redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge remote-tracking branches 'regulator/topic/act8865', 'regulator/topic/anatop', 'regulator/topic/arizona', 'regulator/topic/axp20x' and 'regulator/topic/bcm590xx' into regulator-next

hifive-unleashed-5.1
Mark Brown 2015-11-04 11:19:37 +00:00
parent 5408dd8f09 1f37cbe2a2 0d19208e70 afafcdd3ff 7118f19c4c f3f400e760
commit 6727479f07
10 changed files with 116 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/mfd/axp20x.txt
View File

@ -60,8 +60,8 @@ DCDC2 : DC-DC buck : vin2-supply
DCDC3 : DC-DC buck : vin3-supply
DCDC4 : DC-DC buck : vin4-supply
DCDC5 : DC-DC buck : vin5-supply
DC1SW : On/Off Switch : dcdc1-supply : DCDC1 secondary output
DC5LDO : LDO : dcdc5-supply : input from DCDC5
DC1SW : On/Off Switch : : DCDC1 secondary output
DC5LDO : LDO : : input from DCDC5
ALDO1 : LDO : aldoin-supply : shared supply
ALDO2 : LDO : aldoin-supply : shared supply
ALDO3 : LDO : aldoin-supply : shared supply

3
Documentation/devicetree/bindings/regulator/act8865-regulator.txt
View File

@ -8,6 +8,8 @@ Required properties:
Optional properties:
- system-power-controller: Telling whether or not this pmic is controlling
the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
- active-semi,vsel-high: Indicates the VSEL pin is high.
If this property is missing, assume the VSEL pin is low(0).
Optional input supply properties:
- for act8600:
@ -49,6 +51,7 @@ Example:
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
active-semi,vsel-high;
status = "disabled";
regulators {

1
Documentation/devicetree/bindings/regulator/anatop-regulator.txt
View File

@ -13,6 +13,7 @@ Optional properties:
- anatop-delay-reg-offset: Anatop MFD step time register offset
- anatop-delay-bit-shift: Bit shift for the step time register
- anatop-delay-bit-width: Number of bits used in the step time register
- vin-supply: The supply for this regulator
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.

17
Documentation/devicetree/bindings/regulator/arizona-regulator.txt 100644
View File

@ -0,0 +1,17 @@
Cirrus Logic Arizona class audio SoCs
These devices are audio SoCs with extensive digital capabilities and a range
of analogue I/O.
This document lists regulator specific bindings, see the primary binding
document:
../mfd/arizona.txt
Optional properties:
- wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
Optional subnodes:
- ldo1 : Initial data for the LDO1 regulator, as covered in
Documentation/devicetree/bindings/regulator/regulator.txt
- micvdd : Initial data for the MICVDD regulator, as covered in
Documentation/devicetree/bindings/regulator/regulator.txt

24
drivers/regulator/act8865-regulator.c
View File

@ -261,6 +261,16 @@ static const struct regulator_desc act8865_regulators[] = {
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
};
static const struct regulator_desc act8865_alt_regulators[] = {
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
};
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
@ -413,6 +423,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
struct act8865 *act8865;
unsigned long type;
int off_reg, off_mask;
int voltage_select = 0;
pdata = dev_get_platdata(dev);
@ -424,6 +435,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
return -ENODEV;
type = (unsigned long) id->data;
voltage_select = !!of_get_property(dev->of_node,
"active-semi,vsel-high",
NULL);
} else {
type = i2c_id->driver_data;
}
@ -442,8 +457,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
off_mask = ACT8846_OFF_SYSMASK;
break;
case ACT8865:
regulators = act8865_regulators;
num_regulators = ARRAY_SIZE(act8865_regulators);
if (voltage_select) {
regulators = act8865_alt_regulators;
num_regulators = ARRAY_SIZE(act8865_alt_regulators);
} else {
regulators = act8865_regulators;
num_regulators = ARRAY_SIZE(act8865_regulators);
}
off_reg = ACT8865_SYS_CTRL;
off_mask = ACT8865_MSTROFF;
break;

3
drivers/regulator/anatop-regulator.c
View File

@ -30,6 +30,7 @@
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/machine.h>
#define LDO_RAMP_UP_UNIT_IN_CYCLES 64 /* 64 cycles per step */
#define LDO_RAMP_UP_FREQ_IN_MHZ 24 /* cycle based on 24M OSC */
@ -199,6 +200,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
rdesc->owner = THIS_MODULE;
initdata = of_get_regulator_init_data(dev, np, rdesc);
initdata->supply_regulator = "vin";
sreg->initdata = initdata;
anatop_np = of_get_parent(np);
@ -262,6 +264,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
rdesc->vsel_reg = sreg->control_reg;
rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
sreg->vol_bit_shift;
rdesc->min_dropout_uV = 125000;
config.dev = &pdev->dev;
config.init_data = initdata;

20
drivers/regulator/arizona-ldo1.c
View File

@ -17,6 +17,7 @@
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
@ -189,13 +190,22 @@ static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_ldo1 *ldo1 = config->driver_data;
struct device_node *np = arizona->dev->of_node;
struct device_node *init_node, *dcvdd_node;
struct regulator_init_data *init_data;
pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true);
pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0);
if (pdata->ldoena < 0) {
dev_warn(arizona->dev,
"LDOENA GPIO property missing/malformed: %d\n",
pdata->ldoena);
pdata->ldoena = 0;
} else {
config->ena_gpio_initialized = true;
}
init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1");
dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
init_node = of_get_child_by_name(np, "ldo1");
dcvdd_node = of_parse_phandle(np, "DCVDD-supply", 0);
if (init_node) {
config->of_node = init_node;
@ -245,6 +255,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
switch (arizona->type) {
case WM5102:
case WM8997:
case WM8998:
case WM1814:
desc = &arizona_ldo1_hc;
ldo1->init_data = arizona_ldo1_dvfs;
break;
@ -272,8 +284,6 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
if (ret < 0)
return ret;
config.ena_gpio_initialized = true;
}
}

54
drivers/regulator/axp20x-regulator.c
View File

@ -196,10 +196,10 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
/* secondary switchable output of DCDC1 */
AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100,
AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100,
AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
/* LDO regulator internally chained to DCDC5 */
AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dcdc5", 700, 1400, 100,
AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
@ -350,6 +350,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
};
int ret, i, nregulators;
u32 workmode;
const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
switch (axp20x->variant) {
case AXP202_ID:
@ -371,8 +373,37 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
axp20x_regulator_parse_dt(pdev);
for (i = 0; i < nregulators; i++) {
rdev = devm_regulator_register(&pdev->dev, &regulators[i],
&config);
const struct regulator_desc *desc = &regulators[i];
struct regulator_desc *new_desc;
/*
* Regulators DC1SW and DC5LDO are connected internally,
* so we have to handle their supply names separately.
*
* We always register the regulators in proper sequence,
* so the supply names are correctly read. See the last
* part of this loop to see where we save the DT defined
* name.
*/
if (regulators == axp22x_regulators) {
if (i == AXP22X_DC1SW) {
new_desc = devm_kzalloc(&pdev->dev,
sizeof(*desc),
GFP_KERNEL);
*new_desc = regulators[i];
new_desc->supply_name = axp22x_dc1_name;
desc = new_desc;
} else if (i == AXP22X_DC5LDO) {
new_desc = devm_kzalloc(&pdev->dev,
sizeof(*desc),
GFP_KERNEL);
*new_desc = regulators[i];
new_desc->supply_name = axp22x_dc5_name;
desc = new_desc;
}
}
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %s\n",
regulators[i].name);
@ -388,6 +419,21 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
rdev->desc->name);
}
/*
* Save AXP22X DCDC1 / DCDC5 regulator names for later.
*/
if (regulators == axp22x_regulators) {
/* Can we use rdev->constraints->name instead? */
if (i == AXP22X_DCDC1)
of_property_read_string(rdev->dev.of_node,
"regulator-name",
&axp22x_dc1_name);
else if (i == AXP22X_DCDC5)
of_property_read_string(rdev->dev.of_node,
"regulator-name",
&axp22x_dc5_name);
}
}
return 0;

2
drivers/regulator/bcm590xx-regulator.c
View File

@ -244,7 +244,7 @@ static int bcm590xx_get_enable_register(int id)
break;
case BCM590XX_REG_VBUS:
reg = BCM590XX_OTG_CTRL;
};
}
return reg;

2
include/linux/regulator/driver.h
View File

@ -245,6 +245,7 @@ enum regulator_type {
* @linear_min_sel: Minimal selector for starting linear mapping
* @fixed_uV: Fixed voltage of rails.
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
* @min_dropout_uV: The minimum dropout voltage this regulator can handle
* @linear_ranges: A constant table of possible voltage ranges.
* @n_linear_ranges: Number of entries in the @linear_ranges table.
* @volt_table: Voltage mapping table (if table based mapping)
@ -292,6 +293,7 @@ struct regulator_desc {
unsigned int linear_min_sel;
int fixed_uV;
unsigned int ramp_delay;
int min_dropout_uV;
const struct regulator_linear_range *linear_ranges;
int n_linear_ranges;