redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: SoC platform updates for v4.9 

These are updates for platform specific code on 32-bit ARM machines,
 essentially anything that can not (yet) be expressed using DT files.
 
 Noteworthy changes include:
 
 - We get support for running in big-endian mode on two platforms:
   sunxi (Allwinner) and s3c24xx (old Samsung).
 
 - The recently added Uniphier platform now uses standard PSCI
   methods for SMP booting and we remove support for old bootloader
   versions that did not support it yet.
 
 - In sunxi, we gain support for the "Nextthing GR8" SoC, which
   is a close relative of the Allwinner A13 and R8 chips.
 
 - PXA completes its move over to the generic dmaengine framework
   and removes its old private API
 
 - mach-bcm gains support for BCM47189/BCM53573, their first ARM
   SoC with integrated 802.11ac wireless networking.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gUVGCrR//JCVInAQKoyA/8DeV4M2IL/csGvnDwroH8rjDCvdeVDG0b
 QhwtoIoy5Ur85fjZKsIJnu+8lZyB9Kun5p9mrjGsl1fo2PMjNKkOIN2BvV2r35Bo
 kcpogVbOzFBJ3decX2QlQ41hhZaFphGWt21oBtslDabRBMyDxsRrv10Qy1gazw6F
 aDwvSYUarUajtYq4tDli1mFbj6Tu5YZgL/mRWjEwM7fy4AE9MBd/R7/dAYGF6n7v
 LF4l46k4ZIWl1txFcTJ84fV1ugf0O1f0j3umpaRo3QFWonFXmEkFqkyVPZmfoqPf
 Q0MvLOZEOImA3UH1njpPV4PsZiDuA/aPuKYrV3aCfAcpKTvkWL5AJrc8YCBv3x/m
 rOeLC3EKKj7u0IBoIW4YjzFngMkLthrYQ4Mz2URa0CJNwnW3GK1HswmU8wvpF73p
 AMXxfpIjcf7tkauxMX3HOIltWa6DAa5C19lqKhiRzdwm884ZSJ3BRIswh1SHA4bz
 f9h80FhI9GisfUL8k+axTtI5nsaLc6fzT4rCbQlp/WyeWFODEycx9T0mhvzd9Adc
 7vEvAssh21x4AyZmfcKwb/7xsX15zN+dkB9AuX21ssmOvZ2Tb1zYYHItp0xtEi3R
 5hL/8TRAHyUgyDq6MBQyg3EOSW6A+IqrVPRi10ND5q8+dK9Xh1bx08Wp3fZRQMHw
 cBAWWa7pQLM=
 =y4XF
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - We get support for running in big-endian mode on two platforms:
     sunxi (Allwinner) and s3c24xx (old Samsung).

   - The recently added Uniphier platform now uses standard PSCI methods
     for SMP booting and we remove support for old bootloader versions
     that did not support it yet.

   - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a
     close relative of the Allwinner A13 and R8 chips.

   - PXA completes its move over to the generic dmaengine framework and
     removes its old private API

   - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC
     with integrated 802.11ac wireless networking"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: imx legacy: pca100: move peripheral initialization to .init_late
  ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
  ARM: imx legacy: pcm043: move peripheral initialization to .init_late
  ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
  ARM: imx legacy: vpr200: move peripheral initialization to .init_late
  ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
  ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
  ARM: imx legacy: qong: move peripheral initialization to .init_late
  ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: pcm037: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
  ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
  ARM: imx legacy: kzm: move peripheral initialization to .init_late
  MAINTAINERS: update list of Oxnas maintainers
  ARM: orion5x: remove extraneous NO_IRQ
  ARM: orion: simplify orion_ge00_switch_init
  ...
hifive-unleashed-5.1
Linus Torvalds 2016-10-07 21:18:42 -07:00
parent a771151a83 e40454d3f4
commit 66f2c6d952
86 changed files with 716 additions and 1305 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/arm/sunxi/README
View File

@ -31,6 +31,8 @@ SunXi family
+ User Manual
http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
- Next Thing Co GR8 (sun5i)
* Dual ARM Cortex-A7 based SoCs
- Allwinner A20 (sun7i)
+ User Manual

1
Documentation/devicetree/bindings/arm/sunxi.txt
View File

@ -14,3 +14,4 @@ using one of the following compatible strings:
allwinner,sun8i-a83t
allwinner,sun8i-h3
allwinner,sun9i-a80
nextthing,gr8

9
MAINTAINERS
View File

@ -1003,6 +1003,7 @@ M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: sun[x456789]i
F: arch/arm/boot/dts/ntc-gr8*
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
@ -1459,6 +1460,7 @@ F: arch/arm/mach-orion5x/ts78xx-*
ARM/OXNAS platform support
M: Neil Armstrong <narmstrong@baylibre.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-oxnas@lists.tuxfamily.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-oxnas/
F: arch/arm/boot/dts/oxnas*
@ -2596,6 +2598,13 @@ F: arch/arm/mach-bcm/bcm_5301x.c
F: arch/arm/boot/dts/bcm5301x*.dtsi
F: arch/arm/boot/dts/bcm470*
BROADCOM BCM53573 ARM ARCHITECTURE
M: Rafał Miłecki <rafal@milecki.pl>
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: arch/arm/boot/dts/bcm53573*
F: arch/arm/boot/dts/bcm47189*
BROADCOM BCM63XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com

22
arch/arm/Kconfig.debug
View File

@ -186,10 +186,11 @@ choice
config DEBUG_BRCMSTB_UART
bool "Use BRCMSTB UART for low-level debug"
depends on ARCH_BRCMSTB
select DEBUG_UART_8250
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on these devices.
their output to the first serial port on these devices. The
UART physical and virtual address is automatically provided
based on the chip identification register value.
If you have a Broadcom STB chip and would like early print
messages to appear over the UART, select this option.
@ -861,12 +862,12 @@ choice
via SCIF2 on Renesas R-Car H1 (R8A7779).
config DEBUG_RCAR_GEN2_SCIF0
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793"
depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
help
Say Y here if you want kernel low-level debugging support
via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
M2-N (R8A7793).
via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H
(R8A7792), or M2-N (R8A7793).
config DEBUG_RCAR_GEN2_SCIF2
bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
@ -1430,6 +1431,7 @@ config DEBUG_LL_INCLUDE
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
default "mach/debug-macro.S"
# Compatibility options for PL01x
@ -1520,7 +1522,6 @@ config DEBUG_UART_PHYS
default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
default 0xe8008000 if DEBUG_R7S72100_SCIF2
default 0xf0000be0 if ARCH_EBSA110
default 0xf040ab00 if DEBUG_BRCMSTB_UART
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
@ -1604,7 +1605,6 @@ config DEBUG_UART_VIRT
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfc40ab00 if DEBUG_BRCMSTB_UART
default 0xfc705000 if DEBUG_ZTE_ZX
default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
@ -1677,8 +1677,7 @@ config DEBUG_UART_8250_WORD
DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
DEBUG_BRCMSTB_UART
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
config DEBUG_UART_8250_PALMCHIP
bool "8250 UART is Palmchip BK-310x"
@ -1697,7 +1696,8 @@ config DEBUG_UNCOMPRESS
bool
depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
(!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
!DEBUG_BRCMSTB_UART
help
This option influences the normal decompressor output for
multiplatform kernels. Normally, multiplatform kernels disable

1
arch/arm/configs/colibri_pxa270_defconfig
View File

@ -83,7 +83,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y

1
arch/arm/configs/lpd270_defconfig
View File

@ -31,7 +31,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_BLK_DEV_NBD=y
CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y

1
arch/arm/configs/pxa255-idp_defconfig
View File

@ -28,7 +28,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y

2
arch/arm/configs/pxa_defconfig
View File

@ -26,8 +26,6 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_LDM_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_ARCH_PXA=y
CONFIG_MACH_PXA27X_DT=y
CONFIG_MACH_PXA3XX_DT=y
CONFIG_ARCH_LUBBOCK=y
CONFIG_MACH_MAINSTONE=y
CONFIG_MACH_ZYLONITE300=y

2
arch/arm/configs/trizeps4_defconfig
View File

@ -94,8 +94,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y

20
arch/arm/include/asm/hardware/cache-uniphier.h
View File

@ -1,5 +1,6 @@
/*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -19,28 +20,11 @@
#ifdef CONFIG_CACHE_UNIPHIER
int uniphier_cache_init(void);
int uniphier_cache_l2_is_enabled(void);
void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
void uniphier_cache_l2_set_locked_ways(u32 way_mask);
#else
static inline int uniphier_cache_init(void)
{
return -ENODEV;
}
static inline int uniphier_cache_l2_is_enabled(void)
{
return 0;
}
static inline void uniphier_cache_l2_touch_range(unsigned long start,
unsigned long end)
{
}
static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
{
}
#endif
#endif /* __CACHE_UNIPHIER_H */

145
arch/arm/include/debug/brcmstb.S 100644
View File

@ -0,0 +1,145 @@
/*
* Copyright (C) 2016 Broadcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/serial_reg.h>
/* Physical register offset and virtual register offset */
#define REG_PHYS_BASE 0xf0000000
#define REG_VIRT_BASE 0xfc000000
#define REG_PHYS_ADDR(x) ((x) + REG_PHYS_BASE)
/* Product id can be read from here */
#define SUN_TOP_CTRL_BASE REG_PHYS_ADDR(0x404000)
#define UARTA_3390 REG_PHYS_ADDR(0x40a900)
#define UARTA_7250 REG_PHYS_ADDR(0x40b400)
#define UARTA_7268 REG_PHYS_ADDR(0x40c000)
#define UARTA_7271 UARTA_7268
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
#define UARTA_7366 UARTA_7364
#define UARTA_74371 REG_PHYS_ADDR(0x406b00)
#define UARTA_7439 REG_PHYS_ADDR(0x40a900)
#define UARTA_7445 REG_PHYS_ADDR(0x40ab00)
#define UART_SHIFT 2
#define checkuart(rp, rv, family_id, family) \
/* Load family id */ \
ldr rp, =family_id ; \
/* Compare SUN_TOP_CTRL value against it */ \
cmp rp, rv ; \
/* Passed test, load address */ \
ldreq rp, =UARTA_##family ; \
/* Jump to save UART address */ \
beq 91f
.macro addruart, rp, rv, tmp
adr \rp, 99f @ actual addr of 99f
ldr \rv, [\rp] @ linked addr is stored there
sub \rv, \rv, \rp @ offset between the two
ldr \rp, [\rp, #4] @ linked brcmstb_uart_config
sub \tmp, \rp, \rv @ actual brcmstb_uart_config
ldr \rp, [\tmp] @ Load brcmstb_uart_config
cmp \rp, #1 @ needs initialization?
bne 100f @ no; go load the addresses
mov \rv, #0 @ yes; record init is done
str \rv, [\tmp]
/* Check SUN_TOP_CTRL base */
ldr \rp, =SUN_TOP_CTRL_BASE @ load SUN_TOP_CTRL PA
ldr \rv, [\rp, #0] @ get register contents
and \rv, \rv, #0xffffff00 @ strip revision bits [7:0]
/* Chip specific detection starts here */
20: checkuart(\rp, \rv, 0x33900000, 3390)
21: checkuart(\rp, \rv, 0x72500000, 7250)
22: checkuart(\rp, \rv, 0x72680000, 7268)
23: checkuart(\rp, \rv, 0x72710000, 7271)
24: checkuart(\rp, \rv, 0x73640000, 7364)
25: checkuart(\rp, \rv, 0x73660000, 7366)
26: checkuart(\rp, \rv, 0x07437100, 74371)
27: checkuart(\rp, \rv, 0x74390000, 7439)
28: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
/* fall through */
/* Record whichever UART we chose */
91: str \rp, [\tmp, #4] @ Store in brcmstb_uart_phys
cmp \rp, #0 @ Valid UART address?
bne 92f @ Yes, go process it
str \rp, [\tmp, #8] @ Store 0 in brcmstb_uart_virt
b 100f @ Done
92: and \rv, \rp, #0xffffff @ offset within 16MB section
add \rv, \rv, #REG_VIRT_BASE
str \rv, [\tmp, #8] @ Store in brcmstb_uart_virt
b 100f
.align
99: .word .
.word brcmstb_uart_config
.ltorg
/* Load previously selected UART address */
100: ldr \rp, [\tmp, #4] @ Load brcmstb_uart_phys
ldr \rv, [\tmp, #8] @ Load brcmstb_uart_virt
.endm
.macro store, rd, rx:vararg
str \rd, \rx
.endm
.macro load, rd, rx:vararg
ldr \rd, \rx
.endm
.macro senduart,rd,rx
store \rd, [\rx, #UART_TX << UART_SHIFT]
.endm
.macro busyuart,rd,rx
1002: load \rd, [\rx, #UART_LSR << UART_SHIFT]
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
bne 1002b
.endm
.macro waituart,rd,rx
.endm
/*
* Storage for the state maintained by the macros above.
*
* In the kernel proper, this data is located in arch/arm/mach-bcm/brcmstb.c.
* That's because this header is included from multiple files, and we only
* want a single copy of the data. In particular, the UART probing code above
* assumes it's running using physical addresses. This is true when this file
* is included from head.o, but not when included from debug.o. So we need
* to share the probe results between the two copies, rather than having
* to re-run the probing again later.
*
* In the decompressor, we put the symbol/storage right here, since common.c
* isn't included in the decompressor build. This symbol gets put in .text
* even though it's really data, since .data is discarded from the
* decompressor. Luckily, .text is writeable in the decompressor, unless
* CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
*/
#if defined(ZIMAGE)
brcmstb_uart_config:
/* Debug UART initialization required */
.word 1
/* Debug UART physical address */
.word 0
/* Debug UART virtual address */
.word 0
#endif

14
arch/arm/mach-bcm/Kconfig
View File

@ -158,6 +158,20 @@ config ARCH_BCM2835
This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
This SoC is used in the Raspberry Pi and Roku 2 devices.
config ARCH_BCM_53573
bool "Broadcom BCM53573 SoC series support"
depends on ARCH_MULTI_V7
select ARCH_BCM_IPROC
select HAVE_ARM_ARCH_TIMER
help
BCM53573 series is set of SoCs using ARM Cortex-A7 CPUs with wireless
embedded in the chipset.
This SoC line is mostly used in home routers and is some cheaper
alternative for Northstar family.
The base chip is BCM53573 and there are some packaging modifications
like BCM47189 and BCM47452.
config ARCH_BCM_63XX
bool "Broadcom BCM63xx DSL SoC"
depends on ARCH_MULTI_V7

16
arch/arm/mach-bcm/brcmstb.c
View File

@ -19,6 +19,22 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/*
* Storage for debug-macro.S's state.
*
* This must be in .data not .bss so that it gets initialized each time the
* kernel is loaded. The data is declared here rather than debug-macro.S so
* that multiple inclusions of debug-macro.S point at the same data.
*/
u32 brcmstb_uart_config[3] = {
/* Debug UART initialization required */
1,
/* Debug UART physical address */
0,
/* Debug UART virtual address */
0,
};
static void __init brcmstb_init_irq(void)
{
irqchip_init();

1
arch/arm/mach-davinci/da850.c
View File

@ -501,6 +501,7 @@ static struct clk_lookup da850_clks[] = {
CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("ti-aemif", NULL, &aemif_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "usb11", &usb11_clk),
CLK(NULL, "usb20", &usb20_clk),

1
arch/arm/mach-davinci/da8xx-dt.c
View File

@ -37,6 +37,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
NULL),
OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL),
{}
};

1
arch/arm/mach-exynos/Kconfig
View File

@ -12,6 +12,7 @@ menuconfig ARCH_EXYNOS
depends on ARCH_MULTI_V7
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
select COMMON_CLK_SAMSUNG

15
arch/arm/mach-exynos/exynos.c
View File

@ -30,25 +30,10 @@
static struct map_desc exynos4_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_COREPERI_BASE,
.pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_DMC0,
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_DMC1,
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC1),
.length = SZ_64K,
.type = MT_DEVICE,
},
};

5
arch/arm/mach-exynos/include/mach/map.h
View File

@ -18,11 +18,6 @@
#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_CMU 0x10030000
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_DMC1 0x10410000
#define EXYNOS4_PA_COREPERI 0x10500000
#endif /* __ASM_ARCH_MAP_H */

1
arch/arm/mach-imx/Makefile
View File

@ -27,6 +27,7 @@ obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
endif
ifdef CONFIG_SND_IMX_SOC

2
arch/arm/mach-imx/common.h
View File

@ -104,7 +104,7 @@ void imx_anatop_init(void);
void imx_anatop_pre_suspend(void);
void imx_anatop_post_resume(void);
int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
int imx_mmdc_get_ddr_type(void);

2
arch/arm/mach-imx/cpuidle-imx6q.c
View File

@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused);
int __init imx6q_cpuidle_init(void)
{
/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
imx6q_set_int_mem_clk_lpm(true);
imx6_set_int_mem_clk_lpm(true);
return cpuidle_register(&imx6q_cpuidle_driver, NULL);
}

11
arch/arm/mach-imx/cpuidle-imx6sx.c
View File

@ -9,6 +9,7 @@
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/module.h>
#include <asm/cacheflush.h>
#include <asm/cpuidle.h>
#include <asm/suspend.h>
@ -17,6 +18,15 @@
static int imx6sx_idle_finish(unsigned long val)
{
/*
* for Cortex-A7 which has an internal L2
* cache, need to flush it before powering
* down ARM platform, since flushing L1 cache
* here again has very small overhead, compared
* to adding conditional code for L2 cache type,
* just call flush_cache_all() is fine.
*/
flush_cache_all();
cpu_do_idle();
return 0;
@ -90,6 +100,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
int __init imx6sx_cpuidle_init(void)
{
imx6_set_int_mem_clk_lpm(true);
imx6_enable_rbc(false);
/*
* set ARM power up/down timing to the fastest,

39
arch/arm/mach-imx/mach-armadillo5x0.c
View File

@ -493,24 +493,12 @@ static void __init armadillo5x0_init(void)
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
armadillo5x0_smc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
armadillo5x0_smc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
imx_add_gpio_keys(&armadillo5x0_button_data);
imx31_add_imx_i2c1(NULL);
/* Register UART */
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
/* SMSC9118 IRQ pin */
gpio_direction_input(MX31_PIN_GPIO1_0);
/* Register SDHC */
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* Register FB */
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
@ -527,21 +515,39 @@ static void __init armadillo5x0_init(void)
/* set NAND page size to 2k if not configured via boot mode pins */
imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
mx3_ccm_base + MXC_CCM_RCSR);
}
static void __init armadillo5x0_late(void)
{
armadillo5x0_smc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
armadillo5x0_smc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
imx_add_gpio_keys(&armadillo5x0_button_data);
/* SMSC9118 IRQ pin */
gpio_direction_input(MX31_PIN_GPIO1_0);
/* Register SDHC */
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* RTC */
/* Get RTC IRQ and register the chip */
if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
armadillo5x0_i2c_rtc.irq =
gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
else
gpio_free(ARMADILLO5X0_RTC_GPIO);
}
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
/* USB */
usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbotg_pdata.otg)
@ -565,5 +571,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
.init_irq = mx31_init_irq,
.init_time = armadillo5x0_timer_init,
.init_machine = armadillo5x0_init,
.init_late = armadillo5x0_late,
.restart = mxc_restart,
MACHINE_END

24
arch/arm/mach-imx/mach-imx27_visstrim_m10.c
View File

@ -540,7 +540,6 @@ static void __init visstrim_m10_revision(void)
static void __init visstrim_m10_board_init(void)
{
int ret;
int mo_version;
imx27_soc_init();
visstrim_m10_revision();
@ -550,11 +549,6 @@ static void __init visstrim_m10_board_init(void)
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
ret = gpio_request_array(visstrim_m10_gpios,
ARRAY_SIZE(visstrim_m10_gpios));
if (ret)
pr_err("Failed to request gpios (%d)\n", ret);
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
@ -566,12 +560,26 @@ static void __init visstrim_m10_board_init(void)
imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init visstrim_m10_late_init(void)
{
int mo_version, ret;
ret = gpio_request_array(visstrim_m10_gpios,
ARRAY_SIZE(visstrim_m10_gpios));
if (ret)
pr_err("Failed to request gpios (%d)\n", ret);
imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
sizeof(snd_mx27vis_pdata));
platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
&iclink_tvp5150, sizeof(iclink_tvp5150));
gpio_led_register_device(0, &visstrim_m10_led_data);
/* Use mother board version to decide what video devices we shall use */
@ -591,6 +599,7 @@ static void __init visstrim_m10_board_init(void)
visstrim_deinterlace_init();
visstrim_analog_camera_init();
}
visstrim_coda_init();
}
@ -607,5 +616,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
.init_irq = mx27_init_irq,
.init_time = visstrim_m10_timer_init,
.init_machine = visstrim_m10_board_init,
.init_late = visstrim_m10_late_init,
.restart = mxc_restart,
MACHINE_END

3
arch/arm/mach-imx/mach-imx6ul.c
View File

@ -16,6 +16,7 @@
#include <asm/mach/map.h>
#include "common.h"
#include "cpuidle.h"
static void __init imx6ul_enet_clk_init(void)
{
@ -80,6 +81,8 @@ static void __init imx6ul_init_irq(void)
static void __init imx6ul_init_late(void)
{
imx6sx_cpuidle_init();
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
}

9
arch/arm/mach-imx/mach-kzm_arm11_01.c
View File

@ -245,13 +245,17 @@ static void __init kzm_board_init(void)
mxc_iomux_setup_multiple_pins(kzm_pins,
ARRAY_SIZE(kzm_pins), "kzm");
kzm_init_ext_uart();
kzm_init_smsc9118();
kzm_init_imx_uart();
pr_info("Clock input source is 26MHz\n");
}
static void __init kzm_late_init(void)
{
kzm_init_ext_uart();
kzm_init_smsc9118();
}
/*
* This structure defines static mappings for the kzm-arm11-01 board.
*/
@ -291,5 +295,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.init_irq = mx31_init_irq,
.init_time = kzm_timer_init,
.init_machine = kzm_board_init,
.init_late = kzm_late_init,
.restart = mxc_restart,
MACHINE_END

13
arch/arm/mach-imx/mach-mx21ads.c
View File

@ -302,12 +302,16 @@ static void __init mx21ads_board_init(void)
imx21_add_imx_uart0(&uart_pdata_rts);
imx21_add_imx_uart2(&uart_pdata_norts);
imx21_add_imx_uart3(&uart_pdata_rts);
imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx21_add_imx_fb(&mx21ads_fb_data);
}
static void __init mx21ads_late_init(void)
{
imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
mx21ads_cs8900_resources[1].start =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
@ -328,6 +332,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
.init_time = mx21ads_timer_init,
.init_machine = mx21ads_board_init,
.init_machine = mx21ads_board_init,
.init_late = mx21ads_late_init,
.restart = mxc_restart,
MACHINE_END

30
arch/arm/mach-imx/mach-mx27_3ds.c
View File

@ -485,17 +485,32 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
static void __init mx27pdk_init(void)
{
int ret;
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
imx27_add_imx_keypad(&mx27_3ds_keymap_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_imx2_wdt();
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx27_add_imx_fb(&mx27_3ds_fb_data);
imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
}
static void __init mx27pdk_late_init(void)
{
int ret;
mx27_3ds_sdhc1_enable_level_translator();
imx27_add_mxc_mmc(0, &sdhc1_pdata);
otg_phy_init();
if (otg_mode_host) {
@ -509,17 +524,12 @@ static void __init mx27pdk_init(void)
if (!otg_mode_host)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx27_add_imx_fb(&mx27_3ds_fb_data);
ret = gpio_request_array(mx27_3ds_camera_gpios,
ARRAY_SIZE(mx27_3ds_camera_gpios));
@ -529,7 +539,6 @@ static void __init mx27pdk_init(void)
}
imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
@ -547,5 +556,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
.init_irq = mx27_init_irq,
.init_time = mx27pdk_timer_init,
.init_machine = mx27pdk_init,
.init_late = mx27pdk_late_init,
.restart = mxc_restart,
MACHINE_END

13
arch/arm/mach-imx/mach-mx27ads.c
View File

@ -352,14 +352,20 @@ static void __init mx27ads_board_init(void)
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
mx27ads_regulator_init();
imx27_add_imx_fb(&mx27ads_fb_data);
imx27_add_fec(NULL);
imx27_add_mxc_w1();
}
static void __init mx27ads_late_init(void)
{
mx27ads_regulator_init();
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_mxc_mmc(1, &sdhc2_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx27_add_mxc_w1();
}
static void __init mx27ads_timer_init(void)
@ -395,5 +401,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
.init_irq = mx27_init_irq,
.init_time = mx27ads_timer_init,
.init_machine = mx27ads_board_init,
.init_late = mx27ads_late_init,
.restart = mxc_restart,
MACHINE_END

43
arch/arm/mach-imx/mach-mx31_3ds.c
View File

@ -694,8 +694,6 @@ static struct platform_device *devices[] __initdata = {
static void __init mx31_3ds_init(void)
{
int ret;
imx31_soc_init();
/* Configure SPI1 IOMUX */
@ -708,14 +706,31 @@ static void __init mx31_3ds_init(void)
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
platform_add_devices(devices, ARRAY_SIZE(devices));
imx31_add_imx_keypad(&mx31_3ds_keymap_data);
imx31_add_imx2_wdt();
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
imx31_add_spi_imx0(&spi0_pdata);
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
static void __init mx31_3ds_late(void)
{
int ret;
mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
platform_add_devices(devices, ARRAY_SIZE(devices));
mx31_3ds_usbotg_init();
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
@ -733,14 +748,9 @@ static void __init mx31_3ds_init(void)
if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
printk(KERN_WARNING "Init of the debug board failed, all "
"devices on the debug board are unusable.\n");
imx31_add_imx2_wdt();
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
imx31_add_mxc_mmc(0, &sdhc1_pdata);
"devices on the debug board are unusable.\n");
imx31_add_spi_imx0(&spi0_pdata);
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
imx31_add_mxc_mmc(0, &sdhc1_pdata);
/* CSI */
/* Camera power: default - off */
@ -752,10 +762,6 @@ static void __init mx31_3ds_init(void)
}
mx31_3ds_init_camera();
imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
static void __init mx31_3ds_timer_init(void)
@ -778,6 +784,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
.init_irq = mx31_init_irq,
.init_time = mx31_3ds_timer_init,
.init_machine = mx31_3ds_init,
.init_late = mx31_3ds_late,
.reserve = mx31_3ds_reserve,
.restart = mxc_restart,
MACHINE_END

18
arch/arm/mach-imx/mach-mx31ads.c
View File

@ -554,20 +554,19 @@ static void __init mx31ads_map_io(void)
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
static void __init mx31ads_init_irq(void)
{
mx31_init_irq();
mx31ads_init_expio();
}
static void __init mx31ads_init(void)
{
imx31_soc_init();
mxc_init_extuart();
mxc_init_imx_uart();
mxc_init_i2c();
mxc_init_audio();
}
static void __init mx31ads_late(void)
{
mx31ads_init_expio();
mxc_init_extuart();
mxc_init_i2c();
mxc_init_ext_ethernet();
}
@ -581,8 +580,9 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.atag_offset = 0x100,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
.init_irq = mx31_init_irq,
.init_time = mx31ads_timer_init,
.init_machine = mx31ads_init,
.init_late = mx31ads_late,
.restart = mxc_restart,
MACHINE_END

50
arch/arm/mach-imx/mach-mx31lilly.c
View File

@ -56,6 +56,26 @@
* appropriate baseboard support code.
*/
static unsigned int mx31lilly_pins[] __initdata = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
MX31_PIN_CTS2__CTS2,
MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
MX31_PIN_CSPI3_MOSI__RXD3,
MX31_PIN_CSPI3_MISO__TXD3,
MX31_PIN_CSPI3_SCLK__RTS3,
MX31_PIN_CSPI3_SPI_RDY__CTS3,
};
/* UART */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* SMSC ethernet support */
static struct resource smsc91x_resources[] = {
@ -252,16 +272,12 @@ static void __init mx31lilly_board_init(void)
{
imx31_soc_init();
switch (mx31lilly_baseboard) {
case MX31LILLY_NOBOARD:
break;
case MX31LILLY_DB:
mx31lilly_db_init();
break;
default:
printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
mx31lilly_baseboard);
}
mxc_iomux_setup_multiple_pins(mx31lilly_pins,
ARRAY_SIZE(mx31lilly_pins), "mx31lily");
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
@ -284,10 +300,17 @@ static void __init mx31lilly_board_init(void)
imx31_add_spi_imx0(&spi0_pdata);
imx31_add_spi_imx1(&spi1_pdata);
mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_dev, 1);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
}
static void __init mx31lilly_late_init(void)
{
if (mx31lilly_baseboard == MX31LILLY_DB)
mx31lilly_db_init();
mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_dev, 1);
smsc91x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
@ -310,6 +333,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31lilly_timer_init,
.init_machine = mx31lilly_board_init,
.init_machine = mx31lilly_board_init,
.init_late = mx31lilly_late_init,
.restart = mxc_restart,
MACHINE_END

68
arch/arm/mach-imx/mach-mx31lite.c
View File

@ -52,6 +52,19 @@
*/
static unsigned int mx31lite_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* SPI 0 */
MX31_PIN_CSPI1_SCLK__SCLK,
MX31_PIN_CSPI1_MOSI__MOSI,
MX31_PIN_CSPI1_MISO__MISO,
MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* LAN9117 IRQ pin */
IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
/* SPI 1 */
@ -64,6 +77,23 @@ static unsigned int mx31lite_pins[] = {
MX31_PIN_CSPI2_SS2__SS2,
};
/* UART */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* SPI */
static int spi0_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
static const struct spi_imx_master spi0_pdata __initconst = {
.chipselect = spi0_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi0_internal_chipselect),
};
static const struct mxc_nand_platform_data
mx31lite_nand_board_info __initconst = {
.width = 1,
@ -103,13 +133,13 @@ static struct platform_device smsc911x_device = {
* The MC13783 is the only hard-wired SPI device on the module.
*/
static int spi_internal_chipselect[] = {
static int spi1_internal_chipselect[] = {
MXC_SPI_CS(0),
};
static const struct spi_imx_master spi1_pdata __initconst = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
.chipselect = spi1_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
};
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
@ -200,8 +230,6 @@ static struct platform_device physmap_flash_device = {
.num_resources = 1,
};
/*
* This structure defines the MX31 memory map.
*/
@ -233,29 +261,30 @@ static struct regulator_consumer_supply dummy_supplies[] = {
static void __init mx31lite_init(void)
{
int ret;
imx31_soc_init();
switch (mx31lite_baseboard) {
case MX31LITE_NOBOARD:
break;
case MX31LITE_DB:
mx31lite_db_init();
break;
default:
printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
mx31lite_baseboard);
}
mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
"mx31lite");
imx31_add_imx_uart0(&uart_pdata);
imx31_add_spi_imx0(&spi0_pdata);
/* NOR and NAND flash */
platform_device_register(&physmap_flash_device);
imx31_add_mxc_nand(&mx31lite_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
}
static void __init mx31lite_late(void)
{
int ret;
if (mx31lite_baseboard == MX31LITE_DB)
mx31lite_db_init();
mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_spi_dev, 1);
@ -265,8 +294,6 @@ static void __init mx31lite_init(void)
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
if (ret)
@ -294,5 +321,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
.init_irq = mx31_init_irq,
.init_time = mx31lite_timer_init,
.init_machine = mx31lite_init,
.init_late = mx31lite_late,
.restart = mxc_restart,
MACHINE_END

23
arch/arm/mach-imx/mach-mx31moboard.c
View File

@ -526,11 +526,9 @@ static void __init mx31moboard_init(void)
"moboard");
platform_add_devices(devices, ARRAY_SIZE(devices));
gpio_led_register_device(-1, &mx31moboard_led_pdata);
imx31_add_imx2_wdt();
moboard_uart0_init();
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
@ -540,6 +538,19 @@ static void __init mx31moboard_init(void)
imx31_add_spi_imx1(&moboard_spi1_pdata);
imx31_add_spi_imx2(&moboard_spi2_pdata);
mx31moboard_init_cam();
imx31_add_imx_ssi(0, &moboard_ssi_pdata);
pm_power_off = mx31moboard_poweroff;
}
static void __init mx31moboard_late(void)
{
gpio_led_register_device(-1, &mx31moboard_led_pdata);
moboard_uart0_init();
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
moboard_spi_board_info[0].irq =
@ -549,18 +560,11 @@ static void __init mx31moboard_init(void)
imx31_add_mxc_mmc(0, &sdhc1_pdata);
mx31moboard_init_cam();
usb_xcvr_reset();
moboard_usbh2_init();
imx31_add_imx_ssi(0, &moboard_ssi_pdata);
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
pm_power_off = mx31moboard_poweroff;
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
@ -601,5 +605,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
.init_irq = mx31_init_irq,
.init_time = mx31moboard_timer_init,
.init_machine = mx31moboard_init,
.init_late = mx31moboard_late,
.restart = mxc_restart,
MACHINE_END

15
arch/arm/mach-imx/mach-mx35_3ds.c
View File

@ -555,8 +555,6 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
*/
static void __init mx35_3ds_init(void)
{
struct platform_device *imx35_fb_pdev;
imx35_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
@ -579,9 +577,6 @@ static void __init mx35_3ds_init(void)
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
i2c_register_board_info(
@ -590,6 +585,15 @@ static void __init mx35_3ds_init(void)
imx35_add_ipu_core();
platform_device_register(&mx35_3ds_ov2640);
imx35_3ds_init_camera();
}
static void __init mx35_3ds_late_init(void)
{
struct platform_device *imx35_fb_pdev;
if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
@ -618,6 +622,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.init_irq = mx35_init_irq,
.init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
.init_late = mx35_3ds_late_init,
.reserve = mx35_3ds_reserve,
.restart = mxc_restart,
MACHINE_END

26
arch/arm/mach-imx/mach-pca100.c
View File

@ -362,12 +362,8 @@ static void __init pca100_init(void)
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
imx27_add_mxc_mmc(1, &sdhc_pdata);
imx27_add_mxc_nand(&pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
@ -382,6 +378,19 @@ static void __init pca100_init(void)
ARRAY_SIZE(pca100_spi_board_info));
imx27_add_spi_imx0(&pca100_spi0_data);
imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
imx27_add_imx2_wdt();
imx27_add_mxc_w1();
}
static void __init pca100_late_init(void)
{
imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_mxc_mmc(1, &sdhc_pdata);
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
@ -403,12 +412,6 @@ static void __init pca100_init(void)
if (usbh2_pdata.otg)
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
imx27_add_imx2_wdt();
imx27_add_mxc_w1();
}
static void __init pca100_timer_init(void)
@ -421,7 +424,8 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.init_machine = pca100_init,
.init_machine = pca100_init,
.init_late = pca100_late_init,
.init_time = pca100_timer_init,
.restart = mxc_restart,
MACHINE_END

95
arch/arm/mach-imx/mach-pcm037.c
View File

@ -576,8 +576,6 @@ static struct regulator_consumer_supply dummy_supplies[] = {
*/
static void __init pcm037_init(void)
{
int ret;
imx31_soc_init();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
@ -621,20 +619,6 @@ static void __init pcm037_init(void)
imx31_add_mxc_w1();
/* LAN9217 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
if (ret)
pr_warn("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
smsc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
smsc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
platform_device_register(&pcm037_eth);
}
/* I2C adapters and devices */
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
@ -643,10 +627,56 @@ static void __init pcm037_init(void)
imx31_add_imx_i2c2(&pcm037_i2c2_data);
imx31_add_mxc_nand(&pcm037_nand_board_info);
imx31_add_mxc_mmc(0, &sdhc_pdata);
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx31_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&otg_device_pdata);
}
static void __init pcm037_timer_init(void)
{
mx31_clocks_init(26000000);
}
static void __init pcm037_reserve(void)
{
/* reserve 4 MiB for mx3-camera */
mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
MX3_CAMERA_BUF_SIZE);
}
static void __init pcm037_init_late(void)
{
int ret;
/* LAN9217 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
if (!ret) {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
smsc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
smsc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
platform_device_register(&pcm037_eth);
} else {
pr_warn("could not get LAN irq gpio\n");
}
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* CSI */
/* Camera power: default - off */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
@ -663,37 +693,6 @@ static void __init pcm037_init(void)
gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
platform_device_register(&pcm970_sja1000);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx31_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&otg_device_pdata);
}
static void __init pcm037_timer_init(void)
{
mx31_clocks_init(26000000);
}
static void __init pcm037_reserve(void)
{
/* reserve 4 MiB for mx3-camera */
mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
MX3_CAMERA_BUF_SIZE);
}
static void __init pcm037_init_late(void)
{
pcm037_eet_init_devices();
}

10
arch/arm/mach-imx/mach-pcm043.c
View File

@ -363,7 +363,6 @@ static void __init pcm043_init(void)
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
imx35_add_imx_uart1(&uart_pdata);
@ -387,6 +386,12 @@ static void __init pcm043_init(void)
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_flexcan1();
}
static void __init pcm043_late_init(void)
{
imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
}
@ -402,6 +407,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.init_time = pcm043_timer_init,
.init_machine = pcm043_init,
.init_machine = pcm043_init,
.init_late = pcm043_late_init,
.restart = mxc_restart,
MACHINE_END

2
arch/arm/mach-imx/mach-qong.c
View File

@ -251,7 +251,6 @@ static void __init qong_init(void)
mxc_init_imx_uart();
qong_init_nor_mtd();
qong_init_fpga();
imx31_add_imx2_wdt();
}
@ -268,5 +267,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
.init_irq = mx31_init_irq,
.init_time = qong_timer_init,
.init_machine = qong_init,
.init_late = qong_init_fpga,
.restart = mxc_restart,
MACHINE_END

29
arch/arm/mach-imx/mach-vpr200.c
View File

@ -268,6 +268,22 @@ static void __init vpr200_board_init(void)
imx35_add_fec(NULL);
imx35_add_imx2_wdt();
imx35_add_imx_uart0(NULL);
imx35_add_imx_uart2(NULL);
imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_mxc_ehci_hs(&usb_host_pdata);
imx35_add_mxc_nand(&vpr200_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
}
static void __init vpr200_late_init(void)
{
imx_add_gpio_keys(&vpr200_gpio_keys_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
@ -282,18 +298,6 @@ static void __init vpr200_board_init(void)
else
gpio_direction_input(GPIO_PMIC_INT);
imx35_add_imx_uart0(NULL);
imx35_add_imx_uart2(NULL);
imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_mxc_ehci_hs(&usb_host_pdata);
imx35_add_mxc_nand(&vpr200_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, vpr200_i2c_devices,
ARRAY_SIZE(vpr200_i2c_devices));
@ -313,5 +317,6 @@ MACHINE_START(VPR200, "VPR200")
.init_irq = mx35_init_irq,
.init_time = vpr200_timer_init,
.init_machine = vpr200_board_init,
.init_late = vpr200_late_init,
.restart = mxc_restart,
MACHINE_END

20
arch/arm/mach-imx/mx31lilly-db.c
View File

@ -43,18 +43,6 @@
*/
static unsigned int lilly_db_board_pins[] __initdata = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
MX31_PIN_CTS2__CTS2,
MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
MX31_PIN_CSPI3_MOSI__RXD3,
MX31_PIN_CSPI3_MISO__TXD3,
MX31_PIN_CSPI3_SCLK__RTS3,
MX31_PIN_CSPI3_SPI_RDY__CTS3,
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1,
@ -86,11 +74,6 @@ static unsigned int lilly_db_board_pins[] __initdata = {
MX31_PIN_CONTRAST__CONTRAST,
};
/* UART */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* MMC support */
static int mxc_mmc1_get_ro(struct device *dev)
@ -203,9 +186,6 @@ void __init mx31lilly_db_init(void)
mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
ARRAY_SIZE(lilly_db_board_pins),
"development board pins");
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
imx31_add_mxc_mmc(0, &mmc_pdata);
mx31lilly_init_fb();
}

33
arch/arm/mach-imx/mx31lite-db.c
View File

@ -45,19 +45,6 @@
*/
static unsigned int litekit_db_board_pins[] __initdata = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* SPI 0 */
MX31_PIN_CSPI1_SCLK__SCLK,
MX31_PIN_CSPI1_MOSI__MOSI,
MX31_PIN_CSPI1_MISO__MISO,
MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* SDHC1 */
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_DATA1__SD1_DATA1,
@ -67,11 +54,6 @@ static unsigned int litekit_db_board_pins[] __initdata = {
MX31_PIN_SD1_CMD__SD1_CMD,
};
/* UART */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* MMC */
static int gpio_det, gpio_wp;
@ -146,19 +128,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = {
.exit = mxc_mmc1_exit,
};
/* SPI */
static int spi_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
static const struct spi_imx_master spi0_pdata __initconst = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
/* GPIO LEDs */
static const struct gpio_led litekit_leds[] __initconst = {
@ -187,9 +156,7 @@ void __init mx31lite_db_init(void)
mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
ARRAY_SIZE(litekit_db_board_pins),
"development board pins");
imx31_add_imx_uart0(&uart_pdata);
imx31_add_mxc_mmc(0, &mmc_pdata);
imx31_add_spi_imx0(&spi0_pdata);
gpio_led_register_device(-1, &litekit_led_platform_data);
imx31_add_imx2_wdt();
imx31_add_mxc_rtc();

8
arch/arm/mach-imx/pm-imx6.c
View File

@ -217,7 +217,7 @@ struct imx6_cpu_pm_info {
u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
} __aligned(8);
void imx6q_set_int_mem_clk_lpm(bool enable)
void imx6_set_int_mem_clk_lpm(bool enable)
{
u32 val = readl_relaxed(ccm_base + CGPR);
@ -367,7 +367,7 @@ static int imx6q_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_STANDBY:
imx6_set_lpm(STOP_POWER_ON);
imx6q_set_int_mem_clk_lpm(true);
imx6_set_int_mem_clk_lpm(true);
imx_gpc_pre_suspend(false);
if (cpu_is_imx6sl())
imx6sl_set_wait_clk(true);
@ -380,7 +380,7 @@ static int imx6q_pm_enter(suspend_state_t state)
break;
case PM_SUSPEND_MEM:
imx6_set_lpm(STOP_POWER_OFF);
imx6q_set_int_mem_clk_lpm(false);
imx6_set_int_mem_clk_lpm(false);
imx6q_enable_wb(true);
/*
* For suspend into ocram, asm code already take care of
@ -398,7 +398,7 @@ static int imx6q_pm_enter(suspend_state_t state)
imx_gpc_post_resume();
imx6_enable_rbc(false);
imx6q_enable_wb(false);
imx6q_set_int_mem_clk_lpm(true);
imx6_set_int_mem_clk_lpm(true);
imx6_set_lpm(WAIT_CLOCKED);
break;
default:

9
arch/arm/mach-mv78xx0/common.c
View File

@ -219,7 +219,6 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
NO_IRQ,
MV643XX_TX_CSUM_DEFAULT_LIMIT);
}
@ -242,9 +241,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
eth_data->duplex = DUPLEX_FULL;
}
orion_ge10_init(eth_data,
GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
NO_IRQ);
orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM);
}
@ -266,9 +263,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
eth_data->duplex = DUPLEX_FULL;
}
orion_ge11_init(eth_data,
GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
NO_IRQ);
orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM);
}
/*****************************************************************************

4
arch/arm/mach-orion5x/common.c
View File

@ -105,9 +105,9 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
/*****************************************************************************
* Ethernet switch
****************************************************************************/
void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
{
orion_ge00_switch_init(d, irq);
orion_ge00_switch_init(d);
}

2
arch/arm/mach-orion5x/common.h
View File

@ -41,7 +41,7 @@ void orion5x_setup_wins(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq);
void orion5x_eth_switch_init(struct dsa_platform_data *d);
void orion5x_i2c_init(void);
void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
void orion5x_spi_init(void);

4
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
View File

@ -101,7 +101,7 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
.port_names[7] = "lan3",
};
static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f5181l_fxo_switch_chip_data,
};
@ -120,7 +120,7 @@ static void __init rd88f5181l_fxo_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_fxo_eth_data);
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

5
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
View File

@ -102,7 +102,7 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
.port_names[7] = "lan3",
};
static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f5181l_ge_switch_chip_data,
};
@ -125,8 +125,7 @@ static void __init rd88f5181l_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_ge_eth_data);
orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
gpio_to_irq(8));
orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
orion5x_i2c_init();
orion5x_uart0_init();

6
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
View File

@ -40,7 +40,7 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
.port_names[5] = "cpu",
};
static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f6183ap_ge_switch_chip_data,
};
@ -71,7 +71,6 @@ static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &rd88f6183ap_ge_spi_slave_data,
.irq = NO_IRQ,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
@ -90,8 +89,7 @@ static void __init rd88f6183ap_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f6183ap_ge_eth_data);
orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
gpio_to_irq(3));
orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
orion5x_spi_init();

4
arch/arm/mach-orion5x/wnr854t-setup.c
View File

@ -106,7 +106,7 @@ static struct dsa_chip_data wnr854t_switch_chip_data = {
.port_names[7] = "lan2",
};
static struct dsa_platform_data wnr854t_switch_plat_data = {
static struct dsa_platform_data __initdata wnr854t_switch_plat_data = {
.nr_chips = 1,
.chip = &wnr854t_switch_chip_data,
};
@ -124,7 +124,7 @@ static void __init wnr854t_init(void)
* Configure peripherals.
*/
orion5x_eth_init(&wnr854t_eth_data);
orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
orion5x_eth_switch_init(&wnr854t_switch_plat_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

4
arch/arm/mach-orion5x/wrt350n-v2-setup.c
View File

@ -191,7 +191,7 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
.port_names[7] = "lan4",
};
static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
.nr_chips = 1,
.chip = &wrt350n_v2_switch_chip_data,
};
@ -210,7 +210,7 @@ static void __init wrt350n_v2_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&wrt350n_v2_eth_data);
orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

11
arch/arm/mach-pxa/Kconfig
View File

@ -4,6 +4,17 @@ menu "Intel PXA2xx/PXA3xx Implementations"
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config MACH_PXA25X_DT
bool "Support PXA25x platforms from device tree"
select PINCTRL
select POWER_SUPPLY
select PXA25x
select USE_OF
help
Include support for Marvell PXA25x based platforms using
the device tree. Needn't select any other machine while
MACH_PXA25x_DT is enabled.
config MACH_PXA27X_DT
bool "Support PXA27x platforms from device tree"
select PINCTRL

3
arch/arm/mach-pxa/Makefile
View File

@ -19,8 +19,9 @@ obj-$(CONFIG_CPU_PXA930) += pxa930.o
# NOTE: keep the order of boards in accordance to their order in Kconfig
# Device Tree support
obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o
obj-$(CONFIG_MACH_PXA25X_DT) += pxa-dt.o
obj-$(CONFIG_MACH_PXA27X_DT) += pxa-dt.o
obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o
# Intel/Marvell Dev Platforms
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o

13
arch/arm/mach-pxa/corgi_pm.c
View File

@ -131,16 +131,11 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
return is_resume;
}
static unsigned long corgi_charger_wakeup(void)
static bool corgi_charger_wakeup(void)
{
unsigned long ret;
ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
| (!gpio_get_value(CORGI_GPIO_KEY_INT)
<< GPIO_bit(CORGI_GPIO_KEY_INT))
| (!gpio_get_value(CORGI_GPIO_WAKEUP)
<< GPIO_bit(CORGI_GPIO_WAKEUP));
return ret;
return !gpio_get_value(CORGI_GPIO_AC_IN) ||
!gpio_get_value(CORGI_GPIO_KEY_INT) ||
!gpio_get_value(CORGI_GPIO_WAKEUP);
}
unsigned long corgipm_read_devdata(int type)

1
arch/arm/mach-pxa/devices.h
View File

@ -54,3 +54,4 @@ extern struct platform_device pxa3xx_device_gpio;
extern struct platform_device pxa93x_device_gpio;
void __init pxa_register_device(struct platform_device *dev, void *data);
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);

2
arch/arm/mach-pxa/generic.h
View File

@ -33,14 +33,12 @@ extern void __init pxa26x_init_irq(void);
#define pxa27x_handle_irq ichp_handle_irq
extern int __init pxa27x_clocks_init(void);
extern void __init pxa27x_dt_init_irq(void);
extern unsigned pxa27x_get_clk_frequency_khz(int);
extern void __init pxa27x_init_irq(void);
extern void __init pxa27x_map_io(void);
#define pxa3xx_handle_irq ichp_handle_irq
extern int __init pxa3xx_clocks_init(void);
extern void __init pxa3xx_dt_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa3xx_map_io(void);

1
arch/arm/mach-pxa/include/mach/dma.h
View File

@ -17,5 +17,4 @@
/* DMA Controller Registers Definitions */
#define DMAC_REGS_VIRT io_p2v(0x40000000)
#include <plat/dma.h>
#endif /* _ASM_ARCH_DMA_H */

4
arch/arm/mach-pxa/magician.c
View File

@ -121,10 +121,6 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO107_GPIO, /* DS1WM_IRQ */
GPIO108_GPIO, /* GSM_READY */
GPIO115_GPIO, /* nPEN_IRQ */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
};
/*

5
arch/arm/mach-pxa/pm.c
View File

@ -104,8 +104,9 @@ static int __init pxa_pm_init(void)
return -EINVAL;
}
sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
GFP_KERNEL);
sleep_save = kmalloc_array(pxa_cpu_pm_fns->save_count,
sizeof(*sleep_save),
GFP_KERNEL);
if (!sleep_save) {
printk(KERN_ERR "failed to alloc memory for pm save\n");
return -ENOMEM;

43
arch/arm/mach-pxa/pxa-dt.c
View File

@ -18,6 +18,32 @@
#include "generic.h"
#ifdef CONFIG_PXA25x
static const char * const pxa25x_dt_board_compat[] __initconst = {
"marvell,pxa250",
NULL,
};
DT_MACHINE_START(PXA25X_DT, "Marvell PXA25x (Device Tree Support)")
.map_io = pxa25x_map_io,
.restart = pxa_restart,
.dt_compat = pxa25x_dt_board_compat,
MACHINE_END
#endif
#ifdef CONFIG_PXA27x
static const char * const pxa27x_dt_board_compat[] __initconst = {
"marvell,pxa270",
NULL,
};
DT_MACHINE_START(PXA27X_DT, "Marvell PXA27x (Device Tree Support)")
.map_io = pxa27x_map_io,
.restart = pxa_restart,
.dt_compat = pxa27x_dt_board_compat,
MACHINE_END
#endif
#ifdef CONFIG_PXA3xx
static const char *const pxa3xx_dt_board_compat[] __initconst = {
"marvell,pxa300",
@ -28,24 +54,7 @@ static const char *const pxa3xx_dt_board_compat[] __initconst = {
DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_dt_init_irq,
.handle_irq = pxa3xx_handle_irq,
.restart = pxa_restart,
.dt_compat = pxa3xx_dt_board_compat,
MACHINE_END
#endif
#ifdef CONFIG_PXA27x
static const char * const pxa27x_dt_board_compat[] __initconst = {
"marvell,pxa270",
NULL,
};
DT_MACHINE_START(PXA27X_DT, "Marvell PXA2xx (Device Tree Support)")
.map_io = pxa27x_map_io,
.init_irq = pxa27x_dt_init_irq,
.handle_irq = pxa27x_handle_irq,
.restart = pxa_restart,
.dt_compat = pxa27x_dt_board_compat,
MACHINE_END
#endif

26
arch/arm/mach-pxa/pxa25x.c
View File

@ -25,6 +25,7 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
@ -151,6 +152,16 @@ void __init pxa26x_init_irq(void)
}
#endif
static int __init __init
pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
{
pxa_dt_irq_init(pxa25x_set_wake);
set_handle_irq(ichp_handle_irq);
return 0;
}
IRQCHIP_DECLARE(pxa25x_intc, "marvell,pxa-intc", pxa25x_dt_init_irq);
static struct map_desc pxa25x_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
@ -198,20 +209,17 @@ static int __init pxa25x_init(void)
reset_status = RCSR;
if ((ret = pxa_init_dma(IRQ_DMA, 16)))
return ret;
pxa25x_init_pm();
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
pxa2xx_set_dmac_info(16, 40);
pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
if (ret)
return ret;
if (!of_have_populated_dt()) {
pxa2xx_set_dmac_info(16, 40);
pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
}
}
return ret;

14
arch/arm/mach-pxa/pxa27x.c
View File

@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@ -233,11 +234,15 @@ void __init pxa27x_init_irq(void)
pxa_init_irq(34, pxa27x_set_wake);
}
void __init pxa27x_dt_init_irq(void)
static int __init
pxa27x_dt_init_irq(struct device_node *node, struct device_node *parent)
{
if (IS_ENABLED(CONFIG_OF))
pxa_dt_irq_init(pxa27x_set_wake);
pxa_dt_irq_init(pxa27x_set_wake);
set_handle_irq(ichp_handle_irq);
return 0;
}
IRQCHIP_DECLARE(pxa27x_intc, "marvell,pxa-intc", pxa27x_dt_init_irq);
static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
@ -300,9 +305,6 @@ static int __init pxa27x_init(void)
reset_status = RCSR;
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa27x_init_pm();
register_syscore_ops(&pxa_irq_syscore_ops);

11
arch/arm/mach-pxa/pxa3xx.c
View File

@ -19,6 +19,7 @@
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/syscore_ops.h>
@ -356,11 +357,16 @@ void __init pxa3xx_init_irq(void)
}
#ifdef CONFIG_OF
void __init pxa3xx_dt_init_irq(void)
static int __init __init
pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
{
__pxa3xx_init_irq();
pxa_dt_irq_init(pxa3xx_set_wake);
set_handle_irq(ichp_handle_irq);
return 0;
}
IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
#endif /* CONFIG_OF */
static struct map_desc pxa3xx_io_desc[] __initdata = {
@ -438,9 +444,6 @@ static int __init pxa3xx_init(void)
*/
NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa3xx_init_pm();
register_syscore_ops(&pxa_irq_syscore_ops);

24
arch/arm/mach-pxa/pxa_cplds_irqs.c
View File

@ -41,30 +41,35 @@ static irqreturn_t cplds_irq_handler(int in_irq, void *d)
unsigned long pending;
unsigned int bit;
pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
do {
pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) {
generic_handle_irq(irq_find_mapping(fpga->irqdomain,
bit));
}
} while (pending);
return IRQ_HANDLED;
}
static void cplds_irq_mask_ack(struct irq_data *d)
static void cplds_irq_mask(struct irq_data *d)
{
struct cplds *fpga = irq_data_get_irq_chip_data(d);
unsigned int cplds_irq = irqd_to_hwirq(d);
unsigned int set, bit = BIT(cplds_irq);
unsigned int bit = BIT(cplds_irq);
fpga->irq_mask &= ~bit;
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
set = readl(fpga->base + FPGA_IRQ_SET_CLR);
writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
}
static void cplds_irq_unmask(struct irq_data *d)
{
struct cplds *fpga = irq_data_get_irq_chip_data(d);
unsigned int cplds_irq = irqd_to_hwirq(d);
unsigned int bit = BIT(cplds_irq);
unsigned int set, bit = BIT(cplds_irq);
set = readl(fpga->base + FPGA_IRQ_SET_CLR);
writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
fpga->irq_mask |= bit;
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
@ -72,7 +77,8 @@ static void cplds_irq_unmask(struct irq_data *d)
static struct irq_chip cplds_irq_chip = {
.name = "pxa_cplds",
.irq_mask_ack = cplds_irq_mask_ack,
.irq_ack = cplds_irq_mask,
.irq_mask = cplds_irq_mask,
.irq_unmask = cplds_irq_unmask,
.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
};

2
arch/arm/mach-pxa/sharpsl_pm.c
View File

@ -744,7 +744,7 @@ static int sharpsl_off_charge_battery(void)
time = RCNR;
while (1) {
/* Check if any wakeup event had occurred */
if (sharpsl_pm.machinfo->charger_wakeup() != 0)
if (sharpsl_pm.machinfo->charger_wakeup())
return 0;
/* Check for timeout */
if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)

2
arch/arm/mach-pxa/sharpsl_pm.h
View File

@ -34,7 +34,7 @@ struct sharpsl_charger_machinfo {
#define SHARPSL_STATUS_LOCK 5
#define SHARPSL_STATUS_CHRGFULL 6
#define SHARPSL_STATUS_FATAL 7
unsigned long (*charger_wakeup)(void);
bool (*charger_wakeup)(void);
int (*should_wakeup)(unsigned int resume_on_alarm);
void (*backlight_limit)(int);
int (*backlight_get_status) (void);

9
arch/arm/mach-pxa/spitz_pm.c
View File

@ -165,13 +165,10 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
return is_resume;
}
static unsigned long spitz_charger_wakeup(void)
static bool spitz_charger_wakeup(void)
{
unsigned long ret;
ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
<< GPIO_bit(SPITZ_GPIO_KEY_INT))
| gpio_get_value(SPITZ_GPIO_SYNC));
return ret;
return !gpio_get_value(SPITZ_GPIO_KEY_INT) ||
gpio_get_value(SPITZ_GPIO_SYNC);
}
unsigned long spitzpm_read_devdata(int type)

1
arch/arm/mach-qcom/Makefile
View File

@ -1,2 +1 @@
obj-y := board.o
obj-$(CONFIG_SMP) += platsmp.o

31
arch/arm/mach-qcom/board.c
View File

@ -1,31 +0,0 @@
/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <asm/mach/arch.h>
static const char * const qcom_dt_match[] __initconst = {
"qcom,apq8064",
"qcom,apq8074-dragonboard",
"qcom,apq8084",
"qcom,ipq8062",
"qcom,ipq8064",
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
"qcom,mdm9615",
NULL
};
DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
.dt_compat = qcom_dt_match,
MACHINE_END

20
arch/arm/mach-s3c24xx/common.c
View File

@ -21,7 +21,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@ -305,6 +305,8 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
},
};
#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
static struct resource s3c2410_dma_resource[] = {
@ -355,7 +357,9 @@ struct platform_device s3c2410_device_dma = {
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2410_dma_platdata,
.dma_mask = &s3c24xx_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s3c2410_dma_platdata,
},
};
#endif
@ -396,7 +400,9 @@ struct platform_device s3c2412_device_dma = {
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2412_dma_platdata,
.dma_mask = &s3c24xx_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s3c2412_dma_platdata,
},
};
#endif
@ -486,7 +492,9 @@ struct platform_device s3c2440_device_dma = {
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2440_dma_platdata,
.dma_mask = &s3c24xx_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s3c2440_dma_platdata,
},
};
#endif
@ -538,7 +546,9 @@ struct platform_device s3c2443_device_dma = {
.num_resources = ARRAY_SIZE(s3c2443_dma_resource),
.resource = s3c2443_dma_resource,
.dev = {
.platform_data = &s3c2443_dma_platdata,
.dma_mask = &s3c24xx_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s3c2443_dma_platdata,
},
};
#endif

1
arch/arm/mach-s3c24xx/mach-mini2440.c
View File

@ -535,6 +535,7 @@ static struct platform_device *mini2440_devices[] __initdata = {
&mini2440_button_device,
&s3c_device_nand,
&s3c_device_sdi,
&s3c2440_device_dma,
&s3c_device_iis,
&uda1340_codec,
&mini2440_audio,

3
arch/arm/mach-s3c64xx/mach-crag6410-module.c
View File

@ -393,8 +393,7 @@ static const struct i2c_device_id wlf_gf_module_id[] = {
static struct i2c_driver wlf_gf_module_driver = {
.driver = {
.name = "wlf-gf-module",
.owner = THIS_MODULE,
.name = "wlf-gf-module"
},
.probe = wlf_gf_module_probe,
.id_table = wlf_gf_module_id,

2
arch/arm/mach-shmobile/setup-r8a7790.c
View File

@ -28,7 +28,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.smp_init = shmobile_smp_init_fallback_ops,
.smp_init = smp_init_ops(shmobile_smp_init_fallback_ops),
.smp = smp_ops(r8a7790_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,

2
arch/arm/mach-shmobile/setup-r8a7791.c
View File

@ -29,7 +29,7 @@ static const char *const r8a7791_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
.smp_init = shmobile_smp_init_fallback_ops,
.smp_init = smp_init_ops(shmobile_smp_init_fallback_ops),
.smp = smp_ops(r8a7791_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,

1
arch/arm/mach-sunxi/Kconfig
View File

@ -32,6 +32,7 @@ config MACH_SUN7I
default ARCH_SUNXI
select ARM_GIC
select ARM_PSCI
select ARCH_SUPPORTS_BIG_ENDIAN
select HAVE_ARM_ARCH_TIMER
select SUN5I_HSTIMER

1
arch/arm/mach-sunxi/sunxi.c
View File

@ -22,6 +22,7 @@ static const char * const sunxi_board_dt_compat[] = {
"allwinner,sun5i-a10s",
"allwinner,sun5i-a13",
"allwinner,sun5i-r8",
"nextthing,gr8",
NULL,
};

2
arch/arm/mach-uniphier/Makefile
View File

@ -1 +1 @@
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj- += dummy.o

43
arch/arm/mach-uniphier/headsmp.S
View File

@ -1,43 +0,0 @@
/*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/cp15.h>
ENTRY(uniphier_smp_trampoline)
ARM_BE8(setend be) @ ensure we are in BE8 mode
mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Reg)
and r2, r0, #0x3 @ CPU ID
ldr r1, uniphier_smp_trampoline_jump
ldr r3, uniphier_smp_trampoline_poll_addr
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
orr r0, r0, #CR_I @ Enable ICache
bic r0, r0, #(CR_C | CR_M) @ Disable MMU and Dcache
mcr p15, 0, r0, c1, c0, 0
b 1f @ cache the following 5 instructions
0: wfe
1: ldr r0, [r3]
cmp r0, r2
bxeq r1 @ branch to secondary_startup
b 0b
.globl uniphier_smp_trampoline_jump
uniphier_smp_trampoline_jump:
.word 0 @ set virt_to_phys(secondary_startup)
.globl uniphier_smp_trampoline_poll_addr
uniphier_smp_trampoline_poll_addr:
.word 0 @ set CPU ID to be kicked to this reg
.globl uniphier_smp_trampoline_end
uniphier_smp_trampoline_end:
ENDPROC(uniphier_smp_trampoline)

209
arch/arm/mach-uniphier/platsmp.c
View File

@ -1,209 +0,0 @@
/*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) "uniphier: " fmt
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/sizes.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-uniphier.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/smp_scu.h>
/*
* The secondary CPUs check this register from the boot ROM for the jump
* destination. After that, it can be reused as a scratch register.
*/
#define UNIPHIER_SMPCTRL_ROM_RSV2 0x208
static void __iomem *uniphier_smp_rom_boot_rsv2;
static unsigned int uniphier_smp_max_cpus;
extern char uniphier_smp_trampoline;
extern char uniphier_smp_trampoline_jump;
extern char uniphier_smp_trampoline_poll_addr;
extern char uniphier_smp_trampoline_end;
/*
* Copy trampoline code to the tail of the 1st section of the page table used
* in the boot ROM. This area is directly accessible by the secondary CPUs
* for all the UniPhier SoCs.
*/
static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE;
static phys_addr_t uniphier_smp_trampoline_dest;
static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr)
{
size_t trmp_size;
static void __iomem *trmp_base;
if (!uniphier_cache_l2_is_enabled()) {
pr_warn("outer cache is needed for SMP, but not enabled\n");
return -ENODEV;
}
uniphier_cache_l2_set_locked_ways(1);
outer_flush_all();
trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline;
uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end -
trmp_size;
uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest,
uniphier_smp_trampoline_dest_end);
trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size);
if (!trmp_base) {
pr_err("failed to map trampoline destination area\n");
return -ENOMEM;
}
memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size);
writel(virt_to_phys(secondary_startup),
trmp_base + (&uniphier_smp_trampoline_jump -
&uniphier_smp_trampoline));
writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr -
&uniphier_smp_trampoline));
flush_cache_all(); /* flush out trampoline code to outer cache */
iounmap(trmp_base);
return 0;
}
static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
{
struct device_node *np;
struct resource res;
phys_addr_t rom_rsv2_phys;
int ret;
np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
ret = of_address_to_resource(np, 0, &res);
of_node_put(np);
if (ret) {
pr_err("failed to get resource of SMP control\n");
return ret;
}
rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
if (ret)
return ret;
uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
if (!uniphier_smp_rom_boot_rsv2) {
pr_err("failed to map ROM_BOOT_RSV2 register\n");
return -ENOMEM;
}
writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2);
asm("sev"); /* Bring up all secondary CPUs to the trampoline code */
uniphier_smp_max_cpus = max_cpus; /* save for later use */
return 0;
}
static void __init uniphier_smp_unprepare_trampoline(void)
{
iounmap(uniphier_smp_rom_boot_rsv2);
if (uniphier_smp_trampoline_dest)
outer_inv_range(uniphier_smp_trampoline_dest,
uniphier_smp_trampoline_dest_end);
uniphier_cache_l2_set_locked_ways(0);
}
static int __init uniphier_smp_enable_scu(void)
{
unsigned long scu_base_phys = 0;
void __iomem *scu_base;
if (scu_a9_has_base())
scu_base_phys = scu_a9_get_base();
if (!scu_base_phys) {
pr_err("failed to get scu base\n");
return -ENODEV;
}
scu_base = ioremap(scu_base_phys, SZ_128);
if (!scu_base) {
pr_err("failed to map scu base\n");
return -ENOMEM;
}
scu_enable(scu_base);
iounmap(scu_base);
return 0;
}
static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
{
static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
int ret;
ret = uniphier_smp_prepare_trampoline(max_cpus);
if (ret)
goto err;
ret = uniphier_smp_enable_scu();
if (ret)
goto err;
return;
err:
pr_warn("disabling SMP\n");
init_cpu_present(&only_cpu_0);
uniphier_smp_unprepare_trampoline();
}
static int __init uniphier_smp_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2))
return -EFAULT;
writel(cpu, uniphier_smp_rom_boot_rsv2);
readl(uniphier_smp_rom_boot_rsv2); /* relax */
asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */
if (cpu == uniphier_smp_max_cpus - 1) {
/* clean up resources if this is the last CPU */
uniphier_smp_unprepare_trampoline();
}
return 0;
}
static const struct smp_operations uniphier_smp_ops __initconst = {
.smp_prepare_cpus = uniphier_smp_prepare_cpus,
.smp_boot_secondary = uniphier_smp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
&uniphier_smp_ops);

63
arch/arm/mm/cache-uniphier.c
View File

@ -1,5 +1,6 @@
/*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -43,27 +44,15 @@
#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */
#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */
#define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */
#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21)
#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21)
#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21)
#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21)
#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17)
#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17)
#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17)
#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17)
#define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */
#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */
#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */
#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */
#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */
#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */
#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */
#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */
#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */
#define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */
#define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */
#define UNIPHIER_SSCOQMASK 0x254 /* Cache Operation Queue Address Mask */
#define UNIPHIER_SSCOQWN 0x258 /* Cache Operation Queue Way Number */
#define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/
#define UNIPHIER_SSCOPPQSEF_FE BIT(1)
#define UNIPHIER_SSCOPPQSEF_OE BIT(0)
@ -72,9 +61,6 @@
#define UNIPHIER_SSCOLPQS_EST BIT(1)
#define UNIPHIER_SSCOLPQS_QST BIT(0)
/* Is the touch/pre-fetch destination specified by ways? */
#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
/* Is the operation region specified by address range? */
#define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
@ -178,11 +164,6 @@ static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
}
/* set target ways if needed */
if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
writel_relaxed(data->way_locked_mask,
data->op_base + UNIPHIER_SSCOQWN);
} while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
(UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
@ -338,46 +319,8 @@ static void uniphier_cache_sync(void)
__uniphier_cache_sync(data);
}
int __init uniphier_cache_l2_is_enabled(void)
{
struct uniphier_cache_data *data;
data = list_first_entry_or_null(&uniphier_cache_list,
struct uniphier_cache_data, list);
if (!data)
return 0;
return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
UNIPHIER_SSCC_ON);
}
void __init uniphier_cache_l2_touch_range(unsigned long start,
unsigned long end)
{
struct uniphier_cache_data *data;
data = list_first_entry_or_null(&uniphier_cache_list,
struct uniphier_cache_data, list);
if (data)
__uniphier_cache_maint_range(data, start, end,
UNIPHIER_SSCOQM_TID_WAY |
UNIPHIER_SSCOQM_CM_TOUCH);
}
void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
{
struct uniphier_cache_data *data;
data = list_first_entry_or_null(&uniphier_cache_list,
struct uniphier_cache_data, list);
if (data)
__uniphier_cache_set_locked_ways(data, way_mask);
}
static const struct of_device_id uniphier_cache_match[] __initconst = {
{
.compatible = "socionext,uniphier-system-cache",
},
{ .compatible = "socionext,uniphier-system-cache" },
{ /* sentinel */ }
};

85
arch/arm/plat-orion/common.c
View File

@ -52,21 +52,27 @@ void __init orion_clkdev_init(struct clk *tclk)
static void fill_resources(struct platform_device *device,
struct resource *resources,
resource_size_t mapbase,
resource_size_t size,
unsigned int irq)
resource_size_t size)
{
device->resource = resources;
device->num_resources = 1;
resources[0].flags = IORESOURCE_MEM;
resources[0].start = mapbase;
resources[0].end = mapbase + size;
}
if (irq != NO_IRQ) {
device->num_resources++;
resources[1].flags = IORESOURCE_IRQ;
resources[1].start = irq;
resources[1].end = irq;
}
static void fill_resources_irq(struct platform_device *device,
struct resource *resources,
resource_size_t mapbase,
resource_size_t size,
unsigned int irq)
{
fill_resources(device, resources, mapbase, size);
device->num_resources++;
resources[1].flags = IORESOURCE_IRQ;
resources[1].start = irq;
resources[1].end = irq;
}
/*****************************************************************************
@ -93,7 +99,7 @@ static void __init uart_complete(
data->uartclk = uart_get_clk_rate(clk);
orion_uart->dev.platform_data = data;
fill_resources(orion_uart, resources, mapbase, 0xff, irq);
fill_resources_irq(orion_uart, resources, mapbase, 0xff, irq);
platform_device_register(orion_uart);
}
@ -305,8 +311,8 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned int tx_csum_limit)
{
fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
fill_resources(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
mapbase + 0x2000, SZ_16K - 1);
fill_resources_irq(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
mapbase + 0x2004, 0x84 - 1, irq_err);
orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge00_shared_data,
@ -354,11 +360,10 @@ static struct platform_device orion_ge01 = {
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
unsigned int tx_csum_limit)
{
fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
mapbase + 0x2000, SZ_16K - 1);
orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge01_shared_data,
orion_ge01_resources, irq, &orion_ge01_shared,
@ -404,11 +409,10 @@ static struct platform_device orion_ge10 = {
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err)
unsigned long irq)
{
fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
mapbase + 0x2000, SZ_16K - 1);
ge_complete(&orion_ge10_shared_data,
orion_ge10_resources, irq, &orion_ge10_shared,
NULL,
@ -453,11 +457,10 @@ static struct platform_device orion_ge11 = {
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err)
unsigned long irq)
{
fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
mapbase + 0x2000, SZ_16K - 1);
ge_complete(&orion_ge11_shared_data,
orion_ge11_resources, irq, &orion_ge11_shared,
NULL,
@ -467,37 +470,15 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
/*****************************************************************************
* Ethernet switch
****************************************************************************/
static struct resource orion_switch_resources[] = {
{
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device orion_switch_device = {
.name = "dsa",
.id = 0,
.num_resources = 0,
.resource = orion_switch_resources,
};
void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
void __init orion_ge00_switch_init(struct dsa_platform_data *d)
{
int i;
if (irq != NO_IRQ) {
orion_switch_resources[0].start = irq;
orion_switch_resources[0].end = irq;
orion_switch_device.num_resources = 1;
}
d->netdev = &orion_ge00.dev;
for (i = 0; i < d->nr_chips; i++)
d->chip[i].host_dev = &orion_ge_mvmdio.dev;
orion_switch_device.dev.platform_data = d;
platform_device_register(&orion_switch_device);
platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
}
/*****************************************************************************
@ -538,7 +519,7 @@ void __init orion_i2c_init(unsigned long mapbase,
unsigned long freq_m)
{
orion_i2c_pdata.freq_m = freq_m;
fill_resources(&orion_i2c, orion_i2c_resources, mapbase,
fill_resources_irq(&orion_i2c, orion_i2c_resources, mapbase,
SZ_32 - 1, irq);
platform_device_register(&orion_i2c);
}
@ -548,7 +529,7 @@ void __init orion_i2c_1_init(unsigned long mapbase,
unsigned long freq_m)
{
orion_i2c_1_pdata.freq_m = freq_m;
fill_resources(&orion_i2c_1, orion_i2c_1_resources, mapbase,
fill_resources_irq(&orion_i2c_1, orion_i2c_1_resources, mapbase,
SZ_32 - 1, irq);
platform_device_register(&orion_i2c_1);
}
@ -576,14 +557,14 @@ static struct platform_device orion_spi_1 = {
void __init orion_spi_init(unsigned long mapbase)
{
fill_resources(&orion_spi, &orion_spi_resources,
mapbase, SZ_512 - 1, NO_IRQ);
mapbase, SZ_512 - 1);
platform_device_register(&orion_spi);
}
void __init orion_spi_1_init(unsigned long mapbase)
{
fill_resources(&orion_spi_1, &orion_spi_1_resources,
mapbase, SZ_512 - 1, NO_IRQ);
mapbase, SZ_512 - 1);
platform_device_register(&orion_spi_1);
}
@ -741,7 +722,7 @@ void __init orion_ehci_init(unsigned long mapbase,
enum orion_ehci_phy_ver phy_version)
{
orion_ehci_data.phy_version = phy_version;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
fill_resources_irq(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
platform_device_register(&orion_ehci);
@ -765,7 +746,7 @@ static struct platform_device orion_ehci_1 = {
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq)
{
fill_resources(&orion_ehci_1, orion_ehci_1_resources,
fill_resources_irq(&orion_ehci_1, orion_ehci_1_resources,
mapbase, SZ_4K - 1, irq);
platform_device_register(&orion_ehci_1);
@ -789,7 +770,7 @@ static struct platform_device orion_ehci_2 = {
void __init orion_ehci_2_init(unsigned long mapbase,
unsigned long irq)
{
fill_resources(&orion_ehci_2, orion_ehci_2_resources,
fill_resources_irq(&orion_ehci_2, orion_ehci_2_resources,
mapbase, SZ_4K - 1, irq);
platform_device_register(&orion_ehci_2);
@ -819,7 +800,7 @@ void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
unsigned long irq)
{
orion_sata.dev.platform_data = sata_data;
fill_resources(&orion_sata, orion_sata_resources,
fill_resources_irq(&orion_sata, orion_sata_resources,
mapbase, 0x5000 - 1, irq);
platform_device_register(&orion_sata);
@ -849,7 +830,7 @@ void __init orion_crypto_init(unsigned long mapbase,
unsigned long sram_size,
unsigned long irq)
{
fill_resources(&orion_crypto, orion_crypto_resources,
fill_resources_irq(&orion_crypto, orion_crypto_resources,
mapbase, 0xffff, irq);
orion_crypto.num_resources = 3;
orion_crypto_resources[2].start = srambase;

10
arch/arm/plat-orion/include/plat/common.h
View File

@ -47,21 +47,17 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
unsigned int tx_csum_limit);
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err);
unsigned long irq);
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err);
unsigned long irq);
void __init orion_ge00_switch_init(struct dsa_platform_data *d,
int irq);
void __init orion_ge00_switch_init(struct dsa_platform_data *d);
void __init orion_i2c_init(unsigned long mapbase,
unsigned long irq,

2
arch/arm/plat-pxa/Makefile
View File

@ -3,8 +3,6 @@
#
ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
obj-$(CONFIG_ARCH_PXA) := dma.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o

386
arch/arm/plat-pxa/dma.c
View File

@ -1,386 +0,0 @@
/*
* linux/arch/arm/plat-pxa/dma.c
*
* PXA DMA registration and IRQ dispatching
*
* Author: Nicolas Pitre
* Created: Nov 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/memory.h>
#include <mach/hardware.h>
#include <mach/dma.h>
#define DMA_DEBUG_NAME "pxa_dma"
#define DMA_MAX_REQUESTERS 64
struct dma_channel {
char *name;
pxa_dma_prio prio;
void (*irq_handler)(int, void *);
void *data;
spinlock_t lock;
};
static struct dma_channel *dma_channels;
static int num_dma_channels;
/*
* Debug fs
*/
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/seq_file.h>
static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
static int dbg_show_requester_chan(struct seq_file *s, void *p)
{
int chan = (int)s->private;
int i;
u32 drcmr;
seq_printf(s, "DMA channel %d requesters list :\n", chan);
for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
drcmr = DRCMR(i);
if ((drcmr & DRCMR_CHLNUM) == chan)
seq_printf(s, "\tRequester %d (MAPVLD=%d)\n",
i, !!(drcmr & DRCMR_MAPVLD));
}
return 0;
}
static inline int dbg_burst_from_dcmd(u32 dcmd)
{
int burst = (dcmd >> 16) & 0x3;
return burst ? 4 << burst : 0;
}
static int is_phys_valid(unsigned long addr)
{
return pfn_valid(__phys_to_pfn(addr));
}
#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
static int dbg_show_descriptors(struct seq_file *s, void *p)
{
int chan = (int)s->private;
int i, max_show = 20, burst, width;
u32 dcmd;
unsigned long phys_desc;
struct pxa_dma_desc *desc;
unsigned long flags;
spin_lock_irqsave(&dma_channels[chan].lock, flags);
phys_desc = DDADR(chan);
seq_printf(s, "DMA channel %d descriptors :\n", chan);
seq_printf(s, "[%03d] First descriptor unknown\n", 0);
for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
desc = phys_to_virt(phys_desc);
dcmd = desc->dcmd;
burst = dbg_burst_from_dcmd(dcmd);
width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
i, phys_desc, desc);
seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
dcmd,
DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
DCMD_STR(ENDIAN), burst, width,
dcmd & DCMD_LENGTH);
phys_desc = desc->ddadr;
}
if (i == max_show)
seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
i, phys_desc);
else
seq_printf(s, "[%03d] Desc at %08lx is %s\n",
i, phys_desc, phys_desc == DDADR_STOP ?
"DDADR_STOP" : "invalid");
spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
return 0;
}
static int dbg_show_chan_state(struct seq_file *s, void *p)
{
int chan = (int)s->private;
u32 dcsr, dcmd;
int burst, width;
static char *str_prio[] = { "high", "normal", "low" };
dcsr = DCSR(chan);
dcmd = DCMD(chan);
burst = dbg_burst_from_dcmd(dcmd);
width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
seq_printf(s, "DMA channel %d\n", chan);
seq_printf(s, "\tPriority : %s\n", str_prio[dma_channels[chan].prio]);
seq_printf(s, "\tUnaligned transfer bit: %s\n",
DALGN & (1 << chan) ? "yes" : "no");
seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
dcmd,
DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
return 0;
}
static int dbg_show_state(struct seq_file *s, void *p)
{
/* basic device status */
seq_puts(s, "DMA engine status\n");
seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
return 0;
}
#define DBGFS_FUNC_DECL(name) \
static int dbg_open_##name(struct inode *inode, struct file *file) \
{ \
return single_open(file, dbg_show_##name, inode->i_private); \
} \
static const struct file_operations dbg_fops_##name = { \
.owner = THIS_MODULE, \
.open = dbg_open_##name, \
.llseek = seq_lseek, \
.read = seq_read, \
.release = single_release, \
}
DBGFS_FUNC_DECL(state);
DBGFS_FUNC_DECL(chan_state);
DBGFS_FUNC_DECL(descriptors);
DBGFS_FUNC_DECL(requester_chan);
static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
{
char chan_name[11];
struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
struct dentry *chan_reqs = NULL;
void *dt;
scnprintf(chan_name, sizeof(chan_name), "%d", ch);
chan = debugfs_create_dir(chan_name, chandir);
dt = (void *)ch;
if (chan)
chan_state = debugfs_create_file("state", 0400, chan, dt,
&dbg_fops_chan_state);
if (chan_state)
chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
&dbg_fops_descriptors);
if (chan_descr)
chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
&dbg_fops_requester_chan);
if (!chan_reqs)
goto err_state;
return chan;
err_state:
debugfs_remove_recursive(chan);
return NULL;
}
static void pxa_dma_init_debugfs(void)
{
int i;
struct dentry *chandir;
dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
if (IS_ERR(dbgfs_root) || !dbgfs_root)
goto err_root;
dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
&dbg_fops_state);
if (!dbgfs_state)
goto err_state;
dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
GFP_KERNEL);
if (!dbgfs_chan)
goto err_alloc;
chandir = debugfs_create_dir("channels", dbgfs_root);
if (!chandir)
goto err_chandir;
for (i = 0; i < num_dma_channels; i++) {
dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
if (!dbgfs_chan[i])
goto err_chans;
}
return;
err_chans:
err_chandir:
kfree(dbgfs_chan);
err_alloc:
err_state:
debugfs_remove_recursive(dbgfs_root);
err_root:
pr_err("pxa_dma: debugfs is not available\n");
}
static void __exit pxa_dma_cleanup_debugfs(void)
{
debugfs_remove_recursive(dbgfs_root);
}
#else
static inline void pxa_dma_init_debugfs(void) {}
static inline void pxa_dma_cleanup_debugfs(void) {}
#endif
int pxa_request_dma (char *name, pxa_dma_prio prio,
void (*irq_handler)(int, void *),
void *data)
{
unsigned long flags;
int i, found = 0;
/* basic sanity checks */
if (!name || !irq_handler)
return -EINVAL;
local_irq_save(flags);
do {
/* try grabbing a DMA channel with the requested priority */
for (i = 0; i < num_dma_channels; i++) {
if ((dma_channels[i].prio == prio) &&
!dma_channels[i].name &&
!pxad_toggle_reserved_channel(i)) {
found = 1;
break;
}
}
/* if requested prio group is full, try a hier priority */
} while (!found && prio--);
if (found) {
DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
dma_channels[i].name = name;
dma_channels[i].irq_handler = irq_handler;
dma_channels[i].data = data;
} else {
printk (KERN_WARNING "No more available DMA channels for %s\n", name);
i = -ENODEV;
}
local_irq_restore(flags);
return i;
}
EXPORT_SYMBOL(pxa_request_dma);
void pxa_free_dma (int dma_ch)
{
unsigned long flags;
if (!dma_channels[dma_ch].name) {
printk (KERN_CRIT
"%s: trying to free channel %d which is already freed\n",
__func__, dma_ch);
return;
}
local_irq_save(flags);
DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
dma_channels[dma_ch].name = NULL;
pxad_toggle_reserved_channel(dma_ch);
local_irq_restore(flags);
}
EXPORT_SYMBOL(pxa_free_dma);
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
int i, dint = DINT, done = 0;
struct dma_channel *channel;
while (dint) {
i = __ffs(dint);
dint &= (dint - 1);
channel = &dma_channels[i];
if (channel->name && channel->irq_handler) {
channel->irq_handler(i, channel->data);
done++;
}
}
if (done)
return IRQ_HANDLED;
else
return IRQ_NONE;
}
int __init pxa_init_dma(int irq, int num_ch)
{
int i, ret;
dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
if (dma_channels == NULL)
return -ENOMEM;
/* dma channel priorities on pxa2xx processors:
* ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH
* ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM
* ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW
*/
for (i = 0; i < num_ch; i++) {
DCSR(i) = 0;
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
spin_lock_init(&dma_channels[i].lock);
}
ret = request_irq(irq, dma_irq_handler, IRQF_SHARED, "DMA",
dma_channels);
if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
kfree(dma_channels);
return ret;
}
num_dma_channels = num_ch;
pxa_dma_init_debugfs();
return 0;
}

100
arch/arm/plat-pxa/include/plat/dma.h
View File

@ -1,100 +0,0 @@
#ifndef __PLAT_DMA_H
#define __PLAT_DMA_H
#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
#define DCSR(n) DMAC_REG((n) << 2)
#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */
#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */
#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4))
#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4))
#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4))
#define DCMD(n) DMAC_REG(0x020c + ((n) << 4))
#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
(((n) & 0x3f) << 2))
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
#define DDADR_STOP (1 << 0) /* Stop (read / write) */
#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
/*
* Descriptor structure for PXA's DMA engine
* Note: this structure must always be aligned to a 16-byte boundary.
*/
typedef struct pxa_dma_desc {
volatile u32 ddadr; /* Points to the next descriptor + flags */
volatile u32 dsadr; /* DSADR value for the current transfer */
volatile u32 dtadr; /* DTADR value for the current transfer */
volatile u32 dcmd; /* DCMD value for the current transfer */
} pxa_dma_desc;
typedef enum {
DMA_PRIO_HIGH = 0,
DMA_PRIO_MEDIUM = 1,
DMA_PRIO_LOW = 2
} pxa_dma_prio;
/*
* DMA registration
*/
int __init pxa_init_dma(int irq, int num_ch);
int pxa_request_dma (char *name,
pxa_dma_prio prio,
void (*irq_handler)(int, void *),
void *data);
void pxa_free_dma (int dma_ch);
/*
* Cooperation with pxa_dma + dmaengine while there remains at least one pxa
* driver not converted to dmaengine.
*/
#if defined(CONFIG_PXA_DMA)
extern int pxad_toggle_reserved_channel(int legacy_channel);
#else
static inline int pxad_toggle_reserved_channel(int legacy_channel)
{
return 0;
}
#endif
extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
#endif /* __PLAT_DMA_H */

4
arch/arm/plat-samsung/include/plat/map-s5p.h
View File

@ -14,10 +14,6 @@
#define __ASM_PLAT_MAP_S5P_H __FILE__
#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
#define S5P_VA_CMU S3C_ADDR(0x02100000)
#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))