DeviceTree updates for 4.14:
- Convert more DT code to use of_property_read_* API.
- Improve DT overlay support when adding multiple overlays.
- Convert printk's to %pOF format specifiers. Most went via subsystem
trees, but picked up the remaining orphans.
- Correct unittests to use preferred "okay" for "status" property value.
- Add a KASLR seed property.
- Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa.
- Fix modalias buffer handling.
- Clean-up of include paths for building dtbs.
- Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices.
- Add nvmem bindings for MediaTek MT7623 and MT7622 SoC.
- Add compatible string for Allwinner H5 Mali-450 GPU.
- Fix links to old OpenFirmware docs with new mirror on devicetree.org.
- Remove status property from binding doc examples.
-----BEGIN PGP SIGNATURE-----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=IBAh
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"There's a few orphans in the conversion to %pOF printf specifiers
included here that no one else picked up.
Summary:
- Convert more DT code to use of_property_read_* API.
- Improve DT overlay support when adding multiple overlays
- Convert printk's to %pOF format specifiers. Most went via subsystem
trees, but picked up the remaining orphans
- Correct unittests to use preferred "okay" for "status" property
value
- Add a KASLR seed property
- Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa
- Fix modalias buffer handling
- Clean-up of include paths for building dtbs
- Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10
devices
- Add nvmem bindings for MediaTek MT7623 and MT7622 SoC
- Add compatible string for Allwinner H5 Mali-450 GPU
- Fix links to old OpenFirmware docs with new mirror on
devicetree.org
- Remove status property from binding doc examples"
* tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
devicetree: Adjust status "ok" -> "okay" under drivers/of/
dt-bindings: Remove "status" from examples
dt-bindings: pinctrl: sh-pfc: Use generic node name
dt-bindings: Add vendor Mellanox
dt-binding: net/phy: fix interrupts description
virt: Convert to using %pOF instead of full_name
macintosh: Convert to using %pOF instead of full_name
ide: pmac: Convert to using %pOF instead of full_name
microblaze: Convert to using %pOF instead of full_name
dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/
of: Use PLATFORM_DEVID_NONE definition
of/device: Fix of_device_get_modalias() buffer handling
of/device: Prevent buffer overflow in of_device_modalias()
dt-bindings: add amc6821, isl1208 trivial bindings
dt-bindings: add vendor prefix for Theobroma Systems
of: search scripts/dtc/include-prefixes path for both CPP and DTC
of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP
of: remove drivers/of/testcase-data from include search path for CPP
of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered
iio: srf08: add device tree binding for srf02 and srf10
...
hifive-unleashed-5.1
Linus Torvalds
commit
74fee4e88f
|
|
@ -108,6 +108,5 @@ Example:
|
|||
frame-number = <1>
|
||||
interrupts = <0 15 0x8>;
|
||||
reg = <0xf0003000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -183,7 +183,6 @@ cpm_syscon0: system-controller@440000 {
|
|||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&cpm_pinctrl 0 0 32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
|
|
|
|||
|
|
@ -57,7 +57,6 @@ Example:
|
|||
<0x0 0x1f227000 0x0 0x1000>;
|
||||
interrupts = <0x0 0x87 0x4>;
|
||||
dma-coherent;
|
||||
status = "ok";
|
||||
clocks = <&sataclk 0>;
|
||||
phys = <&phy2 0>;
|
||||
phy-names = "sata-phy";
|
||||
|
|
@ -72,7 +71,6 @@ Example:
|
|||
<0x0 0x1f237000 0x0 0x1000>;
|
||||
interrupts = <0x0 0x88 0x4>;
|
||||
dma-coherent;
|
||||
status = "ok";
|
||||
clocks = <&sataclk 0>;
|
||||
phys = <&phy3 0>;
|
||||
phy-names = "sata-phy";
|
||||
|
|
|
|||
|
|
@ -13,5 +13,4 @@ Example:
|
|||
reg = <0x83fe0000 0x4000>;
|
||||
interrupts = <70>;
|
||||
clocks = <&clks 161>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -227,7 +227,6 @@ See the example below, where a more complete device tree is shown:
|
|||
};
|
||||
|
||||
devbus-bootcs {
|
||||
status = "okay";
|
||||
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
|
||||
|
||||
/* NOR */
|
||||
|
|
@ -240,7 +239,6 @@ See the example below, where a more complete device tree is shown:
|
|||
|
||||
pcie-controller {
|
||||
compatible = "marvell,armada-xp-pcie";
|
||||
status = "okay";
|
||||
device_type = "pci";
|
||||
|
||||
#address-cells = <3>;
|
||||
|
|
@ -258,7 +256,6 @@ See the example below, where a more complete device tree is shown:
|
|||
|
||||
pcie@1,0 {
|
||||
/* Port 0, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -84,7 +84,6 @@ gmi@70090000 {
|
|||
reset-names = "gmi";
|
||||
ranges = <4 0 0xd0000000 0xfffffff>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
bus@4,0 {
|
||||
compatible = "simple-bus";
|
||||
|
|
@ -121,7 +120,6 @@ gmi@70090000 {
|
|||
reset-names = "gmi";
|
||||
ranges = <4 0 0xd0000000 0xfffffff>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
can@4,0 {
|
||||
reg = <4 0 0x100>;
|
||||
|
|
|
|||
|
|
@ -33,7 +33,6 @@ Example:
|
|||
#size-cells = <1>;
|
||||
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
child1 {
|
||||
...
|
||||
|
|
|
|||
|
|
@ -5,9 +5,31 @@ The chosen node does not represent a real device, but serves as a place
|
|||
for passing data between firmware and the operating system, like boot
|
||||
arguments. Data in the chosen node does not represent the hardware.
|
||||
|
||||
The following properties are recognized:
|
||||
|
||||
stdout-path property
|
||||
--------------------
|
||||
|
||||
kaslr-seed
|
||||
-----------
|
||||
|
||||
This property is used when booting with CONFIG_RANDOMIZE_BASE as the
|
||||
entropy used to randomize the kernel image base address location. Since
|
||||
it is used directly, this value is intended only for KASLR, and should
|
||||
not be used for other purposes (as it may leak information about KASLR
|
||||
offsets). It is parsed as a u64 value, e.g.
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
kaslr-seed = <0xfeedbeef 0xc0def00d>;
|
||||
};
|
||||
};
|
||||
|
||||
Note that if this property is set from UEFI (or a bootloader in EFI
|
||||
mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
|
||||
the Linux EFI stub (which will populate the property itself, using
|
||||
EFI_RNG_PROTOCOL).
|
||||
|
||||
stdout-path
|
||||
-----------
|
||||
|
||||
Device trees may specify the device to be used for boot console output
|
||||
with a stdout-path property under /chosen, as described in the Devicetree
|
||||
|
|
|
|||
|
|
@ -102,7 +102,6 @@ uart4: serial@80010000 {
|
|||
reg = <0x80010000 0x4000>;
|
||||
clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
|
||||
interrupts = <19>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
Clock consumer with only one, _AHB_ sink.
|
||||
|
|
|
|||
|
|
@ -41,5 +41,4 @@ Example: UART controller node that consumes the clock and reset generated
|
|||
interrupts = <0 90 1>;
|
||||
clocks = <&clkc_AO CLKID_AO_UART1>;
|
||||
resets = <&clkc_AO RESET_AO_UART1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock
|
|||
reg = <0xc81004c0 0x14>;
|
||||
interrupts = <0 90 1>;
|
||||
clocks = <&clkc CLKID_CLK81>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -39,5 +39,4 @@ Example: UART controller node that consumes the clock generated by the clock
|
|||
reg = <0xc81004c0 0x14>;
|
||||
interrupts = <0 90 1>;
|
||||
clocks = <&clkc CLKID_CLK81>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -46,7 +46,6 @@ Device tree example:
|
|||
|
||||
uart@3e002000 {
|
||||
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
|
||||
status = "disabled";
|
||||
reg = <0x3e002000 0x1000>;
|
||||
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
|
||||
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock
|
|||
clock-names = "uart", "clk_uart_baud0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -38,5 +38,4 @@ Examples:
|
|||
clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
|
||||
<&crg_ctrl HI3660_PCLK>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -27,5 +27,4 @@ Examples:
|
|||
interrupts = <0 49 4>;
|
||||
clocks = <&clock HIX5HD2_FIXED_83M>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -24,5 +24,4 @@ Examples:
|
|||
clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
|
||||
<&clks IMX21_CLK_PER1>;
|
||||
clock-names = "ipg", "per";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -67,5 +67,4 @@ auart0: serial@8006c000 {
|
|||
reg = <0x8006c000 0x2000>;
|
||||
interrupts = <24 25 23>;
|
||||
clocks = <&clks 32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -157,5 +157,4 @@ uart1: serial@43f90000 {
|
|||
interrupts = <45>;
|
||||
clocks = <&clks 79>, <&clks 50>;
|
||||
clock-names = "ipg", "per";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -24,5 +24,4 @@ Examples:
|
|||
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
|
||||
<&clks IMX27_CLK_PER1_GATE>;
|
||||
clock-names = "ipg", "per";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -90,5 +90,4 @@ auart0: serial@8006a000 {
|
|||
reg = <0x8006a000 0x2000>;
|
||||
interrupts = <112 70 71>;
|
||||
clocks = <&clks 45>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -87,5 +87,4 @@ uart1: serial@43f90000 {
|
|||
interrupts = <45>;
|
||||
clocks = <&clks 10>, <&clks 30>;
|
||||
clock-names = "ipg", "per";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -25,5 +25,4 @@ can1: can@53fc8000 {
|
|||
interrupts = <82>;
|
||||
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
|
||||
clock-names = "ipg", "per";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -27,5 +27,4 @@ uart1: serial@02020000 {
|
|||
interrupts = <0 26 0x04>;
|
||||
clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
|
||||
clock-names = "ipg", "per";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -66,7 +66,6 @@ clock@70110000 {
|
|||
#clock-cells = <0>;
|
||||
clock-output-names = "dfllCPU_out";
|
||||
vdd-cpu-supply = <&vdd_cpu>;
|
||||
status = "okay";
|
||||
|
||||
nvidia,sample-rate = <12500>;
|
||||
nvidia,droop-ctrl = <0x00000f00>;
|
||||
|
|
|
|||
|
|
@ -12,5 +12,4 @@ Examples:
|
|||
pxa2xx_clks: pxa2xx_clks@41300004 {
|
||||
compatible = "marvell,pxa-clocks";
|
||||
#clock-cells = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -81,5 +81,4 @@ Examples
|
|||
dma-names = "tx", "rx";
|
||||
power-domains = <&cpg>;
|
||||
resets = <&cpg 310>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -44,5 +44,4 @@ Examples
|
|||
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
|
||||
power-domains = <&cpg_clocks>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -50,5 +50,4 @@ Examples
|
|||
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&cpg_clocks>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
|
|||
interrupts = <1 23 3 4>, <1 23 4 4>;
|
||||
clock-names = "uart", "clk_uart_baud2";
|
||||
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock
|
|||
clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
|
||||
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
|
||||
<&clocks SCLK_UART>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -52,5 +52,4 @@ Example: UART controller node that consumes the clock generated by the clock
|
|||
"clk_uart_baud3";
|
||||
clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
|
||||
<&clocks SCLK_UART>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -73,5 +73,4 @@ Example: UART controller node that consumes the clock generated by the clock
|
|||
"clk_uart_baud3";
|
||||
clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
|
||||
<&clock SCLK_UART>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -74,5 +74,4 @@ Example: UART controller node that consumes the clock generated by the clock
|
|||
"clk_uart_baud1";
|
||||
clocks = <&clocks UART0>, <&clocks UART0>,
|
||||
<&clocks SCLK_UART0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -12,7 +12,11 @@ generators can be found in [1].
|
|||
==I2C device node==
|
||||
|
||||
Required properties:
|
||||
- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
|
||||
- compatible: shall be one of the following:
|
||||
"silabs,si5351a" - Si5351a, QFN20 package
|
||||
"silabs,si5351a-msop" - Si5351a, MSOP10 package
|
||||
"silabs,si5351b" - Si5351b, QFN20 package
|
||||
"silabs,si5351c" - Si5351c, QFN20 package
|
||||
- reg: i2c device address, shall be 0x60 or 0x61.
|
||||
- #clock-cells: from common clock binding; shall be set to 1.
|
||||
- clocks: from common clock binding; list of parent clock
|
||||
|
|
|
|||
|
|
@ -14,10 +14,9 @@ Required properties:
|
|||
- compatible: Must be "ti,k2g-sci-clk"
|
||||
- #clock-cells: Shall be 2.
|
||||
In clock consumers, this cell represents the device ID and clock ID
|
||||
exposed by the PM firmware. The assignments can be found in the header
|
||||
files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and
|
||||
<dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc>
|
||||
is the SoC involved, for example 'k2g'.
|
||||
exposed by the PM firmware. The list of valid values for the device IDs
|
||||
and clocks IDs for 66AK2G SoC are documented at
|
||||
http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
|
||||
|
||||
Examples:
|
||||
--------
|
||||
|
|
|
|||
|
|
@ -81,13 +81,11 @@ atl: atl@4843c000 {
|
|||
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
|
||||
clocks = <&atl_gfclk_mux>;
|
||||
clock-names = "fck";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
#include <dt-bindings/clk/ti-dra7-atl.h>
|
||||
|
||||
&atl {
|
||||
status = "okay";
|
||||
|
||||
atl2 {
|
||||
bws = <DRA7_ATL_WS_MCASP2_FSX>;
|
||||
|
|
|
|||
|
|
@ -31,5 +31,4 @@ uart0: serial@0x09405000 {
|
|||
reg = <0x09405000 0x1000>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&lsp1clk ZX296702_UART0_PCLK>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -34,5 +34,4 @@ usbphy0:usb-phy0 {
|
|||
#phy-cells = <0>;
|
||||
clocks = <&topclk USB20_PHY_CLK>;
|
||||
clock-names = "phyclk";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,5 +13,4 @@ dcp@80028000 {
|
|||
compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
|
||||
reg = <0x80028000 0x2000>;
|
||||
interrupts = <52 53>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -23,5 +23,4 @@ Example:
|
|||
interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
|
||||
"eip";
|
||||
clocks = <&cpm_syscon0 1 26>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -41,5 +41,4 @@ Examples:
|
|||
clock-names = "cesa0", "cesa1";
|
||||
marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>;
|
||||
marvell,crypto-sram-size = <0x600>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -29,5 +29,4 @@ Examples:
|
|||
interrupts = <22>;
|
||||
marvell,crypto-srams = <&crypto_sram>;
|
||||
marvell,crypto-sram-size = <0x600>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -25,5 +25,4 @@ Examples:
|
|||
clock-names = "aclk", "hclk", "sclk", "apb_pclk";
|
||||
resets = <&cru SRST_CRYPTO>;
|
||||
reset-names = "crypto-rst";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -15,5 +15,4 @@ Example:
|
|||
rockchip,pmu = <&pmugrf>;
|
||||
clocks = <&cru PCLK_DDR_MON>;
|
||||
clock-names = "pclk_ddr_mon";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -205,5 +205,4 @@ Example:
|
|||
rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
|
||||
rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
|
||||
rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -34,7 +34,6 @@ Example:
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fb>;
|
||||
display = <&display0>;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
|
|
|
|||
|
|
@ -23,7 +23,6 @@ Example:
|
|||
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
|
||||
clock-names = "periph_clk","sys_clk", "slow_clk";
|
||||
status = "disabled";
|
||||
|
||||
hlcdc-display-controller {
|
||||
compatible = "atmel,hlcdc-display-controller";
|
||||
|
|
|
|||
|
|
@ -33,7 +33,6 @@ stdp2690-ge-b850v3-fw required properties:
|
|||
Example:
|
||||
|
||||
&mux2_i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
stdp4028@73 {
|
||||
|
|
|
|||
|
|
@ -43,7 +43,6 @@ Example:
|
|||
clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
|
||||
clock-names = "iahb", "isfr";
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -14,5 +14,4 @@ timing-controller@4003d000 {
|
|||
reg = <0x4003d000 0x1000>;
|
||||
clocks = <&clks VF610_CLK_TCON0>;
|
||||
clock-names = "ipg";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -116,7 +116,7 @@ Parallel display support
|
|||
Required properties:
|
||||
- compatible: Should be "fsl,imx-parallel-display"
|
||||
Optional properties:
|
||||
- interface_pix_fmt: How this display is connected to the
|
||||
- interface-pix-fmt: How this display is connected to the
|
||||
display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
|
||||
and "lvds666".
|
||||
- edid: verbatim EDID data block describing attached display.
|
||||
|
|
|
|||
|
|
@ -23,7 +23,6 @@ Example:
|
|||
reg = <0x44000000 0x10000>;
|
||||
interrupts = <17>;
|
||||
clocks = <&clks CLK_LCD>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
lcdc_out: endpoint {
|
||||
|
|
|
|||
|
|
@ -18,6 +18,5 @@ Example:
|
|||
power-supply = <...>;
|
||||
backlight = <&backlight>;
|
||||
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -59,7 +59,6 @@ Example:
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&edp_hpd>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -46,7 +46,6 @@ hdmi: hdmi@ff980000 {
|
|||
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
|
||||
clock-names = "iahb", "isfr";
|
||||
status = "disabled";
|
||||
ports {
|
||||
hdmi_in: port {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -36,7 +36,6 @@ Example:
|
|||
resets = <&cru SRST_MIPIDSI0>;
|
||||
reset-names = "apb";
|
||||
rockchip,grf = <&grf>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
|
|
@ -65,6 +64,5 @@ Example:
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_en>;
|
||||
backlight = <&backlight>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@ hdmi: hdmi@20034000 {
|
|||
clock-names = "pclk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_ctl>;
|
||||
status = "disabled";
|
||||
|
||||
hdmi_in: port {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -28,6 +28,5 @@ chosen {
|
|||
allwinner,pipeline = "de_be0-lcd0-hdmi";
|
||||
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
|
||||
<&ahb_gates 44>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -278,7 +278,6 @@ hdmi: hdmi@01c16000 {
|
|||
<&dma SUN4I_DMA_NORMAL 16>,
|
||||
<&dma SUN4I_DMA_DEDICATED 24>;
|
||||
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -72,5 +72,4 @@ sai2: sai@40031000 {
|
|||
dma-names = "tx", "rx";
|
||||
dmas = <&edma0 0 21>,
|
||||
<&edma0 0 20>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -30,7 +30,6 @@ xor@d0060900 {
|
|||
reg = <0xd0060900 0x100
|
||||
0xd0060b00 0x100>;
|
||||
clocks = <&coreclk 0>;
|
||||
status = "okay";
|
||||
|
||||
xor00 {
|
||||
interrupts = <51>;
|
||||
|
|
|
|||
|
|
@ -48,7 +48,6 @@ Each dmas request consists of 3 cells:
|
|||
Example:
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "ok";
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
|
|
|
|||
|
|
@ -63,7 +63,6 @@ Example:
|
|||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xe0000000 0x1000>;
|
||||
interrupts = <0 35 0x4>;
|
||||
status = "disabled";
|
||||
dmas = <&dmahost 12 0 1>,
|
||||
<&dmahost 13 0 1 0>;
|
||||
dma-names = "rx", "rx";
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Example:
|
|||
|
||||
sti_uni_player2: sti-uni-player@2 {
|
||||
compatible = "st,sti-uni-player";
|
||||
status = "disabled";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
|
||||
|
|
|
|||
|
|
@ -135,5 +135,4 @@ Example:
|
|||
<&dma 13 0 0x0>; /* Logical - MemToDev */
|
||||
dma-names = "rx", "rx";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -40,7 +40,6 @@ Example:
|
|||
clock-names = "ahb", "mod";
|
||||
dmas = <&dma 1 29>, <&dma 1 28>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -62,7 +62,6 @@ uart1: serial@4806a000 {
|
|||
interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart1";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
/* Requesting crossbar input 49 and 50 */
|
||||
dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
|
||||
dma-names = "tx", "rx";
|
||||
|
|
|
|||
|
|
@ -102,7 +102,6 @@ mcasp0: mcasp@48038000 {
|
|||
reg-names = "mpu", "dat";
|
||||
interrupts = <80>, <81>;
|
||||
interrupt-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
/* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
|
||||
dmas = <&edma 8 2>,
|
||||
<&edma 9 2>;
|
||||
|
|
|
|||
|
|
@ -31,7 +31,6 @@ Example for full FPGA configuration:
|
|||
cell-index = <1>;
|
||||
interrupts = <92>;
|
||||
clocks = <&coreclk 0>;
|
||||
status = "okay";
|
||||
|
||||
fpga_mgr_spi: fpga-mgr@0 {
|
||||
compatible = "xlnx,fpga-slave-serial";
|
||||
|
|
|
|||
|
|
@ -23,7 +23,6 @@ gpio0: gpio@1100 {
|
|||
#gpio-cells = <2>;
|
||||
reg = <0x1100 0x080>;
|
||||
interrupts = <78 0x8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
Example of gpio-controller node for a ls2080a SoC:
|
||||
|
|
|
|||
|
|
@ -42,7 +42,6 @@ spics: spics@e0700000{
|
|||
|
||||
|
||||
spi0: spi@e0100000 {
|
||||
status = "okay";
|
||||
num-cs = <3>;
|
||||
cs-gpios = <&gpio1 7 0>, <&spics 0>,
|
||||
<&spics 1>;
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@ Required properties:
|
|||
* And, optionally, one of the vendor specific compatible:
|
||||
+ allwinner,sun4i-a10-mali
|
||||
+ allwinner,sun7i-a20-mali
|
||||
+ allwinner,sun50i-h5-mali
|
||||
+ amlogic,meson-gxbb-mali
|
||||
+ amlogic,meson-gxl-mali
|
||||
+ stericsson,db8500-mali
|
||||
|
|
@ -58,6 +59,10 @@ to specify one more vendor-specific compatible, among:
|
|||
Required properties:
|
||||
* resets: phandle to the reset line for the GPU
|
||||
|
||||
- allwinner,sun50i-h5-mali
|
||||
Required properties:
|
||||
* resets: phandle to the reset line for the GPU
|
||||
|
||||
- stericsson,db8500-mali
|
||||
Required properties:
|
||||
* interrupt-names and interrupts:
|
||||
|
|
|
|||
|
|
@ -51,7 +51,6 @@ Example for GK20A:
|
|||
resets = <&tegra_car 184>;
|
||||
reset-names = "gpu";
|
||||
iommus = <&mc TEGRA_SWGROUP_GPU>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
Example for GM20B:
|
||||
|
|
@ -70,7 +69,6 @@ Example for GM20B:
|
|||
resets = <&tegra_car 184>;
|
||||
reset-names = "gpu";
|
||||
iommus = <&mc TEGRA_SWGROUP_GPU>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
Example for GP10B:
|
||||
|
|
@ -89,5 +87,4 @@ Example for GP10B:
|
|||
reset-names = "gpu";
|
||||
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
|
||||
iommus = <&smmu TEGRA186_SID_GPU>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -24,5 +24,4 @@ Example:
|
|||
interrupts = <0 89 0>;
|
||||
clocks = <&clock 177>, <&clock 277>;
|
||||
clock-names = "sclk_fimg2d", "fimg2d";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -92,6 +92,5 @@ ssi-controller@48058000 {
|
|||
interrupts = <69>,
|
||||
<70>;
|
||||
|
||||
status = "disabled"; /* second port is not used on N900 */
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -102,7 +102,6 @@ And for clarification, here are the snipplets for the i2c-parents:
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
|
||||
&gpio5 5 GPIO_ACTIVE_HIGH /* scl */
|
||||
>;
|
||||
|
|
|
|||
|
|
@ -22,7 +22,6 @@ Example:
|
|||
interrupts = <9>;
|
||||
clocks = <&cmu clk_HFPERCLKI2C0>;
|
||||
clock-frequency = <100000>;
|
||||
status = "ok";
|
||||
energymicro,location = <3>;
|
||||
|
||||
eeprom@50 {
|
||||
|
|
|
|||
|
|
@ -71,5 +71,4 @@ Example:
|
|||
reset-names = "i2c";
|
||||
dmas = <&apbdma 16>, <&apbdma 16>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -37,5 +37,4 @@ For example:
|
|||
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
|
||||
clock-names = "tsc_clk";
|
||||
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -17,5 +17,4 @@ adc0: adc@400e3000 {
|
|||
clocks = <&ccu1 CLK_APB3_ADC0>;
|
||||
vref-supply = <®_vdda>;
|
||||
resets = <&rgu 40>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -16,5 +16,4 @@ dac: dac@400e1000 {
|
|||
clocks = <&ccu1 CLK_APB3_DAC>;
|
||||
vref-supply = <®_vdda>;
|
||||
resets = <&rgu 42>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -72,7 +72,6 @@ Example:
|
|||
/* Required Board specific properties */
|
||||
keypad,num-rows = <5>;
|
||||
keypad,num-columns = <5>;
|
||||
status = "okay";
|
||||
|
||||
linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
|
||||
MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
|
||||
|
|
|
|||
|
|
@ -43,7 +43,7 @@ haptics: haptics@5a {
|
|||
mode = <DRV260X_LRA_MODE>;
|
||||
library-sel = <DRV260X_LIB_LRA>;
|
||||
vib-rated-mv = <3200>;
|
||||
vib-overdriver-mv = <3200>;
|
||||
vib-overdrive-mv = <3200>;
|
||||
}
|
||||
|
||||
For more product information please see the link below:
|
||||
|
|
|
|||
|
|
@ -32,5 +32,4 @@ Example:
|
|||
pinctrl-1 = <&pinctrl_touchctrl_default>;
|
||||
pinctrl-2 = <&pinctrl_touchctrl_gpios>;
|
||||
vf50-ts-min-pressure = <200>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -35,5 +35,4 @@ Example:
|
|||
measure-delay-time = <0xfff>;
|
||||
pre-charge-time = <0xffff>;
|
||||
touchscreen-average-samples = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -24,7 +24,6 @@ Example:
|
|||
clock-frequency = <50000000>;
|
||||
clock-output-names = "qci_mclk";
|
||||
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -33,5 +33,4 @@ hdmicec: cec@100B0000 {
|
|||
hdmi-phandle = <&hdmi>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -166,7 +166,6 @@ Example:
|
|||
clock-output-names = "cam_a_clkout", "cam_b_clkout";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_port_a_clk_active>;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
|
|
@ -189,7 +188,6 @@ Example:
|
|||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11800000 0x1000>;
|
||||
interrupts = <0 85 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
csis_0: csis@11880000 {
|
||||
|
|
|
|||
|
|
@ -52,7 +52,6 @@ Example:
|
|||
|
||||
c8sectpfe@08a20000 {
|
||||
compatible = "st,stih407-c8sectpfe";
|
||||
status = "okay";
|
||||
reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
|
||||
reg-names = "stfe", "stfe-ram";
|
||||
interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
|
||||
|
|
|
|||
|
|
@ -59,7 +59,6 @@ I2C-connected TVP5147 decoder:
|
|||
tvp5147@5d {
|
||||
compatible = "ti,tvp5147";
|
||||
reg = <0x5d>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
composite_in: endpoint {
|
||||
|
|
|
|||
|
|
@ -130,7 +130,6 @@ The reg property implicitly specifies the chip select as this:
|
|||
Example:
|
||||
|
||||
devbus-bootcs@d0010400 {
|
||||
status = "okay";
|
||||
ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -12,7 +12,6 @@ Example:
|
|||
pmic@5b {
|
||||
compatible = "active-semi,act8945a";
|
||||
reg = <0x5b>;
|
||||
status = "okay";
|
||||
|
||||
active-semi,vsel-high;
|
||||
|
||||
|
|
@ -79,6 +78,5 @@ Example:
|
|||
active-semi,input-voltage-threshold-microvolt = <6600>;
|
||||
active-semi,precondition-timeout = <40>;
|
||||
active-semi,total-timeout = <3>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@ Example:
|
|||
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
|
||||
clock-names = "periph_clk","sys_clk", "slow_clk";
|
||||
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
status = "disabled";
|
||||
|
||||
hlcdc-display-controller {
|
||||
compatible = "atmel,hlcdc-display-controller";
|
||||
|
|
|
|||
|
|
@ -37,7 +37,6 @@ Sub-nodes:
|
|||
Examples:
|
||||
|
||||
i2c@63fc8000 { /* I2C1 */
|
||||
status = "okay";
|
||||
|
||||
pmic: dialog@48 {
|
||||
compatible = "dlg,da9053-aa";
|
||||
|
|
|
|||
|
|
@ -116,7 +116,6 @@ ecspi@70010000 { /* ECSPI1 */
|
|||
fsl,spi-num-chipselects = <2>;
|
||||
cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
|
||||
<&gpio4 25 0>; /* GPIO4_25 */
|
||||
status = "okay";
|
||||
|
||||
pmic: mc13892@0 {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -26,7 +26,6 @@ Example for i.MX23 SoC:
|
|||
compatible = "fsl,imx23-lradc";
|
||||
reg = <0x80050000 0x2000>;
|
||||
interrupts = <36 37 38 39 40 41 42 43 44>;
|
||||
status = "okay";
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
fsl,ave-ctrl = <4>;
|
||||
fsl,ave-delay = <2>;
|
||||
|
|
@ -39,7 +38,6 @@ Example for i.MX28 SoC:
|
|||
compatible = "fsl,imx28-lradc";
|
||||
reg = <0x80050000 0x2000>;
|
||||
interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
|
||||
status = "okay";
|
||||
fsl,lradc-touchscreen-wires = <5>;
|
||||
fsl,ave-ctrl = <4>;
|
||||
fsl,ave-delay = <2>;
|
||||
|
|
|
|||
|
|
@ -57,7 +57,6 @@ audio-subsystem {
|
|||
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial_3: serial@11460000 {
|
||||
|
|
@ -69,6 +68,5 @@ audio-subsystem {
|
|||
clock-names = "uart", "clk_uart_baud0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart_aud_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -47,5 +47,4 @@ ssc0: ssc@f0010000 {
|
|||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -74,5 +74,4 @@ Example:
|
|||
phys = <&emmc_phy>;
|
||||
phy-names = "phy_arasan";
|
||||
#clock-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue