diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index f869b03929db..e97c32314541 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -169,6 +169,22 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); + PIO data read/write + +void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); + + + +All bmdma-style drivers must implement this hook. This is the low-level +operation that actually copies the data bytes during a PIO data +transfer. +Typically the driver +will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or +ata_mmio_data_xfer(). + + + + ATA command execute void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); @@ -204,11 +220,10 @@ command. u8 (*check_status)(struct ata_port *ap); u8 (*check_altstatus)(struct ata_port *ap); -u8 (*check_err)(struct ata_port *ap); - Reads the Status/AltStatus/Error ATA shadow register from + Reads the Status/AltStatus ATA shadow register from hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use @@ -269,23 +284,6 @@ void (*set_mode) (struct ata_port *ap); - Reset ATA bus - -void (*phy_reset) (struct ata_port *ap); - - - - The very first step in the probe phase. Actions vary depending - on the bus type, typically. After waking up the device and probing - for device presence (PATA and SATA), typically a soft reset - (SRST) will be performed. Drivers typically use the helper - functions ata_bus_reset() or sata_phy_reset() for this hook. - Many SATA drivers use sata_phy_reset() or call it from within - their own phy_reset() functions. - - - - Control PCI IDE BMDMA engine void (*bmdma_setup) (struct ata_queued_cmd *qc); @@ -354,16 +352,74 @@ int (*qc_issue) (struct ata_queued_cmd *qc); - Timeout (error) handling + Exception and probe handling (EH) void (*eng_timeout) (struct ata_port *ap); +void (*phy_reset) (struct ata_port *ap); -This is a high level error handling function, called from the -error handling thread, when a command times out. Most newer -hardware will implement its own error handling code here. IDE BMDMA -drivers may use the helper function ata_eng_timeout(). +Deprecated. Use ->error_handler() instead. + + + +void (*freeze) (struct ata_port *ap); +void (*thaw) (struct ata_port *ap); + + + +ata_port_freeze() is called when HSM violations or some other +condition disrupts normal operation of the port. A frozen port +is not allowed to perform any operation until the port is +thawed, which usually follows a successful reset. + + + +The optional ->freeze() callback can be used for freezing the port +hardware-wise (e.g. mask interrupt and stop DMA engine). If a +port cannot be frozen hardware-wise, the interrupt handler +must ack and clear interrupts unconditionally while the port +is frozen. + + +The optional ->thaw() callback is called to perform the opposite of ->freeze(): +prepare the port for normal operation once again. Unmask interrupts, +start DMA engine, etc. + + + +void (*error_handler) (struct ata_port *ap); + + + +->error_handler() is a driver's hook into probe, hotplug, and recovery +and other exceptional conditions. The primary responsibility of an +implementation is to call ata_do_eh() or ata_bmdma_drive_eh() with a set +of EH hooks as arguments: + + + +'prereset' hook (may be NULL) is called during an EH reset, before any other actions +are taken. + + + +'postreset' hook (may be NULL) is called after the EH reset is performed. Based on +existing conditions, severity of the problem, and hardware capabilities, + + + +Either 'softreset' (may be NULL) or 'hardreset' (may be NULL) will be +called to perform the low-level EH reset. + + + +void (*post_internal_cmd) (struct ata_queued_cmd *qc); + + + +Perform any hardware-specific actions necessary to finish processing +after executing a probe-time or EH-time command via ata_exec_internal(). diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index b22ee5462318..6e9dbf4d8077 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -74,6 +74,7 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, { 0 } }; @@ -488,7 +489,8 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"), /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"), - /* 17 */ DECLARE_AMD_DEV("AMD5536"), + /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"), + /* 18 */ DECLARE_AMD_DEV("AMD5536"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -525,7 +527,8 @@ static struct pci_device_id amd74xx_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 }, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 9ae4361e352c..84d546323dc7 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -165,7 +165,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o +libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index b4f8fb1d628b..4bb77f62b3b9 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -48,7 +48,7 @@ #include #define DRV_NAME "ahci" -#define DRV_VERSION "1.2" +#define DRV_VERSION "1.3" enum { @@ -56,12 +56,15 @@ enum { AHCI_MAX_SG = 168, /* hardware max is 64K */ AHCI_DMA_BOUNDARY = 0xffffffff, AHCI_USE_CLUSTERING = 0, - AHCI_CMD_SLOT_SZ = 32 * 32, + AHCI_MAX_CMDS = 32, + AHCI_CMD_SZ = 32, + AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, AHCI_RX_FIS_SZ = 256, - AHCI_CMD_TBL_HDR = 0x80, AHCI_CMD_TBL_CDB = 0x40, - AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16), - AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ + + AHCI_CMD_TBL_HDR_SZ = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), + AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ, AHCI_IRQ_ON_SG = (1 << 31), AHCI_CMD_ATAPI = (1 << 5), @@ -71,8 +74,10 @@ enum { AHCI_CMD_CLR_BUSY = (1 << 10), RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ + RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ board_ahci = 0, + board_ahci_vt8251 = 1, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -87,8 +92,9 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -127,15 +133,17 @@ enum { PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ - PORT_IRQ_FATAL = PORT_IRQ_TF_ERR | - PORT_IRQ_HBUS_ERR | - PORT_IRQ_HBUS_DATA_ERR | - PORT_IRQ_IF_ERR, - DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY | - PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE | - PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS | - PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS | - PORT_IRQ_D2H_REG_FIS, + PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | + PORT_IRQ_IF_ERR | + PORT_IRQ_CONNECT | + PORT_IRQ_PHYRDY | + PORT_IRQ_UNK_FIS, + PORT_IRQ_ERROR = PORT_IRQ_FREEZE | + PORT_IRQ_TF_ERR | + PORT_IRQ_HBUS_DATA_ERR, + DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, /* PORT_CMD bits */ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ @@ -153,6 +161,10 @@ enum { /* hpriv->flags bits */ AHCI_FLAG_MSI = (1 << 0), + + /* ap->flags bits */ + AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), + AHCI_FLAG_NO_NCQ = (1 << 25), }; struct ahci_cmd_hdr { @@ -181,7 +193,6 @@ struct ahci_port_priv { dma_addr_t cmd_slot_dma; void *cmd_tbl; dma_addr_t cmd_tbl_dma; - struct ahci_sg *cmd_tbl_sg; void *rx_fis; dma_addr_t rx_fis_dma; }; @@ -191,15 +202,16 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes); static void ahci_irq_clear(struct ata_port *ap); -static void ahci_eng_timeout(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); -static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +static void ahci_freeze(struct ata_port *ap); +static void ahci_thaw(struct ata_port *ap); +static void ahci_error_handler(struct ata_port *ap); +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); static void ahci_remove_one (struct pci_dev *pdev); static struct scsi_host_template ahci_sht = { @@ -207,7 +219,8 @@ static struct scsi_host_template ahci_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, + .change_queue_depth = ata_scsi_change_queue_depth, + .can_queue = AHCI_MAX_CMDS - 1, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = AHCI_MAX_SG, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, @@ -216,6 +229,7 @@ static struct scsi_host_template ahci_sht = { .proc_name = DRV_NAME, .dma_boundary = AHCI_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -228,19 +242,21 @@ static const struct ata_port_operations ahci_ops = { .tf_read = ahci_tf_read, - .probe_reset = ahci_probe_reset, - .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, - .eng_timeout = ahci_eng_timeout, - .irq_handler = ahci_interrupt, .irq_clear = ahci_irq_clear, .scr_read = ahci_scr_read, .scr_write = ahci_scr_write, + .freeze = ahci_freeze, + .thaw = ahci_thaw, + + .error_handler = ahci_error_handler, + .post_internal_cmd = ahci_post_internal_cmd, + .port_start = ahci_port_start, .port_stop = ahci_port_stop, }; @@ -250,7 +266,19 @@ static const struct ata_port_info ahci_port_info[] = { { .sht = &ahci_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_SKIP_D2H_BSY, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &ahci_ops, + }, + /* board_ahci_vt8251 */ + { + .sht = &ahci_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_SKIP_D2H_BSY | + AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, @@ -258,6 +286,7 @@ static const struct ata_port_info ahci_port_info[] = { }; static const struct pci_device_id ahci_pci_tbl[] = { + /* Intel */ { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ICH6 */ { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -288,14 +317,39 @@ static const struct pci_device_id ahci_pci_tbl[] = { board_ahci }, /* ICH8M */ { PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ICH8M */ + + /* JMicron */ { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* JMicron JMB360 */ + { 0x197b, 0x2361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB361 */ { 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* JMicron JMB363 */ + { 0x197b, 0x2365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB365 */ + { 0x197b, 0x2366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB366 */ + + /* ATI */ { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ATI SB600 non-raid */ { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ATI SB600 raid */ + + /* VIA */ + { PCI_VENDOR_ID_VIA, 0x3349, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci_vt8251 }, /* VIA VT8251 */ + + /* NVIDIA */ + { PCI_VENDOR_ID_NVIDIA, 0x044c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* MCP65 */ + { } /* terminate list */ }; @@ -374,8 +428,6 @@ static int ahci_port_start(struct ata_port *ap) pp->cmd_tbl = mem; pp->cmd_tbl_dma = mem_dma; - pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR; - ap->private_data = pp; if (hpriv->cap & HOST_CAP_64) @@ -508,46 +560,71 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts) +static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts) { - pp->cmd_slot[0].opts = cpu_to_le32(opts); - pp->cmd_slot[0].status = 0; - pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); + dma_addr_t cmd_tbl_dma; + + cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; + + pp->cmd_slot[tag].opts = cpu_to_le32(opts); + pp->cmd_slot[tag].status = 0; + pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); } -static int ahci_poll_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec) +static int ahci_clo(struct ata_port *ap) { - unsigned long timeout; + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + struct ahci_host_priv *hpriv = ap->host_set->private_data; u32 tmp; - timeout = jiffies + (timeout_msec * HZ) / 1000; - do { - tmp = readl(reg); - if ((tmp & mask) == val) - return 0; - msleep(interval_msec); - } while (time_before(jiffies, timeout)); + if (!(hpriv->cap & HOST_CAP_CLO)) + return -EOPNOTSUPP; - return -1; + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_CLO; + writel(tmp, port_mmio + PORT_CMD); + + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); + if (tmp & PORT_CMD_CLO) + return -EIO; + + return 0; } -static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) +static int ahci_prereset(struct ata_port *ap) +{ + if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && + (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { + /* ATA_BUSY hasn't cleared, so send a CLO */ + ahci_clo(ap); + } + + return ata_std_prereset(ap); +} + +static int ahci_softreset(struct ata_port *ap, unsigned int *class) { - struct ahci_host_priv *hpriv = ap->host_set->private_data; struct ahci_port_priv *pp = ap->private_data; void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); const u32 cmd_fis_len = 5; /* five dwords */ const char *reason = NULL; struct ata_taskfile tf; + u32 tmp; u8 *fis; int rc; DPRINTK("ENTER\n"); + if (ata_port_offline(ap)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + return 0; + } + /* prepare for SRST (AHCI-1.1 10.4.1) */ rc = ahci_stop_engine(ap); if (rc) { @@ -558,23 +635,13 @@ static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) /* check BUSY/DRQ, perform Command List Override if necessary */ ahci_tf_read(ap, &tf); if (tf.command & (ATA_BUSY | ATA_DRQ)) { - u32 tmp; + rc = ahci_clo(ap); - if (!(hpriv->cap & HOST_CAP_CLO)) { - rc = -EIO; - reason = "port busy but no CLO"; + if (rc == -EOPNOTSUPP) { + reason = "port busy but CLO unavailable"; goto fail_restart; - } - - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_CLO; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - if (ahci_poll_register(port_mmio + PORT_CMD, PORT_CMD_CLO, 0x0, - 1, 500)) { - rc = -EIO; - reason = "CLO failed"; + } else if (rc) { + reason = "port busy but CLO failed"; goto fail_restart; } } @@ -582,20 +649,21 @@ static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) /* restart engine */ ahci_start_engine(ap); - ata_tf_init(ap, &tf, 0); + ata_tf_init(ap->device, &tf); fis = pp->cmd_tbl; /* issue the first D2H Register FIS */ - ahci_fill_cmd_slot(pp, cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); + ahci_fill_cmd_slot(pp, 0, + cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); tf.ctl |= ATA_SRST; ata_tf_to_fis(&tf, fis, 0); fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ writel(1, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - if (ahci_poll_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x0, 1, 500)) { + tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, 1, 500); + if (tmp & 0x1) { rc = -EIO; reason = "1st FIS failed"; goto fail; @@ -605,7 +673,7 @@ static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) msleep(1); /* issue the second D2H Register FIS */ - ahci_fill_cmd_slot(pp, cmd_fis_len); + ahci_fill_cmd_slot(pp, 0, cmd_fis_len); tf.ctl &= ~ATA_SRST; ata_tf_to_fis(&tf, fis, 0); @@ -625,7 +693,7 @@ static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) msleep(150); *class = ATA_DEV_NONE; - if (sata_dev_present(ap)) { + if (ata_port_online(ap)) { if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { rc = -EIO; reason = "device not ready"; @@ -640,25 +708,31 @@ static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class) fail_restart: ahci_start_engine(ap); fail: - if (verbose) - printk(KERN_ERR "ata%u: softreset failed (%s)\n", - ap->id, reason); - else - DPRINTK("EXIT, rc=%d reason=\"%s\"\n", rc, reason); + ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); return rc; } -static int ahci_hardreset(struct ata_port *ap, int verbose, unsigned int *class) +static int ahci_hardreset(struct ata_port *ap, unsigned int *class) { + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; int rc; DPRINTK("ENTER\n"); ahci_stop_engine(ap); - rc = sata_std_hardreset(ap, verbose, class); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(ap->device, &tf); + tf.command = 0xff; + ata_tf_to_fis(&tf, d2h_fis, 0); + + rc = sata_std_hardreset(ap, class); + ahci_start_engine(ap); - if (rc == 0) + if (rc == 0 && ata_port_online(ap)) *class = ahci_dev_classify(ap); if (*class == ATA_DEV_UNKNOWN) *class = ATA_DEV_NONE; @@ -686,13 +760,6 @@ static void ahci_postreset(struct ata_port *ap, unsigned int *class) } } -static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - return ata_drive_probe_reset(ap, ata_std_probeinit, - ahci_softreset, ahci_hardreset, - ahci_postreset, classes); -} - static u8 ahci_check_status(struct ata_port *ap) { void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -708,9 +775,8 @@ static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) ata_tf_from_fis(d2h_fis, tf); } -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc) +static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) { - struct ahci_port_priv *pp = qc->ap->private_data; struct scatterlist *sg; struct ahci_sg *ahci_sg; unsigned int n_sg = 0; @@ -720,7 +786,7 @@ static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc) /* * Next, the S/G list. */ - ahci_sg = pp->cmd_tbl_sg; + ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; ata_for_each_sg(sg, qc) { dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); @@ -741,6 +807,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct ahci_port_priv *pp = ap->private_data; int is_atapi = is_atapi_taskfile(&qc->tf); + void *cmd_tbl; u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ unsigned int n_elem; @@ -749,16 +816,17 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) * Fill in command table information. First, the header, * a SATA Register - Host to Device command FIS. */ - ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); + cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, cmd_tbl, 0); if (is_atapi) { - memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, - qc->dev->cdb_len); + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); } n_elem = 0; if (qc->flags & ATA_QCFLAG_DMAMAP) - n_elem = ahci_fill_sg(qc); + n_elem = ahci_fill_sg(qc, cmd_tbl); /* * Fill in command slot information. @@ -769,112 +837,122 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) if (is_atapi) opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; - ahci_fill_cmd_slot(pp, opts); + ahci_fill_cmd_slot(pp, qc->tag, opts); } -static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) +static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) { - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; + struct ahci_port_priv *pp = ap->private_data; + struct ata_eh_info *ehi = &ap->eh_info; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 serror; - if ((ap->device[0].class != ATA_DEV_ATAPI) || - ((irq_stat & PORT_IRQ_TF_ERR) == 0)) - printk(KERN_WARNING "ata%u: port reset, " - "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", - ap->id, - irq_stat, - readl(mmio + HOST_IRQ_STAT), - readl(port_mmio + PORT_IRQ_STAT), - readl(port_mmio + PORT_CMD), - readl(port_mmio + PORT_TFDATA), - readl(port_mmio + PORT_SCR_STAT), - readl(port_mmio + PORT_SCR_ERR)); + ata_ehi_clear_desc(ehi); - /* stop DMA */ - ahci_stop_engine(ap); + /* AHCI needs SError cleared; otherwise, it might lock up */ + serror = ahci_scr_read(ap, SCR_ERROR); + ahci_scr_write(ap, SCR_ERROR, serror); - /* clear SATA phy error, if any */ - tmp = readl(port_mmio + PORT_SCR_ERR); - writel(tmp, port_mmio + PORT_SCR_ERR); + /* analyze @irq_stat */ + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); - /* if DRQ/BSY is set, device needs to be reset. - * if so, issue COMRESET - */ - tmp = readl(port_mmio + PORT_TFDATA); - if (tmp & (ATA_BUSY | ATA_DRQ)) { - writel(0x301, port_mmio + PORT_SCR_CTL); - readl(port_mmio + PORT_SCR_CTL); /* flush */ - udelay(10); - writel(0x300, port_mmio + PORT_SCR_CTL); - readl(port_mmio + PORT_SCR_CTL); /* flush */ + if (irq_stat & PORT_IRQ_TF_ERR) + err_mask |= AC_ERR_DEV; + + if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { + err_mask |= AC_ERR_HOST_BUS; + action |= ATA_EH_SOFTRESET; } - /* re-start DMA */ - ahci_start_engine(ap); -} + if (irq_stat & PORT_IRQ_IF_ERR) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", interface fatal error"); + } -static void ahci_eng_timeout(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - struct ata_queued_cmd *qc; - unsigned long flags; + if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ? + "connection status changed" : "PHY RDY changed"); + } - printk(KERN_WARNING "ata%u: handling error/timeout\n", ap->id); + if (irq_stat & PORT_IRQ_UNK_FIS) { + u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); - spin_lock_irqsave(&host_set->lock, flags); + err_mask |= AC_ERR_HSM; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", unknown FIS %08x %08x %08x %08x", + unk[0], unk[1], unk[2], unk[3]); + } + + /* okay, let's hand over to EH */ + ehi->serror |= serror; + ehi->action |= action; - ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); qc = ata_qc_from_tag(ap, ap->active_tag); - qc->err_mask |= AC_ERR_TIMEOUT; + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; - spin_unlock_irqrestore(&host_set->lock, flags); - - ata_eh_qc_complete(qc); + if (irq_stat & PORT_IRQ_FREEZE) + ata_port_freeze(ap); + else + ata_port_abort(ap); } -static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) +static void ahci_host_intr(struct ata_port *ap) { void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 status, serr, ci; - - serr = readl(port_mmio + PORT_SCR_ERR); - writel(serr, port_mmio + PORT_SCR_ERR); + struct ata_eh_info *ehi = &ap->eh_info; + u32 status, qc_active; + int rc; status = readl(port_mmio + PORT_IRQ_STAT); writel(status, port_mmio + PORT_IRQ_STAT); - ci = readl(port_mmio + PORT_CMD_ISSUE); - if (likely((ci & 0x1) == 0)) { - if (qc) { - WARN_ON(qc->err_mask); - ata_qc_complete(qc); - qc = NULL; - } + if (unlikely(status & PORT_IRQ_ERROR)) { + ahci_error_intr(ap, status); + return; } - if (status & PORT_IRQ_FATAL) { - unsigned int err_mask; - if (status & PORT_IRQ_TF_ERR) - err_mask = AC_ERR_DEV; - else if (status & PORT_IRQ_IF_ERR) - err_mask = AC_ERR_ATA_BUS; - else - err_mask = AC_ERR_HOST_BUS; + if (ap->sactive) + qc_active = readl(port_mmio + PORT_SCR_ACT); + else + qc_active = readl(port_mmio + PORT_CMD_ISSUE); - /* command processing has stopped due to error; restart */ - ahci_restart_port(ap, status); - - if (qc) { - qc->err_mask |= err_mask; - ata_qc_complete(qc); - } + rc = ata_qc_complete_multiple(ap, qc_active, NULL); + if (rc > 0) + return; + if (rc < 0) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); + return; } - return 1; + /* hmmm... a spurious interupt */ + + /* some devices send D2H reg with I bit set during NCQ command phase */ + if (ap->sactive && status & PORT_IRQ_D2H_REG_FIS) + return; + + /* ignore interim PIO setup fis interrupts */ + if (ata_tag_valid(ap->active_tag)) { + struct ata_queued_cmd *qc = + ata_qc_from_tag(ap, ap->active_tag); + + if (qc && qc->tf.protocol == ATA_PROT_PIO && + (status & PORT_IRQ_PIOS_FIS)) + return; + } + + if (ata_ratelimit()) + ata_port_printk(ap, KERN_INFO, "spurious interrupt " + "(irq_stat 0x%x active_tag %d sactive 0x%x)\n", + status, ap->active_tag, ap->sactive); } static void ahci_irq_clear(struct ata_port *ap) @@ -882,7 +960,7 @@ static void ahci_irq_clear(struct ata_port *ap) /* TODO */ } -static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs) +static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; struct ahci_host_priv *hpriv; @@ -911,14 +989,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * ap = host_set->ports[i]; if (ap) { - struct ata_queued_cmd *qc; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (!ahci_host_intr(ap, qc)) - if (ata_ratelimit()) - dev_printk(KERN_WARNING, host_set->dev, - "unhandled interrupt on port %u\n", - i); - + ahci_host_intr(ap); VPRINTK("port %u\n", i); } else { VPRINTK("port %u (no irq)\n", i); @@ -935,7 +1006,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * handled = 1; } - spin_unlock(&host_set->lock); + spin_unlock(&host_set->lock); VPRINTK("EXIT\n"); @@ -947,12 +1018,65 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - writel(1, port_mmio + PORT_CMD_ISSUE); + if (qc->tf.protocol == ATA_PROT_NCQ) + writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); + writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); /* flush */ return 0; } +static void ahci_freeze(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + + /* turn IRQ off */ + writel(0, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + + /* clear IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + writel(tmp, port_mmio + PORT_IRQ_STAT); + writel(1 << ap->id, mmio + HOST_IRQ_STAT); + + /* turn IRQ back on */ + writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_error_handler(struct ata_port *ap) +{ + if (!(ap->flags & ATA_FLAG_FROZEN)) { + /* restart engine */ + ahci_stop_engine(ap); + ahci_start_engine(ap); + } + + /* perform recovery */ + ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset, + ahci_postreset); +} + +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask) { + /* make DMA engine forget about the failed command */ + ahci_stop_engine(ap); + ahci_start_engine(ap); + } +} + static void ahci_setup_port(struct ata_ioports *port, unsigned long base, unsigned int port_idx) { @@ -1097,9 +1221,6 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent) writel(tmp, port_mmio + PORT_IRQ_STAT); writel(1 << i, mmio + HOST_IRQ_STAT); - - /* set irq mask (enables interrupts) */ - writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); } tmp = readl(mmio + HOST_CTL); @@ -1197,6 +1318,8 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) VPRINTK("ENTER\n"); + WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); + if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -1264,6 +1387,10 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_hpriv; + if (!(probe_ent->host_flags & AHCI_FLAG_NO_NCQ) && + (hpriv->cap & HOST_CAP_NCQ)) + probe_ent->host_flags |= ATA_FLAG_NCQ; + ahci_print_info(probe_ent); /* FIXME: check ata_device_add return value */ @@ -1295,21 +1422,17 @@ static void ahci_remove_one (struct pci_dev *pdev) struct device *dev = pci_dev_to_dev(pdev); struct ata_host_set *host_set = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host_set->private_data; - struct ata_port *ap; unsigned int i; int have_msi; - for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; - - scsi_remove_host(ap->host); - } + for (i = 0; i < host_set->n_ports; i++) + ata_port_detach(host_set->ports[i]); have_msi = hpriv->flags & AHCI_FLAG_MSI; free_irq(host_set->irq, host_set); for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; + struct ata_port *ap = host_set->ports[i]; ata_scsi_release(ap->host); scsi_host_put(ap->host); diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 6dc88149f9f1..521b718763f6 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -93,7 +93,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.05" +#define DRV_VERSION "1.10" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -146,11 +146,10 @@ struct piix_map_db { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); - -static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes); -static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void piix_pata_error_handler(struct ata_port *ap); +static void piix_sata_error_handler(struct ata_port *ap); static unsigned int in_module_init = 1; @@ -159,6 +158,7 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, #endif /* NOTE: The following PCI ids must be kept in sync with the @@ -218,6 +218,7 @@ static struct scsi_host_template piix_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, .resume = ata_scsi_device_resume, .suspend = ata_scsi_device_suspend, @@ -227,6 +228,7 @@ static const struct ata_port_operations piix_pata_ops = { .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, + .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -234,16 +236,18 @@ static const struct ata_port_operations piix_pata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = piix_pata_probe_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -262,16 +266,18 @@ static const struct ata_port_operations piix_sata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = piix_sata_probe_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_sata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -455,59 +461,51 @@ cbl40: } /** - * piix_pata_probeinit - probeinit for PATA host controller + * piix_pata_prereset - prereset for PATA host controller * @ap: Target port * - * Probeinit including cable detection. + * Prereset including cable detection. * * LOCKING: * None (inherited from caller). */ -static void piix_pata_probeinit(struct ata_port *ap) -{ - piix_pata_cbl_detect(ap); - ata_std_probeinit(ap); -} - -/** - * piix_pata_probe_reset - Perform reset on PATA port and classify - * @ap: Port to reset - * @classes: Resulting classes of attached devices - * - * Reset PATA phy and classify attached devices. - * - * LOCKING: - * None (inherited from caller). - */ -static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) +static int piix_pata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { - printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - return ata_drive_probe_reset(ap, piix_pata_probeinit, - ata_std_softreset, NULL, - ata_std_postreset, classes); + piix_pata_cbl_detect(ap); + + return ata_std_prereset(ap); +} + +static void piix_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL, + ata_std_postreset); } /** - * piix_sata_probe - Probe PCI device for present SATA devices - * @ap: Port associated with the PCI device we wish to probe + * piix_sata_prereset - prereset for SATA host controller + * @ap: Target port * * Reads and configures SATA PCI device's PCI config register * Port Configuration and Status (PCS) to determine port and - * device availability. + * device availability. Return -ENODEV to skip reset if no + * device is present. * * LOCKING: * None (inherited from caller). * * RETURNS: - * Mask of avaliable devices on the port. + * 0 if device is present, -ENODEV otherwise. */ -static unsigned int piix_sata_probe (struct ata_port *ap) +static int piix_sata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); const unsigned int *map = ap->host_set->private_data; @@ -549,29 +547,19 @@ static unsigned int piix_sata_probe (struct ata_port *ap) DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", ap->id, pcs, present_mask); - return present_mask; -} - -/** - * piix_sata_probe_reset - Perform reset on SATA port and classify - * @ap: Port to reset - * @classes: Resulting classes of attached devices - * - * Reset SATA phy and classify attached devices. - * - * LOCKING: - * None (inherited from caller). - */ -static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - if (!piix_sata_probe(ap)) { - printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id); + if (!present_mask) { + ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - return ata_drive_probe_reset(ap, ata_std_probeinit, - ata_std_softreset, NULL, - ata_std_postreset, classes); + return ata_std_prereset(ap); +} + +static void piix_sata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, + ata_std_postreset); } /** @@ -760,15 +748,15 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if(rev == 0x00) + if (rev == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if(cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && rev < 5) no_piix_dma = 2; } - if(no_piix_dma) + if (no_piix_dma) dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); - if(no_piix_dma == 2) + if (no_piix_dma == 2) dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); return no_piix_dma; } diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c index 835dff0bafdc..004e1a0d8b71 100644 --- a/drivers/scsi/libata-bmdma.c +++ b/drivers/scsi/libata-bmdma.c @@ -652,6 +652,151 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) ata_altstatus(ap); /* dummy read */ } +/** + * ata_bmdma_freeze - Freeze BMDMA controller port + * @ap: port to freeze + * + * Freeze BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_freeze(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); +} + +/** + * ata_bmdma_thaw - Thaw BMDMA controller port + * @ap: port to thaw + * + * Thaw BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_thaw(struct ata_port *ap) +{ + /* clear & re-enable interrupts */ + ata_chk_status(ap); + ap->ops->irq_clear(ap); + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); +} + +/** + * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller + * @ap: port to handle error for + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Handle error for ATA BMDMA controller. It can handle both + * PATA and SATA controllers. Many controllers should be able to + * use this EH as-is or with some added handling before and + * after. + * + * This function is intended to be used for constructing + * ->error_handler callback by low level drivers. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_queued_cmd *qc; + unsigned long flags; + int thaw = 0; + + qc = __ata_qc_from_tag(ap, ap->active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + /* reset PIO HSM and stop DMA engine */ + spin_lock_irqsave(ap->lock, flags); + + ap->hsm_task_state = HSM_ST_IDLE; + + if (qc && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { + u8 host_stat; + + host_stat = ata_bmdma_status(ap); + + ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); + + /* BMDMA controllers indicate host bus error by + * setting DMA_ERR bit and timing out. As it wasn't + * really a timeout event, adjust error mask and + * cancel frozen state. + */ + if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { + qc->err_mask = AC_ERR_HOST_BUS; + thaw = 1; + } + + ap->ops->bmdma_stop(qc); + } + + ata_altstatus(ap); + ata_chk_status(ap); + ap->ops->irq_clear(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + if (thaw) + ata_eh_thaw_port(ap); + + /* PIO and DMA engines have been stopped, perform recovery */ + ata_do_eh(ap, prereset, softreset, hardreset, postreset); +} + +/** + * ata_bmdma_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + * + * Stock error handler for BMDMA controller. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_error_handler(struct ata_port *ap) +{ + ata_reset_fn_t hardreset; + + hardreset = NULL; + if (sata_scr_valid(ap)) + hardreset = sata_std_hardreset; + + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, + ata_std_postreset); +} + +/** + * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for + * BMDMA controller + * @qc: internal command to clean up + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + #ifdef CONFIG_PCI static struct ata_probe_ent * ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) @@ -930,10 +1075,21 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, /* FIXME: check ata_device_add return */ if (legacy_mode) { - if (legacy_mode & (1 << 0)) + struct device *dev = &pdev->dev; + struct ata_host_set *host_set = NULL; + + if (legacy_mode & (1 << 0)) { ata_device_add(probe_ent); - if (legacy_mode & (1 << 1)) + host_set = dev_get_drvdata(dev); + } + + if (legacy_mode & (1 << 1)) { ata_device_add(probe_ent2); + if (host_set) { + host_set->next = dev_get_drvdata(dev); + dev_set_drvdata(dev, host_set); + } + } } else ata_device_add(probe_ent); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index de9ba7890b5a..6c66877be2bf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,22 +61,29 @@ #include "libata.h" -static unsigned int ata_dev_init_params(struct ata_port *ap, - struct ata_device *dev, - u16 heads, - u16 sectors); -static void ata_set_mode(struct ata_port *ap); -static unsigned int ata_dev_set_xfermode(struct ata_port *ap, - struct ata_device *dev); -static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev); +/* debounce timing parameters in msecs { interval, duration, timeout } */ +const unsigned long sata_deb_timing_boot[] = { 5, 100, 2000 }; +const unsigned long sata_deb_timing_eh[] = { 25, 500, 2000 }; +const unsigned long sata_deb_timing_before_fsrst[] = { 100, 2000, 5000 }; + +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors); +static unsigned int ata_dev_set_xfermode(struct ata_device *dev); +static void ata_dev_xfermask(struct ata_device *dev); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; +struct workqueue_struct *ata_aux_wq; + int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); +int atapi_dmadir = 0; +module_param(atapi_dmadir, int, 0444); +MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); + int libata_fua = 0; module_param_named(fua, libata_fua, int, 0444); MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); @@ -397,11 +404,22 @@ static const char *ata_mode_string(unsigned int xfer_mask) return ""; } -static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev) +static const char *sata_spd_string(unsigned int spd) { - if (ata_dev_present(dev)) { - printk(KERN_WARNING "ata%u: dev %u disabled\n", - ap->id, dev->devno); + static const char * const spd_str[] = { + "1.5 Gbps", + "3.0 Gbps", + }; + + if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) + return ""; + return spd_str[spd - 1]; +} + +void ata_dev_disable(struct ata_device *dev) +{ + if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { + ata_dev_printk(dev, KERN_WARNING, "disabled\n"); dev->class++; } } @@ -759,8 +777,11 @@ void ata_std_dev_select (struct ata_port *ap, unsigned int device) void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep) { - VPRINTK("ENTER, ata%u: device %u, wait %u\n", - ap->id, device, wait); + if (ata_msg_probe(ap)) { + ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " + "device %u, wait %u\n", + ap->id, device, wait); + } if (wait) ata_wait_idle(ap); @@ -915,9 +936,9 @@ void ata_port_flush_task(struct ata_port *ap) DPRINTK("ENTER\n"); - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); DPRINTK("flush #1\n"); flush_workqueue(ata_wq); @@ -928,30 +949,31 @@ void ata_port_flush_task(struct ata_port *ap) * Cancel and flush. */ if (!cancel_delayed_work(&ap->port_task)) { - DPRINTK("flush #2\n"); + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", __FUNCTION__); flush_workqueue(ata_wq); } - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); - DPRINTK("EXIT\n"); + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); } void ata_qc_complete_internal(struct ata_queued_cmd *qc) { struct completion *waiting = qc->private_data; - qc->ap->ops->tf_read(qc->ap, &qc->tf); complete(waiting); } /** * ata_exec_internal - execute libata internal command - * @ap: Port to which the command is sent * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result + * @cdb: CDB for packet command * @dma_dir: Data tranfer direction of the command * @buf: Data buffer of the command * @buflen: Length of data buffer @@ -964,25 +986,66 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) * * LOCKING: * None. Should be called with kernel context, might sleep. + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure */ - -static unsigned -ata_exec_internal(struct ata_port *ap, struct ata_device *dev, - struct ata_taskfile *tf, - int dma_dir, void *buf, unsigned int buflen) +unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen) { + struct ata_port *ap = dev->ap; u8 command = tf->command; struct ata_queued_cmd *qc; + unsigned int tag, preempted_tag; + u32 preempted_sactive, preempted_qc_active; DECLARE_COMPLETION(wait); unsigned long flags; unsigned int err_mask; + int rc; - spin_lock_irqsave(&ap->host_set->lock, flags); + spin_lock_irqsave(ap->lock, flags); - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); + /* no internal command while frozen */ + if (ap->flags & ATA_FLAG_FROZEN) { + spin_unlock_irqrestore(ap->lock, flags); + return AC_ERR_SYSTEM; + } + /* initialize internal qc */ + + /* XXX: Tag 0 is used for drivers with legacy EH as some + * drivers choke if any other tag is given. This breaks + * ata_tag_internal() test for those drivers. Don't use new + * EH stuff without converting to it. + */ + if (ap->ops->error_handler) + tag = ATA_TAG_INTERNAL; + else + tag = 0; + + if (test_and_set_bit(tag, &ap->qc_allocated)) + BUG(); + qc = __ata_qc_from_tag(ap, tag); + + qc->tag = tag; + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + ata_qc_reinit(qc); + + preempted_tag = ap->active_tag; + preempted_sactive = ap->sactive; + preempted_qc_active = ap->qc_active; + ap->active_tag = ATA_TAG_POISON; + ap->sactive = 0; + ap->qc_active = 0; + + /* prepare & issue qc */ qc->tf = *tf; + if (cdb) + memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { ata_sg_init_one(qc, buf, buflen); @@ -994,33 +1057,58 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); - if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) { - ata_port_flush_task(ap); + rc = wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL); - spin_lock_irqsave(&ap->host_set->lock, flags); + ata_port_flush_task(ap); + + if (!rc) { + spin_lock_irqsave(ap->lock, flags); /* We're racing with irq here. If we lose, the * following test prevents us from completing the qc - * again. If completion irq occurs after here but - * before the caller cleans up, it will result in a - * spurious interrupt. We can live with that. + * twice. If we win, the port is frozen and will be + * cleaned up by ->post_internal_cmd(). */ if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask = AC_ERR_TIMEOUT; - ata_qc_complete(qc); - printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n", - ap->id, command); + qc->err_mask |= AC_ERR_TIMEOUT; + + if (ap->ops->error_handler) + ata_port_freeze(ap); + else + ata_qc_complete(qc); + + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "qc timeout (cmd 0x%x)\n", command); } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } - *tf = qc->tf; + /* do post_internal_cmd */ + if (ap->ops->post_internal_cmd) + ap->ops->post_internal_cmd(qc); + + if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "zero err_mask for failed " + "internal command, assuming AC_ERR_OTHER\n"); + qc->err_mask |= AC_ERR_OTHER; + } + + /* finish up */ + spin_lock_irqsave(ap->lock, flags); + + *tf = qc->result_tf; err_mask = qc->err_mask; ata_qc_free(qc); + ap->active_tag = preempted_tag; + ap->sactive = preempted_sactive; + ap->qc_active = preempted_qc_active; /* XXX - Some LLDDs (sata_mv) disable port on command failure. * Until those drivers are fixed, we detect the condition @@ -1033,11 +1121,13 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, * * Kill the following code as soon as those drivers are fixed. */ - if (ap->flags & ATA_FLAG_PORT_DISABLED) { + if (ap->flags & ATA_FLAG_DISABLED) { err_mask |= AC_ERR_SYSTEM; ata_port_probe(ap); } + spin_unlock_irqrestore(ap->lock, flags); + return err_mask; } @@ -1076,11 +1166,10 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) /** * ata_dev_read_id - Read ID data from the specified device - * @ap: port on which target device resides * @dev: target device * @p_class: pointer to class of the target device (may be changed) * @post_reset: is this read ID post-reset? - * @p_id: read IDENTIFY page (newly allocated) + * @id: buffer to read IDENTIFY data into * * Read ID data from the specified device. ATA_CMD_ID_ATA is * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI @@ -1093,29 +1182,24 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * RETURNS: * 0 on success, -errno otherwise. */ -static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, - unsigned int *p_class, int post_reset, u16 **p_id) +int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id) { + struct ata_port *ap = dev->ap; unsigned int class = *p_class; struct ata_taskfile tf; unsigned int err_mask = 0; - u16 *id; const char *reason; int rc; - DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); + if (ata_msg_ctl(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL); - if (id == NULL) { - rc = -ENOMEM; - reason = "out of memory"; - goto err_out; - } - retry: - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); switch (class) { case ATA_DEV_ATA: @@ -1132,7 +1216,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, tf.protocol = ATA_PROT_PIO; - err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { rc = -EIO; @@ -1159,7 +1243,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, * Some drives were very specific about that exact sequence. */ if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { - err_mask = ata_dev_init_params(ap, dev, id[3], id[6]); + err_mask = ata_dev_init_params(dev, id[3], id[6]); if (err_mask) { rc = -EIO; reason = "INIT_DEV_PARAMS failed"; @@ -1175,25 +1259,45 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, } *p_class = class; - *p_id = id; + return 0; err_out: - printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", - ap->id, dev->devno, reason); - kfree(id); + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " + "(%s, err_mask=0x%x)\n", reason, err_mask); return rc; } -static inline u8 ata_dev_knobble(const struct ata_port *ap, - struct ata_device *dev) +static inline u8 ata_dev_knobble(struct ata_device *dev) { - return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); + return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); +} + +static void ata_dev_config_ncq(struct ata_device *dev, + char *desc, size_t desc_sz) +{ + struct ata_port *ap = dev->ap; + int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); + + if (!ata_id_has_ncq(dev->id)) { + desc[0] = '\0'; + return; + } + + if (ap->flags & ATA_FLAG_NCQ) { + hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); + dev->flags |= ATA_DFLAG_NCQ; + } + + if (hdepth >= ddepth) + snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); + else + snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); } /** * ata_dev_configure - Configure the specified ATA/ATAPI device - * @ap: Port on which target device resides * @dev: Target device to configure * @print_info: Enable device info printout * @@ -1206,30 +1310,33 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap, * RETURNS: * 0 on success, -errno otherwise */ -static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, - int print_info) +int ata_dev_configure(struct ata_device *dev, int print_info) { + struct ata_port *ap = dev->ap; const u16 *id = dev->id; unsigned int xfer_mask; int i, rc; - if (!ata_dev_present(dev)) { - DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", - ap->id, dev->devno); + if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { + ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", + __FUNCTION__, ap->id, dev->devno); return 0; } - DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); /* print device capabilities */ - if (print_info) - printk(KERN_DEBUG "ata%u: dev %u cfg 49:%04x 82:%04x 83:%04x " - "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", - ap->id, dev->devno, id[49], id[82], id[83], - id[84], id[85], id[86], id[87], id[88]); + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: cfg 49:%04x 82:%04x 83:%04x " + "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", + __FUNCTION__, + id[49], id[82], id[83], id[84], + id[85], id[86], id[87], id[88]); /* initialize to-be-configured parameters */ - dev->flags = 0; + dev->flags &= ~ATA_DFLAG_CFG_MASK; dev->max_sectors = 0; dev->cdb_len = 0; dev->n_sectors = 0; @@ -1244,7 +1351,8 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, /* find max transfer mode; for printk only */ xfer_mask = ata_id_xfermask(id); - ata_dump_id(id); + if (ata_msg_probe(ap)) + ata_dump_id(id); /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { @@ -1252,6 +1360,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, if (ata_id_has_lba(id)) { const char *lba_desc; + char ncq_desc[20]; lba_desc = "LBA"; dev->flags |= ATA_DFLAG_LBA; @@ -1260,15 +1369,17 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, lba_desc = "LBA48"; } + /* config NCQ */ + ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); + /* print device info to dmesg */ - if (print_info) - printk(KERN_INFO "ata%u: dev %u ATA-%d, " - "max %s, %Lu sectors: %s\n", - ap->id, dev->devno, - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - lba_desc); + if (ata_msg_info(ap)) + ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + "max %s, %Lu sectors: %s %s\n", + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + lba_desc, ncq_desc); } else { /* CHS */ @@ -1285,14 +1396,20 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, } /* print device info to dmesg */ - if (print_info) - printk(KERN_INFO "ata%u: dev %u ATA-%d, " - "max %s, %Lu sectors: CHS %u/%u/%u\n", - ap->id, dev->devno, - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - dev->cylinders, dev->heads, dev->sectors); + if (ata_msg_info(ap)) + ata_dev_printk(dev, KERN_INFO, "ATA-%d, " + "max %s, %Lu sectors: CHS %u/%u/%u\n", + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + dev->cylinders, dev->heads, dev->sectors); + } + + if (dev->id[59] & 0x100) { + dev->multi_count = dev->id[59] & 0xff; + if (ata_msg_info(ap)) + ata_dev_printk(dev, KERN_INFO, "ata%u: dev %u multi count %u\n", + ap->id, dev->devno, dev->multi_count); } dev->cdb_len = 16; @@ -1300,18 +1417,28 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, /* ATAPI-specific feature tests */ else if (dev->class == ATA_DEV_ATAPI) { + char *cdb_intr_string = ""; + rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { - printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "unsupported CDB len\n"); rc = -EINVAL; goto err_out_nosup; } dev->cdb_len = (unsigned int) rc; + if (ata_id_cdb_intr(dev->id)) { + dev->flags |= ATA_DFLAG_CDB_INTR; + cdb_intr_string = ", CDB intr"; + } + /* print device info to dmesg */ - if (print_info) - printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, dev->devno, ata_mode_string(xfer_mask)); + if (ata_msg_info(ap)) + ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", + ata_mode_string(xfer_mask), + cdb_intr_string); } ap->host->max_cmd_len = 0; @@ -1321,10 +1448,10 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, ap->device[i].cdb_len); /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(ap, dev)) { - if (print_info) - printk(KERN_INFO "ata%u(%u): applying bridge limits\n", - ap->id, dev->devno); + if (ata_dev_knobble(dev)) { + if (ata_msg_info(ap)) + ata_dev_printk(dev, KERN_INFO, + "applying bridge limits\n"); dev->udma_mask &= ATA_UDMA5; dev->max_sectors = ATA_MAX_SECTORS; } @@ -1332,11 +1459,15 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, if (ap->ops->dev_config) ap->ops->dev_config(ap, dev); - DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", + __FUNCTION__, ata_chk_status(ap)); return 0; err_out_nosup: - DPRINTK("EXIT, err\n"); + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: EXIT, err\n", __FUNCTION__); return rc; } @@ -1352,79 +1483,104 @@ err_out_nosup: * PCI/etc. bus probe sem. * * RETURNS: - * Zero on success, non-zero on error. + * Zero on success, negative errno otherwise. */ static int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; - unsigned int i, rc, found = 0; + int tries[ATA_MAX_DEVICES]; + int i, rc, down_xfermask; + struct ata_device *dev; ata_port_probe(ap); - /* reset and determine device classes */ for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; + tries[i] = ATA_PROBE_MAX_TRIES; - if (ap->ops->probe_reset) { - rc = ap->ops->probe_reset(ap, classes); - if (rc) { - printk("ata%u: reset failed (errno=%d)\n", ap->id, rc); - return rc; - } - } else { - ap->ops->phy_reset(ap); + retry: + down_xfermask = 0; - if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ap->device[i].class; + /* reset and determine device classes */ + ap->ops->phy_reset(ap); - ata_port_probe(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (!(ap->flags & ATA_FLAG_DISABLED) && + dev->class != ATA_DEV_UNKNOWN) + classes[dev->devno] = dev->class; + else + classes[dev->devno] = ATA_DEV_NONE; + + dev->class = ATA_DEV_UNKNOWN; } + ata_port_probe(ap); + + /* after the reset the device state is PIO 0 and the controller + state is undefined. Record the mode */ + for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; + ap->device[i].pio_mode = XFER_PIO_0; /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + dev = &ap->device[i]; - dev->class = classes[i]; + if (tries[i]) + dev->class = classes[i]; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) continue; - WARN_ON(dev->id != NULL); - if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) { - dev->class = ATA_DEV_NONE; - continue; - } + rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); + if (rc) + goto fail; - if (ata_dev_configure(ap, dev, 1)) { - ata_dev_disable(ap, dev); - continue; - } - - found = 1; + rc = ata_dev_configure(dev, 1); + if (rc) + goto fail; } - if (!found) - goto err_out_disable; + /* configure transfer mode */ + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto fail; + } - if (ap->ops->set_mode) - ap->ops->set_mode(ap); - else - ata_set_mode(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) + return 0; - if (ap->flags & ATA_FLAG_PORT_DISABLED) - goto err_out_disable; - - return 0; - -err_out_disable: + /* no device present, disable port */ + ata_port_disable(ap); ap->ops->port_disable(ap); - return -1; + return -ENODEV; + + fail: + switch (rc) { + case -EINVAL: + case -ENODEV: + tries[dev->devno] = 0; + break; + case -EIO: + sata_down_spd_limit(ap); + /* fall through */ + default: + tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) + tries[dev->devno] = 0; + } + + if (!tries[dev->devno]) { + ata_down_xfermask_limit(dev, 1); + ata_dev_disable(dev); + } + + goto retry; } /** @@ -1440,7 +1596,7 @@ err_out_disable: void ata_port_probe(struct ata_port *ap) { - ap->flags &= ~ATA_FLAG_PORT_DISABLED; + ap->flags &= ~ATA_FLAG_DISABLED; } /** @@ -1454,27 +1610,21 @@ void ata_port_probe(struct ata_port *ap) */ static void sata_print_link_status(struct ata_port *ap) { - u32 sstatus, tmp; - const char *speed; + u32 sstatus, scontrol, tmp; - if (!ap->ops->scr_read) + if (sata_scr_read(ap, SCR_STATUS, &sstatus)) return; + sata_scr_read(ap, SCR_CONTROL, &scontrol); - sstatus = scr_read(ap, SCR_STATUS); - - if (sata_dev_present(ap)) { + if (ata_port_online(ap)) { tmp = (sstatus >> 4) & 0xf; - if (tmp & (1 << 0)) - speed = "1.5"; - else if (tmp & (1 << 1)) - speed = "3.0"; - else - speed = ""; - printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", - ap->id, speed, sstatus); + ata_port_printk(ap, KERN_INFO, + "SATA link up %s (SStatus %X SControl %X)\n", + sata_spd_string(tmp), sstatus, scontrol); } else { - printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", - ap->id, sstatus); + ata_port_printk(ap, KERN_INFO, + "SATA link down (SStatus %X SControl %X)\n", + sstatus, scontrol); } } @@ -1497,17 +1647,18 @@ void __sata_phy_reset(struct ata_port *ap) if (ap->flags & ATA_FLAG_SATA_RESET) { /* issue phy wake/reset */ - scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(ap, SCR_CONTROL, 0x301); /* Couldn't find anything in SATA I/II specs, but * AHCI-1.1 10.4.2 says at least 1 ms. */ mdelay(1); } - scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */ + /* phy wake/clear reset */ + sata_scr_write_flush(ap, SCR_CONTROL, 0x300); /* wait for phy to become ready, if necessary */ do { msleep(200); - sstatus = scr_read(ap, SCR_STATUS); + sata_scr_read(ap, SCR_STATUS, &sstatus); if ((sstatus & 0xf) != 1) break; } while (time_before(jiffies, timeout)); @@ -1516,12 +1667,12 @@ void __sata_phy_reset(struct ata_port *ap) sata_print_link_status(ap); /* TODO: phy layer with polling, timeouts, etc. */ - if (sata_dev_present(ap)) + if (!ata_port_offline(ap)) ata_port_probe(ap); else ata_port_disable(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) + if (ap->flags & ATA_FLAG_DISABLED) return; if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { @@ -1546,24 +1697,24 @@ void __sata_phy_reset(struct ata_port *ap) void sata_phy_reset(struct ata_port *ap) { __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) + if (ap->flags & ATA_FLAG_DISABLED) return; ata_bus_reset(ap); } /** * ata_dev_pair - return other device on cable - * @ap: port * @adev: device * * Obtain the other device on the same cable, or if none is * present NULL is returned */ -struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev) +struct ata_device *ata_dev_pair(struct ata_device *adev) { + struct ata_port *ap = adev->ap; struct ata_device *pair = &ap->device[1 - adev->devno]; - if (!ata_dev_present(pair)) + if (!ata_dev_enabled(pair)) return NULL; return pair; } @@ -1585,7 +1736,122 @@ void ata_port_disable(struct ata_port *ap) { ap->device[0].class = ATA_DEV_NONE; ap->device[1].class = ATA_DEV_NONE; - ap->flags |= ATA_FLAG_PORT_DISABLED; + ap->flags |= ATA_FLAG_DISABLED; +} + +/** + * sata_down_spd_limit - adjust SATA spd limit downward + * @ap: Port to adjust SATA spd limit for + * + * Adjust SATA spd limit of @ap downward. Note that this + * function only adjusts the limit. The change must be applied + * using sata_set_spd(). + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int sata_down_spd_limit(struct ata_port *ap) +{ + u32 sstatus, spd, mask; + int rc, highbit; + + rc = sata_scr_read(ap, SCR_STATUS, &sstatus); + if (rc) + return rc; + + mask = ap->sata_spd_limit; + if (mask <= 1) + return -EINVAL; + highbit = fls(mask) - 1; + mask &= ~(1 << highbit); + + spd = (sstatus >> 4) & 0xf; + if (spd <= 1) + return -EINVAL; + spd--; + mask &= (1 << spd) - 1; + if (!mask) + return -EINVAL; + + ap->sata_spd_limit = mask; + + ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", + sata_spd_string(fls(mask))); + + return 0; +} + +static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) +{ + u32 spd, limit; + + if (ap->sata_spd_limit == UINT_MAX) + limit = 0; + else + limit = fls(ap->sata_spd_limit); + + spd = (*scontrol >> 4) & 0xf; + *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); + + return spd != limit; +} + +/** + * sata_set_spd_needed - is SATA spd configuration needed + * @ap: Port in question + * + * Test whether the spd limit in SControl matches + * @ap->sata_spd_limit. This function is used to determine + * whether hardreset is necessary to apply SATA spd + * configuration. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if SATA spd configuration is needed, 0 otherwise. + */ +int sata_set_spd_needed(struct ata_port *ap) +{ + u32 scontrol; + + if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) + return 0; + + return __sata_set_spd_needed(ap, &scontrol); +} + +/** + * sata_set_spd - set SATA spd according to spd limit + * @ap: Port to set SATA spd for + * + * Set SATA spd of @ap according to sata_spd_limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 if spd doesn't need to be changed, 1 if spd has been + * changed. Negative errno if SCR registers are inaccessible. + */ +int sata_set_spd(struct ata_port *ap) +{ + u32 scontrol; + int rc; + + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + if (!__sata_set_spd_needed(ap, &scontrol)) + return 0; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + return 1; } /* @@ -1736,52 +2002,149 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } -static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) +/** + * ata_down_xfermask_limit - adjust dev xfer masks downward + * @dev: Device to adjust xfer masks + * @force_pio0: Force PIO0 + * + * Adjust xfer masks of @dev downward. Note that this function + * does not apply the change. Invoking ata_set_mode() afterwards + * will apply the limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) +{ + unsigned long xfer_mask; + int highbit; + + xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, + dev->udma_mask); + + if (!xfer_mask) + goto fail; + /* don't gear down to MWDMA from UDMA, go directly to PIO */ + if (xfer_mask & ATA_MASK_UDMA) + xfer_mask &= ~ATA_MASK_MWDMA; + + highbit = fls(xfer_mask) - 1; + xfer_mask &= ~(1 << highbit); + if (force_pio0) + xfer_mask &= 1 << ATA_SHIFT_PIO; + if (!xfer_mask) + goto fail; + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, + &dev->udma_mask); + + ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", + ata_mode_string(xfer_mask)); + + return 0; + + fail: + return -EINVAL; +} + +static int ata_dev_set_mode(struct ata_device *dev) { unsigned int err_mask; int rc; + dev->flags &= ~ATA_DFLAG_PIO; if (dev->xfer_shift == ATA_SHIFT_PIO) dev->flags |= ATA_DFLAG_PIO; - err_mask = ata_dev_set_xfermode(ap, dev); + err_mask = ata_dev_set_xfermode(dev); if (err_mask) { - printk(KERN_ERR - "ata%u: failed to set xfermode (err_mask=0x%x)\n", - ap->id, err_mask); + ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " + "(err_mask=0x%x)\n", err_mask); return -EIO; } - rc = ata_dev_revalidate(ap, dev, 0); - if (rc) { - printk(KERN_ERR - "ata%u: failed to revalidate after set xfermode\n", - ap->id); + rc = ata_dev_revalidate(dev, 0); + if (rc) return rc; - } DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", dev->xfer_shift, (int)dev->xfer_mode); - printk(KERN_INFO "ata%u: dev %u configured for %s\n", - ap->id, dev->devno, - ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); return 0; } -static int ata_host_set_pio(struct ata_port *ap) +/** + * ata_set_mode - Program timings and issue SET FEATURES - XFER + * @ap: port on which timings will be programmed + * @r_failed_dev: out paramter for failed device + * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) { - int i; + struct ata_device *dev; + int i, rc = 0, used_dma = 0, found = 0; + /* has private set_mode? */ + if (ap->ops->set_mode) { + /* FIXME: make ->set_mode handle no device case and + * return error code and failing device on failure. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (ata_dev_enabled(&ap->device[i])) { + ap->ops->set_mode(ap); + break; + } + } + return 0; + } + + /* step 1: calculate xfer_mask */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + unsigned int pio_mask, dma_mask; - if (!ata_dev_present(dev)) + dev = &ap->device[i]; + + if (!ata_dev_enabled(dev)) + continue; + + ata_dev_xfermask(dev); + + pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); + dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); + dev->pio_mode = ata_xfer_mask2mode(pio_mask); + dev->dma_mode = ata_xfer_mask2mode(dma_mask); + + found = 1; + if (dev->dma_mode) + used_dma = 1; + } + if (!found) + goto out; + + /* step 2: always set host PIO timings */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) continue; if (!dev->pio_mode) { - printk(KERN_WARNING "ata%u: no PIO support for device %d.\n", ap->id, i); - return -1; + ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); + rc = -EINVAL; + goto out; } dev->xfer_mode = dev->pio_mode; @@ -1790,17 +2153,11 @@ static int ata_host_set_pio(struct ata_port *ap) ap->ops->set_piomode(ap, dev); } - return 0; -} - -static void ata_host_set_dma(struct ata_port *ap) -{ - int i; - + /* step 3: set host DMA timings */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + dev = &ap->device[i]; - if (!ata_dev_present(dev) || !dev->dma_mode) + if (!ata_dev_enabled(dev) || !dev->dma_mode) continue; dev->xfer_mode = dev->dma_mode; @@ -1808,79 +2165,33 @@ static void ata_host_set_dma(struct ata_port *ap) if (ap->ops->set_dmamode) ap->ops->set_dmamode(ap, dev); } -} - -/** - * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @ap: port on which timings will be programmed - * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). - * - * LOCKING: - * PCI/etc. bus probe sem. - */ -static void ata_set_mode(struct ata_port *ap) -{ - int i, rc, used_dma = 0; - - /* step 1: calculate xfer_mask */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - unsigned int pio_mask, dma_mask; - - if (!ata_dev_present(dev)) - continue; - - ata_dev_xfermask(ap, dev); - - /* TODO: let LLDD filter dev->*_mask here */ - - pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); - dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); - dev->pio_mode = ata_xfer_mask2mode(pio_mask); - dev->dma_mode = ata_xfer_mask2mode(dma_mask); - - if (dev->dma_mode) - used_dma = 1; - } - - /* step 2: always set host PIO timings */ - rc = ata_host_set_pio(ap); - if (rc) - goto err_out; - - /* step 3: set host DMA timings */ - ata_host_set_dma(ap); /* step 4: update devices' xfer mode */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + dev = &ap->device[i]; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) continue; - if (ata_dev_set_mode(ap, dev)) - goto err_out; + rc = ata_dev_set_mode(dev); + if (rc) + goto out; } - /* - * Record simplex status. If we selected DMA then the other - * host channels are not permitted to do so. + /* Record simplex status. If we selected DMA then the other + * host channels are not permitted to do so. */ - if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) ap->host_set->simplex_claimed = 1; - /* - * Chip specific finalisation - */ + /* step5: chip specific finalisation */ if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - return; - -err_out: - ata_port_disable(ap); + out: + if (rc) + *r_failed_dev = dev; + return rc; } /** @@ -1930,8 +2241,8 @@ unsigned int ata_busy_sleep (struct ata_port *ap, } if (status & ATA_BUSY) - printk(KERN_WARNING "ata%u is slow to respond, " - "please be patient\n", ap->id); + ata_port_printk(ap, KERN_WARNING, + "port is slow to respond, please be patient\n"); timeout = timer_start + tmout; while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { @@ -1940,8 +2251,8 @@ unsigned int ata_busy_sleep (struct ata_port *ap, } if (status & ATA_BUSY) { - printk(KERN_ERR "ata%u failed to respond (%lu secs)\n", - ap->id, tmout / HZ); + ata_port_printk(ap, KERN_ERR, "port failed to respond " + "(%lu secs)\n", tmout / HZ); return 1; } @@ -2033,8 +2344,10 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the bus shows 0xFF because the odd clown forgets the D7 * pulldown resistor. */ - if (ata_check_status(ap) == 0xFF) + if (ata_check_status(ap) == 0xFF) { + ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); return AC_ERR_OTHER; + } ata_bus_post_reset(ap, devmask); @@ -2058,7 +2371,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * Obtains host_set lock. * * SIDE EFFECTS: - * Sets ATA_FLAG_PORT_DISABLED if bus reset fails. + * Sets ATA_FLAG_DISABLED if bus reset fails. */ void ata_bus_reset(struct ata_port *ap) @@ -2126,60 +2439,139 @@ void ata_bus_reset(struct ata_port *ap) return; err_out: - printk(KERN_ERR "ata%u: disabling port\n", ap->id); + ata_port_printk(ap, KERN_ERR, "disabling port\n"); ap->ops->port_disable(ap); DPRINTK("EXIT\n"); } -static int sata_phy_resume(struct ata_port *ap) -{ - unsigned long timeout = jiffies + (HZ * 5); - u32 sstatus; - - scr_write_flush(ap, SCR_CONTROL, 0x300); - - /* Wait for phy to become ready, if necessary. */ - do { - msleep(200); - sstatus = scr_read(ap, SCR_STATUS); - if ((sstatus & 0xf) != 1) - return 0; - } while (time_before(jiffies, timeout)); - - return -1; -} - /** - * ata_std_probeinit - initialize probing - * @ap: port to be probed + * sata_phy_debounce - debounce SATA phy status + * @ap: ATA port to debounce SATA phy status for + * @params: timing parameters { interval, duratinon, timeout } in msec * - * @ap is about to be probed. Initialize it. This function is - * to be used as standard callback for ata_drive_probe_reset(). + * Make sure SStatus of @ap reaches stable state, determined by + * holding the same value where DET is not 1 for @duration polled + * every @interval, before @timeout. Timeout constraints the + * beginning of the stable state. Because, after hot unplugging, + * DET gets stuck at 1 on some controllers, this functions waits + * until timeout then returns 0 if DET is stable at 1. * - * NOTE!!! Do not use this function as probeinit if a low level - * driver implements only hardreset. Just pass NULL as probeinit - * in that case. Using this function is probably okay but doing - * so makes reset sequence different from the original - * ->phy_reset implementation and Jeff nervous. :-P + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. */ -void ata_std_probeinit(struct ata_port *ap) +int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) { - if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) { - sata_phy_resume(ap); - if (sata_dev_present(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + unsigned long interval_msec = params[0]; + unsigned long duration = params[1] * HZ / 1000; + unsigned long timeout = jiffies + params[2] * HZ / 1000; + unsigned long last_jiffies; + u32 last, cur; + int rc; + + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + last = cur; + last_jiffies = jiffies; + + while (1) { + msleep(interval_msec); + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + /* DET stable? */ + if (cur == last) { + if (cur == 1 && time_before(jiffies, timeout)) + continue; + if (time_after(jiffies, last_jiffies + duration)) + return 0; + continue; + } + + /* unstable, start over */ + last = cur; + last_jiffies = jiffies; + + /* check timeout */ + if (time_after(jiffies, timeout)) + return -EBUSY; } } /** - * ata_std_softreset - reset host port via ATA SRST - * @ap: port to reset - * @verbose: fail verbosely - * @classes: resulting classes of attached devices + * sata_phy_resume - resume SATA phy + * @ap: ATA port to resume SATA phy for + * @params: timing parameters { interval, duratinon, timeout } in msec * - * Reset host port using ATA SRST. This function is to be used - * as standard callback for ata_drive_*_reset() functions. + * Resume SATA phy of @ap and debounce it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_phy_resume(struct ata_port *ap, const unsigned long *params) +{ + u32 scontrol; + int rc; + + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x300; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + /* Some PHYs react badly if SStatus is pounded immediately + * after resuming. Delay 200ms before debouncing. + */ + msleep(200); + + return sata_phy_debounce(ap, params); +} + +static void ata_wait_spinup(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned long end, secs; + int rc; + + /* first, debounce phy if SATA */ + if (ap->cbl == ATA_CBL_SATA) { + rc = sata_phy_debounce(ap, sata_deb_timing_eh); + + /* if debounced successfully and offline, no need to wait */ + if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) + return; + } + + /* okay, let's give the drive time to spin up */ + end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; + secs = ((end - jiffies) + HZ - 1) / HZ; + + if (time_after(jiffies, end)) + return; + + if (secs > 5) + ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " + "(%lu secs)\n", secs); + + schedule_timeout_uninterruptible(end - jiffies); +} + +/** + * ata_std_prereset - prepare for reset + * @ap: ATA port to be reset + * + * @ap is about to be reset. Initialize it. * * LOCKING: * Kernel thread context (may sleep) @@ -2187,7 +2579,63 @@ void ata_std_probeinit(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) +int ata_std_prereset(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing; + int rc; + + /* hotplug? */ + if (ehc->i.flags & ATA_EHI_HOTPLUGGED) { + if (ap->flags & ATA_FLAG_HRST_TO_RESUME) + ehc->i.action |= ATA_EH_HARDRESET; + if (ap->flags & ATA_FLAG_SKIP_D2H_BSY) + ata_wait_spinup(ap); + } + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* if SATA, resume phy */ + if (ap->cbl == ATA_CBL_SATA) { + if (ap->flags & ATA_FLAG_LOADING) + timing = sata_deb_timing_boot; + else + timing = sata_deb_timing_eh; + + rc = sata_phy_resume(ap, timing); + if (rc && rc != -EOPNOTSUPP) { + /* phy resume failed */ + ata_port_printk(ap, KERN_WARNING, "failed to resume " + "link for reset (errno=%d)\n", rc); + return rc; + } + } + + /* Wait for !BSY if the controller can wait for the first D2H + * Reg FIS and we don't know that no device is attached. + */ + if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + return 0; +} + +/** + * ata_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Reset host port using ATA SRST. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_softreset(struct ata_port *ap, unsigned int *classes) { unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; unsigned int devmask = 0, err_mask; @@ -2195,7 +2643,7 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) DPRINTK("ENTER\n"); - if (ap->ops->scr_read && !sata_dev_present(ap)) { + if (ata_port_offline(ap)) { classes[0] = ATA_DEV_NONE; goto out; } @@ -2213,11 +2661,7 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) DPRINTK("about to softreset, devmask=%x\n", devmask); err_mask = ata_bus_softreset(ap, devmask); if (err_mask) { - if (verbose) - printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n", - ap->id, err_mask); - else - DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n", + ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", err_mask); return -EIO; } @@ -2235,12 +2679,9 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) /** * sata_std_hardreset - reset host port via SATA phy reset * @ap: port to reset - * @verbose: fail verbosely * @class: resulting class of attached device * * SATA phy-reset host port using DET bits of SControl register. - * This function is to be used as standard callback for - * ata_drive_*_reset(). * * LOCKING: * Kernel thread context (may sleep) @@ -2248,35 +2689,57 @@ int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) * RETURNS: * 0 on success, -errno otherwise. */ -int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) +int sata_std_hardreset(struct ata_port *ap, unsigned int *class) { + u32 scontrol; + int rc; + DPRINTK("ENTER\n"); - /* Issue phy wake/reset */ - scr_write_flush(ap, SCR_CONTROL, 0x301); + if (sata_set_spd_needed(ap)) { + /* SATA spec says nothing about how to reconfigure + * spd. To be on the safe side, turn off phy during + * reconfiguration. This works for at least ICH7 AHCI + * and Sil3124. + */ + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; - /* - * Couldn't find anything in SATA I/II specs, but AHCI-1.1 + scontrol = (scontrol & 0x0f0) | 0x302; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + sata_set_spd(ap); + } + + /* issue phy wake/reset */ + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x301; + + if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) + return rc; + + /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. */ msleep(1); - /* Bring phy back */ - sata_phy_resume(ap); + /* bring phy back */ + sata_phy_resume(ap, sata_deb_timing_eh); /* TODO: phy layer with polling, timeouts, etc. */ - if (!sata_dev_present(ap)) { + if (ata_port_offline(ap)) { *class = ATA_DEV_NONE; DPRINTK("EXIT, link offline\n"); return 0; } if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - if (verbose) - printk(KERN_ERR "ata%u: COMRESET failed " - "(device not ready)\n", ap->id); - else - DPRINTK("EXIT, device not ready\n"); + ata_port_printk(ap, KERN_ERR, + "COMRESET failed (device not ready)\n"); return -EIO; } @@ -2297,27 +2760,28 @@ int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) * the device might have been reset more than once using * different reset methods before postreset is invoked. * - * This function is to be used as standard callback for - * ata_drive_*_reset(). - * * LOCKING: * Kernel thread context (may sleep) */ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) { + u32 serror; + DPRINTK("ENTER\n"); - /* set cable type if it isn't already set */ - if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA) - ap->cbl = ATA_CBL_SATA; - /* print link status */ - if (ap->cbl == ATA_CBL_SATA) - sata_print_link_status(ap); + sata_print_link_status(ap); + + /* clear SError */ + if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) + sata_scr_write(ap, SCR_ERROR, serror); /* re-enable interrupts */ - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); + if (!ap->ops->error_handler) { + /* FIXME: hack. create a hook instead */ + if (ap->ioaddr.ctl_addr) + ata_irq_on(ap); + } /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) @@ -2342,127 +2806,8 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) DPRINTK("EXIT\n"); } -/** - * ata_std_probe_reset - standard probe reset method - * @ap: prot to perform probe-reset - * @classes: resulting classes of attached devices - * - * The stock off-the-shelf ->probe_reset method. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - ata_reset_fn_t hardreset; - - hardreset = NULL; - if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) - hardreset = sata_std_hardreset; - - return ata_drive_probe_reset(ap, ata_std_probeinit, - ata_std_softreset, hardreset, - ata_std_postreset, classes); -} - -static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, - ata_postreset_fn_t postreset, - unsigned int *classes) -{ - int i, rc; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; - - rc = reset(ap, 0, classes); - if (rc) - return rc; - - /* If any class isn't ATA_DEV_UNKNOWN, consider classification - * is complete and convert all ATA_DEV_UNKNOWN to - * ATA_DEV_NONE. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] != ATA_DEV_UNKNOWN) - break; - - if (i < ATA_MAX_DEVICES) - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; - - if (postreset) - postreset(ap, classes); - - return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV; -} - -/** - * ata_drive_probe_reset - Perform probe reset with given methods - * @ap: port to reset - * @probeinit: probeinit method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * @classes: resulting classes of attached devices - * - * Reset the specified port and classify attached devices using - * given methods. This function prefers softreset but tries all - * possible reset sequences to reset and classify devices. This - * function is intended to be used for constructing ->probe_reset - * callback by low level drivers. - * - * Reset methods should follow the following rules. - * - * - Return 0 on sucess, -errno on failure. - * - If classification is supported, fill classes[] with - * recognized class codes. - * - If classification is not supported, leave classes[] alone. - * - If verbose is non-zero, print error message on failure; - * otherwise, shut up. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV - * if classification fails, and any error code from reset - * methods. - */ -int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset, unsigned int *classes) -{ - int rc = -EINVAL; - - if (probeinit) - probeinit(ap); - - if (softreset) { - rc = do_probe_reset(ap, softreset, postreset, classes); - if (rc == 0) - return 0; - } - - if (!hardreset) - return rc; - - rc = do_probe_reset(ap, hardreset, postreset, classes); - if (rc == 0 || rc != -ENODEV) - return rc; - - if (softreset) - rc = do_probe_reset(ap, softreset, postreset, classes); - - return rc; -} - /** * ata_dev_same_device - Determine whether new ID matches configured device - * @ap: port on which the device to compare against resides * @dev: device to compare against * @new_class: class of the new device * @new_id: IDENTIFY page of the new device @@ -2477,17 +2822,16 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, * RETURNS: * 1 if @dev matches @new_class and @new_id, 0 otherwise. */ -static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, - unsigned int new_class, const u16 *new_id) +static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, + const u16 *new_id) { const u16 *old_id = dev->id; unsigned char model[2][41], serial[2][21]; u64 new_n_sectors; if (dev->class != new_class) { - printk(KERN_INFO - "ata%u: dev %u class mismatch %d != %d\n", - ap->id, dev->devno, dev->class, new_class); + ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", + dev->class, new_class); return 0; } @@ -2498,24 +2842,22 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, new_n_sectors = ata_id_n_sectors(new_id); if (strcmp(model[0], model[1])) { - printk(KERN_INFO - "ata%u: dev %u model number mismatch '%s' != '%s'\n", - ap->id, dev->devno, model[0], model[1]); + ata_dev_printk(dev, KERN_INFO, "model number mismatch " + "'%s' != '%s'\n", model[0], model[1]); return 0; } if (strcmp(serial[0], serial[1])) { - printk(KERN_INFO - "ata%u: dev %u serial number mismatch '%s' != '%s'\n", - ap->id, dev->devno, serial[0], serial[1]); + ata_dev_printk(dev, KERN_INFO, "serial number mismatch " + "'%s' != '%s'\n", serial[0], serial[1]); return 0; } if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { - printk(KERN_INFO - "ata%u: dev %u n_sectors mismatch %llu != %llu\n", - ap->id, dev->devno, (unsigned long long)dev->n_sectors, - (unsigned long long)new_n_sectors); + ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " + "%llu != %llu\n", + (unsigned long long)dev->n_sectors, + (unsigned long long)new_n_sectors); return 0; } @@ -2524,7 +2866,6 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, /** * ata_dev_revalidate - Revalidate ATA device - * @ap: port on which the device to revalidate resides * @dev: device to revalidate * @post_reset: is this revalidation after reset? * @@ -2537,40 +2878,37 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, * RETURNS: * 0 on success, negative errno otherwise */ -int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, - int post_reset) +int ata_dev_revalidate(struct ata_device *dev, int post_reset) { - unsigned int class; - u16 *id; + unsigned int class = dev->class; + u16 *id = (void *)dev->ap->sector_buf; int rc; - if (!ata_dev_present(dev)) - return -ENODEV; - - class = dev->class; - id = NULL; - - /* allocate & read ID data */ - rc = ata_dev_read_id(ap, dev, &class, post_reset, &id); - if (rc) - goto fail; - - /* is the device still there? */ - if (!ata_dev_same_device(ap, dev, class, id)) { + if (!ata_dev_enabled(dev)) { rc = -ENODEV; goto fail; } - kfree(dev->id); - dev->id = id; + /* read ID data */ + rc = ata_dev_read_id(dev, &class, post_reset, id); + if (rc) + goto fail; + + /* is the device still there? */ + if (!ata_dev_same_device(dev, class, id)) { + rc = -ENODEV; + goto fail; + } + + memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); /* configure device according to the new ID */ - return ata_dev_configure(ap, dev, 0); + rc = ata_dev_configure(dev, 0); + if (rc == 0) + return 0; fail: - printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n", - ap->id, dev->devno, rc); - kfree(id); + ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); return rc; } @@ -2626,6 +2964,14 @@ static int ata_dma_blacklisted(const struct ata_device *dev) unsigned int nlen, rlen; int i; + /* We don't support polling DMA. + * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) + * if the LLDD handles only interrupts in the HSM_ST_LAST state. + */ + if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && + (dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, @@ -2646,7 +2992,6 @@ static int ata_dma_blacklisted(const struct ata_device *dev) /** * ata_dev_xfermask - Compute supported xfermask of the given device - * @ap: Port on which the device to compute xfermask for resides * @dev: Device to compute xfermask for * * Compute supported xfermask of @dev and store it in @@ -2661,49 +3006,61 @@ static int ata_dma_blacklisted(const struct ata_device *dev) * LOCKING: * None. */ -static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) +static void ata_dev_xfermask(struct ata_device *dev) { + struct ata_port *ap = dev->ap; struct ata_host_set *hs = ap->host_set; unsigned long xfer_mask; int i; - xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, - ap->udma_mask); + xfer_mask = ata_pack_xfermask(ap->pio_mask, + ap->mwdma_mask, ap->udma_mask); + + /* Apply cable rule here. Don't apply it early because when + * we handle hot plug the cable type can itself change. + */ + if (ap->cbl == ATA_CBL_PATA40) + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); /* FIXME: Use port-wide xfermask for now */ for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *d = &ap->device[i]; - if (!ata_dev_present(d)) + + if (ata_dev_absent(d)) continue; - xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask, - d->udma_mask); + + if (ata_dev_disabled(d)) { + /* to avoid violating device selection timing */ + xfer_mask &= ata_pack_xfermask(d->pio_mask, + UINT_MAX, UINT_MAX); + continue; + } + + xfer_mask &= ata_pack_xfermask(d->pio_mask, + d->mwdma_mask, d->udma_mask); xfer_mask &= ata_id_xfermask(d->id); if (ata_dma_blacklisted(d)) xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - /* Apply cable rule here. Don't apply it early because when - we handle hot plug the cable type can itself change */ - if (ap->cbl == ATA_CBL_PATA40) - xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); } if (ata_dma_blacklisted(dev)) - printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, " - "disabling DMA\n", ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, + "device is on DMA blacklist, disabling DMA\n"); if (hs->flags & ATA_HOST_SIMPLEX) { if (hs->simplex_claimed) xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); } + if (ap->ops->mode_filter) xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, - &dev->udma_mask); + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, + &dev->mwdma_mask, &dev->udma_mask); } /** * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command - * @ap: Port associated with device @dev * @dev: Device to which command will be sent * * Issue SET FEATURES - XFER MODE command to device @dev @@ -2716,8 +3073,7 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_dev_set_xfermode(struct ata_port *ap, - struct ata_device *dev) +static unsigned int ata_dev_set_xfermode(struct ata_device *dev) { struct ata_taskfile tf; unsigned int err_mask; @@ -2725,14 +3081,14 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, /* set up set-features taskfile */ DPRINTK("set features - xfer mode\n"); - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); tf.command = ATA_CMD_SET_FEATURES; tf.feature = SETFEATURES_XFER; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; tf.nsect = dev->xfer_mode; - err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -2740,7 +3096,6 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, /** * ata_dev_init_params - Issue INIT DEV PARAMS command - * @ap: Port associated with device @dev * @dev: Device to which command will be sent * @heads: Number of heads (taskfile parameter) * @sectors: Number of sectors (taskfile parameter) @@ -2751,11 +3106,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ - -static unsigned int ata_dev_init_params(struct ata_port *ap, - struct ata_device *dev, - u16 heads, - u16 sectors) +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors) { struct ata_taskfile tf; unsigned int err_mask; @@ -2767,14 +3119,14 @@ static unsigned int ata_dev_init_params(struct ata_port *ap, /* set up init dev params taskfile */ DPRINTK("init dev params \n"); - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); tf.command = ATA_CMD_INIT_DEV_PARAMS; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -2957,6 +3309,7 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) qc->n_elem = 1; qc->orig_n_elem = 1; qc->buf_virt = buf; + qc->nbytes = buflen; sg = qc->__sg; sg_init_one(sg, buf, buflen); @@ -3139,134 +3492,6 @@ skip_map: return 0; } -/** - * ata_poll_qc_complete - turn irq back on and finish qc - * @qc: Command to complete - * @err_mask: ATA status register content - * - * LOCKING: - * None. (grabs host lock) - */ - -void ata_poll_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_irq_on(ap); - ata_qc_complete(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); -} - -/** - * ata_pio_poll - poll using PIO, depending on current state - * @ap: the target ata_port - * - * LOCKING: - * None. (executing in kernel thread context) - * - * RETURNS: - * timeout value to use - */ - -static unsigned long ata_pio_poll(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - u8 status; - unsigned int poll_state = HSM_ST_UNKNOWN; - unsigned int reg_state = HSM_ST_UNKNOWN; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - - switch (ap->hsm_task_state) { - case HSM_ST: - case HSM_ST_POLL: - poll_state = HSM_ST_POLL; - reg_state = HSM_ST; - break; - case HSM_ST_LAST: - case HSM_ST_LAST_POLL: - poll_state = HSM_ST_LAST_POLL; - reg_state = HSM_ST_LAST; - break; - default: - BUG(); - break; - } - - status = ata_chk_status(ap); - if (status & ATA_BUSY) { - if (time_after(jiffies, ap->pio_task_timeout)) { - qc->err_mask |= AC_ERR_TIMEOUT; - ap->hsm_task_state = HSM_ST_TMOUT; - return 0; - } - ap->hsm_task_state = poll_state; - return ATA_SHORT_PAUSE; - } - - ap->hsm_task_state = reg_state; - return 0; -} - -/** - * ata_pio_complete - check if drive is busy or idle - * @ap: the target ata_port - * - * LOCKING: - * None. (executing in kernel thread context) - * - * RETURNS: - * Non-zero if qc completed, zero otherwise. - */ - -static int ata_pio_complete (struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - u8 drv_stat; - - /* - * This is purely heuristic. This is a fast path. Sometimes when - * we enter, BSY will be cleared in a chk-status or two. If not, - * the drive is probably seeking or something. Snooze for a couple - * msecs, then chk-status again. If still busy, fall back to - * HSM_ST_POLL state. - */ - drv_stat = ata_busy_wait(ap, ATA_BUSY, 10); - if (drv_stat & ATA_BUSY) { - msleep(2); - drv_stat = ata_busy_wait(ap, ATA_BUSY, 10); - if (drv_stat & ATA_BUSY) { - ap->hsm_task_state = HSM_ST_LAST_POLL; - ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; - return 0; - } - } - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - - drv_stat = ata_wait_idle(ap); - if (!ata_ok(drv_stat)) { - qc->err_mask |= __ac_err_mask(drv_stat); - ap->hsm_task_state = HSM_ST_ERR; - return 0; - } - - ap->hsm_task_state = HSM_ST_IDLE; - - WARN_ON(qc->err_mask); - ata_poll_qc_complete(qc); - - /* another command may start at this point */ - - return 1; -} - - /** * swap_buf_le16 - swap halves of 16-bit words in place * @buf: Buffer to swap @@ -3291,7 +3516,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_mmio_data_xfer - Transfer data by MMIO - * @ap: port to read/write + * @adev: device for this I/O * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -3302,9 +3527,10 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * Inherited from caller. */ -static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, - unsigned int buflen, int write_data) +void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) { + struct ata_port *ap = adev->ap; unsigned int i; unsigned int words = buflen >> 1; u16 *buf16 = (u16 *) buf; @@ -3336,7 +3562,7 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, /** * ata_pio_data_xfer - Transfer data by PIO - * @ap: port to read/write + * @adev: device to target * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -3347,9 +3573,10 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, * Inherited from caller. */ -static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, - unsigned int buflen, int write_data) +void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) { + struct ata_port *ap = adev->ap; unsigned int words = buflen >> 1; /* Transfer multiple of 2 bytes */ @@ -3374,38 +3601,29 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, } /** - * ata_data_xfer - Transfer data from/to the data register. - * @ap: port to read/write + * ata_pio_data_xfer_noirq - Transfer data by PIO + * @adev: device to target * @buf: data buffer * @buflen: buffer length - * @do_write: read/write + * @write_data: read/write * - * Transfer data from/to the device data register. + * Transfer data from/to the device data register by PIO. Do the + * transfer with interrupts disabled. * * LOCKING: * Inherited from caller. */ -static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, - unsigned int buflen, int do_write) +void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) { - /* Make the crap hardware pay the costs not the good stuff */ - if (unlikely(ap->flags & ATA_FLAG_IRQ_MASK)) { - unsigned long flags; - local_irq_save(flags); - if (ap->flags & ATA_FLAG_MMIO) - ata_mmio_data_xfer(ap, buf, buflen, do_write); - else - ata_pio_data_xfer(ap, buf, buflen, do_write); - local_irq_restore(flags); - } else { - if (ap->flags & ATA_FLAG_MMIO) - ata_mmio_data_xfer(ap, buf, buflen, do_write); - else - ata_pio_data_xfer(ap, buf, buflen, do_write); - } + unsigned long flags; + local_irq_save(flags); + ata_pio_data_xfer(adev, buf, buflen, write_data); + local_irq_restore(flags); } + /** * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. * @qc: Command on going @@ -3435,7 +3653,24 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - buf = kmap(page) + offset; + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use a bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + } qc->cursect++; qc->cursg_ofs++; @@ -3444,14 +3679,68 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) qc->cursg++; qc->cursg_ofs = 0; } +} - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); +/** + * ata_pio_sectors - Transfer one or many 512-byte sectors. + * @qc: Command on going + * + * Transfer one or many ATA_SECT_SIZE of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ - /* do the actual data transfer */ - do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write); +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; - kunmap(page); + WARN_ON(qc->dev->multi_count == 0); + + nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); +} + +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ + +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + ap->hsm_task_state = HSM_ST; + break; + case ATA_PROT_ATAPI_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATA_PROT_ATAPI_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } } /** @@ -3492,11 +3781,11 @@ next_sg: unsigned int i; if (words) /* warning if bytes > 1 */ - printk(KERN_WARNING "ata%u: %u bytes trailing data\n", - ap->id, bytes); + ata_dev_printk(qc->dev, KERN_WARNING, + "%u bytes trailing data\n", bytes); for (i = 0; i < words; i++) - ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); + ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); ap->hsm_task_state = HSM_ST_LAST; return; @@ -3517,7 +3806,24 @@ next_sg: /* don't cross page boundaries */ count = min(count, (unsigned int)PAGE_SIZE - offset); - buf = kmap(page) + offset; + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + } bytes -= count; qc->curbytes += count; @@ -3528,13 +3834,6 @@ next_sg: qc->cursg_ofs = 0; } - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - /* do the actual data transfer */ - ata_data_xfer(ap, buf, count, do_write); - - kunmap(page); - if (bytes) goto next_sg; } @@ -3556,10 +3855,16 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) unsigned int ireason, bc_lo, bc_hi, bytes; int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; - ap->ops->tf_read(ap, &qc->tf); - ireason = qc->tf.nsect; - bc_lo = qc->tf.lbam; - bc_hi = qc->tf.lbah; + /* Abuse qc->result_tf for temp storage of intermediate TF + * here to save some kernel stack usage. + * For normal completion, qc->result_tf is not relevant. For + * error, qc->result_tf is later overwritten by ata_qc_complete(). + * So, the correctness of qc->result_tf is not affected. + */ + ap->ops->tf_read(ap, &qc->result_tf); + ireason = qc->result_tf.nsect; + bc_lo = qc->result_tf.lbam; + bc_hi = qc->result_tf.lbah; bytes = (bc_hi << 8) | bc_lo; /* shall be cleared to zero, indicating xfer of data */ @@ -3571,309 +3876,367 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (do_write != i_write) goto err_out; + VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); + __atapi_pio_bytes(qc, bytes); return; err_out: - printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; } /** - * ata_pio_block - start PIO on a block + * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. * @ap: the target ata_port + * @qc: qc on going * - * LOCKING: - * None. (executing in kernel thread context) + * RETURNS: + * 1 if ok in workqueue, 0 otherwise. */ -static void ata_pio_block(struct ata_port *ap) +static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) { - struct ata_queued_cmd *qc; + if (qc->tf.flags & ATA_TFLAG_POLLING) + return 1; + + if (ap->hsm_task_state == HSM_ST_FIRST) { + if (qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) + return 1; + + if (is_atapi_taskfile(&qc->tf) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + } + + return 0; +} + +/** + * ata_hsm_qc_complete - finish a qc running on standard HSM + * @qc: Command to complete + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * Finish @qc which is running on standard HSM. + * + * LOCKING: + * If @in_wq is zero, spin_lock_irqsave(host_set lock). + * Otherwise, none on entry and grabs host lock. + */ +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ap->ops->error_handler) { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + + /* EH might have kicked in while host_set lock + * is released. + */ + qc = ata_qc_from_tag(ap, qc->tag); + if (qc) { + if (likely(!(qc->err_mask & AC_ERR_HSM))) { + ata_irq_on(ap); + ata_qc_complete(qc); + } else + ata_port_freeze(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + } else { + if (likely(!(qc->err_mask & AC_ERR_HSM))) + ata_qc_complete(qc); + else + ata_port_freeze(ap); + } + } else { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + ata_irq_on(ap); + ata_qc_complete(qc); + spin_unlock_irqrestore(ap->lock, flags); + } else + ata_qc_complete(qc); + } + + ata_altstatus(ap); /* flush */ +} + +/** + * ata_hsm_move - move the HSM to the next state. + * @ap: the target ata_port + * @qc: qc on going + * @status: current device status + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * RETURNS: + * 1 when poll next status needed, 0 otherwise. + */ +int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) +{ + unsigned long flags = 0; + int poll_next; + + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + + /* Make sure ata_qc_issue_prot() does not throw things + * like DMA polling into the workqueue. Notice that + * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). + */ + WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); + +fsm_start: + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, ap->hsm_task_state, status); + + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Send first data block or PACKET CDB */ + + /* If polling, we will stay in the work queue after + * sending the data. Otherwise, interrupt handler + * takes over after sending the data. + */ + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + /* check device status */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + if (in_wq) + spin_lock_irqsave(ap->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (in_wq) + spin_unlock_irqrestore(ap->lock, flags); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATA_PROT_ATAPI) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* No more data to transfer or device error. + * Device error will be tagged in HSM_ST_LAST. + */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* For PIO reads, some devices may ask for + * data transfer (DRQ=1) alone with ERR=1. + * We respect DRQ here and transfer one + * block of junk data before changing the + * hsm_task_state to HSM_ST_ERR. + * + * For PIO writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* data might be corrputed */ + qc->err_mask |= AC_ERR_DEV; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + ata_pio_sectors(qc); + ata_altstatus(ap); + status = ata_wait_idle(ap); + } + + if (status & (ATA_BUSY | ATA_DRQ)) + qc->err_mask |= AC_ERR_HSM; + + /* ata_pio_sectors() might change the + * state to HSM_ST_LAST. so, the state + * is changed after ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + ata_altstatus(ap); + status = ata_wait_idle(ap); + goto fsm_start; + } + } + + ata_altstatus(ap); /* flush */ + poll_next = 1; + break; + + case HSM_ST_LAST: + if (unlikely(!ata_ok(status))) { + qc->err_mask |= __ac_err_mask(status); + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* no more data to transfer */ + DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", + ap->id, qc->dev->devno, status); + + WARN_ON(qc->err_mask); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + + case HSM_ST_ERR: + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + WARN_ON(qc->err_mask == 0); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + default: + poll_next = 0; + BUG(); + } + + return poll_next; +} + +static void ata_pio_task(void *_data) +{ + struct ata_queued_cmd *qc = _data; + struct ata_port *ap = qc->ap; u8 status; + int poll_next; + +fsm_start: + WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); /* * This is purely heuristic. This is a fast path. * Sometimes when we enter, BSY will be cleared in * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, fall back to - * HSM_ST_POLL state. + * chk-status again. If still busy, queue delayed work. */ status = ata_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ap->hsm_task_state = HSM_ST_POLL; - ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; + ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); return; } } - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); + /* move the HSM */ + poll_next = ata_hsm_move(ap, qc, status, 1); - /* check error */ - if (status & (ATA_ERR | ATA_DF)) { - qc->err_mask |= AC_ERR_DEV; - ap->hsm_task_state = HSM_ST_ERR; - return; - } - - /* transfer data if any */ - if (is_atapi_taskfile(&qc->tf)) { - /* DRQ=0 means no more data to transfer */ - if ((status & ATA_DRQ) == 0) { - ap->hsm_task_state = HSM_ST_LAST; - return; - } - - atapi_pio_bytes(qc); - } else { - /* handle BSY=0, DRQ=0 as error */ - if ((status & ATA_DRQ) == 0) { - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - return; - } - - ata_pio_sector(qc); - } - - ata_altstatus(ap); /* flush */ -} - -static void ata_pio_error(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - - if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_WARNING "ata%u: PIO error\n", ap->id); - - /* make sure qc->err_mask is available to - * know what's wrong and recover + /* another command or interrupt handler + * may be running at this point. */ - WARN_ON(qc->err_mask == 0); - - ap->hsm_task_state = HSM_ST_IDLE; - - ata_poll_qc_complete(qc); -} - -static void ata_pio_task(void *_data) -{ - struct ata_port *ap = _data; - unsigned long timeout; - int qc_completed; - -fsm_start: - timeout = 0; - qc_completed = 0; - - switch (ap->hsm_task_state) { - case HSM_ST_IDLE: - return; - - case HSM_ST: - ata_pio_block(ap); - break; - - case HSM_ST_LAST: - qc_completed = ata_pio_complete(ap); - break; - - case HSM_ST_POLL: - case HSM_ST_LAST_POLL: - timeout = ata_pio_poll(ap); - break; - - case HSM_ST_TMOUT: - case HSM_ST_ERR: - ata_pio_error(ap); - return; - } - - if (timeout) - ata_port_queue_task(ap, ata_pio_task, ap, timeout); - else if (!qc_completed) + if (poll_next) goto fsm_start; } -/** - * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * If DMA is to be performed, exit immediately. - * Otherwise, we are in polling mode, so poll - * status under operation succeeds or fails. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void atapi_packet_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { - qc->err_mask |= AC_ERR_TIMEOUT; - goto err_out; - } - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - qc->err_mask |= AC_ERR_HSM; - goto err_out; - } - - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - unsigned long flags; - - /* Once we're done issuing command and kicking bmdma, - * irq handler takes over. To not lose irq, we need - * to clear NOINTR flag before sending cdb, but - * interrupt handler shouldn't be invoked before we're - * finished. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); - } else { - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - /* PIO commands are handled by polling */ - ap->hsm_task_state = HSM_ST; - ata_port_queue_task(ap, ata_pio_task, ap, 0); - } - - return; - -err_out: - ata_poll_qc_complete(qc); -} - -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(&host_set->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", - ap->id, qc->tf.command, drv_stat, host_stat); - - /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(drv_stat); - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_new - Request an available ATA command, for queueing * @ap: Port associated with device @dev @@ -3888,9 +4251,14 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) struct ata_queued_cmd *qc = NULL; unsigned int i; - for (i = 0; i < ATA_MAX_QUEUE; i++) - if (!test_and_set_bit(i, &ap->qactive)) { - qc = ata_qc_from_tag(ap, i); + /* no command while frozen */ + if (unlikely(ap->flags & ATA_FLAG_FROZEN)) + return NULL; + + /* the last tag is reserved for internal command. */ + for (i = 0; i < ATA_MAX_QUEUE - 1; i++) + if (!test_and_set_bit(i, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, i); break; } @@ -3902,16 +4270,15 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) /** * ata_qc_new_init - Request an available ATA command, and initialize it - * @ap: Port associated with device @dev * @dev: Device from whom we request an available command structure * * LOCKING: * None. */ -struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, - struct ata_device *dev) +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) { + struct ata_port *ap = dev->ap; struct ata_queued_cmd *qc; qc = ata_qc_new(ap); @@ -3946,36 +4313,153 @@ void ata_qc_free(struct ata_queued_cmd *qc) qc->flags = 0; tag = qc->tag; if (likely(ata_tag_valid(tag))) { - if (tag == ap->active_tag) - ap->active_tag = ATA_TAG_POISON; qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qactive); + clear_bit(tag, &ap->qc_allocated); } } void __ata_qc_complete(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); + /* command should be marked inactive atomically with qc completion */ + if (qc->tf.protocol == ATA_PROT_NCQ) + ap->sactive &= ~(1 << qc->tag); + else + ap->active_tag = ATA_TAG_POISON; + /* atapi: mark qc as inactive to prevent the interrupt handler * from completing the command twice later, before the error handler * is called. (when rc != 0 and atapi request sense is needed) */ qc->flags &= ~ATA_QCFLAG_ACTIVE; + ap->qc_active &= ~(1 << qc->tag); /* call completion callback */ qc->complete_fn(qc); } +/** + * ata_qc_complete - Complete an active ATA command + * @qc: Command to complete + * @err_mask: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* XXX: New EH and old EH use different mechanisms to + * synchronize EH with regular execution path. + * + * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. + * Normal execution path is responsible for not accessing a + * failed qc. libata core enforces the rule by returning NULL + * from ata_qc_from_tag() for failed qcs. + * + * Old EH depends on ata_qc_complete() nullifying completion + * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does + * not synchronize with interrupt handler. Only PIO task is + * taken care of. + */ + if (ap->ops->error_handler) { + WARN_ON(ap->flags & ATA_FLAG_FROZEN); + + if (unlikely(qc->err_mask)) + qc->flags |= ATA_QCFLAG_FAILED; + + if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { + if (!ata_tag_internal(qc->tag)) { + /* always fill result TF for failed qc */ + ap->ops->tf_read(ap, &qc->result_tf); + ata_qc_schedule_eh(qc); + return; + } + } + + /* read result TF if requested */ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } else { + if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) + return; + + /* read result TF if failed or requested */ + if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } +} + +/** + * ata_qc_complete_multiple - Complete multiple qcs successfully + * @ap: port in question + * @qc_active: new qc_active mask + * @finish_qc: LLDD callback invoked before completing a qc + * + * Complete in-flight commands. This functions is meant to be + * called from low-level driver's interrupt routine to complete + * requests normally. ap->qc_active and @qc_active is compared + * and commands are completed accordingly. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of completed commands on success, -errno otherwise. + */ +int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, + void (*finish_qc)(struct ata_queued_cmd *)) +{ + int nr_done = 0; + u32 done_mask; + int i; + + done_mask = ap->qc_active ^ qc_active; + + if (unlikely(done_mask & qc_active)) { + ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " + "(%08x->%08x)\n", ap->qc_active, qc_active); + return -EINVAL; + } + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + struct ata_queued_cmd *qc; + + if (!(done_mask & (1 << i))) + continue; + + if ((qc = ata_qc_from_tag(ap, i))) { + if (finish_qc) + finish_qc(qc); + ata_qc_complete(qc); + nr_done++; + } + } + + return nr_done; +} + static inline int ata_should_dma_map(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; switch (qc->tf.protocol) { + case ATA_PROT_NCQ: case ATA_PROT_DMA: case ATA_PROT_ATAPI_DMA: return 1; @@ -4010,8 +4494,22 @@ void ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - qc->ap->active_tag = qc->tag; + /* Make sure only one non-NCQ command is outstanding. The + * check is skipped for old EH because it reuses active qc to + * request ATAPI sense. + */ + WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); + + if (qc->tf.protocol == ATA_PROT_NCQ) { + WARN_ON(ap->sactive & (1 << qc->tag)); + ap->sactive |= 1 << qc->tag; + } else { + WARN_ON(ap->sactive); + ap->active_tag = qc->tag; + } + qc->flags |= ATA_QCFLAG_ACTIVE; + ap->qc_active |= 1 << qc->tag; if (ata_should_dma_map(qc)) { if (qc->flags & ATA_QCFLAG_SG) { @@ -4061,43 +4559,105 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + /* Use polling pio if the LLD doesn't handle + * interrupt driven pio and atapi CDB interrupt. + */ + if (ap->flags & ATA_FLAG_PIO_POLLING) { + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + case ATA_PROT_ATAPI_DMA: + if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + /* see ata_dma_blacklisted() */ + BUG(); + break; + default: + break; + } + } + + /* select the device */ ata_dev_select(ap, qc->dev->devno, 1, 0); + /* start the command */ switch (qc->tf.protocol) { case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host(ap, &qc->tf); + ap->hsm_task_state = HSM_ST_LAST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + break; case ATA_PROT_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; break; - case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ - ata_qc_set_polling(qc); + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host(ap, &qc->tf); - ap->hsm_task_state = HSM_ST; - ata_port_queue_task(ap, ata_pio_task, ap, 0); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + /* always send first data block using + * the ata_pio_task() codepath. + */ + } else { + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + } + break; case ATA_PROT_ATAPI: - ata_qc_set_polling(qc); - ata_tf_to_host(ap, &qc->tf); - ata_port_queue_task(ap, atapi_packet_task, ap, 0); - break; - case ATA_PROT_ATAPI_NODATA: - ap->flags |= ATA_FLAG_NOINTR; + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host(ap, &qc->tf); - ata_port_queue_task(ap, atapi_packet_task, ap, 0); + + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + ata_port_queue_task(ap, ata_pio_task, qc, 0); break; case ATA_PROT_ATAPI_DMA: - ap->flags |= ATA_FLAG_NOINTR; + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - ata_port_queue_task(ap, atapi_packet_task, ap, 0); + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + ata_port_queue_task(ap, ata_pio_task, qc, 0); break; default: @@ -4127,52 +4687,66 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) inline unsigned int ata_host_intr (struct ata_port *ap, struct ata_queued_cmd *qc) { - u8 status, host_stat; + u8 status, host_stat = 0; - switch (qc->tf.protocol) { + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->id, qc->tf.protocol, ap->hsm_task_state); - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI: - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - case ATA_PROT_ATAPI_NODATA: - case ATA_PROT_NODATA: - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto idle_irq; - DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; default: goto idle_irq; } + /* check altstatus */ + status = ata_altstatus(ap); + if (status & ATA_BUSY) + goto idle_irq; + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto idle_irq; + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + ata_hsm_move(ap, qc, status, 0); return 1; /* irq handled */ idle_irq: @@ -4181,7 +4755,7 @@ idle_irq: #ifdef ATA_IRQ_TRAP if ((ap->stats.idle_irq % 1000) == 0) { ata_irq_ack(ap, 0); /* debug trap */ - printk(KERN_WARNING "ata%d: irq trap\n", ap->id); + ata_port_printk(ap, KERN_WARNING, "irq trap\n"); return 1; } #endif @@ -4219,11 +4793,11 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) ap = host_set->ports[i]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN)) && + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && (qc->flags & ATA_QCFLAG_ACTIVE)) handled |= ata_host_intr(ap, qc); } @@ -4234,32 +4808,168 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } +/** + * sata_scr_valid - test whether SCRs are accessible + * @ap: ATA port to test SCR accessibility for + * + * Test whether SCRs are accessible for @ap. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if SCRs are accessible, 0 otherwise. + */ +int sata_scr_valid(struct ata_port *ap) +{ + return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; +} + +/** + * sata_scr_read - read SCR register of the specified port + * @ap: ATA port to read SCR for + * @reg: SCR to read + * @val: Place to store read value + * + * Read SCR register @reg of @ap into *@val. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_read(struct ata_port *ap, int reg, u32 *val) +{ + if (sata_scr_valid(ap)) { + *val = ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write - write SCR register of the specified port + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * Write @val to SCR register @reg of @ap. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write_flush - write SCR register of the specified port and flush + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * This function is identical to sata_scr_write() except that this + * function performs flush after writing to the register. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * ata_port_online - test whether the given port is online + * @ap: ATA port to test + * + * Test whether @ap is online. Note that this function returns 0 + * if online status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port online status is available and online. + */ +int ata_port_online(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) + return 1; + return 0; +} + +/** + * ata_port_offline - test whether the given port is offline + * @ap: ATA port to test + * + * Test whether @ap is offline. Note that this function returns + * 0 if offline status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port offline status is available and offline. + */ +int ata_port_offline(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) + return 1; + return 0; +} /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, * without filling any other registers */ -static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev, - u8 cmd) +static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) { struct ata_taskfile tf; int err; - ata_tf_init(ap, &tf, dev->devno); + ata_tf_init(dev, &tf); tf.command = cmd; tf.flags |= ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; - err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); if (err) - printk(KERN_ERR "%s: ata command failed: %d\n", - __FUNCTION__, err); + ata_dev_printk(dev, KERN_ERR, "%s: ata command failed: %d\n", + __FUNCTION__, err); return err; } -static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev) +static int ata_flush_cache(struct ata_device *dev) { u8 cmd; @@ -4271,22 +4981,21 @@ static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev) else cmd = ATA_CMD_FLUSH; - return ata_do_simple_cmd(ap, dev, cmd); + return ata_do_simple_cmd(dev, cmd); } -static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev) +static int ata_standby_drive(struct ata_device *dev) { - return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1); + return ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); } -static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) +static int ata_start_drive(struct ata_device *dev) { - return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE); + return ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE); } /** * ata_device_resume - wakeup a previously suspended devices - * @ap: port the device is connected to * @dev: the device to resume * * Kick the drive back into action, by sending it an idle immediate @@ -4294,40 +5003,47 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) * and host. * */ -int ata_device_resume(struct ata_port *ap, struct ata_device *dev) +int ata_device_resume(struct ata_device *dev) { + struct ata_port *ap = dev->ap; + if (ap->flags & ATA_FLAG_SUSPENDED) { + struct ata_device *failed_dev; + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000); + ap->flags &= ~ATA_FLAG_SUSPENDED; - ata_set_mode(ap); + while (ata_set_mode(ap, &failed_dev)) + ata_dev_disable(failed_dev); } - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) return 0; if (dev->class == ATA_DEV_ATA) - ata_start_drive(ap, dev); + ata_start_drive(dev); return 0; } /** * ata_device_suspend - prepare a device for suspend - * @ap: port the device is connected to * @dev: the device to suspend * @state: target power management state * * Flush the cache on the drive, if appropriate, then issue a * standbynow command. */ -int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state) +int ata_device_suspend(struct ata_device *dev, pm_message_t state) { - if (!ata_dev_present(dev)) + struct ata_port *ap = dev->ap; + + if (!ata_dev_enabled(dev)) return 0; if (dev->class == ATA_DEV_ATA) - ata_flush_cache(ap, dev); + ata_flush_cache(dev); if (state.event != PM_EVENT_FREEZE) - ata_standby_drive(ap, dev); + ata_standby_drive(dev); ap->flags |= ATA_FLAG_SUSPENDED; return 0; } @@ -4414,6 +5130,38 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) ap->ops->port_stop(ap); } +/** + * ata_dev_init - Initialize an ata_device structure + * @dev: Device structure to initialize + * + * Initialize @dev in preparation for probing. + * + * LOCKING: + * Inherited from caller. + */ +void ata_dev_init(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + unsigned long flags; + + /* SATA spd limit is bound to the first device */ + ap->sata_spd_limit = ap->hw_sata_spd_limit; + + /* High bits of dev->flags are used to record warm plug + * requests which occur asynchronously. Synchronize using + * host_set lock. + */ + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_INIT_MASK; + spin_unlock_irqrestore(ap->lock, flags); + + memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, + sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); + dev->pio_mask = UINT_MAX; + dev->mwdma_mask = UINT_MAX; + dev->udma_mask = UINT_MAX; +} + /** * ata_host_init - Initialize an ata_port structure * @ap: Structure to initialize @@ -4428,7 +5176,6 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * LOCKING: * Inherited from caller. */ - static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, struct ata_host_set *host_set, const struct ata_probe_ent *ent, unsigned int port_no) @@ -4441,7 +5188,8 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, host->unique_id = ata_unique_id++; host->max_cmd_len = 12; - ap->flags = ATA_FLAG_PORT_DISABLED; + ap->lock = &host_set->lock; + ap->flags = ATA_FLAG_DISABLED; ap->id = host->unique_id; ap->host = host; ap->ctl = ATA_DEVCTL_OBS; @@ -4455,19 +5203,35 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->udma_mask = ent->udma_mask; ap->flags |= ent->host_flags; ap->ops = ent->port_ops; - ap->cbl = ATA_CBL_NONE; + ap->hw_sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; +#if defined(ATA_VERBOSE_DEBUG) + /* turn on all debugging levels */ + ap->msg_enable = 0x00FF; +#elif defined(ATA_DEBUG) + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; +#else + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; +#endif + INIT_WORK(&ap->port_task, NULL, NULL); + INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); + INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); INIT_LIST_HEAD(&ap->eh_done_q); + init_waitqueue_head(&ap->eh_wait_q); + + /* set cable type */ + ap->cbl = ATA_CBL_NONE; + if (ap->flags & ATA_FLAG_SATA) + ap->cbl = ATA_CBL_SATA; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; + dev->ap = ap; dev->devno = i; - dev->pio_mask = UINT_MAX; - dev->mwdma_mask = UINT_MAX; - dev->udma_mask = UINT_MAX; + ata_dev_init(dev); } #ifdef ATA_IRQ_TRAP @@ -4503,7 +5267,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, DPRINTK("ENTER\n"); - if (!ent->port_ops->probe_reset && + if (!ent->port_ops->error_handler && !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { printk(KERN_ERR "ata%u: no reset mechanism available\n", port_no); @@ -4516,7 +5280,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, host->transportt = &ata_scsi_transport_template; - ap = (struct ata_port *) &host->hostdata[0]; + ap = ata_shost_to_port(host); ata_host_init(ap, host, host_set, ent, port_no); @@ -4549,12 +5313,12 @@ err_out: * RETURNS: * Number of ports registered. Zero on error (no ports registered). */ - int ata_device_add(const struct ata_probe_ent *ent) { unsigned int count = 0, i; struct device *dev = ent->dev; struct ata_host_set *host_set; + int rc; DPRINTK("ENTER\n"); /* alloc a container for our list of ATA ports (buses) */ @@ -4587,18 +5351,18 @@ int ata_device_add(const struct ata_probe_ent *ent) (ap->pio_mask << ATA_SHIFT_PIO); /* print per-port info to dmesg */ - printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX " - "bmdma 0x%lX irq %lu\n", - ap->id, - ap->flags & ATA_FLAG_SATA ? 'S' : 'P', - ata_mode_string(xfer_mode_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - ent->irq); + ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " + "ctl 0x%lX bmdma 0x%lX irq %lu\n", + ap->flags & ATA_FLAG_SATA ? 'S' : 'P', + ata_mode_string(xfer_mode_mask), + ap->ioaddr.cmd_addr, + ap->ioaddr.ctl_addr, + ap->ioaddr.bmdma_addr, + ent->irq); ata_chk_status(ap); host_set->ops->irq_clear(ap); + ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ count++; } @@ -4606,41 +5370,72 @@ int ata_device_add(const struct ata_probe_ent *ent) goto err_free_ret; /* obtain irq, that is shared between channels */ - if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set)) + rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host_set); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq, rc); goto err_out; + } /* perform each probe synchronously */ DPRINTK("probe begin\n"); for (i = 0; i < count; i++) { struct ata_port *ap; + u32 scontrol; int rc; ap = host_set->ports[i]; - DPRINTK("ata%u: bus probe begin\n", ap->id); - rc = ata_bus_probe(ap); - DPRINTK("ata%u: bus probe end\n", ap->id); - - if (rc) { - /* FIXME: do something useful here? - * Current libata behavior will - * tear down everything when - * the module is removed - * or the h/w is unplugged. - */ + /* init sata_spd_limit to the current value */ + if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { + int spd = (scontrol >> 4) & 0xf; + ap->hw_sata_spd_limit &= (1 << spd) - 1; } + ap->sata_spd_limit = ap->hw_sata_spd_limit; rc = scsi_add_host(ap->host, dev); if (rc) { - printk(KERN_ERR "ata%u: scsi_add_host failed\n", - ap->id); + ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); /* FIXME: do something useful here */ /* FIXME: handle unconditional calls to * scsi_scan_host and ata_host_remove, below, * at the very least */ } + + if (ap->ops->error_handler) { + unsigned long flags; + + ata_port_probe(ap); + + /* kick EH for boot probing */ + spin_lock_irqsave(ap->lock, flags); + + ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1; + ap->eh_info.action |= ATA_EH_SOFTRESET; + + ap->flags |= ATA_FLAG_LOADING; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait for EH to finish */ + ata_port_wait_eh(ap); + } else { + DPRINTK("ata%u: bus probe begin\n", ap->id); + rc = ata_bus_probe(ap); + DPRINTK("ata%u: bus probe end\n", ap->id); + + if (rc) { + /* FIXME: do something useful here? + * Current libata behavior will + * tear down everything when + * the module is removed + * or the h/w is unplugged. + */ + } + } } /* probes are done, now scan each port's disk(s) */ @@ -4667,6 +5462,63 @@ err_free_ret: return 0; } +/** + * ata_port_detach - Detach ATA port in prepration of device removal + * @ap: ATA port to be detached + * + * Detach all ATA devices and the associated SCSI devices of @ap; + * then, remove the associated SCSI host. @ap is guaranteed to + * be quiescent on return from this function. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_detach(struct ata_port *ap) +{ + unsigned long flags; + int i; + + if (!ap->ops->error_handler) + return; + + /* tell EH we're leaving & flush EH */ + spin_lock_irqsave(ap->lock, flags); + ap->flags |= ATA_FLAG_UNLOADING; + spin_unlock_irqrestore(ap->lock, flags); + + ata_port_wait_eh(ap); + + /* EH is now guaranteed to see UNLOADING, so no new device + * will be attached. Disable all existing devices. + */ + spin_lock_irqsave(ap->lock, flags); + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_disable(&ap->device[i]); + + spin_unlock_irqrestore(ap->lock, flags); + + /* Final freeze & EH. All in-flight commands are aborted. EH + * will be skipped and retrials will be terminated with bad + * target. + */ + spin_lock_irqsave(ap->lock, flags); + ata_port_freeze(ap); /* won't be thawed */ + spin_unlock_irqrestore(ap->lock, flags); + + ata_port_wait_eh(ap); + + /* Flush hotplug task. The sequence is similar to + * ata_port_flush_task(). + */ + flush_workqueue(ata_aux_wq); + cancel_delayed_work(&ap->hotplug_task); + flush_workqueue(ata_aux_wq); + + /* remove the associated SCSI host */ + scsi_remove_host(ap->host); +} + /** * ata_host_set_remove - PCI layer callback for device removal * @host_set: ATA host set that was removed @@ -4680,18 +5532,15 @@ err_free_ret: void ata_host_set_remove(struct ata_host_set *host_set) { - struct ata_port *ap; unsigned int i; - for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; - scsi_remove_host(ap->host); - } + for (i = 0; i < host_set->n_ports; i++) + ata_port_detach(host_set->ports[i]); free_irq(host_set->irq, host_set); for (i = 0; i < host_set->n_ports; i++) { - ap = host_set->ports[i]; + struct ata_port *ap = host_set->ports[i]; ata_scsi_release(ap->host); @@ -4729,15 +5578,12 @@ void ata_host_set_remove(struct ata_host_set *host_set) int ata_scsi_release(struct Scsi_Host *host) { - struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; - int i; + struct ata_port *ap = ata_shost_to_port(host); DPRINTK("ENTER\n"); ap->ops->port_disable(ap); ata_host_remove(ap, 0); - for (i = 0; i < ATA_MAX_DEVICES; i++) - kfree(ap->device[i].id); DPRINTK("EXIT\n"); return 1; @@ -4797,8 +5643,12 @@ void ata_pci_remove_one (struct pci_dev *pdev) { struct device *dev = pci_dev_to_dev(pdev); struct ata_host_set *host_set = dev_get_drvdata(dev); + struct ata_host_set *host_set2 = host_set->next; ata_host_set_remove(host_set); + if (host_set2) + ata_host_set_remove(host_set2); + pci_release_regions(pdev); pci_disable_device(pdev); dev_set_drvdata(dev, NULL); @@ -4863,6 +5713,12 @@ static int __init ata_init(void) if (!ata_wq) return -ENOMEM; + ata_aux_wq = create_singlethread_workqueue("ata_aux"); + if (!ata_aux_wq) { + destroy_workqueue(ata_wq); + return -ENOMEM; + } + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); return 0; } @@ -4870,6 +5726,7 @@ static int __init ata_init(void) static void __exit ata_exit(void) { destroy_workqueue(ata_wq); + destroy_workqueue(ata_aux_wq); } module_init(ata_init); @@ -4896,6 +5753,52 @@ int ata_ratelimit(void) return rc; } +/** + * ata_wait_register - wait until register value changes + * @reg: IO-mapped register + * @mask: Mask to apply to read register value + * @val: Wait condition + * @interval_msec: polling interval in milliseconds + * @timeout_msec: timeout in milliseconds + * + * Waiting for some bits of register to change is a common + * operation for ATA controllers. This function reads 32bit LE + * IO-mapped register @reg and tests for the following condition. + * + * (*@reg & mask) != val + * + * If the condition is met, it returns; otherwise, the process is + * repeated after @interval_msec until timeout. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * The final register value. + */ +u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, + unsigned long interval_msec, + unsigned long timeout_msec) +{ + unsigned long timeout; + u32 tmp; + + tmp = ioread32(reg); + + /* Calculate timeout _after_ the first read to make sure + * preceding writes reach the controller before starting to + * eat away the timeout. + */ + timeout = jiffies + (timeout_msec * HZ) / 1000; + + while ((tmp & mask) == val && time_before(jiffies, timeout)) { + msleep(interval_msec); + tmp = ioread32(reg); + } + + return tmp; +} + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -4903,15 +5806,20 @@ int ata_ratelimit(void) * Do not depend on ABI/API stability. */ +EXPORT_SYMBOL_GPL(sata_deb_timing_boot); +EXPORT_SYMBOL_GPL(sata_deb_timing_eh); +EXPORT_SYMBOL_GPL(sata_deb_timing_before_fsrst); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_device_add); +EXPORT_SYMBOL_GPL(ata_port_detach); EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(__ata_qc_complete); +EXPORT_SYMBOL_GPL(ata_hsm_move); +EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_tf_load); EXPORT_SYMBOL_GPL(ata_tf_read); EXPORT_SYMBOL_GPL(ata_noop_dev_select); @@ -4925,6 +5833,9 @@ EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); +EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_noop_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); @@ -4932,33 +5843,46 @@ EXPORT_SYMBOL_GPL(ata_bmdma_start); EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); EXPORT_SYMBOL_GPL(ata_bmdma_status); EXPORT_SYMBOL_GPL(ata_bmdma_stop); +EXPORT_SYMBOL_GPL(ata_bmdma_freeze); +EXPORT_SYMBOL_GPL(ata_bmdma_thaw); +EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); +EXPORT_SYMBOL_GPL(sata_set_spd); +EXPORT_SYMBOL_GPL(sata_phy_debounce); +EXPORT_SYMBOL_GPL(sata_phy_resume); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); -EXPORT_SYMBOL_GPL(ata_std_probeinit); +EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); -EXPORT_SYMBOL_GPL(ata_std_probe_reset); -EXPORT_SYMBOL_GPL(ata_drive_probe_reset); EXPORT_SYMBOL_GPL(ata_dev_revalidate); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); +EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); +EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); +EXPORT_SYMBOL_GPL(sata_scr_valid); +EXPORT_SYMBOL_GPL(sata_scr_read); +EXPORT_SYMBOL_GPL(sata_scr_write); +EXPORT_SYMBOL_GPL(sata_scr_write_flush); +EXPORT_SYMBOL_GPL(ata_port_online); +EXPORT_SYMBOL_GPL(ata_port_offline); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); -EXPORT_SYMBOL_GPL(ata_eh_qc_complete); -EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_compute); @@ -4980,3 +5904,13 @@ EXPORT_SYMBOL_GPL(ata_device_suspend); EXPORT_SYMBOL_GPL(ata_device_resume); EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); + +EXPORT_SYMBOL_GPL(ata_eng_timeout); +EXPORT_SYMBOL_GPL(ata_port_schedule_eh); +EXPORT_SYMBOL_GPL(ata_port_abort); +EXPORT_SYMBOL_GPL(ata_port_freeze); +EXPORT_SYMBOL_GPL(ata_eh_freeze_port); +EXPORT_SYMBOL_GPL(ata_eh_thaw_port); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); +EXPORT_SYMBOL_GPL(ata_do_eh); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c new file mode 100644 index 000000000000..823385981a7a --- /dev/null +++ b/drivers/scsi/libata-eh.c @@ -0,0 +1,1907 @@ +/* + * libata-eh.c - libata error handling + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2006 Tejun Heo + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include "scsi_transport_api.h" + +#include + +#include "libata.h" + +static void __ata_port_freeze(struct ata_port *ap); +static void ata_eh_finish(struct ata_port *ap); + +static void ata_ering_record(struct ata_ering *ering, int is_io, + unsigned int err_mask) +{ + struct ata_ering_entry *ent; + + WARN_ON(!err_mask); + + ering->cursor++; + ering->cursor %= ATA_ERING_SIZE; + + ent = &ering->ring[ering->cursor]; + ent->is_io = is_io; + ent->err_mask = err_mask; + ent->timestamp = get_jiffies_64(); +} + +static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering) +{ + struct ata_ering_entry *ent = &ering->ring[ering->cursor]; + if (!ent->err_mask) + return NULL; + return ent; +} + +static int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg) +{ + int idx, rc = 0; + struct ata_ering_entry *ent; + + idx = ering->cursor; + do { + ent = &ering->ring[idx]; + if (!ent->err_mask) + break; + rc = map_fn(ent, arg); + if (rc) + break; + idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE; + } while (idx != ering->cursor); + + return rc; +} + +/** + * ata_scsi_timed_out - SCSI layer time out callback + * @cmd: timed out SCSI command + * + * Handles SCSI layer timeout. We race with normal completion of + * the qc for @cmd. If the qc is already gone, we lose and let + * the scsi command finish (EH_HANDLED). Otherwise, the qc has + * timed out and EH should be invoked. Prevent ata_qc_complete() + * from finishing it by setting EH_SCHEDULED and return + * EH_NOT_HANDLED. + * + * TODO: kill this function once old EH is gone. + * + * LOCKING: + * Called from timer context + * + * RETURNS: + * EH_HANDLED or EH_NOT_HANDLED + */ +enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ata_port *ap = ata_shost_to_port(host); + unsigned long flags; + struct ata_queued_cmd *qc; + enum scsi_eh_timer_return ret; + + DPRINTK("ENTER\n"); + + if (ap->ops->error_handler) { + ret = EH_NOT_HANDLED; + goto out; + } + + ret = EH_HANDLED; + spin_lock_irqsave(ap->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + WARN_ON(qc->scsicmd != cmd); + qc->flags |= ATA_QCFLAG_EH_SCHEDULED; + qc->err_mask |= AC_ERR_TIMEOUT; + ret = EH_NOT_HANDLED; + } + spin_unlock_irqrestore(ap->lock, flags); + + out: + DPRINTK("EXIT, ret=%d\n", ret); + return ret; +} + +/** + * ata_scsi_error - SCSI layer error handler callback + * @host: SCSI host on which error occurred + * + * Handles SCSI-layer-thrown error events. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + * + * RETURNS: + * Zero. + */ +void ata_scsi_error(struct Scsi_Host *host) +{ + struct ata_port *ap = ata_shost_to_port(host); + spinlock_t *ap_lock = ap->lock; + int i, repeat_cnt = ATA_EH_MAX_REPEAT; + unsigned long flags; + + DPRINTK("ENTER\n"); + + /* synchronize with port task */ + ata_port_flush_task(ap); + + /* synchronize with host_set lock and sort out timeouts */ + + /* For new EH, all qcs are finished in one of three ways - + * normal completion, error completion, and SCSI timeout. + * Both cmpletions can race against SCSI timeout. When normal + * completion wins, the qc never reaches EH. When error + * completion wins, the qc has ATA_QCFLAG_FAILED set. + * + * When SCSI timeout wins, things are a bit more complex. + * Normal or error completion can occur after the timeout but + * before this point. In such cases, both types of + * completions are honored. A scmd is determined to have + * timed out iff its associated qc is active and not failed. + */ + if (ap->ops->error_handler) { + struct scsi_cmnd *scmd, *tmp; + int nr_timedout = 0; + + spin_lock_irqsave(ap_lock, flags); + + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { + struct ata_queued_cmd *qc; + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + qc = __ata_qc_from_tag(ap, i); + if (qc->flags & ATA_QCFLAG_ACTIVE && + qc->scsicmd == scmd) + break; + } + + if (i < ATA_MAX_QUEUE) { + /* the scmd has an associated qc */ + if (!(qc->flags & ATA_QCFLAG_FAILED)) { + /* which hasn't failed yet, timeout */ + qc->err_mask |= AC_ERR_TIMEOUT; + qc->flags |= ATA_QCFLAG_FAILED; + nr_timedout++; + } + } else { + /* Normal completion occurred after + * SCSI timeout but before this point. + * Successfully complete it. + */ + scmd->retries = scmd->allowed; + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); + } + } + + /* If we have timed out qcs. They belong to EH from + * this point but the state of the controller is + * unknown. Freeze the port to make sure the IRQ + * handler doesn't diddle with those qcs. This must + * be done atomically w.r.t. setting QCFLAG_FAILED. + */ + if (nr_timedout) + __ata_port_freeze(ap); + + spin_unlock_irqrestore(ap_lock, flags); + } else + spin_unlock_wait(ap_lock); + + repeat: + /* invoke error handler */ + if (ap->ops->error_handler) { + /* fetch & clear EH info */ + spin_lock_irqsave(ap_lock, flags); + + memset(&ap->eh_context, 0, sizeof(ap->eh_context)); + ap->eh_context.i = ap->eh_info; + memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + + ap->flags |= ATA_FLAG_EH_IN_PROGRESS; + ap->flags &= ~ATA_FLAG_EH_PENDING; + + spin_unlock_irqrestore(ap_lock, flags); + + /* invoke EH. if unloading, just finish failed qcs */ + if (!(ap->flags & ATA_FLAG_UNLOADING)) + ap->ops->error_handler(ap); + else + ata_eh_finish(ap); + + /* Exception might have happend after ->error_handler + * recovered the port but before this point. Repeat + * EH in such case. + */ + spin_lock_irqsave(ap_lock, flags); + + if (ap->flags & ATA_FLAG_EH_PENDING) { + if (--repeat_cnt) { + ata_port_printk(ap, KERN_INFO, + "EH pending after completion, " + "repeating EH (cnt=%d)\n", repeat_cnt); + spin_unlock_irqrestore(ap_lock, flags); + goto repeat; + } + ata_port_printk(ap, KERN_ERR, "EH pending after %d " + "tries, giving up\n", ATA_EH_MAX_REPEAT); + } + + /* this run is complete, make sure EH info is clear */ + memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + + /* Clear host_eh_scheduled while holding ap_lock such + * that if exception occurs after this point but + * before EH completion, SCSI midlayer will + * re-initiate EH. + */ + host->host_eh_scheduled = 0; + + spin_unlock_irqrestore(ap_lock, flags); + } else { + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + ap->ops->eng_timeout(ap); + } + + /* finish or retry handled scmd's and clean up */ + WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); + + scsi_eh_flush_done_q(&ap->eh_done_q); + + /* clean up */ + spin_lock_irqsave(ap_lock, flags); + + if (ap->flags & ATA_FLAG_LOADING) { + ap->flags &= ~ATA_FLAG_LOADING; + } else { + if (ap->flags & ATA_FLAG_SCSI_HOTPLUG) + queue_work(ata_aux_wq, &ap->hotplug_task); + if (ap->flags & ATA_FLAG_RECOVERED) + ata_port_printk(ap, KERN_INFO, "EH complete\n"); + } + + ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED); + + /* tell wait_eh that we're done */ + ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS; + wake_up_all(&ap->eh_wait_q); + + spin_unlock_irqrestore(ap_lock, flags); + + DPRINTK("EXIT\n"); +} + +/** + * ata_port_wait_eh - Wait for the currently pending EH to complete + * @ap: Port to wait EH for + * + * Wait until the currently pending EH is complete. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_wait_eh(struct ata_port *ap) +{ + unsigned long flags; + DEFINE_WAIT(wait); + + retry: + spin_lock_irqsave(ap->lock, flags); + + while (ap->flags & (ATA_FLAG_EH_PENDING | ATA_FLAG_EH_IN_PROGRESS)) { + prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); + spin_unlock_irqrestore(ap->lock, flags); + schedule(); + spin_lock_irqsave(ap->lock, flags); + } + finish_wait(&ap->eh_wait_q, &wait); + + spin_unlock_irqrestore(ap->lock, flags); + + /* make sure SCSI EH is complete */ + if (scsi_host_in_recovery(ap->host)) { + msleep(10); + goto retry; + } +} + +/** + * ata_qc_timeout - Handle timeout of queued command + * @qc: Command that timed out + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * TODO: kill this function once old EH is gone. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +static void ata_qc_timeout(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 host_stat = 0, drv_stat; + unsigned long flags; + + DPRINTK("ENTER\n"); + + ap->hsm_task_state = HSM_ST_IDLE; + + spin_lock_irqsave(ap->lock, flags); + + switch (qc->tf.protocol) { + + case ATA_PROT_DMA: + case ATA_PROT_ATAPI_DMA: + host_stat = ap->ops->bmdma_status(ap); + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + /* fall through */ + + default: + ata_altstatus(ap); + drv_stat = ata_chk_status(ap); + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, " + "stat 0x%x host_stat 0x%x\n", + qc->tf.command, drv_stat, host_stat); + + /* complete taskfile transaction */ + qc->err_mask |= AC_ERR_TIMEOUT; + break; + } + + spin_unlock_irqrestore(ap->lock, flags); + + ata_eh_qc_complete(qc); + + DPRINTK("EXIT\n"); +} + +/** + * ata_eng_timeout - Handle timeout of queued command + * @ap: Port on which timed-out command is active + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * TODO: kill this function once old EH is gone. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +void ata_eng_timeout(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); + + DPRINTK("EXIT\n"); +} + +/** + * ata_qc_schedule_eh - schedule qc for error handling + * @qc: command to schedule error handling for + * + * Schedule error handling for @qc. EH will kick in as soon as + * other commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_qc_schedule_eh(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + WARN_ON(!ap->ops->error_handler); + + qc->flags |= ATA_QCFLAG_FAILED; + qc->ap->flags |= ATA_FLAG_EH_PENDING; + + /* The following will fail if timeout has already expired. + * ata_scsi_error() takes care of such scmds on EH entry. + * Note that ATA_QCFLAG_FAILED is unconditionally set after + * this function completes. + */ + scsi_req_abort_cmd(qc->scsicmd); +} + +/** + * ata_port_schedule_eh - schedule error handling without a qc + * @ap: ATA port to schedule EH for + * + * Schedule error handling for @ap. EH will kick in as soon as + * all commands are drained. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_port_schedule_eh(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + ap->flags |= ATA_FLAG_EH_PENDING; + scsi_schedule_eh(ap->host); + + DPRINTK("port EH scheduled\n"); +} + +/** + * ata_port_abort - abort all qc's on the port + * @ap: ATA port to abort qc's for + * + * Abort all active qc's of @ap and schedule EH. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted qc's. + */ +int ata_port_abort(struct ata_port *ap) +{ + int tag, nr_aborted = 0; + + WARN_ON(!ap->ops->error_handler); + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); + + if (qc) { + qc->flags |= ATA_QCFLAG_FAILED; + ata_qc_complete(qc); + nr_aborted++; + } + } + + if (!nr_aborted) + ata_port_schedule_eh(ap); + + return nr_aborted; +} + +/** + * __ata_port_freeze - freeze port + * @ap: ATA port to freeze + * + * This function is called when HSM violation or some other + * condition disrupts normal operation of the port. Frozen port + * is not allowed to perform any operation until the port is + * thawed, which usually follows a successful reset. + * + * ap->ops->freeze() callback can be used for freezing the port + * hardware-wise (e.g. mask interrupt and stop DMA engine). If a + * port cannot be frozen hardware-wise, the interrupt handler + * must ack and clear interrupts unconditionally while the port + * is frozen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +static void __ata_port_freeze(struct ata_port *ap) +{ + WARN_ON(!ap->ops->error_handler); + + if (ap->ops->freeze) + ap->ops->freeze(ap); + + ap->flags |= ATA_FLAG_FROZEN; + + DPRINTK("ata%u port frozen\n", ap->id); +} + +/** + * ata_port_freeze - abort & freeze port + * @ap: ATA port to freeze + * + * Abort and freeze @ap. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted commands. + */ +int ata_port_freeze(struct ata_port *ap) +{ + int nr_aborted; + + WARN_ON(!ap->ops->error_handler); + + nr_aborted = ata_port_abort(ap); + __ata_port_freeze(ap); + + return nr_aborted; +} + +/** + * ata_eh_freeze_port - EH helper to freeze port + * @ap: ATA port to freeze + * + * Freeze @ap. + * + * LOCKING: + * None. + */ +void ata_eh_freeze_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + __ata_port_freeze(ap); + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_port_thaw_port - EH helper to thaw port + * @ap: ATA port to thaw + * + * Thaw frozen port @ap. + * + * LOCKING: + * None. + */ +void ata_eh_thaw_port(struct ata_port *ap) +{ + unsigned long flags; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + + ap->flags &= ~ATA_FLAG_FROZEN; + + if (ap->ops->thaw) + ap->ops->thaw(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + DPRINTK("ata%u port thawed\n", ap->id); +} + +static void ata_eh_scsidone(struct scsi_cmnd *scmd) +{ + /* nada */ +} + +static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *scmd = qc->scsicmd; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + qc->scsidone = ata_eh_scsidone; + __ata_qc_complete(qc); + WARN_ON(ata_tag_valid(qc->tag)); + spin_unlock_irqrestore(ap->lock, flags); + + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); +} + +/** + * ata_eh_qc_complete - Complete an active ATA command from EH + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed. To be used from EH. + */ +void ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + scmd->retries = scmd->allowed; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH + * @qc: Command to retry + * + * Indicate to the mid and upper layers that an ATA command + * should be retried. To be used from EH. + * + * SCSI midlayer limits the number of retries to scmd->allowed. + * scmd->retries is decremented for commands which get retried + * due to unrelated failures (qc->err_mask is zero). + */ +void ata_eh_qc_retry(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + if (!qc->err_mask && scmd->retries) + scmd->retries--; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_detach_dev - detach ATA device + * @dev: ATA device to detach + * + * Detach @dev. + * + * LOCKING: + * None. + */ +static void ata_eh_detach_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + unsigned long flags; + + ata_dev_disable(dev); + + spin_lock_irqsave(ap->lock, flags); + + dev->flags &= ~ATA_DFLAG_DETACH; + + if (ata_scsi_offline_dev(dev)) { + dev->flags |= ATA_DFLAG_DETACHED; + ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + } + + spin_unlock_irqrestore(ap->lock, flags); +} + +static void ata_eh_clear_action(struct ata_device *dev, + struct ata_eh_info *ehi, unsigned int action) +{ + int i; + + if (!dev) { + ehi->action &= ~action; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehi->dev_action[i] &= ~action; + } else { + /* doesn't make sense for port-wide EH actions */ + WARN_ON(!(action & ATA_EH_PERDEV_MASK)); + + /* break ehi->action into ehi->dev_action */ + if (ehi->action & action) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehi->dev_action[i] |= ehi->action & action; + ehi->action &= ~action; + } + + /* turn off the specified per-dev action */ + ehi->dev_action[dev->devno] &= ~action; + } +} + +/** + * ata_eh_about_to_do - about to perform eh_action + * @ap: target ATA port + * @dev: target ATA dev for per-dev action (can be NULL) + * @action: action about to be performed + * + * Called just before performing EH actions to clear related bits + * in @ap->eh_info such that eh actions are not unnecessarily + * repeated. + * + * LOCKING: + * None. + */ +static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, + unsigned int action) +{ + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + ata_eh_clear_action(dev, &ap->eh_info, action); + ap->flags |= ATA_FLAG_RECOVERED; + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_eh_done - EH action complete + * @ap: target ATA port + * @dev: target ATA dev for per-dev action (can be NULL) + * @action: action just completed + * + * Called right after performing EH actions to clear related bits + * in @ap->eh_context. + * + * LOCKING: + * None. + */ +static void ata_eh_done(struct ata_port *ap, struct ata_device *dev, + unsigned int action) +{ + ata_eh_clear_action(dev, &ap->eh_context.i, action); +} + +/** + * ata_err_string - convert err_mask to descriptive string + * @err_mask: error mask to convert to string + * + * Convert @err_mask to descriptive string. Errors are + * prioritized according to severity and only the most severe + * error is reported. + * + * LOCKING: + * None. + * + * RETURNS: + * Descriptive string for @err_mask + */ +static const char * ata_err_string(unsigned int err_mask) +{ + if (err_mask & AC_ERR_HOST_BUS) + return "host bus error"; + if (err_mask & AC_ERR_ATA_BUS) + return "ATA bus error"; + if (err_mask & AC_ERR_TIMEOUT) + return "timeout"; + if (err_mask & AC_ERR_HSM) + return "HSM violation"; + if (err_mask & AC_ERR_SYSTEM) + return "internal error"; + if (err_mask & AC_ERR_MEDIA) + return "media error"; + if (err_mask & AC_ERR_INVALID) + return "invalid argument"; + if (err_mask & AC_ERR_DEV) + return "device error"; + return "unknown error"; +} + +/** + * ata_read_log_page - read a specific log page + * @dev: target device + * @page: page to read + * @buf: buffer to store read page + * @sectors: number of sectors to read + * + * Read log page using READ_LOG_EXT command. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +static unsigned int ata_read_log_page(struct ata_device *dev, + u8 page, void *buf, unsigned int sectors) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + DPRINTK("read log page - page %d\n", page); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_READ_LOG_EXT; + tf.lbal = page; + tf.nsect = sectors; + tf.hob_nsect = sectors >> 8; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_PIO; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, + buf, sectors * ATA_SECT_SIZE); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_eh_read_log_10h - Read log page 10h for NCQ error details + * @dev: Device to read log page 10h from + * @tag: Resulting tag of the failed command + * @tf: Resulting taskfile registers of the failed command + * + * Read log page 10h to obtain NCQ error details and clear error + * condition. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int ata_eh_read_log_10h(struct ata_device *dev, + int *tag, struct ata_taskfile *tf) +{ + u8 *buf = dev->ap->sector_buf; + unsigned int err_mask; + u8 csum; + int i; + + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1); + if (err_mask) + return -EIO; + + csum = 0; + for (i = 0; i < ATA_SECT_SIZE; i++) + csum += buf[i]; + if (csum) + ata_dev_printk(dev, KERN_WARNING, + "invalid checksum 0x%x on log page 10h\n", csum); + + if (buf[0] & 0x80) + return -ENOENT; + + *tag = buf[0] & 0x1f; + + tf->command = buf[2]; + tf->feature = buf[3]; + tf->lbal = buf[4]; + tf->lbam = buf[5]; + tf->lbah = buf[6]; + tf->device = buf[7]; + tf->hob_lbal = buf[8]; + tf->hob_lbam = buf[9]; + tf->hob_lbah = buf[10]; + tf->nsect = buf[12]; + tf->hob_nsect = buf[13]; + + return 0; +} + +/** + * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE + * @dev: device to perform REQUEST_SENSE to + * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * + * Perform ATAPI REQUEST_SENSE after the device reported CHECK + * SENSE. This function is EH helper. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure + */ +static unsigned int atapi_eh_request_sense(struct ata_device *dev, + unsigned char *sense_buf) +{ + struct ata_port *ap = dev->ap; + struct ata_taskfile tf; + u8 cdb[ATAPI_CDB_LEN]; + + DPRINTK("ATAPI request sense\n"); + + ata_tf_init(dev, &tf); + + /* FIXME: is this needed? */ + memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); + + /* XXX: why tf_read here? */ + ap->ops->tf_read(ap, &tf); + + /* fill these in, for the case where they are -not- overwritten */ + sense_buf[0] = 0x70; + sense_buf[2] = tf.feature >> 4; + + memset(cdb, 0, ATAPI_CDB_LEN); + cdb[0] = REQUEST_SENSE; + cdb[4] = SCSI_SENSE_BUFFERSIZE; + + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + + /* is it pointless to prefer PIO for "safety reasons"? */ + if (ap->flags & ATA_FLAG_PIO_DMA) { + tf.protocol = ATA_PROT_ATAPI_DMA; + tf.feature |= ATAPI_PKT_DMA; + } else { + tf.protocol = ATA_PROT_ATAPI; + tf.lbam = (8 * 1024) & 0xff; + tf.lbah = (8 * 1024) >> 8; + } + + return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, + sense_buf, SCSI_SENSE_BUFFERSIZE); +} + +/** + * ata_eh_analyze_serror - analyze SError for a failed port + * @ap: ATA port to analyze SError for + * + * Analyze SError if available and further determine cause of + * failure. + * + * LOCKING: + * None. + */ +static void ata_eh_analyze_serror(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + u32 serror = ehc->i.serror; + unsigned int err_mask = 0, action = 0; + + if (serror & SERR_PERSISTENT) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_HARDRESET; + } + if (serror & + (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + } + if (serror & SERR_PROTOCOL) { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_SOFTRESET; + } + if (serror & SERR_INTERNAL) { + err_mask |= AC_ERR_SYSTEM; + action |= ATA_EH_SOFTRESET; + } + if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) + ata_ehi_hotplugged(&ehc->i); + + ehc->i.err_mask |= err_mask; + ehc->i.action |= action; +} + +/** + * ata_eh_analyze_ncq_error - analyze NCQ error + * @ap: ATA port to analyze NCQ error for + * + * Read log page 10h, determine the offending qc and acquire + * error status TF. For NCQ device errors, all LLDDs have to do + * is setting AC_ERR_DEV in ehi->err_mask. This function takes + * care of the rest. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_analyze_ncq_error(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev = ap->device; + struct ata_queued_cmd *qc; + struct ata_taskfile tf; + int tag, rc; + + /* if frozen, we can't do much */ + if (ap->flags & ATA_FLAG_FROZEN) + return; + + /* is it NCQ device error? */ + if (!ap->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) + return; + + /* has LLDD analyzed already? */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) + return; + } + + /* okay, this error is ours */ + rc = ata_eh_read_log_10h(dev, &tag, &tf); + if (rc) { + ata_port_printk(ap, KERN_ERR, "failed to read log page 10h " + "(errno=%d)\n", rc); + return; + } + + if (!(ap->sactive & (1 << tag))) { + ata_port_printk(ap, KERN_ERR, "log page 10h reported " + "inactive tag %d\n", tag); + return; + } + + /* we've got the perpetrator, condemn it */ + qc = __ata_qc_from_tag(ap, tag); + memcpy(&qc->result_tf, &tf, sizeof(tf)); + qc->err_mask |= AC_ERR_DEV; + ehc->i.err_mask &= ~AC_ERR_DEV; +} + +/** + * ata_eh_analyze_tf - analyze taskfile of a failed qc + * @qc: qc to analyze + * @tf: Taskfile registers to analyze + * + * Analyze taskfile of @qc and further determine cause of + * failure. This function also requests ATAPI sense data if + * avaliable. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * Determined recovery action + */ +static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, + const struct ata_taskfile *tf) +{ + unsigned int tmp, action = 0; + u8 stat = tf->command, err = tf->feature; + + if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) { + qc->err_mask |= AC_ERR_HSM; + return ATA_EH_SOFTRESET; + } + + if (!(qc->err_mask & AC_ERR_DEV)) + return 0; + + switch (qc->dev->class) { + case ATA_DEV_ATA: + if (err & ATA_ICRC) + qc->err_mask |= AC_ERR_ATA_BUS; + if (err & ATA_UNC) + qc->err_mask |= AC_ERR_MEDIA; + if (err & ATA_IDNF) + qc->err_mask |= AC_ERR_INVALID; + break; + + case ATA_DEV_ATAPI: + tmp = atapi_eh_request_sense(qc->dev, + qc->scsicmd->sense_buffer); + if (!tmp) { + /* ATA_QCFLAG_SENSE_VALID is used to tell + * atapi_qc_complete() that sense data is + * already valid. + * + * TODO: interpret sense data and set + * appropriate err_mask. + */ + qc->flags |= ATA_QCFLAG_SENSE_VALID; + } else + qc->err_mask |= tmp; + } + + if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS)) + action |= ATA_EH_SOFTRESET; + + return action; +} + +static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent) +{ + if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT)) + return 1; + + if (ent->is_io) { + if (ent->err_mask & AC_ERR_HSM) + return 1; + if ((ent->err_mask & + (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) + return 2; + } + + return 0; +} + +struct speed_down_needed_arg { + u64 since; + int nr_errors[3]; +}; + +static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg) +{ + struct speed_down_needed_arg *arg = void_arg; + + if (ent->timestamp < arg->since) + return -1; + + arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++; + return 0; +} + +/** + * ata_eh_speed_down_needed - Determine wheter speed down is necessary + * @dev: Device of interest + * + * This function examines error ring of @dev and determines + * whether speed down is necessary. Speed down is necessary if + * there have been more than 3 of Cat-1 errors or 10 of Cat-2 + * errors during last 15 minutes. + * + * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM + * violation for known supported commands. + * + * Cat-2 errors are unclassified DEV error for known supported + * command. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if speed down is necessary, 0 otherwise + */ +static int ata_eh_speed_down_needed(struct ata_device *dev) +{ + const u64 interval = 15LLU * 60 * HZ; + static const int err_limits[3] = { -1, 3, 10 }; + struct speed_down_needed_arg arg; + struct ata_ering_entry *ent; + int err_cat; + u64 j64; + + ent = ata_ering_top(&dev->ering); + if (!ent) + return 0; + + err_cat = ata_eh_categorize_ering_entry(ent); + if (err_cat == 0) + return 0; + + memset(&arg, 0, sizeof(arg)); + + j64 = get_jiffies_64(); + if (j64 >= interval) + arg.since = j64 - interval; + else + arg.since = 0; + + ata_ering_map(&dev->ering, speed_down_needed_cb, &arg); + + return arg.nr_errors[err_cat] > err_limits[err_cat]; +} + +/** + * ata_eh_speed_down - record error and speed down if necessary + * @dev: Failed device + * @is_io: Did the device fail during normal IO? + * @err_mask: err_mask of the error + * + * Record error and examine error history to determine whether + * adjusting transmission speed is necessary. It also sets + * transmission limits appropriately if such adjustment is + * necessary. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_speed_down(struct ata_device *dev, int is_io, + unsigned int err_mask) +{ + if (!err_mask) + return 0; + + /* record error and determine whether speed down is necessary */ + ata_ering_record(&dev->ering, is_io, err_mask); + + if (!ata_eh_speed_down_needed(dev)) + return 0; + + /* speed down SATA link speed if possible */ + if (sata_down_spd_limit(dev->ap) == 0) + return ATA_EH_HARDRESET; + + /* lower transfer mode */ + if (ata_down_xfermask_limit(dev, 0) == 0) + return ATA_EH_SOFTRESET; + + ata_dev_printk(dev, KERN_ERR, + "speed down requested but no transfer mode left\n"); + return 0; +} + +/** + * ata_eh_autopsy - analyze error and determine recovery action + * @ap: ATA port to perform autopsy on + * + * Analyze why @ap failed and determine which recovery action is + * needed. This function also sets more detailed AC_ERR_* values + * and fills sense data for ATAPI CHECK SENSE. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_autopsy(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned int action = ehc->i.action; + struct ata_device *failed_dev = NULL; + unsigned int all_err_mask = 0; + int tag, is_io = 0; + u32 serror; + int rc; + + DPRINTK("ENTER\n"); + + /* obtain and analyze SError */ + rc = sata_scr_read(ap, SCR_ERROR, &serror); + if (rc == 0) { + ehc->i.serror |= serror; + ata_eh_analyze_serror(ap); + } else if (rc != -EOPNOTSUPP) + action |= ATA_EH_HARDRESET; + + /* analyze NCQ failure */ + ata_eh_analyze_ncq_error(ap); + + /* any real error trumps AC_ERR_OTHER */ + if (ehc->i.err_mask & ~AC_ERR_OTHER) + ehc->i.err_mask &= ~AC_ERR_OTHER; + + all_err_mask |= ehc->i.err_mask; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + /* inherit upper level err_mask */ + qc->err_mask |= ehc->i.err_mask; + + /* analyze TF */ + action |= ata_eh_analyze_tf(qc, &qc->result_tf); + + /* DEV errors are probably spurious in case of ATA_BUS error */ + if (qc->err_mask & AC_ERR_ATA_BUS) + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA | + AC_ERR_INVALID); + + /* any real error trumps unknown error */ + if (qc->err_mask & ~AC_ERR_OTHER) + qc->err_mask &= ~AC_ERR_OTHER; + + /* SENSE_VALID trumps dev/unknown error and revalidation */ + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); + action &= ~ATA_EH_REVALIDATE; + } + + /* accumulate error info */ + failed_dev = qc->dev; + all_err_mask |= qc->err_mask; + if (qc->flags & ATA_QCFLAG_IO) + is_io = 1; + } + + /* enforce default EH actions */ + if (ap->flags & ATA_FLAG_FROZEN || + all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) + action |= ATA_EH_SOFTRESET; + else if (all_err_mask) + action |= ATA_EH_REVALIDATE; + + /* if we have offending qcs and the associated failed device */ + if (failed_dev) { + /* speed down */ + action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask); + + /* perform per-dev EH action only on the offending device */ + ehc->i.dev_action[failed_dev->devno] |= + action & ATA_EH_PERDEV_MASK; + action &= ~ATA_EH_PERDEV_MASK; + } + + /* record autopsy result */ + ehc->i.dev = failed_dev; + ehc->i.action = action; + + DPRINTK("EXIT\n"); +} + +/** + * ata_eh_report - report error handling to user + * @ap: ATA port EH is going on + * + * Report EH to user. + * + * LOCKING: + * None. + */ +static void ata_eh_report(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const char *frozen, *desc; + int tag, nr_failed = 0; + + desc = NULL; + if (ehc->i.desc[0] != '\0') + desc = ehc->i.desc; + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) + continue; + + nr_failed++; + } + + if (!nr_failed && !ehc->i.err_mask) + return; + + frozen = ""; + if (ap->flags & ATA_FLAG_FROZEN) + frozen = " frozen"; + + if (ehc->i.dev) { + ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ap->sactive, ehc->i.serror, + ehc->i.action, frozen); + if (desc) + ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc); + } else { + ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s\n", + ehc->i.err_mask, ap->sactive, ehc->i.serror, + ehc->i.action, frozen); + if (desc) + ata_port_printk(ap, KERN_ERR, "(%s)\n", desc); + } + + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask) + continue; + + ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x " + "Emask 0x%x stat 0x%x err 0x%x (%s)\n", + qc->tag, qc->tf.command, qc->err_mask, + qc->result_tf.command, qc->result_tf.feature, + ata_err_string(qc->err_mask)); + } +} + +static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, + unsigned int *classes) +{ + int i, rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + rc = reset(ap, classes); + if (rc) + return rc; + + /* If any class isn't ATA_DEV_UNKNOWN, consider classification + * is complete and convert all ATA_DEV_UNKNOWN to + * ATA_DEV_NONE. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] != ATA_DEV_UNKNOWN) + break; + + if (i < ATA_MAX_DEVICES) + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + return 0; +} + +static int ata_eh_followup_srst_needed(int rc, int classify, + const unsigned int *classes) +{ + if (rc == -EAGAIN) + return 1; + if (rc != 0) + return 0; + if (classify && classes[0] == ATA_DEV_UNKNOWN) + return 1; + return 0; +} + +static int ata_eh_reset(struct ata_port *ap, int classify, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned int *classes = ehc->classes; + int tries = ATA_EH_RESET_TRIES; + int verbose = !(ap->flags & ATA_FLAG_LOADING); + unsigned int action; + ata_reset_fn_t reset; + int i, did_followup_srst, rc; + + /* Determine which reset to use and record in ehc->i.action. + * prereset() may examine and modify it. + */ + action = ehc->i.action; + ehc->i.action &= ~ATA_EH_RESET_MASK; + if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && + !(action & ATA_EH_HARDRESET)))) + ehc->i.action |= ATA_EH_SOFTRESET; + else + ehc->i.action |= ATA_EH_HARDRESET; + + if (prereset) { + rc = prereset(ap); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "prereset failed (errno=%d)\n", rc); + return rc; + } + } + + /* prereset() might have modified ehc->i.action */ + if (ehc->i.action & ATA_EH_HARDRESET) + reset = hardreset; + else if (ehc->i.action & ATA_EH_SOFTRESET) + reset = softreset; + else { + /* prereset told us not to reset, bang classes and return */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_NONE; + return 0; + } + + /* did prereset() screw up? if so, fix up to avoid oopsing */ + if (!reset) { + ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested " + "invalid reset type\n"); + if (softreset) + reset = softreset; + else + reset = hardreset; + } + + retry: + /* shut up during boot probing */ + if (verbose) + ata_port_printk(ap, KERN_INFO, "%s resetting port\n", + reset == softreset ? "soft" : "hard"); + + /* reset */ + ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); + ehc->i.flags |= ATA_EHI_DID_RESET; + + rc = ata_do_reset(ap, reset, classes); + + did_followup_srst = 0; + if (reset == hardreset && + ata_eh_followup_srst_needed(rc, classify, classes)) { + /* okay, let's do follow-up softreset */ + did_followup_srst = 1; + reset = softreset; + + if (!reset) { + ata_port_printk(ap, KERN_ERR, + "follow-up softreset required " + "but no softreset avaliable\n"); + return -EINVAL; + } + + ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); + rc = ata_do_reset(ap, reset, classes); + + if (rc == 0 && classify && + classes[0] == ATA_DEV_UNKNOWN) { + ata_port_printk(ap, KERN_ERR, + "classification failed\n"); + return -EINVAL; + } + } + + if (rc && --tries) { + const char *type; + + if (reset == softreset) { + if (did_followup_srst) + type = "follow-up soft"; + else + type = "soft"; + } else + type = "hard"; + + ata_port_printk(ap, KERN_WARNING, + "%sreset failed, retrying in 5 secs\n", type); + ssleep(5); + + if (reset == hardreset) + sata_down_spd_limit(ap); + if (hardreset) + reset = hardreset; + goto retry; + } + + if (rc == 0) { + /* After the reset, the device state is PIO 0 and the + * controller state is undefined. Record the mode. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->device[i].pio_mode = XFER_PIO_0; + + if (postreset) + postreset(ap, classes); + + /* reset successful, schedule revalidation */ + ata_eh_done(ap, NULL, ATA_EH_RESET_MASK); + ehc->i.action |= ATA_EH_REVALIDATE; + } + + return rc; +} + +static int ata_eh_revalidate_and_attach(struct ata_port *ap, + struct ata_device **r_failed_dev) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev; + unsigned long flags; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action; + + dev = &ap->device[i]; + action = ehc->i.action | ehc->i.dev_action[dev->devno]; + + if (action & ATA_EH_REVALIDATE && ata_dev_enabled(dev)) { + if (ata_port_offline(ap)) { + rc = -EIO; + break; + } + + ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); + rc = ata_dev_revalidate(dev, + ehc->i.flags & ATA_EHI_DID_RESET); + if (rc) + break; + + ata_eh_done(ap, dev, ATA_EH_REVALIDATE); + + /* schedule the scsi_rescan_device() here */ + queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); + } else if (dev->class == ATA_DEV_UNKNOWN && + ehc->tries[dev->devno] && + ata_class_enabled(ehc->classes[dev->devno])) { + dev->class = ehc->classes[dev->devno]; + + rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); + if (rc == 0) + rc = ata_dev_configure(dev, 1); + + if (rc) { + dev->class = ATA_DEV_UNKNOWN; + break; + } + + spin_lock_irqsave(ap->lock, flags); + ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + spin_unlock_irqrestore(ap->lock, flags); + } + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return rc; +} + +static int ata_port_nr_enabled(struct ata_port *ap) +{ + int i, cnt = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) + cnt++; + return cnt; +} + +static int ata_port_nr_vacant(struct ata_port *ap) +{ + int i, cnt = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ap->device[i].class == ATA_DEV_UNKNOWN) + cnt++; + return cnt; +} + +static int ata_eh_skip_recovery(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + int i; + + if (ap->flags & ATA_FLAG_FROZEN || ata_port_nr_enabled(ap)) + return 0; + + /* skip if class codes for all vacant slots are ATA_DEV_NONE */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + + if (dev->class == ATA_DEV_UNKNOWN && + ehc->classes[dev->devno] != ATA_DEV_NONE) + return 0; + } + + return 1; +} + +/** + * ata_eh_recover - recover host port after error + * @ap: host port to recover + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * This is the alpha and omega, eum and yang, heart and soul of + * libata exception handling. On entry, actions required to + * recover the port and hotplug requests are recorded in + * eh_context. This function executes all the operations with + * appropriate retrials and fallbacks to resurrect failed + * devices, detach goners and greet newcomers. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + struct ata_eh_context *ehc = &ap->eh_context; + struct ata_device *dev; + int down_xfermask, i, rc; + + DPRINTK("ENTER\n"); + + /* prep for recovery */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + + /* process hotplug request */ + if (dev->flags & ATA_DFLAG_DETACH) + ata_eh_detach_dev(dev); + + if (!ata_dev_enabled(dev) && + ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno)))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } + } + + retry: + down_xfermask = 0; + rc = 0; + + /* if UNLOADING, finish immediately */ + if (ap->flags & ATA_FLAG_UNLOADING) + goto out; + + /* skip EH if possible. */ + if (ata_eh_skip_recovery(ap)) + ehc->i.action = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ehc->classes[i] = ATA_DEV_UNKNOWN; + + /* reset */ + if (ehc->i.action & ATA_EH_RESET_MASK) { + ata_eh_freeze_port(ap); + + rc = ata_eh_reset(ap, ata_port_nr_vacant(ap), prereset, + softreset, hardreset, postreset); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "reset failed, giving up\n"); + goto out; + } + + ata_eh_thaw_port(ap); + } + + /* revalidate existing devices and attach new ones */ + rc = ata_eh_revalidate_and_attach(ap, &dev); + if (rc) + goto dev_fail; + + /* configure transfer mode if the port has been reset */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto dev_fail; + } + } + + goto out; + + dev_fail: + switch (rc) { + case -ENODEV: + /* device missing, schedule probing */ + ehc->i.probe_mask |= (1 << dev->devno); + case -EINVAL: + ehc->tries[dev->devno] = 0; + break; + case -EIO: + sata_down_spd_limit(ap); + default: + ehc->tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1)) + ehc->tries[dev->devno] = 0; + } + + if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { + /* disable device if it has used up all its chances */ + ata_dev_disable(dev); + + /* detach if offline */ + if (ata_port_offline(ap)) + ata_eh_detach_dev(dev); + + /* probe if requested */ + if ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } + } else { + /* soft didn't work? be haaaaard */ + if (ehc->i.flags & ATA_EHI_DID_RESET) + ehc->i.action |= ATA_EH_HARDRESET; + else + ehc->i.action |= ATA_EH_SOFTRESET; + } + + if (ata_port_nr_enabled(ap)) { + ata_port_printk(ap, KERN_WARNING, "failed to recover some " + "devices, retrying in 5 secs\n"); + ssleep(5); + } else { + /* no device left, repeat fast */ + msleep(500); + } + + goto retry; + + out: + if (rc) { + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_disable(&ap->device[i]); + } + + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * ata_eh_finish - finish up EH + * @ap: host port to finish EH for + * + * Recovery is complete. Clean up EH states and retry or finish + * failed qcs. + * + * LOCKING: + * None. + */ +static void ata_eh_finish(struct ata_port *ap) +{ + int tag; + + /* retry or finish qcs */ + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (!(qc->flags & ATA_QCFLAG_FAILED)) + continue; + + if (qc->err_mask) { + /* FIXME: Once EH migration is complete, + * generate sense data in this function, + * considering both err_mask and tf. + */ + if (qc->err_mask & AC_ERR_INVALID) + ata_eh_qc_complete(qc); + else + ata_eh_qc_retry(qc); + } else { + if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + ata_eh_qc_complete(qc); + } else { + /* feed zero TF to sense generation */ + memset(&qc->result_tf, 0, sizeof(qc->result_tf)); + ata_eh_qc_retry(qc); + } + } + } +} + +/** + * ata_do_eh - do standard error handling + * @ap: host port to handle error for + * @prereset: prereset method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * + * Perform standard error handling sequence. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset) +{ + if (!(ap->flags & ATA_FLAG_LOADING)) { + ata_eh_autopsy(ap); + ata_eh_report(ap); + } + + ata_eh_recover(ap, prereset, softreset, hardreset, postreset); + ata_eh_finish(ap); +} diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index f1e129b7c972..93d18a74c401 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -51,10 +52,14 @@ #define SECTOR_SIZE 512 typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); -static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); -static void ata_scsi_error(struct Scsi_Host *host); -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun); + #define RW_RECOVERY_MPAGE 0x1 #define RW_RECOVERY_MPAGE_LEN 12 @@ -102,6 +107,7 @@ static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { struct scsi_transport_template ata_scsi_transport_template = { .eh_strategy_handler = ata_scsi_error, .eh_timed_out = ata_scsi_timed_out, + .user_scan = ata_scsi_user_scan, }; @@ -304,7 +310,6 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) /** * ata_scsi_qc_new - acquire new ata_queued_cmd reference - * @ap: ATA port to which the new command is attached * @dev: ATA device to which the new command is attached * @cmd: SCSI command that originated this ATA command * @done: SCSI command completion function @@ -323,14 +328,13 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) * RETURNS: * Command allocated, or %NULL if none available. */ -struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap, - struct ata_device *dev, +struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_queued_cmd *qc; - qc = ata_qc_new_init(ap, dev); + qc = ata_qc_new_init(dev); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -397,18 +401,18 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) int ata_scsi_device_resume(struct scsi_device *sdev) { - struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0]; - struct ata_device *dev = &ap->device[sdev->id]; + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); - return ata_device_resume(ap, dev); + return ata_device_resume(dev); } int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) { - struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0]; - struct ata_device *dev = &ap->device[sdev->id]; + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); - return ata_device_suspend(ap, dev, state); + return ata_device_suspend(dev, state); } /** @@ -419,6 +423,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) * @sk: the sense key we'll fill out * @asc: the additional sense code we'll fill out * @ascq: the additional sense code qualifier we'll fill out + * @verbose: be verbose * * Converts an ATA error into a SCSI error. Fill out pointers to * SK, ASC, and ASCQ bytes for later use in fixed or descriptor @@ -428,7 +433,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) * spin_lock_irqsave(host_set lock) */ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, - u8 *ascq) + u8 *ascq, int verbose) { int i; @@ -493,8 +498,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, } } /* No immediate match */ - printk(KERN_WARNING "ata%u: no sense translation for " - "error 0x%02x\n", id, drv_err); + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); } /* Fall back to interpreting status bits */ @@ -507,8 +513,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, } } /* No error? Undecoded? */ - printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", - id, drv_stat); + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "status: 0x%02x\n", id, drv_stat); /* We need a sensible error return here, which is tricky, and one that won't cause people to do things like return a disk wrongly */ @@ -517,9 +524,10 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, *ascq = 0x00; translate_done: - printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to " - "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err, - *sk, *asc, *ascq); + if (verbose) + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " + "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", + id, drv_stat, drv_err, *sk, *asc, *ascq); return; } @@ -539,27 +547,23 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->tf; + struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; unsigned char *desc = sb + 8; + int verbose = qc->ap->ops->error_handler == NULL; memset(sb, 0, SCSI_SENSE_BUFFERSIZE); cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* - * Read the controller registers. - */ - WARN_ON(qc->ap->ops->tf_read == NULL); - qc->ap->ops->tf_read(qc->ap, tf); - /* * Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq. */ - if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[1], &sb[2], &sb[3]); + &sb[1], &sb[2], &sb[3], verbose); sb[1] &= 0x0f; } @@ -615,26 +619,22 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) void ata_gen_fixed_sense(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->tf; + struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; + int verbose = qc->ap->ops->error_handler == NULL; memset(sb, 0, SCSI_SENSE_BUFFERSIZE); cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* - * Read the controller registers. - */ - WARN_ON(qc->ap->ops->tf_read == NULL); - qc->ap->ops->tf_read(qc->ap, tf); - /* * Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq. */ - if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[2], &sb[12], &sb[13]); + &sb[2], &sb[12], &sb[13], verbose); sb[2] &= 0x0f; } @@ -677,7 +677,7 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, */ max_sectors = ATA_MAX_SECTORS; if (dev->flags & ATA_DFLAG_LBA48) - max_sectors = 2048; + max_sectors = ATA_MAX_SECTORS_LBA48; if (dev->max_sectors) max_sectors = dev->max_sectors; @@ -692,6 +692,14 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, request_queue_t *q = sdev->request_queue; blk_queue_max_hw_segments(q, q->max_hw_segments - 1); } + + if (dev->flags & ATA_DFLAG_NCQ) { + int depth; + + depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + depth = min(ATA_MAX_QUEUE - 1, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); + } } /** @@ -708,152 +716,88 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, int ata_scsi_slave_config(struct scsi_device *sdev) { + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + ata_scsi_sdev_config(sdev); blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); - if (sdev->id < ATA_MAX_DEVICES) { - struct ata_port *ap; - struct ata_device *dev; - - ap = (struct ata_port *) &sdev->host->hostdata[0]; - dev = &ap->device[sdev->id]; - + if (dev) ata_scsi_dev_config(sdev, dev); - } return 0; /* scsi layer doesn't check return value, sigh */ } /** - * ata_scsi_timed_out - SCSI layer time out callback - * @cmd: timed out SCSI command + * ata_scsi_slave_destroy - SCSI device is about to be destroyed + * @sdev: SCSI device to be destroyed * - * Handles SCSI layer timeout. We race with normal completion of - * the qc for @cmd. If the qc is already gone, we lose and let - * the scsi command finish (EH_HANDLED). Otherwise, the qc has - * timed out and EH should be invoked. Prevent ata_qc_complete() - * from finishing it by setting EH_SCHEDULED and return - * EH_NOT_HANDLED. + * @sdev is about to be destroyed for hot/warm unplugging. If + * this unplugging was initiated by libata as indicated by NULL + * dev->sdev, this function doesn't have to do anything. + * Otherwise, SCSI layer initiated warm-unplug is in progress. + * Clear dev->sdev, schedule the device for ATA detach and invoke + * EH. * * LOCKING: - * Called from timer context + * Defined by SCSI layer. We don't really care. + */ +void ata_scsi_slave_destroy(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + unsigned long flags; + struct ata_device *dev; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + dev = __ata_scsi_find_dev(ap, sdev); + if (dev && dev->sdev) { + /* SCSI device already in CANCEL state, no need to offline it */ + dev->sdev = NULL; + dev->flags |= ATA_DFLAG_DETACH; + ata_port_schedule_eh(ap); + } + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_scsi_change_queue_depth - SCSI callback for queue depth config + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * + * This is libata standard hostt->change_queue_depth callback. + * SCSI will call into this callback when user tries to set queue + * depth via sysfs. + * + * LOCKING: + * SCSI layer (we don't care) * * RETURNS: - * EH_HANDLED or EH_NOT_HANDLED + * Newly configured queue depth. */ -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) { - struct Scsi_Host *host = cmd->device->host; - struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; - unsigned long flags; - struct ata_queued_cmd *qc; - enum scsi_eh_timer_return ret = EH_HANDLED; + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev; + int max_depth; - DPRINTK("ENTER\n"); + if (queue_depth < 1) + return sdev->queue_depth; - spin_lock_irqsave(&ap->host_set->lock, flags); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - WARN_ON(qc->scsicmd != cmd); - qc->flags |= ATA_QCFLAG_EH_SCHEDULED; - qc->err_mask |= AC_ERR_TIMEOUT; - ret = EH_NOT_HANDLED; - } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + dev = ata_scsi_find_dev(ap, sdev); + if (!dev || !ata_dev_enabled(dev)) + return sdev->queue_depth; - DPRINTK("EXIT, ret=%d\n", ret); - return ret; -} + max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + max_depth = min(ATA_MAX_QUEUE - 1, max_depth); + if (queue_depth > max_depth) + queue_depth = max_depth; -/** - * ata_scsi_error - SCSI layer error handler callback - * @host: SCSI host on which error occurred - * - * Handles SCSI-layer-thrown error events. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -static void ata_scsi_error(struct Scsi_Host *host) -{ - struct ata_port *ap; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap = (struct ata_port *) &host->hostdata[0]; - - spin_lock_irqsave(&ap->host_set->lock, flags); - WARN_ON(ap->flags & ATA_FLAG_IN_EH); - ap->flags |= ATA_FLAG_IN_EH; - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - ata_port_flush_task(ap); - - ap->ops->eng_timeout(ap); - - WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); - - scsi_eh_flush_done_q(&ap->eh_done_q); - - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_IN_EH; - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - DPRINTK("EXIT\n"); -} - -static void ata_eh_scsidone(struct scsi_cmnd *scmd) -{ - /* nada */ -} - -static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scsi_cmnd *scmd = qc->scsicmd; - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - qc->scsidone = ata_eh_scsidone; - __ata_qc_complete(qc); - WARN_ON(ata_tag_valid(qc->tag)); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); -} - -/** - * ata_eh_qc_complete - Complete an active ATA command from EH - * @qc: Command to complete - * - * Indicate to the mid and upper layers that an ATA command has - * completed. To be used from EH. - */ -void ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - scmd->retries = scmd->allowed; - __ata_eh_qc_complete(qc); -} - -/** - * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH - * @qc: Command to retry - * - * Indicate to the mid and upper layers that an ATA command - * should be retried. To be used from EH. - * - * SCSI midlayer limits the number of retries to scmd->allowed. - * This function might need to adjust scmd->retries for commands - * which get retried due to unrelated NCQ failures. - */ -void ata_eh_qc_retry(struct ata_queued_cmd *qc) -{ - __ata_eh_qc_complete(qc); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); + return queue_depth; } /** @@ -891,7 +835,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, tf->nsect = 1; /* 1 sector, lba=0 */ if (qc->dev->flags & ATA_DFLAG_LBA) { - qc->tf.flags |= ATA_TFLAG_LBA; + tf->flags |= ATA_TFLAG_LBA; tf->lbah = 0x0; tf->lbam = 0x0; @@ -1195,6 +1139,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm u64 block; u32 n_block; + qc->flags |= ATA_QCFLAG_IO; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || @@ -1241,7 +1186,36 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm */ goto nothing_to_do; - if (dev->flags & ATA_DFLAG_LBA) { + if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) { + /* yay, NCQ */ + if (!lba_48_ok(block, n_block)) + goto out_of_range; + + tf->protocol = ATA_PROT_NCQ; + tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + if (tf->flags & ATA_TFLAG_WRITE) + tf->command = ATA_CMD_FPDMA_WRITE; + else + tf->command = ATA_CMD_FPDMA_READ; + + qc->nsect = n_block; + + tf->nsect = qc->tag << 3; + tf->hob_feature = (n_block >> 8) & 0xff; + tf->feature = n_block & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device = 1 << 6; + if (tf->flags & ATA_TFLAG_FUA) + tf->device |= 1 << 7; + } else if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; if (lba_28_ok(block, n_block)) { @@ -1332,6 +1306,17 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) u8 *cdb = cmd->cmnd; int need_sense = (qc->err_mask != 0); + /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and + * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE + * cache + */ + if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && + ((qc->tf.feature == SETFEATURES_WC_ON) || + (qc->tf.feature == SETFEATURES_WC_OFF))) { + qc->ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(qc->ap); + } + /* For ATA pass thru (SAT) commands, generate a sense block if * user mandated it or if there's an error. Note that if we * generate because the user forced us to, a check condition @@ -1356,19 +1341,49 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } } - if (need_sense) { - /* The ata_gen_..._sense routines fill in tf */ - ata_dump_status(qc->ap->id, &qc->tf); - } + if (need_sense && !qc->ap->ops->error_handler) + ata_dump_status(qc->ap->id, &qc->result_tf); qc->scsidone(cmd); ata_qc_free(qc); } +/** + * ata_scmd_need_defer - Check whether we need to defer scmd + * @dev: ATA device to which the command is addressed + * @is_io: Is the command IO (and thus possibly NCQ)? + * + * NCQ and non-NCQ commands cannot run together. As upper layer + * only knows the queue depth, we are responsible for maintaining + * exclusion. This function checks whether a new command can be + * issued to @dev. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if deferring is needed, 0 otherwise. + */ +static int ata_scmd_need_defer(struct ata_device *dev, int is_io) +{ + struct ata_port *ap = dev->ap; + + if (!(dev->flags & ATA_DFLAG_NCQ)) + return 0; + + if (is_io) { + if (!ata_tag_valid(ap->active_tag)) + return 0; + } else { + if (!ata_tag_valid(ap->active_tag) && !ap->sactive) + return 0; + } + return 1; +} + /** * ata_scsi_translate - Translate then issue SCSI command to ATA device - * @ap: ATA port to which the command is addressed * @dev: ATA device to which the command is addressed * @cmd: SCSI command to execute * @done: SCSI command completion function @@ -1389,19 +1404,25 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command + * needs to be deferred. */ - -static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, +static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), ata_xlat_func_t xlat_func) { struct ata_queued_cmd *qc; u8 *scsicmd = cmd->cmnd; + int is_io = xlat_func == ata_scsi_rw_xlat; VPRINTK("ENTER\n"); - qc = ata_scsi_qc_new(ap, dev, cmd, done); + if (unlikely(ata_scmd_need_defer(dev, is_io))) + goto defer; + + qc = ata_scsi_qc_new(dev, cmd, done); if (!qc) goto err_mem; @@ -1409,8 +1430,8 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (cmd->sc_data_direction == DMA_FROM_DEVICE || cmd->sc_data_direction == DMA_TO_DEVICE) { if (unlikely(cmd->request_bufflen < 1)) { - printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, + "WARNING: zero len r/w req\n"); goto err_did; } @@ -1432,13 +1453,13 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, ata_qc_issue(qc); VPRINTK("EXIT\n"); - return; + return 0; early_finish: ata_qc_free(qc); done(cmd); DPRINTK("EXIT - early finish (good or error)\n"); - return; + return 0; err_did: ata_qc_free(qc); @@ -1446,7 +1467,11 @@ err_mem: cmd->result = (DID_ERROR << 16); done(cmd); DPRINTK("EXIT - internal\n"); - return; + return 0; + +defer: + DPRINTK("EXIT - defer\n"); + return SCSI_MLQUEUE_DEVICE_BUSY; } /** @@ -1944,7 +1969,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, return 0; dpofua = 0; - if (ata_dev_supports_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 && + if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) dpofua = 1 << 4; @@ -2137,13 +2162,14 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 static void atapi_sense_complete(struct ata_queued_cmd *qc) { - if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) + if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { /* FIXME: not quite right; we don't want the * translation of taskfile registers into * a sense descriptors, since that's only * correct for ATA, not ATAPI */ ata_gen_ata_desc_sense(qc); + } qc->scsidone(qc->scsicmd); ata_qc_free(qc); @@ -2207,21 +2233,38 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) VPRINTK("ENTER, err_mask 0x%X\n", err_mask); + /* handle completion from new EH */ + if (unlikely(qc->ap->ops->error_handler && + (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { + + if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into a + * sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } + + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; + qc->scsidone(cmd); + ata_qc_free(qc); + return; + } + + /* successful completion or old EH failure path */ if (unlikely(err_mask & AC_ERR_DEV)) { cmd->result = SAM_STAT_CHECK_CONDITION; atapi_request_sense(qc); return; - } - - else if (unlikely(err_mask)) + } else if (unlikely(err_mask)) { /* FIXME: not quite right; we don't want the * translation of taskfile registers into * a sense descriptors, since that's only * correct for ATA, not ATAPI */ ata_gen_ata_desc_sense(qc); - - else { + } else { u8 *scsicmd = cmd->cmnd; if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { @@ -2303,11 +2346,9 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) qc->tf.protocol = ATA_PROT_ATAPI_DMA; qc->tf.feature |= ATAPI_PKT_DMA; -#ifdef ATAPI_ENABLE_DMADIR - /* some SATA bridges need us to indicate data xfer direction */ - if (cmd->sc_data_direction != DMA_TO_DEVICE) + if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) + /* some SATA bridges need us to indicate data xfer direction */ qc->tf.feature |= ATAPI_DMADIR; -#endif } qc->nbytes = cmd->request_bufflen; @@ -2315,6 +2356,53 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) return 0; } +static struct ata_device * ata_find_dev(struct ata_port *ap, int id) +{ + if (likely(id < ATA_MAX_DEVICES)) + return &ap->device[id]; + return NULL; +} + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev) +{ + /* skip commands not addressed to targets we simulate */ + if (unlikely(scsidev->channel || scsidev->lun)) + return NULL; + + return ata_find_dev(ap, scsidev->id); +} + +/** + * ata_scsi_dev_enabled - determine if device is enabled + * @dev: ATA device + * + * Determine if commands should be sent to the specified device. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 if commands are not allowed / 1 if commands are allowed + */ + +static int ata_scsi_dev_enabled(struct ata_device *dev) +{ + if (unlikely(!ata_dev_enabled(dev))) + return 0; + + if (!atapi_enabled || (dev->ap->flags & ATA_FLAG_NO_ATAPI)) { + if (unlikely(dev->class == ATA_DEV_ATAPI)) { + ata_dev_printk(dev, KERN_WARNING, + "WARNING: ATAPI is %s, device ignored.\n", + atapi_enabled ? "not supported with this driver" : "disabled"); + return 0; + } + } + + return 1; +} + /** * ata_scsi_find_dev - lookup ata_device from scsi_cmnd * @ap: ATA port to which the device is attached @@ -2331,33 +2419,14 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) * RETURNS: * Associated ATA device, or %NULL if not found. */ - static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { - struct ata_device *dev; + struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); - /* skip commands not addressed to targets we simulate */ - if (likely(scsidev->id < ATA_MAX_DEVICES)) - dev = &ap->device[scsidev->id]; - else + if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) return NULL; - if (unlikely((scsidev->channel != 0) || - (scsidev->lun != 0))) - return NULL; - - if (unlikely(!ata_dev_present(dev))) - return NULL; - - if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) { - if (unlikely(dev->class == ATA_DEV_ATAPI)) { - printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n", - ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled"); - return NULL; - } - } - return dev; } @@ -2414,10 +2483,15 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &(qc->tf); struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_device *dev = qc->dev; if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; + /* We may not issue DMA commands if no DMA mode is set */ + if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) + goto invalid_fld; + if (scsicmd[1] & 0xe0) /* PIO multi not supported yet */ goto invalid_fld; @@ -2502,6 +2576,9 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) */ qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE; + /* request result TF */ + qc->flags |= ATA_QCFLAG_RESULT_TF; + return 0; invalid_fld: @@ -2578,19 +2655,24 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, #endif } -static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), - struct ata_port *ap, struct ata_device *dev) +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + struct ata_device *dev) { + int rc = 0; + if (dev->class == ATA_DEV_ATA) { ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, cmd->cmnd[0]); if (xlat_func) - ata_scsi_translate(ap, dev, cmd, done, xlat_func); + rc = ata_scsi_translate(dev, cmd, done, xlat_func); else - ata_scsi_simulate(ap, dev, cmd, done); + ata_scsi_simulate(dev, cmd, done); } else - ata_scsi_translate(ap, dev, cmd, done, atapi_xlat); + rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); + + return rc; } /** @@ -2609,39 +2691,39 @@ static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struc * Releases scsi-layer-held lock, and obtains host_set lock. * * RETURNS: - * Zero. + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. */ - int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_port *ap; struct ata_device *dev; struct scsi_device *scsidev = cmd->device; struct Scsi_Host *shost = scsidev->host; + int rc = 0; - ap = (struct ata_port *) &shost->hostdata[0]; + ap = ata_shost_to_port(shost); spin_unlock(shost->host_lock); - spin_lock(&ap->host_set->lock); + spin_lock(ap->lock); ata_scsi_dump_cdb(ap, cmd); dev = ata_scsi_find_dev(ap, scsidev); if (likely(dev)) - __ata_scsi_queuecmd(cmd, done, ap, dev); + rc = __ata_scsi_queuecmd(cmd, done, dev); else { cmd->result = (DID_BAD_TARGET << 16); done(cmd); } - spin_unlock(&ap->host_set->lock); + spin_unlock(ap->lock); spin_lock(shost->host_lock); - return 0; + return rc; } /** * ata_scsi_simulate - simulate SCSI command on ATA device - * @ap: port the device is connected to * @dev: the target device * @cmd: SCSI command being sent to device. * @done: SCSI command completion function. @@ -2653,14 +2735,12 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) * spin_lock_irqsave(host_set lock) */ -void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, +void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_scsi_args args; const u8 *scsicmd = cmd->cmnd; - args.ap = ap; args.dev = dev; args.id = dev->id; args.cmd = cmd; @@ -2732,17 +2812,241 @@ void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, void ata_scsi_scan_host(struct ata_port *ap) { - struct ata_device *dev; unsigned int i; - if (ap->flags & ATA_FLAG_PORT_DISABLED) + if (ap->flags & ATA_FLAG_DISABLED) return; + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + struct scsi_device *sdev; + + if (!ata_dev_enabled(dev) || dev->sdev) + continue; + + sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); + if (!IS_ERR(sdev)) { + dev->sdev = sdev; + scsi_device_put(sdev); + } + } +} + +/** + * ata_scsi_offline_dev - offline attached SCSI device + * @dev: ATA device to offline attached SCSI device for + * + * This function is called from ata_eh_hotplug() and responsible + * for taking the SCSI device attached to @dev offline. This + * function is called with host_set lock which protects dev->sdev + * against clearing. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if attached SCSI device exists, 0 otherwise. + */ +int ata_scsi_offline_dev(struct ata_device *dev) +{ + if (dev->sdev) { + scsi_device_set_state(dev->sdev, SDEV_OFFLINE); + return 1; + } + return 0; +} + +/** + * ata_scsi_remove_dev - remove attached SCSI device + * @dev: ATA device to remove attached SCSI device for + * + * This function is called from ata_eh_scsi_hotplug() and + * responsible for removing the SCSI device attached to @dev. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_scsi_remove_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct scsi_device *sdev; + unsigned long flags; + + /* Alas, we need to grab scan_mutex to ensure SCSI device + * state doesn't change underneath us and thus + * scsi_device_get() always succeeds. The mutex locking can + * be removed if there is __scsi_device_get() interface which + * increments reference counts regardless of device state. + */ + mutex_lock(&ap->host->scan_mutex); + spin_lock_irqsave(ap->lock, flags); + + /* clearing dev->sdev is protected by host_set lock */ + sdev = dev->sdev; + dev->sdev = NULL; + + if (sdev) { + /* If user initiated unplug races with us, sdev can go + * away underneath us after the host_set lock and + * scan_mutex are released. Hold onto it. + */ + if (scsi_device_get(sdev) == 0) { + /* The following ensures the attached sdev is + * offline on return from ata_scsi_offline_dev() + * regardless it wins or loses the race + * against this function. + */ + scsi_device_set_state(sdev, SDEV_OFFLINE); + } else { + WARN_ON(1); + sdev = NULL; + } + } + + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->host->scan_mutex); + + if (sdev) { + ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", + sdev->sdev_gendev.bus_id); + + scsi_remove_device(sdev); + scsi_device_put(sdev); + } +} + +/** + * ata_scsi_hotplug - SCSI part of hotplug + * @data: Pointer to ATA port to perform SCSI hotplug on + * + * Perform SCSI part of hotplug. It's executed from a separate + * workqueue after EH completes. This is necessary because SCSI + * hot plugging requires working EH and hot unplugging is + * synchronized with hot plugging with a mutex. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_hotplug(void *data) +{ + struct ata_port *ap = data; + int i; + + if (ap->flags & ATA_FLAG_UNLOADING) { + DPRINTK("ENTER/EXIT - unloading\n"); + return; + } + + DPRINTK("ENTER\n"); + + /* unplug detached devices */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned long flags; + + if (!(dev->flags & ATA_DFLAG_DETACHED)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_DETACHED; + spin_unlock_irqrestore(ap->lock, flags); + + ata_scsi_remove_dev(dev); + } + + /* scan for new ones */ + ata_scsi_scan_host(ap); + + /* If we scanned while EH was in progress, scan would have + * failed silently. Requeue if there are enabled but + * unattached devices. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev) && !dev->sdev) { + queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ); + break; + } + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_scsi_user_scan - indication for user-initiated bus scan + * @shost: SCSI host to scan + * @channel: Channel to scan + * @id: ID to scan + * @lun: LUN to scan + * + * This function is called when user explicitly requests bus + * scan. Set probe pending flag and invoke EH. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Zero. + */ +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun) +{ + struct ata_port *ap = ata_shost_to_port(shost); + unsigned long flags; + int rc = 0; + + if (!ap->ops->error_handler) + return -EOPNOTSUPP; + + if ((channel != SCAN_WILD_CARD && channel != 0) || + (lun != SCAN_WILD_CARD && lun != 0)) + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + if (id == SCAN_WILD_CARD) { + ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; + ap->eh_info.action |= ATA_EH_SOFTRESET; + } else { + struct ata_device *dev = ata_find_dev(ap, id); + + if (dev) { + ap->eh_info.probe_mask |= 1 << dev->devno; + ap->eh_info.action |= ATA_EH_SOFTRESET; + } else + rc = -EINVAL; + } + + if (rc == 0) + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + return rc; +} + +/** + * ata_scsi_dev_rescan - initiate scsi_rescan_device() + * @data: Pointer to ATA port to perform scsi_rescan_device() + * + * After ATA pass thru (SAT) commands are executed successfully, + * libata need to propagate the changes to SCSI layer. This + * function must be executed from ata_aux_wq such that sdev + * attach/detach don't race with rescan. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_dev_rescan(void *data) +{ + struct ata_port *ap = data; + struct ata_device *dev; + unsigned int i; + for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; - if (ata_dev_present(dev)) - scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); + if (ata_dev_enabled(dev) && dev->sdev) + scsi_rescan_device(&(dev->sdev->sdev_gendev)); } } - diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index bac8cbae06fe..bdd488897096 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -29,10 +29,9 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.20" /* must be exactly four chars */ +#define DRV_VERSION "1.30" /* must be exactly four chars */ struct ata_scsi_args { - struct ata_port *ap; struct ata_device *dev; u16 *id; struct scsi_cmnd *cmd; @@ -40,18 +39,32 @@ struct ata_scsi_args { }; /* libata-core.c */ +extern struct workqueue_struct *ata_aux_wq; extern int atapi_enabled; +extern int atapi_dmadir; extern int libata_fua; -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, - struct ata_device *dev); +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); +extern void ata_dev_disable(struct ata_device *dev); extern void ata_port_flush_task(struct ata_port *ap); +extern unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen); +extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id); +extern int ata_dev_configure(struct ata_device *dev, int print_info); +extern int sata_down_spd_limit(struct ata_port *ap); +extern int sata_set_spd_needed(struct ata_port *ap); +extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); +extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); +extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); +extern void ata_dev_init(struct ata_device *dev); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); @@ -60,6 +73,8 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct scsi_transport_template ata_scsi_transport_template; extern void ata_scsi_scan_host(struct ata_port *ap); +extern int ata_scsi_offline_dev(struct ata_device *dev); +extern void ata_scsi_hotplug(void *data); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); @@ -88,5 +103,13 @@ extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); +extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); +extern void ata_scsi_dev_rescan(void *data); + +/* libata-eh.c */ +extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); +extern void ata_scsi_error(struct Scsi_Host *host); +extern void ata_port_wait_eh(struct ata_port *ap); +extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); #endif /* __LIBATA_H__ */ diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 5cda16cfacb0..7ebe8e03aa96 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.03" +#define DRV_VERSION "0.04" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) @@ -152,6 +152,7 @@ static struct scsi_host_template adma_ata_sht = { .proc_name = DRV_NAME, .dma_boundary = ADMA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -167,6 +168,7 @@ static const struct ata_port_operations adma_ata_ops = { .qc_prep = adma_qc_prep, .qc_issue = adma_qc_issue, .eng_timeout = adma_eng_timeout, + .data_xfer = ata_mmio_data_xfer, .irq_handler = adma_intr, .irq_clear = adma_irq_clear, .port_start = adma_port_start, @@ -455,13 +457,13 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) continue; handled = 1; adma_enter_reg_mode(ap); - if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)) + if (ap->flags & ATA_FLAG_DISABLED) continue; pp = ap->private_data; if (!pp || pp->state != adma_state_pkt) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { if ((status & (aPERR | aPSD | aUIRQ))) qc->err_mask |= AC_ERR_OTHER; else if (pp->pkt[0] != cDONE) @@ -480,13 +482,13 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) for (port_no = 0; port_no < host_set->n_ports; ++port_no) { struct ata_port *ap; ap = host_set->ports[port_no]; - if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) { + if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) { struct ata_queued_cmd *qc; struct adma_port_priv *pp = ap->private_data; if (!pp || pp->state != adma_state_mmio) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { /* check main status, clearing INTRQ */ u8 status = ata_check_status(ap); diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index f16f92a6ec0f..4a71578df3c1 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -93,7 +93,7 @@ enum { MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_NO_ATAPI), + ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING), MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, CRQB_FLAG_READ = (1 << 0), @@ -272,33 +272,33 @@ enum chip_type { /* Command ReQuest Block: 32B */ struct mv_crqb { - u32 sg_addr; - u32 sg_addr_hi; - u16 ctrl_flags; - u16 ata_cmd[11]; + __le32 sg_addr; + __le32 sg_addr_hi; + __le16 ctrl_flags; + __le16 ata_cmd[11]; }; struct mv_crqb_iie { - u32 addr; - u32 addr_hi; - u32 flags; - u32 len; - u32 ata_cmd[4]; + __le32 addr; + __le32 addr_hi; + __le32 flags; + __le32 len; + __le32 ata_cmd[4]; }; /* Command ResPonse Block: 8B */ struct mv_crpb { - u16 id; - u16 flags; - u32 tmstmp; + __le16 id; + __le16 flags; + __le32 tmstmp; }; /* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ struct mv_sg { - u32 addr; - u32 flags_size; - u32 addr_hi; - u32 reserved; + __le32 addr; + __le32 flags_size; + __le32 addr_hi; + __le32 reserved; }; struct mv_port_priv { @@ -390,6 +390,7 @@ static struct scsi_host_template mv_sht = { .proc_name = DRV_NAME, .dma_boundary = MV_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -406,6 +407,7 @@ static const struct ata_port_operations mv5_ops = { .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = mv_eng_timeout, @@ -433,6 +435,7 @@ static const struct ata_port_operations mv6_ops = { .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = mv_eng_timeout, @@ -683,7 +686,7 @@ static void mv_stop_dma(struct ata_port *ap) } if (EDMA_EN & reg) { - printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); /* FIXME: Consider doing a reset here to recover */ } } @@ -1028,7 +1031,7 @@ static inline unsigned mv_inc_q_index(unsigned index) return (index + 1) & MV_MAX_Q_DEPTH_MASK; } -static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) +static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) { u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | (last ? CRQB_CMD_LAST : 0); @@ -1051,7 +1054,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; - u16 *cw; + __le16 *cw; struct ata_taskfile *tf; u16 flags = 0; unsigned in_index; @@ -1307,8 +1310,8 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed) edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); if (EDMA_ERR_SERR & edma_err_cause) { - serr = scr_read(ap, SCR_ERROR); - scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(ap, SCR_ERROR, &serr); + sata_scr_write_flush(ap, SCR_ERROR, serr); } if (EDMA_ERR_SELF_DIS & edma_err_cause) { struct mv_port_priv *pp = ap->private_data; @@ -1377,7 +1380,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* Note that DEV_IRQ might happen spuriously during EDMA, * and should be ignored in such cases. * The cause of this is still under investigation. - */ + */ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { /* EDMA: check for response queue interrupt */ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { @@ -1398,7 +1401,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, } } - if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)) + if (ap && (ap->flags & ATA_FLAG_DISABLED)) continue; err_mask = ac_err_mask(ata_status); @@ -1419,7 +1422,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); /* mark qc status appropriately */ - if (!(qc->tf.ctl & ATA_NIEN)) { + if (!(qc->tf.flags & ATA_TFLAG_POLLING)) { qc->err_mask |= err_mask; ata_qc_complete(qc); } @@ -1949,15 +1952,16 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) /* Issue COMRESET via SControl */ comreset_retry: - scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(ap, SCR_CONTROL, 0x301); __msleep(1, can_sleep); - scr_write_flush(ap, SCR_CONTROL, 0x300); + sata_scr_write_flush(ap, SCR_CONTROL, 0x300); __msleep(20, can_sleep); timeout = jiffies + msecs_to_jiffies(200); do { - sstatus = scr_read(ap, SCR_STATUS) & 0x3; + sata_scr_read(ap, SCR_STATUS, &sstatus); + sstatus &= 0x3; if ((sstatus == 3) || (sstatus == 0)) break; @@ -1974,11 +1978,12 @@ comreset_retry: "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - if (sata_dev_present(ap)) { + if (ata_port_online(ap)) { ata_port_probe(ap); } else { - printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", - ap->id, scr_read(ap, SCR_STATUS)); + sata_scr_read(ap, SCR_STATUS, &sstatus); + ata_port_printk(ap, KERN_INFO, + "no device found (phy stat %08x)\n", sstatus); ata_port_disable(ap); return; } @@ -2005,7 +2010,7 @@ comreset_retry: tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr); dev->class = ata_dev_classify(&tf); - if (!ata_dev_present(dev)) { + if (!ata_dev_enabled(dev)) { VPRINTK("Port disabled post-sig: No device present.\n"); ata_port_disable(ap); } @@ -2037,7 +2042,7 @@ static void mv_eng_timeout(struct ata_port *ap) struct ata_queued_cmd *qc; unsigned long flags; - printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); + ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); DPRINTK("All regs @ start of eng_timeout\n"); mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, to_pci_dev(ap->host_set->dev)); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 9f553081b5e8..d18e7e0932ef 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "sata_nv" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.9" enum { NV_PORTS = 2, @@ -54,40 +54,25 @@ enum { NV_PORT0_SCR_REG_OFFSET = 0x00, NV_PORT1_SCR_REG_OFFSET = 0x40, + /* INT_STATUS/ENABLE */ NV_INT_STATUS = 0x10, - NV_INT_STATUS_CK804 = 0x440, - NV_INT_STATUS_PDEV_INT = 0x01, - NV_INT_STATUS_PDEV_PM = 0x02, - NV_INT_STATUS_PDEV_ADDED = 0x04, - NV_INT_STATUS_PDEV_REMOVED = 0x08, - NV_INT_STATUS_SDEV_INT = 0x10, - NV_INT_STATUS_SDEV_PM = 0x20, - NV_INT_STATUS_SDEV_ADDED = 0x40, - NV_INT_STATUS_SDEV_REMOVED = 0x80, - NV_INT_STATUS_PDEV_HOTPLUG = (NV_INT_STATUS_PDEV_ADDED | - NV_INT_STATUS_PDEV_REMOVED), - NV_INT_STATUS_SDEV_HOTPLUG = (NV_INT_STATUS_SDEV_ADDED | - NV_INT_STATUS_SDEV_REMOVED), - NV_INT_STATUS_HOTPLUG = (NV_INT_STATUS_PDEV_HOTPLUG | - NV_INT_STATUS_SDEV_HOTPLUG), - NV_INT_ENABLE = 0x11, + NV_INT_STATUS_CK804 = 0x440, NV_INT_ENABLE_CK804 = 0x441, - NV_INT_ENABLE_PDEV_MASK = 0x01, - NV_INT_ENABLE_PDEV_PM = 0x02, - NV_INT_ENABLE_PDEV_ADDED = 0x04, - NV_INT_ENABLE_PDEV_REMOVED = 0x08, - NV_INT_ENABLE_SDEV_MASK = 0x10, - NV_INT_ENABLE_SDEV_PM = 0x20, - NV_INT_ENABLE_SDEV_ADDED = 0x40, - NV_INT_ENABLE_SDEV_REMOVED = 0x80, - NV_INT_ENABLE_PDEV_HOTPLUG = (NV_INT_ENABLE_PDEV_ADDED | - NV_INT_ENABLE_PDEV_REMOVED), - NV_INT_ENABLE_SDEV_HOTPLUG = (NV_INT_ENABLE_SDEV_ADDED | - NV_INT_ENABLE_SDEV_REMOVED), - NV_INT_ENABLE_HOTPLUG = (NV_INT_ENABLE_PDEV_HOTPLUG | - NV_INT_ENABLE_SDEV_HOTPLUG), + /* INT_STATUS/ENABLE bits */ + NV_INT_DEV = 0x01, + NV_INT_PM = 0x02, + NV_INT_ADDED = 0x04, + NV_INT_REMOVED = 0x08, + + NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ + + NV_INT_ALL = 0x0f, + NV_INT_MASK = NV_INT_DEV | + NV_INT_ADDED | NV_INT_REMOVED, + + /* INT_CONFIG */ NV_INT_CONFIG = 0x12, NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI @@ -97,23 +82,27 @@ enum { }; static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t nv_interrupt (int irq, void *dev_instance, - struct pt_regs *regs); +static void nv_ck804_host_stop(struct ata_host_set *host_set); +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static void nv_host_stop (struct ata_host_set *host_set); -static void nv_enable_hotplug(struct ata_probe_ent *probe_ent); -static void nv_disable_hotplug(struct ata_host_set *host_set); -static int nv_check_hotplug(struct ata_host_set *host_set); -static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent); -static void nv_disable_hotplug_ck804(struct ata_host_set *host_set); -static int nv_check_hotplug_ck804(struct ata_host_set *host_set); + +static void nv_nf2_freeze(struct ata_port *ap); +static void nv_nf2_thaw(struct ata_port *ap); +static void nv_ck804_freeze(struct ata_port *ap); +static void nv_ck804_thaw(struct ata_port *ap); +static void nv_error_handler(struct ata_port *ap); enum nv_host_type { GENERIC, NFORCE2, - NFORCE3, + NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ CK804 }; @@ -140,6 +129,16 @@ static const struct pci_device_id nv_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, 0x045f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, @@ -149,46 +148,6 @@ static const struct pci_device_id nv_pci_tbl[] = { { 0, } /* terminate list */ }; -struct nv_host_desc -{ - enum nv_host_type host_type; - void (*enable_hotplug)(struct ata_probe_ent *probe_ent); - void (*disable_hotplug)(struct ata_host_set *host_set); - int (*check_hotplug)(struct ata_host_set *host_set); - -}; -static struct nv_host_desc nv_device_tbl[] = { - { - .host_type = GENERIC, - .enable_hotplug = NULL, - .disable_hotplug= NULL, - .check_hotplug = NULL, - }, - { - .host_type = NFORCE2, - .enable_hotplug = nv_enable_hotplug, - .disable_hotplug= nv_disable_hotplug, - .check_hotplug = nv_check_hotplug, - }, - { - .host_type = NFORCE3, - .enable_hotplug = nv_enable_hotplug, - .disable_hotplug= nv_disable_hotplug, - .check_hotplug = nv_check_hotplug, - }, - { .host_type = CK804, - .enable_hotplug = nv_enable_hotplug_ck804, - .disable_hotplug= nv_disable_hotplug_ck804, - .check_hotplug = nv_check_hotplug_ck804, - }, -}; - -struct nv_host -{ - struct nv_host_desc *host_desc; - unsigned long host_flags; -}; - static struct pci_driver nv_pci_driver = { .name = DRV_NAME, .id_table = nv_pci_tbl, @@ -210,51 +169,119 @@ static struct scsi_host_template nv_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; -static const struct ata_port_operations nv_ops = { +static const struct ata_port_operations nv_generic_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, - .irq_handler = nv_interrupt, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_generic_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = nv_scr_read, .scr_write = nv_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = nv_host_stop, + .host_stop = ata_pci_host_stop, }; -/* FIXME: The hardware provides the necessary SATA PHY controls - * to support ATA_FLAG_SATA_RESET. However, it is currently - * necessary to disable that flag, to solve misdetection problems. - * See http://bugme.osdl.org/show_bug.cgi?id=3352 for more info. - * - * This problem really needs to be investigated further. But in the - * meantime, we avoid ATA_FLAG_SATA_RESET to get people working. - */ -static struct ata_port_info nv_port_info = { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | - /* ATA_FLAG_SATA_RESET | */ - ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_ops, +static const struct ata_port_operations nv_nf2_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .freeze = nv_nf2_freeze, + .thaw = nv_nf2_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_nf2_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_pci_host_stop, +}; + +static const struct ata_port_operations nv_ck804_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .freeze = nv_ck804_freeze, + .thaw = nv_ck804_thaw, + .error_handler = nv_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .data_xfer = ata_pio_data_xfer, + .irq_handler = nv_ck804_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = nv_scr_read, + .scr_write = nv_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = nv_ck804_host_stop, +}; + +static struct ata_port_info nv_port_info[] = { + /* generic */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_generic_ops, + }, + /* nforce2/3 */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_nf2_ops, + }, + /* ck804 */ + { + .sht = &nv_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_ck804_ops, + }, }; MODULE_AUTHOR("NVIDIA"); @@ -263,11 +290,10 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, nv_pci_tbl); MODULE_VERSION(DRV_VERSION); -static irqreturn_t nv_interrupt (int irq, void *dev_instance, - struct pt_regs *regs) +static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; - struct nv_host *host = host_set->private_data; unsigned int i; unsigned int handled = 0; unsigned long flags; @@ -279,11 +305,11 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); else // No request pending? Clear interrupt status @@ -293,14 +319,88 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, } - if (host->host_desc->check_hotplug) - handled += host->host_desc->check_hotplug(host_set); - spin_unlock_irqrestore(&host_set->lock, flags); return IRQ_RETVAL(handled); } +static int nv_host_intr(struct ata_port *ap, u8 irq_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + int handled; + + /* freeze if hotplugged */ + if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { + ata_port_freeze(ap); + return 1; + } + + /* bail out if not our interrupt */ + if (!(irq_stat & NV_INT_DEV)) + return 0; + + /* DEV interrupt w/ no active qc? */ + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + ata_check_status(ap); + return 1; + } + + /* handle interrupt */ + handled = ata_host_intr(ap, qc); + if (unlikely(!handled)) { + /* spurious, clear it */ + ata_check_status(ap); + } + + return 1; +} + +static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) +{ + int i, handled = 0; + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) + handled += nv_host_intr(ap, irq_stat); + + irq_stat >>= NV_INT_PORT_SHIFT; + } + + return IRQ_RETVAL(handled); +} + +static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + u8 irq_stat; + irqreturn_t ret; + + spin_lock(&host_set->lock); + irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); + ret = nv_do_interrupt(host_set, irq_stat); + spin_unlock(&host_set->lock); + + return ret; +} + +static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + u8 irq_stat; + irqreturn_t ret; + + spin_lock(&host_set->lock); + irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); + ret = nv_do_interrupt(host_set, irq_stat); + spin_unlock(&host_set->lock); + + return ret; +} + static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) @@ -317,23 +417,74 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); } -static void nv_host_stop (struct ata_host_set *host_set) +static void nv_nf2_freeze(struct ata_port *ap) { - struct nv_host *host = host_set->private_data; + unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; - // Disable hotplug event interrupts. - if (host->host_desc->disable_hotplug) - host->host_desc->disable_hotplug(host_set); + mask = inb(scr_addr + NV_INT_ENABLE); + mask &= ~(NV_INT_ALL << shift); + outb(mask, scr_addr + NV_INT_ENABLE); +} - kfree(host); +static void nv_nf2_thaw(struct ata_port *ap) +{ + unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; - ata_pci_host_stop(host_set); + outb(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS); + + mask = inb(scr_addr + NV_INT_ENABLE); + mask |= (NV_INT_MASK << shift); + outb(mask, scr_addr + NV_INT_ENABLE); +} + +static void nv_ck804_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask &= ~(NV_INT_ALL << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static void nv_ck804_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + int shift = ap->port_no * NV_INT_PORT_SHIFT; + u8 mask; + + writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804); + + mask = readb(mmio_base + NV_INT_ENABLE_CK804); + mask |= (NV_INT_MASK << shift); + writeb(mask, mmio_base + NV_INT_ENABLE_CK804); +} + +static int nv_hardreset(struct ata_port *ap, unsigned int *class) +{ + unsigned int dummy; + + /* SATA hardreset fails to retrieve proper device signature on + * some controllers. Don't classify on hardreset. For more + * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 + */ + return sata_std_hardreset(ap, &dummy); +} + +static void nv_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, + nv_hardreset, ata_std_postreset); } static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; - struct nv_host *host; struct ata_port_info *ppi; struct ata_probe_ent *probe_ent; int pci_dev_busy = 0; @@ -370,24 +521,15 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; - ppi = &nv_port_info; + ppi = &nv_port_info[ent->driver_data]; probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) goto err_out_regions; - host = kmalloc(sizeof(struct nv_host), GFP_KERNEL); - if (!host) - goto err_out_free_ent; - - memset(host, 0, sizeof(struct nv_host)); - host->host_desc = &nv_device_tbl[ent->driver_data]; - - probe_ent->private_data = host; - probe_ent->mmio_base = pci_iomap(pdev, 5, 0); if (!probe_ent->mmio_base) { rc = -EIO; - goto err_out_free_host; + goto err_out_free_ent; } base = (unsigned long)probe_ent->mmio_base; @@ -395,24 +537,27 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET; probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET; + /* enable SATA space for CK804 */ + if (ent->driver_data == CK804) { + u8 regval; + + pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); + regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; + pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); + } + pci_set_master(pdev); rc = ata_device_add(probe_ent); if (rc != NV_PORTS) goto err_out_iounmap; - // Enable hotplug event interrupts. - if (host->host_desc->enable_hotplug) - host->host_desc->enable_hotplug(probe_ent); - kfree(probe_ent); return 0; err_out_iounmap: pci_iounmap(pdev, probe_ent->mmio_base); -err_out_free_host: - kfree(host); err_out_free_ent: kfree(probe_ent); err_out_regions: @@ -424,127 +569,17 @@ err_out: return rc; } -static void nv_enable_hotplug(struct ata_probe_ent *probe_ent) -{ - u8 intr_mask; - - outb(NV_INT_STATUS_HOTPLUG, - probe_ent->port[0].scr_addr + NV_INT_STATUS); - - intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE); - intr_mask |= NV_INT_ENABLE_HOTPLUG; - - outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE); -} - -static void nv_disable_hotplug(struct ata_host_set *host_set) -{ - u8 intr_mask; - - intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE); - - intr_mask &= ~(NV_INT_ENABLE_HOTPLUG); - - outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE); -} - -static int nv_check_hotplug(struct ata_host_set *host_set) -{ - u8 intr_status; - - intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - - // Clear interrupt status. - outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - - if (intr_status & NV_INT_STATUS_HOTPLUG) { - if (intr_status & NV_INT_STATUS_PDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Primary device added\n"); - - if (intr_status & NV_INT_STATUS_PDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Primary device removed\n"); - - if (intr_status & NV_INT_STATUS_SDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Secondary device added\n"); - - if (intr_status & NV_INT_STATUS_SDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Secondary device removed\n"); - - return 1; - } - - return 0; -} - -static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent) -{ - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - u8 intr_mask; - u8 regval; - - pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); - regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; - pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - - writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804); - - intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804); - intr_mask |= NV_INT_ENABLE_HOTPLUG; - - writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804); -} - -static void nv_disable_hotplug_ck804(struct ata_host_set *host_set) +static void nv_ck804_host_stop(struct ata_host_set *host_set) { struct pci_dev *pdev = to_pci_dev(host_set->dev); - u8 intr_mask; u8 regval; - intr_mask = readb(host_set->mmio_base + NV_INT_ENABLE_CK804); - - intr_mask &= ~(NV_INT_ENABLE_HOTPLUG); - - writeb(intr_mask, host_set->mmio_base + NV_INT_ENABLE_CK804); - + /* disable SATA space for CK804 */ pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); -} -static int nv_check_hotplug_ck804(struct ata_host_set *host_set) -{ - u8 intr_status; - - intr_status = readb(host_set->mmio_base + NV_INT_STATUS_CK804); - - // Clear interrupt status. - writeb(0xff, host_set->mmio_base + NV_INT_STATUS_CK804); - - if (intr_status & NV_INT_STATUS_HOTPLUG) { - if (intr_status & NV_INT_STATUS_PDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Primary device added\n"); - - if (intr_status & NV_INT_STATUS_PDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Primary device removed\n"); - - if (intr_status & NV_INT_STATUS_SDEV_ADDED) - printk(KERN_WARNING "nv_sata: " - "Secondary device added\n"); - - if (intr_status & NV_INT_STATUS_SDEV_REMOVED) - printk(KERN_WARNING "nv_sata: " - "Secondary device removed\n"); - - return 1; - } - - return 0; + ata_pci_host_stop(host_set); } static int __init nv_init(void) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 7eb67a6bdc64..b2b6ed5216e0 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -76,7 +76,8 @@ enum { PDC_RESET = (1 << 11), /* HDMA reset */ PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI, + ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | + ATA_FLAG_PIO_POLLING, }; @@ -120,6 +121,7 @@ static struct scsi_host_template pdc_ata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -136,6 +138,7 @@ static const struct ata_port_operations pdc_sata_ops = { .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, .eng_timeout = pdc_eng_timeout, + .data_xfer = ata_mmio_data_xfer, .irq_handler = pdc_interrupt, .irq_clear = pdc_irq_clear, @@ -158,6 +161,7 @@ static const struct ata_port_operations pdc_pata_ops = { .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = pdc_eng_timeout, .irq_handler = pdc_interrupt, .irq_clear = pdc_irq_clear, @@ -363,12 +367,23 @@ static void pdc_sata_phy_reset(struct ata_port *ap) sata_phy_reset(ap); } +static void pdc_pata_cbl_detect(struct ata_port *ap) +{ + u8 tmp; + void __iomem *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; + + tmp = readb(mmio); + + if (tmp & 0x01) { + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; + } else + ap->cbl = ATA_CBL_PATA80; +} + static void pdc_pata_phy_reset(struct ata_port *ap) { - /* FIXME: add cable detect. Don't assume 40-pin cable */ - ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; - + pdc_pata_cbl_detect(ap); pdc_reset_port(ap); ata_port_probe(ap); ata_bus_reset(ap); @@ -435,7 +450,7 @@ static void pdc_eng_timeout(struct ata_port *ap) switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: - printk(KERN_ERR "ata%u: command timeout\n", ap->id); + ata_port_printk(ap, KERN_ERR, "command timeout\n"); drv_stat = ata_wait_idle(ap); qc->err_mask |= __ac_err_mask(drv_stat); break; @@ -443,8 +458,9 @@ static void pdc_eng_timeout(struct ata_port *ap) default: drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n", - ap->id, qc->tf.command, drv_stat); + ata_port_printk(ap, KERN_ERR, + "unknown timeout, cmd 0x%x stat 0x%x\n", + qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); break; @@ -533,11 +549,11 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r ap = host_set->ports[i]; tmp = mask & (1 << (i + 1)); if (tmp && ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += pdc_host_intr(ap, qc); } } @@ -676,10 +692,6 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ rc = pci_enable_device(pdev); if (rc) return rc; diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 886f3447dd48..98ddc25655f0 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.05" +#define DRV_VERSION "0.06" enum { QS_PORTS = 4, @@ -142,6 +142,7 @@ static struct scsi_host_template qs_ata_sht = { .proc_name = DRV_NAME, .dma_boundary = QS_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -156,6 +157,7 @@ static const struct ata_port_operations qs_ata_ops = { .phy_reset = qs_phy_reset, .qc_prep = qs_qc_prep, .qc_issue = qs_qc_issue, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = qs_eng_timeout, .irq_handler = qs_intr, .irq_clear = qs_irq_clear, @@ -175,7 +177,7 @@ static const struct ata_port_info qs_port_info[] = { .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | //FIXME ATA_FLAG_SRST | - ATA_FLAG_MMIO, + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, .pio_mask = 0x10, /* pio4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &qs_ata_ops, @@ -394,14 +396,13 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", sff1, sff0, port_no, sHST, sDST); handled = 1; - if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_pkt) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { switch (sHST) { case 0: /* successful CPB */ case 3: /* device error */ @@ -428,13 +429,13 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) struct ata_port *ap; ap = host_set->ports[port_no]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_mmio) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { /* check main status, clearing INTRQ */ u8 status = ata_check_status(ap); diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 106627299d55..bc9f918a7f28 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "sata_sil" -#define DRV_VERSION "0.9" +#define DRV_VERSION "1.0" enum { /* @@ -54,8 +54,9 @@ enum { */ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), + SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO, + ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, /* * Controller IDs @@ -84,6 +85,20 @@ enum { /* BMDMA/BMDMA2 */ SIL_INTR_STEERING = (1 << 1), + SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ + SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ + SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ + SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ + SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ + SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ + SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ + SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ + SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ + SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ + + /* SIEN */ + SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ + /* * Others */ @@ -96,6 +111,10 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sil_post_set_mode (struct ata_port *ap); +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static void sil_freeze(struct ata_port *ap); +static void sil_thaw(struct ata_port *ap); static const struct pci_device_id sil_pci_tbl[] = { @@ -155,6 +174,7 @@ static struct scsi_host_template sil_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -166,7 +186,6 @@ static const struct ata_port_operations sil_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = ata_std_probe_reset, .post_set_mode = sil_post_set_mode, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -174,8 +193,12 @@ static const struct ata_port_operations sil_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, - .irq_handler = ata_interrupt, + .data_xfer = ata_mmio_data_xfer, + .freeze = sil_freeze, + .thaw = sil_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .irq_handler = sil_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = sil_scr_read, .scr_write = sil_scr_write, @@ -220,6 +243,7 @@ static const struct { unsigned long tf; /* ATA taskfile register block */ unsigned long ctl; /* ATA control/altstatus register block */ unsigned long bmdma; /* DMA register block */ + unsigned long bmdma2; /* DMA register block #2 */ unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ unsigned long scr; /* SATA control register block */ unsigned long sien; /* SATA Interrupt Enable register */ @@ -227,10 +251,10 @@ static const struct { unsigned long sfis_cfg; /* SATA FIS reception config register */ } sil_port[] = { /* port 0 ... */ - { 0x80, 0x8A, 0x00, 0x40, 0x100, 0x148, 0xb4, 0x14c }, - { 0xC0, 0xCA, 0x08, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, - { 0x280, 0x28A, 0x200, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, - { 0x2C0, 0x2CA, 0x208, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, + { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, /* ... port 3 */ }; @@ -263,7 +287,7 @@ static void sil_post_set_mode (struct ata_port *ap) for (i = 0; i < 2; i++) { dev = &ap->device[i]; - if (!ata_dev_present(dev)) + if (!ata_dev_enabled(dev)) dev_mode[i] = 0; /* PIO0/1/2 */ else if (dev->flags & ATA_DFLAG_PIO) dev_mode[i] = 1; /* PIO3/4 */ @@ -314,6 +338,151 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) writel(val, mmio); } +static void sil_host_intr(struct ata_port *ap, u32 bmdma2) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + u8 status; + + if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { + u32 serror; + + /* SIEN doesn't mask SATA IRQs on some 3112s. Those + * controllers continue to assert IRQ as long as + * SError bits are pending. Clear SError immediately. + */ + serror = sil_scr_read(ap, SCR_ERROR); + sil_scr_write(ap, SCR_ERROR, serror); + + /* Trigger hotplug and accumulate SError only if the + * port isn't already frozen. Otherwise, PHY events + * during hardreset makes controllers with broken SIEN + * repeat probing needlessly. + */ + if (!(ap->flags & ATA_FLAG_FROZEN)) { + ata_ehi_hotplugged(&ap->eh_info); + ap->eh_info.serror |= serror; + } + + goto freeze; + } + + if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) + goto freeze; + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto err_hsm; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (bmdma2 & SIL_DMA_ERROR) { + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto err_hsm; + } + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto err_hsm; + + /* ack bmdma irq events */ + ata_bmdma_irq_clear(ap); + + /* kick HSM in the ass */ + ata_hsm_move(ap, qc, status, 0); + + return; + + err_hsm: + qc->err_mask |= AC_ERR_HSM; + freeze: + ata_port_freeze(ap); +} + +static irqreturn_t sil_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + void __iomem *mmio_base = host_set->mmio_base; + int handled = 0; + int i; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; + u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); + + if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) + continue; + + if (bmdma2 == 0xffffffff || + !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) + continue; + + sil_host_intr(ap, bmdma2); + handled = 1; + } + + spin_unlock(&host_set->lock); + + return IRQ_RETVAL(handled); +} + +static void sil_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ + writel(0, mmio_base + sil_port[ap->port_no].sien); + + /* plug IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp |= SIL_MASK_IDE0_INT << ap->port_no; + writel(tmp, mmio_base + SIL_SYSCFG); + readl(mmio_base + SIL_SYSCFG); /* flush */ +} + +static void sil_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host_set->mmio_base; + u32 tmp; + + /* clear IRQ */ + ata_chk_status(ap); + ata_bmdma_irq_clear(ap); + + /* turn on SATA IRQ */ + writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); + + /* turn on IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); + writel(tmp, mmio_base + SIL_SYSCFG); +} + /** * sil_dev_config - Apply device/host-specific errata fixups * @ap: Port containing device to be examined @@ -360,16 +529,16 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) if (slow_down || ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE))) { - printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix " + "(mod15write workaround)\n"); dev->max_sectors = 15; return; } /* limit to udma5 */ if (quirks & SIL_QUIRK_UDMA5MAX) { - printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n", - ap->id, dev->devno, model_num); + ata_dev_printk(dev, KERN_INFO, + "applying Maxtor errata fix %s\n", model_num); dev->udma_mask &= ATA_UDMA5; return; } @@ -384,16 +553,12 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) int rc; unsigned int i; int pci_dev_busy = 0; - u32 tmp, irq_mask; + u32 tmp; u8 cls; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ rc = pci_enable_device(pdev); if (rc) return rc; @@ -478,31 +643,13 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } if (ent->driver_data == sil_3114) { - irq_mask = SIL_MASK_4PORT; - /* flip the magic "make 4 ports work" bit */ tmp = readl(mmio_base + sil_port[2].bmdma); if ((tmp & SIL_INTR_STEERING) == 0) writel(tmp | SIL_INTR_STEERING, mmio_base + sil_port[2].bmdma); - - } else { - irq_mask = SIL_MASK_2PORT; } - /* make sure IDE0/1/2/3 interrupts are not masked */ - tmp = readl(mmio_base + SIL_SYSCFG); - if (tmp & irq_mask) { - tmp &= ~irq_mask; - writel(tmp, mmio_base + SIL_SYSCFG); - readl(mmio_base + SIL_SYSCFG); /* flush */ - } - - /* mask all SATA phy-related interrupts */ - /* TODO: unmask bit 6 (SError N bit) for hotplug */ - for (i = 0; i < probe_ent->n_ports; i++) - writel(0, mmio_base + sil_port[i].sien); - pci_set_master(pdev); /* FIXME: check ata_device_add return value */ diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index cb9082fd7e2f..c8b477c67247 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -31,15 +31,15 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.23" +#define DRV_VERSION "0.24" /* * Port request block (PRB) 32 bytes */ struct sil24_prb { - u16 ctrl; - u16 prot; - u32 rx_cnt; + __le16 ctrl; + __le16 prot; + __le32 rx_cnt; u8 fis[6 * 4]; }; @@ -47,17 +47,17 @@ struct sil24_prb { * Scatter gather entry (SGE) 16 bytes */ struct sil24_sge { - u64 addr; - u32 cnt; - u32 flags; + __le64 addr; + __le32 cnt; + __le32 flags; }; /* * Port multiplier */ struct sil24_port_multiplier { - u32 diag; - u32 sactive; + __le32 diag; + __le32 sactive; }; enum { @@ -86,12 +86,21 @@ enum { /* HOST_SLOT_STAT bits */ HOST_SSTAT_ATTN = (1 << 31), + /* HOST_CTRL bits */ + HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ + HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ + HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ + HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ + HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + /* * Port registers * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) */ PORT_REGS_SIZE = 0x2000, - PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ + + PORT_LRAM = 0x0000, /* 31 LRAM slots and PM regs */ + PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ @@ -142,8 +151,16 @@ enum { PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ - PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */ - PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ + PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ + PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ + PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ + PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ + PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ + + DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | + PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | + PORT_IRQ_UNK_FIS, /* bits[27:16] are unmasked (raw) */ PORT_IRQ_RAW_SHIFT = 16, @@ -174,7 +191,7 @@ enum { PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ - PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ @@ -202,11 +219,19 @@ enum { SGE_DRD = (1 << 29), /* discard data read (/dev/null) data address ignored */ + SIL24_MAX_CMDS = 31, + /* board id */ BID_SIL3124 = 0, BID_SIL3132 = 1, BID_SIL3131 = 2, + /* host flags */ + SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY, + SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ + IRQ_STAT_4PORTS = 0xf, }; @@ -226,6 +251,58 @@ union sil24_cmd_block { struct sil24_atapi_block atapi; }; +static struct sil24_cerr_info { + unsigned int err_mask, action; + const char *desc; +} sil24_cerr_db[] = { + [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error" }, + [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error via D2H FIS" }, + [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + "device error via SDB FIS" }, + [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, + "error in data FIS" }, + [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, + "failed to transmit command FIS" }, + [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "protocol mismatch" }, + [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "data directon mismatch" }, + [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "ran out of SGEs while writing" }, + [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "ran out of SGEs while reading" }, + [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "invalid data directon for ATAPI CDB" }, + [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, + "SGT no on qword boundary" }, + [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while fetching SGT" }, + [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while fetching SGT" }, + [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while fetching SGT" }, + [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, + "PRB not on qword boundary" }, + [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while fetching PRB" }, + [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while fetching PRB" }, + [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while fetching PRB" }, + [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "undefined error while transferring data" }, + [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI target abort while transferring data" }, + [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI master abort while transferring data" }, + [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, + "PCI parity error while transferring data" }, + [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET, + "FIS received while sending service FIS" }, +}; + /* * ap->private_data * @@ -249,12 +326,14 @@ static u8 sil24_check_status(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes); static void sil24_qc_prep(struct ata_queued_cmd *qc); static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_irq_clear(struct ata_port *ap); -static void sil24_eng_timeout(struct ata_port *ap); static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void sil24_freeze(struct ata_port *ap); +static void sil24_thaw(struct ata_port *ap); +static void sil24_error_handler(struct ata_port *ap); +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); static int sil24_port_start(struct ata_port *ap); static void sil24_port_stop(struct ata_port *ap); static void sil24_host_stop(struct ata_host_set *host_set); @@ -281,7 +360,8 @@ static struct scsi_host_template sil24_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, + .change_queue_depth = ata_scsi_change_queue_depth, + .can_queue = SIL24_MAX_CMDS, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, @@ -290,6 +370,7 @@ static struct scsi_host_template sil24_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -304,19 +385,20 @@ static const struct ata_port_operations sil24_ops = { .tf_read = sil24_tf_read, - .probe_reset = sil24_probe_reset, - .qc_prep = sil24_qc_prep, .qc_issue = sil24_qc_issue, - .eng_timeout = sil24_eng_timeout, - .irq_handler = sil24_interrupt, .irq_clear = sil24_irq_clear, .scr_read = sil24_scr_read, .scr_write = sil24_scr_write, + .freeze = sil24_freeze, + .thaw = sil24_thaw, + .error_handler = sil24_error_handler, + .post_internal_cmd = sil24_post_internal_cmd, + .port_start = sil24_port_start, .port_stop = sil24_port_stop, .host_stop = sil24_host_stop, @@ -333,9 +415,8 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - SIL24_NPORTS2FLAG(4), + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | + SIL24_FLAG_PCIX_IRQ_WOC, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -344,9 +425,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3132 */ { .sht = &sil24_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - SIL24_NPORTS2FLAG(2), + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -355,9 +434,7 @@ static struct ata_port_info sil24_port_info[] = { /* sil_3131/sil_3531 */ { .sht = &sil24_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - SIL24_NPORTS2FLAG(1), + .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -365,6 +442,13 @@ static struct ata_port_info sil24_port_info[] = { }, }; +static int sil24_tag(int tag) +{ + if (unlikely(ata_tag_internal(tag))) + return 0; + return tag; +} + static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; @@ -426,56 +510,65 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) *tf = pp->tf; } -static int sil24_softreset(struct ata_port *ap, int verbose, - unsigned int *class) +static int sil24_init_port(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + u32 tmp; + + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); + ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_INIT, PORT_CS_INIT, 10, 100); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_RDY, 0, 10, 100); + + if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) + return -EIO; + return 0; +} + +static int sil24_softreset(struct ata_port *ap, unsigned int *class) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; dma_addr_t paddr = pp->cmd_block_dma; - unsigned long timeout = jiffies + ATA_TMOUT_BOOT * HZ; - u32 irq_enable, irq_stat; + u32 mask, irq_stat; + const char *reason; DPRINTK("ENTER\n"); - if (!sata_dev_present(ap)) { + if (ata_port_offline(ap)) { DPRINTK("PHY reports no device\n"); *class = ATA_DEV_NONE; goto out; } - /* temporarily turn off IRQs during SRST */ - irq_enable = readl(port + PORT_IRQ_ENABLE_SET); - writel(irq_enable, port + PORT_IRQ_ENABLE_CLR); - - /* - * XXX: Not sure whether the following sleep is needed or not. - * The original driver had it. So.... - */ - msleep(10); + /* put the port into known state */ + if (sil24_init_port(ap)) { + reason ="port not ready"; + goto err; + } + /* do SRST */ prb->ctrl = cpu_to_le16(PRB_CTRL_SRST); prb->fis[1] = 0; /* no PM yet */ writel((u32)paddr, port + PORT_CMD_ACTIVATE); + writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); - do { - irq_stat = readl(port + PORT_IRQ_STAT); - writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ + mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; + irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0, + 100, ATA_TMOUT_BOOT / HZ * 1000); - irq_stat >>= PORT_IRQ_RAW_SHIFT; - if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR)) - break; - - msleep(100); - } while (time_before(jiffies, timeout)); - - /* restore IRQs */ - writel(irq_enable, port + PORT_IRQ_ENABLE_SET); + writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */ + irq_stat >>= PORT_IRQ_RAW_SHIFT; if (!(irq_stat & PORT_IRQ_COMPLETE)) { - DPRINTK("EXIT, srst failed\n"); - return -EIO; + if (irq_stat & PORT_IRQ_ERROR) + reason = "SRST command error"; + else + reason = "timeout"; + goto err; } sil24_update_tf(ap); @@ -487,22 +580,57 @@ static int sil24_softreset(struct ata_port *ap, int verbose, out: DPRINTK("EXIT, class=%u\n", *class); return 0; + + err: + ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); + return -EIO; } -static int sil24_hardreset(struct ata_port *ap, int verbose, - unsigned int *class) +static int sil24_hardreset(struct ata_port *ap, unsigned int *class) { - unsigned int dummy_class; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + const char *reason; + int tout_msec, rc; + u32 tmp; - /* sil24 doesn't report device signature after hard reset */ - return sata_std_hardreset(ap, verbose, &dummy_class); -} + /* sil24 does the right thing(tm) without any protection */ + sata_set_spd(ap); -static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - return ata_drive_probe_reset(ap, ata_std_probeinit, - sil24_softreset, sil24_hardreset, - ata_std_postreset, classes); + tout_msec = 100; + if (ata_port_online(ap)) + tout_msec = 5000; + + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); + + /* SStatus oscillates between zero and valid status after + * DEV_RST, debounce it. + */ + rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst); + if (rc) { + reason = "PHY debouncing failed"; + goto err; + } + + if (tmp & PORT_CS_DEV_RST) { + if (ata_port_offline(ap)) + return 0; + reason = "link not ready"; + goto err; + } + + /* Sil24 doesn't store signature FIS after hardreset, so we + * can't wait for BSY to clear. Some devices take a long time + * to get ready and those devices will choke if we don't wait + * for BSY clearance here. Tell libata to perform follow-up + * softreset. + */ + return -EAGAIN; + + err: + ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason); + return -EIO; } static inline void sil24_fill_sg(struct ata_queued_cmd *qc, @@ -528,17 +656,20 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct sil24_port_priv *pp = ap->private_data; - union sil24_cmd_block *cb = pp->cmd_block + qc->tag; + union sil24_cmd_block *cb; struct sil24_prb *prb; struct sil24_sge *sge; + u16 ctrl = 0; + + cb = &pp->cmd_block[sil24_tag(qc->tag)]; switch (qc->tf.protocol) { case ATA_PROT_PIO: case ATA_PROT_DMA: + case ATA_PROT_NCQ: case ATA_PROT_NODATA: prb = &cb->ata.prb; sge = cb->ata.sge; - prb->ctrl = 0; break; case ATA_PROT_ATAPI: @@ -551,12 +682,10 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { if (qc->tf.flags & ATA_TFLAG_WRITE) - prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_WRITE); + ctrl = PRB_CTRL_PACKET_WRITE; else - prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_READ); - } else - prb->ctrl = 0; - + ctrl = PRB_CTRL_PACKET_READ; + } break; default: @@ -565,6 +694,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) BUG(); } + prb->ctrl = cpu_to_le16(ctrl); ata_tf_to_fis(&qc->tf, prb->fis, 0); if (qc->flags & ATA_QCFLAG_DMAMAP) @@ -574,11 +704,18 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; - dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + unsigned int tag = sil24_tag(qc->tag); + dma_addr_t paddr; + void __iomem *activate; + + paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); + activate = port + PORT_CMD_ACTIVATE + tag * 8; + + writel((u32)paddr, activate); + writel((u64)paddr >> 32, activate + 4); - writel((u32)paddr, port + PORT_CMD_ACTIVATE); return 0; } @@ -587,162 +724,139 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static int __sil24_restart_controller(void __iomem *port) +static void sil24_freeze(struct ata_port *ap) { - u32 tmp; - int cnt; - - writel(PORT_CS_INIT, port + PORT_CTRL_STAT); - - /* Max ~10ms */ - for (cnt = 0; cnt < 10000; cnt++) { - tmp = readl(port + PORT_CTRL_STAT); - if (tmp & PORT_CS_RDY) - return 0; - udelay(1); - } - - return -1; -} - -static void sil24_restart_controller(struct ata_port *ap) -{ - if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr)) - printk(KERN_ERR DRV_NAME - " ata%u: failed to restart controller\n", ap->id); -} - -static int __sil24_reset_controller(void __iomem *port) -{ - int cnt; - u32 tmp; - - /* Reset controller state. Is this correct? */ - writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); - readl(port + PORT_CTRL_STAT); /* sync */ - - /* Max ~100ms */ - for (cnt = 0; cnt < 1000; cnt++) { - udelay(100); - tmp = readl(port + PORT_CTRL_STAT); - if (!(tmp & PORT_CS_DEV_RST)) - break; - } - - if (tmp & PORT_CS_DEV_RST) - return -1; - - if (tmp & PORT_CS_RDY) - return 0; - - return __sil24_restart_controller(port); -} - -static void sil24_reset_controller(struct ata_port *ap) -{ - printk(KERN_NOTICE DRV_NAME - " ata%u: resetting controller...\n", ap->id); - if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr)) - printk(KERN_ERR DRV_NAME - " ata%u: failed to reset controller\n", ap->id); -} - -static void sil24_eng_timeout(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - - printk(KERN_ERR "ata%u: command timeout\n", ap->id); - qc->err_mask |= AC_ERR_TIMEOUT; - ata_eh_qc_complete(qc); - - sil24_reset_controller(ap); -} - -static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) -{ - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 irq_stat, cmd_err, sstatus, serror; - unsigned int err_mask; - irq_stat = readl(port + PORT_IRQ_STAT); - writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ - - if (!(irq_stat & PORT_IRQ_ERROR)) { - /* ignore non-completion, non-error irqs for now */ - printk(KERN_WARNING DRV_NAME - "ata%u: non-error exception irq (irq_stat %x)\n", - ap->id, irq_stat); - return; - } - - cmd_err = readl(port + PORT_CMD_ERR); - sstatus = readl(port + PORT_SSTATUS); - serror = readl(port + PORT_SERROR); - if (serror) - writel(serror, port + PORT_SERROR); - - /* - * Don't log ATAPI device errors. They're supposed to happen - * and any serious errors will be logged using sense data by - * the SCSI layer. + /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear + * PORT_IRQ_ENABLE instead. */ - if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB) - printk("ata%u: error interrupt on port%d\n" - " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", - ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); +} - if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) { - /* - * Device is reporting error, tf registers are valid. - */ - sil24_update_tf(ap); - err_mask = ac_err_mask(pp->tf.command); - sil24_restart_controller(ap); - } else { - /* - * Other errors. libata currently doesn't have any - * mechanism to report these errors. Just turn on - * ATA_ERR. - */ - err_mask = AC_ERR_OTHER; - sil24_reset_controller(ap); +static void sil24_thaw(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + u32 tmp; + + /* clear IRQ */ + tmp = readl(port + PORT_IRQ_STAT); + writel(tmp, port + PORT_IRQ_STAT); + + /* turn IRQ back on */ + writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET); +} + +static void sil24_error_intr(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct ata_eh_info *ehi = &ap->eh_info; + int freeze = 0; + u32 irq_stat; + + /* on error, we need to clear IRQ explicitly */ + irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); + + /* first, analyze and record host port events */ + ata_ehi_clear_desc(ehi); + + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + + if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, ", %s", + irq_stat & PORT_IRQ_PHYRDY_CHG ? + "PHY RDY changed" : "device exchanged"); + freeze = 1; } - if (qc) { - qc->err_mask |= err_mask; - ata_qc_complete(qc); + if (irq_stat & PORT_IRQ_UNK_FIS) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi , ", unknown FIS"); + freeze = 1; } + + /* deal with command error */ + if (irq_stat & PORT_IRQ_ERROR) { + struct sil24_cerr_info *ci = NULL; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 cerr; + + /* analyze CMD_ERR */ + cerr = readl(port + PORT_CMD_ERR); + if (cerr < ARRAY_SIZE(sil24_cerr_db)) + ci = &sil24_cerr_db[cerr]; + + if (ci && ci->desc) { + err_mask |= ci->err_mask; + action |= ci->action; + ata_ehi_push_desc(ehi, ", %s", ci->desc); + } else { + err_mask |= AC_ERR_OTHER; + action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(ehi, ", unknown command error %d", + cerr); + } + + /* record error info */ + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + sil24_update_tf(ap); + qc->err_mask |= err_mask; + } else + ehi->err_mask |= err_mask; + + ehi->action |= action; + } + + /* freeze or abort */ + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void sil24_finish_qc(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + sil24_update_tf(qc->ap); } static inline void sil24_host_intr(struct ata_port *ap) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 slot_stat; + u32 slot_stat, qc_active; + int rc; slot_stat = readl(port + PORT_SLOT_STAT); - if (!(slot_stat & HOST_SSTAT_ATTN)) { - struct sil24_port_priv *pp = ap->private_data; - /* - * !HOST_SSAT_ATTN guarantees successful completion, - * so reading back tf registers is unnecessary for - * most commands. TODO: read tf registers for - * commands which require these values on successful - * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER, - * DEVICE RESET and READ PORT MULTIPLIER (any more?). - */ - sil24_update_tf(ap); - if (qc) { - qc->err_mask |= ac_err_mask(pp->tf.command); - ata_qc_complete(qc); - } - } else - sil24_error_intr(ap, slot_stat); + if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { + sil24_error_intr(ap); + return; + } + + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + + qc_active = slot_stat & ~HOST_SSTAT_ATTN; + rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); + if (rc > 0) + return; + if (rc < 0) { + struct ata_eh_info *ehi = &ap->eh_info; + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_SOFTRESET; + ata_port_freeze(ap); + return; + } + + if (ata_ratelimit()) + ata_port_printk(ap, KERN_INFO, "spurious interrupt " + "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", + slot_stat, ap->active_tag, ap->sactive); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) @@ -769,7 +883,7 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) if (status & (1 << i)) { struct ata_port *ap = host_set->ports[i]; - if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { sil24_host_intr(host_set->ports[i]); handled++; } else @@ -782,9 +896,35 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * return IRQ_RETVAL(handled); } +static void sil24_error_handler(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + + if (sil24_init_port(ap)) { + ata_eh_freeze_port(ap); + ehc->i.action |= ATA_EH_HARDRESET; + } + + /* perform recovery */ + ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, + ata_std_postreset); +} + +static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + /* make DMA engine forget about the failed command */ + if (qc->err_mask) + sil24_init_port(ap); +} + static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev) { - const size_t cb_size = sizeof(*pp->cmd_block); + const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS; dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); } @@ -794,7 +934,7 @@ static int sil24_port_start(struct ata_port *ap) struct device *dev = ap->host_set->dev; struct sil24_port_priv *pp; union sil24_cmd_block *cb; - size_t cb_size = sizeof(*cb); + size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; dma_addr_t cb_dma; int rc = -ENOMEM; @@ -858,6 +998,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *host_base = NULL; void __iomem *port_base = NULL; int i, rc; + u32 tmp; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -910,37 +1051,53 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* * Configure the device */ - /* - * FIXME: This device is certainly 64-bit capable. We just - * don't know how to use it. After fixing 32bit activation in - * this function, enable 64bit masks here. - */ - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - goto out_free; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - goto out_free; + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + goto out_free; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + goto out_free; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + goto out_free; + } } /* GPIO off */ writel(0, host_base + HOST_FLASH_CMD); - /* Mask interrupts during initialization */ + /* Apply workaround for completion IRQ loss on PCI-X errata */ + if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { + tmp = readl(host_base + HOST_CTRL); + if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) + dev_printk(KERN_INFO, &pdev->dev, + "Applying completion IRQ loss on PCI-X " + "errata fix\n"); + else + probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; + } + + /* clear global reset & mask interrupts during initialization */ writel(0, host_base + HOST_CTRL); for (i = 0; i < probe_ent->n_ports; i++) { void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; - u32 tmp; - int cnt; - probe_ent->port[i].cmd_addr = portu + PORT_PRB; + probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); @@ -952,18 +1109,20 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tmp = readl(port + PORT_CTRL_STAT); if (tmp & PORT_CS_PORT_RST) { writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - readl(port + PORT_CTRL_STAT); /* sync */ - for (cnt = 0; cnt < 10; cnt++) { - msleep(10); - tmp = readl(port + PORT_CTRL_STAT); - if (!(tmp & PORT_CS_PORT_RST)) - break; - } + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, + PORT_CS_PORT_RST, 10, 100); if (tmp & PORT_CS_PORT_RST) dev_printk(KERN_ERR, &pdev->dev, "failed to clear port RST\n"); } + /* Configure IRQ WoC */ + if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + /* Zero error counters. */ writel(0x8000, port + PORT_DECODE_ERR_THRESH); writel(0x8000, port + PORT_CRC_ERR_THRESH); @@ -972,26 +1131,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) writel(0x0000, port + PORT_CRC_ERR_CNT); writel(0x0000, port + PORT_HSHK_ERR_CNT); - /* FIXME: 32bit activation? */ - writel(0, port + PORT_ACTIVATE_UPPER_ADDR); - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT); - - /* Configure interrupts */ - writel(0xffff, port + PORT_IRQ_ENABLE_CLR); - writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS, - port + PORT_IRQ_ENABLE_SET); - - /* Clear interrupts */ - writel(0x0fff0fff, port + PORT_IRQ_STAT); - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + /* Always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); /* Clear port multiplier enable and resume bits */ writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); - - /* Reset itself */ - if (__sil24_reset_controller(port)) - dev_printk(KERN_ERR, &pdev->dev, - "failed to reset controller\n"); } /* Turn on interrupts */ diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 728530df2e07..809d337ed641 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -43,7 +43,7 @@ #include #define DRV_NAME "sata_sis" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.6" enum { sis_180 = 0, @@ -96,6 +96,7 @@ static struct scsi_host_template sis_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -106,14 +107,17 @@ static const struct ata_port_operations sis_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = sis_scr_read, @@ -125,8 +129,7 @@ static const struct ata_port_operations sis_ops = { static struct ata_port_info sis_port_info = { .sht = &sis_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x7, .udma_mask = 0x7f, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 53b0d5c0a61f..c94b870cf378 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -54,7 +54,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "1.07" +#define DRV_VERSION "1.8" enum { /* Taskfile registers offsets */ @@ -257,7 +257,7 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, int len, index; /* Find the ata_port */ - ap = (struct ata_port *) &shost->hostdata[0]; + ap = ata_shost_to_port(shost); if (ap == NULL) return 0; @@ -299,6 +299,7 @@ static struct scsi_host_template k2_sata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, #ifdef CONFIG_PPC_OF .proc_info = k2_sata_proc_info, #endif @@ -313,14 +314,17 @@ static const struct ata_port_operations k2_sata_ops = { .check_status = k2_stat_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = k2_bmdma_setup_mmio, .bmdma_start = k2_bmdma_start_mmio, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .data_xfer = ata_mmio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = k2_sata_scr_read, @@ -420,8 +424,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); probe_ent->sht = &k2_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO; probe_ent->port_ops = &k2_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 4139ad4b1df0..7f864410f7c2 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.9" enum { @@ -191,6 +191,7 @@ static struct scsi_host_template pdc_sata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -204,6 +205,7 @@ static const struct ata_port_operations pdc_20621_ops = { .phy_reset = pdc_20621_phy_reset, .qc_prep = pdc20621_qc_prep, .qc_issue = pdc20621_qc_issue_prot, + .data_xfer = ata_mmio_data_xfer, .eng_timeout = pdc_eng_timeout, .irq_handler = pdc20621_interrupt, .irq_clear = pdc20621_irq_clear, @@ -218,7 +220,7 @@ static const struct ata_port_info pdc_port_info[] = { .sht = &pdc_sata_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_NO_ATAPI, + ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -833,11 +835,11 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re tmp = mask & (1 << i); VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); if (tmp && ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += pdc20621_host_intr(ap, qc, (i > 4), mmio_base); } @@ -868,15 +870,16 @@ static void pdc_eng_timeout(struct ata_port *ap) switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: - printk(KERN_ERR "ata%u: command timeout\n", ap->id); + ata_port_printk(ap, KERN_ERR, "command timeout\n"); qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); break; default: drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n", - ap->id, qc->tf.command, drv_stat); + ata_port_printk(ap, KERN_ERR, + "unknown timeout, cmd 0x%x stat 0x%x\n", + qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); break; @@ -1375,10 +1378,6 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ rc = pci_enable_device(pdev); if (rc) return rc; diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 38b52bd3fa3f..f668c997e9af 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -37,7 +37,7 @@ #include #define DRV_NAME "sata_uli" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.6" enum { uli_5289 = 0, @@ -90,6 +90,7 @@ static struct scsi_host_template uli_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -102,16 +103,18 @@ static const struct ata_port_operations uli_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -126,8 +129,7 @@ static const struct ata_port_operations uli_ops = { static struct ata_port_info uli_port_info = { .sht = &uli_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &uli_ops, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 9e7ae4e0db32..322890b400a6 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -47,7 +47,7 @@ #include #define DRV_NAME "sata_via" -#define DRV_VERSION "1.1" +#define DRV_VERSION "1.2" enum board_ids_enum { vt6420, @@ -103,6 +103,7 @@ static struct scsi_host_template svia_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -115,8 +116,6 @@ static const struct ata_port_operations svia_sata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -124,8 +123,12 @@ static const struct ata_port_operations svia_sata_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -140,7 +143,7 @@ static const struct ata_port_operations svia_sata_ops = { static struct ata_port_info svia_port_info = { .sht = &svia_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = 0x7f, @@ -235,8 +238,7 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) INIT_LIST_HEAD(&probe_ent->node); probe_ent->sht = &svia_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | - ATA_FLAG_NO_LEGACY; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; probe_ent->port_ops = &svia_sata_ops; probe_ent->n_ports = N_PORTS; probe_ent->irq = pdev->irq; diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 27d658704cf9..6d0c4f18e652 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -221,14 +221,21 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; - if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + if (is_vsc_sata_int_err(i, int_status)) { + u32 err_status; + printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); + err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; + vsc_sata_scr_write(ap, SCR_ERROR, err_status); + handled++; + } + + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); - } else if (is_vsc_sata_int_err(i, int_status)) { + else if (is_vsc_sata_int_err(i, int_status)) { /* * On some chips (i.e. Intel 31244), an error * interrupt will sneak in at initialization @@ -272,6 +279,7 @@ static struct scsi_host_template vsc_sata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -283,14 +291,17 @@ static const struct ata_port_operations vsc_sata_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = vsc_sata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = vsc_sata_scr_read, @@ -385,7 +396,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d probe_ent->sht = &vsc_sata_sht; probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET; + ATA_FLAG_MMIO; probe_ent->port_ops = &vsc_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 3e90ba797df2..2ab7df0dcfe8 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -578,6 +578,24 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) */ static DEFINE_PER_CPU(struct list_head, scsi_done_q); +/** + * scsi_req_abort_cmd -- Request command recovery for the specified command + * cmd: pointer to the SCSI command of interest + * + * This function requests that SCSI Core start recovery for the + * command by deleting the timer and adding the command to the eh + * queue. It can be called by either LLDDs or SCSI Core. LLDDs who + * implement their own error recovery MAY ignore the timeout event if + * they generated scsi_req_abort_cmd. + */ +void scsi_req_abort_cmd(struct scsi_cmnd *cmd) +{ + if (!scsi_delete_timer(cmd)) + return; + scsi_times_out(cmd); +} +EXPORT_SYMBOL(scsi_req_abort_cmd); + /** * scsi_done - Enqueue the finished SCSI command into the done queue. * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 1c7d993fa8ad..6a7a60fc0a4e 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -57,6 +57,28 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) } } +/** + * scsi_schedule_eh - schedule EH for SCSI host + * @shost: SCSI host to invoke error handling on. + * + * Schedule SCSI EH without scmd. + **/ +void scsi_schedule_eh(struct Scsi_Host *shost) +{ + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + + if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 || + scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) { + shost->host_eh_scheduled++; + scsi_eh_wakeup(shost); + } + + spin_unlock_irqrestore(shost->host_lock, flags); +} +EXPORT_SYMBOL_GPL(scsi_schedule_eh); + /** * scsi_eh_scmd_add - add scsi cmd to error handling. * @scmd: scmd to run eh on. @@ -1515,7 +1537,7 @@ int scsi_error_handler(void *data) */ set_current_state(TASK_INTERRUPTIBLE); while (!kthread_should_stop()) { - if (shost->host_failed == 0 || + if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) || shost->host_failed != shost->host_busy) { SCSI_LOG_ERROR_RECOVERY(1, printk("Error handler scsi_eh_%d sleeping\n", diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 3302d8068c41..3d04a9f386ac 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -500,7 +500,7 @@ void scsi_device_unbusy(struct scsi_device *sdev) spin_lock_irqsave(shost->host_lock, flags); shost->host_busy--; if (unlikely(scsi_host_in_recovery(shost) && - shost->host_failed)) + (shost->host_failed || shost->host_eh_scheduled))) scsi_eh_wakeup(shost); spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); diff --git a/drivers/scsi/scsi_transport_api.h b/drivers/scsi/scsi_transport_api.h new file mode 100644 index 000000000000..934f0e62bb5c --- /dev/null +++ b/drivers/scsi/scsi_transport_api.h @@ -0,0 +1,6 @@ +#ifndef _SCSI_TRANSPORT_API_H +#define _SCSI_TRANSPORT_API_H + +void scsi_schedule_eh(struct Scsi_Host *shost); + +#endif /* _SCSI_TRANSPORT_API_H */ diff --git a/include/linux/ata.h b/include/linux/ata.h index 312a2c0c64e6..3671af869696 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -97,6 +97,9 @@ enum { ATA_DRQ = (1 << 3), /* data request i/o */ ATA_ERR = (1 << 0), /* have an error */ ATA_SRST = (1 << 2), /* software reset */ + ATA_ICRC = (1 << 7), /* interface CRC error */ + ATA_UNC = (1 << 6), /* uncorrectable media error */ + ATA_IDNF = (1 << 4), /* ID not found */ ATA_ABORTED = (1 << 2), /* command aborted */ /* ATA command block registers */ @@ -130,6 +133,8 @@ enum { ATA_CMD_WRITE = 0xCA, ATA_CMD_WRITE_EXT = 0x35, ATA_CMD_WRITE_FUA_EXT = 0x3D, + ATA_CMD_FPDMA_READ = 0x60, + ATA_CMD_FPDMA_WRITE = 0x61, ATA_CMD_PIO_READ = 0x20, ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, @@ -148,6 +153,10 @@ enum { ATA_CMD_INIT_DEV_PARAMS = 0x91, ATA_CMD_READ_NATIVE_MAX = 0xF8, ATA_CMD_READ_NATIVE_MAX_EXT = 0x27, + ATA_CMD_READ_LOG_EXT = 0x2f, + + /* READ_LOG_EXT pages */ + ATA_LOG_SATA_NCQ = 0x10, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, @@ -172,6 +181,9 @@ enum { XFER_PIO_0 = 0x08, XFER_PIO_SLOW = 0x00, + SETFEATURES_WC_ON = 0x02, /* Enable write cache */ + SETFEATURES_WC_OFF = 0x82, /* Disable write cache */ + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: @@ -192,6 +204,16 @@ enum { SCR_ACTIVE = 3, SCR_NOTIFICATION = 4, + /* SError bits */ + SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */ + SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */ + SERR_DATA = (1 << 8), /* unrecovered data error */ + SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */ + SERR_PROTOCOL = (1 << 10), /* protocol violation */ + SERR_INTERNAL = (1 << 11), /* host internal error */ + SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */ + SERR_DEV_XCHG = (1 << 26), /* device exchanged */ + /* struct ata_taskfile flags */ ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */ ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ @@ -199,6 +221,7 @@ enum { ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ ATA_TFLAG_FUA = (1 << 5), /* enable FUA */ + ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */ }; enum ata_tf_protocols { @@ -207,6 +230,7 @@ enum ata_tf_protocols { ATA_PROT_NODATA, /* no data */ ATA_PROT_PIO, /* PIO single sector */ ATA_PROT_DMA, /* DMA */ + ATA_PROT_NCQ, /* NCQ */ ATA_PROT_ATAPI, /* packet command, PIO data xfer*/ ATA_PROT_ATAPI_NODATA, /* packet command, no data */ ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */ @@ -262,6 +286,8 @@ struct ata_taskfile { #define ata_id_has_pm(id) ((id)[82] & (1 << 3)) #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) +#define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) +#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) #define ata_id_has_dword_io(id) ((id)[50] & (1 << 0)) #define ata_id_u32(id,n) \ @@ -272,6 +298,8 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) +#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20) + static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; @@ -311,6 +339,15 @@ static inline int is_atapi_taskfile(const struct ata_taskfile *tf) (tf->protocol == ATA_PROT_ATAPI_DMA); } +static inline int is_multi_taskfile(struct ata_taskfile *tf) +{ + return (tf->command == ATA_CMD_READ_MULTI) || + (tf->command == ATA_CMD_WRITE_MULTI) || + (tf->command == ATA_CMD_READ_MULTI_EXT) || + (tf->command == ATA_CMD_WRITE_MULTI_EXT) || + (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT); +} + static inline int ata_ok(u8 status) { return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR)) diff --git a/include/linux/libata.h b/include/linux/libata.h index b80d2e7fa6d2..20b1cf527c60 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -33,6 +33,7 @@ #include #include #include +#include /* * compile-time options: to be removed as soon as all the drivers are @@ -44,7 +45,6 @@ #undef ATA_NDEBUG /* define to disable quick runtime checks */ #undef ATA_ENABLE_PATA /* define to enable PATA support in some * low-level drivers */ -#undef ATAPI_ENABLE_DMADIR /* enables ATAPI DMADIR bridge support */ /* note: prints function name for you */ @@ -108,8 +108,11 @@ enum { LIBATA_MAX_PRD = ATA_MAX_PRD / 2, ATA_MAX_PORTS = 8, ATA_DEF_QUEUE = 1, - ATA_MAX_QUEUE = 1, + /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ + ATA_MAX_QUEUE = 32, + ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, ATA_MAX_SECTORS = 200, /* FIXME */ + ATA_MAX_SECTORS_LBA48 = 65535, ATA_MAX_BUS = 2, ATA_DEF_BUSY_WAIT = 10000, ATA_SHORT_PAUSE = (HZ >> 6) + 1, @@ -120,9 +123,17 @@ enum { ATA_SHT_USE_CLUSTERING = 1, /* struct ata_device stuff */ - ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ - ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */ - ATA_DFLAG_LBA = (1 << 2), /* device supports LBA */ + ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */ + ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */ + ATA_DFLAG_CDB_INTR = (1 << 2), /* device asserts INTRQ when ready for CDB */ + ATA_DFLAG_NCQ = (1 << 3), /* device supports NCQ */ + ATA_DFLAG_CFG_MASK = (1 << 8) - 1, + + ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ + ATA_DFLAG_INIT_MASK = (1 << 16) - 1, + + ATA_DFLAG_DETACH = (1 << 16), + ATA_DFLAG_DETACHED = (1 << 17), ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -132,43 +143,57 @@ enum { ATA_DEV_NONE = 5, /* no device */ /* struct ata_port flags */ - ATA_FLAG_SLAVE_POSS = (1 << 1), /* host supports slave dev */ + ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ /* (doesn't imply presence) */ - ATA_FLAG_PORT_DISABLED = (1 << 2), /* port is disabled, ignore it */ - ATA_FLAG_SATA = (1 << 3), - ATA_FLAG_NO_LEGACY = (1 << 4), /* no legacy mode check */ - ATA_FLAG_SRST = (1 << 5), /* (obsolete) use ATA SRST, not E.D.D. */ - ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */ - ATA_FLAG_SATA_RESET = (1 << 7), /* (obsolete) use COMRESET */ - ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */ - ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once - * proper HSM is in place. */ - ATA_FLAG_DEBUGMSG = (1 << 10), - ATA_FLAG_NO_ATAPI = (1 << 11), /* No ATAPI support */ + ATA_FLAG_SATA = (1 << 1), + ATA_FLAG_NO_LEGACY = (1 << 2), /* no legacy mode check */ + ATA_FLAG_MMIO = (1 << 3), /* use MMIO, not PIO */ + ATA_FLAG_SRST = (1 << 4), /* (obsolete) use ATA SRST, not E.D.D. */ + ATA_FLAG_SATA_RESET = (1 << 5), /* (obsolete) use COMRESET */ + ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ + ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ + ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */ + ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD + * doesn't handle PIO interrupts */ + ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ + ATA_FLAG_HRST_TO_RESUME = (1 << 11), /* hardreset to resume phy */ + ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H + * Register FIS clearing BSY */ - ATA_FLAG_SUSPENDED = (1 << 12), /* port is suspended */ + ATA_FLAG_DEBUGMSG = (1 << 13), + ATA_FLAG_FLUSH_PORT_TASK = (1 << 14), /* flush port task */ - ATA_FLAG_PIO_LBA48 = (1 << 13), /* Host DMA engine is LBA28 only */ - ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */ + ATA_FLAG_EH_PENDING = (1 << 15), /* EH pending */ + ATA_FLAG_EH_IN_PROGRESS = (1 << 16), /* EH in progress */ + ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ + ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ + ATA_FLAG_LOADING = (1 << 19), /* boot/loading probe */ + ATA_FLAG_UNLOADING = (1 << 20), /* module is unloading */ + ATA_FLAG_SCSI_HOTPLUG = (1 << 21), /* SCSI hotplug scheduled */ - ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* Flush port task */ - ATA_FLAG_IN_EH = (1 << 16), /* EH in progress */ + ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */ + ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */ - ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ - ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ - ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */ + /* bits 24:31 of ap->flags are reserved for LLDD specific flags */ + + /* struct ata_queued_cmd flags */ + ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ + ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */ + ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */ ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE, - ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */ + ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ + ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ + + ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */ + ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */ + ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */ /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */ /* various lengths of time */ - ATA_TMOUT_PIO = 30 * HZ, ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */ ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */ - ATA_TMOUT_CDB = 30 * HZ, - ATA_TMOUT_CDB_QUICK = 5 * HZ, ATA_TMOUT_INTERNAL = 30 * HZ, ATA_TMOUT_INTERNAL_QUICK = 5 * HZ, @@ -207,21 +232,56 @@ enum { /* size of buffer to pad xfers ending on unaligned boundaries */ ATA_DMA_PAD_SZ = 4, ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE, - - /* Masks for port functions */ + + /* masks for port functions */ ATA_PORT_PRIMARY = (1 << 0), ATA_PORT_SECONDARY = (1 << 1), + + /* ering size */ + ATA_ERING_SIZE = 32, + + /* desc_len for ata_eh_info and context */ + ATA_EH_DESC_LEN = 80, + + /* reset / recovery action types */ + ATA_EH_REVALIDATE = (1 << 0), + ATA_EH_SOFTRESET = (1 << 1), + ATA_EH_HARDRESET = (1 << 2), + + ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, + ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE, + + /* ata_eh_info->flags */ + ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ + + ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ + + /* max repeat if error condition is still set after ->error_handler */ + ATA_EH_MAX_REPEAT = 5, + + /* how hard are we gonna try to probe/recover devices */ + ATA_PROBE_MAX_TRIES = 3, + ATA_EH_RESET_TRIES = 3, + ATA_EH_DEV_TRIES = 3, + + /* Drive spinup time (time from power-on to the first D2H FIS) + * in msecs - 8s currently. Failing to get ready in this time + * isn't critical. It will result in reset failure for + * controllers which can't wait for the first D2H FIS. libata + * will retry, so it just has to be long enough to spin up + * most devices. + */ + ATA_SPINUP_WAIT = 8000, }; enum hsm_task_states { - HSM_ST_UNKNOWN, - HSM_ST_IDLE, - HSM_ST_POLL, - HSM_ST_TMOUT, - HSM_ST, - HSM_ST_LAST, - HSM_ST_LAST_POLL, - HSM_ST_ERR, + HSM_ST_UNKNOWN, /* state unknown */ + HSM_ST_IDLE, /* no command on going */ + HSM_ST, /* (waiting the device to) transfer data */ + HSM_ST_LAST, /* (waiting the device to) complete command */ + HSM_ST_ERR, /* error */ + HSM_ST_FIRST, /* (waiting the device to) + write CDB or first data block */ }; enum ata_completion_errors { @@ -244,9 +304,9 @@ struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); -typedef void (*ata_probeinit_fn_t)(struct ata_port *); -typedef int (*ata_reset_fn_t)(struct ata_port *, int, unsigned int *); -typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *); +typedef int (*ata_prereset_fn_t)(struct ata_port *ap); +typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes); +typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes); struct ata_ioports { unsigned long cmd_addr; @@ -297,7 +357,8 @@ struct ata_host_set { unsigned long flags; int simplex_claimed; /* Keep seperate in case we ever need to do this locked */ - struct ata_port * ports[0]; + struct ata_host_set *next; /* for legacy mode */ + struct ata_port *ports[0]; }; struct ata_queued_cmd { @@ -336,7 +397,7 @@ struct ata_queued_cmd { struct scatterlist *__sg; unsigned int err_mask; - + struct ata_taskfile result_tf; ata_qc_cb_t complete_fn; void *private_data; @@ -348,12 +409,26 @@ struct ata_host_stats { unsigned long rw_reqbuf; }; +struct ata_ering_entry { + int is_io; + unsigned int err_mask; + u64 timestamp; +}; + +struct ata_ering { + int cursor; + struct ata_ering_entry ring[ATA_ERING_SIZE]; +}; + struct ata_device { - u64 n_sectors; /* size of device, if ATA */ - unsigned long flags; /* ATA_DFLAG_xxx */ - unsigned int class; /* ATA_DEV_xxx */ + struct ata_port *ap; unsigned int devno; /* 0 or 1 */ - u16 *id; /* IDENTIFY xxx DEVICE data */ + unsigned long flags; /* ATA_DFLAG_xxx */ + struct scsi_device *sdev; /* attached SCSI device */ + /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ + u64 n_sectors; /* size of device, if ATA */ + unsigned int class; /* ATA_DEV_xxx */ + u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ u8 pio_mode; u8 dma_mode; u8 xfer_mode; @@ -373,11 +448,42 @@ struct ata_device { u16 cylinders; /* Number of cylinders */ u16 heads; /* Number of heads */ u16 sectors; /* Number of sectors per track */ + + /* error history */ + struct ata_ering ering; +}; + +/* Offset into struct ata_device. Fields above it are maintained + * acress device init. Fields below are zeroed. + */ +#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors) + +struct ata_eh_info { + struct ata_device *dev; /* offending device */ + u32 serror; /* SError from LLDD */ + unsigned int err_mask; /* port-wide err_mask */ + unsigned int action; /* ATA_EH_* action mask */ + unsigned int dev_action[ATA_MAX_DEVICES]; /* dev EH action */ + unsigned int flags; /* ATA_EHI_* flags */ + + unsigned long hotplug_timestamp; + unsigned int probe_mask; + + char desc[ATA_EH_DESC_LEN]; + int desc_len; +}; + +struct ata_eh_context { + struct ata_eh_info i; + int tries[ATA_MAX_DEVICES]; + unsigned int classes[ATA_MAX_DEVICES]; + unsigned int did_probe_mask; }; struct ata_port { struct Scsi_Host *host; /* our co-allocated scsi host */ const struct ata_port_operations *ops; + spinlock_t *lock; unsigned long flags; /* ATA_FLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ @@ -397,26 +503,40 @@ struct ata_port { unsigned int mwdma_mask; unsigned int udma_mask; unsigned int cbl; /* cable type; ATA_CBL_xxx */ + unsigned int hw_sata_spd_limit; + unsigned int sata_spd_limit; /* SATA PHY speed limit */ + + /* record runtime error info, protected by host_set lock */ + struct ata_eh_info eh_info; + /* EH context owned by EH */ + struct ata_eh_context eh_context; struct ata_device device[ATA_MAX_DEVICES]; struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; - unsigned long qactive; + unsigned long qc_allocated; + unsigned int qc_active; + unsigned int active_tag; + u32 sactive; struct ata_host_stats stats; struct ata_host_set *host_set; struct device *dev; struct work_struct port_task; + struct work_struct hotplug_task; + struct work_struct scsi_rescan_task; unsigned int hsm_task_state; - unsigned long pio_task_timeout; u32 msg_enable; struct list_head eh_done_q; + wait_queue_head_t eh_wait_q; void *private_data; + + u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ }; struct ata_port_operations { @@ -438,7 +558,6 @@ struct ata_port_operations { void (*phy_reset) (struct ata_port *ap); /* obsolete */ void (*set_mode) (struct ata_port *ap); - int (*probe_reset) (struct ata_port *ap, unsigned int *classes); void (*post_set_mode) (struct ata_port *ap); @@ -447,10 +566,20 @@ struct ata_port_operations { void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); + void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); + void (*qc_prep) (struct ata_queued_cmd *qc); unsigned int (*qc_issue) (struct ata_queued_cmd *qc); - void (*eng_timeout) (struct ata_port *ap); + /* Error handlers. ->error_handler overrides ->eng_timeout and + * indicates that new-style EH is in place. + */ + void (*eng_timeout) (struct ata_port *ap); /* obsolete */ + + void (*freeze) (struct ata_port *ap); + void (*thaw) (struct ata_port *ap); + void (*error_handler) (struct ata_port *ap); + void (*post_internal_cmd) (struct ata_queued_cmd *qc); irqreturn_t (*irq_handler)(int, void *, struct pt_regs *); void (*irq_clear) (struct ata_port *); @@ -492,22 +621,22 @@ struct ata_timing { #define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) +extern const unsigned long sata_deb_timing_boot[]; +extern const unsigned long sata_deb_timing_eh[]; +extern const unsigned long sata_deb_timing_before_fsrst[]; + extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); extern void sata_phy_reset(struct ata_port *ap); extern void ata_bus_reset(struct ata_port *ap); -extern int ata_drive_probe_reset(struct ata_port *ap, - ata_probeinit_fn_t probeinit, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset, unsigned int *classes); -extern void ata_std_probeinit(struct ata_port *ap); -extern int ata_std_softreset(struct ata_port *ap, int verbose, - unsigned int *classes); -extern int sata_std_hardreset(struct ata_port *ap, int verbose, - unsigned int *class); +extern int sata_set_spd(struct ata_port *ap); +extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param); +extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param); +extern int ata_std_prereset(struct ata_port *ap); +extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); +extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); -extern int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, - int post_reset); +extern int ata_dev_revalidate(struct ata_device *dev, int post_reset); extern void ata_port_disable(struct ata_port *); extern void ata_std_ports(struct ata_ioports *ioaddr); #ifdef CONFIG_PCI @@ -519,24 +648,32 @@ extern int ata_pci_device_resume(struct pci_dev *pdev); extern int ata_pci_clear_simplex(struct pci_dev *pdev); #endif /* CONFIG_PCI */ extern int ata_device_add(const struct ata_probe_ent *ent); +extern void ata_port_detach(struct ata_port *ap); extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); -extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); -extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +extern int sata_scr_valid(struct ata_port *ap); +extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val); +extern int sata_scr_write(struct ata_port *ap, int reg, u32 val); +extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val); +extern int ata_port_online(struct ata_port *ap); +extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state); -extern int ata_device_resume(struct ata_port *, struct ata_device *); -extern int ata_device_suspend(struct ata_port *, struct ata_device *, pm_message_t state); +extern int ata_device_resume(struct ata_device *); +extern int ata_device_suspend(struct ata_device *, pm_message_t state); extern int ata_ratelimit(void); extern unsigned int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, unsigned long timeout); extern void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, unsigned long delay); +extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, + unsigned long interval_msec, + unsigned long timeout_msec); /* * Default driver ops implementations @@ -550,11 +687,16 @@ extern void ata_std_dev_select (struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); -extern int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); extern void ata_host_stop (struct ata_host_set *host_set); extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs); +extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); +extern void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); +extern void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern void ata_noop_qc_prep(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc); @@ -572,17 +714,29 @@ extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); -extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern void ata_eng_timeout(struct ata_port *ap); -extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, +extern void ata_bmdma_freeze(struct ata_port *ap); +extern void ata_bmdma_thaw(struct ata_port *ap); +extern void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset); +extern void ata_bmdma_error_handler(struct ata_port *ap); +extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc); +extern int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq); +extern void ata_qc_complete(struct ata_queued_cmd *qc); +extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, + void (*finish_qc)(struct ata_queued_cmd *)); +extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); -extern struct ata_device *ata_dev_pair(struct ata_port *ap, - struct ata_device *adev); +extern void ata_scsi_slave_destroy(struct scsi_device *sdev); +extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, + int queue_depth); +extern struct ata_device *ata_dev_pair(struct ata_device *adev); /* * Timing helpers @@ -628,7 +782,64 @@ extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bit extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long); #endif /* CONFIG_PCI */ +/* + * EH + */ +extern void ata_eng_timeout(struct ata_port *ap); +extern void ata_port_schedule_eh(struct ata_port *ap); +extern int ata_port_abort(struct ata_port *ap); +extern int ata_port_freeze(struct ata_port *ap); + +extern void ata_eh_freeze_port(struct ata_port *ap); +extern void ata_eh_thaw_port(struct ata_port *ap); + +extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); +extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); + +extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset); + +/* + * printk helpers + */ +#define ata_port_printk(ap, lv, fmt, args...) \ + printk(lv"ata%u: "fmt, (ap)->id , ##args) + +#define ata_dev_printk(dev, lv, fmt, args...) \ + printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args) + +/* + * ata_eh_info helpers + */ +#define ata_ehi_push_desc(ehi, fmt, args...) do { \ + (ehi)->desc_len += scnprintf((ehi)->desc + (ehi)->desc_len, \ + ATA_EH_DESC_LEN - (ehi)->desc_len, \ + fmt , ##args); \ +} while (0) + +#define ata_ehi_clear_desc(ehi) do { \ + (ehi)->desc[0] = '\0'; \ + (ehi)->desc_len = 0; \ +} while (0) + +static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) +{ + if (ehi->flags & ATA_EHI_HOTPLUGGED) + return; + + ehi->flags |= ATA_EHI_HOTPLUGGED; + ehi->hotplug_timestamp = jiffies; + + ehi->err_mask |= AC_ERR_ATA_BUS; + ehi->action |= ATA_EH_SOFTRESET; + ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1; +} + +/* + * qc helpers + */ static inline int ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc) { @@ -671,14 +882,39 @@ static inline unsigned int ata_tag_valid(unsigned int tag) return (tag < ATA_MAX_QUEUE) ? 1 : 0; } -static inline unsigned int ata_class_present(unsigned int class) +static inline unsigned int ata_tag_internal(unsigned int tag) +{ + return tag == ATA_MAX_QUEUE - 1; +} + +static inline unsigned int ata_class_enabled(unsigned int class) { return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI; } -static inline unsigned int ata_dev_present(const struct ata_device *dev) +static inline unsigned int ata_class_disabled(unsigned int class) { - return ata_class_present(dev->class); + return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP; +} + +static inline unsigned int ata_class_absent(unsigned int class) +{ + return !ata_class_enabled(class) && !ata_class_disabled(class); +} + +static inline unsigned int ata_dev_enabled(const struct ata_device *dev) +{ + return ata_class_enabled(dev->class); +} + +static inline unsigned int ata_dev_disabled(const struct ata_device *dev) +{ + return ata_class_disabled(dev->class); +} + +static inline unsigned int ata_dev_absent(const struct ata_device *dev) +{ + return ata_class_absent(dev->class); } static inline u8 ata_chk_status(struct ata_port *ap) @@ -759,20 +995,35 @@ static inline void ata_qc_set_polling(struct ata_queued_cmd *qc) qc->tf.ctl |= ATA_NIEN; } -static inline struct ata_queued_cmd *ata_qc_from_tag (struct ata_port *ap, - unsigned int tag) +static inline struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap, + unsigned int tag) { if (likely(ata_tag_valid(tag))) return &ap->qcmd[tag]; return NULL; } -static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, unsigned int device) +static inline struct ata_queued_cmd *ata_qc_from_tag(struct ata_port *ap, + unsigned int tag) +{ + struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + + if (unlikely(!qc) || !ap->ops->error_handler) + return qc; + + if ((qc->flags & (ATA_QCFLAG_ACTIVE | + ATA_QCFLAG_FAILED)) == ATA_QCFLAG_ACTIVE) + return qc; + + return NULL; +} + +static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) { memset(tf, 0, sizeof(*tf)); - tf->ctl = ap->ctl; - if (device == 0) + tf->ctl = dev->ap->ctl; + if (dev->devno == 0) tf->device = ATA_DEVICE_OBS; else tf->device = ATA_DEVICE_OBS | ATA_DEV1; @@ -787,26 +1038,11 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->nbytes = qc->curbytes = 0; qc->err_mask = 0; - ata_tf_init(qc->ap, &qc->tf, qc->dev->devno); -} + ata_tf_init(qc->dev, &qc->tf); -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -static inline void ata_qc_complete(struct ata_queued_cmd *qc) -{ - if (unlikely(qc->flags & ATA_QCFLAG_EH_SCHEDULED)) - return; - - __ata_qc_complete(qc); + /* init result_tf such that it indicates normal completion */ + qc->result_tf.command = ATA_DRDY; + qc->result_tf.feature = 0; } /** @@ -885,28 +1121,6 @@ static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) return status; } -static inline u32 scr_read(struct ata_port *ap, unsigned int reg) -{ - return ap->ops->scr_read(ap, reg); -} - -static inline void scr_write(struct ata_port *ap, unsigned int reg, u32 val) -{ - ap->ops->scr_write(ap, reg, val); -} - -static inline void scr_write_flush(struct ata_port *ap, unsigned int reg, - u32 val) -{ - ap->ops->scr_write(ap, reg, val); - (void) ap->ops->scr_read(ap, reg); -} - -static inline unsigned int sata_dev_present(struct ata_port *ap) -{ - return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0; -} - static inline int ata_try_flush_cache(const struct ata_device *dev) { return ata_id_wcache_enabled(dev->id) || @@ -916,7 +1130,7 @@ static inline int ata_try_flush_cache(const struct ata_device *dev) static inline unsigned int ac_err_mask(u8 status) { - if (status & ATA_BUSY) + if (status & (ATA_BUSY | ATA_DRQ)) return AC_ERR_HSM; if (status & (ATA_ERR | ATA_DF)) return AC_ERR_DEV; @@ -944,4 +1158,9 @@ static inline void ata_pad_free(struct ata_port *ap, struct device *dev) dma_free_coherent(dev, ATA_DMA_PAD_BUF_SZ, ap->pad, ap->pad_dma); } +static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host) +{ + return (struct ata_port *) &host->hostdata[0]; +} + #endif /* __LINUX_LIBATA_H__ */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index cde701c13c77..c2fd2d19938b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1196,8 +1196,12 @@ #define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 #define PCI_DEVICE_ID_NVIDIA_NVENET_16 0x03E5 #define PCI_DEVICE_ID_NVIDIA_NVENET_17 0x03E6 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA 0x03E7 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE 0x03EC #define PCI_DEVICE_ID_NVIDIA_NVENET_18 0x03EE #define PCI_DEVICE_ID_NVIDIA_NVENET_19 0x03EF +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2 0x03F6 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3 0x03F7 #define PCI_DEVICE_ID_NVIDIA_NVENET_20 0x0450 #define PCI_DEVICE_ID_NVIDIA_NVENET_21 0x0451 #define PCI_DEVICE_ID_NVIDIA_NVENET_22 0x0452 @@ -1255,6 +1259,7 @@ #define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259 #define PCI_DEVICE_ID_VIA_3269_0 0x0269 #define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282 +#define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8363_0 0x0305 #define PCI_DEVICE_ID_VIA_P4M800CE 0x0314 #define PCI_DEVICE_ID_VIA_8371_0 0x0391 @@ -1262,6 +1267,7 @@ #define PCI_DEVICE_ID_VIA_82C561 0x0561 #define PCI_DEVICE_ID_VIA_82C586_1 0x0571 #define PCI_DEVICE_ID_VIA_82C576 0x0576 +#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x0581 #define PCI_DEVICE_ID_VIA_82C586_0 0x0586 #define PCI_DEVICE_ID_VIA_82C596 0x0596 #define PCI_DEVICE_ID_VIA_82C597_0 0x0597 @@ -1302,10 +1308,11 @@ #define PCI_DEVICE_ID_VIA_8783_0 0x3208 #define PCI_DEVICE_ID_VIA_8237 0x3227 #define PCI_DEVICE_ID_VIA_8251 0x3287 -#define PCI_DEVICE_ID_VIA_3296_0 0x0296 +#define PCI_DEVICE_ID_VIA_8237A 0x3337 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 #define PCI_DEVICE_ID_VIA_8365_1 0x8305 +#define PCI_DEVICE_ID_VIA_CX700 0x8324 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index b0caabec1bd1..e46cd404bd7d 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -145,6 +145,7 @@ extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int); extern void scsi_finish_command(struct scsi_cmnd *cmd); +extern void scsi_req_abort_cmd(struct scsi_cmnd *cmd); extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count, size_t *offset, size_t *len); diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index de6ce541a046..a42efd6e4be8 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -472,6 +472,7 @@ struct Scsi_Host { */ unsigned int host_busy; /* commands actually active on low-level */ unsigned int host_failed; /* commands that failed. */ + unsigned int host_eh_scheduled; /* EH scheduled without command */ unsigned short host_no; /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */ int resetting; /* if set, it means that last_reset is a valid value */