmm_init(void)
static int __init cmm_init(void)
{
int rc = -ENOMEM;
@ -435,6 +435,13 @@ static int cmm_init(void)
if (!cmm_sysctl_header)
goto out_sysctl;
#ifdef CONFIG_CMM_IUCV
/* convert sender to uppercase characters */
if (sender) {
int len = strlen(sender);
while (len--)
sender[len] = toupper(sender[len]);
}
rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
if (rc < 0)
goto out_smsg;
@ -467,7 +474,7 @@ out_sysctl:
}
module_init(cmm_init);
static void cmm_exit(void)
static void __exit cmm_exit(void)
{
unregister_sysctl_table(cmm_sysctl_header);
#ifdef CONFIG_CMM_IUCV

2
arch/score/include/asm/scatterlist.h
View File

@ -1,8 +1,6 @@
#ifndef _ASM_SCORE_SCATTERLIST_H
#define _ASM_SCORE_SCATTERLIST_H
#define ISA_DMA_THRESHOLD (~0UL)
#include <asm-generic/scatterlist.h>
#endif /* _ASM_SCORE_SCATTERLIST_H */

2
arch/sh/include/asm/ioctls.h
View File

@ -69,6 +69,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
# define TIOCPKT_IOCTL 64
#define TIOCNOTTY _IO('T', 34) /* 0x5422 */
@ -84,6 +85,7 @@
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */

2
arch/sh/include/asm/scatterlist.h
View File

@ -1,8 +1,6 @@
#ifndef __ASM_SH_SCATTERLIST_H
#define __ASM_SH_SCATTERLIST_H
#define ISA_DMA_THRESHOLD phys_addr_mask()
#include <asm-generic/scatterlist.h>
#endif /* __ASM_SH_SCATTERLIST_H */

2
arch/sparc/include/asm/ioctls.h
View File

@ -80,6 +80,7 @@
/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */
#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */
#define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */
/* Little f */
#define FIOCLEX _IO('f', 1)
@ -132,5 +133,6 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#endif /* !(_ASM_SPARC_IOCTLS_H) */

1
arch/sparc/include/asm/scatterlist.h
View File

@ -3,7 +3,6 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
#define ARCH_HAS_SG_CHAIN
#endif /* !(_SPARC_SCATTERLIST_H) */

1
arch/sparc/include/asm/termbits.h
View File

@ -225,6 +225,7 @@ struct ktermios {
#define FLUSHO 0x00002000
#define PENDIN 0x00004000
#define IEXTEN 0x00008000
#define EXTPROC 0x00010000
/* modem lines */
#define TIOCM_LE 0x001

7
arch/um/drivers/ubd_kern.c
View File

@ -33,6 +33,7 @@
#include "linux/mm.h"
#include "linux/slab.h"
#include "linux/vmalloc.h"
#include "linux/smp_lock.h"
#include "linux/blkpg.h"
#include "linux/genhd.h"
#include "linux/spinlock.h"
@ -1098,6 +1099,7 @@ static int ubd_open(struct block_device *bdev, fmode_t mode)
struct ubd *ubd_dev = disk->private_data;
int err = 0;
lock_kernel();
if(ubd_dev->count == 0){
err = ubd_open_dev(ubd_dev);
if(err){
@ -1115,7 +1117,8 @@ static int ubd_open(struct block_device *bdev, fmode_t mode)
if(--ubd_dev->count == 0) ubd_close_dev(ubd_dev);
err = -EROFS;
}*/
out:
out:
unlock_kernel();
return err;
}
@ -1123,8 +1126,10 @@ static int ubd_release(struct gendisk *disk, fmode_t mode)
{
struct ubd *ubd_dev = disk->private_data;
lock_kernel();
if(--ubd_dev->count == 0)
ubd_close_dev(ubd_dev);
unlock_kernel();
return 0;
}

3
arch/um/include/shared/os.h
View File

@ -161,6 +161,9 @@ extern int os_stat_filesystem(char *path, long *bsize_out,
long *spare_out);
extern int os_change_dir(char *dir);
extern int os_fchange_dir(int fd);
extern unsigned os_major(unsigned long long dev);
extern unsigned os_minor(unsigned long long dev);
extern unsigned long long os_makedev(unsigned major, unsigned minor);
/* start_up.c */
extern void os_early_checks(void);

3
arch/um/kernel/ksyms.c
View File

@ -58,6 +58,9 @@ EXPORT_SYMBOL(os_accept_connection);
EXPORT_SYMBOL(os_rcv_fd);
EXPORT_SYMBOL(run_helper);
EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(os_major);
EXPORT_SYMBOL(os_minor);
EXPORT_SYMBOL(os_makedev);
EXPORT_SYMBOL(add_sigio_fd);
EXPORT_SYMBOL(ignore_sigio_fd);

15
arch/um/os-Linux/file.c
View File

@ -561,3 +561,18 @@ int os_lock_file(int fd, int excl)
out:
return err;
}
unsigned os_major(unsigned long long dev)
{
return major(dev);
}
unsigned os_minor(unsigned long long dev)
{
return minor(dev);
}
unsigned long long os_makedev(unsigned major, unsigned minor)
{
return makedev(major, minor);
}

4
arch/um/os-Linux/user_syms.c
View File

@ -103,6 +103,10 @@ EXPORT_SYMBOL_PROTO(getuid);
EXPORT_SYMBOL_PROTO(fsync);
EXPORT_SYMBOL_PROTO(fdatasync);
EXPORT_SYMBOL_PROTO(lstat64);
EXPORT_SYMBOL_PROTO(fstat64);
EXPORT_SYMBOL_PROTO(mknod);
/* Export symbols used by GCC for the stack protector. */
extern void __stack_smash_handler(void *) __attribute__((weak));
EXPORT_SYMBOL(__stack_smash_handler);

3
arch/x86/ia32/ia32entry.S
View File

@ -842,4 +842,7 @@ ia32_sys_call_table:
.quad compat_sys_rt_tgsigqueueinfo /* 335 */
.quad sys_perf_event_open
.quad compat_sys_recvmmsg
.quad sys_fanotify_init
.quad sys32_fanotify_mark
.quad sys_prlimit64 /* 340 */
ia32_syscall_end:

9
arch/x86/ia32/sys_ia32.c
View File

@ -546,3 +546,12 @@ asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_lo,
return sys_fallocate(fd, mode, ((u64)offset_hi << 32) | offset_lo,
((u64)len_hi << 32) | len_lo);
}
asmlinkage long sys32_fanotify_mark(int fanotify_fd, unsigned int flags,
u32 mask_lo, u32 mask_hi,
int fd, const char __user *pathname)
{
return sys_fanotify_mark(fanotify_fd, flags,
((u64)mask_hi << 32) | mask_lo,
fd, pathname);
}

1
arch/x86/include/asm/scatterlist.h
View File

@ -3,7 +3,6 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x00ffffff)
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_X86_SCATTERLIST_H */

3
arch/x86/include/asm/sys_ia32.h
View File

@ -80,4 +80,7 @@ asmlinkage long sys32_rt_sigreturn(struct pt_regs *);
/* ia32/ipc32.c */
asmlinkage long sys32_ipc(u32, int, int, int, compat_uptr_t, u32);
asmlinkage long sys32_fanotify_mark(int, unsigned int, u32, u32, int,
const char __user *);
#endif /* _ASM_X86_SYS_IA32_H */

5
arch/x86/include/asm/unistd_32.h
View File

@ -343,10 +343,13 @@
#define __NR_rt_tgsigqueueinfo 335
#define __NR_perf_event_open 336
#define __NR_recvmmsg 337
#define __NR_fanotify_init 338
#define __NR_fanotify_mark 339
#define __NR_prlimit64 340
#ifdef __KERNEL__
#define NR_syscalls 338
#define NR_syscalls 341
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR

6
arch/x86/include/asm/unistd_64.h
View File

@ -663,6 +663,12 @@ __SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
#define __NR_recvmmsg 299
__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
#define __NR_fanotify_init 300
__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
#define __NR_fanotify_mark 301
__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
#define __NR_prlimit64 302
__SYSCALL(__NR_prlimit64, sys_prlimit64)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR

3
arch/x86/kernel/syscall_table_32.S
View File

@ -337,3 +337,6 @@ ENTRY(sys_call_table)
.long sys_rt_tgsigqueueinfo /* 335 */
.long sys_perf_event_open
.long sys_recvmmsg
.long sys_fanotify_init
.long sys_fanotify_mark
.long sys_prlimit64 /* 340 */

2
arch/xtensa/include/asm/ioctls.h
View File

@ -81,6 +81,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
# define TIOCPKT_IOCTL 64
#define TIOCNOTTY _IO('T', 34)
@ -97,6 +98,7 @@
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83)
#define TIOCSERGWILD _IOR('T', 84, int)

2
arch/xtensa/include/asm/scatterlist.h
View File

@ -13,6 +13,4 @@
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
#endif /* _XTENSA_SCATTERLIST_H */

Some files were not shown because too many files have changed in this diff Show More