Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits) USB: cdc-acm: Adding second ACM channel support for Nokia N8 USB, Mass Storage, composite, gadget: Fix build failure and memset of a struct USB: Fix trout build failure with ci13xxx_msm gadget USB: EHCI: fix scheduling while atomic during suspend USB: usb-storage: unusual_devs entry for Coby MP3 player USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrograph USB: fix race between root-hub resume and wakeup requests USB: prevent buggy hubs from crashing the USB stack usb: r8a66597-udc: Fixed bufnum of Bulk USB: ftdi_sio: add ST Micro Connect Lite uart support USB: Storage: Add unusual_devs entry for VTech Kidizoom USB SL811HS HCD: Fix memory leak in sl811h_urb_enqueue() USB: ti_usb: fix module removal USB: io_edgeport: fix the reported firmware major and minor usb: ehci-omap: Show fatal probing time errors to end user usb: musb: introduce api for dma code to check compatibility with usb request usb: musb: maintain three states for buffer mappings instead of two usb: musb: disable double buffering when it's broken usb: musb: hsdma: change back to use musb_read/writew usb: musb: core: fix IRQ check ...
This commit is contained in:
commit
67d019528e
|
@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = {
|
|||
{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
|
||||
{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
|
||||
{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
|
||||
{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
|
||||
{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
|
||||
|
||||
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
|
||||
|
|
|
@ -1955,7 +1955,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
|
|||
|
||||
dev_dbg(&rhdev->dev, "usb %s%s\n",
|
||||
(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
|
||||
clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
|
||||
if (!hcd->driver->bus_resume)
|
||||
return -ENOENT;
|
||||
if (hcd->state == HC_STATE_RUNNING)
|
||||
|
@ -1963,6 +1962,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
|
|||
|
||||
hcd->state = HC_STATE_RESUMING;
|
||||
status = hcd->driver->bus_resume(hcd);
|
||||
clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
|
||||
if (status == 0) {
|
||||
/* TRSMRCY = 10 msec */
|
||||
msleep(10);
|
||||
|
|
|
@ -2753,6 +2753,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
|
|||
udev->ttport = hdev->ttport;
|
||||
} else if (udev->speed != USB_SPEED_HIGH
|
||||
&& hdev->speed == USB_SPEED_HIGH) {
|
||||
if (!hub->tt.hub) {
|
||||
dev_err(&udev->dev, "parent hub has no TT\n");
|
||||
retval = -EINVAL;
|
||||
goto fail;
|
||||
}
|
||||
udev->tt = &hub->tt;
|
||||
udev->ttport = port1;
|
||||
}
|
||||
|
|
|
@ -546,6 +546,8 @@ config USB_GADGET_CI13XXX_MSM
|
|||
ci13xxx_udc core.
|
||||
This driver depends on OTG driver for PHY initialization,
|
||||
clock management, powering up VBUS, and power management.
|
||||
This driver is not supported on boards like trout which
|
||||
has an external PHY.
|
||||
|
||||
Say "y" to link the driver statically, or "m" to build a
|
||||
dynamically linked module called "ci13xxx_msm" and force all
|
||||
|
|
|
@ -293,6 +293,7 @@
|
|||
|
||||
#include <linux/usb/ch9.h>
|
||||
#include <linux/usb/gadget.h>
|
||||
#include <linux/usb/composite.h>
|
||||
|
||||
#include "gadget_chips.h"
|
||||
|
||||
|
@ -2763,7 +2764,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
|
|||
return ERR_PTR(-ENOMEM);
|
||||
common->free_storage_on_release = 1;
|
||||
} else {
|
||||
memset(common, 0, sizeof common);
|
||||
memset(common, 0, sizeof *common);
|
||||
common->free_storage_on_release = 0;
|
||||
}
|
||||
|
||||
|
|
|
@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct r8a66597 *r8a66597,
|
|||
break;
|
||||
case R8A66597_BULK:
|
||||
/* isochronous pipes may be used as bulk pipes */
|
||||
if (info->pipe > R8A66597_BASE_PIPENUM_BULK)
|
||||
if (info->pipe >= R8A66597_BASE_PIPENUM_BULK)
|
||||
bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
|
||||
else
|
||||
bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
|
||||
|
|
|
@ -151,6 +151,8 @@ config USB_EHCI_MSM
|
|||
Qualcomm chipsets. Root Hub has inbuilt TT.
|
||||
This driver depends on OTG driver for PHY initialization,
|
||||
clock management, powering up VBUS, and power management.
|
||||
This driver is not supported on boards like trout which
|
||||
has an external PHY.
|
||||
|
||||
config USB_EHCI_HCD_PPC_OF
|
||||
bool "EHCI support for PPC USB controller on OF platform bus"
|
||||
|
|
|
@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
|
|||
* mark HW unaccessible. The PM and USB cores make sure that
|
||||
* the root hub is either suspended or stopped.
|
||||
*/
|
||||
spin_lock_irqsave(&ehci->lock, flags);
|
||||
ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
|
||||
spin_lock_irqsave(&ehci->lock, flags);
|
||||
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
||||
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
|
||||
|
||||
|
|
|
@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
|
|||
{
|
||||
int port;
|
||||
u32 temp;
|
||||
unsigned long flags;
|
||||
|
||||
/* If remote wakeup is enabled for the root hub but disabled
|
||||
* for the controller, we must adjust all the port wakeup flags
|
||||
|
@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
|
|||
if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
|
||||
return;
|
||||
|
||||
spin_lock_irqsave(&ehci->lock, flags);
|
||||
|
||||
/* clear phy low-power mode before changing wakeup flags */
|
||||
if (ehci->has_hostpc) {
|
||||
port = HCS_N_PORTS(ehci->hcs_params);
|
||||
|
@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
|
|||
temp = ehci_readl(ehci, hostpc_reg);
|
||||
ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
|
||||
}
|
||||
spin_unlock_irqrestore(&ehci->lock, flags);
|
||||
msleep(5);
|
||||
spin_lock_irqsave(&ehci->lock, flags);
|
||||
}
|
||||
|
||||
port = HCS_N_PORTS(ehci->hcs_params);
|
||||
|
@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
|
|||
/* Does the root hub have a port wakeup pending? */
|
||||
if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
|
||||
usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
|
||||
|
||||
spin_unlock_irqrestore(&ehci->lock, flags);
|
||||
}
|
||||
|
||||
static int ehci_bus_suspend (struct usb_hcd *hcd)
|
||||
|
|
|
@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
|
|||
hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
|
||||
dev_name(&pdev->dev));
|
||||
if (!hcd) {
|
||||
dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
|
||||
dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret);
|
||||
ret = -ENOMEM;
|
||||
goto err_create_hcd;
|
||||
}
|
||||
|
@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
|
|||
|
||||
ret = omap_start_ehc(omap, hcd);
|
||||
if (ret) {
|
||||
dev_dbg(&pdev->dev, "failed to start ehci\n");
|
||||
dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret);
|
||||
goto err_start;
|
||||
}
|
||||
|
||||
|
@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
|
|||
|
||||
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
|
||||
if (ret) {
|
||||
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
|
||||
dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret);
|
||||
goto err_add_hcd;
|
||||
}
|
||||
|
||||
|
|
|
@ -367,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
|
|||
* mark HW unaccessible. The PM and USB cores make sure that
|
||||
* the root hub is either suspended or stopped.
|
||||
*/
|
||||
spin_lock_irqsave (&ehci->lock, flags);
|
||||
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
|
||||
spin_lock_irqsave (&ehci->lock, flags);
|
||||
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
||||
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
|
||||
|
||||
|
|
|
@ -861,6 +861,7 @@ static int sl811h_urb_enqueue(
|
|||
DBG("dev %d ep%d maxpacket %d\n",
|
||||
udev->devnum, epnum, ep->maxpacket);
|
||||
retval = -EINVAL;
|
||||
kfree(ep);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
|
|
|
@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb)
|
|||
musb->xceiv->set_power = bfin_musb_set_power;
|
||||
|
||||
musb->isr = blackfin_interrupt;
|
||||
musb->double_buffer_not_ok = true;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
|
|||
|
||||
static inline struct musb *dev_to_musb(struct device *dev)
|
||||
{
|
||||
#ifdef CONFIG_USB_MUSB_HDRC_HCD
|
||||
/* usbcore insists dev->driver_data is a "struct hcd *" */
|
||||
return hcd_to_musb(dev_get_drvdata(dev));
|
||||
#else
|
||||
return dev_get_drvdata(dev);
|
||||
#endif
|
||||
}
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
@ -1876,10 +1871,9 @@ allocate_instance(struct device *dev,
|
|||
musb = kzalloc(sizeof *musb, GFP_KERNEL);
|
||||
if (!musb)
|
||||
return NULL;
|
||||
dev_set_drvdata(dev, musb);
|
||||
|
||||
#endif
|
||||
|
||||
dev_set_drvdata(dev, musb);
|
||||
musb->mregs = mbase;
|
||||
musb->ctrl_base = mbase;
|
||||
musb->nIrq = -ENODEV;
|
||||
|
@ -2191,7 +2185,7 @@ static int __init musb_probe(struct platform_device *pdev)
|
|||
void __iomem *base;
|
||||
|
||||
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!iomem || irq == 0)
|
||||
if (!iomem || irq <= 0)
|
||||
return -ENODEV;
|
||||
|
||||
base = ioremap(iomem->start, resource_size(iomem));
|
||||
|
|
|
@ -488,6 +488,18 @@ struct musb {
|
|||
unsigned set_address:1;
|
||||
unsigned test_mode:1;
|
||||
unsigned softconnect:1;
|
||||
/*
|
||||
* FIXME: Remove this flag.
|
||||
*
|
||||
* This is only added to allow Blackfin to work
|
||||
* with current driver. For some unknown reason
|
||||
* Blackfin doesn't work with double buffering
|
||||
* and that's enabled by default.
|
||||
*
|
||||
* We added this flag to forcefully disable double
|
||||
* buffering until we get it working.
|
||||
*/
|
||||
unsigned double_buffer_not_ok:1 __deprecated;
|
||||
|
||||
u8 address;
|
||||
u8 test_mode_nr;
|
||||
|
|
|
@ -169,6 +169,9 @@ struct dma_controller {
|
|||
dma_addr_t dma_addr,
|
||||
u32 length);
|
||||
int (*channel_abort)(struct dma_channel *);
|
||||
int (*is_compatible)(struct dma_channel *channel,
|
||||
u16 maxpacket,
|
||||
void *buf, u32 length);
|
||||
};
|
||||
|
||||
/* called after channel_program(), may indicate a fault */
|
||||
|
|
|
@ -92,11 +92,33 @@
|
|||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
|
||||
#define is_buffer_mapped(req) (is_dma_capable() && \
|
||||
(req->map_state != UN_MAPPED))
|
||||
|
||||
/* Maps the buffer to dma */
|
||||
|
||||
static inline void map_dma_buffer(struct musb_request *request,
|
||||
struct musb *musb)
|
||||
struct musb *musb, struct musb_ep *musb_ep)
|
||||
{
|
||||
int compatible = true;
|
||||
struct dma_controller *dma = musb->dma_controller;
|
||||
|
||||
request->map_state = UN_MAPPED;
|
||||
|
||||
if (!is_dma_capable() || !musb_ep->dma)
|
||||
return;
|
||||
|
||||
/* Check if DMA engine can handle this request.
|
||||
* DMA code must reject the USB request explicitly.
|
||||
* Default behaviour is to map the request.
|
||||
*/
|
||||
if (dma->is_compatible)
|
||||
compatible = dma->is_compatible(musb_ep->dma,
|
||||
musb_ep->packet_sz, request->request.buf,
|
||||
request->request.length);
|
||||
if (!compatible)
|
||||
return;
|
||||
|
||||
if (request->request.dma == DMA_ADDR_INVALID) {
|
||||
request->request.dma = dma_map_single(
|
||||
musb->controller,
|
||||
|
@ -105,7 +127,7 @@ static inline void map_dma_buffer(struct musb_request *request,
|
|||
request->tx
|
||||
? DMA_TO_DEVICE
|
||||
: DMA_FROM_DEVICE);
|
||||
request->mapped = 1;
|
||||
request->map_state = MUSB_MAPPED;
|
||||
} else {
|
||||
dma_sync_single_for_device(musb->controller,
|
||||
request->request.dma,
|
||||
|
@ -113,7 +135,7 @@ static inline void map_dma_buffer(struct musb_request *request,
|
|||
request->tx
|
||||
? DMA_TO_DEVICE
|
||||
: DMA_FROM_DEVICE);
|
||||
request->mapped = 0;
|
||||
request->map_state = PRE_MAPPED;
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -121,11 +143,14 @@ static inline void map_dma_buffer(struct musb_request *request,
|
|||
static inline void unmap_dma_buffer(struct musb_request *request,
|
||||
struct musb *musb)
|
||||
{
|
||||
if (!is_buffer_mapped(request))
|
||||
return;
|
||||
|
||||
if (request->request.dma == DMA_ADDR_INVALID) {
|
||||
DBG(20, "not unmapping a never mapped buffer\n");
|
||||
return;
|
||||
}
|
||||
if (request->mapped) {
|
||||
if (request->map_state == MUSB_MAPPED) {
|
||||
dma_unmap_single(musb->controller,
|
||||
request->request.dma,
|
||||
request->request.length,
|
||||
|
@ -133,16 +158,15 @@ static inline void unmap_dma_buffer(struct musb_request *request,
|
|||
? DMA_TO_DEVICE
|
||||
: DMA_FROM_DEVICE);
|
||||
request->request.dma = DMA_ADDR_INVALID;
|
||||
request->mapped = 0;
|
||||
} else {
|
||||
} else { /* PRE_MAPPED */
|
||||
dma_sync_single_for_cpu(musb->controller,
|
||||
request->request.dma,
|
||||
request->request.length,
|
||||
request->tx
|
||||
? DMA_TO_DEVICE
|
||||
: DMA_FROM_DEVICE);
|
||||
|
||||
}
|
||||
request->map_state = UN_MAPPED;
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -172,7 +196,6 @@ __acquires(ep->musb->lock)
|
|||
|
||||
ep->busy = 1;
|
||||
spin_unlock(&musb->lock);
|
||||
if (is_dma_capable() && ep->dma)
|
||||
unmap_dma_buffer(req, musb);
|
||||
if (request->status == 0)
|
||||
DBG(5, "%s done request %p, %d/%d\n",
|
||||
|
@ -335,7 +358,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
|
|||
csr);
|
||||
|
||||
#ifndef CONFIG_MUSB_PIO_ONLY
|
||||
if (is_dma_capable() && musb_ep->dma) {
|
||||
if (is_buffer_mapped(req)) {
|
||||
struct dma_controller *c = musb->dma_controller;
|
||||
size_t request_size;
|
||||
|
||||
|
@ -436,7 +459,6 @@ static void txstate(struct musb *musb, struct musb_request *req)
|
|||
* Unmap the dma buffer back to cpu if dma channel
|
||||
* programming fails
|
||||
*/
|
||||
if (is_dma_capable() && musb_ep->dma)
|
||||
unmap_dma_buffer(req, musb);
|
||||
|
||||
musb_write_fifo(musb_ep->hw_ep, fifo_count,
|
||||
|
@ -627,7 +649,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
|
|||
return;
|
||||
}
|
||||
|
||||
if (is_cppi_enabled() && musb_ep->dma) {
|
||||
if (is_cppi_enabled() && is_buffer_mapped(req)) {
|
||||
struct dma_controller *c = musb->dma_controller;
|
||||
struct dma_channel *channel = musb_ep->dma;
|
||||
|
||||
|
@ -658,7 +680,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
|
|||
len = musb_readw(epio, MUSB_RXCOUNT);
|
||||
if (request->actual < request->length) {
|
||||
#ifdef CONFIG_USB_INVENTRA_DMA
|
||||
if (is_dma_capable() && musb_ep->dma) {
|
||||
if (is_buffer_mapped(req)) {
|
||||
struct dma_controller *c;
|
||||
struct dma_channel *channel;
|
||||
int use_dma = 0;
|
||||
|
@ -742,7 +764,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
|
|||
fifo_count = min_t(unsigned, len, fifo_count);
|
||||
|
||||
#ifdef CONFIG_USB_TUSB_OMAP_DMA
|
||||
if (tusb_dma_omap() && musb_ep->dma) {
|
||||
if (tusb_dma_omap() && is_buffer_mapped(req)) {
|
||||
struct dma_controller *c = musb->dma_controller;
|
||||
struct dma_channel *channel = musb_ep->dma;
|
||||
u32 dma_addr = request->dma + request->actual;
|
||||
|
@ -762,7 +784,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
|
|||
* programming fails. This buffer is mapped if the
|
||||
* channel allocation is successful
|
||||
*/
|
||||
if (is_dma_capable() && musb_ep->dma) {
|
||||
if (is_buffer_mapped(req)) {
|
||||
unmap_dma_buffer(req, musb);
|
||||
|
||||
/*
|
||||
|
@ -989,7 +1011,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
|
|||
/* Set TXMAXP with the FIFO size of the endpoint
|
||||
* to disable double buffering mode.
|
||||
*/
|
||||
musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
|
||||
if (musb->double_buffer_not_ok)
|
||||
musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
|
||||
else
|
||||
musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
|
||||
| (musb_ep->hb_mult << 11));
|
||||
|
||||
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
|
||||
if (musb_readw(regs, MUSB_TXCSR)
|
||||
|
@ -1025,7 +1051,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
|
|||
/* Set RXMAXP with the FIFO size of the endpoint
|
||||
* to disable double buffering mode.
|
||||
*/
|
||||
musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
|
||||
if (musb->double_buffer_not_ok)
|
||||
musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
|
||||
else
|
||||
musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
|
||||
| (musb_ep->hb_mult << 11));
|
||||
|
||||
/* force shared fifo to OUT-only mode */
|
||||
if (hw_ep->is_shared_fifo) {
|
||||
|
@ -1214,10 +1244,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
|
|||
request->epnum = musb_ep->current_epnum;
|
||||
request->tx = musb_ep->is_in;
|
||||
|
||||
if (is_dma_capable() && musb_ep->dma)
|
||||
map_dma_buffer(request, musb);
|
||||
else
|
||||
request->mapped = 0;
|
||||
map_dma_buffer(request, musb, musb_ep);
|
||||
|
||||
spin_lock_irqsave(&musb->lock, lockflags);
|
||||
|
||||
|
|
|
@ -35,13 +35,19 @@
|
|||
#ifndef __MUSB_GADGET_H
|
||||
#define __MUSB_GADGET_H
|
||||
|
||||
enum buffer_map_state {
|
||||
UN_MAPPED = 0,
|
||||
PRE_MAPPED,
|
||||
MUSB_MAPPED
|
||||
};
|
||||
|
||||
struct musb_request {
|
||||
struct usb_request request;
|
||||
struct musb_ep *ep;
|
||||
struct musb *musb;
|
||||
u8 tx; /* endpoint direction */
|
||||
u8 epnum;
|
||||
u8 mapped;
|
||||
enum buffer_map_state map_state;
|
||||
};
|
||||
|
||||
static inline struct musb_request *to_musb_request(struct usb_request *req)
|
||||
|
|
|
@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
|
|||
/* Set RXMAXP with the FIFO size of the endpoint
|
||||
* to disable double buffer mode.
|
||||
*/
|
||||
if (musb->hwvers < MUSB_HWVERS_2000)
|
||||
if (musb->double_buffer_not_ok)
|
||||
musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
|
||||
else
|
||||
musb_writew(ep->regs, MUSB_RXMAXP,
|
||||
|
@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
|
|||
/* protocol/endpoint/interval/NAKlimit */
|
||||
if (epnum) {
|
||||
musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
|
||||
if (can_bulk_split(musb, qh->type))
|
||||
if (musb->double_buffer_not_ok)
|
||||
musb_writew(epio, MUSB_TXMAXP,
|
||||
packet_sz
|
||||
| ((hw_ep->max_packet_sz_tx /
|
||||
packet_sz) - 1) << 11);
|
||||
hw_ep->max_packet_sz_tx);
|
||||
else
|
||||
musb_writew(epio, MUSB_TXMAXP,
|
||||
packet_sz);
|
||||
qh->maxpacket |
|
||||
((qh->hb_mult - 1) << 11));
|
||||
musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
|
||||
} else {
|
||||
musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
|
||||
|
|
|
@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
|
|||
{
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
|
||||
((u16)((u32) dma_addr & 0xFFFF)));
|
||||
dma_addr);
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
|
||||
((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
|
||||
(dma_addr >> 16));
|
||||
}
|
||||
|
||||
static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
|
||||
{
|
||||
return musb_readl(mbase,
|
||||
u32 count = musb_readw(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
|
||||
|
||||
count = count << 16;
|
||||
|
||||
count |= musb_readw(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static inline void musb_write_hsdma_count(void __iomem *mbase,
|
||||
u8 bchannel, u32 len)
|
||||
{
|
||||
musb_writel(mbase,
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
|
||||
len);
|
||||
(len >> 16));
|
||||
}
|
||||
|
||||
#endif /* CONFIG_BLACKFIN */
|
||||
|
|
|
@ -103,6 +103,8 @@ config USB_MSM_OTG_72K
|
|||
required after resetting the hardware and power management.
|
||||
This driver is required even for peripheral only or host only
|
||||
mode configurations.
|
||||
This driver is not supported on boards like trout which
|
||||
has an external PHY.
|
||||
|
||||
config AB8500_USB
|
||||
tristate "AB8500 USB Transceiver Driver"
|
||||
|
|
|
@ -100,6 +100,7 @@ struct ftdi_sio_quirk {
|
|||
static int ftdi_jtag_probe(struct usb_serial *serial);
|
||||
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
|
||||
static int ftdi_NDI_device_setup(struct usb_serial *serial);
|
||||
static int ftdi_stmclite_probe(struct usb_serial *serial);
|
||||
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
|
||||
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
|
||||
|
||||
|
@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
|
|||
.port_probe = ftdi_HE_TIRA1_setup,
|
||||
};
|
||||
|
||||
static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
|
||||
.probe = ftdi_stmclite_probe,
|
||||
};
|
||||
|
||||
/*
|
||||
* The 8U232AM has the same API as the sio except for:
|
||||
* - it can support MUCH higher baudrates; up to:
|
||||
|
@ -616,6 +621,7 @@ static struct usb_device_id id_table_combined [] = {
|
|||
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
|
||||
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
|
||||
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
|
||||
{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
|
||||
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
|
||||
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
|
||||
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
|
||||
|
@ -810,6 +816,8 @@ static struct usb_device_id id_table_combined [] = {
|
|||
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
|
||||
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
|
||||
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
||||
{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
|
||||
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
|
||||
{ }, /* Optional parameter entry */
|
||||
{ } /* Terminating entry */
|
||||
};
|
||||
|
@ -1708,6 +1716,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* First and second port on STMCLiteadaptors is reserved for JTAG interface
|
||||
* and the forth port for pio
|
||||
*/
|
||||
static int ftdi_stmclite_probe(struct usb_serial *serial)
|
||||
{
|
||||
struct usb_device *udev = serial->dev;
|
||||
struct usb_interface *interface = serial->interface;
|
||||
|
||||
dbg("%s", __func__);
|
||||
|
||||
if (interface == udev->actconfig->interface[2])
|
||||
return 0;
|
||||
|
||||
dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/*
|
||||
* The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
|
||||
* We have to correct it if we want to read from it.
|
||||
|
|
|
@ -517,6 +517,12 @@
|
|||
#define RATOC_VENDOR_ID 0x0584
|
||||
#define RATOC_PRODUCT_ID_USB60F 0xb020
|
||||
|
||||
/*
|
||||
* Acton Research Corp.
|
||||
*/
|
||||
#define ACTON_VID 0x0647 /* Vendor ID */
|
||||
#define ACTON_SPECTRAPRO_PID 0x0100
|
||||
|
||||
/*
|
||||
* Contec products (http://www.contec.com)
|
||||
* Submitted by Daniel Sangorrin
|
||||
|
@ -1033,6 +1039,12 @@
|
|||
#define STB_PID 0x0001 /* Sensor Terminal Board */
|
||||
#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
|
||||
|
||||
/*
|
||||
* STMicroelectonics
|
||||
*/
|
||||
#define ST_VID 0x0483
|
||||
#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */
|
||||
|
||||
/*
|
||||
* Papouch products (http://www.papouch.com/)
|
||||
* Submitted by Folkert van Heusden
|
||||
|
|
|
@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
|
|||
|
||||
dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
|
||||
|
||||
edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
|
||||
edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
|
||||
edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
|
||||
edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
|
||||
edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
|
||||
|
||||
for (rec = ihex_next_binrec(rec); rec;
|
||||
|
|
|
@ -369,9 +369,9 @@ failed_1port:
|
|||
|
||||
static void __exit ti_exit(void)
|
||||
{
|
||||
usb_deregister(&ti_usb_driver);
|
||||
usb_serial_deregister(&ti_1port_device);
|
||||
usb_serial_deregister(&ti_2port_device);
|
||||
usb_deregister(&ti_usb_driver);
|
||||
}
|
||||
|
||||
|
||||
|
|
|
@ -1397,6 +1397,13 @@ UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
|
|||
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
|
||||
US_FL_IGNORE_RESIDUE ),
|
||||
|
||||
/* Submitted by Nick Holloway */
|
||||
UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
|
||||
"VTech",
|
||||
"Kidizoom",
|
||||
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
|
||||
US_FL_FIX_CAPACITY ),
|
||||
|
||||
/* Reported by Michael Stattmann <michael@stattmann.com> */
|
||||
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
|
||||
"Sony Ericsson",
|
||||
|
@ -1890,6 +1897,13 @@ UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000,
|
|||
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
|
||||
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
|
||||
|
||||
/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
|
||||
UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
|
||||
"Coby Electronics",
|
||||
"MP3 Player",
|
||||
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
|
||||
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
|
||||
|
||||
UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
|
||||
"ST",
|
||||
"2A",
|
||||
|
|
|
@ -16,12 +16,8 @@
|
|||
#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
|
||||
#define __LINUX_USB_GADGET_MSM72K_UDC_H__
|
||||
|
||||
#ifdef CONFIG_ARCH_MSM7X00A
|
||||
#define USB_SBUSCFG (MSM_USB_BASE + 0x0090)
|
||||
#else
|
||||
#define USB_AHBBURST (MSM_USB_BASE + 0x0090)
|
||||
#define USB_AHBMODE (MSM_USB_BASE + 0x0098)
|
||||
#endif
|
||||
#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */
|
||||
|
||||
#define USB_USBCMD (MSM_USB_BASE + 0x0140)
|
||||
|
|
Loading…
Reference in a new issue