From 684309e5043efaaa94d9b4e65f53f7fdde1f6675 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Sat, 28 Jan 2017 17:10:39 +0200 Subject: [PATCH] pwm: lpss: Avoid potential overflow of base_unit The resolution of base_unit is derived from base_unit_bits and thus must be equal to (2^base_unit_bits - 1). Otherwise frequency and therefore base_unit might potentially overflow. Prevent the above by substracting 1 in all cases where base_unit_bits or derivative is used. Reviewed-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Thierry Reding --- drivers/pwm/pwm-lpss.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c index 72c0bce5a75c..8642feeb8abd 100644 --- a/drivers/pwm/pwm-lpss.c +++ b/drivers/pwm/pwm-lpss.c @@ -102,7 +102,7 @@ static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm, * The equation is: * base_unit = round(base_unit_range * freq / c) */ - base_unit_range = BIT(lpwm->info->base_unit_bits); + base_unit_range = BIT(lpwm->info->base_unit_bits) - 1; freq *= base_unit_range; base_unit = DIV_ROUND_CLOSEST_ULL(freq, c); @@ -117,8 +117,8 @@ static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm, ctrl = pwm_lpss_read(pwm); ctrl &= ~PWM_ON_TIME_DIV_MASK; - ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT); - base_unit &= (base_unit_range - 1); + ctrl &= ~(base_unit_range << PWM_BASE_UNIT_SHIFT); + base_unit &= base_unit_range; ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT; ctrl |= on_time_div; pwm_lpss_write(pwm, ctrl);