From 695955028a42793fd09c3149727cbb8085ec6905 Mon Sep 17 00:00:00 2001 From: "Dr. David Alan Gilbert" Date: Wed, 25 Dec 2019 02:32:24 +0000 Subject: [PATCH] hwmon: (w83627ehf) Remove code not needed after nct677* removal Now the nct677* are gone, we can clean up some flags that are always the same now and simplify some code. Signed-off-by: Dr. David Alan Gilbert Link: https://lore.kernel.org/r/20191225023225.2785-3-linux@treblig.org Signed-off-by: Guenter Roeck --- drivers/hwmon/w83627ehf.c | 138 +++++++++----------------------------- 1 file changed, 32 insertions(+), 106 deletions(-) diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 47edca0ffe53..e13bec80af0b 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -65,10 +65,6 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -static unsigned short fan_debounce; -module_param(fan_debounce, ushort, 0); -MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); - #define DRVNAME "w83627ehf" /* @@ -309,7 +305,6 @@ static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in) struct w83627ehf_data { int addr; /* IO base of hw monitor block */ const char *name; - enum kinds kind; /* Convenience copy of sio_data->kind */ struct mutex lock; @@ -320,20 +315,10 @@ struct w83627ehf_data { u8 temp_src[NUM_REG_TEMP]; const char * const *temp_label; - const u16 *REG_PWM; - const u16 *REG_TARGET; - const u16 *REG_FAN; - const u16 *REG_FAN_MIN; - const u16 *REG_FAN_START_OUTPUT; - const u16 *REG_FAN_STOP_OUTPUT; - const u16 *REG_FAN_STOP_TIME; const u16 *REG_FAN_MAX_OUTPUT; const u16 *REG_FAN_STEP_OUTPUT; const u16 *scale_in; - unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg); - unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg); - struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -349,7 +334,6 @@ struct w83627ehf_data { u8 fan_div[5]; u8 has_fan; /* some fan inputs can be disabled */ u8 has_fan_min; /* some fans don't have min register */ - bool has_fan_div; u8 temp_type[3]; s8 temp_offset[3]; s16 temp[9]; @@ -527,12 +511,6 @@ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr) } } -static void w83627ehf_write_fan_div_common(struct device *dev, - struct w83627ehf_data *data, int nr) -{ - w83627ehf_write_fan_div(data, nr); -} - static void w83627ehf_update_fan_div(struct w83627ehf_data *data) { int i; @@ -558,12 +536,6 @@ static void w83627ehf_update_fan_div(struct w83627ehf_data *data) } } -static void w83627ehf_update_fan_div_common(struct device *dev, - struct w83627ehf_data *data) -{ - w83627ehf_update_fan_div(data); -} - static void w83627ehf_update_pwm(struct w83627ehf_data *data) { int i; @@ -584,18 +556,12 @@ static void w83627ehf_update_pwm(struct w83627ehf_data *data) ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i]) & 3) + 1; - data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]); + data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]); data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f; } } -static void w83627ehf_update_pwm_common(struct device *dev, - struct w83627ehf_data *data) -{ - w83627ehf_update_pwm(data); -} - static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) { struct w83627ehf_data *data = dev_get_drvdata(dev); @@ -606,7 +572,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ + HZ/2) || !data->valid) { /* Fan clock dividers */ - w83627ehf_update_fan_div_common(dev, data); + w83627ehf_update_fan_div(data); /* Measured voltages and limits */ for (i = 0; i < data->in_num; i++) { @@ -628,39 +594,36 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) if (!(data->has_fan & (1 << i))) continue; - reg = w83627ehf_read_value(data, data->REG_FAN[i]); - data->rpm[i] = data->fan_from_reg(reg, - data->fan_div[i]); + reg = w83627ehf_read_value(data, W83627EHF_REG_FAN[i]); + data->rpm[i] = fan_from_reg8(reg, data->fan_div[i]); if (data->has_fan_min & (1 << i)) data->fan_min[i] = w83627ehf_read_value(data, - data->REG_FAN_MIN[i]); + W83627EHF_REG_FAN_MIN[i]); /* * If we failed to measure the fan speed and clock * divider can be increased, let's try that for next * time */ - if (data->has_fan_div - && reg >= 0xff - && data->fan_div[i] < 0x07) { + if (reg >= 0xff && data->fan_div[i] < 0x07) { dev_dbg(dev, "Increasing fan%d clock divider from %u to %u\n", i + 1, div_from_reg(data->fan_div[i]), div_from_reg(data->fan_div[i] + 1)); data->fan_div[i]++; - w83627ehf_write_fan_div_common(dev, data, i); + w83627ehf_write_fan_div(data, i); /* Preserve min limit if possible */ if ((data->has_fan_min & (1 << i)) && data->fan_min[i] >= 2 && data->fan_min[i] != 255) w83627ehf_write_value(data, - data->REG_FAN_MIN[i], + W83627EHF_REG_FAN_MIN[i], (data->fan_min[i] /= 2)); } } - w83627ehf_update_pwm_common(dev, data); + w83627ehf_update_pwm(data); for (i = 0; i < data->pwm_num; i++) { if (!(data->has_fan & (1 << i))) @@ -668,13 +631,13 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) data->fan_start_output[i] = w83627ehf_read_value(data, - data->REG_FAN_START_OUTPUT[i]); + W83627EHF_REG_FAN_START_OUTPUT[i]); data->fan_stop_output[i] = w83627ehf_read_value(data, - data->REG_FAN_STOP_OUTPUT[i]); + W83627EHF_REG_FAN_STOP_OUTPUT[i]); data->fan_stop_time[i] = w83627ehf_read_value(data, - data->REG_FAN_STOP_TIME[i]); + W83627EHF_REG_FAN_STOP_TIME[i]); if (data->REG_FAN_MAX_OUTPUT && data->REG_FAN_MAX_OUTPUT[i] != 0xff) @@ -690,7 +653,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) data->target_temp[i] = w83627ehf_read_value(data, - data->REG_TARGET[i]) & + W83627EHF_REG_TARGET[i]) & (data->pwm_mode[i] == 1 ? 0x7f : 0xff); } @@ -763,22 +726,6 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel, return -EINVAL; mutex_lock(&data->update_lock); - if (!data->has_fan_div) { - /* - * Only NCT6776F for now, so we know that this is a 13 bit - * register - */ - if (!val) { - val = 0xff1f; - } else { - if (val > 1350000U) - val = 135000U; - val = 1350000U / val; - val = (val & 0x1f) | ((val << 3) & 0xff00); - } - data->fan_min[channel] = val; - goto done; /* Leave fan divider alone */ - } if (!val) { /* No min limit, alarm disabled */ data->fan_min[channel] = 255; @@ -794,7 +741,7 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel, new_div = 7; /* 128 == (1 << 7) */ dev_warn(dev, "fan%u low limit %lu below minimum %u, set to minimum\n", - channel + 1, val, data->fan_from_reg_min(254, 7)); + channel + 1, val, fan_from_reg8(254, 7)); } else if (!reg) { /* * Speed above this value cannot possibly be represented, @@ -804,7 +751,7 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel, new_div = 0; /* 1 == (1 << 0) */ dev_warn(dev, "fan%u low limit %lu above maximum %u, set to maximum\n", - channel + 1, val, data->fan_from_reg_min(1, 0)); + channel + 1, val, fan_from_reg8(1, 0)); } else { /* * Automatically pick the best divider, i.e. the one such @@ -828,12 +775,12 @@ store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel, channel + 1, div_from_reg(data->fan_div[channel]), div_from_reg(new_div)); data->fan_div[channel] = new_div; - w83627ehf_write_fan_div_common(dev, data, channel); + w83627ehf_write_fan_div(data, channel); /* Give the chip time to sample a new speed value */ data->last_updated = jiffies; } -done: - w83627ehf_write_value(data, data->REG_FAN_MIN[channel], + + w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[channel], data->fan_min[channel]); mutex_unlock(&data->update_lock); @@ -895,7 +842,7 @@ store_pwm(struct device *dev, struct w83627ehf_data *data, int channel, mutex_lock(&data->update_lock); data->pwm[channel] = val; - w83627ehf_write_value(data, data->REG_PWM[channel], val); + w83627ehf_write_value(data, W83627EHF_REG_PWM[channel], val); mutex_unlock(&data->update_lock); return 0; } @@ -954,7 +901,7 @@ store_target_temp(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->target_temp[nr] = val; - w83627ehf_write_value(data, data->REG_TARGET[nr], val); + w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val); mutex_unlock(&data->update_lock); return count; } @@ -1035,15 +982,15 @@ store_##reg(struct device *dev, struct device_attribute *attr, \ val = clamp_val(val, 1, 255); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ - w83627ehf_write_value(data, data->REG_##REG[nr], val); \ + w83627ehf_write_value(data, REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } -fan_functions(fan_start_output, FAN_START_OUTPUT) -fan_functions(fan_stop_output, FAN_STOP_OUTPUT) -fan_functions(fan_max_output, FAN_MAX_OUTPUT) -fan_functions(fan_step_output, FAN_STEP_OUTPUT) +fan_functions(fan_start_output, W83627EHF_REG_FAN_START_OUTPUT) +fan_functions(fan_stop_output, W83627EHF_REG_FAN_STOP_OUTPUT) +fan_functions(fan_max_output, data->REG_FAN_MAX_OUTPUT) +fan_functions(fan_step_output, data->REG_FAN_STEP_OUTPUT) #define fan_time_functions(reg, REG) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ @@ -1074,12 +1021,12 @@ store_##reg(struct device *dev, struct device_attribute *attr, \ val = step_time_to_reg(val, data->pwm_mode[nr]); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ - w83627ehf_write_value(data, data->REG_##REG[nr], val); \ + w83627ehf_write_value(data, REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } \ -fan_time_functions(fan_stop_time, FAN_STOP_TIME) +fan_time_functions(fan_stop_time, W83627EHF_REG_FAN_STOP_TIME) static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time, store_fan_stop_time, 3); @@ -1555,8 +1502,8 @@ w83627ehf_do_read_fan(struct w83627ehf_data *data, u32 attr, *val = data->rpm[channel]; return 0; case hwmon_fan_min: - *val = data->fan_from_reg_min(data->fan_min[channel], - data->fan_div[channel]); + *val = fan_from_reg8(data->fan_min[channel], + data->fan_div[channel]); return 0; case hwmon_fan_div: *val = div_from_reg(data->fan_div[channel]); @@ -1781,7 +1728,6 @@ static int w83627ehf_probe(struct platform_device *pdev) mutex_init(&data->lock); mutex_init(&data->update_lock); data->name = w83627ehf_device_names[sio_data->kind]; - data->kind = sio_data->kind; data->bank = 0xff; /* Force initial bank selection */ platform_set_drvdata(pdev, data); @@ -1916,31 +1862,11 @@ static int w83627ehf_probe(struct platform_device *pdev) } if (sio_data->kind == w83667hg_b) { - data->has_fan_div = true; - data->fan_from_reg = fan_from_reg8; - data->fan_from_reg_min = fan_from_reg8; - data->REG_PWM = W83627EHF_REG_PWM; - data->REG_TARGET = W83627EHF_REG_TARGET; - data->REG_FAN = W83627EHF_REG_FAN; - data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN; - data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT; - data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT; - data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME; data->REG_FAN_MAX_OUTPUT = W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B; data->REG_FAN_STEP_OUTPUT = W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B; } else { - data->has_fan_div = true; - data->fan_from_reg = fan_from_reg8; - data->fan_from_reg_min = fan_from_reg8; - data->REG_PWM = W83627EHF_REG_PWM; - data->REG_TARGET = W83627EHF_REG_TARGET; - data->REG_FAN = W83627EHF_REG_FAN; - data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN; - data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT; - data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT; - data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME; data->REG_FAN_MAX_OUTPUT = W83627EHF_REG_FAN_MAX_OUTPUT_COMMON; data->REG_FAN_STEP_OUTPUT = @@ -2017,10 +1943,10 @@ static int w83627ehf_probe(struct platform_device *pdev) superio_exit(sio_data->sioreg); /* Read fan clock dividers immediately */ - w83627ehf_update_fan_div_common(dev, data); + w83627ehf_update_fan_div(data); /* Read pwm data to save original values */ - w83627ehf_update_pwm_common(dev, data); + w83627ehf_update_pwm(data); for (i = 0; i < data->pwm_num; i++) data->pwm_enable_orig[i] = data->pwm_enable[i]; @@ -2082,7 +2008,7 @@ static int w83627ehf_resume(struct device *dev) if (!(data->has_fan_min & (1 << i))) continue; - w83627ehf_write_value(data, data->REG_FAN_MIN[i], + w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[i], data->fan_min[i]); }