redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...
hifive-unleashed-5.1
Linus Torvalds 2010-10-22 19:59:04 -07:00
parent b9da057105 cd3ecad19a
commit 73ecf3a6e3
66 changed files with 1756 additions and 1532 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devices.txt
View File

@ -239,6 +239,7 @@ Your cooperation is appreciated.
0 = /dev/tty Current TTY device
1 = /dev/console System console
2 = /dev/ptmx PTY master multiplex
3 = /dev/ttyprintk User messages via printk TTY device
64 = /dev/cua0 Callout device for ttyS0
...
255 = /dev/cua191 Callout device for ttyS191

32
Documentation/filesystems/proc.txt
View File

@ -1075,6 +1075,7 @@ Table 1-11: Files in /proc/tty
drivers list of drivers and their usage
ldiscs registered line disciplines
driver/serial usage statistic and status of single tty lines
consoles registered system console lines
..............................................................................
To see which tty's are currently in use, you can simply look into the file
@ -1093,6 +1094,37 @@ To see which tty's are currently in use, you can simply look into the file
/dev/tty /dev/tty 5 0 system:/dev/tty
unknown /dev/tty 4 1-63 console
To see which character device lines are currently used for the system console
/dev/console, you may simply look into the file /proc/tty/consoles:
> cat /proc/tty/consoles
tty0 -WU (ECp) 4:7
ttyS0 -W- (Ep) 4:64
The columns are:
device name of the device
operations R = can do read operations
W = can do write operations
U = can do unblank
flags E = it is enabled
C = it is prefered console
B = it is primary boot console
p = it is used for printk buffer
b = it is not a TTY but a Braille device
a = it is safe to use when cpu is offline
* = it is standard input of the reading process
major:minor major and minor number of the device separated by a colon
If the reading process holds /dev/console open at the regular standard input
stream the active device will be marked by an asterisk:
> cat /proc/tty/consoles < /dev/console
tty0 -WU (ECp*) 4:7
ttyS0 -W- (Ep) 4:64
> tty
/dev/pts/3
1.8 Miscellaneous kernel statistics in /proc/stat
-------------------------------------------------

10
MAINTAINERS
View File

@ -157,9 +157,11 @@ S: Maintained
F: drivers/net/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Orphan
S: Maintained
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
F: drivers/serial/8250*
F: include/linux/serial_8250.h
@ -3353,6 +3355,12 @@ F: fs/jbd*/
F: include/linux/ext*jbd*.h
F: include/linux/jbd*.h
JSM Neo PCI based serial card
M: Breno Leitao <leitao@linux.vnet.ibm.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/serial/jsm/
K8TEMP HARDWARE MONITORING DRIVER
M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org

83
arch/arm/include/asm/ioctls.h
View File

@ -1,89 +1,8 @@
#ifndef __ASM_ARM_IOCTLS_H
#define __ASM_ARM_IOCTLS_H
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif

86
arch/avr32/include/asm/ioctls.h
View File

@ -1,90 +1,6 @@
#ifndef __ASM_AVR32_IOCTLS_H
#define __ASM_AVR32_IOCTLS_H
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ASM_AVR32_IOCTLS_H */

84
arch/cris/include/asm/ioctls.h
View File

@ -1,93 +1,11 @@
#ifndef __ARCH_CRIS_IOCTLS_H__
#define __ARCH_CRIS_IOCTLS_H__
/* verbatim copy of asm-i386/ioctls.h */
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
#define TIOCSERWRRS485 0x5462 /* write rs-485 */
#define TIOCSRS485 0x5463 /* enable rs-485 */
#define TIOCGRS485 0x542E /* get rs-485 */
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif

80
arch/frv/include/asm/ioctls.h
View File

@ -1,88 +1,10 @@
#ifndef __ASM_IOCTLS_H__
#define __ASM_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ASM_IOCTLS_H__ */

81
arch/h8300/include/asm/ioctls.h
View File

@ -1,87 +1,8 @@
#ifndef __ARCH_H8300_IOCTLS_H__
#define __ARCH_H8300_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ARCH_H8300_IOCTLS_H__ */

12
arch/ia64/hp/sim/simserial.c
View File

@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
{
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
(cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
case TIOCMIWAIT:
printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
return 0;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
return 0;
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */

89
arch/ia64/include/asm/ioctls.h
View File

@ -1,93 +1,6 @@
#ifndef _ASM_IA64_IOCTLS_H
#define _ASM_IA64_IOCTLS_H
/*
* Based on <asm-i386/ioctls.h>
*
* Modified 1998, 1999, 2002
* David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
*/
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* _ASM_IA64_IOCTLS_H */

83
arch/m32r/include/asm/ioctls.h
View File

@ -1,87 +1,6 @@
#ifndef __ARCH_M32R_IOCTLS_H__
#define __ARCH_M32R_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ARCH_M32R_IOCTLS_H__ */

28
arch/mips/alchemy/common/platform.c
View File

@ -24,6 +24,33 @@
#include <prom.h>
static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
unsigned int old_state)
{
switch (state) {
case 0:
if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
/* power-on sequence as suggested in the databooks */
__raw_writel(0, port->membase + UART_MOD_CNTRL);
wmb();
__raw_writel(1, port->membase + UART_MOD_CNTRL);
wmb();
}
__raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
wmb();
serial8250_do_pm(port, state, old_state);
break;
case 3: /* power off */
serial8250_do_pm(port, state, old_state);
__raw_writel(0, port->membase + UART_MOD_CNTRL);
wmb();
break;
default:
serial8250_do_pm(port, state, old_state);
break;
}
}
#define PORT(_base, _irq) \
{ \
.mapbase = _base, \
@ -33,6 +60,7 @@
.flags = UPF_SKIP_TEST | UPF_IOREMAP | \
UPF_FIXED_TYPE, \
.type = PORT_16550A, \
.pm = alchemy_8250_pm, \
}
static struct plat_serial8250_port au1x00_uart_data[] = {

35
arch/mips/alchemy/common/power.c
View File

@ -49,11 +49,6 @@
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
static unsigned int sleep_uart0_inten;
static unsigned int sleep_uart0_fifoctl;
static unsigned int sleep_uart0_linectl;
static unsigned int sleep_uart0_clkdiv;
static unsigned int sleep_uart0_enable;
static unsigned int sleep_usb[2];
static unsigned int sleep_sys_clocks[5];
static unsigned int sleep_sys_pinfunc;
@ -62,22 +57,6 @@ static unsigned int sleep_static_memctlr[4][3];
static void save_core_regs(void)
{
extern void save_au1xxx_intctl(void);
extern void pm_eth0_shutdown(void);
/*
* Do the serial ports.....these really should be a pm_*
* registered function by the driver......but of course the
* standard serial driver doesn't understand our Au1xxx
* unique registers.
*/
sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
au_sync();
#ifndef CONFIG_SOC_AU1200
/* Shutdown USB host/device. */
sleep_usb[0] = au_readl(USB_HOST_CONFIG);
@ -175,20 +154,6 @@ static void restore_core_regs(void)
au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
/*
* Enable the UART if it was enabled before sleep.
* I guess I should define module control bits........
*/
if (sleep_uart0_enable & 0x02) {
au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
}
}
void au_sleep(void)

84
arch/mn10300/include/asm/ioctls.h
View File

@ -1,88 +1,6 @@
#ifndef _ASM_IOCTLS_H
#define _ASM_IOCTLS_H
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T', 0x2A, struct termios2)
#define TCSETS2 _IOW('T', 0x2B, struct termios2)
#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
* (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* _ASM_IOCTLS_H */

88
arch/s390/include/asm/ioctls.h
View File

@ -1,94 +1,8 @@
/*
* include/asm-s390/ioctls.h
*
* S390 version
*
* Derived from "include/asm-i386/ioctls.h"
*/
#ifndef __ARCH_S390_IOCTLS_H__
#define __ARCH_S390_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif

15
drivers/char/Kconfig
View File

@ -493,6 +493,21 @@ config LEGACY_PTY_COUNT
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
config TTY_PRINTK
bool "TTY driver to output user messages via printk"
depends on EMBEDDED
default n
---help---
If you say Y here, the support for writing user messages (i.e.
console messages) via printk is available.
The feature is useful to inline user messages with kernel
messages.
In order to use this feature, you should output user messages
to /dev/ttyprintk or redirect console to this TTY.
If unsure, say N.
config BRIQ_PANEL
tristate 'Total Impact briQ front panel driver'
depends on PPC_CHRP

1
drivers/char/Makefile
View File

@ -12,6 +12,7 @@ obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o t
obj-y += tty_mutex.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o
obj-y += misc.o
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o
obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o

56
drivers/char/amiserial.c
View File

@ -1263,6 +1263,36 @@ static int rs_break(struct tty_struct *tty, int break_state)
return 0;
}
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int rs_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct async_struct *info = tty->driver_data;
struct async_icount cnow;
unsigned long flags;
local_irq_save(flags);
cnow = info->state->icount;
local_irq_restore(flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
@ -1332,31 +1362,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
}
/* NOTREACHED */
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
local_irq_save(flags);
cnow = info->state->icount;
local_irq_restore(flags);
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
if (copy_to_user(argp, &icount, sizeof(icount)))
return -EFAULT;
return 0;
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
@ -1958,6 +1963,7 @@ static const struct tty_operations serial_ops = {
.wait_until_sent = rs_wait_until_sent,
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
.get_icount = rs_get_icount,
.proc_fops = &rs_proc_fops,
};

49
drivers/char/cyclades.c
View File

@ -2790,29 +2790,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT: {
struct serial_icounter_struct sic = { };
spin_lock_irqsave(&info->card->card_lock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->card->card_lock, flags);
sic.cts = cnow.cts;
sic.dsr = cnow.dsr;
sic.rng = cnow.rng;
sic.dcd = cnow.dcd;
sic.rx = cnow.rx;
sic.tx = cnow.tx;
sic.frame = cnow.frame;
sic.overrun = cnow.overrun;
sic.parity = cnow.parity;
sic.brk = cnow.brk;
sic.buf_overrun = cnow.buf_overrun;
if (copy_to_user(argp, &sic, sizeof(sic)))
ret_val = -EFAULT;
break;
}
default:
ret_val = -ENOIOCTLCMD;
}
@ -2823,6 +2800,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
return ret_val;
} /* cy_ioctl */
static int cy_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *sic)
{
struct cyclades_port *info = tty->driver_data;
struct cyclades_icount cnow; /* Used to snapshot */
unsigned long flags;
spin_lock_irqsave(&info->card->card_lock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->card->card_lock, flags);
sic->cts = cnow.cts;
sic->dsr = cnow.dsr;
sic->rng = cnow.rng;
sic->dcd = cnow.dcd;
sic->rx = cnow.rx;
sic->tx = cnow.tx;
sic->frame = cnow.frame;
sic->overrun = cnow.overrun;
sic->parity = cnow.parity;
sic->brk = cnow.brk;
sic->buf_overrun = cnow.buf_overrun;
return 0;
}
/*
* This routine allows the tty driver to be notified when
* device's termios settings have changed. Note that a
@ -4084,6 +4086,7 @@ static const struct tty_operations cy_ops = {
.wait_until_sent = cy_wait_until_sent,
.tiocmget = cy_tiocmget,
.tiocmset = cy_tiocmset,
.get_icount = cy_get_icount,
.proc_fops = &cyclades_proc_fops,
};

72
drivers/char/ip2/ip2main.c
View File

@ -184,6 +184,8 @@ static void ip2_hangup(PTTY);
static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int ip2_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
static void set_irq(int, int);
static void ip2_interrupt_bh(struct work_struct *work);
@ -456,6 +458,7 @@ static const struct tty_operations ip2_ops = {
.hangup = ip2_hangup,
.tiocmget = ip2_tiocmget,
.tiocmset = ip2_tiocmset,
.get_icount = ip2_get_icount,
.proc_fops = &ip2_proc_fops,
};
@ -2130,7 +2133,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
i2ChanStrPtr pCh = DevTable[tty->index];
i2eBordStrPtr pB;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser;
int rc = 0;
unsigned long flags;
void __user *argp = (void __user *)arg;
@ -2298,34 +2300,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
return rc;
break;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for RI where
* only 0->1 is counted. The controller is quite capable of counting
* both, but this done to preserve compatibility with the standard
* serial driver.
*/
case TIOCGICOUNT:
ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount;
write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
p_cuser = argp;
rc = put_user(cnow.cts, &p_cuser->cts);
rc = put_user(cnow.dsr, &p_cuser->dsr);
rc = put_user(cnow.rng, &p_cuser->rng);
rc = put_user(cnow.dcd, &p_cuser->dcd);
rc = put_user(cnow.rx, &p_cuser->rx);
rc = put_user(cnow.tx, &p_cuser->tx);
rc = put_user(cnow.frame, &p_cuser->frame);
rc = put_user(cnow.overrun, &p_cuser->overrun);
rc = put_user(cnow.parity, &p_cuser->parity);
rc = put_user(cnow.brk, &p_cuser->brk);
rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
break;
/*
* The rest are not supported by this driver. By returning -ENOIOCTLCMD they
* will be passed to the line discipline for it to handle.
@ -2350,6 +2324,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
return rc;
}
static int ip2_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
i2ChanStrPtr pCh = DevTable[tty->index];
i2eBordStrPtr pB;
struct async_icount cnow; /* kernel counter temp */
unsigned long flags;
if ( pCh == NULL )
return -ENODEV;
pB = pCh->pMyBord;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for RI where
* only 0->1 is counted. The controller is quite capable of counting
* both, but this done to preserve compatibility with the standard
* serial driver.
*/
write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount;
write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
/******************************************************************************/
/* Function: GetSerialInfo() */
/* Parameters: Pointer to channel structure */

109
drivers/char/mxser.c
View File

@ -1700,7 +1700,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT &&
test_bit(TTY_IO_ERROR, &tty->flags))
return -EIO;
@ -1730,32 +1730,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return wait_event_interruptible(info->port.delta_msr_wait,
mxser_cflags_changed(info, arg, &cnow));
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT: {
struct serial_icounter_struct icnt = { 0 };
spin_lock_irqsave(&info->slock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->slock, flags);
icnt.frame = cnow.frame;
icnt.brk = cnow.brk;
icnt.overrun = cnow.overrun;
icnt.buf_overrun = cnow.buf_overrun;
icnt.parity = cnow.parity;
icnt.rx = cnow.rx;
icnt.tx = cnow.tx;
icnt.cts = cnow.cts;
icnt.dsr = cnow.dsr;
icnt.rng = cnow.rng;
icnt.dcd = cnow.dcd;
return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
}
case MOXA_HighSpeedOn:
return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
case MOXA_SDS_RSTICOUNTER:
@ -1828,6 +1802,39 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int mxser_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct mxser_port *info = tty->driver_data;
struct async_icount cnow;
unsigned long flags;
spin_lock_irqsave(&info->slock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->slock, flags);
icount->frame = cnow.frame;
icount->brk = cnow.brk;
icount->overrun = cnow.overrun;
icount->buf_overrun = cnow.buf_overrun;
icount->parity = cnow.parity;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
return 0;
}
static void mxser_stoprx(struct tty_struct *tty)
{
struct mxser_port *info = tty->driver_data;
@ -2326,6 +2333,7 @@ static const struct tty_operations mxser_ops = {
.wait_until_sent = mxser_wait_until_sent,
.tiocmget = mxser_tiocmget,
.tiocmset = mxser_tiocmset,
.get_icount = mxser_get_icount,
};
struct tty_port_operations mxser_port_ops = {
@ -2339,20 +2347,11 @@ struct tty_port_operations mxser_port_ops = {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
unsigned int irq)
static void mxser_release_ISA_res(struct mxser_board *brd)
{
if (irq)
free_irq(brd->irq, brd);
if (pdev != NULL) { /* PCI */
#ifdef CONFIG_PCI
pci_release_region(pdev, 2);
pci_release_region(pdev, 3);
#endif
} else {
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
release_region(brd->vector, 1);
}
free_irq(brd->irq, brd);
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
release_region(brd->vector, 1);
}
static int __devinit mxser_initbrd(struct mxser_board *brd,
@ -2397,13 +2396,11 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
brd);
if (retval) {
if (retval)
printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
"conflict with another device.\n",
brd->info->name, brd->irq);
/* We hold resources, we need to release them. */
mxser_release_res(brd, pdev, 0);
}
return retval;
}
@ -2555,7 +2552,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 2);
retval = pci_request_region(pdev, 2, "mxser(IO)");
if (retval)
goto err;
goto err_dis;
brd->info = &mxser_cards[ent->driver_data];
for (i = 0; i < brd->info->nports; i++)
@ -2565,7 +2562,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 3);
retval = pci_request_region(pdev, 3, "mxser(vector)");
if (retval)
goto err_relio;
goto err_zero;
brd->vector = ioaddress;
/* irq */
@ -2608,7 +2605,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
/* mxser_initbrd will hook ISR. */
retval = mxser_initbrd(brd, pdev);
if (retval)
goto err_null;
goto err_rel3;
for (i = 0; i < brd->info->nports; i++)
tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
@ -2616,10 +2613,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, brd);
return 0;
err_relio:
pci_release_region(pdev, 2);
err_null:
err_rel3:
pci_release_region(pdev, 3);
err_zero:
brd->info = NULL;
pci_release_region(pdev, 2);
err_dis:
pci_disable_device(pdev);
err:
return retval;
#else
@ -2629,14 +2629,19 @@ err:
static void __devexit mxser_remove(struct pci_dev *pdev)
{
#ifdef CONFIG_PCI
struct mxser_board *brd = pci_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < brd->info->nports; i++)
tty_unregister_device(mxvar_sdriver, brd->idx + i);
mxser_release_res(brd, pdev, 1);
free_irq(pdev->irq, brd);
pci_release_region(pdev, 2);
pci_release_region(pdev, 3);
pci_disable_device(pdev);
brd->info = NULL;
#endif
}
static struct pci_driver mxser_driver = {
@ -2741,7 +2746,7 @@ static void __exit mxser_module_exit(void)
for (i = 0; i < MXSER_BOARDS; i++)
if (mxser_boards[i].info != NULL)
mxser_release_res(&mxser_boards[i], NULL, 1);
mxser_release_ISA_res(&mxser_boards[i]);
}
module_init(mxser_module_init);

35
drivers/char/nozomi.c
View File

@ -1804,24 +1804,24 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags,
return ret;
}
static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
static int ntty_tiocgicount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct port *port = tty->driver_data;
const struct async_icount cnow = port->tty_icount;
struct serial_icounter_struct icount;
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
static int ntty_ioctl(struct tty_struct *tty, struct file *file,
@ -1840,9 +1840,7 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
rval = wait_event_interruptible(port->tty_wait,
ntty_cflags_changed(port, arg, &cprev));
break;
} case TIOCGICOUNT:
rval = ntty_ioctl_tiocgicount(port, argp);
break;
}
default:
DBG1("ERR: 0x%08X, %d", cmd, cmd);
break;
@ -1922,6 +1920,7 @@ static const struct tty_operations tty_ops = {
.chars_in_buffer = ntty_chars_in_buffer,
.tiocmget = ntty_tiocmget,
.tiocmset = ntty_tiocmset,
.get_icount = ntty_tiocgicount,
.install = ntty_install,
.cleanup = ntty_cleanup,
};

60
drivers/char/pcmcia/synclink_cs.c
View File

@ -2191,6 +2191,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state)
return 0;
}
static int mgslpc_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
struct mgsl_icount cnow; /* kernel counter temps */
unsigned long flags;
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->lock,flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
/* Service an IOCTL request
*
* Arguments:
@ -2206,11 +2232,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
int error;
struct mgsl_icount cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser; /* user space */
void __user *argp = (void __user *)arg;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@ -2220,7 +2242,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
(cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@ -2250,34 +2272,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
return wait_events(info, argp);
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
case TIOCGICOUNT:
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->lock,flags);
p_cuser = argp;
PUT_USER(error,cnow.cts, &p_cuser->cts);
if (error) return error;
PUT_USER(error,cnow.dsr, &p_cuser->dsr);
if (error) return error;
PUT_USER(error,cnow.rng, &p_cuser->rng);
if (error) return error;
PUT_USER(error,cnow.dcd, &p_cuser->dcd);
if (error) return error;
PUT_USER(error,cnow.rx, &p_cuser->rx);
if (error) return error;
PUT_USER(error,cnow.tx, &p_cuser->tx);
if (error) return error;
PUT_USER(error,cnow.frame, &p_cuser->frame);
if (error) return error;
PUT_USER(error,cnow.overrun, &p_cuser->overrun);
if (error) return error;
PUT_USER(error,cnow.parity, &p_cuser->parity);
if (error) return error;
PUT_USER(error,cnow.brk, &p_cuser->brk);
if (error) return error;
PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
if (error) return error;
return 0;
default:
return -ENOIOCTLCMD;
}

4
drivers/char/pty.c
View File

@ -676,7 +676,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
tty_add_file(tty, filp);
retval = tty_add_file(tty, filp);
if (retval)
goto out;
retval = devpts_pty_new(inode, tty->link);
if (retval)

73
drivers/char/synclink.c
View File

@ -2925,6 +2925,38 @@ static int mgsl_break(struct tty_struct *tty, int break_state)
} /* end of mgsl_break() */
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int msgl_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct mgsl_struct * info = tty->driver_data;
struct mgsl_icount cnow; /* kernel counter temps */
unsigned long flags;
spin_lock_irqsave(&info->irq_spinlock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->irq_spinlock,flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
/* mgsl_ioctl() Service an IOCTL request
*
* Arguments:
@ -2949,7 +2981,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
(cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@ -2959,11 +2991,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
{
int error;
struct mgsl_icount cnow; /* kernel counter temps */
void __user *argp = (void __user *)arg;
struct serial_icounter_struct __user *p_cuser; /* user space */
unsigned long flags;
switch (cmd) {
case MGSL_IOCGPARAMS:
@ -2992,40 +3020,6 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
spin_lock_irqsave(&info->irq_spinlock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->irq_spinlock,flags);
p_cuser = argp;
PUT_USER(error,cnow.cts, &p_cuser->cts);
if (error) return error;
PUT_USER(error,cnow.dsr, &p_cuser->dsr);
if (error) return error;
PUT_USER(error,cnow.rng, &p_cuser->rng);
if (error) return error;
PUT_USER(error,cnow.dcd, &p_cuser->dcd);
if (error) return error;
PUT_USER(error,cnow.rx, &p_cuser->rx);
if (error) return error;
PUT_USER(error,cnow.tx, &p_cuser->tx);
if (error) return error;
PUT_USER(error,cnow.frame, &p_cuser->frame);
if (error) return error;
PUT_USER(error,cnow.overrun, &p_cuser->overrun);
if (error) return error;
PUT_USER(error,cnow.parity, &p_cuser->parity);
if (error) return error;
PUT_USER(error,cnow.brk, &p_cuser->brk);
if (error) return error;
PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
if (error) return error;
return 0;
default:
return -ENOIOCTLCMD;
}
@ -4328,6 +4322,7 @@ static const struct tty_operations mgsl_ops = {
.hangup = mgsl_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = msgl_get_icount,
.proc_fops = &mgsl_proc_fops,
};

55
drivers/char/synclink_gt.c
View File

@ -1032,9 +1032,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct slgt_info *info = tty->driver_data;
struct mgsl_icount cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser; /* user space */
unsigned long flags;
void __user *argp = (void __user *)arg;
int ret;
@ -1043,7 +1040,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
(cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@ -1053,24 +1050,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return wait_mgsl_event(info, argp);
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
case TIOCGICOUNT:
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->lock,flags);
p_cuser = argp;
if (put_user(cnow.cts, &p_cuser->cts) ||
put_user(cnow.dsr, &p_cuser->dsr) ||
put_user(cnow.rng, &p_cuser->rng) ||
put_user(cnow.dcd, &p_cuser->dcd) ||
put_user(cnow.rx, &p_cuser->rx) ||
put_user(cnow.tx, &p_cuser->tx) ||
put_user(cnow.frame, &p_cuser->frame) ||
put_user(cnow.overrun, &p_cuser->overrun) ||
put_user(cnow.parity, &p_cuser->parity) ||
put_user(cnow.brk, &p_cuser->brk) ||
put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
return -EFAULT;
return 0;
case MGSL_IOCSGPIO:
return set_gpio(info, argp);
case MGSL_IOCGGPIO:
@ -1117,6 +1096,33 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return ret;
}
static int get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct slgt_info *info = tty->driver_data;
struct mgsl_icount cnow; /* kernel counter temps */
unsigned long flags;
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->lock,flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
/*
* support for 32 bit ioctl calls on 64 bit systems
*/
@ -1206,10 +1212,6 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
case MGSL_IOCSGPIO:
case MGSL_IOCGGPIO:
case MGSL_IOCWAITGPIO:
case TIOCGICOUNT:
rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
break;
case MGSL_IOCSTXIDLE:
case MGSL_IOCTXENABLE:
case MGSL_IOCRXENABLE:
@ -3642,6 +3644,7 @@ static const struct tty_operations ops = {
.hangup = hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = get_icount,
.proc_fops = &synclink_gt_proc_fops,
};

61
drivers/char/synclinkmp.c
View File

@ -1258,10 +1258,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
SLMP_INFO *info = tty->driver_data;
int error;
struct mgsl_icount cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser; /* user space */
unsigned long flags;
void __user *argp = (void __user *)arg;
if (debug_level >= DEBUG_LEVEL_INFO)
@ -1272,7 +1268,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
(cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@ -1310,40 +1306,38 @@ static int ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->lock,flags);
p_cuser = argp;
PUT_USER(error,cnow.cts, &p_cuser->cts);
if (error) return error;
PUT_USER(error,cnow.dsr, &p_cuser->dsr);
if (error) return error;
PUT_USER(error,cnow.rng, &p_cuser->rng);
if (error) return error;
PUT_USER(error,cnow.dcd, &p_cuser->dcd);
if (error) return error;
PUT_USER(error,cnow.rx, &p_cuser->rx);
if (error) return error;
PUT_USER(error,cnow.tx, &p_cuser->tx);
if (error) return error;
PUT_USER(error,cnow.frame, &p_cuser->frame);
if (error) return error;
PUT_USER(error,cnow.overrun, &p_cuser->overrun);
if (error) return error;
PUT_USER(error,cnow.parity, &p_cuser->parity);
if (error) return error;
PUT_USER(error,cnow.brk, &p_cuser->brk);
if (error) return error;
PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
if (error) return error;
return 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}
static int get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
SLMP_INFO *info = tty->driver_data;
struct mgsl_icount cnow; /* kernel counter temps */
unsigned long flags;
spin_lock_irqsave(&info->lock,flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->lock,flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
/*
* /proc fs routines....
*/
@ -3909,6 +3903,7 @@ static const struct tty_operations ops = {
.hangup = hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = get_icount,
.proc_fops = &synclinkmp_proc_fops,
};

77
drivers/char/tty_io.c
View File

@ -96,6 +96,7 @@
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/uaccess.h>
#include <asm/system.h>
@ -183,6 +184,8 @@ struct tty_struct *alloc_tty_struct(void)
void free_tty_struct(struct tty_struct *tty)
{
if (tty->dev)
put_device(tty->dev);
kfree(tty->write_buf);
tty_buffer_free_all(tty);
kfree(tty);
@ -194,12 +197,13 @@ static inline struct tty_struct *file_tty(struct file *file)
}
/* Associate a new file with the tty structure */
void tty_add_file(struct tty_struct *tty, struct file *file)
int tty_add_file(struct tty_struct *tty, struct file *file)
{
struct tty_file_private *priv;
/* XXX: must implement proper error handling in callers */
priv = kmalloc(sizeof(*priv), GFP_KERNEL|__GFP_NOFAIL);
priv = kmalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->tty = tty;
priv->file = file;
@ -208,6 +212,8 @@ void tty_add_file(struct tty_struct *tty, struct file *file)
spin_lock(&tty_files_lock);
list_add(&priv->list, &tty->tty_files);
spin_unlock(&tty_files_lock);
return 0;
}
/* Delete file from its tty */
@ -1875,7 +1881,11 @@ got_driver:
return PTR_ERR(tty);
}
tty_add_file(tty, filp);
retval = tty_add_file(tty, filp);
if (retval) {
tty_unlock();
return retval;
}
check_tty_count(tty, "tty_open");
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@ -2502,6 +2512,20 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
return tty->ops->tiocmset(tty, file, set, clear);
}
static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
{
int retval = -EINVAL;
struct serial_icounter_struct icount;
memset(&icount, 0, sizeof(icount));
if (tty->ops->get_icount)
retval = tty->ops->get_icount(tty, &icount);
if (retval != 0)
return retval;
if (copy_to_user(arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
}
struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
{
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@ -2622,6 +2646,12 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case TIOCMBIC:
case TIOCMBIS:
return tty_tiocmset(tty, file, cmd, p);
case TIOCGICOUNT:
retval = tty_tiocgicount(tty, p);
/* For the moment allow fall through to the old method */
if (retval != -EINVAL)
return retval;
break;
case TCFLSH:
switch (arg) {
case TCIFLUSH:
@ -2783,6 +2813,20 @@ void do_SAK(struct tty_struct *tty)
EXPORT_SYMBOL(do_SAK);
static int dev_match_devt(struct device *dev, void *data)
{
dev_t *devt = data;
return dev->devt == *devt;
}
/* Must put_device() after it's unused! */
static struct device *tty_get_device(struct tty_struct *tty)
{
dev_t devt = tty_devnum(tty);
return class_find_device(tty_class, NULL, &devt, dev_match_devt);
}
/**
* initialize_tty_struct
* @tty: tty to initialize
@ -2823,6 +2867,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->ops = driver->ops;
tty->index = idx;
tty_line_name(driver, idx, tty->name);
tty->dev = tty_get_device(tty);
}
/**
@ -2980,6 +3025,7 @@ int tty_register_driver(struct tty_driver *driver)
int i;
dev_t dev;
void **p = NULL;
struct device *d;
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
@ -3027,12 +3073,31 @@ int tty_register_driver(struct tty_driver *driver)
mutex_unlock(&tty_mutex);
if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
for (i = 0; i < driver->num; i++)
tty_register_device(driver, i, NULL);
for (i = 0; i < driver->num; i++) {
d = tty_register_device(driver, i, NULL);
if (IS_ERR(d)) {
error = PTR_ERR(d);
goto err;
}
}
}
proc_tty_register_driver(driver);
driver->flags |= TTY_DRIVER_INSTALLED;
return 0;
err:
for (i--; i >= 0; i--)
tty_unregister_device(driver, i);
mutex_lock(&tty_mutex);
list_del(&driver->tty_drivers);
mutex_unlock(&tty_mutex);
unregister_chrdev_region(dev, driver->num);
driver->ttys = NULL;
driver->termios = NULL;
kfree(p);
return error;
}
EXPORT_SYMBOL(tty_register_driver);

225
drivers/char/ttyprintk.c 100644
View File

@ -0,0 +1,225 @@
/*
* linux/drivers/char/ttyprintk.c
*
* Copyright (C) 2010 Samo Pogacnik
*
* This program is free software; you can redistribute it and/or modify
* it under the smems of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
/*
* This pseudo device allows user to make printk messages. It is possible
* to store "console" messages inline with kernel messages for better analyses
* of the boot process, for example.
*/
#include <linux/device.h>
#include <linux/serial.h>
#include <linux/tty.h>
struct ttyprintk_port {
struct tty_port port;
struct mutex port_write_mutex;
};
static struct ttyprintk_port tpk_port;
/*
* Our simple preformatting supports transparent output of (time-stamped)
* printk messages (also suitable for logging service):
* - any cr is replaced by nl
* - adds a ttyprintk source tag in front of each line
* - too long message is fragmeted, with '\'nl between fragments
* - TPK_STR_SIZE isn't really the write_room limiting factor, bcause
* it is emptied on the fly during preformatting.
*/
#define TPK_STR_SIZE 508 /* should be bigger then max expected line length */
#define TPK_MAX_ROOM 4096 /* we could assume 4K for instance */
static const char *tpk_tag = "[U] "; /* U for User */
static int tpk_curr;
static int tpk_printk(const unsigned char *buf, int count)
{
static char tmp[TPK_STR_SIZE + 4];
int i = tpk_curr;
if (buf == NULL) {
/* flush tmp[] */
if (tpk_curr > 0) {
/* non nl or cr terminated message - add nl */
tmp[tpk_curr + 0] = '\n';
tmp[tpk_curr + 1] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
}
return i;
}
for (i = 0; i < count; i++) {
tmp[tpk_curr] = buf[i];
if (tpk_curr < TPK_STR_SIZE) {
switch (buf[i]) {
case '\r':
/* replace cr with nl */
tmp[tpk_curr + 0] = '\n';
tmp[tpk_curr + 1] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
if (buf[i + 1] == '\n')
i++;
break;
case '\n':
tmp[tpk_curr + 1] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
break;
default:
tpk_curr++;
}
} else {
/* end of tmp buffer reached: cut the message in two */
tmp[tpk_curr + 1] = '\\';
tmp[tpk_curr + 2] = '\n';
tmp[tpk_curr + 3] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
}
}
return count;
}
/*
* TTY operations open function.
*/
static int tpk_open(struct tty_struct *tty, struct file *filp)
{
tty->driver_data = &tpk_port;
return tty_port_open(&tpk_port.port, tty, filp);
}
/*
* TTY operations close function.
*/
static void tpk_close(struct tty_struct *tty, struct file *filp)
{
struct ttyprintk_port *tpkp = tty->driver_data;
mutex_lock(&tpkp->port_write_mutex);
/* flush tpk_printk buffer */
tpk_printk(NULL, 0);
mutex_unlock(&tpkp->port_write_mutex);
tty_port_close(&tpkp->port, tty, filp);
}
/*
* TTY operations write function.
*/
static int tpk_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct ttyprintk_port *tpkp = tty->driver_data;
int ret;
/* exclusive use of tpk_printk within this tty */
mutex_lock(&tpkp->port_write_mutex);
ret = tpk_printk(buf, count);
mutex_unlock(&tpkp->port_write_mutex);
return ret;
}
/*
* TTY operations write_room function.
*/
static int tpk_write_room(struct tty_struct *tty)
{
return TPK_MAX_ROOM;
}
/*
* TTY operations ioctl function.
*/
static int tpk_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct ttyprintk_port *tpkp = tty->driver_data;
if (!tpkp)
return -EINVAL;
switch (cmd) {
/* Stop TIOCCONS */
case TIOCCONS:
return -EOPNOTSUPP;
default:
return -ENOIOCTLCMD;
}
return 0;
}
static const struct tty_operations ttyprintk_ops = {
.open = tpk_open,
.close = tpk_close,
.write = tpk_write,
.write_room = tpk_write_room,
.ioctl = tpk_ioctl,
};
struct tty_port_operations null_ops = { };
static struct tty_driver *ttyprintk_driver;
static int __init ttyprintk_init(void)
{
int ret = -ENOMEM;
void *rp;
ttyprintk_driver = alloc_tty_driver(1);
if (!ttyprintk_driver)
return ret;
ttyprintk_driver->owner = THIS_MODULE;
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
ttyprintk_driver->major = TTYAUX_MAJOR;
ttyprintk_driver->minor_start = 3;
ttyprintk_driver->num = 1;
ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
ttyprintk_driver->init_termios = tty_std_termios;
ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(ttyprintk_driver, &ttyprintk_ops);
ret = tty_register_driver(ttyprintk_driver);
if (ret < 0) {
printk(KERN_ERR "Couldn't register ttyprintk driver\n");
goto error;
}
/* create our unnumbered device */
rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL,
ttyprintk_driver->name);
if (IS_ERR(rp)) {
printk(KERN_ERR "Couldn't create ttyprintk device\n");
ret = PTR_ERR(rp);
goto error;
}
tty_port_init(&tpk_port.port);
tpk_port.port.ops = &null_ops;
mutex_init(&tpk_port.port_write_mutex);
return 0;
error:
put_tty_driver(ttyprintk_driver);
ttyprintk_driver = NULL;
return ret;
}
module_init(ttyprintk_init);

135
drivers/char/vc_screen.c
View File

@ -35,6 +35,12 @@
#include <linux/console.h>
#include <linux/device.h>
#include <linux/smp_lock.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/notifier.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@ -45,6 +51,86 @@
#undef addr
#define HEADER_SIZE 4
struct vcs_poll_data {
struct notifier_block notifier;
unsigned int cons_num;
bool seen_last_update;
wait_queue_head_t waitq;
struct fasync_struct *fasync;
};
static int
vcs_notifier(struct notifier_block *nb, unsigned long code, void *_param)
{
struct vt_notifier_param *param = _param;
struct vc_data *vc = param->vc;
struct vcs_poll_data *poll =
container_of(nb, struct vcs_poll_data, notifier);
int currcons = poll->cons_num;
if (code != VT_UPDATE)
return NOTIFY_DONE;
if (currcons == 0)
currcons = fg_console;
else
currcons--;
if (currcons != vc->vc_num)
return NOTIFY_DONE;
poll->seen_last_update = false;
wake_up_interruptible(&poll->waitq);
kill_fasync(&poll->fasync, SIGIO, POLL_IN);
return NOTIFY_OK;
}
static void
vcs_poll_data_free(struct vcs_poll_data *poll)
{
unregister_vt_notifier(&poll->notifier);
kfree(poll);
}
static struct vcs_poll_data *
vcs_poll_data_get(struct file *file)
{
struct vcs_poll_data *poll = file->private_data;
if (poll)
return poll;
poll = kzalloc(sizeof(*poll), GFP_KERNEL);
if (!poll)
return NULL;
poll->cons_num = iminor(file->f_path.dentry->d_inode) & 127;
init_waitqueue_head(&poll->waitq);
poll->notifier.notifier_call = vcs_notifier;
if (register_vt_notifier(&poll->notifier) != 0) {
kfree(poll);
return NULL;
}
/*
* This code may be called either through ->poll() or ->fasync().
* If we have two threads using the same file descriptor, they could
* both enter this function, both notice that the structure hasn't
* been allocated yet and go ahead allocating it in parallel, but
* only one of them must survive and be shared otherwise we'd leak
* memory with a dangling notifier callback.
*/
spin_lock(&file->f_lock);
if (!file->private_data) {
file->private_data = poll;
} else {
/* someone else raced ahead of us */
vcs_poll_data_free(poll);
poll = file->private_data;
}
spin_unlock(&file->f_lock);
return poll;
}
static int
vcs_size(struct inode *inode)
{
@ -102,6 +188,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
struct inode *inode = file->f_path.dentry->d_inode;
unsigned int currcons = iminor(inode);
struct vc_data *vc;
struct vcs_poll_data *poll;
long pos;
long viewed, attr, read;
int col, maxcol;
@ -134,6 +221,9 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
ret = -EINVAL;
if (pos < 0)
goto unlock_out;
poll = file->private_data;
if (count && poll)
poll->seen_last_update = true;
read = 0;
ret = 0;
while (count) {
@ -448,6 +538,8 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
}
*ppos += written;
ret = written;
if (written)
vcs_scr_updated(vc);
unlock_out:
release_console_sem();
@ -457,6 +549,37 @@ unlock_out:
return ret;
}
static unsigned int
vcs_poll(struct file *file, poll_table *wait)
{
struct vcs_poll_data *poll = vcs_poll_data_get(file);
int ret = 0;
if (poll) {
poll_wait(file, &poll->waitq, wait);
if (!poll->seen_last_update)
ret = POLLIN | POLLRDNORM;
}
return ret;
}
static int
vcs_fasync(int fd, struct file *file, int on)
{
struct vcs_poll_data *poll = file->private_data;
if (!poll) {
/* don't allocate anything if all we want is disable fasync */
if (!on)
return 0;
poll = vcs_poll_data_get(file);
if (!poll)
return -ENOMEM;
}
return fasync_helper(fd, file, on, &poll->fasync);
}
static int
vcs_open(struct inode *inode, struct file *filp)
{
@ -470,11 +593,23 @@ vcs_open(struct inode *inode, struct file *filp)
return ret;
}
static int vcs_release(struct inode *inode, struct file *file)
{
struct vcs_poll_data *poll = file->private_data;
if (poll)
vcs_poll_data_free(poll);
return 0;
}
static const struct file_operations vcs_fops = {
.llseek = vcs_lseek,
.read = vcs_read,
.write = vcs_write,
.poll = vcs_poll,
.fasync = vcs_fasync,
.open = vcs_open,
.release = vcs_release,
};
static struct class *vc_class;

5
drivers/char/vt.c
View File

@ -4182,6 +4182,11 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
}
}
void vcs_scr_updated(struct vc_data *vc)
{
notify_update(vc);
}
/*
* Visible symbols for modules
*/

1
drivers/input/serio/serport.c
View File

@ -165,6 +165,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
serio->open = serport_serio_open;
serio->close = serport_serio_close;
serio->port_data = serport;
serio->dev.parent = tty->dev;
serio_register_port(serport->serio);
printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name));

35
drivers/net/usb/hso.c
View File

@ -1645,11 +1645,11 @@ hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int hso_get_count(struct hso_serial *serial,
struct serial_icounter_struct __user *icnt)
static int hso_get_count(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct serial_icounter_struct icount;
struct uart_icount cnow;
struct hso_serial *serial = get_serial_by_tty(tty);
struct hso_tiocmget *tiocmget = serial->tiocmget;
memset(&icount, 0, sizeof(struct serial_icounter_struct));
@ -1660,19 +1660,19 @@ static int hso_get_count(struct hso_serial *serial,
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
spin_unlock_irq(&serial->serial_lock);
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
return 0;
}
@ -1764,10 +1764,6 @@ static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
case TIOCMIWAIT:
ret = hso_wait_modem_status(serial, arg);
break;
case TIOCGICOUNT:
ret = hso_get_count(serial, uarg);
break;
default:
ret = -ENOIOCTLCMD;
break;
@ -3300,6 +3296,7 @@ static const struct tty_operations hso_serial_ops = {
.chars_in_buffer = hso_serial_chars_in_buffer,
.tiocmget = hso_serial_tiocmget,
.tiocmset = hso_serial_tiocmset,
.get_icount = hso_get_count,
.unthrottle = hso_unthrottle
};

51
drivers/serial/68360serial.c
View File

@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration)
}
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int rs_360_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
struct async_icount cnow;
local_irq_disable();
cnow = info->state->icount;
local_irq_enable();
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
return 0;
}
static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
return -ENODEV;
if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
if (cmd != TIOCMIWAIT) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
return 0;
#endif
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
local_irq_disable();
cnow = info->state->icount;
local_irq_enable();
p_cuser = (struct serial_icounter_struct *) arg;
/* error = put_user(cnow.cts, &p_cuser->cts); */
/* if (error) return error; */
/* error = put_user(cnow.dsr, &p_cuser->dsr); */
/* if (error) return error; */
/* error = put_user(cnow.rng, &p_cuser->rng); */
/* if (error) return error; */
/* error = put_user(cnow.dcd, &p_cuser->dcd); */
/* if (error) return error; */
put_user(cnow.cts, &p_cuser->cts);
put_user(cnow.dsr, &p_cuser->dsr);
put_user(cnow.rng, &p_cuser->rng);
put_user(cnow.dcd, &p_cuser->dcd);
return 0;
default:
return -ENOIOCTLCMD;

69
drivers/serial/8250.c
View File

@ -31,6 +31,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/ratelimit.h>
#include <linux/tty_flip.h>
#include <linux/serial_reg.h>
#include <linux/serial_core.h>
@ -154,12 +155,6 @@ struct uart_8250_port {
unsigned char lsr_saved_flags;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
/*
* We provide a per-port pm hook.
*/
void (*pm)(struct uart_port *port,
unsigned int state, unsigned int old);
};
struct irq_info {
@ -1606,8 +1601,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
if (l == i->head && pass_counter++ > PASS_LIMIT) {
/* If we hit this, we're dead. */
printk(KERN_ERR "serial8250: too much work for "
"irq%d\n", irq);
printk_ratelimited(KERN_ERR
"serial8250: too much work for irq%d\n", irq);
break;
}
} while (l != end);
@ -1722,12 +1717,6 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up)
mutex_unlock(&hash_mutex);
}
/* Base timer interval for polling */
static inline int poll_timeout(int timeout)
{
return timeout > 6 ? (timeout / 2 - 2) : 1;
}
/*
* This function is used to handle ports that do not have an
* interrupt. This doesn't work very well for 16450's, but gives
@ -1742,7 +1731,7 @@ static void serial8250_timeout(unsigned long data)
iir = serial_in(up, UART_IIR);
if (!(iir & UART_IIR_NO_INT))
serial8250_handle_port(up);
mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
}
static void serial8250_backup_timeout(unsigned long data)
@ -1787,7 +1776,7 @@ static void serial8250_backup_timeout(unsigned long data)
/* Standard timer interval plus 0.2s to keep the port running */
mod_timer(&up->timer,
jiffies + poll_timeout(up->port.timeout) + HZ / 5);
jiffies + uart_poll_timeout(&up->port) + HZ / 5);
}
static unsigned int serial8250_tx_empty(struct uart_port *port)
@ -1867,15 +1856,17 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
unsigned int status, tmout = 10000;
/* Wait up to 10ms for the character(s) to be sent. */
do {
for (;;) {
status = serial_in(up, UART_LSR);
up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
if ((status & bits) == bits)
break;
if (--tmout == 0)
break;
udelay(1);
} while ((status & bits) != bits);
}
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
@ -2069,7 +2060,7 @@ static int serial8250_startup(struct uart_port *port)
up->timer.function = serial8250_backup_timeout;
up->timer.data = (unsigned long)up;
mod_timer(&up->timer, jiffies +
poll_timeout(up->port.timeout) + HZ / 5);
uart_poll_timeout(port) + HZ / 5);
}
/*
@ -2079,7 +2070,7 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!is_real_interrupt(up->port.irq)) {
up->timer.data = (unsigned long)up;
mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
} else {
retval = serial_link_irq_chain(up);
if (retval)
@ -2440,16 +2431,24 @@ serial8250_set_ldisc(struct uart_port *port, int new)
port->flags &= ~UPF_HARDPPS_CD;
}
static void
serial8250_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
struct uart_8250_port *p = (struct uart_8250_port *)port;
serial8250_set_sleep(p, state != 0);
}
EXPORT_SYMBOL(serial8250_do_pm);
if (p->pm)
p->pm(port, state, oldstate);
static void
serial8250_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
if (port->pm)
port->pm(port, state, oldstate);
else
serial8250_do_pm(port, state, oldstate);
}
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
@ -2674,6 +2673,16 @@ static struct uart_ops serial8250_pops = {
static struct uart_8250_port serial8250_ports[UART_NR];
static void (*serial8250_isa_config)(int port, struct uart_port *up,
unsigned short *capabilities);
void serial8250_set_isa_configurator(
void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
{
serial8250_isa_config = v;
}
EXPORT_SYMBOL(serial8250_set_isa_configurator);
static void __init serial8250_isa_init_ports(void)
{
struct uart_8250_port *up;
@ -2719,6 +2728,9 @@ static void __init serial8250_isa_init_ports(void)
up->port.regshift = old_serial_port[i].iomem_reg_shift;
set_io_from_upio(&up->port);
up->port.irqflags |= irqflag;
if (serial8250_isa_config != NULL)
serial8250_isa_config(i, &up->port, &up->capabilities);
}
}
@ -3010,6 +3022,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
port.set_termios = p->set_termios;
port.pm = p->pm;
port.dev = &dev->dev;
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
@ -3176,6 +3189,12 @@ int serial8250_register_port(struct uart_port *port)
/* Possibly override set_termios call */
if (port->set_termios)
uart->port.set_termios = port->set_termios;
if (port->pm)
uart->port.pm = port->pm;
if (serial8250_isa_config != NULL)
serial8250_isa_config(0, &uart->port,
&uart->capabilities);
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)

7
drivers/serial/Kconfig
View File

@ -718,13 +718,6 @@ config SERIAL_MRST_MAX3110
the Intel Moorestown platform. On other systems use the max3100
driver.
config MRST_MAX3110_IRQ
boolean "Enable GPIO IRQ for Max3110 over Moorestown"
default n
depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
help
This has to be enabled after Moorestown GPIO driver is loaded
config SERIAL_MFD_HSU
tristate "Medfield High Speed UART support"
depends on PCI

156
drivers/serial/altera_uart.c
View File

@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/console.h>
@ -27,6 +28,8 @@
#include <linux/altera_uart.h>
#define DRV_NAME "altera_uart"
#define SERIAL_ALTERA_MAJOR 204
#define SERIAL_ALTERA_MINOR 213
/*
* Altera UART register definitions according to the Nios UART datasheet:
@ -76,13 +79,28 @@
*/
struct altera_uart {
struct uart_port port;
struct timer_list tmr;
unsigned int sigs; /* Local copy of line sigs */
unsigned short imr; /* Local IMR mirror */
};
static u32 altera_uart_readl(struct uart_port *port, int reg)
{
struct altera_uart_platform_uart *platp = port->private_data;
return readl(port->membase + (reg << platp->bus_shift));
}
static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
{
struct altera_uart_platform_uart *platp = port->private_data;
writel(dat, port->membase + (reg << platp->bus_shift));
}
static unsigned int altera_uart_tx_empty(struct uart_port *port)
{
return (readl(port->membase + ALTERA_UART_STATUS_REG) &
return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
}
@ -91,8 +109,7 @@ static unsigned int altera_uart_get_mctrl(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
unsigned int sigs;
sigs =
(readl(port->membase + ALTERA_UART_STATUS_REG) &
sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
sigs |= (pp->sigs & TIOCM_RTS);
@ -108,7 +125,7 @@ static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
else
pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_start_tx(struct uart_port *port)
@ -116,7 +133,7 @@ static void altera_uart_start_tx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_stop_tx(struct uart_port *port)
@ -124,7 +141,7 @@ static void altera_uart_stop_tx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_stop_rx(struct uart_port *port)
@ -132,7 +149,7 @@ static void altera_uart_stop_rx(struct uart_port *port)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@ -145,7 +162,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state)
pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
else
pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
@ -168,7 +185,8 @@ static void altera_uart_set_termios(struct uart_port *port,
tty_termios_encode_baud_rate(termios, baud, baud);
spin_lock_irqsave(&port->lock, flags);
writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
uart_update_timeout(port, termios->c_cflag, baud);
altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
@ -178,14 +196,15 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
unsigned char ch, flag;
unsigned short status;
while ((status = readl(port->membase + ALTERA_UART_STATUS_REG)) &
while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
ALTERA_UART_STATUS_RRDY_MSK) {
ch = readl(port->membase + ALTERA_UART_RXDATA_REG);
ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
flag = TTY_NORMAL;
port->icount.rx++;
if (status & ALTERA_UART_STATUS_E_MSK) {
writel(status, port->membase + ALTERA_UART_STATUS_REG);
altera_uart_writel(port, status,
ALTERA_UART_STATUS_REG);
if (status & ALTERA_UART_STATUS_BRK_MSK) {
port->icount.brk++;
@ -225,18 +244,18 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
if (port->x_char) {
/* Send special char - probably flow control */
writel(port->x_char, port->membase + ALTERA_UART_TXDATA_REG);
altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
port->x_char = 0;
port->icount.tx++;
return;
}
while (readl(port->membase + ALTERA_UART_STATUS_REG) &
while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TRDY_MSK) {
if (xmit->head == xmit->tail)
break;
writel(xmit->buf[xmit->tail],
port->membase + ALTERA_UART_TXDATA_REG);
altera_uart_writel(port, xmit->buf[xmit->tail],
ALTERA_UART_TXDATA_REG);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
}
@ -246,7 +265,7 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
if (xmit->head == xmit->tail) {
pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
}
}
@ -256,7 +275,7 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
struct altera_uart *pp = container_of(port, struct altera_uart, port);
unsigned int isr;
isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
spin_lock(&port->lock);
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
@ -268,14 +287,23 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
return IRQ_RETVAL(isr);
}
static void altera_uart_timer(unsigned long data)
{
struct uart_port *port = (void *)data;
struct altera_uart *pp = container_of(port, struct altera_uart, port);
altera_uart_interrupt(0, port);
mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
}
static void altera_uart_config_port(struct uart_port *port, int flags)
{
port->type = PORT_ALTERA_UART;
/* Clear mask, so no surprise interrupts. */
writel(0, port->membase + ALTERA_UART_CONTROL_REG);
altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
/* Clear status register */
writel(0, port->membase + ALTERA_UART_STATUS_REG);
altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
}
static int altera_uart_startup(struct uart_port *port)
@ -284,6 +312,12 @@ static int altera_uart_startup(struct uart_port *port)
unsigned long flags;
int ret;
if (!port->irq) {
setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
return 0;
}
ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
DRV_NAME, port);
if (ret) {
@ -316,7 +350,10 @@ static void altera_uart_shutdown(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
free_irq(port->irq, port);
if (port->irq)
free_irq(port->irq, port);
else
del_timer_sync(&pp->tmr);
}
static const char *altera_uart_type(struct uart_port *port)
@ -384,8 +421,9 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
port->iotype = SERIAL_IO_MEM;
port->irq = platp[i].irq;
port->uartclk = platp[i].uartclk;
port->flags = ASYNC_BOOT_AUTOCONF;
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &altera_uart_ops;
port->private_data = platp;
}
return 0;
@ -393,7 +431,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
static void altera_uart_console_putc(struct uart_port *port, const char c)
{
while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_TRDY_MSK))
cpu_relax();
@ -423,7 +461,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
return -EINVAL;
port = &altera_uart_ports[co->index].port;
if (port->membase == 0)
if (!port->membase)
return -ENODEV;
if (options)
@ -435,7 +473,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
static struct uart_driver altera_uart_driver;
static struct console altera_uart_console = {
.name = "ttyS",
.name = "ttyAL",
.write = altera_uart_console_write,
.device = uart_console_device,
.setup = altera_uart_console_setup,
@ -466,9 +504,9 @@ console_initcall(altera_uart_console_init);
static struct uart_driver altera_uart_driver = {
.owner = THIS_MODULE,
.driver_name = DRV_NAME,
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.dev_name = "ttyAL",
.major = SERIAL_ALTERA_MAJOR,
.minor = SERIAL_ALTERA_MINOR,
.nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
.cons = ALTERA_UART_CONSOLE,
};
@ -477,38 +515,55 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
{
struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
int i;
struct resource *res_mem;
struct resource *res_irq;
int i = pdev->id;
for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
port = &altera_uart_ports[i].port;
/* -1 emphasizes that the platform must have one port, no .N suffix */
if (i == -1)
i = 0;
port->line = i;
port->type = PORT_ALTERA_UART;
port->mapbase = platp[i].mapbase;
port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
port->iotype = SERIAL_IO_MEM;
port->irq = platp[i].irq;
port->uartclk = platp[i].uartclk;
port->ops = &altera_uart_ops;
port->flags = ASYNC_BOOT_AUTOCONF;
if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
return -EINVAL;
uart_add_one_port(&altera_uart_driver, port);
}
port = &altera_uart_ports[i].port;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem)
port->mapbase = res_mem->start;
else if (platp->mapbase)
port->mapbase = platp->mapbase;
else
return -EINVAL;
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res_irq)
port->irq = res_irq->start;
else if (platp->irq)
port->irq = platp->irq;
port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
if (!port->membase)
return -ENOMEM;
port->line = i;
port->type = PORT_ALTERA_UART;
port->iotype = SERIAL_IO_MEM;
port->uartclk = platp->uartclk;
port->ops = &altera_uart_ops;
port->flags = UPF_BOOT_AUTOCONF;
port->private_data = platp;
uart_add_one_port(&altera_uart_driver, port);
return 0;
}
static int __devexit altera_uart_remove(struct platform_device *pdev)
{
struct uart_port *port;
int i;
for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) {
port = &altera_uart_ports[i].port;
if (port)
uart_remove_one_port(&altera_uart_driver, port);
}
struct uart_port *port = &altera_uart_ports[pdev->id].port;
uart_remove_one_port(&altera_uart_driver, port);
return 0;
}
@ -550,3 +605,4 @@ MODULE_DESCRIPTION("Altera UART driver");
MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);

7
drivers/serial/bfin_sport_uart.c
View File

@ -131,7 +131,12 @@ static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
tclkdiv = sclk / (2 * baud_rate) - 1;
rclkdiv = sclk / (2 * baud_rate * 2) - 1;
/* The actual uart baud rate of devices vary between +/-2%. The sport
* RX sample rate should be faster than the double of the worst case,
* otherwise, wrong data are received. So, set sport RX clock to be
* 3% faster.
*/
rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1;
SPORT_PUT_TCLKDIV(up, tclkdiv);
SPORT_PUT_RCLKDIV(up, rclkdiv);
SSYNC();

5
drivers/serial/imx.c
View File

@ -327,14 +327,13 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
while (!uart_circ_empty(xmit) &&
!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
sport->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

4
drivers/serial/jsm/jsm_driver.c
View File

@ -172,13 +172,15 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
jsm_uart_port_init here! */
dev_err(&pdev->dev, "memory allocation for flipbuf failed\n");
rc = -ENOMEM;
goto out_free_irq;
goto out_free_uart;
}
pci_set_drvdata(pdev, brd);
pci_save_state(pdev);
return 0;
out_free_uart:
jsm_remove_uart_port(brd);
out_free_irq:
jsm_remove_uart_port(brd);
free_irq(brd->irq, brd);

34
drivers/serial/max3107.c
View File

@ -986,12 +986,14 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
if (!s->rxbuf) {
pr_err("Allocating RX buffer failed\n");
return -ENOMEM;
retval = -ENOMEM;
goto err_free4;
}
s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
if (!s->rxstr) {
pr_err("Allocating RX buffer failed\n");
return -ENOMEM;
retval = -ENOMEM;
goto err_free3;
}
/* SPI Tx buffer
* SPI transfer buffer
@ -1002,7 +1004,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
if (!s->txbuf) {
pr_err("Allocating TX buffer failed\n");
return -ENOMEM;
retval = -ENOMEM;
goto err_free2;
}
/* Initialize shared data lock */
spin_lock_init(&s->data_lock);
@ -1021,13 +1024,15 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
buf[0] = MAX3107_REVID_REG;
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
return -EIO;
retval = -EIO;
goto err_free1;
}
if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
(buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
dev_err(&s->spi->dev, "REVID %x does not match\n",
(buf[0] & MAX3107_SPI_RX_DATA_MASK));
return -ENODEV;
retval = -ENODEV;
goto err_free1;
}
/* Disable all interrupts */
@ -1047,7 +1052,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
/* Perform SPI transfer */
if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
dev_err(&s->spi->dev, "SPI transfer for init failed\n");
return -EIO;
retval = -EIO;
goto err_free1;
}
/* Register UART driver */
@ -1055,7 +1061,7 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
retval = uart_register_driver(&max3107_uart_driver);
if (retval) {
dev_err(&s->spi->dev, "Registering UART driver failed\n");
return retval;
goto err_free1;
}
driver_registered = 1;
}
@ -1074,13 +1080,13 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
retval = uart_add_one_port(&max3107_uart_driver, &s->port);
if (retval < 0) {
dev_err(&s->spi->dev, "Adding UART port failed\n");
return retval;
goto err_free1;
}
if (pdata->configure) {
retval = pdata->configure(s);
if (retval < 0)
return retval;
goto err_free1;
}
/* Go to suspend mode */
@ -1088,6 +1094,16 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
pdata->hw_suspend(s, 1);
return 0;
err_free1:
kfree(s->txbuf);
err_free2:
kfree(s->rxstr);
err_free3:
kfree(s->rxbuf);
err_free4:
kfree(s);
return retval;
}
EXPORT_SYMBOL_GPL(max3107_probe);

47
drivers/serial/mfd.c
View File

@ -172,6 +172,9 @@ static ssize_t port_show_regs(struct file *file, char __user *user_buf,
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
if (len > HSU_REGS_BUFSIZE)
len = HSU_REGS_BUFSIZE;
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
@ -219,6 +222,9 @@ static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
if (len > HSU_REGS_BUFSIZE)
len = HSU_REGS_BUFSIZE;
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
@ -925,39 +931,52 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
cval |= UART_LCR_EPAR;
/*
* The base clk is 50Mhz, and the baud rate come from:
* baud = 50M * MUL / (DIV * PS * DLAB)
*
* For those basic low baud rate we can get the direct
* scalar from 2746800, like 115200 = 2746800/24, for those
* higher baud rate, we have to handle them case by case,
* but DIV reg is never touched as its default value 0x3d09
* scalar from 2746800, like 115200 = 2746800/24. For those
* higher baud rate, we handle them case by case, mainly by
* adjusting the MUL/PS registers, and DIV register is kept
* as default value 0x3d09 to make things simple
*/
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
quot = uart_get_divisor(port, baud);
quot = 1;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
quot = 1;
break;
case 3000000:
mul = 0x2EE0;
break;
case 2500000:
mul = 0x2710;
ps = 0x10;
quot = 1;
break;
case 18432000:
case 2000000:
mul = 0x1F40;
break;
case 1843200:
mul = 0x2400;
ps = 0x10;
quot = 1;
break;
case 1500000:
mul = 0x1D4C;
ps = 0xc;
quot = 1;
mul = 0x1770;
break;
case 1000000:
mul = 0xFA0;
break;
case 500000:
mul = 0x7D0;
break;
default:
;
/* Use uart_get_divisor to get quot for other baud rates */
quot = 0;
}
if (!quot)
quot = uart_get_divisor(port, baud);
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B;
else if ((up->port.uartclk / quot) < (230400 * 16))

358
drivers/serial/mrst_max3110.c
View File

@ -1,7 +1,7 @@
/*
* max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
* mrst_max3110.c - spi uart protocol driver for Maxim 3110
*
* Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
* Copyright (c) 2008-2010, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -32,18 +32,13 @@
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/kthread.h>
#include <linux/delay.h>
#include <asm/atomic.h>
#include <linux/spi/spi.h>
#include <linux/spi/dw_spi.h>
#include "mrst_max3110.h"
@ -56,7 +51,7 @@
struct uart_max3110 {
struct uart_port port;
struct spi_device *spi;
char *name;
char name[24];
wait_queue_head_t wq;
struct task_struct *main_thread;
@ -67,35 +62,30 @@ struct uart_max3110 {
u16 cur_conf;
u8 clock;
u8 parity, word_7bits;
u16 irq;
unsigned long uart_flags;
/* console related */
struct circ_buf con_xmit;
/* irq related */
u16 irq;
};
/* global data structure, may need be removed */
struct uart_max3110 *pmax;
static inline void receive_char(struct uart_max3110 *max, u8 ch);
static struct uart_max3110 *pmax;
static void receive_chars(struct uart_max3110 *max,
unsigned char *str, int len);
static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
static void max3110_console_receive(struct uart_max3110 *max);
static int max3110_read_multi(struct uart_max3110 *max, u8 *buf);
static void max3110_con_receive(struct uart_max3110 *max);
int max3110_write_then_read(struct uart_max3110 *max,
const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
static int max3110_write_then_read(struct uart_max3110 *max,
const void *txbuf, void *rxbuf, unsigned len, int always_fast)
{
struct spi_device *spi = max->spi;
struct spi_message message;
struct spi_transfer x;
int ret;
if (!txbuf || !rxbuf)
return -EINVAL;
spi_message_init(&message);
memset(&x, 0, sizeof x);
x.len = len;
@ -104,7 +94,7 @@ int max3110_write_then_read(struct uart_max3110 *max,
spi_message_add_tail(&x, &message);
if (always_fast)
x.speed_hz = 3125000;
x.speed_hz = spi->max_speed_hz;
else if (max->baud)
x.speed_hz = max->baud;
@ -113,58 +103,80 @@ int max3110_write_then_read(struct uart_max3110 *max,
return ret;
}
/* Write a u16 to the device, and return one u16 read back */
int max3110_out(struct uart_max3110 *max, const u16 out)
/* Write a 16b word to the device */
static int max3110_out(struct uart_max3110 *max, const u16 out)
{
u16 tmp;
void *buf;
u16 *obuf, *ibuf;
u8 ch;
int ret;
ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
if (ret)
return ret;
buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
if (!buf)
return -ENOMEM;
obuf = buf;
ibuf = buf + 4;
*obuf = out;
ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
if (ret) {
pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n",
__func__, ret, out);
goto exit;
}
/* If some valid data is read back */
if (tmp & MAX3110_READ_DATA_AVAILABLE)
receive_char(max, (tmp & 0xff));
if (*ibuf & MAX3110_READ_DATA_AVAILABLE) {
ch = *ibuf & 0xff;
receive_chars(max, &ch, 1);
}
exit:
kfree(buf);
return ret;
}
#define MAX_READ_LEN 20
/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
* need any delay like flushing character out. It returns how many
* valide bytes are read back
* need any delay like flushing character out.
*
* Return how many valide bytes are read back
*/
static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf)
{
u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
u8 *pbuf, valid_str[MAX_READ_LEN];
int i, j, bytelen;
void *buf;
u16 *obuf, *ibuf;
u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH];
int i, j, blen;
if (len > MAX_READ_LEN) {
pr_err(PR_FMT "read len %d is too large\n", len);
blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
if (!buf) {
pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__);
return 0;
}
bytelen = len * 2;
memset(out, 0, bytelen);
memset(in, 0, bytelen);
/* tx/rx always have the same length */
obuf = buf;
ibuf = buf + blen;
if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
kfree(buf);
return 0;
}
/* If caller don't provide a buffer, then handle received char */
pbuf = buf ? buf : valid_str;
/* If caller doesn't provide a buffer, then handle received char */
pbuf = rxbuf ? rxbuf : valid_str;
for (i = 0, j = 0; i < len; i++) {
if (in[i] & MAX3110_READ_DATA_AVAILABLE)
pbuf[j++] = (u8)(in[i] & 0xff);
for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
pbuf[j++] = ibuf[i] & 0xff;
}
if (j && (pbuf == valid_str))
receive_chars(max, valid_str, j);
kfree(buf);
return j;
}
@ -178,10 +190,6 @@ static void serial_m3110_con_putchar(struct uart_port *port, int ch)
xmit->buf[xmit->head] = (char)ch;
xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
}
if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
wake_up_process(max->main_thread);
}
/*
@ -197,6 +205,9 @@ static void serial_m3110_con_write(struct console *co,
return;
uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags))
wake_up_process(pmax->main_thread);
}
static int __init
@ -210,6 +221,9 @@ serial_m3110_con_setup(struct console *co, char *options)
pr_info(PR_FMT "setting up console\n");
if (co->index == -1)
co->index = 0;
if (!max) {
pr_err(PR_FMT "pmax is NULL, return");
return -ENODEV;
@ -240,8 +254,6 @@ static struct console serial_m3110_console = {
.data = &serial_m3110_reg,
};
#define MRST_CONSOLE (&serial_m3110_console)
static unsigned int serial_m3110_tx_empty(struct uart_port *port)
{
return 1;
@ -259,32 +271,44 @@ static void serial_m3110_stop_rx(struct uart_port *port)
}
#define WORDS_PER_XFER 128
static inline void send_circ_buf(struct uart_max3110 *max,
static void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
int len, left = 0;
u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
void *buf;
u16 *obuf, *ibuf;
u8 valid_str[WORDS_PER_XFER];
int i, j;
int i, j, len, blen, dma_size, left, ret = 0;
dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
if (!buf)
return;
obuf = buf;
ibuf = buf + dma_size/2;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
len = min(left, WORDS_PER_XFER);
blen = len * sizeof(u16);
memset(ibuf, 0, blen);
memset(obuf, 0, len * 2);
memset(ibuf, 0, len * 2);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
max3110_write_then_read(max, (u8 *)obuf,
(u8 *)ibuf, len * 2, 0);
/* Fail to send msg to console is not very critical */
ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
if (ret)
pr_warning(PR_FMT "%s(): get err msg %d\n",
__func__, ret);
for (i = 0, j = 0; i < len; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
valid_str[j++] = (u8)(ibuf[i] & 0xff);
valid_str[j++] = ibuf[i] & 0xff;
}
if (j)
@ -294,6 +318,8 @@ static inline void send_circ_buf(struct uart_max3110 *max,
left -= len;
}
}
kfree(buf);
}
static void transmit_char(struct uart_max3110 *max)
@ -313,8 +339,10 @@ static void transmit_char(struct uart_max3110 *max)
serial_m3110_stop_tx(port);
}
/* This will be called by uart_write() and tty_write, can't
* go to sleep */
/*
* This will be called by uart_write() and tty_write, can't
* go to sleep
*/
static void serial_m3110_start_tx(struct uart_port *port)
{
struct uart_max3110 *max =
@ -336,7 +364,7 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
tty = port->state->port.tty;
if (!tty)
return; /* receive some char before the tty is opened */
return;
while (len) {
usable = tty_buffer_request_room(tty, len);
@ -344,32 +372,37 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
tty_insert_flip_string(tty, str, usable);
str += usable;
port->icount.rx += usable;
tty_flip_buffer_push(tty);
}
len -= usable;
}
tty_flip_buffer_push(tty);
}
static inline void receive_char(struct uart_max3110 *max, u8 ch)
{
receive_chars(max, &ch, 1);
}
static void max3110_console_receive(struct uart_max3110 *max)
/*
* This routine will be used in read_thread or RX IRQ handling,
* it will first do one round buffer read(8 words), if there is some
* valid RX data, will try to read 5 more rounds till all data
* is read out.
*
* Use stack space as data buffer to save some system load, and chose
* 504 Btyes as a threadhold to do a bulk push to upper tty layer when
* receiving bulk data, a much bigger buffer may cause stack overflow
*/
static void max3110_con_receive(struct uart_max3110 *max)
{
int loop = 1, num, total = 0;
u8 recv_buf[512], *pbuf;
pbuf = recv_buf;
do {
num = max3110_read_multi(max, 8, pbuf);
num = max3110_read_multi(max, pbuf);
if (num) {
loop = 10;
loop = 5;
pbuf += num;
total += num;
if (total >= 500) {
if (total >= 504) {
receive_chars(max, recv_buf, total);
pbuf = recv_buf;
total = 0;
@ -397,7 +430,7 @@ static int max3110_main_thread(void *_max)
mutex_lock(&max->thread_mutex);
if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
max3110_console_receive(max);
max3110_con_receive(max);
/* first handle console output */
if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
@ -414,7 +447,6 @@ static int max3110_main_thread(void *_max)
return ret;
}
#ifdef CONFIG_MRST_MAX3110_IRQ
static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
{
struct uart_max3110 *max = dev_id;
@ -426,7 +458,7 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
#else
/* if don't use RX IRQ, then need a thread to polling read */
static int max3110_read_thread(void *_max)
{
@ -434,9 +466,14 @@ static int max3110_read_thread(void *_max)
pr_info(PR_FMT "start read thread\n");
do {
mutex_lock(&max->thread_mutex);
max3110_console_receive(max);
mutex_unlock(&max->thread_mutex);
/*
* If can't acquire the mutex, it means the main thread
* is running which will also perform the rx job
*/
if (mutex_trylock(&max->thread_mutex)) {
max3110_con_receive(max);
mutex_unlock(&max->thread_mutex);
}
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ / 20);
@ -444,7 +481,6 @@ static int max3110_read_thread(void *_max)
return 0;
}
#endif
static int serial_m3110_startup(struct uart_port *port)
{
@ -453,33 +489,54 @@ static int serial_m3110_startup(struct uart_port *port)
u16 config = 0;
int ret = 0;
if (port->line != 0)
if (port->line != 0) {
pr_err(PR_FMT "uart port startup failed\n");
return -1;
}
/* firstly disable all IRQ and config it to 115200, 8n1 */
/* Disable all IRQ and config it to 115200, 8n1 */
config = WC_TAG | WC_FIFO_ENABLE
| WC_1_STOPBITS
| WC_8BIT_WORD
| WC_BAUD_DR2;
ret = max3110_out(max, config);
/* as we use thread to handle tx/rx, need set low latency */
port->state->port.tty->low_latency = 1;
#ifdef CONFIG_MRST_MAX3110_IRQ
ret = request_irq(max->irq, serial_m3110_irq,
if (max->irq) {
max->read_thread = NULL;
ret = request_irq(max->irq, serial_m3110_irq,
IRQ_TYPE_EDGE_FALLING, "max3110", max);
if (ret)
return ret;
if (ret) {
max->irq = 0;
pr_err(PR_FMT "unable to allocate IRQ, polling\n");
} else {
/* Enable RX IRQ only */
config |= WC_RXA_IRQ_ENABLE;
}
}
/* enable RX IRQ only */
config |= WC_RXA_IRQ_ENABLE;
max3110_out(max, config);
#else
/* if IRQ is disabled, start a read thread for input data */
max->read_thread =
kthread_run(max3110_read_thread, max, "max3110_read");
#endif
if (max->irq == 0) {
/* If IRQ is disabled, start a read thread for input data */
max->read_thread =
kthread_run(max3110_read_thread, max, "max3110_read");
if (IS_ERR(max->read_thread)) {
ret = PTR_ERR(max->read_thread);
max->read_thread = NULL;
pr_err(PR_FMT "Can't create read thread!\n");
return ret;
}
}
ret = max3110_out(max, config);
if (ret) {
if (max->irq)
free_irq(max->irq, max);
if (max->read_thread)
kthread_stop(max->read_thread);
max->read_thread = NULL;
return ret;
}
max->cur_conf = config;
return 0;
@ -496,9 +553,8 @@ static void serial_m3110_shutdown(struct uart_port *port)
max->read_thread = NULL;
}
#ifdef CONFIG_MRST_MAX3110_IRQ
free_irq(max->irq, max);
#endif
if (max->irq)
free_irq(max->irq, max);
/* Disable interrupts from this port */
config = WC_TAG | WC_SW_SHDI;
@ -516,8 +572,7 @@ static int serial_m3110_request_port(struct uart_port *port)
static void serial_m3110_config_port(struct uart_port *port, int flags)
{
/* give it fake type */
port->type = PORT_PXA;
port->type = PORT_MAX3100;
}
static int
@ -552,6 +607,9 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
new_conf |= WC_7BIT_WORD;
break;
default:
/* We only support CS7 & CS8 */
termios->c_cflag &= ~CSIZE;
termios->c_cflag |= CS8;
case CS8:
cval = UART_LCR_WLEN8;
new_conf |= WC_8BIT_WORD;
@ -560,7 +618,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
/* first calc the div for 1.8MHZ clock case */
/* First calc the div for 1.8MHZ clock case */
switch (baud) {
case 300:
clk_div = WC_BAUD_DR384;
@ -596,7 +654,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
if (max->clock & MAX3110_HIGH_CLK)
break;
default:
/* pick the previous baud rate */
/* Pick the previous baud rate */
baud = max->baud;
clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
tty_termios_encode_baud_rate(termios, baud, baud);
@ -604,15 +662,21 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
if (max->clock & MAX3110_HIGH_CLK) {
clk_div += 1;
/* high clk version max3110 doesn't support B300 */
if (baud == 300)
/* High clk version max3110 doesn't support B300 */
if (baud == 300) {
baud = 600;
clk_div = WC_BAUD_DR384;
}
if (baud == 230400)
clk_div = WC_BAUD_DR1;
tty_termios_encode_baud_rate(termios, baud, baud);
}
new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
if (unlikely(termios->c_cflag & CMSPAR))
termios->c_cflag &= ~CMSPAR;
if (termios->c_cflag & CSTOPB)
new_conf |= WC_2_STOPBITS;
else
@ -632,13 +696,14 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
new_conf |= WC_TAG;
if (new_conf != max->cur_conf) {
max3110_out(max, new_conf);
max->cur_conf = new_conf;
max->baud = baud;
if (!max3110_out(max, new_conf)) {
max->cur_conf = new_conf;
max->baud = baud;
}
}
}
/* don't handle hw handshaking */
/* Don't handle hw handshaking */
static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
@ -672,7 +737,7 @@ struct uart_ops serial_m3110_ops = {
.break_ctl = serial_m3110_break_ctl,
.startup = serial_m3110_startup,
.shutdown = serial_m3110_shutdown,
.set_termios = serial_m3110_set_termios, /* must have */
.set_termios = serial_m3110_set_termios,
.pm = serial_m3110_pm,
.type = serial_m3110_type,
.release_port = serial_m3110_release_port,
@ -688,52 +753,60 @@ static struct uart_driver serial_m3110_reg = {
.major = TTY_MAJOR,
.minor = 64,
.nr = 1,
.cons = MRST_CONSOLE,
.cons = &serial_m3110_console,
};
#ifdef CONFIG_PM
static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
{
struct uart_max3110 *max = spi_get_drvdata(spi);
disable_irq(max->irq);
uart_suspend_port(&serial_m3110_reg, &max->port);
max3110_out(max, max->cur_conf | WC_SW_SHDI);
return 0;
}
static int serial_m3110_resume(struct spi_device *spi)
{
struct uart_max3110 *max = spi_get_drvdata(spi);
max3110_out(max, max->cur_conf);
uart_resume_port(&serial_m3110_reg, &max->port);
enable_irq(max->irq);
return 0;
}
#else
#define serial_m3110_suspend NULL
#define serial_m3110_resume NULL
#endif
static struct dw_spi_chip spi0_uart = {
.poll_mode = 1,
.enable_dma = 0,
.type = SPI_FRF_SPI,
};
static int serial_m3110_probe(struct spi_device *spi)
static int __devinit serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
int ret;
unsigned char *buffer;
void *buffer;
u16 res;
int ret = 0;
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
/* set spi info */
spi->mode = SPI_MODE_0;
/* Set spi info */
spi->bits_per_word = 16;
max->clock = MAX3110_HIGH_CLK;
spi->controller_data = &spi0_uart;
spi_setup(spi);
max->port.type = PORT_PXA; /* need apply for a max3110 type */
max->port.fifosize = 2; /* only have 16b buffer */
max->port.type = PORT_MAX3100;
max->port.fifosize = 2; /* Only have 16b buffer */
max->port.ops = &serial_m3110_ops;
max->port.line = 0;
max->port.dev = &spi->dev;
max->port.uartclk = 115200;
max->spi = spi;
max->name = spi->modalias; /* use spi name as the name */
strcpy(max->name, spi->modalias);
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
@ -755,13 +828,15 @@ static int serial_m3110_probe(struct spi_device *spi)
ret = -ENODEV;
goto err_get_page;
}
buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
buffer = (void *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err_get_page;
}
max->con_xmit.buf = (unsigned char *)buffer;
max->con_xmit.head = max->con_xmit.tail = 0;
max->con_xmit.buf = buffer;
max->con_xmit.head = 0;
max->con_xmit.tail = 0;
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
@ -770,8 +845,10 @@ static int serial_m3110_probe(struct spi_device *spi)
goto err_kthread;
}
spi_set_drvdata(spi, max);
pmax = max;
/* give membase a psudo value to pass serial_core's check */
/* Give membase a psudo value to pass serial_core's check */
max->port.membase = (void *)0xff110000;
uart_add_one_port(&serial_m3110_reg, &max->port);
@ -780,19 +857,17 @@ static int serial_m3110_probe(struct spi_device *spi)
err_kthread:
free_page((unsigned long)buffer);
err_get_page:
pmax = NULL;
kfree(max);
return ret;
}
static int max3110_remove(struct spi_device *dev)
static int __devexit serial_m3110_remove(struct spi_device *dev)
{
struct uart_max3110 *max = pmax;
struct uart_max3110 *max = spi_get_drvdata(dev);
if (!pmax)
if (!max)
return 0;
pmax = NULL;
uart_remove_one_port(&serial_m3110_reg, &max->port);
free_page((unsigned long)max->con_xmit.buf);
@ -811,13 +886,12 @@ static struct spi_driver uart_max3110_driver = {
.owner = THIS_MODULE,
},
.probe = serial_m3110_probe,
.remove = __devexit_p(max3110_remove),
.remove = __devexit_p(serial_m3110_remove),
.suspend = serial_m3110_suspend,
.resume = serial_m3110_resume,
};
int __init serial_m3110_init(void)
static int __init serial_m3110_init(void)
{
int ret = 0;
@ -832,7 +906,7 @@ int __init serial_m3110_init(void)
return ret;
}
void __exit serial_m3110_exit(void)
static void __exit serial_m3110_exit(void)
{
spi_unregister_driver(&uart_max3110_driver);
uart_unregister_driver(&serial_m3110_reg);
@ -841,5 +915,5 @@ void __exit serial_m3110_exit(void)
module_init(serial_m3110_init);
module_exit(serial_m3110_exit);
MODULE_LICENSE("GPL");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("max3110-uart");

1
drivers/serial/mrst_max3110.h
View File

@ -56,4 +56,5 @@
#define WC_BAUD_DR192 (0xE)
#define WC_BAUD_DR384 (0xF)
#define M3110_RX_FIFO_DEPTH 8
#endif

49
drivers/serial/serial_core.c
View File

@ -1074,10 +1074,10 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int uart_get_count(struct uart_state *state,
struct serial_icounter_struct __user *icnt)
static int uart_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct serial_icounter_struct icount;
struct uart_state *state = tty->driver_data;
struct uart_icount cnow;
struct uart_port *uport = state->uart_port;
@ -1085,19 +1085,19 @@ static int uart_get_count(struct uart_state *state,
memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
spin_unlock_irq(&uport->lock);
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
return 0;
}
/*
@ -1150,10 +1150,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
case TIOCMIWAIT:
ret = uart_wait_modem_status(state, arg);
break;
case TIOCGICOUNT:
ret = uart_get_count(state, uarg);
break;
}
if (ret != -ENOIOCTLCMD)
@ -2065,7 +2061,19 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
/*
* Re-enable the console device after suspending.
*/
if (uart_console(uport)) {
if (console_suspend_enabled && uart_console(uport)) {
/*
* First try to use the console cflag setting.
*/
memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = uport->cons->cflag;
/*
* If that's unset, use the tty termios setting.
*/
if (port->tty && port->tty->termios && termios.c_cflag == 0)
termios = *(port->tty->termios);
uart_change_pm(state, 0);
uport->ops->set_termios(uport, &termios, NULL);
console_start(uport->cons);
@ -2283,6 +2291,7 @@ static const struct tty_operations uart_ops = {
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
.get_icount = uart_get_icount,
#ifdef CONFIG_CONSOLE_POLL
.poll_init = uart_poll_init,
.poll_get_char = uart_poll_get_char,

26
drivers/serial/uartlite.c
View File

@ -322,6 +322,26 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
return -EINVAL;
}
#ifdef CONFIG_CONSOLE_POLL
static int ulite_get_poll_char(struct uart_port *port)
{
if (!(ioread32be(port->membase + ULITE_STATUS)
& ULITE_STATUS_RXVALID))
return NO_POLL_CHAR;
return ioread32be(port->membase + ULITE_RX);
}
static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
{
while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL)
cpu_relax();
/* write char to device */
iowrite32be(ch, port->membase + ULITE_TX);
}
#endif
static struct uart_ops ulite_ops = {
.tx_empty = ulite_tx_empty,
.set_mctrl = ulite_set_mctrl,
@ -338,7 +358,11 @@ static struct uart_ops ulite_ops = {
.release_port = ulite_release_port,
.request_port = ulite_request_port,
.config_port = ulite_config_port,
.verify_port = ulite_verify_port
.verify_port = ulite_verify_port,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = ulite_get_poll_char,
.poll_put_char = ulite_put_poll_char,
#endif
};
/* ---------------------------------------------------------------------

40
drivers/usb/serial/ark3116.c
View File

@ -411,6 +411,26 @@ err_out:
return result;
}
static int ark3116_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct ark3116_private *priv = usb_get_serial_port_data(port);
struct async_icount cnow = priv->icount;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
@ -460,25 +480,6 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
break;
case TIOCGICOUNT: {
struct serial_icounter_struct icount;
struct async_icount cnow = priv->icount;
memset(&icount, 0, sizeof(icount));
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
if (copy_to_user(user_arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
}
}
return -ENOIOCTLCMD;
@ -736,6 +737,7 @@ static struct usb_serial_driver ark3116_device = {
.ioctl = ark3116_ioctl,
.tiocmget = ark3116_tiocmget,
.tiocmset = ark3116_tiocmset,
.get_icount = ark3116_get_icount,
.open = ark3116_open,
.close = ark3116_close,
.break_ctl = ark3116_break_ctl,

1
drivers/usb/serial/ftdi_sio.c
View File

@ -2168,6 +2168,7 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was.
* (except that the driver doesn't support it !)
*
* This code is borrowed from linux/drivers/char/serial.c
*/

49
drivers/usb/serial/io_edgeport.c
View File

@ -222,6 +222,8 @@ static void edge_break(struct tty_struct *tty, int break_state);
static int edge_tiocmget(struct tty_struct *tty, struct file *file);
static int edge_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int edge_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
static int edge_startup(struct usb_serial *serial);
static void edge_disconnect(struct usb_serial *serial);
static void edge_release(struct usb_serial *serial);
@ -1624,6 +1626,31 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
static int edge_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct async_icount cnow;
cnow = edge_port->icount;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
__func__, port->number, icount->rx, icount->tx);
return 0;
}
static int get_serial_info(struct edgeport_port *edge_port,
struct serial_struct __user *retinfo)
{
@ -1650,7 +1677,6 @@ static int get_serial_info(struct edgeport_port *edge_port,
}
/*****************************************************************************
* SerialIoctl
* this function handles any ioctl calls to the driver
@ -1663,7 +1689,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct async_icount cnow;
struct async_icount cprev;
struct serial_icounter_struct icount;
dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
@ -1702,26 +1727,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
/* NOTREACHED */
break;
case TIOCGICOUNT:
cnow = edge_port->icount;
memset(&icount, 0, sizeof(icount));
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
__func__, port->number, icount.rx, icount.tx);
if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
}
return -ENOIOCTLCMD;
}

4
drivers/usb/serial/io_tables.h
View File

@ -123,6 +123,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
.get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
@ -152,6 +153,7 @@ static struct usb_serial_driver edgeport_4port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
.get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
@ -181,6 +183,7 @@ static struct usb_serial_driver edgeport_8port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
.get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
@ -209,6 +212,7 @@ static struct usb_serial_driver epic_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
.get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,

29
drivers/usb/serial/io_ti.c
View File

@ -2510,6 +2510,27 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
static int edge_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct async_icount *ic = &edge_port->icount;
icount->cts = ic->cts;
icount->dsr = ic->dsr;
icount->rng = ic->rng;
icount->dcd = ic->dcd;
icount->tx = ic->tx;
icount->rx = ic->rx;
icount->frame = ic->frame;
icount->parity = ic->parity;
icount->overrun = ic->overrun;
icount->brk = ic->brk;
icount->buf_overrun = ic->buf_overrun;
return 0;
}
static int get_serial_info(struct edgeport_port *edge_port,
struct serial_struct __user *retinfo)
{
@ -2572,13 +2593,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
}
/* not reached */
break;
case TIOCGICOUNT:
dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, edge_port->icount.rx, edge_port->icount.tx);
if (copy_to_user((void __user *)arg, &edge_port->icount,
sizeof(edge_port->icount)))
return -EFAULT;
return 0;
}
return -ENOIOCTLCMD;
}
@ -2758,6 +2772,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
.get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,

54
drivers/usb/serial/mos7720.c
View File

@ -1896,10 +1896,37 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
static int mos7720_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7720_port;
struct async_icount cnow;
mos7720_port = usb_get_serial_port_data(port);
cnow = mos7720_port->icount;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, icount->rx, icount->tx);
return 0;
}
static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
unsigned int __user *value)
{
unsigned int mcr ;
unsigned int mcr;
unsigned int arg;
struct usb_serial_port *port;
@ -1973,7 +2000,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
struct moschip_port *mos7720_port;
struct async_icount cnow;
struct async_icount cprev;
struct serial_icounter_struct icount;
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL)
@ -2021,29 +2047,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
}
/* NOTREACHED */
break;
case TIOCGICOUNT:
cnow = mos7720_port->icount;
memset(&icount, 0, sizeof(struct serial_icounter_struct));
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, icount.rx, icount.tx);
if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
}
return -ENOIOCTLCMD;
@ -2212,6 +2215,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.ioctl = mos7720_ioctl,
.tiocmget = mos7720_tiocmget,
.tiocmset = mos7720_tiocmset,
.get_icount = mos7720_get_icount,
.set_termios = mos7720_set_termios,
.write = mos7720_write,
.write_room = mos7720_write_room,

53
drivers/usb/serial/mos7840.c
View File

@ -2209,6 +2209,34 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
return 0;
}
static int mos7840_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct moschip_port *mos7840_port;
struct async_icount cnow;
mos7840_port = mos7840_get_port_private(port);
cnow = mos7840_port->icount;
smp_rmb();
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, icount->rx, icount->tx);
return 0;
}
/*****************************************************************************
* SerialIoctl
* this function handles any ioctl calls to the driver
@ -2223,7 +2251,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
struct async_icount cnow;
struct async_icount cprev;
struct serial_icounter_struct icount;
if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port");
@ -2282,29 +2309,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
/* NOTREACHED */
break;
case TIOCGICOUNT:
cnow = mos7840_port->icount;
smp_rmb();
memset(&icount, 0, sizeof(struct serial_icounter_struct));
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, icount.rx, icount.tx);
if (copy_to_user(argp, &icount, sizeof(icount)))
return -EFAULT;
return 0;
default:
break;
}
@ -2674,6 +2678,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
.break_ctl = mos7840_break,
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
.get_icount = mos7840_get_icount,
.attach = mos7840_startup,
.disconnect = mos7840_disconnect,
.release = mos7840_release,

48
drivers/usb/serial/ssu100.c
View File

@ -416,12 +416,34 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
return 0;
}
static int ssu100_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct ssu100_port_private *priv = usb_get_serial_port_data(port);
struct async_icount cnow = priv->icount;
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
struct ssu100_port_private *priv = usb_get_serial_port_data(port);
void __user *user_arg = (void __user *)arg;
dbg("%s cmd 0x%04x", __func__, cmd);
@ -433,27 +455,6 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
case TIOCMIWAIT:
return wait_modem_info(port, arg);
case TIOCGICOUNT:
{
struct serial_icounter_struct icount;
struct async_icount cnow = priv->icount;
memset(&icount, 0, sizeof(icount));
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
if (copy_to_user(user_arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
}
default:
break;
}
@ -726,6 +727,7 @@ static struct usb_serial_driver ssu100_device = {
.process_read_urb = ssu100_process_read_urb,
.tiocmget = ssu100_tiocmget,
.tiocmset = ssu100_tiocmset,
.get_icount = ssu100_get_icount,
.ioctl = ssu100_ioctl,
.set_termios = ssu100_set_termios,
.disconnect = usb_serial_generic_disconnect,

37
drivers/usb/serial/ti_usb_3410_5052.c
View File

@ -108,6 +108,8 @@ static void ti_throttle(struct tty_struct *tty);
static void ti_unthrottle(struct tty_struct *tty);
static int ti_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
static int ti_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
static void ti_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
static int ti_tiocmget(struct tty_struct *tty, struct file *file);
@ -237,6 +239,7 @@ static struct usb_serial_driver ti_1port_device = {
.set_termios = ti_set_termios,
.tiocmget = ti_tiocmget,
.tiocmset = ti_tiocmset,
.get_icount = ti_get_icount,
.break_ctl = ti_break,
.read_int_callback = ti_interrupt_callback,
.read_bulk_callback = ti_bulk_in_callback,
@ -265,6 +268,7 @@ static struct usb_serial_driver ti_2port_device = {
.set_termios = ti_set_termios,
.tiocmget = ti_tiocmget,
.tiocmset = ti_tiocmset,
.get_icount = ti_get_icount,
.break_ctl = ti_break,
.read_int_callback = ti_interrupt_callback,
.read_bulk_callback = ti_bulk_in_callback,
@ -788,6 +792,31 @@ static void ti_unthrottle(struct tty_struct *tty)
}
}
static int ti_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
struct async_icount cnow = tport->tp_icount;
dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
__func__, port->number,
cnow.rx, cnow.tx);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
static int ti_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
@ -830,14 +859,6 @@ static int ti_ioctl(struct tty_struct *tty, struct file *file,
cprev = cnow;
}
break;
case TIOCGICOUNT:
dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
__func__, port->number,
tport->tp_icount.rx, tport->tp_icount.tx);
if (copy_to_user((void __user *)arg, &tport->tp_icount,
sizeof(tport->tp_icount)))
return -EFAULT;
return 0;
}
return -ENOIOCTLCMD;
}

13
drivers/usb/serial/usb-serial.c
View File

@ -519,6 +519,18 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
return -EINVAL;
}
static int serial_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
if (port->serial->type->get_icount)
return port->serial->type->get_icount(tty, icount);
return -EINVAL;
}
/*
* We would be calling tty_wakeup here, but unfortunately some line
* disciplines have an annoying habit of calling tty->write from
@ -1195,6 +1207,7 @@ static const struct tty_operations serial_ops = {
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
.get_icount = serial_get_icount,
.cleanup = serial_cleanup,
.install = serial_install,
.proc_fops = &serial_proc_fops,

158
fs/proc/proc_tty.c
View File

@ -12,7 +12,10 @@
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/console.h>
#include <linux/seq_file.h>
#include <linux/fdtable.h>
#include <linux/bitops.h>
/*
@ -136,6 +139,160 @@ static const struct file_operations proc_tty_drivers_operations = {
.release = seq_release,
};
/*
* The device ID of file descriptor 0 of the current reading
* task if a character device...
*/
static dev_t current_dev;
/*
* This is the handler for /proc/tty/consoles
*/
static int show_console_dev(struct seq_file *m, void *v)
{
const struct tty_driver *driver;
struct console *con;
int index, len;
char flags[10];
dev_t dev;
if (v == SEQ_START_TOKEN)
return 0;
con = (struct console *)v;
if (!con)
return 0;
driver = con->device(con, &index);
if (!driver)
return 0;
dev = MKDEV(driver->major, driver->minor_start) + index;
index = 0;
if (con->flags & CON_ENABLED)
flags[index++] = 'E';
if (con->flags & CON_CONSDEV)
flags[index++] = 'C';
if (con->flags & CON_BOOT)
flags[index++] = 'B';
if (con->flags & CON_PRINTBUFFER)
flags[index++] = 'p';
if (con->flags & CON_BRL)
flags[index++] = 'b';
if (con->flags & CON_ANYTIME)
flags[index++] = 'a';
if (current_dev == dev)
flags[index++] = '*';
flags[index] = 0;
seq_printf(m, "%s%d%n", con->name, con->index, &len);
len = 21 - len;
if (len < 1)
len = 1;
seq_printf(m, "%*c", len, ' ');
seq_printf(m, "%c%c%c (%s)%n", con->read ? 'R' : '-',
con->write ? 'W' : '-', con->unblank ? 'U' : '-',
flags, &len);
len = 13 - len;
if (len < 1)
len = 1;
seq_printf(m, "%*c%4d:%d\n", len, ' ', MAJOR(dev), MINOR(dev));
return 0;
}
/* iterator for consoles */
static void *c_start(struct seq_file *m, loff_t *pos)
{
struct console *con;
loff_t off = 0;
if (*pos == 0)
return SEQ_START_TOKEN;
acquire_console_sem();
for (con = console_drivers; con; con = con->next) {
if (!con->device)
continue;
if (++off == *pos)
break;
}
release_console_sem();
return con;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
struct console *con;
acquire_console_sem();
if (v == SEQ_START_TOKEN)
con = console_drivers;
else
con = ((struct console *)v)->next;
for (; con; con = con->next) {
if (!con->device)
continue;
++*pos;
break;
}
release_console_sem();
return con;
}
static void c_stop(struct seq_file *m, void *v)
{
}
static const struct seq_operations tty_consoles_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_console_dev
};
/*
* Used for open /proc/tty/consoles. Before this detect
* the device ID of file descriptor 0 of the current
* reading task if a character device...
*/
static int tty_consoles_open(struct inode *inode, struct file *file)
{
struct files_struct *curfiles;
current_dev = 0;
curfiles = get_files_struct(current);
if (curfiles) {
const struct file *curfp;
spin_lock(&curfiles->file_lock);
curfp = fcheck_files(curfiles, 0);
if (curfp && curfp->private_data) {
const struct inode *inode;
dget(curfp->f_dentry);
inode = curfp->f_dentry->d_inode;
if (S_ISCHR(inode->i_mode)) {
struct tty_struct *tty;
tty = (struct tty_struct *)curfp->private_data;
if (tty && tty->magic == TTY_MAGIC) {
tty = tty_pair_get_tty(tty);
current_dev = tty_devnum(tty);
}
}
dput(curfp->f_dentry);
}
spin_unlock(&curfiles->file_lock);
put_files_struct(curfiles);
}
return seq_open(file, &tty_consoles_op);
}
static const struct file_operations proc_tty_consoles_operations = {
.open = tty_consoles_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
/*
* This function is called by tty_register_driver() to handle
* registering the driver's /proc handler into /proc/tty/driver/<foo>
@ -186,4 +343,5 @@ void __init proc_tty_init(void)
proc_tty_driver = proc_mkdir_mode("tty/driver", S_IRUSR|S_IXUSR, NULL);
proc_create("tty/ldiscs", 0, NULL, &tty_ldiscs_proc_fops);
proc_create("tty/drivers", 0, NULL, &proc_tty_drivers_operations);
proc_create("tty/consoles", 0, NULL, &proc_tty_consoles_operations);
}

2
include/asm-generic/ioctls.h
View File

@ -62,7 +62,9 @@
#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGRS485 0x542E
#ifndef TIOCSRS485
#define TIOCSRS485 0x542F
#endif
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define TCGETX 0x5432 /* SYS5 TCGETX compatibility */

5
include/linux/altera_uart.h
View File

@ -5,10 +5,15 @@
#ifndef __ALTUART_H
#define __ALTUART_H
#include <linux/init.h>
struct altera_uart_platform_uart {
unsigned long mapbase; /* Physical address base */
unsigned int irq; /* Interrupt vector */
unsigned int uartclk; /* UART clock rate */
unsigned int bus_shift; /* Bus shift (address stride) */
};
int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp);
#endif /* __ALTUART_H */

1
include/linux/selection.h
View File

@ -39,5 +39,6 @@ extern void putconsxy(struct vc_data *vc, unsigned char *p);
extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
extern void vcs_scr_updated(struct vc_data *vc);
#endif

8
include/linux/serial_8250.h
View File

@ -35,6 +35,8 @@ struct plat_serial8250_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
void (*pm)(struct uart_port *, unsigned int state,
unsigned old);
};
/*
@ -76,5 +78,11 @@ extern int serial8250_find_port_for_earlycon(void);
extern int setup_early_serial8250_console(char *cmdline);
extern void serial8250_do_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old);
extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
extern void serial8250_set_isa_configurator(void (*v)
(int port, struct uart_port *up,
unsigned short *capabilities));
#endif

10
include/linux/serial_core.h
View File

@ -289,6 +289,8 @@ struct uart_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
@ -411,6 +413,14 @@ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios
unsigned int max);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
/* Base timer interval for polling */
static inline int uart_poll_timeout(struct uart_port *port)
{
int timeout = port->timeout;
return timeout > 6 ? (timeout / 2 - 2) : 1;
}
/*
* Console helpers.
*/

3
include/linux/tty.h
View File

@ -256,6 +256,7 @@ struct tty_operations;
struct tty_struct {
int magic;
struct kref kref;
struct device *dev;
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
@ -465,7 +466,7 @@ extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
extern void tty_default_fops(struct file_operations *fops);
extern struct tty_struct *alloc_tty_struct(void);
extern void tty_add_file(struct tty_struct *tty, struct file *file);
extern int tty_add_file(struct tty_struct *tty, struct file *file);
extern void free_tty_struct(struct tty_struct *tty);
extern void initialize_tty_struct(struct tty_struct *tty,
struct tty_driver *driver, int idx);

9
include/linux/tty_driver.h
View File

@ -224,6 +224,12 @@
* unless the tty also has a valid tty->termiox pointer.
*
* Optional: Called under the termios lock
*
* int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
*
* Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
* structure to complete. This method is optional and will only be called
* if provided (otherwise EINVAL will be returned).
*/
#include <linux/fs.h>
@ -232,6 +238,7 @@
struct tty_struct;
struct tty_driver;
struct serial_icounter_struct;
struct tty_operations {
struct tty_struct * (*lookup)(struct tty_driver *driver,
@ -268,6 +275,8 @@ struct tty_operations {
unsigned int set, unsigned int clear);
int (*resize)(struct tty_struct *tty, struct winsize *ws);
int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
int (*get_icount)(struct tty_struct *tty,
struct serial_icounter_struct *icount);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct tty_driver *driver, int line, char *options);
int (*poll_get_char)(struct tty_driver *driver, int line);

2
include/linux/usb/serial.h
View File

@ -271,6 +271,8 @@ struct usb_serial_driver {
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
int (*get_icount)(struct tty_struct *tty,
struct serial_icounter_struct *icount);
/* Called by the tty layer for port level work. There may or may not
be an attached tty at this point */
void (*dtr_rts)(struct usb_serial_port *port, int on);

4
net/bluetooth/rfcomm/tty.c
View File

@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned
BT_DBG("TIOCMIWAIT");
break;
case TIOCGICOUNT:
BT_DBG("TIOCGICOUNT");
break;
case TIOCGSERIAL:
BT_ERR("TIOCGSERIAL is not supported");
return -ENOIOCTLCMD;