redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

[MIPS] PMC MSP71xx PCI support 

Patch to add PCI support for the PMC-Sierra MSP71xx devices.

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
hifive-unleashed-5.1
Marc St-Jean 2007-06-14 15:56:23 -06:00 committed by Ralf Baechle
parent 9267a30d1d
commit 6f95e60acf
5 changed files with 1468 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
arch/mips/pci/Makefile
View File

@ -32,6 +32,9 @@ obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
pci-yosemite.o
obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o

216
arch/mips/pci/fixup-pmcmsp.c 100644
View File

@ -0,0 +1,216 @@
/*
* PMC-Sierra MSP board specific pci fixups.
*
* Copyright 2001 MontaVista Software Inc.
* Copyright 2005-2007 PMC-Sierra, Inc
*
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef CONFIG_PCI
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/byteorder.h>
#include <msp_pci.h>
#include <msp_cic_int.h>
/* PCI interrupt pins */
#define IRQ4 MSP_INT_EXT4
#define IRQ5 MSP_INT_EXT5
#define IRQ6 MSP_INT_EXT6
#if defined(CONFIG_PMC_MSP7120_GW)
/* Garibaldi Board IRQ wiring to PCI slots */
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
{0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
{0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
{0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
{0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
{0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
{0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
{0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
{0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
{0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
{0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
{0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
{0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
{0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
{0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
{0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
{0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
{0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
{0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
{0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */
{0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
{0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */
{0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */
};
#elif defined(CONFIG_PMC_MSP7120_EVAL)
/* MSP7120 Eval Board IRQ wiring to PCI slots */
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
{0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
{0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
{0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
{0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
{0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
{0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
{0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */
{0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */
{0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */
{0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */
{0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
{0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
{0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
{0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
{0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
{0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
{0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
{0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
{0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
{0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
{0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
{0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
};
#else
/* Unknown board -- don't assign any IRQs */
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
{0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
{0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
{0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
{0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
{0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
{0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
{0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
{0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
{0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
{0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
{0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
{0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
{0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
{0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
{0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
{0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
{0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
{0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
{0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
{0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
{0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
{0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
};
#endif
/*****************************************************************************
*
* FUNCTION: pcibios_plat_dev_init
* _________________________________________________________________________
*
* DESCRIPTION: Perform platform specific device initialization at
* pci_enable_device() time.
* None are needed for the MSP7120 PCI Controller.
*
* INPUTS: dev - structure describing the PCI device
*
* OUTPUTS: none
*
* RETURNS: PCIBIOS_SUCCESSFUL
*
****************************************************************************/
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: pcibios_map_irq
* _________________________________________________________________________
*
* DESCRIPTION: Perform board supplied PCI IRQ mapping routine.
*
* INPUTS: dev - unused
* slot - PCI slot. Identified by which bit of the AD[] bus
* drives the IDSEL line. AD[10] is 0, AD[31] is
* slot 21.
* pin - numbered using the scheme of the PCI_INTERRUPT_PIN
* field of the config header.
*
* OUTPUTS: none
*
* RETURNS: IRQ number
*
****************************************************************************/
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
#endif
printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n",
irq_tab[slot][pin], slot, pin);
return irq_tab[slot][pin];
}
#endif /* CONFIG_PCI */

994
arch/mips/pci/ops-pmcmsp.c 100644
View File

@ -0,0 +1,994 @@
/*
* PMC-Sierra MSP board specific pci_ops
*
* Copyright 2001 MontaVista Software Inc.
* Copyright 2005-2007 PMC-Sierra, Inc
*
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* Much of the code is derived from the original DDB5074 port by
* Geert Uytterhoeven <geert@sonycom.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#define PCI_COUNTERS 1
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/byteorder.h>
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
#include <asm/mipsmtregs.h>
#endif
#include <msp_prom.h>
#include <msp_cic_int.h>
#include <msp_pci.h>
#include <msp_regs.h>
#include <msp_regops.h>
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
static char proc_init;
extern struct proc_dir_entry *proc_bus_pci_dir;
unsigned int pci_int_count[32];
static void pci_proc_init(void);
/*****************************************************************************
*
* FUNCTION: read_msp_pci_counts
* _________________________________________________________________________
*
* DESCRIPTION: Prints the count of how many times each PCI
* interrupt has asserted. Can be invoked by the
* /proc filesystem.
*
* INPUTS: page - part of STDOUT calculation
* off - part of STDOUT calculation
* count - part of STDOUT calculation
* data - unused
*
* OUTPUTS: start - new start location
* eof - end of file pointer
*
* RETURNS: len - STDOUT length
*
****************************************************************************/
static int read_msp_pci_counts(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
int i;
int len = 0;
unsigned int intcount, total = 0;
for (i = 0; i < 32; ++i) {
intcount = pci_int_count[i];
if (intcount != 0) {
len += sprintf(page + len, "[%d] = %u\n", i, intcount);
total += intcount;
}
}
len += sprintf(page + len, "total = %u\n", total);
if (len <= off+count)
*eof = 1;
*start = page + off;
len -= off;
if (len > count)
len = count;
if (len < 0)
len = 0;
return len;
}
/*****************************************************************************
*
* FUNCTION: gen_pci_cfg_wr
* _________________________________________________________________________
*
* DESCRIPTION: Generates a configuration write cycle for debug purposes.
* The IDSEL line asserted and location and data written are
* immaterial. Just want to be able to prove that a
* configuration write can be correctly generated on the
* PCI bus. Intent is that this function by invocable from
* the /proc filesystem.
*
* INPUTS: page - part of STDOUT calculation
* off - part of STDOUT calculation
* count - part of STDOUT calculation
* data - unused
*
* OUTPUTS: start - new start location
* eof - end of file pointer
*
* RETURNS: len - STDOUT length
*
****************************************************************************/
static int gen_pci_cfg_wr(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
unsigned char where = 0; /* Write to static Device/Vendor ID */
unsigned char bus_num = 0; /* Bus 0 */
unsigned char dev_fn = 0xF; /* Arbitrary device number */
u32 wr_data = 0xFF00AA00; /* Arbitrary data */
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
int len = 0;
unsigned long value;
int intr;
len += sprintf(page + len, "PMC MSP PCI: Beginning\n");
if (proc_init == 0) {
pci_proc_init();
proc_init = ~0;
}
len += sprintf(page + len, "PMC MSP PCI: Before Cfg Wr\n");
/*
* Generate PCI Configuration Write Cycle
*/
/* Clear cause register bits */
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
/* Setup address that is to appear on PCI bus */
preg->config_addr = BPCI_CFGADDR_ENABLE |
(bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
(dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
(where & 0xFC);
value = cpu_to_le32(wr_data);
/* Launch the PCI configuration write cycle */
*PCI_CONFIG_SPACE_REG = value;
/*
* Check if the PCI configuration cycle (rd or wr) succeeded, by
* checking the status bits for errors like master or target abort.
*/
intr = preg->if_status;
len += sprintf(page + len, "PMC MSP PCI: After Cfg Wr\n");
/* Handle STDOUT calculations */
if (len <= off+count)
*eof = 1;
*start = page + off;
len -= off;
if (len > count)
len = count;
if (len < 0)
len = 0;
return len;
}
/*****************************************************************************
*
* FUNCTION: pci_proc_init
* _________________________________________________________________________
*
* DESCRIPTION: Create entries in the /proc filesystem for debug access.
*
* INPUTS: none
*
* OUTPUTS: none
*
* RETURNS: none
*
****************************************************************************/
static void pci_proc_init(void)
{
create_proc_read_entry("pmc_msp_pci_rd_cnt", 0, NULL,
read_msp_pci_counts, NULL);
create_proc_read_entry("pmc_msp_pci_cfg_wr", 0, NULL,
gen_pci_cfg_wr, NULL);
}
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
spinlock_t bpci_lock = SPIN_LOCK_UNLOCKED;
/*****************************************************************************
*
* STRUCT: pci_io_resource
* _________________________________________________________________________
*
* DESCRIPTION: Defines the address range that pciauto() will use to
* assign to the I/O BARs of PCI devices.
*
* Use the start and end addresses of the MSP7120 PCI Host
* Controller I/O space, in the form that they appear on the
* PCI bus AFTER MSP7120 has performed address translation.
*
* For I/O accesses, MSP7120 ignores OATRAN and maps I/O
* accesses into the bottom 0xFFF region of address space,
* so that is the range to put into the pci_io_resource
* struct.
*
* In MSP4200, the start address was 0x04 instead of the
* expected 0x00. Will just assume there was a good reason
* for this!
*
* NOTES: Linux, by default, will assign I/O space to the lowest
* region of address space. Since MSP7120 and Linux,
* by default, have no offset in between how they map, the
* io_offset element of pci_controller struct should be set
* to zero.
* ELEMENTS:
* name - String used for a meaningful name.
*
* start - Start address of MSP7120's I/O space, as MSP7120 presents
* the address on the PCI bus.
*
* end - End address of MSP7120's I/O space, as MSP7120 presents
* the address on the PCI bus.
*
* flags - Attributes indicating the type of resource. In this case,
* indicate I/O space.
*
****************************************************************************/
static struct resource pci_io_resource = {
.name = "pci IO space",
.start = 0x04,
.end = 0x0FFF,
.flags = IORESOURCE_IO /* I/O space */
};
/*****************************************************************************
*
* STRUCT: pci_mem_resource
* _________________________________________________________________________
*
* DESCRIPTION: Defines the address range that pciauto() will use to
* assign to the memory BARs of PCI devices.
*
* The .start and .end values are dependent upon how address
* translation is performed by the OATRAN regiser.
*
* The values to use for .start and .end are the values
* in the form they appear on the PCI bus AFTER MSP7120 has
* performed OATRAN address translation.
*
* ELEMENTS:
* name - String used for a meaningful name.
*
* start - Start address of MSP7120's memory space, as MSP7120 presents
* the address on the PCI bus.
*
* end - End address of MSP7120's memory space, as MSP7120 presents
* the address on the PCI bus.
*
* flags - Attributes indicating the type of resource. In this case,
* indicate memory space.
*
****************************************************************************/
static struct resource pci_mem_resource = {
.name = "pci memory space",
.start = MSP_PCI_SPACE_BASE,
.end = MSP_PCI_SPACE_END,
.flags = IORESOURCE_MEM /* memory space */
};
/*****************************************************************************
*
* FUNCTION: bpci_interrupt
* _________________________________________________________________________
*
* DESCRIPTION: PCI status interrupt handler. Updates the count of how
* many times each status bit has been set, then clears
* the status bits. If the appropriate macros are defined,
* these counts can be viewed via the /proc filesystem.
*
* INPUTS: irq - unused
* dev_id - unused
* pt_regs - unused
*
* OUTPUTS: none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
*
****************************************************************************/
static int bpci_interrupt(int irq, void *dev_id)
{
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
unsigned int stat = preg->if_status;
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
int i;
for (i = 0; i < 32; ++i) {
if ((1 << i) & stat)
++pci_int_count[i];
}
#endif /* PROC_FS && PCI_COUNTERS */
/* printk("PCI ISR: Status=%08X\n", stat); */
/* write to clear all asserted interrupts */
preg->if_status = stat;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_config_access
* _________________________________________________________________________
*
* DESCRIPTION: Performs a PCI configuration access (rd or wr), then
* checks that the access succeeded by querying MSP7120's
* PCI status bits.
*
* INPUTS:
* access_type - kind of PCI configuration cycle to perform
* (read or write). Legal values are
* PCI_ACCESS_WRITE and PCI_ACCESS_READ.
*
* bus - pointer to the bus number of the device to
* be targetted for the configuration cycle.
* The only element of the pci_bus structure
* used is bus->number. This argument determines
* if the configuration access will be Type 0 or
* Type 1. Since MSP7120 assumes itself to be the
* PCI Host, any non-zero bus->number generates
* a Type 1 access.
*
* devfn - this is an 8-bit field. The lower three bits
* specify the function number of the device to
* be targetted for the configuration cycle, with
* all three-bit combinations being legal. The
* upper five bits specify the device number,
* with legal values being 10 to 31.
*
* where - address within the Configuration Header
* space to access.
*
* data - for write accesses, contains the data to
* write.
*
* OUTPUTS:
* data - for read accesses, contains the value read.
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - access failure
*
****************************************************************************/
int msp_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus,
unsigned int devfn,
unsigned char where,
u32 *data)
{
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
unsigned char bus_num = bus->number;
unsigned char dev_fn = (unsigned char)devfn;
unsigned long flags;
unsigned long intr;
unsigned long value;
static char pciirqflag;
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
unsigned int vpe_status;
#endif
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
if (proc_init == 0) {
pci_proc_init();
proc_init = ~0;
}
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
/*
* Just the first time this function invokes, allocate
* an interrupt line for PCI host status interrupts. The
* allocation assigns an interrupt handler to the interrupt.
*/
if (pciirqflag == 0) {
request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
bpci_interrupt,
SA_SHIRQ | SA_INTERRUPT,
"PMC MSP PCI Host",
preg);
pciirqflag = ~0;
}
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
local_irq_save(flags);
vpe_status = dvpe();
#else
spin_lock_irqsave(&bpci_lock, flags);
#endif
/*
* Clear PCI cause register bits.
*
* In Polo, the PCI Host had a dedicated DMA called the
* Block Copy (not to be confused with the general purpose Block
* Copy Engine block). There appear to have been special interrupts
* for this Block Copy, called Block Copy 0 Fault (BC0F) and
* Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
* dedicated Block Copy block, so these two interrupts are now
* marked reserved. In case the Block Copy is resurrected in a
* future design, maintain the code that treats these two interrupts
* specially.
*
* Write to clear all interrupts in the PCI status register, aside
* from BC0F and BC1F.
*/
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
/* Setup address that is to appear on PCI bus */
preg->config_addr = BPCI_CFGADDR_ENABLE |
(bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
(dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
(where & 0xFC);
/* IF access is a PCI configuration write */
if (access_type == PCI_ACCESS_WRITE) {
value = cpu_to_le32(*data);
*PCI_CONFIG_SPACE_REG = value;
} else {
/* ELSE access is a PCI configuration read */
value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
*data = value;
}
/*
* Check if the PCI configuration cycle (rd or wr) succeeded, by
* checking the status bits for errors like master or target abort.
*/
intr = preg->if_status;
/* Clear config access */
preg->config_addr = 0;
/* IF error occurred */
if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
/* Clear status bits */
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
evpe(vpe_status);
local_irq_restore(flags);
#else
spin_unlock_irqrestore(&bpci_lock, flags);
#endif
return -1;
}
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
evpe(vpe_status);
local_irq_restore(flags);
#else
spin_unlock_irqrestore(&bpci_lock, flags);
#endif
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config_byte
* _________________________________________________________________________
*
* DESCRIPTION: Read a byte from PCI configuration address spac
* Since the hardware can't address 8 bit chunks
* directly, read a 32-bit chunk, then mask off extraneous
* bits.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the read is destined for.
* devfn - device/function combination that the read is
* destined for.
* where - register within the Configuration Header space
* to access.
*
* OUTPUTS val - read data
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - read access failure
*
****************************************************************************/
static int
msp_pcibios_read_config_byte(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 *val)
{
u32 data = 0;
/*
* If the config access did not complete normally (e.g., underwent
* master abort) do the PCI compliant thing, which is to supply an
* all ones value.
*/
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data)) {
*val = 0xFFFFFFFF;
return -1;
}
*val = (data >> ((where & 3) << 3)) & 0x0ff;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config_word
* _________________________________________________________________________
*
* DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
* Since the hardware can't address 16 bit chunks
* directly, read a 32-bit chunk, then mask off extraneous
* bits.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the read is destined for.
* devfn - device/function combination that the read is
* destined for.
* where - register within the Configuration Header space
* to access.
*
* OUTPUTS val - read data
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - read access failure
*
****************************************************************************/
static int
msp_pcibios_read_config_word(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 *val)
{
u32 data = 0;
/* if (where & 1) */ /* Commented out non-compliant code.
* Should allow word access to configuration
* registers, with only exception being when
* the word access would wrap around into
* the next dword.
*/
if ((where & 3) == 3) {
*val = 0xFFFFFFFF;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
/*
* If the config access did not complete normally (e.g., underwent
* master abort) do the PCI compliant thing, which is to supply an
* all ones value.
*/
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data)) {
*val = 0xFFFFFFFF;
return -1;
}
*val = (data >> ((where & 3) << 3)) & 0x0ffff;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config_dword
* _________________________________________________________________________
*
* DESCRIPTION: Read a double word (32 bits) from PCI configuration
* address space.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the read is destined for.
* devfn - device/function combination that the read is
* destined for.
* where - register within the Configuration Header space
* to access.
*
* OUTPUTS val - read data
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - read access failure
*
****************************************************************************/
static int
msp_pcibios_read_config_dword(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 *val)
{
u32 data = 0;
/* Address must be dword aligned. */
if (where & 3) {
*val = 0xFFFFFFFF;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
/*
* If the config access did not complete normally (e.g., underwent
* master abort) do the PCI compliant thing, which is to supply an
* all ones value.
*/
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data)) {
*val = 0xFFFFFFFF;
return -1;
}
*val = data;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config_byte
* _________________________________________________________________________
*
* DESCRIPTION: Write a byte to PCI configuration address space.
* Since the hardware can't address 8 bit chunks
* directly, a read-modify-write is performed.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* val - value to write
*
* OUTPUTS none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - write access failure
*
****************************************************************************/
static int
msp_pcibios_write_config_byte(struct pci_bus *bus,
unsigned int devfn,
int where,
u8 val)
{
u32 data = 0;
/* read config space */
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data))
return -1;
/* modify the byte within the dword */
data = (data & ~(0xff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
/* write back the full dword */
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config_word
* _________________________________________________________________________
*
* DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
* Since the hardware can't address 16 bit chunks
* directly, a read-modify-write is performed.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* val - value to write
*
* OUTPUTS none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - write access failure
*
****************************************************************************/
static int
msp_pcibios_write_config_word(struct pci_bus *bus,
unsigned int devfn,
int where,
u16 val)
{
u32 data = 0;
/* Fixed non-compliance: if (where & 1) */
if ((where & 3) == 3)
return PCIBIOS_BAD_REGISTER_NUMBER;
/* read config space */
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data))
return -1;
/* modify the word within the dword */
data = (data & ~(0xffff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
/* write back the full dword */
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config_dword
* _________________________________________________________________________
*
* DESCRIPTION: Write a double word (32-bits) to PCI configuration address
* space.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* val - value to write
*
* OUTPUTS none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - write access failure
*
****************************************************************************/
static int
msp_pcibios_write_config_dword(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 val)
{
/* check that address is dword aligned */
if (where & 3)
return PCIBIOS_BAD_REGISTER_NUMBER;
/* perform write */
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
where, &val))
return -1;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config
* _________________________________________________________________________
*
* DESCRIPTION: Interface the PCI configuration read request with
* the appropriate function, based on how many bytes
* the read request is.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* size - in units of bytes, should be 1, 2, or 4.
*
* OUTPUTS val - value read, with any extraneous bytes masked
* to zero.
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - failure
*
****************************************************************************/
int
msp_pcibios_read_config(struct pci_bus *bus,
unsigned int devfn,
int where,
int size,
u32 *val)
{
if (size == 1) {
if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
return -1;
}
} else if (size == 2) {
if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
return -1;
}
} else if (size == 4) {
if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
return -1;
}
} else {
*val = 0xFFFFFFFF;
return -1;
}
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config
* _________________________________________________________________________
*
* DESCRIPTION: Interface the PCI configuration write request with
* the appropriate function, based on how many bytes
* the read request is.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* size - in units of bytes, should be 1, 2, or 4.
* val - value to write
*
* OUTPUTS: none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - failure
*
****************************************************************************/
int
msp_pcibios_write_config(struct pci_bus *bus,
unsigned int devfn,
int where,
int size,
u32 val)
{
if (size == 1) {
if (msp_pcibios_write_config_byte(bus, devfn,
where, (u8)(0xFF & val))) {
return -1;
}
} else if (size == 2) {
if (msp_pcibios_write_config_word(bus, devfn,
where, (u16)(0xFFFF & val))) {
return -1;
}
} else if (size == 4) {
if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
return -1;
}
} else {
return -1;
}
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* STRUCTURE: msp_pci_ops
* _________________________________________________________________________
*
* DESCRIPTION: structure to abstract the hardware specific PCI
* configuration accesses.
*
* ELEMENTS:
* read - function for Linux to generate PCI Configuration reads.
* write - function for Linux to generate PCI Configuration writes.
*
****************************************************************************/
struct pci_ops msp_pci_ops = {
.read = msp_pcibios_read_config,
.write = msp_pcibios_write_config
};
/*****************************************************************************
*
* STRUCTURE: msp_pci_controller
* _________________________________________________________________________
*
* Describes the attributes of the MSP7120 PCI Host Controller
*
* ELEMENTS:
* pci_ops - abstracts the hardware specific PCI configuration
* accesses.
*
* mem_resource - address range pciauto() uses to assign to PCI device
* memory BARs.
*
* mem_offset - offset between how MSP7120 outbound PCI memory
* transaction addresses appear on the PCI bus and how Linux
* wants to configure memory BARs of the PCI devices.
* MSP7120 does nothing funky, so just set to zero.
*
* io_resource - address range pciauto() uses to assign to PCI device
* I/O BARs.
*
* io_offset - offset between how MSP7120 outbound PCI I/O
* transaction addresses appear on the PCI bus and how
* Linux defaults to configure I/O BARs of the PCI devices.
* MSP7120 maps outbound I/O accesses into the bottom
* bottom 4K of PCI address space (and ignores OATRAN).
* Since the Linux default is to configure I/O BARs to the
* bottom 4K, no special offset is needed. Just set to zero.
*
****************************************************************************/
static struct pci_controller msp_pci_controller = {
.pci_ops = &msp_pci_ops,
.mem_resource = &pci_mem_resource,
.mem_offset = 0,
.io_resource = &pci_io_resource,
.io_offset = 0
};
/*****************************************************************************
*
* FUNCTION: msp_pci_init
* _________________________________________________________________________
*
* DESCRIPTION: Initialize the PCI Host Controller and register it with
* Linux so Linux can seize control of the PCI bus.
*
****************************************************************************/
void __init msp_pci_init(void)
{
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
u32 id;
/* Extract Device ID */
id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
/* Check if JTAG ID identifies MSP7120 */
if (!MSP_HAS_PCI(id)) {
printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
goto no_pci;
}
/*
* Enable flushing of the PCI-SDRAM queue upon a read
* of the SDRAM's Memory Configuration Register.
*/
*(unsigned long *)QFLUSH_REG_1 = 3;
/* Configure PCI Host Controller. */
preg->if_status = ~0; /* Clear cause register bits */
preg->config_addr = 0; /* Clear config access */
preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
/* configure so inb(), outb(), and family are functional */
set_io_port_base(MSP_PCI_IOSPACE_BASE);
/* Tell Linux the details of the MSP7120 PCI Host Controller */
register_pci_controller(&msp_pci_controller);
return;
no_pci:
/* Disable PCI channel */
printk(KERN_WARNING "PCI: no host PCI bus detected\n");
}

50
arch/mips/pmc-sierra/msp71xx/msp_pci.c 100644
View File

@ -0,0 +1,50 @@
/*
* The setup file for PCI related hardware on PMC-Sierra MSP processors.
*
* Copyright 2005-2006 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <msp_prom.h>
#include <msp_regs.h>
extern void msp_pci_init(void);
static int __init msp_pci_setup(void)
{
#if 0 /* Linux 2.6 initialization code to be completed */
if (getdeviceid() & DEV_ID_SINGLE_PC) {
/* If single card mode */
slmRegs *sreg = (slmRegs *) SREG_BASE;
sreg->single_pc_enable = SINGLE_PCCARD;
}
#endif
msp_pci_init();
return 0;
}
subsys_initcall(msp_pci_setup);

205
include/asm-mips/pmc-sierra/msp71xx/msp_pci.h 100644
View File

@ -0,0 +1,205 @@
/*
* Copyright (c) 2000-2006 PMC-Sierra INC.
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General
* Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be
* useful, but WITHOUT ANY WARRANTY; without even the implied
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the Free
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
* 02139, USA.
*
* PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
* SOFTWARE.
*/
#ifndef _MSP_PCI_H_
#define _MSP_PCI_H_
#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
/*
* It is convenient to program the OATRAN register so that
* Athena virtual address space and PCI address space are
* the same. This is not a requirement, just a convenience.
*
* The only hard restrictions on the value of OATRAN is that
* OATRAN must not be programmed to allow translated memory
* addresses to fall within the lowest 512MB of
* PCI address space. This region is hardcoded
* for use as Athena PCI Host Controller target
* access memory space to the Athena's SDRAM.
*
* Note that OATRAN applies only to memory accesses, not
* to I/O accesses.
*
* To program OATRAN to make Athena virtual address space
* and PCI address space have the same values, OATRAN
* is to be programmed to 0xB8000000. The top seven
* bits of the value mimic the seven bits clipped off
* by the PCI Host controller.
*
* With OATRAN at the said value, when the CPU does
* an access to its virtual address at, say 0xB900_5000,
* the address appearing on the PCI bus will be
* 0xB900_5000.
* - Michael Penner
*/
#define MSP_PCI_OATRAN 0xB8000000UL
#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL)
#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000)
#define MSP_PCI_SPACE_END \
(MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL)
#define MSP_PCI_IOSPACE_SIZE 0x1000
#define MSP_PCI_IOSPACE_END \
(MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
/* IRQ for PCI status interrupts */
#define PCI_STAT_IRQ 20
#define QFLUSH_REG_1 0xB7F40000
typedef volatile unsigned int pcireg;
typedef void * volatile ppcireg;
struct pci_block_copy
{
pcireg unused1; /* +0x00 */
pcireg unused2; /* +0x04 */
ppcireg unused3; /* +0x08 */
ppcireg unused4; /* +0x0C */
pcireg unused5; /* +0x10 */
pcireg unused6; /* +0x14 */
pcireg unused7; /* +0x18 */
ppcireg unused8; /* +0x1C */
ppcireg unused9; /* +0x20 */
pcireg unusedA; /* +0x24 */
ppcireg unusedB; /* +0x28 */
ppcireg unusedC; /* +0x2C */
};
enum
{
config_device_vendor, /* 0 */
config_status_command, /* 1 */
config_class_revision, /* 2 */
config_BIST_header_latency_cache, /* 3 */
config_BAR0, /* 4 */
config_BAR1, /* 5 */
config_BAR2, /* 6 */
config_not_used7, /* 7 */
config_not_used8, /* 8 */
config_not_used9, /* 9 */
config_CIS, /* 10 */
config_subsystem, /* 11 */
config_not_used12, /* 12 */
config_capabilities, /* 13 */
config_not_used14, /* 14 */
config_lat_grant_irq, /* 15 */
config_message_control,/* 16 */
config_message_addr, /* 17 */
config_message_data, /* 18 */
config_VPD_addr, /* 19 */
config_VPD_data, /* 20 */
config_maxregs /* 21 - number of registers */
};
struct msp_pci_regs
{
pcireg hop_unused_00; /* +0x00 */
pcireg hop_unused_04; /* +0x04 */
pcireg hop_unused_08; /* +0x08 */
pcireg hop_unused_0C; /* +0x0C */
pcireg hop_unused_10; /* +0x10 */
pcireg hop_unused_14; /* +0x14 */
pcireg hop_unused_18; /* +0x18 */
pcireg hop_unused_1C; /* +0x1C */
pcireg hop_unused_20; /* +0x20 */
pcireg hop_unused_24; /* +0x24 */
pcireg hop_unused_28; /* +0x28 */
pcireg hop_unused_2C; /* +0x2C */
pcireg hop_unused_30; /* +0x30 */
pcireg hop_unused_34; /* +0x34 */
pcireg if_control; /* +0x38 */
pcireg oatran; /* +0x3C */
pcireg reset_ctl; /* +0x40 */
pcireg config_addr; /* +0x44 */
pcireg hop_unused_48; /* +0x48 */
pcireg msg_signaled_int_status; /* +0x4C */
pcireg msg_signaled_int_mask; /* +0x50 */
pcireg if_status; /* +0x54 */
pcireg if_mask; /* +0x58 */
pcireg hop_unused_5C; /* +0x5C */
pcireg hop_unused_60; /* +0x60 */
pcireg hop_unused_64; /* +0x64 */
pcireg hop_unused_68; /* +0x68 */
pcireg hop_unused_6C; /* +0x6C */
pcireg hop_unused_70; /* +0x70 */
struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
pcireg error_hdr1; /* +0xE0 */
pcireg error_hdr2; /* +0xE4 */
pcireg config[config_maxregs] __attribute__((aligned(256)));
};
#define BPCI_CFGADDR_BUSNUM_SHF 16
#define BPCI_CFGADDR_FUNCTNUM_SHF 8
#define BPCI_CFGADDR_REGNUM_SHF 2
#define BPCI_CFGADDR_ENABLE (1<<31)
#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */
#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */
#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */
#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */
#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */
#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */
#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */
#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */
#define BPCI_IFSTATUS_SER (1<<19) /* System error */
#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */
#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */
#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */
#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */
#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */
#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */
#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */
#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */
#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */
#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */
#define BPCI_RESETCTL_RT (1<<4) /* Release time */
#define BPCI_RESETCTL_CT (1<<8) /* Config time */
#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */
#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */
#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */
extern struct msp_pci_regs msp_pci_regs
__attribute__((section(".register")));
extern unsigned long msp_pci_config_space
__attribute__((section(".register")));
#endif /* !_MSP_PCI_H_ */