diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index b868739fcce2..eca90e5b036c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -63,6 +63,26 @@
 		};
 	};
 
+	edp: edp-connector {
+		/* Pine64 used 3 different panels in Pinebooks:
+		 * 14" 768p panel - boe,hb140wx1-501,
+		 * 11" 768p panel - innolux,n116bge,
+		 * 11" 1080p panel - neweast,wjfh116008a.
+		 * It's not really important what compatible to use here since bridge
+		 * driver will get modes from EDID nevertheless, so use boe compatible.
+		 * if EDID or AUX line is broken it's up to bootloader to fix it up.
+		 */
+		compatible = "boe,hb140wx1-501", "edp-connector";
+		backlight = <&backlight>;
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			edp_connector_in: endpoint {
+				remote-endpoint = <&anx6345_out_edp>;
+			};
+		};
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "c";
@@ -146,6 +166,10 @@
 	status = "okay";
 };
 
+&mixer0 {
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -197,6 +221,46 @@
 	status = "okay";
 };
 
+&r_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pins_a>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_fldo1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			anx6345_in: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				anx6345_in_tcon0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+
+			anx6345_out: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				anx6345_out_edp: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&edp_connector_in>;
+				};
+			};
+		};
+	};
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -372,6 +436,20 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&anx6345_in_tcon0>;
+	};
+};
+
 &ths {
 	status = "okay";
 };