serial: 8250: Add support for higher baud rates to Pericom chips
The Pericom chips can achieve additional baud rates by programming the sample clock register. The baud rates can be described as 921600 * 16 / (16 - scr) for scr values 5 to 15. The divisor is set to 1 for these baud rates. Adds new quirk for Pericom chips other than the four port chips to use the Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>alistair/sunxi64-5.4-dsi
Jay Dolan
Greg Kroah-Hartman
parent
4e828c3e09
commit
6bf4e42f1d
|
|
@ -1326,13 +1326,66 @@ static int pci_default_setup(struct serial_private *priv,
|
|||
|
||||
return setup_port(priv, port, bar, offset, board->reg_shift);
|
||||
}
|
||||
void
|
||||
pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
|
||||
unsigned int quot, unsigned int quot_frac)
|
||||
{
|
||||
int scr;
|
||||
int lcr;
|
||||
int actual_baud;
|
||||
int tolerance;
|
||||
|
||||
for (scr = 5 ; scr <= 15 ; scr++) {
|
||||
actual_baud = 921600 * 16 / scr;
|
||||
tolerance = actual_baud / 50;
|
||||
|
||||
if ((baud < actual_baud + tolerance) &&
|
||||
(baud > actual_baud - tolerance)) {
|
||||
|
||||
lcr = serial_port_in(port, UART_LCR);
|
||||
serial_port_out(port, UART_LCR, lcr | 0x80);
|
||||
|
||||
serial_port_out(port, UART_DLL, 1);
|
||||
serial_port_out(port, UART_DLM, 0);
|
||||
serial_port_out(port, 2, 16 - scr);
|
||||
serial_port_out(port, UART_LCR, lcr);
|
||||
return;
|
||||
} else if (baud > actual_baud) {
|
||||
break;
|
||||
}
|
||||
}
|
||||
serial8250_do_set_divisor(port, baud, quot, quot_frac);
|
||||
}
|
||||
static int pci_pericom_setup(struct serial_private *priv,
|
||||
const struct pciserial_board *board,
|
||||
struct uart_8250_port *port, int idx)
|
||||
{
|
||||
unsigned int bar, offset = board->first_offset, maxnr;
|
||||
|
||||
bar = FL_GET_BASE(board->flags);
|
||||
if (board->flags & FL_BASE_BARS)
|
||||
bar += idx;
|
||||
else
|
||||
offset += idx * board->uart_offset;
|
||||
|
||||
|
||||
maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
|
||||
(board->reg_shift + 3);
|
||||
|
||||
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
|
||||
return 1;
|
||||
|
||||
port->port.set_divisor = pericom_do_set_divisor;
|
||||
|
||||
return setup_port(priv, port, bar, offset, board->reg_shift);
|
||||
}
|
||||
|
||||
static int pci_pericom_setup_four_at_eight(struct serial_private *priv,
|
||||
const struct pciserial_board *board,
|
||||
struct uart_8250_port *port, int idx)
|
||||
{
|
||||
unsigned int bar, offset = board->first_offset, maxnr;
|
||||
|
||||
bar = FL_GET_BASE(board->flags);
|
||||
if (board->flags & FL_BASE_BARS)
|
||||
bar += idx;
|
||||
|
|
@ -1348,6 +1401,8 @@ static int pci_pericom_setup(struct serial_private *priv,
|
|||
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
|
||||
return 1;
|
||||
|
||||
port->port.set_divisor = pericom_do_set_divisor;
|
||||
|
||||
return setup_port(priv, port, bar, offset, board->reg_shift);
|
||||
}
|
||||
|
||||
|
|
@ -1995,7 +2050,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
|
|||
.device = PCI_DEVICE_ID_PERICOM_PI7C9X7954,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
/*
|
||||
* PLX
|
||||
|
|
@ -2032,107 +2087,113 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
|
|||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
.setup = pci_pericom_setup_four_at_eight,
|
||||
},
|
||||
/*
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ACCESIO,
|
||||
.device = PCI_ANY_ID,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_pericom_setup,
|
||||
}, /*
|
||||
* SBS Technologies, Inc., PMC-OCTALPRO 232
|
||||
*/
|
||||
{
|
||||
|
|
|
|||
Loading…
Reference in New Issue