diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
new file mode 100644
index 000000000000..676ec42e1438
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7192.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7192 ADC device driver
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7192 ADC device. Datasheet can be
+  found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7192.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7190
+      - adi,ad7192
+      - adi,ad7193
+      - adi,ad7195
+
+  reg:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  dvdd-supply:
+    description: DVdd voltage supply
+    items:
+      - const: dvdd
+
+  avdd-supply:
+    description: AVdd voltage supply
+    items:
+      - const: avdd
+
+  adi,rejection-60-Hz-enable:
+    description: |
+      This bit enables a notch at 60 Hz when the first notch of the sinc
+      filter is at 50 Hz. When REJ60 is set, a filter notch is placed at
+      60 Hz when the sinc filter first notch is at 50 Hz. This allows
+      simultaneous 50 Hz/ 60 Hz rejection.
+    type: boolean
+
+  adi,refin2-pins-enable:
+    description: |
+      External reference applied between the P1/REFIN2(+) and P0/REFIN2(−) pins.
+    type: boolean
+
+  adi,buffer-enable:
+    description: |
+      Enables the buffer on the analog inputs. If cleared, the analog inputs
+      are unbuffered, lowering the power consumption of the device. If this
+      bit is set, the analog inputs are buffered, allowing the user to place
+      source impedances on the front end without contributing gain errors to
+      the system.
+    type: boolean
+
+  adi,burnout-currents-enable:
+    description: |
+      When this bit is set to 1, the 500 nA current sources in the signal
+      path are enabled. When BURN = 0, the burnout currents are disabled.
+      The burnout currents can be enabled only when the buffer is active
+      and when chop is disabled.
+    type: boolean
+
+  bipolar:
+    description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dvdd-supply
+  - avdd-supply
+  - spi-cpol
+  - spi-cpha
+
+examples:
+  - |
+    spi0 {
+      adc@0 {
+        compatible = "adi,ad7192";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+        spi-cpha;
+        clocks = <&ad7192_mclk>;
+        clock-names = "mclk";
+        #interrupt-cells = <2>;
+        interrupts = <25 0x2>;
+        interrupt-parent = <&gpio>;
+        dvdd-supply = <&dvdd>;
+        avdd-supply = <&avdd>;
+
+        adi,refin2-pins-enable;
+        adi,rejection-60-Hz-enable;
+        adi,buffer-enable;
+        adi,burnout-currents-enable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
deleted file mode 100644
index d8652460198e..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Analog Devices AD7606 Simultaneous Sampling ADC
-
-Required properties for the AD7606:
-
-- compatible: Must be one of
-	* "adi,ad7605-4"
-	* "adi,ad7606-8"
-	* "adi,ad7606-6"
-	* "adi,ad7606-4"
-	* "adi,ad7616"
-- reg: SPI chip select number for the device
-- spi-max-frequency: Max SPI frequency to use
-	see: Documentation/devicetree/bindings/spi/spi-bus.txt
-- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt
-- avcc-supply: phandle to the Avcc power supply
-- interrupts: IRQ line for the ADC
-	see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- adi,conversion-start-gpios: must be the device tree identifier of the CONVST pin.
-		  This logic input is used to initiate conversions on the analog
-		  input channels. As the line is active high, it should be marked
-		  GPIO_ACTIVE_HIGH.
-
-Optional properties:
-
-- reset-gpios: must be the device tree identifier of the RESET pin. If specified,
-	       it will be asserted during driver probe. As the line is active high,
-	       it should be marked GPIO_ACTIVE_HIGH.
-- standby-gpios: must be the device tree identifier of the STBY pin. This pin is used
-		to place the AD7606 into one of two power-down modes, Standby mode or
-		Shutdown mode. As the line is active low, it should be marked
-		GPIO_ACTIVE_LOW.
-- adi,first-data-gpios: must be the device tree identifier of the FRSTDATA pin.
-		    The FRSTDATA output indicates when the first channel, V1, is
-		    being read back on either the parallel, byte or serial interface.
-		    As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
-- adi,range-gpios: must be the device tree identifier of the RANGE pin. The polarity on
-	      this pin determines the input range of the analog input channels. If
-	      this pin is tied to a logic high, the analog input range is ±10V for
-	      all channels. If this pin is tied to a logic low, the analog input range
-	      is ±5V for all channels. As the line is active high, it should be marked
-	      GPIO_ACTIVE_HIGH.
-- adi,oversampling-ratio-gpios: must be the device tree identifier of the over-sampling
-				mode pins. As the line is active high, it should be marked
-				GPIO_ACTIVE_HIGH.
-
-Example:
-
-	adc@0 {
-		compatible = "adi,ad7606-8";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-
-		avcc-supply = <&adc_vref>;
-
-		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-parent = <&gpio>;
-
-		adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
-		adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-		adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
-						&gpio 23 GPIO_ACTIVE_HIGH
-						&gpio 26 GPIO_ACTIVE_HIGH>;
-		standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
new file mode 100644
index 000000000000..cc544fdc38be
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7606 Simultaneous Sampling ADC
+
+maintainers:
+  - Beniamin Bia <beniamin.bia@analog.com>
+  - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+  Analog Devices AD7606 Simultaneous Sampling ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7605-4
+      - adi,ad7606-8
+      - adi,ad7606-6
+      - adi,ad7606-4
+      - adi,ad7606b
+      - adi,ad7616
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  avcc-supply:
+    description:
+      Phandle to the Avcc power supply
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  adi,conversion-start-gpios:
+    description:
+      Must be the device tree identifier of the CONVST pin.
+      This logic input is used to initiate conversions on the analog
+      input channels. As the line is active high, it should be marked
+      GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. If specified,
+      it will be asserted during driver probe. As the line is active high,
+      it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  standby-gpios:
+    description:
+       Must be the device tree identifier of the STBY pin. This pin is used
+       to place the AD7606 into one of two power-down modes, Standby mode or
+       Shutdown mode. As the line is active low, it should be marked
+       GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,first-data-gpios:
+    description:
+      Must be the device tree identifier of the FRSTDATA pin.
+      The FRSTDATA output indicates when the first channel, V1, is
+      being read back on either the parallel, byte or serial interface.
+      As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,range-gpios:
+    description:
+      Must be the device tree identifier of the RANGE pin. The polarity on
+      this pin determines the input range of the analog input channels. If
+      this pin is tied to a logic high, the analog input range is ±10V for
+      all channels. If this pin is tied to a logic low, the analog input range
+      is ±5V for all channels. As the line is active high, it should be marked
+      GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,oversampling-ratio-gpios:
+    description:
+      Must be the device tree identifier of the over-sampling
+      mode pins. As the line is active high, it should be marked
+      GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,sw-mode:
+    description:
+      Software mode of operation, so far available only for ad7616 and ad7606b.
+      It is enabled when all three oversampling mode pins are connected to
+      high level. The device is configured by the corresponding registers. If the
+      adi,oversampling-ratio-gpios property is defined, then the driver will set the
+      oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired
+      to VDD.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - avcc-supply
+  - interrupts
+  - adi,conversion-start-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+                compatible = "adi,ad7606-8";
+                reg = <0>;
+                spi-max-frequency = <1000000>;
+                spi-cpol;
+                spi-cpha;
+
+                avcc-supply = <&adc_vref>;
+
+                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                interrupt-parent = <&gpio>;
+
+                adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+                reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+                adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
+                                                &gpio 23 GPIO_ACTIVE_HIGH
+                                                &gpio 26 GPIO_ACTIVE_HIGH>;
+                standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+                adi,sw-mode;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index 87407d110bb7..6d0c050d89fe 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -13,6 +13,7 @@ Required properties:
   "st,lsm6dsr"
   "st,lsm6ds3tr-c"
   "st,ism330dhcx"
+  "st,lsm9ds1-imu"
 - reg: i2c address of the sensor / spi cs line
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/iio/light/isl29501.txt b/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt
similarity index 100%
rename from Documentation/devicetree/bindings/iio/light/isl29501.txt
rename to Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index d39c510037a7..8c71957ca9d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -903,11 +903,12 @@ F:	Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
 
 ANALOG DEVICES INC AD7606 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
+M:	Beniamin Bia <beniamin.bia@analog.com>
 L:	linux-iio@vger.kernel.org
 W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/iio/adc/ad7606.c
-F:	Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
 
 ANALOG DEVICES INC AD7768-1 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
@@ -6341,7 +6342,7 @@ FLEXTIMER FTM-QUADDEC DRIVER
 M:	Patrick Havelange <patrick.havelange@essensium.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-bus-counter-ftm-quadddec
+F:	Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
 F:	Documentation/devicetree/bindings/counter/ftm-quaddec.txt
 F:	drivers/counter/ftm-quaddec.c
 
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 6645771aa349..fee535d6e45b 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1486,8 +1486,8 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KIOX0008", KXCJ91008},
 	{"KIOX0009", KXTJ21009},
 	{"KIOX000A", KXCJ91008},
-	{"KIOX010A", KXCJ91008}, /* KXCJ91008 inside the display of a 2-in-1 */
-	{"KIOX020A", KXCJ91008},
+	{"KIOX010A", KXCJ91008}, /* KXCJ91008 in the display of a yoga 2-in-1 */
+	{"KIOX020A", KXCJ91008}, /* KXCJ91008 in the base of a yoga 2-in-1 */
 	{"KXTJ1009", KXTJ21009},
 	{"KXJ2109",  KXTJ21009},
 	{"SMO8500",  KXCJ91008},
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index ed2d08437e5d..f5ba94c03a8d 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -410,12 +410,19 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
 		.oversampling_avail = ad7606_oversampling_avail,
 		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
 	},
+	[ID_AD7606B] = {
+		.channels = ad7606_channels,
+		.num_channels = 9,
+		.oversampling_avail = ad7606_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	},
 	[ID_AD7616] = {
 		.channels = ad7616_channels,
 		.num_channels = 17,
 		.oversampling_avail = ad7616_oversampling_avail,
 		.oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
 		.os_req_reset = true,
+		.init_delay_ms = 15,
 	},
 };
 
@@ -631,8 +638,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
 
 	/* AD7616 requires al least 15ms to reconfigure after a reset */
-	if (msleep_interruptible(15))
-		return -ERESTARTSYS;
+	if (st->chip_info->init_delay_ms) {
+		if (msleep_interruptible(st->chip_info->init_delay_ms))
+			return -ERESTARTSYS;
+	}
 
 	st->write_scale = ad7606_write_scale_hw;
 	st->write_os = ad7606_write_os_hw;
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index eeaaa8b905db..9350ef1f63b5 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -46,6 +46,8 @@
  *			oversampling ratios.
  * @oversampling_num	number of elements stored in oversampling_avail array
  * @os_req_reset	some devices require a reset to update oversampling
+ * @init_delay_ms	required delay in miliseconds for initialization
+ *			after a restart
  */
 struct ad7606_chip_info {
 	const struct iio_chan_spec	*channels;
@@ -53,6 +55,7 @@ struct ad7606_chip_info {
 	const unsigned int		*oversampling_avail;
 	unsigned int			oversampling_num;
 	bool				os_req_reset;
+	unsigned long			init_delay_ms;
 };
 
 /**
@@ -155,6 +158,7 @@ enum ad7606_supported_device_ids {
 	ID_AD7606_8,
 	ID_AD7606_6,
 	ID_AD7606_4,
+	ID_AD7606B,
 	ID_AD7616,
 };
 
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
index 98ed52b74507..29945ad07dca 100644
--- a/drivers/iio/adc/ad7606_spi.c
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -28,9 +28,23 @@
  * an offset of 2 for register address.
  */
 #define AD7616_RANGE_CH_ADDR(ch)	((ch) >> 2)
-/* The range of the channel is stored on 2 bits*/
+/* The range of the channel is stored in 2 bits */
 #define AD7616_RANGE_CH_MSK(ch)		(0b11 << (((ch) & 0b11) * 2))
 #define AD7616_RANGE_CH_MODE(ch, mode)	((mode) << ((((ch) & 0b11)) * 2))
+
+#define AD7606_CONFIGURATION_REGISTER	0x02
+#define AD7606_SINGLE_DOUT		0x00
+
+/*
+ * Range for AD7606B channels are stored in registers starting with address 0x3.
+ * Each register stores range for 2 channels(4 bits per channel).
+ */
+#define AD7606_RANGE_CH_MSK(ch)		(GENMASK(3, 0) << (4 * ((ch) & 0x1)))
+#define AD7606_RANGE_CH_MODE(ch, mode)	\
+	((GENMASK(3, 0) & mode) << (4 * ((ch) & 0x1)))
+#define AD7606_RANGE_CH_ADDR(ch)	(0x03 + ((ch) >> 1))
+#define AD7606_OS_MODE			0x08
+
 static const struct iio_chan_spec ad7616_sw_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(16),
 	AD7616_CHANNEL(0),
@@ -51,6 +65,22 @@ static const struct iio_chan_spec ad7616_sw_channels[] = {
 	AD7616_CHANNEL(15),
 };
 
+static const struct iio_chan_spec ad7606b_sw_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	AD7616_CHANNEL(0),
+	AD7616_CHANNEL(1),
+	AD7616_CHANNEL(2),
+	AD7616_CHANNEL(3),
+	AD7616_CHANNEL(4),
+	AD7616_CHANNEL(5),
+	AD7616_CHANNEL(6),
+	AD7616_CHANNEL(7),
+};
+
+static const unsigned int ad7606B_oversampling_avail[9] = {
+	1, 2, 4, 8, 16, 32, 64, 128, 256
+};
+
 static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)
 {
 	/*
@@ -60,6 +90,16 @@ static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)
 	return ((addr & 0x7F) << 1) | ((isWriteOp & 0x1) << 7);
 }
 
+static u16 ad7606B_spi_rd_wr_cmd(int addr, char is_write_op)
+{
+	/*
+	 * The address of register consists of one bit which
+	 * specifies a read command placed in bit 6, followed by
+	 * 6 bits of address.
+	 */
+	return (addr & 0x3F) | (((~is_write_op) & 0x1) << 6);
+}
+
 static int ad7606_spi_read_block(struct device *dev,
 				 int count, void *buf)
 {
@@ -169,6 +209,23 @@ static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)
 				     AD7616_OS_MASK, val << 2);
 }
 
+static int ad7606_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	return ad7606_spi_write_mask(st,
+				     AD7606_RANGE_CH_ADDR(ch),
+				     AD7606_RANGE_CH_MSK(ch),
+				     AD7606_RANGE_CH_MODE(ch, val));
+}
+
+static int ad7606_write_os_sw(struct iio_dev *indio_dev, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	return ad7606_spi_reg_write(st, AD7606_OS_MODE, val);
+}
+
 static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
 {
 	struct ad7606_state *st = iio_priv(indio_dev);
@@ -189,6 +246,42 @@ static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
 			      AD7616_BURST_MODE | AD7616_SEQEN_MODE);
 }
 
+static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	unsigned long os[3] = {1};
+
+	/*
+	 * Software mode is enabled when all three oversampling
+	 * pins are set to high. If oversampling gpios are defined
+	 * in the device tree, then they need to be set to high,
+	 * otherwise, they must be hardwired to VDD
+	 */
+	if (st->gpio_os) {
+		gpiod_set_array_value(ARRAY_SIZE(os),
+				      st->gpio_os->desc, st->gpio_os->info, os);
+	}
+	/* OS of 128 and 256 are available only in software mode */
+	st->oversampling_avail = ad7606B_oversampling_avail;
+	st->num_os_ratios = ARRAY_SIZE(ad7606B_oversampling_avail);
+
+	st->write_scale = ad7606_write_scale_sw;
+	st->write_os = &ad7606_write_os_sw;
+
+	/* Configure device spi to output on a single channel */
+	st->bops->reg_write(st,
+			    AD7606_CONFIGURATION_REGISTER,
+			    AD7606_SINGLE_DOUT);
+
+	/*
+	 * Scale can be configured individually for each channel
+	 * in software mode.
+	 */
+	indio_dev->channels = ad7606b_sw_channels;
+
+	return 0;
+}
+
 static const struct ad7606_bus_ops ad7606_spi_bops = {
 	.read_block = ad7606_spi_read_block,
 };
@@ -202,6 +295,15 @@ static const struct ad7606_bus_ops ad7616_spi_bops = {
 	.sw_mode_config = ad7616_sw_mode_config,
 };
 
+static const struct ad7606_bus_ops ad7606B_spi_bops = {
+	.read_block = ad7606_spi_read_block,
+	.reg_read = ad7606_spi_reg_read,
+	.reg_write = ad7606_spi_reg_write,
+	.write_mask = ad7606_spi_write_mask,
+	.rd_wr_cmd = ad7606B_spi_rd_wr_cmd,
+	.sw_mode_config = ad7606B_sw_mode_config,
+};
+
 static int ad7606_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
@@ -211,6 +313,9 @@ static int ad7606_spi_probe(struct spi_device *spi)
 	case ID_AD7616:
 		bops = &ad7616_spi_bops;
 		break;
+	case ID_AD7606B:
+		bops = &ad7606B_spi_bops;
+		break;
 	default:
 		bops = &ad7606_spi_bops;
 		break;
@@ -226,6 +331,7 @@ static const struct spi_device_id ad7606_id_table[] = {
 	{ "ad7606-4", ID_AD7606_4 },
 	{ "ad7606-6", ID_AD7606_6 },
 	{ "ad7606-8", ID_AD7606_8 },
+	{ "ad7606b",  ID_AD7606B },
 	{ "ad7616",   ID_AD7616 },
 	{}
 };
@@ -236,6 +342,7 @@ static const struct of_device_id ad7606_of_match[] = {
 	{ .compatible = "adi,ad7606-4" },
 	{ .compatible = "adi,ad7606-6" },
 	{ .compatible = "adi,ad7606-8" },
+	{ .compatible = "adi,ad7606b" },
 	{ .compatible = "adi,ad7616" },
 	{ },
 };
diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index da84adfdb819..214883458582 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -427,8 +427,9 @@ static int max1027_probe(struct spi_device *spi)
 		return -ENOMEM;
 	}
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-					 &max1027_trigger_handler, NULL);
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+					&iio_pollfunc_store_time,
+					&max1027_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&indio_dev->dev, "Failed to setup buffer\n");
 		return ret;
@@ -439,7 +440,7 @@ static int max1027_probe(struct spi_device *spi)
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		dev_err(&indio_dev->dev, "Failed to allocate iio trigger\n");
-		goto fail_trigger_alloc;
+		return ret;
 	}
 
 	st->trig->ops = &max1027_trigger_ops;
@@ -454,7 +455,7 @@ static int max1027_probe(struct spi_device *spi)
 					spi->dev.driver->name, st->trig);
 	if (ret < 0) {
 		dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n");
-		goto fail_dev_register;
+		return ret;
 	}
 
 	/* Disable averaging */
@@ -462,34 +463,10 @@ static int max1027_probe(struct spi_device *spi)
 	ret = spi_write(st->spi, &st->reg, 1);
 	if (ret < 0) {
 		dev_err(&indio_dev->dev, "Failed to configure averaging register\n");
-		goto fail_dev_register;
+		return ret;
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&indio_dev->dev, "Failed to register iio device\n");
-		goto fail_dev_register;
-	}
-
-	return 0;
-
-fail_dev_register:
-fail_trigger_alloc:
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return ret;
-}
-
-static int max1027_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-
-	pr_debug("%s: remove(spi = 0x%p)\n", __func__, spi);
-
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
 static struct spi_driver max1027_driver = {
@@ -498,7 +475,6 @@ static struct spi_driver max1027_driver = {
 		.of_match_table = of_match_ptr(max1027_adc_dt_ids),
 	},
 	.probe		= max1027_probe,
-	.remove		= max1027_remove,
 	.id_table	= max1027_id,
 };
 module_spi_driver(max1027_driver);
diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
index c2203a46f0d8..a6c046575ec3 100644
--- a/drivers/iio/adc/sc27xx_adc.c
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -3,7 +3,6 @@
 
 #include <linux/hwspinlock.h>
 #include <linux/iio/iio.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
@@ -46,14 +45,18 @@
 /* Bits definitions for SC27XX_ADC_INT_CLR registers */
 #define SC27XX_ADC_IRQ_CLR		BIT(0)
 
+/* Bits definitions for SC27XX_ADC_INT_RAW registers */
+#define SC27XX_ADC_IRQ_RAW		BIT(0)
+
 /* Mask definition for SC27XX_ADC_DATA register */
 #define SC27XX_ADC_DATA_MASK		GENMASK(11, 0)
 
 /* Timeout (ms) for the trylock of hardware spinlocks */
 #define SC27XX_ADC_HWLOCK_TIMEOUT	5000
 
-/* Timeout (ms) for ADC data conversion according to ADC datasheet */
-#define SC27XX_ADC_RDY_TIMEOUT		100
+/* Timeout (us) for ADC data conversion according to ADC datasheet */
+#define SC27XX_ADC_RDY_TIMEOUT		1000000
+#define SC27XX_ADC_POLL_RAW_STATUS	500
 
 /* Maximum ADC channel number */
 #define SC27XX_ADC_CHANNEL_MAX		32
@@ -72,10 +75,8 @@ struct sc27xx_adc_data {
 	 * subsystems which will access the unique ADC controller.
 	 */
 	struct hwspinlock *hwlock;
-	struct completion completion;
 	int channel_scale[SC27XX_ADC_CHANNEL_MAX];
 	u32 base;
-	int value;
 	int irq;
 };
 
@@ -188,9 +189,7 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
 			   int scale, int *val)
 {
 	int ret;
-	u32 tmp;
-
-	reinit_completion(&data->completion);
+	u32 tmp, value, status;
 
 	ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT);
 	if (ret) {
@@ -203,6 +202,11 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
 	if (ret)
 		goto unlock_adc;
 
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
+				 SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
+	if (ret)
+		goto disable_adc;
+
 	/* Configure the channel id and scale */
 	tmp = (scale << SC27XX_ADC_SCALE_SHIFT) & SC27XX_ADC_SCALE_MASK;
 	tmp |= channel & SC27XX_ADC_CHN_ID_MASK;
@@ -226,15 +230,22 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
 	if (ret)
 		goto disable_adc;
 
-	ret = wait_for_completion_timeout(&data->completion,
-				msecs_to_jiffies(SC27XX_ADC_RDY_TIMEOUT));
-	if (!ret) {
-		dev_err(data->dev, "read ADC data timeout\n");
-		ret = -ETIMEDOUT;
-	} else {
-		ret = 0;
+	ret = regmap_read_poll_timeout(data->regmap,
+				       data->base + SC27XX_ADC_INT_RAW,
+				       status, (status & SC27XX_ADC_IRQ_RAW),
+				       SC27XX_ADC_POLL_RAW_STATUS,
+				       SC27XX_ADC_RDY_TIMEOUT);
+	if (ret) {
+		dev_err(data->dev, "read adc timeout, status = 0x%x\n", status);
+		goto disable_adc;
 	}
 
+	ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA, &value);
+	if (ret)
+		goto disable_adc;
+
+	value &= SC27XX_ADC_DATA_MASK;
+
 disable_adc:
 	regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
 			   SC27XX_ADC_EN, 0);
@@ -242,32 +253,11 @@ unlock_adc:
 	hwspin_unlock_raw(data->hwlock);
 
 	if (!ret)
-		*val = data->value;
+		*val = value;
 
 	return ret;
 }
 
-static irqreturn_t sc27xx_adc_isr(int irq, void *dev_id)
-{
-	struct sc27xx_adc_data *data = dev_id;
-	int ret;
-
-	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
-				 SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
-	if (ret)
-		return IRQ_RETVAL(ret);
-
-	ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA,
-			  &data->value);
-	if (ret)
-		return IRQ_RETVAL(ret);
-
-	data->value &= SC27XX_ADC_DATA_MASK;
-	complete(&data->completion);
-
-	return IRQ_HANDLED;
-}
-
 static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
 				  int channel, int scale,
 				  u32 *div_numerator, u32 *div_denominator)
@@ -454,11 +444,6 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
 	if (ret)
 		goto disable_adc;
 
-	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
-				 SC27XX_ADC_IRQ_EN, SC27XX_ADC_IRQ_EN);
-	if (ret)
-		goto disable_clk;
-
 	/* ADC channel scales' calibration from nvmem device */
 	ret = sc27xx_adc_scale_calibration(data, true);
 	if (ret)
@@ -484,9 +469,6 @@ static void sc27xx_adc_disable(void *_data)
 {
 	struct sc27xx_adc_data *data = _data;
 
-	regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
-			   SC27XX_ADC_IRQ_EN, 0);
-
 	/* Disable ADC work clock and controller clock */
 	regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
 			   SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
@@ -551,7 +533,6 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	init_completion(&sc27xx_data->completion);
 	sc27xx_data->dev = dev;
 
 	ret = sc27xx_adc_enable(sc27xx_data);
@@ -566,14 +547,6 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = devm_request_threaded_irq(dev, sc27xx_data->irq, NULL,
-					sc27xx_adc_isr, IRQF_ONESHOT,
-					pdev->name, sc27xx_data);
-	if (ret) {
-		dev_err(dev, "failed to request ADC irq\n");
-		return ret;
-	}
-
 	indio_dev->dev.parent = dev;
 	indio_dev->name = dev_name(dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index fd833295bb17..d44ae126f457 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -90,7 +90,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
 	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
 	u32 ver_mask;
-	int ret;
+	int ret, i;
 
 	platform_set_drvdata(pdev, indio_dev);
 
@@ -136,6 +136,9 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 		/* Set sign vector, only used for backward compatibility. */
 		memset(state->sign, 1, CROS_EC_SENSOR_MAX_AXIS);
 
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			state->calib[i].scale = MOTION_SENSE_DEFAULT_SCALE;
+
 		/* 0 is a correct value used to stop the device */
 		state->frequencies[0] = 0;
 		if (state->msg->version < 3) {
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
index a8a3fe428d8d..b9dd19b34267 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/hid-sensor-hub.h>
 #include <linux/iio/iio.h>
@@ -68,16 +69,6 @@ static struct {
 	{HID_USAGE_SENSOR_HUMIDITY, 0, 1000, 0},
 };
 
-static int pow_10(unsigned power)
-{
-	int i;
-	int ret = 1;
-	for (i = 0; i < power; ++i)
-		ret = ret * 10;
-
-	return ret;
-}
-
 static void simple_div(int dividend, int divisor, int *whole,
 				int *micro_frac)
 {
@@ -96,14 +87,14 @@ static void simple_div(int dividend, int divisor, int *whole,
 			rem *= 10;
 			exp++;
 		}
-		*micro_frac = (rem / divisor) * pow_10(6-exp);
+		*micro_frac = (rem / divisor) * int_pow(10, 6 - exp);
 	}
 }
 
 static void split_micro_fraction(unsigned int no, int exp, int *val1, int *val2)
 {
-	*val1 = no/pow_10(exp);
-	*val2 = no%pow_10(exp) * pow_10(6-exp);
+	*val1 = no / int_pow(10, exp);
+	*val2 = no % int_pow(10, exp) * int_pow(10, 6 - exp);
 }
 
 /*
@@ -125,7 +116,7 @@ static void convert_from_vtf_format(u32 value, int size, int exp,
 	}
 	exp = hid_sensor_convert_exponent(exp);
 	if (exp >= 0) {
-		*val1 = sign * value * pow_10(exp);
+		*val1 = sign * value * int_pow(10, exp);
 		*val2 = 0;
 	} else {
 		split_micro_fraction(value, -exp, val1, val2);
@@ -145,10 +136,10 @@ static u32 convert_to_vtf_format(int size, int exp, int val1, int val2)
 		sign = -1;
 	exp = hid_sensor_convert_exponent(exp);
 	if (exp < 0) {
-		value = abs(val1) * pow_10(-exp);
-		value += abs(val2) / pow_10(6+exp);
+		value = abs(val1) * int_pow(10, -exp);
+		value += abs(val2) / int_pow(10, 6 + exp);
 	} else
-		value = abs(val1) / pow_10(exp);
+		value = abs(val1) / int_pow(10, exp);
 	if (sign < 0)
 		value =  ((1LL << (size * 8)) - value);
 
@@ -211,12 +202,12 @@ int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
 	if (val1 < 0 || val2 < 0)
 		return -EINVAL;
 
-	value = val1 * pow_10(6) + val2;
+	value = val1 * int_pow(10, 6) + val2;
 	if (value) {
 		if (st->poll.units == HID_USAGE_SENSOR_UNITS_MILLISECOND)
-			value = pow_10(9)/value;
+			value = int_pow(10, 9) / value;
 		else if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
-			value = pow_10(6)/value;
+			value = int_pow(10, 6) / value;
 		else
 			value = 0;
 	}
@@ -311,34 +302,34 @@ static void adjust_exponent_nano(int *val0, int *val1, int scale0,
 	int rem;
 
 	if (exp > 0) {
-		*val0 = scale0 * pow_10(exp);
+		*val0 = scale0 * int_pow(10, exp);
 		res = 0;
 		if (exp > 9) {
 			*val1 = 0;
 			return;
 		}
 		for (i = 0; i < exp; ++i) {
-			x = scale1 / pow_10(8 - i);
-			res += (pow_10(exp - 1 - i) * x);
-			scale1 = scale1 % pow_10(8 - i);
+			x = scale1 / int_pow(10, 8 - i);
+			res += int_pow(10, exp - 1 - i) * x;
+			scale1 = scale1 % int_pow(10, 8 - i);
 		}
 		*val0 += res;
-		*val1 = scale1 * pow_10(exp);
+		*val1 = scale1 * int_pow(10, exp);
 	} else if (exp < 0) {
 		exp = abs(exp);
 		if (exp > 9) {
 			*val0 = *val1 = 0;
 			return;
 		}
-		*val0 = scale0 / pow_10(exp);
-		rem = scale0 % pow_10(exp);
+		*val0 = scale0 / int_pow(10, exp);
+		rem = scale0 % int_pow(10, exp);
 		res = 0;
 		for (i = 0; i < (9 - exp); ++i) {
-			x = scale1 / pow_10(8 - i);
-			res += (pow_10(8 - exp - i) * x);
-			scale1 = scale1 % pow_10(8 - i);
+			x = scale1 / int_pow(10, 8 - i);
+			res += int_pow(10, 8 - exp - i) * x;
+			scale1 = scale1 % int_pow(10, 8 - i);
 		}
-		*val1 = rem * pow_10(9 - exp) + res;
+		*val1 = rem * int_pow(10, 9 - exp) + res;
 	} else {
 		*val0 = scale0;
 		*val1 = scale1;
diff --git a/drivers/iio/common/st_sensors/Kconfig b/drivers/iio/common/st_sensors/Kconfig
index 91b98e152d75..9364ec7a811f 100644
--- a/drivers/iio/common/st_sensors/Kconfig
+++ b/drivers/iio/common/st_sensors/Kconfig
@@ -5,9 +5,11 @@
 
 config IIO_ST_SENSORS_I2C
 	tristate
+	select REGMAP_I2C
 
 config IIO_ST_SENSORS_SPI
 	tristate
+	select REGMAP_SPI
 
 config IIO_ST_SENSORS_CORE
 	tristate
diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c
index 4335214800d2..2ebe08326048 100644
--- a/drivers/iio/dac/ad5380.c
+++ b/drivers/iio/dac/ad5380.c
@@ -220,7 +220,7 @@ static int ad5380_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 		*val >>= chan->scan_type.shift;
-		val -= (1 << chan->scan_type.realbits) / 2;
+		*val -= (1 << chan->scan_type.realbits) / 2;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 2 * st->vref;
diff --git a/drivers/iio/imu/adis16460.c b/drivers/iio/imu/adis16460.c
index 1ef11640ee20..6aed9e84abbf 100644
--- a/drivers/iio/imu/adis16460.c
+++ b/drivers/iio/imu/adis16460.c
@@ -152,7 +152,7 @@ static int adis16460_debugfs_init(struct iio_dev *indio_dev)
 static int adis16460_set_freq(struct iio_dev *indio_dev, int val, int val2)
 {
 	struct adis16460 *st = iio_priv(indio_dev);
-	unsigned int t;
+	int t;
 
 	t =  val * 1000 + val2 / 1000;
 	if (t <= 0)
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 939058b27746..77aa0e77212d 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
 	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c,
-	  ism330dhcx
+	  ism330dhcx and the accelerometer/gyroscope of lsm9ds1.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 4e8e67ae1632..80e42c7dbcbe 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -24,6 +24,7 @@
 #define ST_LSM6DSR_DEV_NAME	"lsm6dsr"
 #define ST_LSM6DS3TRC_DEV_NAME	"lsm6ds3tr-c"
 #define ST_ISM330DHCX_DEV_NAME	"ism330dhcx"
+#define ST_LSM9DS1_DEV_NAME	"lsm9ds1-imu"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,
@@ -37,6 +38,7 @@ enum st_lsm6dsx_hw_id {
 	ST_LSM6DSR_ID,
 	ST_LSM6DS3TRC_ID,
 	ST_ISM330DHCX_ID,
+	ST_LSM9DS1_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 
@@ -75,6 +77,7 @@ struct st_lsm6dsx_reg {
 	u8 mask;
 };
 
+struct st_lsm6dsx_sensor;
 struct st_lsm6dsx_hw;
 
 struct st_lsm6dsx_odr {
@@ -101,12 +104,14 @@ struct st_lsm6dsx_fs_table_entry {
 
 /**
  * struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings
+ * @update_fifo: Update FIFO configuration callback.
  * @read_fifo: Read FIFO callback.
  * @fifo_th: FIFO threshold register info (addr + mask).
  * @fifo_diff: FIFO diff status register info (addr + mask).
  * @th_wl: FIFO threshold word length.
  */
 struct st_lsm6dsx_fifo_ops {
+	int (*update_fifo)(struct st_lsm6dsx_sensor *sensor, bool enable);
 	int (*read_fifo)(struct st_lsm6dsx_hw *hw);
 	struct {
 		u8 addr;
@@ -200,6 +205,9 @@ struct st_lsm6dsx_ext_dev_settings {
 /**
  * struct st_lsm6dsx_settings - ST IMU sensor settings
  * @wai: Sensor WhoAmI default value.
+ * @int1_addr: Control Register address for INT1
+ * @int2_addr: Control Register address for INT2
+ * @reset_addr: register address for reset/reboot
  * @max_fifo_size: Sensor max fifo length in FIFO words.
  * @id: List of hw id/device name supported by the driver configuration.
  * @channels: IIO channels supported by the device.
@@ -213,6 +221,9 @@ struct st_lsm6dsx_ext_dev_settings {
  */
 struct st_lsm6dsx_settings {
 	u8 wai;
+	u8 int1_addr;
+	u8 int2_addr;
+	u8 reset_addr;
 	u16 max_fifo_size;
 	struct {
 		enum st_lsm6dsx_hw_id hw_id;
@@ -327,6 +338,7 @@ int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw);
 int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val);
 int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
 				u16 watermark);
+int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable);
 int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw);
 int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
 			     enum st_lsm6dsx_fifo_mode fifo_mode);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 2c03a5b80f80..b0f3da1976e4 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -602,9 +602,8 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
 	return err;
 }
 
-static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable)
+int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 {
-	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int err;
 
@@ -676,12 +675,24 @@ static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 
 static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
 {
-	return st_lsm6dsx_update_fifo(iio_dev, true);
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (!hw->settings->fifo_ops.update_fifo)
+		return -ENOTSUPP;
+
+	return hw->settings->fifo_ops.update_fifo(sensor, true);
 }
 
 static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev)
 {
-	return st_lsm6dsx_update_fifo(iio_dev, false);
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (!hw->settings->fifo_ops.update_fifo)
+		return -ENOTSUPP;
+
+	return hw->settings->fifo_ops.update_fifo(sensor, false);
 }
 
 static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 85824d6739ee..2d3495560136 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -10,6 +10,8 @@
  * +-125/+-245/+-500/+-1000/+-2000 dps
  * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer
  * allowing dynamic batching of sensor data.
+ * LSM9DSx series is similar but includes an additional magnetometer, handled
+ * by a different driver.
  *
  * Supported sensors:
  * - LSM6DS3:
@@ -30,6 +32,13 @@
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 3KB
  *
+ * - LSM9DS1:
+ *   - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952
+ *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ *   - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952
+ *   - Gyroscope supported full-scale [dps]: +-245/+-500/+-2000
+ *   - FIFO size: 32
+ *
  * Copyright 2016 STMicroelectronics Inc.
  *
  * Lorenzo Bianconi <lorenzo.bianconi@st.com>
@@ -49,17 +58,12 @@
 
 #include "st_lsm6dsx.h"
 
-#define ST_LSM6DSX_REG_INT1_ADDR		0x0d
-#define ST_LSM6DSX_REG_INT2_ADDR		0x0e
 #define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK	BIT(3)
 #define ST_LSM6DSX_REG_WHOAMI_ADDR		0x0f
-#define ST_LSM6DSX_REG_RESET_ADDR		0x12
 #define ST_LSM6DSX_REG_RESET_MASK		BIT(0)
 #define ST_LSM6DSX_REG_BOOT_MASK		BIT(7)
 #define ST_LSM6DSX_REG_BDU_ADDR			0x12
 #define ST_LSM6DSX_REG_BDU_MASK			BIT(6)
-#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR	0x13
-#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK	BIT(5)
 
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
 	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
@@ -75,9 +79,89 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x18, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1c, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
+	{
+		.wai = 0x68,
+		.int1_addr = 0x0c,
+		.int2_addr = 0x0d,
+		.reset_addr = 0x22,
+		.max_fifo_size = 32,
+		.id = {
+			{
+				.hw_id = ST_LSM9DS1_ID,
+				.name = ST_LSM9DS1_DEV_NAME,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6ds0_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6ds0_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x20,
+					.mask = GENMASK(7, 5),
+				},
+				.odr_avl[0] = {  10, 0x01 },
+				.odr_avl[1] = {  50, 0x02 },
+				.odr_avl[2] = { 119, 0x03 },
+				.odr_avl[3] = { 238, 0x04 },
+				.odr_avl[4] = { 476, 0x05 },
+				.odr_avl[5] = { 952, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 5),
+				},
+				.odr_avl[0] = {  15, 0x01 },
+				.odr_avl[1] = {  60, 0x02 },
+				.odr_avl[2] = { 119, 0x03 },
+				.odr_avl[3] = { 238, 0x04 },
+				.odr_avl[4] = { 476, 0x05 },
+				.odr_avl[5] = { 952, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x20,
+					.mask = GENMASK(4, 3),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(732), 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(4, 3),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(245), 0x0 },
+				.fs_avl[1] = {  IIO_DEGREE_TO_RAD(500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
+			},
+		},
+	},
 	{
 		.wai = 0x69,
+		.int1_addr = 0x0d,
+		.int2_addr = 0x0e,
+		.reset_addr = 0x12,
 		.max_fifo_size = 1365,
 		.id = {
 			{
@@ -154,6 +238,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 		},
 		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_fifo,
 			.fifo_th = {
 				.addr = 0x06,
@@ -186,6 +271,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x69,
+		.int1_addr = 0x0d,
+		.int2_addr = 0x0e,
+		.reset_addr = 0x12,
 		.max_fifo_size = 682,
 		.id = {
 			{
@@ -262,6 +350,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 		},
 		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_fifo,
 			.fifo_th = {
 				.addr = 0x06,
@@ -294,6 +383,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x6a,
+		.int1_addr = 0x0d,
+		.int2_addr = 0x0e,
+		.reset_addr = 0x12,
 		.max_fifo_size = 682,
 		.id = {
 			{
@@ -379,6 +471,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 		},
 		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_fifo,
 			.fifo_th = {
 				.addr = 0x06,
@@ -411,6 +504,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x6c,
+		.int1_addr = 0x0d,
+		.int2_addr = 0x0e,
+		.reset_addr = 0x12,
 		.max_fifo_size = 512,
 		.id = {
 			{
@@ -490,6 +586,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 		},
 		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_tagged_fifo,
 			.fifo_th = {
 				.addr = 0x07,
@@ -497,7 +594,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 			.fifo_diff = {
 				.addr = 0x3a,
-				.mask = GENMASK(8, 0),
+				.mask = GENMASK(9, 0),
 			},
 			.th_wl = 1,
 		},
@@ -540,6 +637,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x6b,
+		.int1_addr = 0x0d,
+		.int2_addr = 0x0e,
+		.reset_addr = 0x12,
 		.max_fifo_size = 512,
 		.id = {
 			{
@@ -616,6 +716,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 		},
 		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_tagged_fifo,
 			.fifo_th = {
 				.addr = 0x07,
@@ -623,7 +724,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 			.fifo_diff = {
 				.addr = 0x3a,
-				.mask = GENMASK(8, 0),
+				.mask = GENMASK(9, 0),
 			},
 			.th_wl = 1,
 		},
@@ -640,6 +741,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 	{
 		.wai = 0x6b,
+		.int1_addr = 0x0d,
+		.int2_addr = 0x0e,
+		.reset_addr = 0x12,
 		.max_fifo_size = 512,
 		.id = {
 			{
@@ -719,6 +823,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 		},
 		.fifo_ops = {
+			.update_fifo = st_lsm6dsx_update_fifo,
 			.read_fifo = st_lsm6dsx_read_tagged_fifo,
 			.fifo_th = {
 				.addr = 0x07,
@@ -726,7 +831,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			},
 			.fifo_diff = {
 				.addr = 0x3a,
-				.mask = GENMASK(8, 0),
+				.mask = GENMASK(9, 0),
 			},
 			.th_wl = 1,
 		},
@@ -1090,13 +1195,19 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
 					    char *buf)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	const struct st_lsm6dsx_fs_table_entry *fs_table;
 	enum st_lsm6dsx_sensor_id id = sensor->id;
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int i, len = 0;
 
-	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
+	fs_table = &hw->settings->fs_table[id];
+	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) {
+		if (!fs_table->fs_avl[i].gain)
+			break;
+
 		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
-				 hw->settings->fs_table[id].fs_avl[i].gain);
+				 fs_table->fs_avl[i].gain);
+	}
 	buf[len - 1] = '\n';
 
 	return len;
@@ -1166,10 +1277,10 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
 
 	switch (drdy_pin) {
 	case 1:
-		*drdy_reg = ST_LSM6DSX_REG_INT1_ADDR;
+		*drdy_reg = hw->settings->int1_addr;
 		break;
 	case 2:
-		*drdy_reg = ST_LSM6DSX_REG_INT2_ADDR;
+		*drdy_reg = hw->settings->int2_addr;
 		break;
 	default:
 		dev_err(hw->dev, "unsupported data ready pin\n");
@@ -1269,7 +1380,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
 	int err;
 
 	/* device sw reset */
-	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+	err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
 				 ST_LSM6DSX_REG_RESET_MASK,
 				 FIELD_PREP(ST_LSM6DSX_REG_RESET_MASK, 1));
 	if (err < 0)
@@ -1278,7 +1389,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
 	msleep(50);
 
 	/* reload trimming parameter */
-	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+	err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
 				 ST_LSM6DSX_REG_BOOT_MASK,
 				 FIELD_PREP(ST_LSM6DSX_REG_BOOT_MASK, 1));
 	if (err < 0)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 15c6aa5b6caa..f52511059545 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,ism330dhcx",
 		.data = (void *)ST_ISM330DHCX_ID,
 	},
+	{
+		.compatible = "st,lsm9ds1-imu",
+		.data = (void *)ST_LSM9DS1_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -99,6 +103,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
 	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
 	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index a8430ee11310..344b28dddebb 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,ism330dhcx",
 		.data = (void *)ST_ISM330DHCX_ID,
 	},
+	{
+		.compatible = "st,lsm9ds1-imu",
+		.data = (void *)ST_LSM9DS1_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -99,6 +103,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
 	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
 	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index 6b5cce6f1a7b..d53601447da4 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -62,7 +62,7 @@ config RFD77402
 	tristate "RFD77402 ToF sensor"
 	depends on I2C
 	help
-	  Say Y to build a driver for the RFD77420 Time-of-Flight (distance)
+	  Say Y to build a driver for the RFD77402 Time-of-Flight (distance)
 	  sensor module with I2C interface.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/staging/iio/accel/adis16240.c b/drivers/staging/iio/accel/adis16240.c
index 62f4b3b1b457..82099db4bf0c 100644
--- a/drivers/staging/iio/accel/adis16240.c
+++ b/drivers/staging/iio/accel/adis16240.c
@@ -309,15 +309,12 @@ static int adis16240_write_raw(struct iio_dev *indio_dev,
 			       long mask)
 {
 	struct adis *st = iio_priv(indio_dev);
-	int bits = 10;
-	s16 val16;
 	u8 addr;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
-		val16 = val & ((1 << bits) - 1);
 		addr = adis16240_addresses[chan->scan_index][0];
-		return adis_write_reg_16(st, addr, val16);
+		return adis_write_reg_16(st, addr, val & GENMASK(9, 0));
 	}
 	return -EINVAL;
 }
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index df06e0570f9b..e6b660489165 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -25,8 +25,6 @@
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/adc/ad_sigma_delta.h>
 
-#include "ad7192.h"
-
 /* Registers */
 #define AD7192_REG_COMM		0 /* Communications Register (WO, 8-bit) */
 #define AD7192_REG_STAT		0 /* Status Register	     (RO, 8-bit) */
@@ -145,6 +143,10 @@
 #define AD7192_EXT_FREQ_MHZ_MAX	5120000
 #define AD7192_INT_FREQ_MHZ	4915200
 
+#define AD7192_NO_SYNC_FILTER	1
+#define AD7192_SYNC3_FILTER	3
+#define AD7192_SYNC4_FILTER	4
+
 /* NOTE:
  * The AD7190/2/5 features a dual use data out ready DOUT/RDY output.
  * In order to avoid contentions on the SPI bus, it's therefore necessary
@@ -252,7 +254,7 @@ static int ad7192_of_clock_select(struct ad7192_state *st)
 static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
 {
 	struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi);
-	bool rej60_en, sinc3_en, refin2_en, chop_en;
+	bool rej60_en, refin2_en;
 	bool buf_en, bipolar, burnout_curr_en;
 	unsigned long long scale_uv;
 	int i, ret, id;
@@ -284,24 +286,12 @@ static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
 	if (rej60_en)
 		st->mode |= AD7192_MODE_REJ60;
 
-	sinc3_en = of_property_read_bool(np, "adi,sinc3-filter-enable");
-	if (sinc3_en)
-		st->mode |= AD7192_MODE_SINC3;
-
 	refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
 	if (refin2_en && st->devid != ID_AD7195)
 		st->conf |= AD7192_CONF_REFSEL;
 
-	chop_en = of_property_read_bool(np, "adi,chop-enable");
-	if (chop_en) {
-		st->conf |= AD7192_CONF_CHOP;
-		if (sinc3_en)
-			st->f_order = 3; /* SINC 3rd order */
-		else
-			st->f_order = 4; /* SINC 4th order */
-	} else {
-		st->f_order = 1;
-	}
+	st->conf &= ~AD7192_CONF_CHOP;
+	st->f_order = AD7192_NO_SYNC_FILTER;
 
 	buf_en = of_property_read_bool(np, "adi,buffer-enable");
 	if (buf_en)
@@ -313,7 +303,7 @@ static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
 
 	burnout_curr_en = of_property_read_bool(np,
 						"adi,burnout-currents-enable");
-	if (burnout_curr_en && buf_en && !chop_en) {
+	if (burnout_curr_en && buf_en) {
 		st->conf |= AD7192_CONF_BURN;
 	} else if (burnout_curr_en) {
 		dev_warn(&st->sd.spi->dev,
@@ -411,6 +401,49 @@ static ssize_t ad7192_set(struct device *dev,
 	return ret ? ret : len;
 }
 
+static void ad7192_get_available_filter_freq(struct ad7192_state *st,
+						    int *freq)
+{
+	unsigned int fadc;
+
+	/* Formulas for filter at page 25 of the datasheet */
+	fadc = DIV_ROUND_CLOSEST(st->fclk,
+				 AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode));
+	freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
+
+	fadc = DIV_ROUND_CLOSEST(st->fclk,
+				 AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode));
+	freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
+
+	fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode));
+	freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024);
+	freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024);
+}
+
+static ssize_t ad7192_show_filter_avail(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7192_state *st = iio_priv(indio_dev);
+	unsigned int freq_avail[4], i;
+	size_t len = 0;
+
+	ad7192_get_available_filter_freq(st, freq_avail);
+
+	for (i = 0; i < ARRAY_SIZE(freq_avail); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "%d.%d ", freq_avail[i] / 1000,
+				 freq_avail[i] % 1000);
+
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available,
+		       0444, ad7192_show_filter_avail, NULL, 0);
+
 static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
 		       ad7192_show_bridge_switch, ad7192_set,
 		       AD7192_REG_GPOCON);
@@ -420,6 +453,7 @@ static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
 		       AD7192_REG_MODE);
 
 static struct attribute *ad7192_attributes[] = {
+	&iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
 	&iio_dev_attr_bridge_switch_en.dev_attr.attr,
 	&iio_dev_attr_ac_excitation_en.dev_attr.attr,
 	NULL
@@ -430,6 +464,7 @@ static const struct attribute_group ad7192_attribute_group = {
 };
 
 static struct attribute *ad7195_attributes[] = {
+	&iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
 	&iio_dev_attr_bridge_switch_en.dev_attr.attr,
 	NULL
 };
@@ -443,6 +478,75 @@ static unsigned int ad7192_get_temp_scale(bool unipolar)
 	return unipolar ? 2815 * 2 : 2815;
 }
 
+static int ad7192_set_3db_filter_freq(struct ad7192_state *st,
+				      int val, int val2)
+{
+	int freq_avail[4], i, ret, freq;
+	unsigned int diff_new, diff_old;
+	int idx = 0;
+
+	diff_old = U32_MAX;
+	freq = val * 1000 + val2;
+
+	ad7192_get_available_filter_freq(st, freq_avail);
+
+	for (i = 0; i < ARRAY_SIZE(freq_avail); i++) {
+		diff_new = abs(freq - freq_avail[i]);
+		if (diff_new < diff_old) {
+			diff_old = diff_new;
+			idx = i;
+		}
+	}
+
+	switch (idx) {
+	case 0:
+		st->f_order = AD7192_SYNC4_FILTER;
+		st->mode &= ~AD7192_MODE_SINC3;
+
+		st->conf |= AD7192_CONF_CHOP;
+		break;
+	case 1:
+		st->f_order = AD7192_SYNC3_FILTER;
+		st->mode |= AD7192_MODE_SINC3;
+
+		st->conf |= AD7192_CONF_CHOP;
+		break;
+	case 2:
+		st->f_order = AD7192_NO_SYNC_FILTER;
+		st->mode &= ~AD7192_MODE_SINC3;
+
+		st->conf &= ~AD7192_CONF_CHOP;
+		break;
+	case 3:
+		st->f_order = AD7192_NO_SYNC_FILTER;
+		st->mode |= AD7192_MODE_SINC3;
+
+		st->conf &= ~AD7192_CONF_CHOP;
+		break;
+	}
+
+	ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+	if (ret < 0)
+		return ret;
+
+	return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+}
+
+static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
+{
+	unsigned int fadc;
+
+	fadc = DIV_ROUND_CLOSEST(st->fclk,
+				 st->f_order * AD7192_MODE_RATE(st->mode));
+
+	if (st->conf & AD7192_CONF_CHOP)
+		return DIV_ROUND_CLOSEST(fadc * 240, 1024);
+	if (st->mode & AD7192_MODE_SINC3)
+		return DIV_ROUND_CLOSEST(fadc * 272, 1024);
+	else
+		return DIV_ROUND_CLOSEST(fadc * 230, 1024);
+}
+
 static int ad7192_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
 			   int *val,
@@ -483,6 +587,10 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 		*val = st->fclk /
 			(st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		*val = ad7192_get_3db_filter_freq(st);
+		*val2 = 1000;
+		return IIO_VAL_FRACTIONAL;
 	}
 
 	return -EINVAL;
@@ -537,6 +645,9 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 		st->mode |= AD7192_MODE_RATE(div);
 		ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
 		break;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000);
+		break;
 	default:
 		ret = -EINVAL;
 	}
@@ -555,6 +666,8 @@ static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev,
 		return IIO_VAL_INT_PLUS_NANO;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
 	}
@@ -655,6 +768,8 @@ static int ad7192_channels_config(struct iio_dev *indio_dev)
 
 	for (i = 0; i < indio_dev->num_channels; i++) {
 		*chan = channels[i];
+		chan->info_mask_shared_by_all |=
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY);
 		if (chan->type != IIO_TEMP)
 			chan->info_mask_shared_by_type_available |=
 				BIT(IIO_CHAN_INFO_SCALE);
@@ -666,16 +781,10 @@ static int ad7192_channels_config(struct iio_dev *indio_dev)
 
 static int ad7192_probe(struct spi_device *spi)
 {
-	const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev);
 	struct ad7192_state *st;
 	struct iio_dev *indio_dev;
 	int ret, voltage_uv = 0;
 
-	if (!pdata) {
-		dev_err(&spi->dev, "no platform data?\n");
-		return -ENODEV;
-	}
-
 	if (!spi->irq) {
 		dev_err(&spi->dev, "no IRQ?\n");
 		return -ENODEV;
@@ -713,12 +822,10 @@ static int ad7192_probe(struct spi_device *spi)
 
 	voltage_uv = regulator_get_voltage(st->avdd);
 
-	if (pdata->vref_mv)
-		st->int_vref_mv = pdata->vref_mv;
-	else if (voltage_uv)
+	if (voltage_uv)
 		st->int_vref_mv = voltage_uv / 1000;
 	else
-		dev_warn(&spi->dev, "reference voltage undefined\n");
+		dev_err(&spi->dev, "Device tree error, reference voltage undefined\n");
 
 	spi_set_drvdata(spi, indio_dev);
 	st->devid = spi_get_device_id(spi)->driver_data;
diff --git a/drivers/staging/iio/adc/ad7192.h b/drivers/staging/iio/adc/ad7192.h
deleted file mode 100644
index f3669e1df084..000000000000
--- a/drivers/staging/iio/adc/ad7192.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * AD7190 AD7192 AD7195 SPI ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- */
-#ifndef IIO_ADC_AD7192_H_
-#define IIO_ADC_AD7192_H_
-
-/*
- * TODO: struct ad7192_platform_data needs to go into include/linux/iio
- */
-
-/**
- * struct ad7192_platform_data - platform/board specific information
- * @vref_mv:		the external reference voltage in millivolt
- * @clock_source_sel:	[0..3]
- *			0 External 4.92 MHz clock connected from MCLK1 to MCLK2
- *			1 External Clock applied to MCLK2
- *			2 Internal 4.92 MHz Clock not available at the MCLK2 pin
- *			3 Internal 4.92 MHz Clock available at the MCLK2 pin
- * @ext_clk_Hz:		the external clock frequency in Hz, if not set
- *			the driver uses the internal clock (16.776 MHz)
- * @refin2_en:		REFIN1/REFIN2 Reference Select (AD7190/2 only)
- * @rej60_en:		50/60Hz notch filter enable
- * @sinc3_en:		SINC3 filter enable (default SINC4)
- * @chop_en:		CHOP mode enable
- * @buf_en:		buffered input mode enable
- * @unipolar_en:	unipolar mode enable
- * @burnout_curr_en:	constant current generators on AIN(+|-) enable
- */
-
-struct ad7192_platform_data {
-	u16		vref_mv;
-};
-
-#endif /* IIO_ADC_AD7192_H_ */
diff --git a/tools/iio/.gitignore b/tools/iio/.gitignore
new file mode 100644
index 000000000000..3758202618bd
--- /dev/null
+++ b/tools/iio/.gitignore
@@ -0,0 +1,4 @@
+iio_event_monitor
+iio_generic_buffer
+lsiio
+include/