From 6534c897fd749b65c3d35a5328227b5786243ec6 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 26 May 2020 18:22:02 +0800 Subject: [PATCH] mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In current code, we add 1ms dealy after each tuning command for standard tuning method. Adding this 1ms dealy is because USDHC default check the CMD CRC and DATA line. If detect the CMD CRC, USDHC standard tuning IC logic do not wait for the tuning data sending out by the card, trigger the buffer read ready interrupt immediately, and step to next cycle. So when next time the new tuning command send out by USDHC, card may still not send out the tuning data of the upper command，then some eMMC cards may stuck, can't response to any command, block the whole tuning procedure. If do not check the CMD CRC for tuning, then do not has this issue. USDHC will wait for the tuning data of each tuning command and check them. If the tuning data pass the check, it also means the CMD line also okay for tuning. So this patch disable the CMD CRC check for tuning, save some time for the whole tuning procedure. Signed-off-by: Haibo Chen Link: https://lore.kernel.org/r/1590488522-9292-2-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson (cherry picked from commit 16e40e5b1e3c6646fd90d0c3186703d209216f03) --- drivers/mmc/host/sdhci-esdhc-imx.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 83bc848aa34d..ab1af2b06993 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -100,6 +100,7 @@ /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ #define ESDHC_TUNING_START_TAP_DEFAULT 0x1 #define ESDHC_TUNING_START_TAP_MASK 0x7f +#define ESDHC_TUNING_CMD_CRC_CHECK_DISABLE (1 << 7) #define ESDHC_TUNING_STEP_MASK 0x00070000 #define ESDHC_TUNING_STEP_SHIFT 16 @@ -1336,6 +1337,18 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) tmp |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT; } + + /* Disable the CMD CRC check for tuning, if not, need to + * add some delay after every tuning command, because + * hardware standard tuning logic will directly go to next + * step once it detect the CMD CRC error, will not wait for + * the card side to finally send out the tuning data, trigger + * the buffer read ready interrupt immediately. If usdhc send + * the next tuning command some eMMC card will stuck, can't + * response, block the tuning procedure or the first command + * after the whole tuning procedure always can't get any response. + */ + tmp |= ESDHC_TUNING_CMD_CRC_CHECK_DISABLE; writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL); } else if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { /* @@ -1677,8 +1690,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (err) goto disable_ahb_clk; - host->tuning_delay = 1; - sdhci_esdhc_imx_hwinit(host); if ((host->mmc->pm_caps & MMC_PM_KEEP_POWER) &&