redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

manual merge for pm-hwmod-uart due to conflicts

hifive-unleashed-5.1
Kevin Hilman 2010-10-01 13:24:10 -07:00
parent 963bfb0939 257f23d87f
commit 69758ab7a1
22 changed files with 2711 additions and 300 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
arch/arm/mach-omap2/Kconfig
View File

@ -11,9 +11,8 @@ config ARCH_OMAP2PLUS_TYPICAL
select PM_RUNTIME
select VFP
select NEON if ARCH_OMAP3 || ARCH_OMAP4
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select SERIAL_OMAP
select SERIAL_OMAP_CONSOLE
select I2C
select I2C_OMAP
select MFD
@ -222,12 +221,18 @@ config MACH_OMAP_ZOOM2
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBP
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35 module"

1
arch/arm/mach-omap2/board-3630sdp.c
View File

@ -208,7 +208,6 @@ static struct flash_partitions sdp_flash_partitions[] = {
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_serial_init();
zoom_peripherals_init();
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp);

1
arch/arm/mach-omap2/board-zoom-peripherals.c
View File

@ -283,4 +283,5 @@ void __init zoom_peripherals_init(void)
omap_i2c_init();
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
omap_serial_init();
}

22
arch/arm/mach-omap2/clock3xxx_data.c
View File

@ -2465,6 +2465,16 @@ static struct clk uart3_fck = {
.recalc = &followparent_recalc,
};
static struct clk uart4_fck = {
.name = "uart4_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &per_48m_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3630_EN_UART4_SHIFT,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt2_fck = {
.name = "gpt2_fck",
.ops = &clkops_omap2_dflt_wait,
@ -2715,6 +2725,16 @@ static struct clk uart3_ick = {
.recalc = &followparent_recalc,
};
static struct clk uart4_ick = {
.name = "uart4_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3630_EN_UART4_SHIFT,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt9_ick = {
.name = "gpt9_ick",
.ops = &clkops_omap2_dflt_wait,
@ -3349,6 +3369,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX),
CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX),
CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX),
CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX),
CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX),
@ -3372,6 +3393,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX),
CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX),
CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX),
CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX),
CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX),
CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX),
CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX),

2
arch/arm/mach-omap2/cm-regbits-34xx.h
View File

@ -649,6 +649,8 @@
#define OMAP3430_ST_MCBSP2_MASK (1 << 0)
/* CM_AUTOIDLE_PER */
#define OMAP3630_AUTO_UART4_MASK (1 << 18)
#define OMAP3630_AUTO_UART4_SHIFT 18
#define OMAP3430_AUTO_GPIO6_MASK (1 << 17)
#define OMAP3430_AUTO_GPIO6_SHIFT 17
#define OMAP3430_AUTO_GPIO5_MASK (1 << 16)

193
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View File

@ -15,6 +15,7 @@
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include "omap_hwmod_common_data.h"
@ -73,6 +74,9 @@ static struct omap_hwmod omap2420_l3_main_hwmod = {
};
static struct omap_hwmod omap2420_l4_wkup_hwmod;
static struct omap_hwmod omap2420_uart1_hwmod;
static struct omap_hwmod omap2420_uart2_hwmod;
static struct omap_hwmod omap2420_uart3_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
@ -81,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART1 interface */
static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = {
{
.pa_start = OMAP2_UART1_BASE,
.pa_end = OMAP2_UART1_BASE + SZ_8K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_uart1_hwmod,
.clk = "uart1_ick",
.addr = omap2420_uart1_addr_space,
.addr_cnt = ARRAY_SIZE(omap2420_uart1_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART2 interface */
static struct omap_hwmod_addr_space omap2420_uart2_addr_space[] = {
{
.pa_start = OMAP2_UART2_BASE,
.pa_end = OMAP2_UART2_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_uart2_hwmod,
.clk = "uart2_ick",
.addr = omap2420_uart2_addr_space,
.addr_cnt = ARRAY_SIZE(omap2420_uart2_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART3 interface */
static struct omap_hwmod_addr_space omap2420_uart3_addr_space[] = {
{
.pa_start = OMAP2_UART3_BASE,
.pa_end = OMAP2_UART3_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_uart3_hwmod,
.clk = "uart3_ick",
.addr = omap2420_uart3_addr_space,
.addr_cnt = ARRAY_SIZE(omap2420_uart3_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
&omap2420_l3_main__l4_core,
@ -89,6 +147,9 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
&omap2420_l4_core__l4_wkup,
&omap2_l4_core__uart1,
&omap2_l4_core__uart2,
&omap2_l4_core__uart3,
};
/* L4 CORE */
@ -228,6 +289,135 @@ static struct omap_hwmod omap2420_wd_timer2_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART */
static struct omap_hwmod_class_sysconfig uart_sysc = {
.rev_offs = 0x50,
.sysc_offs = 0x54,
.syss_offs = 0x58,
.sysc_flags = (SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class uart_class = {
.name = "uart",
.sysc = &uart_sysc,
};
/* UART1 */
static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
{ .irq = INT_24XX_UART1_IRQ, },
};
static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, },
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, },
};
static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = {
&omap2_l4_core__uart1,
};
static struct omap_hwmod omap2420_uart1_hwmod = {
.name = "uart1",
.mpu_irqs = uart1_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs),
.sdma_reqs = uart1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs),
.main_clk = "uart1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_UART1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
},
},
.slaves = omap2420_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART2 */
static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
{ .irq = INT_24XX_UART2_IRQ, },
};
static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, },
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, },
};
static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = {
&omap2_l4_core__uart2,
};
static struct omap_hwmod omap2420_uart2_hwmod = {
.name = "uart2",
.mpu_irqs = uart2_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs),
.sdma_reqs = uart2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs),
.main_clk = "uart2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_UART2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
},
},
.slaves = omap2420_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART3 */
static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
{ .irq = INT_24XX_UART3_IRQ, },
};
static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, },
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, },
};
static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = {
&omap2_l4_core__uart3,
};
static struct omap_hwmod omap2420_uart3_hwmod = {
.name = "uart3",
.mpu_irqs = uart3_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs),
.sdma_reqs = uart3_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs),
.main_clk = "uart3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 2,
.module_bit = OMAP24XX_EN_UART3_SHIFT,
.idlest_reg_id = 2,
.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
},
},
.slaves = omap2420_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_l3_main_hwmod,
&omap2420_l4_core_hwmod,
@ -235,6 +425,9 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_mpu_hwmod,
&omap2420_iva_hwmod,
&omap2420_wd_timer2_hwmod,
&omap2420_uart1_hwmod,
&omap2420_uart2_hwmod,
&omap2420_uart3_hwmod,
NULL,
};

193
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View File

@ -15,6 +15,7 @@
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include "omap_hwmod_common_data.h"
@ -73,6 +74,9 @@ static struct omap_hwmod omap2430_l3_main_hwmod = {
};
static struct omap_hwmod omap2430_l4_wkup_hwmod;
static struct omap_hwmod omap2430_uart1_hwmod;
static struct omap_hwmod omap2430_uart2_hwmod;
static struct omap_hwmod omap2430_uart3_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
@ -81,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART1 interface */
static struct omap_hwmod_addr_space omap2430_uart1_addr_space[] = {
{
.pa_start = OMAP2_UART1_BASE,
.pa_end = OMAP2_UART1_BASE + SZ_8K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_uart1_hwmod,
.clk = "uart1_ick",
.addr = omap2430_uart1_addr_space,
.addr_cnt = ARRAY_SIZE(omap2430_uart1_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART2 interface */
static struct omap_hwmod_addr_space omap2430_uart2_addr_space[] = {
{
.pa_start = OMAP2_UART2_BASE,
.pa_end = OMAP2_UART2_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_uart2_hwmod,
.clk = "uart2_ick",
.addr = omap2430_uart2_addr_space,
.addr_cnt = ARRAY_SIZE(omap2430_uart2_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART3 interface */
static struct omap_hwmod_addr_space omap2430_uart3_addr_space[] = {
{
.pa_start = OMAP2_UART3_BASE,
.pa_end = OMAP2_UART3_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_uart3_hwmod,
.clk = "uart3_ick",
.addr = omap2430_uart3_addr_space,
.addr_cnt = ARRAY_SIZE(omap2430_uart3_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
&omap2430_l3_main__l4_core,
@ -106,6 +164,9 @@ static struct omap_hwmod omap2430_l4_core_hwmod = {
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
&omap2430_l4_core__l4_wkup,
&omap2_l4_core__uart1,
&omap2_l4_core__uart2,
&omap2_l4_core__uart3,
};
/* Master interfaces on the L4_WKUP interconnect */
@ -228,6 +289,135 @@ static struct omap_hwmod omap2430_wd_timer2_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART */
static struct omap_hwmod_class_sysconfig uart_sysc = {
.rev_offs = 0x50,
.sysc_offs = 0x54,
.syss_offs = 0x58,
.sysc_flags = (SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class uart_class = {
.name = "uart",
.sysc = &uart_sysc,
};
/* UART1 */
static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
{ .irq = INT_24XX_UART1_IRQ, },
};
static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, },
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, },
};
static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = {
&omap2_l4_core__uart1,
};
static struct omap_hwmod omap2430_uart1_hwmod = {
.name = "uart1",
.mpu_irqs = uart1_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs),
.sdma_reqs = uart1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs),
.main_clk = "uart1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_UART1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
},
},
.slaves = omap2430_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART2 */
static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
{ .irq = INT_24XX_UART2_IRQ, },
};
static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, },
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, },
};
static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = {
&omap2_l4_core__uart2,
};
static struct omap_hwmod omap2430_uart2_hwmod = {
.name = "uart2",
.mpu_irqs = uart2_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs),
.sdma_reqs = uart2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs),
.main_clk = "uart2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_UART2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
},
},
.slaves = omap2430_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART3 */
static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
{ .irq = INT_24XX_UART3_IRQ, },
};
static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, },
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, },
};
static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = {
&omap2_l4_core__uart3,
};
static struct omap_hwmod omap2430_uart3_hwmod = {
.name = "uart3",
.mpu_irqs = uart3_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs),
.sdma_reqs = uart3_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs),
.main_clk = "uart3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 2,
.module_bit = OMAP24XX_EN_UART3_SHIFT,
.idlest_reg_id = 2,
.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
},
},
.slaves = omap2430_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_l3_main_hwmod,
&omap2430_l4_core_hwmod,
@ -235,6 +425,9 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_mpu_hwmod,
&omap2430_iva_hwmod,
&omap2430_wd_timer2_hwmod,
&omap2430_uart1_hwmod,
&omap2430_uart2_hwmod,
&omap2430_uart3_hwmod,
NULL,
};

253
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -17,6 +17,7 @@
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include "omap_hwmod_common_data.h"
@ -84,6 +85,10 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod = {
};
static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
static struct omap_hwmod omap3xxx_uart1_hwmod;
static struct omap_hwmod omap3xxx_uart2_hwmod;
static struct omap_hwmod omap3xxx_uart3_hwmod;
static struct omap_hwmod omap3xxx_uart4_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
@ -92,6 +97,78 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART1 interface */
static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
{
.pa_start = OMAP3_UART1_BASE,
.pa_end = OMAP3_UART1_BASE + SZ_8K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_uart1_hwmod,
.clk = "uart1_ick",
.addr = omap3xxx_uart1_addr_space,
.addr_cnt = ARRAY_SIZE(omap3xxx_uart1_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART2 interface */
static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
{
.pa_start = OMAP3_UART2_BASE,
.pa_end = OMAP3_UART2_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_uart2_hwmod,
.clk = "uart2_ick",
.addr = omap3xxx_uart2_addr_space,
.addr_cnt = ARRAY_SIZE(omap3xxx_uart2_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART3 interface */
static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
{
.pa_start = OMAP3_UART3_BASE,
.pa_end = OMAP3_UART3_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_uart3_hwmod,
.clk = "uart3_ick",
.addr = omap3xxx_uart3_addr_space,
.addr_cnt = ARRAY_SIZE(omap3xxx_uart3_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART4 interface */
static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = {
{
.pa_start = OMAP3_UART4_BASE,
.pa_end = OMAP3_UART4_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_uart4_hwmod,
.clk = "uart4_ick",
.addr = omap3xxx_uart4_addr_space,
.addr_cnt = ARRAY_SIZE(omap3xxx_uart4_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
&omap3xxx_l3_main__l4_core,
@ -100,6 +177,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
&omap3xxx_l4_core__l4_wkup,
&omap3_l4_core__uart1,
&omap3_l4_core__uart2,
};
/* L4 CORE */
@ -121,6 +200,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
/* Master interfaces on the L4_PER interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = {
&omap3_l4_per__uart3,
&omap3_l4_per__uart4,
};
/* L4 PER */
@ -262,6 +343,172 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART common */
static struct omap_hwmod_class_sysconfig uart_sysc = {
.rev_offs = 0x50,
.sysc_offs = 0x54,
.syss_offs = 0x58,
.sysc_flags = (SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class uart_class = {
.name = "uart",
.sysc = &uart_sysc,
};
/* UART1 */
static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
{ .irq = INT_24XX_UART1_IRQ, },
};
static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, },
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, },
};
static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = {
&omap3_l4_core__uart1,
};
static struct omap_hwmod omap3xxx_uart1_hwmod = {
.name = "uart1",
.mpu_irqs = uart1_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs),
.sdma_reqs = uart1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs),
.main_clk = "uart1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_UART1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
},
},
.slaves = omap3xxx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART2 */
static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
{ .irq = INT_24XX_UART2_IRQ, },
};
static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, },
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, },
};
static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = {
&omap3_l4_core__uart2,
};
static struct omap_hwmod omap3xxx_uart2_hwmod = {
.name = "uart2",
.mpu_irqs = uart2_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs),
.sdma_reqs = uart2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs),
.main_clk = "uart2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_UART2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
},
},
.slaves = omap3xxx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART3 */
static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
{ .irq = INT_24XX_UART3_IRQ, },
};
static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, },
{ .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, },
};
static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = {
&omap3_l4_per__uart3,
};
static struct omap_hwmod omap3xxx_uart3_hwmod = {
.name = "uart3",
.mpu_irqs = uart3_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs),
.sdma_reqs = uart3_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs),
.main_clk = "uart3_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_UART3_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
},
},
.slaves = omap3xxx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART4 */
static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
{ .irq = INT_36XX_UART4_IRQ, },
};
static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
{ .name = "rx", .dma_req = OMAP36XX_DMA_UART4_RX, },
{ .name = "tx", .dma_req = OMAP36XX_DMA_UART4_TX, },
};
static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = {
&omap3_l4_per__uart4,
};
static struct omap_hwmod omap3xxx_uart4_hwmod = {
.name = "uart4",
.mpu_irqs = uart4_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(uart4_mpu_irqs),
.sdma_reqs = uart4_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(uart4_sdma_reqs),
.main_clk = "uart4_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3630_EN_UART4_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
},
},
.slaves = omap3xxx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves),
.class = &uart_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_main_hwmod,
&omap3xxx_l4_core_hwmod,
@ -270,6 +517,10 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_mpu_hwmod,
&omap3xxx_iva_hwmod,
&omap3xxx_wd_timer2_hwmod,
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
&omap3xxx_uart4_hwmod,
NULL,
};
@ -277,5 +528,3 @@ int __init omap3xxx_hwmod_init(void)
{
return omap_hwmod_init(omap3xxx_hwmods);
}

235
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -468,6 +468,21 @@ static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
.sysc_fields = &omap_hwmod_sysc_type1,
};
/*
* 'uart' class
* universal asynchronous receiver/transmitter (uart)
*/
static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
.rev_offs = 0x0050,
.sysc_offs = 0x0054,
.syss_offs = 0x0058,
.sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
.name = "wd_timer",
.sysc = &omap44xx_wd_timer_sysc,
@ -487,6 +502,82 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
},
};
static struct omap_hwmod_class omap44xx_uart_hwmod_class = {
.name = "uart",
.sysc = &omap44xx_uart_sysc,
};
/* uart1 */
static struct omap_hwmod omap44xx_uart1_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = {
{ .irq = 72 + OMAP44XX_IRQ_GIC_START },
};
static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = {
{ .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START },
{ .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START },
};
static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
{
.pa_start = 0x4806a000,
.pa_end = 0x4806a0ff,
.flags = ADDR_TYPE_RT
},
};
/* l4_per -> uart1 */
static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_uart1_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_uart1_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_uart1_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* uart1 slave ports */
static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
&omap44xx_l4_per__uart1,
};
static struct omap_hwmod omap44xx_uart1_hwmod = {
.name = "uart1",
.class = &omap44xx_uart_hwmod_class,
.mpu_irqs = omap44xx_uart1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart1_irqs),
.sdma_reqs = omap44xx_uart1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart1_sdma_reqs),
.main_clk = "uart1_fck",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL,
},
},
.slaves = omap44xx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart2 */
static struct omap_hwmod omap44xx_uart2_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = {
{ .irq = 73 + OMAP44XX_IRQ_GIC_START },
};
static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = {
{ .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START },
{ .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START },
};
static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
{
.pa_start = 0x4806c000,
.pa_end = 0x4806c0ff,
.flags = ADDR_TYPE_RT
},
};
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
.master = &omap44xx_l4_wkup_hwmod,
@ -532,6 +623,58 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
},
};
/* l4_per -> uart2 */
static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_uart2_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_uart2_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_uart2_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* uart2 slave ports */
static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
&omap44xx_l4_per__uart2,
};
static struct omap_hwmod omap44xx_uart2_hwmod = {
.name = "uart2",
.class = &omap44xx_uart_hwmod_class,
.mpu_irqs = omap44xx_uart2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart2_irqs),
.sdma_reqs = omap44xx_uart2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart2_sdma_reqs),
.main_clk = "uart2_fck",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL,
},
},
.slaves = omap44xx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart3 */
static struct omap_hwmod omap44xx_uart3_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = {
{ .irq = 74 + OMAP44XX_IRQ_GIC_START },
};
static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = {
{ .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START },
{ .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START },
};
static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
{
.pa_start = 0x48020000,
.pa_end = 0x480200ff,
.flags = ADDR_TYPE_RT
},
};
/* l4_abe -> wd_timer3 */
static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
.master = &omap44xx_l4_abe_hwmod,
@ -551,6 +694,59 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
},
};
/* l4_per -> uart3 */
static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_uart3_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_uart3_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_uart3_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* uart3 slave ports */
static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
&omap44xx_l4_per__uart3,
};
static struct omap_hwmod omap44xx_uart3_hwmod = {
.name = "uart3",
.class = &omap44xx_uart_hwmod_class,
.flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
.mpu_irqs = omap44xx_uart3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart3_irqs),
.sdma_reqs = omap44xx_uart3_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart3_sdma_reqs),
.main_clk = "uart3_fck",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL,
},
},
.slaves = omap44xx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart4 */
static struct omap_hwmod omap44xx_uart4_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = {
{ .irq = 70 + OMAP44XX_IRQ_GIC_START },
};
static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = {
{ .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START },
{ .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START },
};
static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
{
.pa_start = 0x4806e000,
.pa_end = 0x4806e0ff,
.flags = ADDR_TYPE_RT
},
};
static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_wd_timer3_hwmod,
@ -582,6 +778,39 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_per -> uart4 */
static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_uart4_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_uart4_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_uart4_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* uart4 slave ports */
static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
&omap44xx_l4_per__uart4,
};
static struct omap_hwmod omap44xx_uart4_hwmod = {
.name = "uart4",
.class = &omap44xx_uart_hwmod_class,
.mpu_irqs = omap44xx_uart4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart4_irqs),
.sdma_reqs = omap44xx_uart4_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart4_sdma_reqs),
.main_clk = "uart4_fck",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL,
},
},
.slaves = omap44xx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* dmm class */
&omap44xx_dmm_hwmod,
@ -605,6 +834,12 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* wd_timer class */
&omap44xx_wd_timer2_hwmod,
&omap44xx_wd_timer3_hwmod,
/* uart class */
&omap44xx_uart1_hwmod,
&omap44xx_uart2_hwmod,
&omap44xx_uart3_hwmod,
&omap44xx_uart4_hwmod,
NULL,
};

17
arch/arm/mach-omap2/pm34xx.c
View File

@ -388,6 +388,7 @@ void omap_sram_idle(void)
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_next_state);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
@ -459,6 +460,7 @@ void omap_sram_idle(void)
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
omap_uart_resume_idle(2);
omap_uart_resume_idle(3);
}
/* Disable IO-PAD and IO-CHAIN wakeup */
@ -676,6 +678,14 @@ static void __init omap3_d2d_idle(void)
static void __init prcm_setup_regs(void)
{
u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
OMAP3630_AUTO_UART4_MASK : 0;
u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
OMAP3630_EN_UART4_MASK : 0;
u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
OMAP3630_GRPSEL_UART4_MASK : 0;
/* XXX Reset all wkdeps. This should be done when initializing
* powerdomains */
prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
@ -762,6 +772,7 @@ static void __init prcm_setup_regs(void)
CM_AUTOIDLE);
cm_write_mod_reg(
omap3630_auto_uart4_mask |
OMAP3430_AUTO_GPIO6_MASK |
OMAP3430_AUTO_GPIO5_MASK |
OMAP3430_AUTO_GPIO4_MASK |
@ -838,14 +849,16 @@ static void __init prcm_setup_regs(void)
OMAP3430_DSS_MOD, PM_WKEN);
/* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
prm_write_mod_reg(omap3630_en_uart4_mask |
OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
OMAP3430_EN_MCBSP4_MASK,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
prm_write_mod_reg(omap3630_grpsel_uart4_mask |
OMAP3430_GRPSEL_GPIO2_MASK |
OMAP3430_GRPSEL_GPIO3_MASK |
OMAP3430_GRPSEL_GPIO4_MASK |
OMAP3430_GRPSEL_GPIO5_MASK |

5
arch/arm/mach-omap2/prcm-common.h
View File

@ -382,6 +382,9 @@
#define OMAP3430_EN_MPU_SHIFT 1
/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
#define OMAP3630_EN_UART4_MASK (1 << 18)
#define OMAP3630_EN_UART4_SHIFT 18
#define OMAP3430_EN_GPIO6_MASK (1 << 17)
#define OMAP3430_EN_GPIO6_SHIFT 17
#define OMAP3430_EN_GPIO5_MASK (1 << 16)
@ -422,6 +425,8 @@
#define OMAP3430_EN_MCBSP2_SHIFT 0
/* CM_IDLEST_PER, PM_WKST_PER shared bits */
#define OMAP3630_ST_UART4_SHIFT 18
#define OMAP3630_ST_UART4_MASK (1 << 18)
#define OMAP3430_ST_GPIO6_SHIFT 17
#define OMAP3430_ST_GPIO6_MASK (1 << 17)
#define OMAP3430_ST_GPIO5_SHIFT 16

1
arch/arm/mach-omap2/prm-regbits-34xx.h
View File

@ -122,6 +122,7 @@
#define OMAP3430_MEMRETSTATE_MASK (1 << 8)
/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
#define OMAP3630_GRPSEL_UART4_MASK (1 << 18)
#define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17)
#define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16)
#define OMAP3430_GRPSEL_GPIO4_MASK (1 << 15)

563
arch/arm/mach-omap2/serial.c
View File

@ -19,19 +19,30 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/serial_8250.h>
#include <linux/pm_runtime.h>
#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
#endif
#include <plat/common.h>
#include <plat/board.h>
#include <plat/clock.h>
#include <plat/control.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include "prm.h"
#include "pm.h"
#include "cm.h"
#include "prm-regbits-34xx.h"
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
@ -48,6 +59,8 @@
*/
#define DEFAULT_TIMEOUT 0
#define MAX_UART_HWMOD_NAME_LEN 16
struct omap_uart_state {
int num;
int can_sleep;
@ -58,14 +71,21 @@ struct omap_uart_state {
void __iomem *wk_en;
u32 wk_mask;
u32 padconf;
u32 dma_enabled;
struct clk *ick;
struct clk *fck;
int clocked;
struct plat_serial8250_port *p;
int irq;
int regshift;
int irqflags;
void __iomem *membase;
resource_size_t mapbase;
struct list_head node;
struct platform_device pdev;
struct omap_hwmod *oh;
struct platform_device *pdev;
u32 errata;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
@ -83,75 +103,47 @@ struct omap_uart_state {
};
static LIST_HEAD(uart_list);
static u8 num_uarts;
static struct plat_serial8250_port serial_platform_data0[] = {
{
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
static struct plat_serial8250_port serial_platform_data1[] = {
{
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
static struct plat_serial8250_port serial_platform_data2[] = {
{
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
static struct plat_serial8250_port serial_platform_data3[] = {
{
.irq = 70,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
/*
* Since these idle/enable hooks are used in the idle path itself
* which has interrupts disabled, use the non-locking versions of
* the hwmod enable/disable functions.
*/
static int uart_idle_hwmod(struct omap_device *od)
{
serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
_omap_hwmod_idle(od->hwmods[0]);
return 0;
}
static int uart_enable_hwmod(struct omap_device *od)
{
_omap_hwmod_enable(od->hwmods[0]);
return 0;
}
static struct omap_device_pm_latency omap_uart_latency[] = {
{
.deactivate_func = uart_idle_hwmod,
.activate_func = uart_enable_hwmod,
.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
},
};
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
}
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
static inline unsigned int serial_read_reg(struct omap_uart_state *uart,
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
offset <<= uart->regshift;
return (unsigned int)__raw_readb(uart->membase + offset);
}
static inline void __serial_write_reg(struct uart_port *up, int offset,
@ -161,11 +153,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset,
__raw_writeb(value, up->membase + offset);
}
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
int value)
{
offset <<= p->regshift;
__raw_writeb(value, p->membase + offset);
offset <<= uart->regshift;
__raw_writeb(value, uart->membase + offset);
}
/*
@ -173,14 +165,12 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
struct plat_serial8250_port *p = uart->p;
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
serial_write_reg(uart, UART_OMAP_SCR, 0x08);
serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
}
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@ -197,24 +187,23 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
u8 fcr_val)
{
struct plat_serial8250_port *p = uart->p;
u8 timeout = 255;
serial_write_reg(p, UART_OMAP_MDR1, mdr1_val);
serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val);
udelay(2);
serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_RCVR);
/*
* Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
* TX_FIFO_E bit is 1.
*/
while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) &
while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) &
(UART_LSR_THRE | UART_LSR_DR))) {
timeout--;
if (!timeout) {
/* Should *never* happen. we warn and carry on */
dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n",
serial_read_reg(p, UART_LSR));
dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n",
serial_read_reg(uart, UART_LSR));
break;
}
udelay(1);
@ -224,23 +213,22 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
static void omap_uart_save_context(struct omap_uart_state *uart)
{
u16 lcr = 0;
struct plat_serial8250_port *p = uart->p;
if (!enable_off_mode)
return;
lcr = serial_read_reg(p, UART_LCR);
serial_write_reg(p, UART_LCR, 0xBF);
uart->dll = serial_read_reg(p, UART_DLL);
uart->dlh = serial_read_reg(p, UART_DLM);
serial_write_reg(p, UART_LCR, lcr);
uart->ier = serial_read_reg(p, UART_IER);
uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
uart->scr = serial_read_reg(p, UART_OMAP_SCR);
uart->wer = serial_read_reg(p, UART_OMAP_WER);
serial_write_reg(p, UART_LCR, 0x80);
uart->mcr = serial_read_reg(p, UART_MCR);
serial_write_reg(p, UART_LCR, lcr);
lcr = serial_read_reg(uart, UART_LCR);
serial_write_reg(uart, UART_LCR, 0xBF);
uart->dll = serial_read_reg(uart, UART_DLL);
uart->dlh = serial_read_reg(uart, UART_DLM);
serial_write_reg(uart, UART_LCR, lcr);
uart->ier = serial_read_reg(uart, UART_IER);
uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
uart->wer = serial_read_reg(uart, UART_OMAP_WER);
serial_write_reg(uart, UART_LCR, 0x80);
uart->mcr = serial_read_reg(uart, UART_MCR);
serial_write_reg(uart, UART_LCR, lcr);
uart->context_valid = 1;
}
@ -248,7 +236,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
static void omap_uart_restore_context(struct omap_uart_state *uart)
{
u16 efr = 0;
struct plat_serial8250_port *p = uart->p;
if (!enable_off_mode)
return;
@ -261,29 +248,30 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
else
serial_write_reg(p, UART_OMAP_MDR1, 0x7);
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
efr = serial_read_reg(p, UART_EFR);
serial_write_reg(p, UART_EFR, UART_EFR_ECB);
serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(p, UART_IER, 0x0);
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(p, UART_DLL, uart->dll);
serial_write_reg(p, UART_DLM, uart->dlh);
serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(p, UART_IER, uart->ier);
serial_write_reg(p, UART_LCR, 0x80);
serial_write_reg(p, UART_MCR, uart->mcr);
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(p, UART_EFR, efr);
serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
serial_write_reg(p, UART_OMAP_SCR, uart->scr);
serial_write_reg(p, UART_OMAP_WER, uart->wer);
serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
efr = serial_read_reg(uart, UART_EFR);
serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(uart, UART_IER, 0x0);
serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(uart, UART_DLL, uart->dll);
serial_write_reg(uart, UART_DLM, uart->dlh);
serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(uart, UART_IER, uart->ier);
serial_write_reg(uart, UART_LCR, 0x80);
serial_write_reg(uart, UART_MCR, uart->mcr);
serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(uart, UART_EFR, efr);
serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
serial_write_reg(uart, UART_OMAP_WER, uart->wer);
serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
else
serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
/* UART 16x mode */
serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
}
#else
static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@ -295,8 +283,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
if (uart->clocked)
return;
clk_enable(uart->ick);
clk_enable(uart->fck);
omap_device_enable(uart->pdev);
uart->clocked = 1;
omap_uart_restore_context(uart);
}
@ -310,8 +297,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
omap_uart_save_context(uart);
uart->clocked = 0;
clk_disable(uart->ick);
clk_disable(uart->fck);
omap_device_idle(uart->pdev);
}
static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
@ -349,18 +335,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
}
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
int enable)
int enable)
{
struct plat_serial8250_port *p = uart->p;
u16 sysc;
u8 idlemode;
sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
if (enable)
sysc |= 0x2 << 3;
else
sysc |= 0x1 << 3;
if (enable) {
/**
* Errata 2.15: [UART]:Cannot Acknowledge Idle Requests
* in Smartidle Mode When Configured for DMA Operations.
*/
if (uart->dma_enabled)
idlemode = HWMOD_IDLEMODE_FORCE;
else
idlemode = HWMOD_IDLEMODE_SMART;
} else {
idlemode = HWMOD_IDLEMODE_NO;
}
serial_write_reg(p, UART_OMAP_SYSC, sysc);
omap_hwmod_set_slave_idlemode(uart->oh, idlemode);
}
static void omap_uart_block_sleep(struct omap_uart_state *uart)
@ -377,7 +369,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
static void omap_uart_allow_sleep(struct omap_uart_state *uart)
{
if (device_may_wakeup(&uart->pdev.dev))
if (device_may_wakeup(&uart->pdev->dev))
omap_uart_enable_wakeup(uart);
else
omap_uart_disable_wakeup(uart);
@ -472,6 +464,7 @@ int omap_uart_can_sleep(void)
* UART will not idle or sleep for its timeout period.
*
**/
/* static int first_interrupt; */
static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
{
struct omap_uart_state *uart = dev_id;
@ -483,7 +476,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
static void omap_uart_idle_init(struct omap_uart_state *uart)
{
struct plat_serial8250_port *p = uart->p;
int ret;
uart->can_sleep = 0;
@ -495,7 +487,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
omap_uart_smart_idle_enable(uart, 0);
if (cpu_is_omap34xx()) {
u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
u32 wk_mask = 0;
u32 padconf = 0;
@ -514,6 +506,10 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
wk_mask = OMAP3430_ST_UART3_MASK;
padconf = 0x19e;
break;
case 3:
wk_mask = OMAP3630_ST_UART4_MASK;
padconf = 0x0d2;
break;
}
uart->wk_mask = wk_mask;
uart->padconf = padconf;
@ -546,9 +542,9 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
uart->padconf = 0;
}
p->irqflags |= IRQF_SHARED;
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
"serial idle", (void *)uart);
uart->irqflags |= IRQF_SHARED;
ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
IRQF_SHARED, "serial idle", (void *)uart);
WARN_ON(ret);
}
@ -558,11 +554,17 @@ void omap_uart_enable_irqs(int enable)
struct omap_uart_state *uart;
list_for_each_entry(uart, &uart_list, node) {
if (enable)
ret = request_irq(uart->p->irq, omap_uart_interrupt,
IRQF_SHARED, "serial idle", (void *)uart);
else
free_irq(uart->p->irq, (void *)uart);
if (enable) {
pm_runtime_put_sync(&uart->pdev->dev);
ret = request_threaded_irq(uart->irq, NULL,
omap_uart_interrupt,
IRQF_SHARED,
"serial idle",
(void *)uart);
} else {
pm_runtime_get_noresume(&uart->pdev->dev);
free_irq(uart->irq, (void *)uart);
}
}
}
@ -570,10 +572,9 @@ static ssize_t sleep_timeout_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct omap_uart_state *uart = container_of(pdev,
struct omap_uart_state, pdev);
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *odev = to_omap_device(pdev);
struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
return sprintf(buf, "%u\n", uart->timeout / HZ);
}
@ -582,10 +583,9 @@ static ssize_t sleep_timeout_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t n)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct omap_uart_state *uart = container_of(pdev,
struct omap_uart_state, pdev);
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *odev = to_omap_device(pdev);
struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
@ -608,48 +608,11 @@ static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show,
#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
#else
static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
static void omap_uart_block_sleep(struct omap_uart_state *uart) {}
#define DEV_CREATE_FILE(dev, attr)
#endif /* CONFIG_PM */
static struct omap_uart_state omap_uart[] = {
{
.pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data0,
},
},
}, {
.pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = serial_platform_data1,
},
},
}, {
.pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM2,
.dev = {
.platform_data = serial_platform_data2,
},
},
},
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
{
.pdev = {
.name = "serial8250",
.id = 3,
.dev = {
.platform_data = serial_platform_data3,
},
},
},
#endif
};
#ifndef CONFIG_SERIAL_OMAP
/*
* Override the default 8250 read handler: mem_serial_in()
* Empty RX fifo read causes an abort on omap3630 and omap4
@ -682,71 +645,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
}
__serial_write_reg(up, offset, value);
}
#endif
void __init omap_serial_early_init(void)
{
int i, nr_ports;
char name[16];
int i = 0;
if (!(cpu_is_omap3630() || cpu_is_omap4430()))
nr_ports = 3;
else
nr_ports = ARRAY_SIZE(omap_uart);
do {
char oh_name[MAX_UART_HWMOD_NAME_LEN];
struct omap_hwmod *oh;
struct omap_uart_state *uart;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
"uart%d", i + 1);
oh = omap_hwmod_lookup(oh_name);
if (!oh)
break;
for (i = 0; i < nr_ports; i++) {
struct omap_uart_state *uart = &omap_uart[i];
struct platform_device *pdev = &uart->pdev;
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
if (WARN_ON(!uart))
return;
uart->oh = oh;
uart->num = i++;
list_add_tail(&uart->node, &uart_list);
num_uarts++;
/* Don't map zero-based physical address */
if (p->mapbase == 0) {
dev_warn(dev, "no physical address for uart#%d,"
" so skipping early_init...\n", i);
continue;
}
/*
* Module 4KB + L4 interconnect 4KB
* Static mapping, never released
* NOTE: omap_hwmod_init() has not yet been called,
* so no hwmod functions will work yet.
*/
p->membase = ioremap(p->mapbase, SZ_8K);
if (!p->membase) {
dev_err(dev, "ioremap failed for uart%i\n", i + 1);
continue;
}
sprintf(name, "uart%d_ick", i + 1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
dev_err(dev, "Could not get uart%d_ick\n", i + 1);
uart->ick = NULL;
}
sprintf(name, "uart%d_fck", i+1);
uart->fck = clk_get(NULL, name);
if (IS_ERR(uart->fck)) {
dev_err(dev, "Could not get uart%d_fck\n", i + 1);
uart->fck = NULL;
}
/* FIXME: Remove this once the clkdev is ready */
if (!cpu_is_omap44xx()) {
if (!uart->ick || !uart->fck)
continue;
}
uart->num = i;
p->private_data = uart;
uart->p = p;
if (cpu_is_omap44xx())
p->irq += 32;
}
/*
* During UART early init, device need to be probed
* to determine SoC specific init before omap_device
* is ready. Therefore, don't allow idle here
*/
uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
} while (1);
}
/**
@ -763,53 +699,135 @@ void __init omap_serial_early_init(void)
void __init omap_serial_init_port(int port)
{
struct omap_uart_state *uart;
struct platform_device *pdev;
struct device *dev;
struct omap_hwmod *oh;
struct omap_device *od;
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
#ifndef CONFIG_SERIAL_OMAP
struct plat_serial8250_port ports[2] = {
{},
{.flags = 0},
};
struct plat_serial8250_port *p = &ports[0];
#else
struct omap_uart_port_info omap_up;
#endif
BUG_ON(port < 0);
BUG_ON(port >= ARRAY_SIZE(omap_uart));
uart = &omap_uart[port];
pdev = &uart->pdev;
dev = &pdev->dev;
/* Don't proceed if there's no clocks available */
if (unlikely(!uart->ick || !uart->fck)) {
WARN(1, "%s: can't init uart%d, no clocks available\n",
kobject_name(&dev->kobj), port);
if (WARN_ON(port < 0))
return;
}
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
omap_uart_idle_init(uart);
list_add_tail(&uart->node, &uart_list);
if (WARN_ON(platform_device_register(pdev)))
if (WARN_ON(port >= num_uarts))
return;
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(dev, true);
DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
}
list_for_each_entry(uart, &uart_list, node)
if (port == uart->num)
break;
oh = uart->oh;
uart->dma_enabled = 0;
#ifndef CONFIG_SERIAL_OMAP
name = "serial8250";
/*
* !! 8250 driver does not use standard IORESOURCE* It
* has it's own custom pdata that can be taken from
* the hwmod resource data. But, this needs to be
* done after the build.
*
* ?? does it have to be done before the register ??
* YES, because platform_device_data_add() copies
* pdata, it does not use a pointer.
*/
p->flags = UPF_BOOT_AUTOCONF;
p->iotype = UPIO_MEM;
p->regshift = 2;
p->uartclk = OMAP24XX_BASE_BAUD * 16;
p->irq = oh->mpu_irqs[0].irq;
p->mapbase = oh->slaves[0]->addr->pa_start;
p->membase = omap_hwmod_get_mpu_rt_va(oh);
p->irqflags = IRQF_SHARED;
p->private_data = uart;
/*
* omap44xx: Never read empty UART fifo
* omap3xxx: Never read empty UART fifo on UARTs
* with IP rev >=0x52
*/
uart->regshift = p->regshift;
uart->membase = p->membase;
if (cpu_is_omap44xx())
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
uart->p->serial_in = serial_in_override;
uart->p->serial_out = serial_out_override;
p->serial_in = serial_in_override;
p->serial_out = serial_out_override;
}
pdata = &ports[0];
pdata_size = 2 * sizeof(struct plat_serial8250_port);
#else
name = DRIVER_NAME;
omap_up.dma_enabled = uart->dma_enabled;
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
omap_up.mapbase = oh->slaves[0]->addr->pa_start;
omap_up.membase = omap_hwmod_get_mpu_rt_va(oh);
omap_up.irqflags = IRQF_SHARED;
omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
#endif
if (WARN_ON(!oh))
return;
od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
omap_uart_latency,
ARRAY_SIZE(omap_uart_latency), false);
WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
name, oh->name);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
uart->membase = omap_hwmod_get_mpu_rt_va(oh);
uart->pdev = &od->pdev;
oh->dev_attr = uart;
/*
* Because of early UART probing, UART did not get idled
* on init. Now that omap_device is ready, ensure full idle
* before doing omap_device_enable().
*/
omap_hwmod_idle(uart->oh);
omap_device_enable(uart->pdev);
omap_uart_idle_init(uart);
omap_uart_reset(uart);
omap_hwmod_enable_wakeup(uart->oh);
omap_device_idle(uart->pdev);
/*
* Need to block sleep long enough for interrupt driven
* driver to start. Console driver is in polling mode
* so device needs to be kept enabled while polling driver
* is in use.
*/
if (uart->timeout)
uart->timeout = (30 * HZ);
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(&od->pdev.dev, true);
DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
@ -826,13 +844,8 @@ void __init omap_serial_init_port(int port)
*/
void __init omap_serial_init(void)
{
int i, nr_ports;
struct omap_uart_state *uart;
if (!(cpu_is_omap3630() || cpu_is_omap4430()))
nr_ports = 3;
else
nr_ports = ARRAY_SIZE(omap_uart);
for (i = 0; i < nr_ports; i++)
omap_serial_init_port(i);
list_for_each_entry(uart, &uart_list, node)
omap_serial_init_port(uart->num);
}

16
arch/arm/plat-omap/common.c
View File

@ -257,7 +257,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
omap2_set_globals_sdrc(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
omap2_set_globals_uart(omap2_globals);
}
#endif
@ -272,9 +271,6 @@ static struct omap_globals omap242x_globals = {
.ctrl = OMAP2420_CTRL_BASE,
.prm = OMAP2420_PRM_BASE,
.cm = OMAP2420_CM_BASE,
.uart1_phys = OMAP2_UART1_BASE,
.uart2_phys = OMAP2_UART2_BASE,
.uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_242x(void)
@ -293,9 +289,6 @@ static struct omap_globals omap243x_globals = {
.ctrl = OMAP243X_CTRL_BASE,
.prm = OMAP2430_PRM_BASE,
.cm = OMAP2430_CM_BASE,
.uart1_phys = OMAP2_UART1_BASE,
.uart2_phys = OMAP2_UART2_BASE,
.uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_243x(void)
@ -314,10 +307,6 @@ static struct omap_globals omap3_globals = {
.ctrl = OMAP343X_CTRL_BASE,
.prm = OMAP3430_PRM_BASE,
.cm = OMAP3430_CM_BASE,
.uart1_phys = OMAP3_UART1_BASE,
.uart2_phys = OMAP3_UART2_BASE,
.uart3_phys = OMAP3_UART3_BASE,
.uart4_phys = OMAP3_UART4_BASE, /* Only on 3630 */
};
void __init omap2_set_globals_3xxx(void)
@ -341,10 +330,6 @@ static struct omap_globals omap4_globals = {
.prm = OMAP4430_PRM_BASE,
.cm = OMAP4430_CM_BASE,
.cm2 = OMAP4430_CM2_BASE,
.uart1_phys = OMAP4_UART1_BASE,
.uart2_phys = OMAP4_UART2_BASE,
.uart3_phys = OMAP4_UART3_BASE,
.uart4_phys = OMAP4_UART4_BASE,
};
void __init omap2_set_globals_443x(void)
@ -352,7 +337,6 @@ void __init omap2_set_globals_443x(void)
omap2_set_globals_tap(&omap4_globals);
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
omap2_set_globals_uart(&omap4_globals);
}
#endif

1
arch/arm/plat-omap/include/plat/common.h
View File

@ -67,7 +67,6 @@ void omap2_set_globals_tap(struct omap_globals *);
void omap2_set_globals_sdrc(struct omap_globals *);
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
void omap2_set_globals_uart(struct omap_globals *);
void omap3_map_io(void);

2
arch/arm/plat-omap/include/plat/dma.h
View File

@ -319,6 +319,8 @@
#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
/*----------------------------------------------------------------------------*/
#define OMAP1_DMA_TOUT_IRQ (1 << 0)

2
arch/arm/plat-omap/include/plat/irqs.h
View File

@ -345,6 +345,8 @@
#define INT_34XX_MMC3_IRQ 94
#define INT_34XX_GPT12_IRQ 95
#define INT_36XX_UART4_IRQ 80
#define INT_35XX_HECC0_IRQ 24
#define INT_35XX_HECC1_IRQ 28
#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67

129
arch/arm/plat-omap/include/plat/omap-serial.h 100644
View File

@ -0,0 +1,129 @@
/*
* Driver for OMAP-UART controller.
* Based on drivers/serial/8250.c
*
* Copyright (C) 2010 Texas Instruments.
*
* Authors:
* Govindraj R <govindraj.raja@ti.com>
* Thara Gopinath <thara@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __OMAP_SERIAL_H__
#define __OMAP_SERIAL_H__
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <plat/control.h>
#include <plat/mux.h>
#define DRIVER_NAME "omap-hsuart"
/*
* Use tty device name as ttyO, [O -> OMAP]
* in bootargs we specify as console=ttyO0 if uart1
* is used as console uart.
*/
#define OMAP_SERIAL_NAME "ttyO"
#define OMAP_MDR1_DISABLE 0x07
#define OMAP_MDR1_MODE13X 0x03
#define OMAP_MDR1_MODE16X 0x00
#define OMAP_MODE13X_SPEED 230400
/*
* LCR = 0XBF: Switch to Configuration Mode B.
* In configuration mode b allow access
* to EFR,DLL,DLH.
* Reference OMAP TRM Chapter 17
* Section: 1.4.3 Mode Selection
*/
#define OMAP_UART_LCR_CONF_MDB 0XBF
/* WER = 0x7F
* Enable module level wakeup in WER reg
*/
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
#define OMAP_UART_SW_TX 0x04
/* Enable XON/XOFF flow control on input */
#define OMAP_UART_SW_RX 0x04
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
#define OMAP_UART_SW_CLR 0XF0
#define OMAP_UART_FIFO_CLR 0X06
#define OMAP_UART_DMA_CH_FREE -1
#define RX_TIMEOUT (3 * HZ)
#define OMAP_MAX_HSUART_PORTS 4
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
struct omap_uart_port_info {
bool dma_enabled; /* To specify DMA Mode */
unsigned int uartclk; /* UART clock rate */
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
unsigned long irqflags; /* request_irq flags */
upf_t flags; /* UPF_* flags */
};
struct uart_omap_dma {
u8 uart_dma_tx;
u8 uart_dma_rx;
int rx_dma_channel;
int tx_dma_channel;
dma_addr_t rx_buf_dma_phys;
dma_addr_t tx_buf_dma_phys;
unsigned int uart_base;
/*
* Buffer for rx dma.It is not required for tx because the buffer
* comes from port structure.
*/
unsigned char *rx_buf;
unsigned int prev_rx_dma_pos;
int tx_buf_size;
int tx_dma_used;
int rx_dma_used;
spinlock_t tx_lock;
spinlock_t rx_lock;
/* timer to poll activity on rx dma */
struct timer_list rx_timer;
int rx_buf_size;
int rx_timeout;
};
struct uart_omap_port {
struct uart_port port;
struct uart_omap_dma uart_dma;
struct platform_device *pdev;
unsigned char ier;
unsigned char lcr;
unsigned char mcr;
unsigned char fcr;
unsigned char efr;
int use_dma;
/*
* Some bits in registers are cleared on a read, so they must
* be saved whenever the register is read but the bits will not
* be immediately processed.
*/
unsigned int lsr_break_flag;
unsigned char msr_saved_flags;
char name[20];
unsigned long port_activity;
};
#endif /* __OMAP_SERIAL_H__ */

27
drivers/serial/Kconfig
View File

@ -1416,6 +1416,33 @@ config SERIAL_OF_PLATFORM
Currently, only 8250 compatible ports are supported, but
others can easily be added.
config SERIAL_OMAP
tristate "OMAP serial port support"
depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
select SERIAL_CORE
help
If you have a machine based on an Texas Instruments OMAP CPU you
can enable its onboard serial ports by enabling this option.
By enabling this option you take advantage of dma feature available
with the omap-serial driver. DMA support can be enabled from platform
data.
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
depends on SERIAL_OMAP
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
console.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyOx". (Try "man bootparam" or see the documentation of
your boot loader about how to pass options to the kernel at
boot time.)
config SERIAL_OF_PLATFORM_NWPSERIAL
tristate "NWP serial port driver"
depends on PPC_OF && PPC_DCR

1
drivers/serial/Makefile
View File

@ -88,3 +88,4 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o

1333
drivers/serial/omap-serial.c 100644
View File

File diff suppressed because it is too large Load Diff

3
include/linux/serial_core.h
View File

@ -196,6 +196,9 @@
/* High Speed UART for Medfield */
#define PORT_MFD 95
/* TI OMAP-UART */
#define PORT_OMAP 96
#ifdef __KERNEL__
#include <linux/compiler.h>