redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

clk: si5351: Add PLL soft reset 

This is according to figure 12 ("I2C Programming Procedure") in
"Si5351A/B/C Data Sheet"
(https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351-B.pdf).

Without the PLL soft reset, we were unable to get three outputs
working at the same time.

According to Silicon Labs support, performing PLL soft reset will only
be noticeable if the PLL parameters have been changed.

Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Signed-off-by: Jens Rudberg <jens@teenage.engineering>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
hifive-unleashed-5.1
Jacob Siverskog 2015-11-20 19:03:13 +01:00 committed by Stephen Boyd
parent c1de13574d
commit 6dc669a22c
1 changed files with 7 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/clk/clk-si5351.c
View File

@ -1091,6 +1091,13 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
SI5351_CLK_POWERDOWN, 0);
/*
* Do a pll soft reset on both plls, needed in some cases to get
* all outputs running.
*/
si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET,
SI5351_PLL_RESET_A | SI5351_PLL_RESET_B);
dev_dbg(&hwdata->drvdata->client->dev,
"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
__func__, clk_hw_get_name(hw), (1 << rdiv),