Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits)
  ALSA: hda - Fix ADC input-amp handling for Cx20549 codec
  ALSA: hda - Keep EAPD turned on for old Conexant chips
  ALSA: hda/realtek - Fix missing volume controls with ALC260
  ASoC: wm8940: Properly set codec->dapm.bias_level
  ALSA: hda - Fix pin-config for ASUS W90V
  ALSA: hda - Fix surround/CLFE headphone and speaker pins order
  ALSA: hda - Fix typo
  ALSA: Update the sound git tree URL
  ALSA: HDA: Add new revision for ALC662
  ASoC: max98095: Convert codec->hw_write to snd_soc_write
  ASoC: keep pointer to resource so it can be freed
  ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls
  ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2
  ASoC: da7210: Add support for line out and DAC
  ASoC: da7210: Add support for DAPM
  ALSA: hda/realtek - Fix DAC assignments of multiple speakers
  ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value
  ASoC: Set sgtl5000->ldo in ldo_regulator_register
  ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture
  ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture
  ...

Documentation/DocBook/writing-an-alsa-driver.tmpl

@@ -4288,7 +4288,7 @@ struct _snd_pcm_runtime {
 <![CDATA[
   struct snd_rawmidi *rmidi;
   snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
-                      irq, irq_flags, &rmidi);
+                      irq, &rmidi);
 ]]>
           </programlisting>
         </informalexample>
@@ -4343,6 +4343,13 @@ struct _snd_pcm_runtime {
 	by itself to start processing the output stream in the irq handler.
 	</para>
 
+	<para>
+	If the MPU-401 interface shares its interrupt with the other logical
+	devices on the card, set <constant>MPU401_INFO_IRQ_HOOK</constant>
+	(see <link linkend="midi-interface-interrupt-handler"><citetitle>
+	below</citetitle></link>).
+	</para>
+
       <para>
         Usually, the port address corresponds to the command port and
         port + 1 corresponds to the data port. If not, you may change
@@ -4375,14 +4382,12 @@ struct _snd_pcm_runtime {
       </para>
 
       <para>
-        The 6th argument specifies the irq number for UART. If the irq
-      is already allocated, pass 0 to the 7th argument
-      (<parameter>irq_flags</parameter>). Otherwise, pass the flags
-      for irq allocation 
-      (<constant>SA_XXX</constant> bits) to it, and the irq will be
-      reserved by the mpu401-uart layer. If the card doesn't generate
-      UART interrupts, pass -1 as the irq number. Then a timer
-      interrupt will be invoked for polling. 
+	The 6th argument specifies the ISA irq number that will be
+	allocated.  If no interrupt is to be allocated (because your
+	code is already allocating a shared interrupt, or because the
+	device does not use interrupts), pass -1 instead.
+	For a MPU-401 device without an interrupt, a polling timer
+	will be used instead.
       </para>
     </section>
 
@@ -4390,12 +4395,13 @@ struct _snd_pcm_runtime {
       <title>Interrupt Handler</title>
       <para>
         When the interrupt is allocated in
-      <function>snd_mpu401_uart_new()</function>, the private
-      interrupt handler is used, hence you don't have anything else to do
-      than creating the mpu401 stuff. Otherwise, you have to call
-      <function>snd_mpu401_uart_interrupt()</function> explicitly when
-      a UART interrupt is invoked and checked in your own interrupt
-      handler.  
+      <function>snd_mpu401_uart_new()</function>, an exclusive ISA
+      interrupt handler is automatically used, hence you don't have
+      anything else to do than creating the mpu401 stuff.  Otherwise, you
+      have to set <constant>MPU401_INFO_IRQ_HOOK</constant>, and call
+      <function>snd_mpu401_uart_interrupt()</function> explicitly from your
+      own interrupt handler when it has determined that a UART interrupt
+      has occurred.
       </para>
 
       <para>

Documentation/devicetree/bindings/sound/soc/codecs/fsl-sgtl5000.txt

@@ -0,0 +1,11 @@
+* Freescale SGTL5000 Stereo Codec
+
+Required properties:
+- compatible : "fsl,sgtl5000".
+
+Example:
+
+codec: sgtl5000@0a {
+	compatible = "fsl,sgtl5000";
+	reg = <0x0a>;
+};

Documentation/devicetree/bindings/sound/wm8510.txt

@@ -0,0 +1,18 @@
+WM8510 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8510"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8510@1a {
+	compatible = "wlf,wm8510";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8523.txt

@@ -0,0 +1,16 @@
+WM8523 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "wlf,wm8523"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: wm8523@1a {
+	compatible = "wlf,wm8523";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8580.txt

@@ -0,0 +1,16 @@
+WM8580 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "wlf,wm8580"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: wm8580@1a {
+	compatible = "wlf,wm8580";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8711.txt

@@ -0,0 +1,18 @@
+WM8711 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8711"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8711@1a {
+	compatible = "wlf,wm8711";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8728.txt

@@ -0,0 +1,18 @@
+WM8728 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8728"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8728@1a {
+	compatible = "wlf,wm8728";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8731.txt

@@ -0,0 +1,18 @@
+WM8731 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8731"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8731@1a {
+	compatible = "wlf,wm8731";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8737.txt

@@ -0,0 +1,18 @@
+WM8737 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8737"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8737@1a {
+	compatible = "wlf,wm8737";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8741.txt

@@ -0,0 +1,18 @@
+WM8741 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8741"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8741@1a {
+	compatible = "wlf,wm8741";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8750.txt

@@ -0,0 +1,18 @@
+WM8750 and WM8987 audio CODECs
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8750" or "wlf,wm8987"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8750@1a {
+	compatible = "wlf,wm8750";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8753.txt

@@ -0,0 +1,18 @@
+WM8753 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8753"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8737@1a {
+	compatible = "wlf,wm8753";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8770.txt

@@ -0,0 +1,16 @@
+WM8770 audio CODEC
+
+This device supports SPI.
+
+Required properties:
+
+  - compatible : "wlf,wm8770"
+
+  - reg : the chip select number.
+
+Example:
+
+codec: wm8770@1 {
+	compatible = "wlf,wm8770";
+	reg = <1>;
+};

Documentation/devicetree/bindings/sound/wm8776.txt

@@ -0,0 +1,18 @@
+WM8776 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8776"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8776@1a {
+	compatible = "wlf,wm8776";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/wm8804.txt

@@ -0,0 +1,18 @@
+WM8804 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8804"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8804@1a {
+	compatible = "wlf,wm8804";
+	reg = <0x1a>;
+};

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -886,6 +886,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 		disable)
     power_save_controller - Reset HD-audio controller in power-saving mode
 		(default = on)
+    align_buffer_size - Force rounding of buffer/period sizes to multiples
+    		      of 128 bytes. This is more efficient in terms of memory
+		      access but isn't required by the HDA spec and prevents
+		      users from specifying exact period/buffer sizes.
+		      (default = on)
+    snoop	- Enable/disable snooping (default = on)
 
     This module supports multiple cards and autoprobe.
     

Documentation/sound/alsa/HD-Audio-Controls.txt

@@ -98,3 +98,19 @@ Conexant codecs
 
 * Auto-Mute Mode
   See Reatek codecs.
+
+
+Analog codecs
+--------------
+
+* Channel Mode
+  This is an enum control to change the surround-channel setup,
+  appears only when the surround channels are available.
+  It gives the number of channels to be used, "2ch", "4ch" and "6ch".
+  According to the configuration, this also controls the
+  jack-retasking of multi-I/O jacks.
+
+* Independent HP
+  When this enum control is enabled, the headphone output is routed
+  from an individual stream (the third PCM such as hw:0,2) instead of
+  the primary stream.

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -29,9 +29,6 @@ ALC880
 
 ALC260
 ======
-  hp		HP machines
-  hp-3013	HP machines (3013-variant)
-  hp-dc7600	HP DC7600
   fujitsu	Fujitsu S7020
   acer		Acer TravelMate
   will		Will laptops (PB V7900)
@@ -46,15 +43,10 @@ ALC260
 ALC262
 ======
   fujitsu	Fujitsu Laptop
-  hp-bpc	HP xw4400/6400/8400/9400 laptops
-  hp-bpc-d7000	HP BPC D7000
-  hp-tc-t5735	HP Thin Client T5735
-  hp-rp5700	HP RP5700
   benq		Benq ED8
   benq-t31	Benq T31
   hippo		Hippo (ATI) with jack detection, Sony UX-90s
   hippo_1	Hippo (Benq) with jack detection
-  sony-assamd	Sony ASSAMD
   toshiba-s06	Toshiba S06
   toshiba-rx1	Toshiba RX1
   tyan		Tyan Thunder n6650W (S2915-E)
@@ -66,43 +58,15 @@ ALC262
 
 ALC267/268
 ==========
-  quanta-il1	Quanta IL1 mini-notebook
-  3stack	3-stack model
-  toshiba	Toshiba A205
-  acer		Acer laptops
-  acer-dmic	Acer laptops with digital-mic
-  acer-aspire	Acer Aspire One
-  dell		Dell OEM laptops (Vostro 1200)
-  zepto		Zepto laptops
-  test		for testing/debugging purpose, almost all controls can
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC269
 ======
-  basic		Basic preset
-  quanta	Quanta FL1
   laptop-amic	Laptops with analog-mic input
   laptop-dmic	Laptops with digital-mic input
-  fujitsu	FSC Amilo
-  lifebook	Fujitsu Lifebook S6420
-  auto		auto-config reading BIOS (default)
 
 ALC662/663/272
 ==============
-  3stack-dig	3-stack (2-channel) with SPDIF
-  3stack-6ch	 3-stack (6-channel)
-  3stack-6ch-dig 3-stack (6-channel) with SPDIF
-  5stack-dig	 5-stack with SPDIF
-  lenovo-101e	 Lenovo laptop
-  eeepc-p701	ASUS Eeepc P701
-  eeepc-ep20	ASUS Eeepc EP20
-  ecs		ECS/Foxconn mobo
-  m51va		ASUS M51VA
-  g71v		ASUS G71V
-  h13		ASUS H13
-  g50v		ASUS G50V
   asus-mode1	ASUS
   asus-mode2	ASUS
   asus-mode3	ASUS
@@ -111,15 +75,10 @@ ALC662/663/272
   asus-mode6	ASUS
   asus-mode7	ASUS
   asus-mode8	ASUS
-  dell		Dell with ALC272
-  dell-zm1	Dell ZM1 with ALC272
-  samsung-nc10	Samsung NC10 mini notebook
-  auto		auto-config reading BIOS (default)
 
 ALC680
 ======
-  base		Base model (ASUS NX90)
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC882/883/885/888/889
 ======================
@@ -175,28 +134,11 @@ ALC882/883/885/888/889
 
 ALC861/660
 ==========
-  3stack	3-jack
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack with SPDIF I/O
-  3stack-660	3-jack (for ALC660)
-  uniwill-m31	Uniwill M31 laptop
-  toshiba	Toshiba laptop support
-  asus		Asus laptop support
-  asus-laptop	ASUS F2/F3 laptops
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC861VD/660VD
 ==============
-  3stack	3-jack
-  3stack-dig	3-jack with SPDIF OUT
-  6stack-dig	6-jack with SPDIF OUT
-  3stack-660	3-jack (for ALC660VD)
-  3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
-  lenovo	Lenovo 3000 C200
-  dallas	Dallas laptops
-  hp		HP TX1000
-  asus-v1s	ASUS V1Sn
-  auto		auto-config reading BIOS (default)
+  N/A
 
 CMI9880
 =======
@@ -289,7 +231,6 @@ Conexant 5051
   hp-dv6736	HP dv6736
   hp-f700	HP Compaq Presario F700
   ideapad	Lenovo IdeaPad laptop
-  lenovo-x200	Lenovo X200 laptop
   toshiba	Toshiba Satellite M300
 
 Conexant 5066

Documentation/sound/alsa/HD-Audio.txt

@@ -447,7 +447,10 @@ The file needs to have a line `[codec]`.  The next line should contain
 three numbers indicating the codec vendor-id (0x12345678 in the
 example), the codec subsystem-id (0xabcd1234) and the address (2) of
 the codec.  The rest patch entries are applied to this specified codec
-until another codec entry is given.
+until another codec entry is given.  Passing 0 or a negative number to
+the first or the second value will make the check of the corresponding
+field be skipped.  It'll be useful for really broken devices that don't
+initialize SSID properly.
 
 The `[model]` line allows to change the model name of the each codec.
 In the example above, it will be changed to model=auto.
@@ -491,7 +494,7 @@ Also, the codec chip name can be rewritten via `[chip_name]` line.
 The hd-audio driver reads the file via request_firmware().  Thus,
 a patch file has to be located on the appropriate firmware path,
 typically, /lib/firmware.  For example, when you pass the option
-`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+`patch=hda-init.fw`, the file /lib/firmware/hda-init.fw must be
 present.
 
 The patch module option is specific to each card instance, and you
@@ -524,6 +527,54 @@ power-saving.  See /sys/module/snd_hda_intel/parameters/power_save to
 check the current value.  If it's non-zero, the feature is turned on.
 
 
+Tracepoints
+~~~~~~~~~~~
+The hd-audio driver gives a few basic tracepoints.
+`hda:hda_send_cmd` traces each CORB write while `hda:hda_get_response`
+traces the response from RIRB (only when read from the codec driver).
+`hda:hda_bus_reset` traces the bus-reset due to fatal error, etc,
+`hda:hda_unsol_event` traces the unsolicited events, and
+`hda:hda_power_down` and `hda:hda_power_up` trace the power down/up
+via power-saving behavior.
+
+Enabling all tracepoints can be done like
+------------------------------------------------------------------------
+  # echo 1 > /sys/kernel/debug/tracing/events/hda/enable
+------------------------------------------------------------------------
+then after some commands, you can traces from
+/sys/kernel/debug/tracing/trace file.  For example, when you want to
+trace what codec command is sent, enable the tracepoint like:
+------------------------------------------------------------------------
+  # cat /sys/kernel/debug/tracing/trace
+  # tracer: nop
+  #
+  #       TASK-PID    CPU#    TIMESTAMP  FUNCTION
+  #          | |       |          |         |
+         <...>-7807  [002] 105147.774889: hda_send_cmd: [0:0] val=e3a019
+         <...>-7807  [002] 105147.774893: hda_send_cmd: [0:0] val=e39019
+         <...>-7807  [002] 105147.999542: hda_send_cmd: [0:0] val=e3a01a
+         <...>-7807  [002] 105147.999543: hda_send_cmd: [0:0] val=e3901a
+         <...>-26764 [001] 349222.837143: hda_send_cmd: [0:0] val=e3a019
+         <...>-26764 [001] 349222.837148: hda_send_cmd: [0:0] val=e39019
+         <...>-26764 [001] 349223.058539: hda_send_cmd: [0:0] val=e3a01a
+         <...>-26764 [001] 349223.058541: hda_send_cmd: [0:0] val=e3901a
+------------------------------------------------------------------------
+Here `[0:0]` indicates the card number and the codec address, and
+`val` shows the value sent to the codec, respectively.  The value is
+a packed value, and you can decode it via hda-decode-verb program
+included in hda-emu package below.  For example, the value e3a019 is
+to set the left output-amp value to 25.
+------------------------------------------------------------------------
+  % hda-decode-verb 0xe3a019
+  raw value = 0x00e3a019
+  cid = 0, nid = 0x0e, verb = 0x3a0, parm = 0x19
+  raw value: verb = 0x3a0, parm = 0x19
+  verbname = set_amp_gain_mute
+  amp raw val = 0xa019
+  output, left, idx=0, mute=0, val=25
+------------------------------------------------------------------------
+
+
 Development Tree
 ~~~~~~~~~~~~~~~~
 The latest development codes for HD-audio are found on sound git tree:

MAINTAINERS

@@ -529,6 +529,7 @@ S:	Maintained
 F:	drivers/infiniband/hw/amso1100/
 
 ANALOG DEVICES INC ASOC CODEC DRIVERS
+M:	Lars-Peter Clausen <lars@metafoo.de>
 L:	device-drivers-devel@blackfin.uclinux.org
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://wiki.analog.com/
@@ -6038,7 +6039,7 @@ M:	Jaroslav Kysela <perex@perex.cz>
 M:	Takashi Iwai <tiwai@suse.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
 F:	Documentation/sound/
@@ -7259,6 +7260,7 @@ T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
+F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/leds/leds-wm83*.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c

arch/arm/mach-ep93xx/edb93xx.c

@@ -160,6 +160,11 @@ static void __init edb93xx_register_spi(void)
 /*************************************************************************
  * EDB93xx I2S
  *************************************************************************/
+static struct platform_device edb93xx_audio_device = {
+	.name		= "edb93xx-audio",
+	.id		= -1,
+};
+
 static int __init edb93xx_has_audio(void)
 {
 	return (machine_is_edb9301() || machine_is_edb9302() ||
@@ -171,6 +176,7 @@ static void __init edb93xx_register_i2s(void)
 {
 	if (edb93xx_has_audio()) {
 		ep93xx_register_i2s();
+		platform_device_register(&edb93xx_audio_device);
 	}
 }
 

arch/arm/mach-ep93xx/simone.c

@@ -53,6 +53,17 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = {
 	},
 };
 
+static struct platform_device simone_audio_device = {
+	.name		= "simone-audio",
+	.id		= -1,
+};
+
+static void __init simone_register_audio(void)
+{
+	ep93xx_register_ac97();
+	platform_device_register(&simone_audio_device);
+}
+
 static void __init simone_init_machine(void)
 {
 	ep93xx_init_devices();
@@ -61,7 +72,7 @@ static void __init simone_init_machine(void)
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
 			    ARRAY_SIZE(simone_i2c_board_info));
-	ep93xx_register_ac97();
+	simone_register_audio();
 }
 
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")

arch/arm/mach-ep93xx/snappercl15.c

@@ -150,6 +150,17 @@ static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
 	.bpp			= 16,
 };
 
+static struct platform_device snappercl15_audio_device = {
+	.name		= "snappercl15-audio",
+	.id		= -1,
+};
+
+static void __init snappercl15_register_audio(void)
+{
+	ep93xx_register_i2s();
+	platform_device_register(&snappercl15_audio_device);
+}
+
 static void __init snappercl15_init_machine(void)
 {
 	ep93xx_init_devices();
@@ -157,7 +168,7 @@ static void __init snappercl15_init_machine(void)
 	ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
 			    ARRAY_SIZE(snappercl15_i2c_data));
 	ep93xx_register_fb(&snappercl15_fb_info);
-	ep93xx_register_i2s();
+	snappercl15_register_audio();
 	platform_device_register(&snappercl15_nand_device);
 }
 

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -900,7 +900,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 };
 
 static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
-	.id			= TPA6130A2,
 	.power_gpio		= 98,
 };
 

arch/arm/mach-omap2/devices.c

@@ -329,6 +329,38 @@ static void omap_init_audio(void)
 static inline void omap_init_audio(void) {}
 #endif
 
+#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
+		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
+
+static struct omap_device_pm_latency omap_mcpdm_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static void omap_init_mcpdm(void)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+
+	oh = omap_hwmod_lookup("mcpdm");
+	if (!oh) {
+		printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+		return;
+	}
+
+	od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0,
+				omap_mcpdm_latency,
+				ARRAY_SIZE(omap_mcpdm_latency), 0);
+	if (IS_ERR(od))
+		printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n");
+}
+#else
+static inline void omap_init_mcpdm(void) {}
+#endif
+
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <plat/mcspi.h>
@@ -682,6 +714,7 @@ static int __init omap2_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_audio();
+	omap_init_mcpdm();
 	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -5430,7 +5430,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	&omap44xx_mcbsp4_hwmod,
 
 	/* mcpdm class */
-/*	&omap44xx_mcpdm_hwmod, */
+	&omap44xx_mcpdm_hwmod,
 
 	/* mcspi class */
 	&omap44xx_mcspi1_hwmod,

arch/arm/plat-omap/devices.c

@@ -73,41 +73,6 @@ void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
-		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static struct resource mcpdm_resources[] = {
-	{
-		.name		= "mcpdm_mem",
-		.start		= OMAP44XX_MCPDM_BASE,
-		.end		= OMAP44XX_MCPDM_BASE + SZ_4K,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.name		= "mcpdm_irq",
-		.start		= OMAP44XX_IRQ_MCPDM,
-		.end		= OMAP44XX_IRQ_MCPDM,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_mcpdm_device = {
-	.name		= "omap-mcpdm",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mcpdm_resources),
-	.resource	= mcpdm_resources,
-};
-
-static void omap_init_mcpdm(void)
-{
-	(void) platform_device_register(&omap_mcpdm_device);
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
@@ -290,7 +255,6 @@ static int __init omap_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_rng();
-	omap_init_mcpdm();
 	omap_init_uwire();
 	return 0;
 }

arch/mips/alchemy/devboards/db1200/platform.c

@@ -422,6 +422,7 @@ static struct resource au1200_psc1_res[] = {
 	},
 };
 
+/* AC97 or I2S device */
 static struct platform_device db1200_audio_dev = {
 	/* name assigned later based on switch setting */
 	.id		= 1,	/* PSC ID */
@@ -429,19 +430,32 @@ static struct platform_device db1200_audio_dev = {
 	.resource	= au1200_psc1_res,
 };
 
+/* DB1200 ASoC card device */
+static struct platform_device db1200_sound_dev = {
+	/* name assigned later based on switch setting */
+	.id		= 1,	/* PSC ID */
+};
+
 static struct platform_device db1200_stac_dev = {
 	.name		= "ac97-codec",
 	.id		= 1,	/* on PSC1 */
 };
 
+static struct platform_device db1200_audiodma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 1,	/* PSC ID */
+};
+
 static struct platform_device *db1200_devs[] __initdata = {
 	NULL,		/* PSC0, selected by S6.8 */
 	&db1200_ide_dev,
 	&db1200_eth_dev,
 	&db1200_rtc_dev,
 	&db1200_nand_dev,
+	&db1200_audiodma_dev,
 	&db1200_audio_dev,
 	&db1200_stac_dev,
+	&db1200_sound_dev,
 };
 
 static int __init db1200_dev_init(void)
@@ -501,10 +515,12 @@ static int __init db1200_dev_init(void)
 	if (sw == BCSR_SWITCHES_DIP_8) {
 		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
 		db1200_audio_dev.name = "au1xpsc_i2s";
+		db1200_sound_dev.name = "db1200-i2s";
 		printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
 	} else {
 		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
 		db1200_audio_dev.name = "au1xpsc_ac97";
+		db1200_sound_dev.name = "db1200-ac97";
 		printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
 	}
 

arch/mips/alchemy/devboards/db1x00/platform.c

@@ -19,8 +19,11 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include "../platform.h"
@@ -85,6 +88,45 @@
 #endif
 #endif
 
+static struct resource alchemy_ac97c_res[] = {
+	[0] = {
+		.start	= AU1000_AC97_PHYS_ADDR,
+		.end	= AU1000_AC97_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMA_ID_AC97C_TX,
+		.end	= DMA_ID_AC97C_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMA_ID_AC97C_RX,
+		.end	= DMA_ID_AC97C_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device alchemy_ac97c_dev = {
+	.name		= "alchemy-ac97c",
+	.id		= -1,
+	.resource	= alchemy_ac97c_res,
+	.num_resources	= ARRAY_SIZE(alchemy_ac97c_res),
+};
+
+static struct platform_device alchemy_ac97c_dma_dev = {
+	.name		= "alchemy-pcm-dma",
+	.id		= 0,
+};
+
+static struct platform_device db1x00_codec_dev = {
+	.name		= "ac97-codec",
+	.id		= -1,
+};
+
+static struct platform_device db1x00_audio_dev = {
+	.name		= "db1000-audio",
+};
+
 static int __init db1xxx_dev_init(void)
 {
 #ifdef DB1XXX_HAS_PCMCIA
@@ -113,6 +155,12 @@ static int __init db1xxx_dev_init(void)
 				    1);
 #endif
 	db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
+
+	platform_device_register(&db1x00_codec_dev);
+	platform_device_register(&alchemy_ac97c_dma_dev);
+	platform_device_register(&alchemy_ac97c_dev);
+	platform_device_register(&db1x00_audio_dev);
+
 	return 0;
 }
 device_initcall(db1xxx_dev_init);

drivers/input/misc/twl6040-vibra.c

@@ -74,12 +74,12 @@ static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
 	if (status & TWL6040_VIBLOCDET) {
 		dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
-				   TWL6040_VIBENAL);
+				   TWL6040_VIBENA);
 	}
 	if (status & TWL6040_VIBROCDET) {
 		dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
-				   TWL6040_VIBENAR);
+				   TWL6040_VIBENA);
 	}
 
 	return IRQ_HANDLED;
@@ -97,23 +97,23 @@ static void twl6040_vibra_enable(struct vibra_info *info)
 	}
 
 	twl6040_power(info->twl6040, 1);
-	if (twl6040->rev <= TWL6040_REV_ES1_1) {
+	if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
 		/*
 		 * ERRATA: Disable overcurrent protection for at least
 		 * 3ms when enabling vibrator drivers to avoid false
 		 * overcurrent detection
 		 */
 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
-				  TWL6040_VIBENAL | TWL6040_VIBCTRLL);
+				  TWL6040_VIBENA | TWL6040_VIBCTRL);
 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
-				  TWL6040_VIBENAR | TWL6040_VIBCTRLR);
+				  TWL6040_VIBENA | TWL6040_VIBCTRL);
 		usleep_range(3000, 3500);
 	}
 
 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
-			  TWL6040_VIBENAL);
+			  TWL6040_VIBENA);
 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
-			  TWL6040_VIBENAR);
+			  TWL6040_VIBENA);
 
 	info->enabled = true;
 }
@@ -201,6 +201,13 @@ static int vibra_play(struct input_dev *input, void *data,
 	struct vibra_info *info = input_get_drvdata(input);
 	int ret;
 
+	/* Do not allow effect, while the routing is set to use audio */
+	ret = twl6040_get_vibralr_status(info->twl6040);
+	if (ret & TWL6040_VIBSEL) {
+		dev_info(&input->dev, "Vibra is configured for audio\n");
+		return -EBUSY;
+	}
+
 	info->weak_speed = effect->u.rumble.weak_magnitude;
 	info->strong_speed = effect->u.rumble.strong_magnitude;
 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;

drivers/mfd/twl6040-core.c

@@ -34,7 +34,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/twl6040.h>
 
-static struct platform_device *twl6040_dev;
+#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
 
 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 {
@@ -42,10 +42,16 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 	u8 val = 0;
 
 	mutex_lock(&twl6040->io_mutex);
-	ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
-	if (ret < 0) {
-		mutex_unlock(&twl6040->io_mutex);
-		return ret;
+	/* Vibra control registers from cache */
+	if (unlikely(reg == TWL6040_REG_VIBCTLL ||
+		     reg == TWL6040_REG_VIBCTLR)) {
+		val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
+	} else {
+		ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
+		if (ret < 0) {
+			mutex_unlock(&twl6040->io_mutex);
+			return ret;
+		}
 	}
 	mutex_unlock(&twl6040->io_mutex);
 
@@ -59,6 +65,9 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
 
 	mutex_lock(&twl6040->io_mutex);
 	ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
+	/* Cache the vibra control registers */
+	if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
+		twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
 	mutex_unlock(&twl6040->io_mutex);
 
 	return ret;
@@ -203,11 +212,11 @@ static irqreturn_t twl6040_naudint_handler(int irq, void *data)
 	if (intid & TWL6040_THINT) {
 		status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
 		if (status & TWL6040_TSHUTDET) {
-			dev_warn(&twl6040_dev->dev,
+			dev_warn(twl6040->dev,
 				 "Thermal shutdown, powering-off");
 			twl6040_power(twl6040, 0);
 		} else {
-			dev_warn(&twl6040_dev->dev,
+			dev_warn(twl6040->dev,
 				 "Leaving thermal shutdown, powering-on");
 			twl6040_power(twl6040, 1);
 		}
@@ -227,7 +236,7 @@ static int twl6040_power_up_completion(struct twl6040 *twl6040,
 	if (!time_left) {
 		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 		if (!(intid & TWL6040_READYINT)) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"timeout waiting for READYINT\n");
 			return -ETIMEDOUT;
 		}
@@ -255,7 +264,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			/* wait for power-up completion */
 			ret = twl6040_power_up_completion(twl6040, naudint);
 			if (ret) {
-				dev_err(&twl6040_dev->dev,
+				dev_err(twl6040->dev,
 					"automatic power-down failed\n");
 				twl6040->power_count = 0;
 				goto out;
@@ -264,7 +273,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			/* use manual power-up sequence */
 			ret = twl6040_power_up(twl6040);
 			if (ret) {
-				dev_err(&twl6040_dev->dev,
+				dev_err(twl6040->dev,
 					"manual power-up failed\n");
 				twl6040->power_count = 0;
 				goto out;
@@ -276,7 +285,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 	} else {
 		/* already powered-down */
 		if (!twl6040->power_count) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"device is already powered-off\n");
 			ret = -EPERM;
 			goto out;
@@ -326,7 +335,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 			lppllctl &= ~TWL6040_LPLLFIN;
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_out %d not supported\n", freq_out);
 			ret = -EINVAL;
 			goto pll_out;
@@ -347,7 +356,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 					  hppllctl);
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_in %d not supported\n", freq_in);
 			ret = -EINVAL;
 			goto pll_out;
@@ -356,7 +365,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 	case TWL6040_SYSCLK_SEL_HPPLL:
 		/* high-performance PLL can provide only 19.2 MHz */
 		if (freq_out != 19200000) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_out %d not supported\n", freq_out);
 			ret = -EINVAL;
 			goto pll_out;
@@ -389,7 +398,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 				    TWL6040_HPLLENA;
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_in %d not supported\n", freq_in);
 			ret = -EINVAL;
 			goto pll_out;
@@ -406,7 +415,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 		twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 		break;
 	default:
-		dev_err(&twl6040_dev->dev, "unknown pll id %d\n", pll_id);
+		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
 		ret = -EINVAL;
 		goto pll_out;
 	}
@@ -435,6 +444,18 @@ unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 }
 EXPORT_SYMBOL(twl6040_get_sysclk);
 
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040)
+{
+	u8 status;
+
+	status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
+	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
+
+	return status;
+}
+EXPORT_SYMBOL(twl6040_get_vibralr_status);
+
 static struct resource twl6040_vibra_rsrc[] = {
 	{
 		.flags = IORESOURCE_IRQ,
@@ -471,9 +492,7 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, twl6040);
 
-	twl6040_dev = pdev;
 	twl6040->dev = &pdev->dev;
-	twl6040->audpwron = pdata->audpwron_gpio;
 	twl6040->irq = pdata->naudint_irq;
 	twl6040->irq_base = pdata->irq_base;
 
@@ -483,6 +502,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 
 	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
 
+	/* ERRATA: Automatic power-up is not possible in ES1.0 */
+	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
+		twl6040->audpwron = pdata->audpwron_gpio;
+	else
+		twl6040->audpwron = -EINVAL;
+
 	if (gpio_is_valid(twl6040->audpwron)) {
 		ret = gpio_request(twl6040->audpwron, "audpwron");
 		if (ret)
@@ -493,10 +518,6 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
 			goto gpio2_err;
 	}
 
-	/* ERRATA: Automatic power-up is not possible in ES1.0 */
-	if (twl6040->rev == TWL6040_REV_ES1_0)
-		twl6040->audpwron = -EINVAL;
-
 	/* codec interrupt */
 	ret = twl6040_irq_init(twl6040);
 	if (ret)
@@ -566,7 +587,6 @@ gpio2_err:
 gpio1_err:
 	platform_set_drvdata(pdev, NULL);
 	kfree(twl6040);
-	twl6040_dev = NULL;
 	return ret;
 }
 
@@ -586,7 +606,6 @@ static int __devexit twl6040_remove(struct platform_device *pdev)
 	mfd_remove_devices(&pdev->dev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(twl6040);
-	twl6040_dev = NULL;
 
 	return 0;
 }

drivers/mfd/wm8994-core.c

@@ -167,6 +167,18 @@ static struct mfd_cell wm8994_devs[] = {
  * and should be handled via the standard regulator API supply
  * management.
  */
+static const char *wm1811_main_supplies[] = {
+	"DBVDD1",
+	"DBVDD2",
+	"DBVDD3",
+	"DCVDD",
+	"AVDD1",
+	"AVDD2",
+	"CPVDD",
+	"SPKVDD1",
+	"SPKVDD2",
+};
+
 static const char *wm8994_main_supplies[] = {
 	"DBVDD",
 	"DCVDD",
@@ -329,6 +341,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	switch (wm8994->type) {
+	case WM1811:
+		wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
+		break;
 	case WM8994:
 		wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
 		break;
@@ -349,6 +364,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	switch (wm8994->type) {
+	case WM1811:
+		for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
+			wm8994->supplies[i].supply = wm1811_main_supplies[i];
+		break;
 	case WM8994:
 		for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
 			wm8994->supplies[i].supply = wm8994_main_supplies[i];
@@ -382,6 +401,13 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		goto err_enable;
 	}
 	switch (ret) {
+	case 0x1811:
+		devname = "WM1811";
+		if (wm8994->type != WM1811)
+			dev_warn(wm8994->dev, "Device registered as type %d\n",
+				 wm8994->type);
+		wm8994->type = WM1811;
+		break;
 	case 0x8994:
 		devname = "WM8994";
 		if (wm8994->type != WM8994)
@@ -539,6 +565,7 @@ static int wm8994_i2c_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id wm8994_i2c_id[] = {
+	{ "wm1811", WM1811 },
 	{ "wm8994", WM8994 },
 	{ "wm8958", WM8958 },
 	{ }

drivers/regulator/core.c

@@ -1552,6 +1552,68 @@ int regulator_force_disable(struct regulator *regulator)
 }
 EXPORT_SYMBOL_GPL(regulator_force_disable);
 
+static void regulator_disable_work(struct work_struct *work)
+{
+	struct regulator_dev *rdev = container_of(work, struct regulator_dev,
+						  disable_work.work);
+	int count, i, ret;
+
+	mutex_lock(&rdev->mutex);
+
+	BUG_ON(!rdev->deferred_disables);
+
+	count = rdev->deferred_disables;
+	rdev->deferred_disables = 0;
+
+	for (i = 0; i < count; i++) {
+		ret = _regulator_disable(rdev);
+		if (ret != 0)
+			rdev_err(rdev, "Deferred disable failed: %d\n", ret);
+	}
+
+	mutex_unlock(&rdev->mutex);
+
+	if (rdev->supply) {
+		for (i = 0; i < count; i++) {
+			ret = regulator_disable(rdev->supply);
+			if (ret != 0) {
+				rdev_err(rdev,
+					 "Supply disable failed: %d\n", ret);
+			}
+		}
+	}
+}
+
+/**
+ * regulator_disable_deferred - disable regulator output with delay
+ * @regulator: regulator source
+ * @ms: miliseconds until the regulator is disabled
+ *
+ * Execute regulator_disable() on the regulator after a delay.  This
+ * is intended for use with devices that require some time to quiesce.
+ *
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled, the regulator device supports disabling and
+ * machine constraints permit this operation.
+ */
+int regulator_disable_deferred(struct regulator *regulator, int ms)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+	rdev->deferred_disables++;
+	mutex_unlock(&rdev->mutex);
+
+	ret = schedule_delayed_work(&rdev->disable_work,
+				    msecs_to_jiffies(ms));
+	if (ret < 0)
+		return ret;
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_disable_deferred);
+
 static int _regulator_is_enabled(struct regulator_dev *rdev)
 {
 	/* If we don't know then assume that the regulator is always on */
@@ -2622,6 +2684,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	INIT_LIST_HEAD(&rdev->consumer_list);
 	INIT_LIST_HEAD(&rdev->list);
 	BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+	INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);
 
 	/* preform any regulator specific init */
 	if (init_data->regulator_init) {
@@ -2729,6 +2792,7 @@ void regulator_unregister(struct regulator_dev *rdev)
 #ifdef CONFIG_DEBUG_FS
 	debugfs_remove_recursive(rdev->debugfs);
 #endif
+	flush_work_sync(&rdev->disable_work.work);
 	WARN_ON(rdev->open_count);
 	unset_regulator_supplies(rdev);
 	list_del(&rdev->list);

drivers/regulator/wm8994-regulator.c

@@ -140,6 +140,14 @@ static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
 		return (selector * 100000) + 900000;
 	case WM8958:
 		return (selector * 100000) + 1000000;
+	case WM1811:
+		switch (selector) {
+		case 0:
+			return -EINVAL;
+		default:
+			return (selector * 100000) + 950000;
+		}
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -170,6 +178,11 @@ static int wm8994_ldo2_set_voltage(struct regulator_dev *rdev,
 	case WM8958:
 		selector = (min_uV - 1000000) / 100000;
 		break;
+	case WM1811:
+		selector = (min_uV - 950000) / 100000;
+		if (selector == 0)
+			selector = 1;
+		break;
 	default:
 		return -EINVAL;
 	}

include/linux/input.h

@@ -815,6 +815,7 @@ struct input_keymap_entry {
 #define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
 #define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
 #define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)
 

include/linux/mfd/twl6040.h

@@ -68,11 +68,6 @@
 #define TWL6040_REG_ACCCTL		0x2D
 #define TWL6040_REG_STATUS		0x2E
 
-#define TWL6040_CACHEREGNUM		(TWL6040_REG_STATUS + 1)
-
-#define TWL6040_VIOREGNUM		18
-#define TWL6040_VDDREGNUM		21
-
 /* INTID (0x03) fields */
 
 #define TWL6040_THINT			0x01
@@ -125,34 +120,24 @@
 #define TWL6040_LPLLFIN			0x08
 #define TWL6040_HPLLSEL			0x10
 
-/* HSLCTL (0x10) fields */
+/* HSLCTL/R (0x10/0x11) fields */
 
-#define TWL6040_HSDACMODEL		0x02
-#define TWL6040_HSDRVMODEL		0x08
+#define TWL6040_HSDACENA		(1 << 0)
+#define TWL6040_HSDACMODE		(1 << 1)
+#define TWL6040_HSDRVMODE		(1 << 3)
 
-/* HSRCTL (0x11) fields */
+/* VIBCTLL/R (0x18/0x1A) fields */
 
-#define TWL6040_HSDACMODER		0x02
-#define TWL6040_HSDRVMODER		0x08
+#define TWL6040_VIBENA			(1 << 0)
+#define TWL6040_VIBSEL			(1 << 1)
+#define TWL6040_VIBCTRL			(1 << 2)
+#define TWL6040_VIBCTRL_P		(1 << 3)
+#define TWL6040_VIBCTRL_N		(1 << 4)
 
-/* VIBCTLL (0x18) fields */
-
-#define TWL6040_VIBENAL			0x01
-#define TWL6040_VIBCTRLL		0x04
-#define TWL6040_VIBCTRLLP		0x08
-#define TWL6040_VIBCTRLLN		0x10
-
-/* VIBDATL (0x19) fields */
+/* VIBDATL/R (0x19/0x1B) fields */
 
 #define TWL6040_VIBDAT_MAX		0x64
 
-/* VIBCTLR (0x1A) fields */
-
-#define TWL6040_VIBENAR			0x01
-#define TWL6040_VIBCTRLR		0x04
-#define TWL6040_VIBCTRLRP		0x08
-#define TWL6040_VIBCTRLRN		0x10
-
 /* GPOCTL (0x1E) fields */
 
 #define TWL6040_GPO1			0x01
@@ -200,6 +185,7 @@ struct twl6040 {
 	int audpwron;
 	int power_count;
 	int rev;
+	u8 vibra_ctrl_cache[2];
 
 	int pll;
 	unsigned int sysclk;
@@ -224,5 +210,13 @@ int twl6040_get_pll(struct twl6040 *twl6040);
 unsigned int twl6040_get_sysclk(struct twl6040 *twl6040);
 int twl6040_irq_init(struct twl6040 *twl6040);
 void twl6040_irq_exit(struct twl6040 *twl6040);
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040);
+
+static inline int twl6040_get_revid(struct twl6040 *twl6040)
+{
+	return twl6040->rev;
+}
+
 
 #endif  /* End of __TWL6040_CODEC_H__ */

include/linux/mfd/wm8994/core.h

@@ -20,6 +20,7 @@
 enum wm8994_type {
 	WM8994 = 0,
 	WM8958 = 1,
+	WM1811 = 2,
 };
 
 struct regulator_dev;

include/linux/mfd/wm8994/registers.h

@@ -72,6 +72,7 @@
 #define WM8994_DC_SERVO_2                       0x55
 #define WM8994_DC_SERVO_4                       0x57
 #define WM8994_DC_SERVO_READBACK                0x58
+#define WM8994_DC_SERVO_4E			0x59
 #define WM8994_ANALOGUE_HP_1                    0x60
 #define WM8958_MIC_DETECT_1                     0xD0
 #define WM8958_MIC_DETECT_2                     0xD1
@@ -133,6 +134,8 @@
 #define WM8994_AIF1_DAC1_FILTERS_2              0x421
 #define WM8994_AIF1_DAC2_FILTERS_1              0x422
 #define WM8994_AIF1_DAC2_FILTERS_2              0x423
+#define WM8958_AIF1_DAC1_NOISE_GATE             0x430
+#define WM8958_AIF1_DAC2_NOISE_GATE             0x431
 #define WM8994_AIF1_DRC1_1                      0x440
 #define WM8994_AIF1_DRC1_2                      0x441
 #define WM8994_AIF1_DRC1_3                      0x442
@@ -190,6 +193,7 @@
 #define WM8994_AIF2_ADC_FILTERS                 0x510
 #define WM8994_AIF2_DAC_FILTERS_1               0x520
 #define WM8994_AIF2_DAC_FILTERS_2               0x521
+#define WM8958_AIF2_DAC_NOISE_GATE              0x530
 #define WM8994_AIF2_DRC_1                       0x540
 #define WM8994_AIF2_DRC_2                       0x541
 #define WM8994_AIF2_DRC_3                       0x542
@@ -1920,6 +1924,44 @@
 #define WM8994_LDO2_DISCH_SHIFT                      0  /* LDO2_DISCH */
 #define WM8994_LDO2_DISCH_WIDTH                      1  /* LDO2_DISCH */
 
+/*
+ * R61 (0x3D) - MICBIAS1
+ */
+#define WM8958_MICB1_RATE                       0x0020  /* MICB1_RATE */
+#define WM8958_MICB1_RATE_MASK                  0x0020  /* MICB1_RATE */
+#define WM8958_MICB1_RATE_SHIFT                      5  /* MICB1_RATE */
+#define WM8958_MICB1_RATE_WIDTH                      1  /* MICB1_RATE */
+#define WM8958_MICB1_MODE                       0x0010  /* MICB1_MODE */
+#define WM8958_MICB1_MODE_MASK                  0x0010  /* MICB1_MODE */
+#define WM8958_MICB1_MODE_SHIFT                      4  /* MICB1_MODE */
+#define WM8958_MICB1_MODE_WIDTH                      1  /* MICB1_MODE */
+#define WM8958_MICB1_LVL_MASK                   0x000E  /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_LVL_SHIFT                       1  /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_LVL_WIDTH                       3  /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_DISCH                      0x0001  /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_MASK                 0x0001  /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_SHIFT                     0  /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_WIDTH                     1  /* MICB1_DISCH */
+
+/*
+ * R62 (0x3E) - MICBIAS2
+ */
+#define WM8958_MICB2_RATE                       0x0020  /* MICB2_RATE */
+#define WM8958_MICB2_RATE_MASK                  0x0020  /* MICB2_RATE */
+#define WM8958_MICB2_RATE_SHIFT                      5  /* MICB2_RATE */
+#define WM8958_MICB2_RATE_WIDTH                      1  /* MICB2_RATE */
+#define WM8958_MICB2_MODE                       0x0010  /* MICB2_MODE */
+#define WM8958_MICB2_MODE_MASK                  0x0010  /* MICB2_MODE */
+#define WM8958_MICB2_MODE_SHIFT                      4  /* MICB2_MODE */
+#define WM8958_MICB2_MODE_WIDTH                      1  /* MICB2_MODE */
+#define WM8958_MICB2_LVL_MASK                   0x000E  /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_LVL_SHIFT                       1  /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_LVL_WIDTH                       3  /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_DISCH                      0x0001  /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_MASK                 0x0001  /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_SHIFT                     0  /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
+
 /*
  * R76 (0x4C) - Charge Pump (1)
  */
@@ -2027,6 +2069,10 @@
 /*
  * R96 (0x60) - Analogue HP (1)
  */
+#define WM1811_HPOUT1_ATTN                      0x0100  /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_MASK                 0x0100  /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_SHIFT                     8  /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_WIDTH                     1  /* HPOUT1_ATTN */
 #define WM8994_HPOUT1L_RMV_SHORT                0x0080  /* HPOUT1L_RMV_SHORT */
 #define WM8994_HPOUT1L_RMV_SHORT_MASK           0x0080  /* HPOUT1L_RMV_SHORT */
 #define WM8994_HPOUT1L_RMV_SHORT_SHIFT               7  /* HPOUT1L_RMV_SHORT */
@@ -2948,6 +2994,34 @@
 #define WM8994_AIF1DAC2_3D_ENA_SHIFT                 8  /* AIF1DAC2_3D_ENA */
 #define WM8994_AIF1DAC2_3D_ENA_WIDTH                 1  /* AIF1DAC2_3D_ENA */
 
+/*
+ * R1072 (0x430) - AIF1 DAC1 Noise Gate
+ */
+#define WM8958_AIF1DAC1_NG_HLD_MASK             0x0060  /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_HLD_SHIFT                 5  /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_HLD_WIDTH                 2  /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_THR_MASK             0x000E  /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_THR_SHIFT                 1  /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_THR_WIDTH                 3  /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_ENA                  0x0001  /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_MASK             0x0001  /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_SHIFT                 0  /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_WIDTH                 1  /* AIF1DAC1_NG_ENA */
+
+/*
+ * R1073 (0x431) - AIF1 DAC2 Noise Gate
+ */
+#define WM8958_AIF1DAC2_NG_HLD_MASK             0x0060  /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_HLD_SHIFT                 5  /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_HLD_WIDTH                 2  /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_THR_MASK             0x000E  /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_THR_SHIFT                 1  /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_THR_WIDTH                 3  /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_ENA                  0x0001  /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_MASK             0x0001  /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_SHIFT                 0  /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_WIDTH                 1  /* AIF1DAC2_NG_ENA */
+
 /*
  * R1088 (0x440) - AIF1 DRC1 (1)
  */
@@ -3559,6 +3633,20 @@
 #define WM8994_AIF2DAC_3D_ENA_SHIFT                  8  /* AIF2DAC_3D_ENA */
 #define WM8994_AIF2DAC_3D_ENA_WIDTH                  1  /* AIF2DAC_3D_ENA */
 
+/*
+ * R1328 (0x530) - AIF2 DAC Noise Gate
+ */
+#define WM8958_AIF2DAC_NG_HLD_MASK              0x0060  /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_HLD_SHIFT                  5  /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_HLD_WIDTH                  2  /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_THR_MASK              0x000E  /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_THR_SHIFT                  1  /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_THR_WIDTH                  3  /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_ENA                   0x0001  /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_MASK              0x0001  /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_SHIFT                  0  /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_WIDTH                  1  /* AIF2DAC_NG_ENA */
+
 /*
  * R1344 (0x540) - AIF2 DRC (1)
  */

include/linux/regulator/consumer.h

@@ -141,6 +141,7 @@ int regulator_enable(struct regulator *regulator);
 int regulator_disable(struct regulator *regulator);
 int regulator_force_disable(struct regulator *regulator);
 int regulator_is_enabled(struct regulator *regulator);
+int regulator_disable_deferred(struct regulator *regulator, int ms);
 
 int regulator_bulk_get(struct device *dev, int num_consumers,
 		       struct regulator_bulk_data *consumers);
@@ -211,6 +212,12 @@ static inline int regulator_disable(struct regulator *regulator)
 	return 0;
 }
 
+static inline int regulator_disable_deferred(struct regulator *regulator,
+					     int ms)
+{
+	return 0;
+}
+
 static inline int regulator_is_enabled(struct regulator *regulator)
 {
 	return 1;

include/linux/regulator/driver.h

@@ -199,6 +199,9 @@ struct regulator_dev {
 	struct regulation_constraints *constraints;
 	struct regulator *supply;	/* for tree */
 
+	struct delayed_work disable_work;
+	int deferred_disables;
+
 	void *reg_data;		/* regulator_dev data */
 
 #ifdef CONFIG_DEBUG_FS

include/linux/usb/ch9.h

@@ -383,12 +383,6 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
 #define USB_ENDPOINT_DIR_MASK		0x80
 
-#define USB_ENDPOINT_SYNCTYPE		0x0c
-#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
-
 #define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
 #define USB_ENDPOINT_XFER_CONTROL	0
 #define USB_ENDPOINT_XFER_ISOC		1
@@ -396,6 +390,17 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_XFER_INT		3
 #define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
 
+#define USB_ENDPOINT_SYNCTYPE		0x0c
+#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK		0x30
+#define USB_ENDPOINT_USAGE_DATA		0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
+
 /*-------------------------------------------------------------------------*/
 
 /**

include/sound/adau1373.h

@@ -0,0 +1,34 @@
+/*
+ * Analog Devices ADAU1373 Audio Codec drive
+ *
+ * Copyright 2011 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __SOUND_ADAU1373_H__
+#define __SOUND_ADAU1373_H__
+
+enum adau1373_micbias_voltage {
+	ADAU1373_MICBIAS_2_9V = 0,
+	ADAU1373_MICBIAS_2_2V = 1,
+	ADAU1373_MICBIAS_2_6V = 2,
+	ADAU1373_MICBIAS_1_8V = 3,
+};
+
+#define ADAU1373_DRC_SIZE 13
+
+struct adau1373_platform_data {
+	bool input_differential[4];
+	bool lineout_differential;
+	bool lineout_ground_sense;
+
+	unsigned int num_drc;
+	uint8_t drc_setting[3][ADAU1373_DRC_SIZE];
+
+	enum adau1373_micbias_voltage micbias1;
+	enum adau1373_micbias_voltage micbias2;
+};
+
+#endif

include/sound/asound.h

@@ -706,7 +706,7 @@ struct snd_timer_tread {
  *                                                                          *
  ****************************************************************************/
 
-#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 6)
+#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 7)
 
 struct snd_ctl_card_info {
 	int card;			/* card number */
@@ -803,6 +803,8 @@ struct snd_ctl_elem_info {
 			unsigned int items;	/* R: number of items */
 			unsigned int item;	/* W: item number */
 			char name[64];		/* R: value name */
+			__u64 names_ptr;	/* W: names list (ELEM_ADD only) */
+			unsigned int names_length;
 		} enumerated;
 		unsigned char reserved[128];
 	} value;

include/sound/initval.h

@@ -62,7 +62,7 @@ static int snd_legacy_find_free_irq(int *irq_table)
 {
 	while (*irq_table != -1) {
 		if (!request_irq(*irq_table, snd_legacy_empty_irq_handler,
-				 IRQF_DISABLED | IRQF_PROBE_SHARED, "ALSA Test IRQ",
+				 IRQF_PROBE_SHARED, "ALSA Test IRQ",
 				 (void *) irq_table)) {
 			free_irq(*irq_table, (void *) irq_table);
 			return *irq_table;

include/sound/jack.h

@@ -42,6 +42,7 @@ enum snd_jack_types {
 	SND_JACK_MECHANICAL	= 0x0008, /* If detected separately */
 	SND_JACK_VIDEOOUT	= 0x0010,
 	SND_JACK_AVOUT		= SND_JACK_LINEOUT | SND_JACK_VIDEOOUT,
+	SND_JACK_LINEIN		= 0x0020,
 
 	/* Kept separate from switches to facilitate implementation */
 	SND_JACK_BTN_0		= 0x4000,

include/sound/mpu401.h

@@ -50,7 +50,10 @@
 #define MPU401_INFO_INTEGRATED	(1 << 2)	/* integrated h/w port */
 #define MPU401_INFO_MMIO	(1 << 3)	/* MMIO access */
 #define MPU401_INFO_TX_IRQ	(1 << 4)	/* independent TX irq */
+#define MPU401_INFO_IRQ_HOOK	(1 << 5)	/* mpu401 irq handler is called
+						   from driver irq handler */
 #define MPU401_INFO_NO_ACK	(1 << 6)	/* No ACK cmd needed */
+#define MPU401_INFO_USE_TIMER	(1 << 15)	/* internal */
 
 #define MPU401_MODE_BIT_INPUT		0
 #define MPU401_MODE_BIT_OUTPUT		1
@@ -73,8 +76,7 @@ struct snd_mpu401 {
 	unsigned long port;		/* base port of MPU-401 chip */
 	unsigned long cport;		/* port + 1 (usually) */
 	struct resource *res;		/* port resource */
-	int irq;			/* IRQ number of MPU-401 chip (-1 = poll) */
-	int irq_flags;
+	int irq;			/* IRQ number of MPU-401 chip */
 
 	unsigned long mode;		/* MPU401_MODE_XXXX */
 	int timer_invoked;
@@ -131,7 +133,6 @@ int snd_mpu401_uart_new(struct snd_card *card,
 			unsigned long port,
 			unsigned int info_flags,
 			int irq,
-			int irq_flags,
 			struct snd_rawmidi ** rrawmidi);
 
 #endif /* __SOUND_MPU401_H */

include/sound/pcm.h

@@ -825,6 +825,8 @@ int snd_pcm_hw_constraint_step(struct snd_pcm_runtime *runtime,
 int snd_pcm_hw_constraint_pow2(struct snd_pcm_runtime *runtime,
 			       unsigned int cond,
 			       snd_pcm_hw_param_t var);
+int snd_pcm_hw_rule_noresample(struct snd_pcm_runtime *runtime,
+			       unsigned int base_rate);
 int snd_pcm_hw_rule_add(struct snd_pcm_runtime *runtime,
 			unsigned int cond,
 			int var,
@@ -1035,6 +1037,8 @@ static inline void snd_pcm_mmap_data_close(struct vm_area_struct *area)
 	atomic_dec(&substream->mmap_count);
 }
 
+int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream,
+			     struct vm_area_struct *area);
 /* mmap for io-memory area */
 #if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_ALPHA)
 #define SNDRV_PCM_INFO_MMAP_IOMEM	SNDRV_PCM_INFO_MMAP

include/sound/saif.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOUND_SAIF_H__
+#define __SOUND_SAIF_H__
+
+struct mxs_saif_platform_data {
+	int (*init) (void);
+	int (*get_master_id) (unsigned int saif_id);
+};
+#endif

include/sound/soc-dai.h

@@ -24,13 +24,13 @@ struct snd_pcm_substream;
  * Describes the physical PCM data formating and clocking. Add new formats
  * to the end.
  */
-#define SND_SOC_DAIFMT_I2S		0 /* I2S mode */
-#define SND_SOC_DAIFMT_RIGHT_J		1 /* Right Justified mode */
-#define SND_SOC_DAIFMT_LEFT_J		2 /* Left Justified mode */
-#define SND_SOC_DAIFMT_DSP_A		3 /* L data MSB after FRM LRC */
-#define SND_SOC_DAIFMT_DSP_B		4 /* L data MSB during FRM LRC */
-#define SND_SOC_DAIFMT_AC97		5 /* AC97 */
-#define SND_SOC_DAIFMT_PDM		6 /* Pulse density modulation */
+#define SND_SOC_DAIFMT_I2S		1 /* I2S mode */
+#define SND_SOC_DAIFMT_RIGHT_J		2 /* Right Justified mode */
+#define SND_SOC_DAIFMT_LEFT_J		3 /* Left Justified mode */
+#define SND_SOC_DAIFMT_DSP_A		4 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
+#define SND_SOC_DAIFMT_AC97		6 /* AC97 */
+#define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
 
 /* left and right justified also known as MSB and LSB respectively */
 #define SND_SOC_DAIFMT_MSB		SND_SOC_DAIFMT_LEFT_J
@@ -42,8 +42,8 @@ struct snd_pcm_substream;
  * DAI bit clocks can be be gated (disabled) when the DAI is not
  * sending or receiving PCM data in a frame. This can be used to save power.
  */
-#define SND_SOC_DAIFMT_CONT		(0 << 4) /* continuous clock */
-#define SND_SOC_DAIFMT_GATED		(1 << 4) /* clock is gated */
+#define SND_SOC_DAIFMT_CONT		(1 << 4) /* continuous clock */
+#define SND_SOC_DAIFMT_GATED		(2 << 4) /* clock is gated */
 
 /*
  * DAI hardware signal inversions.
@@ -51,10 +51,10 @@ struct snd_pcm_substream;
  * Specifies whether the DAI can also support inverted clocks for the specified
  * format.
  */
-#define SND_SOC_DAIFMT_NB_NF		(0 << 8) /* normal bit clock + frame */
-#define SND_SOC_DAIFMT_NB_IF		(1 << 8) /* normal BCLK + inv FRM */
-#define SND_SOC_DAIFMT_IB_NF		(2 << 8) /* invert BCLK + nor FRM */
-#define SND_SOC_DAIFMT_IB_IF		(3 << 8) /* invert BCLK + FRM */
+#define SND_SOC_DAIFMT_NB_NF		(1 << 8) /* normal bit clock + frame */
+#define SND_SOC_DAIFMT_NB_IF		(2 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF		(3 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF		(4 << 8) /* invert BCLK + FRM */
 
 /*
  * DAI hardware clock masters.
@@ -63,10 +63,10 @@ struct snd_pcm_substream;
  * i.e. if the codec is clk and FRM master then the interface is
  * clk and frame slave.
  */
-#define SND_SOC_DAIFMT_CBM_CFM		(0 << 12) /* codec clk & FRM master */
-#define SND_SOC_DAIFMT_CBS_CFM		(1 << 12) /* codec clk slave & FRM master */
-#define SND_SOC_DAIFMT_CBM_CFS		(2 << 12) /* codec clk master & frame slave */
-#define SND_SOC_DAIFMT_CBS_CFS		(3 << 12) /* codec clk & FRM slave */
+#define SND_SOC_DAIFMT_CBM_CFM		(1 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM		(2 << 12) /* codec clk slave & FRM master */
+#define SND_SOC_DAIFMT_CBM_CFS		(3 << 12) /* codec clk master & frame slave */
+#define SND_SOC_DAIFMT_CBS_CFS		(4 << 12) /* codec clk & FRM slave */
 
 #define SND_SOC_DAIFMT_FORMAT_MASK	0x000f
 #define SND_SOC_DAIFMT_CLOCK_MASK	0x00f0
@@ -242,6 +242,9 @@ struct snd_soc_dai {
 	void *playback_dma_data;
 	void *capture_dma_data;
 
+	/* Symmetry data - only valid if symmetry is being enforced */
+	unsigned int rate;
+
 	/* parent platform/codec */
 	union {
 		struct snd_soc_platform *platform;

include/sound/soc-dapm.h

@@ -381,6 +381,9 @@ int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm,
 int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm,
 				const char *pin);
 
+/* Mostly internal - should not normally be used */
+void dapm_mark_dirty(struct snd_soc_dapm_widget *w, const char *reason);
+
 /* dapm widget types */
 enum snd_soc_dapm_type {
 	snd_soc_dapm_input = 0,		/* input pin */
@@ -473,6 +476,8 @@ struct snd_soc_dapm_widget {
 	unsigned char ext:1;			/* has external widgets */
 	unsigned char force:1;			/* force state */
 	unsigned char ignore_suspend:1;         /* kept enabled over suspend */
+	unsigned char new_power:1;		/* power from this run */
+	unsigned char power_checked:1;		/* power checked this run */
 	int subseq;				/* sort within widget type */
 
 	int (*power_check)(struct snd_soc_dapm_widget *w);
@@ -492,6 +497,9 @@ struct snd_soc_dapm_widget {
 
 	/* used during DAPM updates */
 	struct list_head power_list;
+	struct list_head dirty;
+	int inputs;
+	int outputs;
 };
 
 struct snd_soc_dapm_update {
@@ -524,6 +532,8 @@ struct snd_soc_dapm_context {
 	enum snd_soc_bias_level target_bias_level;
 	struct list_head list;
 
+	int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs_dapm;
 #endif
@@ -535,4 +545,10 @@ struct snd_soc_dapm_widget_list {
 	struct snd_soc_dapm_widget *widgets[0];
 };
 
+struct snd_soc_dapm_stats {
+	int power_checks;
+	int path_checks;
+	int neighbour_checks;
+};
+
 #endif

include/sound/soc.h

@@ -19,6 +19,7 @@
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/regmap.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/control.h>
@@ -27,13 +28,20 @@
 /*
  * Convenience kcontrol builders
  */
-#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \
+#define SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, xmax, xinvert) \
 	((unsigned long)&(struct soc_mixer_control) \
-	{.reg = xreg, .shift = xshift, .rshift = xshift, .max = xmax, \
-	.platform_max = xmax, .invert = xinvert})
+	{.reg = xreg, .rreg = xreg, .shift = shift_left, \
+	.rshift = shift_right, .max = xmax, .platform_max = xmax, \
+	.invert = xinvert})
+#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \
+	SOC_DOUBLE_VALUE(xreg, xshift, xshift, xmax, xinvert)
 #define SOC_SINGLE_VALUE_EXT(xreg, xmax, xinvert) \
 	((unsigned long)&(struct soc_mixer_control) \
 	{.reg = xreg, .max = xmax, .platform_max = xmax, .invert = xinvert})
+#define SOC_DOUBLE_R_VALUE(xlreg, xrreg, xshift, xmax, xinvert) \
+	((unsigned long)&(struct soc_mixer_control) \
+	{.reg = xlreg, .rreg = xrreg, .shift = xshift, .rshift = xshift, \
+	.max = xmax, .platform_max = xmax, .invert = xinvert})
 #define SOC_SINGLE(xname, reg, shift, max, invert) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
@@ -47,40 +55,36 @@
 	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
 	.put = snd_soc_put_volsw, \
 	.private_value =  SOC_SINGLE_VALUE(reg, shift, max, invert) }
-#define SOC_DOUBLE(xname, xreg, shift_left, shift_right, xmax, xinvert) \
+#define SOC_DOUBLE(xname, reg, shift_left, shift_right, max, invert) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
 	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
 	.put = snd_soc_put_volsw, \
-	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
-		 .max = xmax, .platform_max = xmax, .invert = xinvert} }
+	.private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
+					  max, invert) }
 #define SOC_DOUBLE_R(xname, reg_left, reg_right, xshift, xmax, xinvert) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
-	.info = snd_soc_info_volsw_2r, \
-	.get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \
-	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
-		.max = xmax, .platform_max = xmax, .invert = xinvert} }
-#define SOC_DOUBLE_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert, tlv_array) \
+	.info = snd_soc_info_volsw, \
+	.get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
+	.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+					    xmax, xinvert) }
+#define SOC_DOUBLE_TLV(xname, reg, shift_left, shift_right, max, invert, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
 		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
 	.tlv.p = (tlv_array), \
 	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
 	.put = snd_soc_put_volsw, \
-	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = xreg, .shift = shift_left, .rshift = shift_right,\
-		 .max = xmax, .platform_max = xmax, .invert = xinvert} }
+	.private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
+					  max, invert) }
 #define SOC_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
 		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
 	.tlv.p = (tlv_array), \
-	.info = snd_soc_info_volsw_2r, \
-	.get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \
-	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
-		.max = xmax, .platform_max = xmax, .invert = xinvert} }
+	.info = snd_soc_info_volsw, \
+	.get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
+	.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+					    xmax, xinvert) }
 #define SOC_DOUBLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \
 {	.iface  = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
@@ -120,14 +124,13 @@
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
-#define SOC_DOUBLE_EXT(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+#define SOC_DOUBLE_EXT(xname, reg, shift_left, shift_right, max, invert,\
 	 xhandler_get, xhandler_put) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
-	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
-		 .max = xmax, .platform_max = xmax, .invert = xinvert} }
+	.private_value = \
+		SOC_DOUBLE_VALUE(reg, shift_left, shift_right, max, invert) }
 #define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -145,20 +148,18 @@
 	.tlv.p = (tlv_array), \
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
-	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
-		.max = xmax, .platform_max = xmax, .invert = xinvert} }
+	.private_value = SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, \
+					  xmax, xinvert) }
 #define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
 		 SNDRV_CTL_ELEM_ACCESS_READWRITE, \
 	.tlv.p = (tlv_array), \
-	.info = snd_soc_info_volsw_2r, \
+	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
-	.private_value = (unsigned long)&(struct soc_mixer_control) \
-		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
-		.max = xmax, .platform_max = xmax, .invert = xinvert} }
+	.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+					    xmax, xinvert) }
 #define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = snd_soc_info_bool_ext, \
@@ -260,6 +261,7 @@ extern struct snd_ac97_bus_ops soc_ac97_ops;
 enum snd_soc_control_type {
 	SND_SOC_I2C = 1,
 	SND_SOC_SPI,
+	SND_SOC_REGMAP,
 };
 
 enum snd_soc_compress_type {
@@ -274,7 +276,7 @@ enum snd_soc_pcm_subclass {
 };
 
 int snd_soc_codec_set_sysclk(struct snd_soc_codec *codec, int clk_id,
-			     unsigned int freq, int dir);
+			     int source, unsigned int freq, int dir);
 int snd_soc_codec_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
 			  unsigned int freq_in, unsigned int freq_out);
 
@@ -391,12 +393,8 @@ int snd_soc_get_volsw(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
-int snd_soc_info_volsw_2r(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_info *uinfo);
-int snd_soc_get_volsw_2r(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol);
-int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol);
+#define snd_soc_get_volsw_2r snd_soc_get_volsw
+#define snd_soc_put_volsw_2r snd_soc_put_volsw
 int snd_soc_info_volsw_s8(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_info *uinfo);
 int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol,
@@ -576,9 +574,11 @@ struct snd_soc_codec {
 	const void *reg_def_copy;
 	const struct snd_soc_cache_ops *cache_ops;
 	struct mutex cache_rw_mutex;
+	int val_bytes;
 
 	/* dapm */
 	struct snd_soc_dapm_context dapm;
+	unsigned int ignore_pmdown_time:1; /* pmdown_time is ignored at stop */
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs_codec_root;
@@ -607,7 +607,7 @@ struct snd_soc_codec_driver {
 
 	/* codec wide operations */
 	int (*set_sysclk)(struct snd_soc_codec *codec,
-			  int clk_id, unsigned int freq, int dir);
+			  int clk_id, int source, unsigned int freq, int dir);
 	int (*set_pll)(struct snd_soc_codec *codec, int pll_id, int source,
 		unsigned int freq_in, unsigned int freq_out);
 
@@ -619,7 +619,7 @@ struct snd_soc_codec_driver {
 	int (*volatile_register)(struct snd_soc_codec *, unsigned int);
 	int (*readable_register)(struct snd_soc_codec *, unsigned int);
 	int (*writable_register)(struct snd_soc_codec *, unsigned int);
-	short reg_cache_size;
+	unsigned int reg_cache_size;
 	short reg_cache_step;
 	short reg_word_size;
 	const void *reg_cache_default;
@@ -630,10 +630,14 @@ struct snd_soc_codec_driver {
 	/* codec bias level */
 	int (*set_bias_level)(struct snd_soc_codec *,
 			      enum snd_soc_bias_level level);
+	bool idle_bias_off;
 
 	void (*seq_notifier)(struct snd_soc_dapm_context *,
 			     enum snd_soc_dapm_type, int);
 
+	/* codec stream completion event */
+	int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
 	/* probe ordering - for components with runtime dependencies */
 	int probe_order;
 	int remove_order;
@@ -669,6 +673,9 @@ struct snd_soc_platform_driver {
 	/* platform stream ops */
 	struct snd_pcm_ops *ops;
 
+	/* platform stream completion event */
+	int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
 	/* probe ordering - for components with runtime dependencies */
 	int probe_order;
 	int remove_order;
@@ -703,6 +710,8 @@ struct snd_soc_dai_link {
 	const char *cpu_dai_name;
 	const char *codec_dai_name;
 
+	unsigned int dai_fmt;           /* format to set on init */
+
 	/* Keep DAI active over suspend */
 	unsigned int ignore_suspend:1;
 
@@ -815,9 +824,11 @@ struct snd_soc_card {
 	struct list_head widgets;
 	struct list_head paths;
 	struct list_head dapm_list;
+	struct list_head dapm_dirty;
 
 	/* Generic DAPM context for the card */
 	struct snd_soc_dapm_context dapm;
+	struct snd_soc_dapm_stats dapm_stats;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs_card_root;
@@ -840,8 +851,6 @@ struct snd_soc_pcm_runtime  {
 	unsigned int complete:1;
 	unsigned int dev_registered:1;
 
-	/* Symmetry data - only valid if symmetry is being enforced */
-	unsigned int rate;
 	long pmdown_time;
 
 	/* runtime devices */
@@ -936,6 +945,18 @@ static inline void snd_soc_initialize_card_lists(struct snd_soc_card *card)
 	INIT_LIST_HEAD(&card->dapm_list);
 }
 
+static inline bool snd_soc_volsw_is_stereo(struct soc_mixer_control *mc)
+{
+	if (mc->reg == mc->rreg && mc->shift == mc->rshift)
+		return 0;
+	/*
+	 * mc->reg == mc->rreg && mc->shift != mc->rshift, or
+	 * mc->reg != mc->rreg means that the control is
+	 * stereo (bits in one register or in two registers)
+	 */
+	return 1;
+}
+
 int snd_soc_util_init(void);
 void snd_soc_util_exit(void);
 

include/sound/tpa6130a2-plat.h

@@ -23,13 +23,7 @@
 #ifndef TPA6130A2_PLAT_H
 #define TPA6130A2_PLAT_H
 
-enum tpa_model {
-	TPA6130A2,
-	TPA6140A2,
-};
-
 struct tpa6130a2_platform_data {
-	enum tpa_model id;
 	int power_gpio;
 };
 

include/sound/wm1250-ev1.h

@@ -0,0 +1,27 @@
+/*
+ * linux/sound/wm1250-ev1.h - Platform data for WM1250-EV1
+ *
+ * Copyright 2011 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM1250_EV1_H
+#define __LINUX_SND_WM1250_EV1_H
+
+#define WM1250_EV1_NUM_GPIOS 5
+
+#define WM1250_EV1_GPIO_CLK_ENA  0
+#define WM1250_EV1_GPIO_CLK_SEL0 1
+#define WM1250_EV1_GPIO_CLK_SEL1 2
+#define WM1250_EV1_GPIO_OSR      3
+#define WM1250_EV1_GPIO_MASTER   4
+
+
+struct wm1250_ev1_pdata {
+	int gpios[WM1250_EV1_NUM_GPIOS];
+};
+
+#endif

include/sound/wm5100.h

@@ -0,0 +1,59 @@
+/*
+ * linux/sound/wm5100.h -- Platform data for WM5100
+ *
+ * Copyright 2011 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM5100_H
+#define __LINUX_SND_WM5100_H
+
+enum wm5100_in_mode {
+	WM5100_IN_SE = 0,
+	WM5100_IN_DIFF = 1,
+	WM5100_IN_DMIC = 2,
+};
+
+enum wm5100_dmic_sup {
+	WM5100_DMIC_SUP_MICVDD = 0,
+	WM5100_DMIC_SUP_MICBIAS1 = 1,
+	WM5100_DMIC_SUP_MICBIAS2 = 2,
+	WM5100_DMIC_SUP_MICBIAS3 = 3,
+};
+
+enum wm5100_micdet_bias {
+	WM5100_MICDET_MICBIAS1 = 0,
+	WM5100_MICDET_MICBIAS2 = 1,
+	WM5100_MICDET_MICBIAS3 = 2,
+};
+
+struct wm5100_jack_mode {
+	enum wm5100_micdet_bias bias;
+	int hp_pol;
+	int micd_src;
+};
+
+#define WM5100_GPIO_SET 0x10000
+
+struct wm5100_pdata {
+	int reset;      /** GPIO controlling /RESET, if any */
+	int ldo_ena;    /** GPIO controlling LODENA, if any */
+	int hp_pol;     /** GPIO controlling headset polarity, if any */
+	int irq_flags;
+	int gpio_base;
+
+	struct wm5100_jack_mode jack_modes[2];
+
+	/* Input pin mode selection */
+	enum wm5100_in_mode in_mode[4];
+
+	/* DMIC supply selection */
+	enum wm5100_dmic_sup dmic_sup[4];
+
+	int gpio_defaults[6];
+};
+
+#endif

include/trace/events/asoc.h

@@ -216,6 +216,31 @@ DEFINE_EVENT(snd_soc_dapm_widget, snd_soc_dapm_widget_event_done,
 
 );
 
+TRACE_EVENT(snd_soc_dapm_walk_done,
+
+	TP_PROTO(struct snd_soc_card *card),
+
+	TP_ARGS(card),
+
+	TP_STRUCT__entry(
+		__string(	name,	card->name		)
+		__field(	int,	power_checks		)
+		__field(	int,	path_checks		)
+		__field(	int,	neighbour_checks	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, card->name);
+		__entry->power_checks = card->dapm_stats.power_checks;
+		__entry->path_checks = card->dapm_stats.path_checks;
+		__entry->neighbour_checks = card->dapm_stats.neighbour_checks;
+	),
+
+	TP_printk("%s: checks %d power, %d path, %d neighbour",
+		  __get_str(name), (int)__entry->power_checks,
+		  (int)__entry->path_checks, (int)__entry->neighbour_checks)
+);
+
 TRACE_EVENT(snd_soc_jack_irq,
 
 	TP_PROTO(const char *name),

sound/aoa/codecs/onyx.c

@@ -1067,7 +1067,6 @@ static int onyx_i2c_probe(struct i2c_client *client,
 	printk(KERN_DEBUG PFX "created and attached onyx instance\n");
 	return 0;
  fail:
-	i2c_set_clientdata(client, NULL);
 	kfree(onyx);
 	return -ENODEV;
 }
@@ -1112,8 +1111,7 @@ static int onyx_i2c_remove(struct i2c_client *client)
 
 	aoa_codec_unregister(&onyx->codec);
 	of_node_put(onyx->codec.node);
-	if (onyx->codec_info)
-		kfree(onyx->codec_info);
+	kfree(onyx->codec_info);
 	kfree(onyx);
 	return 0;
 }

sound/arm/aaci.c

@@ -443,7 +443,7 @@ static int aaci_pcm_open(struct snd_pcm_substream *substream)
 	mutex_lock(&aaci->irq_lock);
 	if (!aaci->users++) {
 		ret = request_irq(aaci->dev->irq[0], aaci_irq,
-			   IRQF_SHARED | IRQF_DISABLED, DRIVER_NAME, aaci);
+			   IRQF_SHARED, DRIVER_NAME, aaci);
 		if (ret != 0)
 			aaci->users--;
 	}

sound/arm/pxa2xx-ac97-lib.c

@@ -359,7 +359,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 	if (ret)
 		goto err_clk2;
 
-	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
+	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL);
 	if (ret < 0)
 		goto err_irq;
 

sound/core/control.c

@@ -989,7 +989,6 @@ struct user_element {
 	void *tlv_data;			/* TLV data */
 	unsigned long tlv_data_size;	/* TLV data size */
 	void *priv_data;		/* private data (like strings for enumerated type) */
-	unsigned long priv_data_size;	/* size of private data in bytes */
 };
 
 static int snd_ctl_elem_user_info(struct snd_kcontrol *kcontrol,
@@ -1001,6 +1000,28 @@ static int snd_ctl_elem_user_info(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int snd_ctl_elem_user_enum_info(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_info *uinfo)
+{
+	struct user_element *ue = kcontrol->private_data;
+	const char *names;
+	unsigned int item;
+
+	item = uinfo->value.enumerated.item;
+
+	*uinfo = ue->info;
+
+	item = min(item, uinfo->value.enumerated.items - 1);
+	uinfo->value.enumerated.item = item;
+
+	names = ue->priv_data;
+	for (; item > 0; --item)
+		names += strlen(names) + 1;
+	strcpy(uinfo->value.enumerated.name, names);
+
+	return 0;
+}
+
 static int snd_ctl_elem_user_get(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
 {
@@ -1055,11 +1076,46 @@ static int snd_ctl_elem_user_tlv(struct snd_kcontrol *kcontrol,
 	return change;
 }
 
+static int snd_ctl_elem_init_enum_names(struct user_element *ue)
+{
+	char *names, *p;
+	size_t buf_len, name_len;
+	unsigned int i;
+
+	if (ue->info.value.enumerated.names_length > 64 * 1024)
+		return -EINVAL;
+
+	names = memdup_user(
+		(const void __user *)ue->info.value.enumerated.names_ptr,
+		ue->info.value.enumerated.names_length);
+	if (IS_ERR(names))
+		return PTR_ERR(names);
+
+	/* check that there are enough valid names */
+	buf_len = ue->info.value.enumerated.names_length;
+	p = names;
+	for (i = 0; i < ue->info.value.enumerated.items; ++i) {
+		name_len = strnlen(p, buf_len);
+		if (name_len == 0 || name_len >= 64 || name_len == buf_len) {
+			kfree(names);
+			return -EINVAL;
+		}
+		p += name_len + 1;
+		buf_len -= name_len + 1;
+	}
+
+	ue->priv_data = names;
+	ue->info.value.enumerated.names_ptr = 0;
+
+	return 0;
+}
+
 static void snd_ctl_elem_user_free(struct snd_kcontrol *kcontrol)
 {
 	struct user_element *ue = kcontrol->private_data;
-	if (ue->tlv_data)
-		kfree(ue->tlv_data);
+
+	kfree(ue->tlv_data);
+	kfree(ue->priv_data);
 	kfree(ue);
 }
 
@@ -1072,8 +1128,8 @@ static int snd_ctl_elem_add(struct snd_ctl_file *file,
 	long private_size;
 	struct user_element *ue;
 	int idx, err;
-	
-	if (card->user_ctl_count >= MAX_USER_CONTROLS)
+
+	if (!replace && card->user_ctl_count >= MAX_USER_CONTROLS)
 		return -ENOMEM;
 	if (info->count < 1)
 		return -EINVAL;
@@ -1101,7 +1157,10 @@ static int snd_ctl_elem_add(struct snd_ctl_file *file,
 	memcpy(&kctl.id, &info->id, sizeof(info->id));
 	kctl.count = info->owner ? info->owner : 1;
 	access |= SNDRV_CTL_ELEM_ACCESS_USER;
-	kctl.info = snd_ctl_elem_user_info;
+	if (info->type == SNDRV_CTL_ELEM_TYPE_ENUMERATED)
+		kctl.info = snd_ctl_elem_user_enum_info;
+	else
+		kctl.info = snd_ctl_elem_user_info;
 	if (access & SNDRV_CTL_ELEM_ACCESS_READ)
 		kctl.get = snd_ctl_elem_user_get;
 	if (access & SNDRV_CTL_ELEM_ACCESS_WRITE)
@@ -1122,6 +1181,11 @@ static int snd_ctl_elem_add(struct snd_ctl_file *file,
 		if (info->count > 64)
 			return -EINVAL;
 		break;
+	case SNDRV_CTL_ELEM_TYPE_ENUMERATED:
+		private_size = sizeof(unsigned int);
+		if (info->count > 128 || info->value.enumerated.items == 0)
+			return -EINVAL;
+		break;
 	case SNDRV_CTL_ELEM_TYPE_BYTES:
 		private_size = sizeof(unsigned char);
 		if (info->count > 512)
@@ -1143,9 +1207,17 @@ static int snd_ctl_elem_add(struct snd_ctl_file *file,
 	ue->info.access = 0;
 	ue->elem_data = (char *)ue + sizeof(*ue);
 	ue->elem_data_size = private_size;
+	if (ue->info.type == SNDRV_CTL_ELEM_TYPE_ENUMERATED) {
+		err = snd_ctl_elem_init_enum_names(ue);
+		if (err < 0) {
+			kfree(ue);
+			return err;
+		}
+	}
 	kctl.private_free = snd_ctl_elem_user_free;
 	_kctl = snd_ctl_new(&kctl, access);
 	if (_kctl == NULL) {
+		kfree(ue->priv_data);
 		kfree(ue);
 		return -ENOMEM;
 	}

sound/core/control_compat.c

@@ -83,6 +83,8 @@ struct snd_ctl_elem_info32 {
 			u32 items;
 			u32 item;
 			char name[64];
+			u64 names_ptr;
+			u32 names_length;
 		} enumerated;
 		unsigned char reserved[128];
 	} value;
@@ -372,6 +374,8 @@ static int snd_ctl_elem_add_compat(struct snd_ctl_file *file,
 				   &data32->value.enumerated,
 				   sizeof(data->value.enumerated)))
 			goto error;
+		data->value.enumerated.names_ptr =
+			(uintptr_t)compat_ptr(data->value.enumerated.names_ptr);
 		break;
 	default:
 		break;

sound/core/jack.c

@@ -30,6 +30,7 @@ static int jack_switch_types[] = {
 	SW_LINEOUT_INSERT,
 	SW_JACK_PHYSICAL_INSERT,
 	SW_VIDEOOUT_INSERT,
+	SW_LINEIN_INSERT,
 };
 
 static int snd_jack_dev_free(struct snd_device *device)

sound/core/oss/mixer_oss.c

@@ -499,7 +499,7 @@ static struct snd_kcontrol *snd_mixer_oss_test_id(struct snd_mixer_oss *mixer, c
 	
 	memset(&id, 0, sizeof(id));
 	id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
-	strcpy(id.name, name);
+	strlcpy(id.name, name, sizeof(id.name));
 	id.index = index;
 	return snd_ctl_find_id(card, &id);
 }

sound/core/pcm_lib.c

@@ -1399,6 +1399,32 @@ int snd_pcm_hw_constraint_pow2(struct snd_pcm_runtime *runtime,
 
 EXPORT_SYMBOL(snd_pcm_hw_constraint_pow2);
 
+static int snd_pcm_hw_rule_noresample_func(struct snd_pcm_hw_params *params,
+					   struct snd_pcm_hw_rule *rule)
+{
+	unsigned int base_rate = (unsigned int)(uintptr_t)rule->private;
+	struct snd_interval *rate;
+
+	rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
+	return snd_interval_list(rate, 1, &base_rate, 0);
+}
+
+/**
+ * snd_pcm_hw_rule_noresample - add a rule to allow disabling hw resampling
+ * @runtime: PCM runtime instance
+ * @base_rate: the rate at which the hardware does not resample
+ */
+int snd_pcm_hw_rule_noresample(struct snd_pcm_runtime *runtime,
+			       unsigned int base_rate)
+{
+	return snd_pcm_hw_rule_add(runtime, SNDRV_PCM_HW_PARAMS_NORESAMPLE,
+				   SNDRV_PCM_HW_PARAM_RATE,
+				   snd_pcm_hw_rule_noresample_func,
+				   (void *)(uintptr_t)base_rate,
+				   SNDRV_PCM_HW_PARAM_RATE, -1);
+}
+EXPORT_SYMBOL(snd_pcm_hw_rule_noresample);
+
 static void _snd_pcm_hw_param_any(struct snd_pcm_hw_params *params,
 				  snd_pcm_hw_param_t var)
 {

sound/core/pcm_native.c

@@ -2058,16 +2058,12 @@ EXPORT_SYMBOL(snd_pcm_open_substream);
 
 static int snd_pcm_open_file(struct file *file,
 			     struct snd_pcm *pcm,
-			     int stream,
-			     struct snd_pcm_file **rpcm_file)
+			     int stream)
 {
 	struct snd_pcm_file *pcm_file;
 	struct snd_pcm_substream *substream;
 	int err;
 
-	if (rpcm_file)
-		*rpcm_file = NULL;
-
 	err = snd_pcm_open_substream(pcm, stream, file, &substream);
 	if (err < 0)
 		return err;
@@ -2083,8 +2079,7 @@ static int snd_pcm_open_file(struct file *file,
 		substream->pcm_release = pcm_release_private;
 	}
 	file->private_data = pcm_file;
-	if (rpcm_file)
-		*rpcm_file = pcm_file;
+
 	return 0;
 }
 
@@ -2113,7 +2108,6 @@ static int snd_pcm_capture_open(struct inode *inode, struct file *file)
 static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream)
 {
 	int err;
-	struct snd_pcm_file *pcm_file;
 	wait_queue_t wait;
 
 	if (pcm == NULL) {
@@ -2131,7 +2125,7 @@ static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream)
 	add_wait_queue(&pcm->open_wait, &wait);
 	mutex_lock(&pcm->open_mutex);
 	while (1) {
-		err = snd_pcm_open_file(file, pcm, stream, &pcm_file);
+		err = snd_pcm_open_file(file, pcm, stream);
 		if (err >= 0)
 			break;
 		if (err == -EAGAIN) {
@@ -3156,8 +3150,8 @@ static const struct vm_operations_struct snd_pcm_vm_ops_data_fault = {
 /*
  * mmap the DMA buffer on RAM
  */
-static int snd_pcm_default_mmap(struct snd_pcm_substream *substream,
-				struct vm_area_struct *area)
+int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream,
+			     struct vm_area_struct *area)
 {
 	area->vm_flags |= VM_RESERVED;
 #ifdef ARCH_HAS_DMA_MMAP_COHERENT
@@ -3177,6 +3171,7 @@ static int snd_pcm_default_mmap(struct snd_pcm_substream *substream,
 	area->vm_ops = &snd_pcm_vm_ops_data_fault;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(snd_pcm_lib_default_mmap);
 
 /*
  * mmap the DMA buffer on I/O memory area
@@ -3242,7 +3237,7 @@ int snd_pcm_mmap_data(struct snd_pcm_substream *substream, struct file *file,
 	if (substream->ops->mmap)
 		err = substream->ops->mmap(substream, area);
 	else
-		err = snd_pcm_default_mmap(substream, area);
+		err = snd_pcm_lib_default_mmap(substream, area);
 	if (!err)
 		atomic_inc(&substream->mmap_count);
 	return err;

sound/drivers/aloop.c

@@ -575,7 +575,8 @@ static void loopback_runtime_free(struct snd_pcm_runtime *runtime)
 static int loopback_hw_params(struct snd_pcm_substream *substream,
 			      struct snd_pcm_hw_params *params)
 {
-	return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	return snd_pcm_lib_alloc_vmalloc_buffer(substream,
+						params_buffer_bytes(params));
 }
 
 static int loopback_hw_free(struct snd_pcm_substream *substream)
@@ -587,7 +588,7 @@ static int loopback_hw_free(struct snd_pcm_substream *substream)
 	mutex_lock(&dpcm->loopback->cable_lock);
 	cable->valid &= ~(1 << substream->stream);
 	mutex_unlock(&dpcm->loopback->cable_lock);
-	return snd_pcm_lib_free_pages(substream);
+	return snd_pcm_lib_free_vmalloc_buffer(substream);
 }
 
 static unsigned int get_cable_index(struct snd_pcm_substream *substream)
@@ -740,6 +741,8 @@ static struct snd_pcm_ops loopback_playback_ops = {
 	.prepare =	loopback_prepare,
 	.trigger =	loopback_trigger,
 	.pointer =	loopback_pointer,
+	.page =		snd_pcm_lib_get_vmalloc_page,
+	.mmap =		snd_pcm_lib_mmap_vmalloc,
 };
 
 static struct snd_pcm_ops loopback_capture_ops = {
@@ -751,6 +754,8 @@ static struct snd_pcm_ops loopback_capture_ops = {
 	.prepare =	loopback_prepare,
 	.trigger =	loopback_trigger,
 	.pointer =	loopback_pointer,
+	.page =		snd_pcm_lib_get_vmalloc_page,
+	.mmap =		snd_pcm_lib_mmap_vmalloc,
 };
 
 static int __devinit loopback_pcm_new(struct loopback *loopback,
@@ -771,10 +776,6 @@ static int __devinit loopback_pcm_new(struct loopback *loopback,
 	strcpy(pcm->name, "Loopback PCM");
 
 	loopback->pcm[device] = pcm;
-
-	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
-			snd_dma_continuous_data(GFP_KERNEL),
-			0, 2 * 1024 * 1024);
 	return 0;
 }
 

sound/drivers/ml403-ac97cr.c

@@ -1153,7 +1153,7 @@ snd_ml403_ac97cr_create(struct snd_card *card, struct platform_device *pfdev,
 		   "0x%x done\n", (unsigned int)ml403_ac97cr->port);
 	/* get irq */
 	irq = platform_get_irq(pfdev, 0);
-	if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED,
+	if (request_irq(irq, snd_ml403_ac97cr_irq, 0,
 			dev_name(&pfdev->dev), (void *)ml403_ac97cr)) {
 		snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": "
 			   "unable to grab IRQ %d\n",
@@ -1166,7 +1166,7 @@ snd_ml403_ac97cr_create(struct snd_card *card, struct platform_device *pfdev,
 		   "request (playback) irq %d done\n",
 		   ml403_ac97cr->irq);
 	irq = platform_get_irq(pfdev, 1);
-	if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED,
+	if (request_irq(irq, snd_ml403_ac97cr_irq, 0,
 			dev_name(&pfdev->dev), (void *)ml403_ac97cr)) {
 		snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": "
 			   "unable to grab IRQ %d\n",

sound/drivers/mpu401/mpu401.c

@@ -86,8 +86,7 @@ static int snd_mpu401_create(int dev, struct snd_card **rcard)
 	}
 
 	err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port[dev], 0,
-				  irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0,
-				  NULL);
+				  irq[dev], NULL);
 	if (err < 0) {
 		printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
 		goto _err;

sound/drivers/mpu401/mpu401_uart.c

@@ -3,7 +3,7 @@
  *  Routines for control of MPU-401 in UART mode
  *
  *  MPU-401 supports UART mode which is not capable generate transmit
- *  interrupts thus output is done via polling. Also, if irq < 0, then
+ *  interrupts thus output is done via polling. Without interrupt,
  *  input is done also via polling. Do not expect good performance.
  *
  *
@@ -374,7 +374,7 @@ snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substream, int up)
 			/* first time - flush FIFO */
 			while (max-- > 0)
 				mpu->read(mpu, MPU401D(mpu));
-			if (mpu->irq < 0)
+			if (mpu->info_flags & MPU401_INFO_USE_TIMER)
 				snd_mpu401_uart_add_timer(mpu, 1);
 		}
 		
@@ -383,7 +383,7 @@ snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substream, int up)
 		snd_mpu401_uart_input_read(mpu);
 		spin_unlock_irqrestore(&mpu->input_lock, flags);
 	} else {
-		if (mpu->irq < 0)
+		if (mpu->info_flags & MPU401_INFO_USE_TIMER)
 			snd_mpu401_uart_remove_timer(mpu, 1);
 		clear_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode);
 	}
@@ -496,7 +496,7 @@ static struct snd_rawmidi_ops snd_mpu401_uart_input =
 static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
 {
 	struct snd_mpu401 *mpu = rmidi->private_data;
-	if (mpu->irq_flags && mpu->irq >= 0)
+	if (mpu->irq >= 0)
 		free_irq(mpu->irq, (void *) mpu);
 	release_and_free_resource(mpu->res);
 	kfree(mpu);
@@ -509,8 +509,7 @@ static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
  * @hardware: the hardware type, MPU401_HW_XXXX
  * @port: the base address of MPU401 port
  * @info_flags: bitflags MPU401_INFO_XXX
- * @irq: the irq number, -1 if no interrupt for mpu
- * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved.
+ * @irq: the ISA irq number, -1 if not to be allocated
  * @rrawmidi: the pointer to store the new rawmidi instance
  *
  * Creates a new MPU-401 instance.
@@ -525,7 +524,7 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
 			unsigned short hardware,
 			unsigned long port,
 			unsigned int info_flags,
-			int irq, int irq_flags,
+			int irq,
 			struct snd_rawmidi ** rrawmidi)
 {
 	struct snd_mpu401 *mpu;
@@ -577,8 +576,8 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
 		mpu->cport = port + 2;
 	else
 		mpu->cport = port + 1;
-	if (irq >= 0 && irq_flags) {
-		if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags,
+	if (irq >= 0) {
+		if (request_irq(irq, snd_mpu401_uart_interrupt, 0,
 				"MPU401 UART", (void *) mpu)) {
 			snd_printk(KERN_ERR "mpu401_uart: "
 				   "unable to grab IRQ %d\n", irq);
@@ -586,9 +585,10 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
 			return -EBUSY;
 		}
 	}
+	if (irq < 0 && !(info_flags & MPU401_INFO_IRQ_HOOK))
+		info_flags |= MPU401_INFO_USE_TIMER;
 	mpu->info_flags = info_flags;
 	mpu->irq = irq;
-	mpu->irq_flags = irq_flags;
 	if (card->shortname[0])
 		snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI",
 			 card->shortname);

sound/drivers/mtpav.c

@@ -589,7 +589,7 @@ static int __devinit snd_mtpav_get_ISA(struct mtpav * mcard)
 		return -EBUSY;
 	}
 	mcard->port = port;
-	if (request_irq(irq, snd_mtpav_irqh, IRQF_DISABLED, "MOTU MTPAV", mcard)) {
+	if (request_irq(irq, snd_mtpav_irqh, 0, "MOTU MTPAV", mcard)) {
 		snd_printk(KERN_ERR "MTVAP IRQ %d busy\n", irq);
 		return -EBUSY;
 	}

sound/drivers/serial-u16550.c

@@ -816,7 +816,7 @@ static int __devinit snd_uart16550_create(struct snd_card *card,
 
 	if (irq >= 0 && irq != SNDRV_AUTO_IRQ) {
 		if (request_irq(irq, snd_uart16550_interrupt,
-				IRQF_DISABLED, "Serial MIDI", uart)) {
+				0, "Serial MIDI", uart)) {
 			snd_printk(KERN_WARNING
 				   "irq %d busy. Using Polling.\n", irq);
 		} else {

sound/firewire/isight.c

@@ -51,7 +51,6 @@ struct isight {
 	struct fw_unit *unit;
 	struct fw_device *device;
 	u64 audio_base;
-	struct fw_address_handler iris_handler;
 	struct snd_pcm_substream *pcm;
 	struct mutex mutex;
 	struct iso_packets_buffer buffer;

sound/firewire/speakers.c

@@ -778,9 +778,10 @@ static int __devexit fwspk_remove(struct device *dev)
 {
 	struct fwspk *fwspk = dev_get_drvdata(dev);
 
-	mutex_lock(&fwspk->mutex);
 	amdtp_out_stream_pcm_abort(&fwspk->stream);
 	snd_card_disconnect(fwspk->card);
+
+	mutex_lock(&fwspk->mutex);
 	fwspk_stop_stream(fwspk);
 	mutex_unlock(&fwspk->mutex);
 
@@ -796,8 +797,8 @@ static void fwspk_bus_reset(struct fw_unit *unit)
 	fcp_bus_reset(fwspk->unit);
 
 	if (cmp_connection_update(&fwspk->connection) < 0) {
-		mutex_lock(&fwspk->mutex);
 		amdtp_out_stream_pcm_abort(&fwspk->stream);
+		mutex_lock(&fwspk->mutex);
 		fwspk_stop_stream(fwspk);
 		mutex_unlock(&fwspk->mutex);
 		return;

sound/isa/ad1816a/ad1816a.c

@@ -204,7 +204,7 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard
 
 	if (mpu_port[dev] > 0) {
 		if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-					mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED,
+					mpu_port[dev], 0, mpu_irq[dev],
 					NULL) < 0)
 			printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", mpu_port[dev]);
 	}

sound/isa/ad1816a/ad1816a_lib.c

@@ -595,7 +595,7 @@ int __devinit snd_ad1816a_create(struct snd_card *card,
 		snd_ad1816a_free(chip);
 		return -EBUSY;
 	}
-	if (request_irq(irq, snd_ad1816a_interrupt, IRQF_DISABLED, "AD1816A", (void *) chip)) {
+	if (request_irq(irq, snd_ad1816a_interrupt, 0, "AD1816A", (void *) chip)) {
 		snd_printk(KERN_ERR "ad1816a: can't grab IRQ %d\n", irq);
 		snd_ad1816a_free(chip);
 		return -EBUSY;

sound/isa/als100.c

@@ -256,7 +256,6 @@ static int __devinit snd_card_als100_probe(int dev,
 					mpu_type,
 					mpu_port[dev], 0, 
 					mpu_irq[dev],
-					mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
 					NULL) < 0)
 			snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
 	}

sound/isa/azt2320.c

@@ -234,8 +234,7 @@ static int __devinit snd_card_azt2320_probe(int dev,
 	if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
 		if (snd_mpu401_uart_new(card, 0, MPU401_HW_AZT2320,
 				mpu_port[dev], 0,
-				mpu_irq[dev], IRQF_DISABLED,
-				NULL) < 0)
+				mpu_irq[dev], NULL) < 0)
 			snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
 	}
 

sound/isa/cmi8330.c

@@ -597,7 +597,7 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
 	if (mpuport[dev] != SNDRV_AUTO_PORT) {
 		if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
 					mpuport[dev], 0, mpuirq[dev],
-					IRQF_DISABLED, NULL) < 0)
+					NULL) < 0)
 			printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n",
 				mpuport[dev]);
 	}

sound/isa/cs423x/cs4231.c

@@ -131,7 +131,6 @@ static int __devinit snd_cs4231_probe(struct device *dev, unsigned int n)
 			mpu_irq[n] = -1;
 		if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
 					mpu_port[n], 0, mpu_irq[n],
-					mpu_irq[n] >= 0 ? IRQF_DISABLED : 0,
 					NULL) < 0)
 			dev_warn(dev, "MPU401 not detected\n");
 	}

sound/isa/cs423x/cs4236.c

@@ -449,8 +449,7 @@ static int __devinit snd_cs423x_probe(struct snd_card *card, int dev)
 			mpu_irq[dev] = -1;
 		if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
 					mpu_port[dev], 0,
-					mpu_irq[dev],
-					mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL) < 0)
+					mpu_irq[dev], NULL) < 0)
 			printk(KERN_WARNING IDENT ": MPU401 not detected\n");
 	}
 

sound/isa/es1688/es1688.c

@@ -174,7 +174,7 @@ static int __devinit snd_es1688_probe(struct snd_card *card, unsigned int n)
 			chip->mpu_port > 0) {
 		error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
 				chip->mpu_port, 0,
-				mpu_irq[n], IRQF_DISABLED, NULL);
+				mpu_irq[n], NULL);
 		if (error < 0)
 			return error;
 	}

sound/isa/es1688/es1688_lib.c

@@ -661,7 +661,7 @@ int snd_es1688_create(struct snd_card *card,
 		snd_printk(KERN_ERR "es1688: can't grab port 0x%lx\n", port + 4);
 		return -EBUSY;
 	}
-	if (request_irq(irq, snd_es1688_interrupt, IRQF_DISABLED, "ES1688", (void *) chip)) {
+	if (request_irq(irq, snd_es1688_interrupt, 0, "ES1688", (void *) chip)) {
 		snd_printk(KERN_ERR "es1688: can't grab IRQ %d\n", irq);
 		return -EBUSY;
 	}

sound/isa/es18xx.c

@@ -1805,7 +1805,7 @@ static int __devinit snd_es18xx_new_device(struct snd_card *card,
 		return -EBUSY;
 	}
 
-	if (request_irq(irq, snd_es18xx_interrupt, IRQF_DISABLED, "ES18xx",
+	if (request_irq(irq, snd_es18xx_interrupt, 0, "ES18xx",
 			(void *) card)) {
 		snd_es18xx_free(card);
 		snd_printk(KERN_ERR PFX "unable to grap IRQ %d\n", irq);
@@ -2160,8 +2160,8 @@ static int __devinit snd_audiodrive_probe(struct snd_card *card, int dev)
 
 	if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
 		err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES18XX,
-					  mpu_port[dev], 0,
-					  irq[dev], 0, &chip->rmidi);
+					  mpu_port[dev], MPU401_INFO_IRQ_HOOK,
+					  -1, &chip->rmidi);
 		if (err < 0)
 			return err;
 	}

sound/isa/galaxy/galaxy.c

@@ -585,8 +585,7 @@ static int __devinit snd_galaxy_probe(struct device *dev, unsigned int n)
 
 	if (mpu_port[n] >= 0) {
 		err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-					  mpu_port[n], 0, mpu_irq[n],
-					  IRQF_DISABLED, NULL);
+					  mpu_port[n], 0, mpu_irq[n], NULL);
 		if (err < 0)
 			goto error;
 	}

sound/isa/gus/gus_main.c

@@ -180,7 +180,7 @@ int snd_gus_create(struct snd_card *card,
 		snd_gus_free(gus);
 		return -EBUSY;
 	}
-	if (irq >= 0 && request_irq(irq, snd_gus_interrupt, IRQF_DISABLED, "GUS GF1", (void *) gus)) {
+	if (irq >= 0 && request_irq(irq, snd_gus_interrupt, 0, "GUS GF1", (void *) gus)) {
 		snd_printk(KERN_ERR "gus: can't grab irq %d\n", irq);
 		snd_gus_free(gus);
 		return -EBUSY;

sound/isa/gus/gusextreme.c

@@ -317,8 +317,7 @@ static int __devinit snd_gusextreme_probe(struct device *dev, unsigned int n)
 
 	if (es1688->mpu_port >= 0x300) {
 		error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
-				es1688->mpu_port, 0,
-				mpu_irq[n], IRQF_DISABLED, NULL);
+				es1688->mpu_port, 0, mpu_irq[n], NULL);
 		if (error < 0)
 			goto out;
 	}

sound/isa/gus/gusmax.c

@@ -291,7 +291,7 @@ static int __devinit snd_gusmax_probe(struct device *pdev, unsigned int dev)
 		goto _err;
 	}
 
-	if (request_irq(xirq, snd_gusmax_interrupt, IRQF_DISABLED, "GUS MAX", (void *)maxcard)) {
+	if (request_irq(xirq, snd_gusmax_interrupt, 0, "GUS MAX", (void *)maxcard)) {
 		snd_printk(KERN_ERR PFX "unable to grab IRQ %d\n", xirq);
 		err = -EBUSY;
 		goto _err;

sound/isa/gus/interwave.c

@@ -684,7 +684,7 @@ static int __devinit snd_interwave_probe(struct snd_card *card, int dev)
 	if ((err = snd_gus_initialize(gus)) < 0)
 		return err;
 
-	if (request_irq(xirq, snd_interwave_interrupt, IRQF_DISABLED,
+	if (request_irq(xirq, snd_interwave_interrupt, 0,
 			"InterWave", iwcard)) {
 		snd_printk(KERN_ERR PFX "unable to grab IRQ %d\n", xirq);
 		return -EBUSY;

sound/isa/msnd/msnd_pinnacle.c

@@ -600,7 +600,7 @@ static int __devinit snd_msnd_attach(struct snd_card *card)
 					  mpu_io[0],
 					  MPU401_MODE_INPUT |
 					  MPU401_MODE_OUTPUT,
-					  mpu_irq[0], IRQF_DISABLED,
+					  mpu_irq[0],
 					  &chip->rmidi);
 		if (err < 0) {
 			printk(KERN_ERR LOGNAME

sound/isa/opl3sa2.c

@@ -667,7 +667,7 @@ static int __devinit snd_opl3sa2_probe(struct snd_card *card, int dev)
 	err = snd_opl3sa2_detect(card);
 	if (err < 0)
 		return err;
-	err = request_irq(xirq, snd_opl3sa2_interrupt, IRQF_DISABLED,
+	err = request_irq(xirq, snd_opl3sa2_interrupt, 0,
 			  "OPL3-SA2", card);
 	if (err) {
 		snd_printk(KERN_ERR PFX "can't grab IRQ %d\n", xirq);
@@ -707,8 +707,9 @@ static int __devinit snd_opl3sa2_probe(struct snd_card *card, int dev)
 	}
 	if (midi_port[dev] >= 0x300 && midi_port[dev] < 0x340) {
 		if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_OPL3SA2,
-					       midi_port[dev], 0,
-					       xirq, 0, &chip->rmidi)) < 0)
+					       midi_port[dev],
+					       MPU401_INFO_IRQ_HOOK, -1,
+					       &chip->rmidi)) < 0)
 			return err;
 	}
 	sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",

sound/isa/opti9xx/miro.c

@@ -1377,8 +1377,7 @@ static int __devinit snd_miro_probe(struct snd_card *card)
 		rmidi = NULL;
 	else {
 		error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-				mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
-				&rmidi);
+				mpu_port, 0, miro->mpu_irq, &rmidi);
 		if (error < 0)
 			snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
 				   mpu_port);

sound/isa/opti9xx/opti92x-ad1848.c

@@ -892,7 +892,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 #endif
 #ifdef OPTi93X
 	error = request_irq(irq, snd_opti93x_interrupt,
-			    IRQF_DISABLED, DEV_NAME" - WSS", chip);
+			    0, DEV_NAME" - WSS", chip);
 	if (error < 0) {
 		snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", irq);
 		return error;
@@ -914,7 +914,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 		rmidi = NULL;
 	else {
 		error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-				mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi);
+				mpu_port, 0, mpu_irq, &rmidi);
 		if (error)
 			snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
 				   mpu_port);

sound/isa/sb/jazz16.c

@@ -322,7 +322,6 @@ static int __devinit snd_jazz16_probe(struct device *devptr, unsigned int dev)
 					MPU401_HW_MPU401,
 					mpu_port[dev], 0,
 					mpu_irq[dev],
-					mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
 					NULL) < 0)
 			snd_printk(KERN_ERR "no MPU-401 device at 0x%lx\n",
 					mpu_port[dev]);

sound/isa/sb/sb16.c

@@ -394,8 +394,9 @@ static int __devinit snd_sb16_probe(struct snd_card *card, int dev)
 
 	if (chip->mpu_port > 0 && chip->mpu_port != SNDRV_AUTO_PORT) {
 		if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SB,
-					       chip->mpu_port, 0,
-					       xirq, 0, &chip->rmidi)) < 0)
+					       chip->mpu_port,
+					       MPU401_INFO_IRQ_HOOK, -1,
+					       &chip->rmidi)) < 0)
 			return err;
 		chip->rmidi_callback = snd_mpu401_uart_interrupt;
 	}

sound/isa/sb/sb_common.c

@@ -240,7 +240,7 @@ int snd_sbdsp_create(struct snd_card *card,
 	if (request_irq(irq, irq_handler,
 			(hardware == SB_HW_ALS4000 ||
 			 hardware == SB_HW_CS5530) ?
-			IRQF_SHARED : IRQF_DISABLED,
+			IRQF_SHARED : 0,
 			"SoundBlaster", (void *) chip)) {
 		snd_printk(KERN_ERR "sb: can't grab irq %d\n", irq);
 		snd_sbdsp_free(chip);

sound/isa/sc6000.c

@@ -658,8 +658,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 		if (snd_mpu401_uart_new(card, 0,
 					MPU401_HW_MPU401,
 					mpu_port[dev], 0,
-					mpu_irq[dev], IRQF_DISABLED,
-					NULL) < 0)
+					mpu_irq[dev], NULL) < 0)
 			snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
 					mpu_port[dev]);
 	}

sound/isa/sscape.c

@@ -825,8 +825,7 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum,
 	int err;
 
 	err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
-				  MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
-				  &rawmidi);
+				  MPU401_INFO_INTEGRATED, irq, &rawmidi);
 	if (err == 0) {
 		struct snd_mpu401 *mpu = rawmidi->private_data;
 		mpu->open_input = mpu401_open;

sound/isa/wavefront/wavefront.c

@@ -418,7 +418,7 @@ snd_wavefront_probe (struct snd_card *card, int dev)
 		return -EBUSY;
 	}
 	if (request_irq(ics2115_irq[dev], snd_wavefront_ics2115_interrupt,
-			IRQF_DISABLED, "ICS2115", acard)) {
+			0, "ICS2115", acard)) {
 		snd_printk(KERN_ERR "unable to use ICS2115 IRQ %d\n", ics2115_irq[dev]);
 		return -EBUSY;
 	}
@@ -449,8 +449,7 @@ snd_wavefront_probe (struct snd_card *card, int dev)
 	if (cs4232_mpu_port[dev] > 0 && cs4232_mpu_port[dev] != SNDRV_AUTO_PORT) {
 		err = snd_mpu401_uart_new(card, midi_dev, MPU401_HW_CS4232,
 					  cs4232_mpu_port[dev], 0,
-					  cs4232_mpu_irq[dev], IRQF_DISABLED,
-					  NULL);
+					  cs4232_mpu_irq[dev], NULL);
 		if (err < 0) {
 			snd_printk (KERN_ERR "can't allocate CS4232 MPU-401 device\n");
 			return err;

sound/isa/wss/wss_lib.c

@@ -1833,7 +1833,7 @@ int snd_wss_create(struct snd_card *card,
 	}
 	chip->cport = cport;
 	if (!(hwshare & WSS_HWSHARE_IRQ))
-		if (request_irq(irq, snd_wss_interrupt, IRQF_DISABLED,
+		if (request_irq(irq, snd_wss_interrupt, 0,
 				"WSS", (void *) chip)) {
 			snd_printk(KERN_ERR "wss: can't grab IRQ %d\n", irq);
 			snd_wss_free(chip);

sound/mips/Kconfig

@@ -23,12 +23,15 @@ config SND_SGI_HAL2
 
 
 config SND_AU1X00
-	tristate "Au1x00 AC97 Port Driver"
+	tristate "Au1x00 AC97 Port Driver (DEPRECATED)"
 	depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
 	  ALSA Sound driver for the Au1x00's AC97 port.
 
+	  Newer drivers for ASoC are available, please do not use
+	  this driver as it will be removed in the future.
+
 endif	# SND_MIPS
 

sound/mips/au1x00.c

@@ -465,13 +465,13 @@ snd_au1000_pcm_new(struct snd_au1000 *au1000)
 
 	flags = claim_dma_lock();
 	if ((au1000->stream[PLAYBACK]->dma = request_au1000_dma(DMA_ID_AC97C_TX,
-			"AC97 TX", au1000_dma_interrupt, IRQF_DISABLED,
+			"AC97 TX", au1000_dma_interrupt, 0,
 			au1000->stream[PLAYBACK])) < 0) {
 		release_dma_lock(flags);
 		return -EBUSY;
 	}
 	if ((au1000->stream[CAPTURE]->dma = request_au1000_dma(DMA_ID_AC97C_RX,
-			"AC97 RX", au1000_dma_interrupt, IRQF_DISABLED,
+			"AC97 RX", au1000_dma_interrupt, 0,
 			au1000->stream[CAPTURE])) < 0){
 		release_dma_lock(flags);
 		return -EBUSY;