redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge remote-tracking branch 'net-next/master' into mac80211-next 

Merging this brings in the timer_setup() change, which allows
me to apply Kees's mac80211 changes for it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
hifive-unleashed-5.1
Johannes Berg 2017-10-06 11:46:32 +02:00
parent 503c1fb98b cc71b7b071
commit 753d179ad0
1267 changed files with 36868 additions and 9302 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.mailmap
View File

@ -68,6 +68,8 @@ Jacob Shin <Jacob.Shin@amd.com>
James Bottomley <jejb@mulgrave.(none)>
James Bottomley <jejb@titanic.il.steeleye.com>
James E Wilson <wilson@specifix.com>
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
James Hogan <jhogan@kernel.org> <james@albanarts.com>
James Ketrenos <jketreno@io.(none)>
Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>

48
Documentation/ABI/testing/sysfs-bus-thunderbolt
View File

@ -110,3 +110,51 @@ Description: When new NVM image is written to the non-active NVM
is directly the status value from the DMA configuration
based mailbox before the device is power cycled. Writing
0 here clears the status.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/key
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains name of the property directory the XDomain
service exposes. This entry describes the protocol in
question. Following directories are already reserved by
the Apple XDomain specification:
network: IP/ethernet over Thunderbolt
targetdm: Target disk mode protocol over Thunderbolt
extdisp: External display mode protocol over Thunderbolt
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: Stores the same MODALIAS value emitted by uevent for
the XDomain service. Format: tbtsvc:kSpNvNrN
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain protocol identifier the XDomain
service supports.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain protocol version the XDomain
service supports.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain software version the XDomain
service supports.
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns
Date: Jan 2018
KernelVersion: 4.15
Contact: thunderbolt-software@lists.01.org
Description: This contains XDomain service specific settings as
bitmask. Format: %x

2
Documentation/ABI/testing/sysfs-power
View File

@ -127,7 +127,7 @@ Description:
What; /sys/power/pm_trace_dev_match
Date: October 2010
Contact: James Hogan <james@albanarts.com>
Contact: James Hogan <jhogan@kernel.org>
Description:
The /sys/power/pm_trace_dev_match file contains the name of the
device associated with the last PM event point saved in the RTC

24
Documentation/admin-guide/thunderbolt.rst
View File

@ -197,3 +197,27 @@ information is missing.
To recover from this mode, one needs to flash a valid NVM image to the
host host controller in the same way it is done in the previous chapter.
Networking over Thunderbolt cable
---------------------------------
Thunderbolt technology allows software communication across two hosts
connected by a Thunderbolt cable.
It is possible to tunnel any kind of traffic over Thunderbolt link but
currently we only support Apple ThunderboltIP protocol.
If the other host is running Windows or macOS only thing you need to
do is to connect Thunderbolt cable between the two hosts, the
``thunderbolt-net`` is loaded automatically. If the other host is also
Linux you should load ``thunderbolt-net`` manually on one host (it does
not matter which one)::
# modprobe thunderbolt-net
This triggers module load on the other host automatically. If the driver
is built-in to the kernel image, there is no need to do anything.
The driver will create one virtual ethernet interface per Thunderbolt
port which are named like ``thunderbolt0`` and so on. From this point
you can either use standard userspace tools like ``ifconfig`` to
configure the interface or let your GUI to handle it automatically.

12
Documentation/core-api/workqueue.rst
View File

@ -39,8 +39,8 @@ up.
Although MT wq wasted a lot of resource, the level of concurrency
provided was unsatisfactory. The limitation was common to both ST and
MT wq albeit less severe on MT. Each wq maintained its own separate
worker pool. A MT wq could provide only one execution context per CPU
while a ST wq one for the whole system. Work items had to compete for
worker pool. An MT wq could provide only one execution context per CPU
while an ST wq one for the whole system. Work items had to compete for
those very limited execution contexts leading to various problems
including proneness to deadlocks around the single execution context.
@ -151,7 +151,7 @@ Application Programming Interface (API)
``alloc_workqueue()`` allocates a wq. The original
``create_*workqueue()`` functions are deprecated and scheduled for
removal. ``alloc_workqueue()`` takes three arguments - @``name``,
removal. ``alloc_workqueue()`` takes three arguments - ``@name``,
``@flags`` and ``@max_active``. ``@name`` is the name of the wq and
also used as the name of the rescuer thread if there is one.
@ -197,7 +197,7 @@ resources, scheduled and executed.
served by worker threads with elevated nice level.
Note that normal and highpri worker-pools don't interact with
each other. Each maintain its separate pool of workers and
each other. Each maintains its separate pool of workers and
implements concurrency management among its workers.
``WQ_CPU_INTENSIVE``
@ -249,8 +249,8 @@ unbound worker-pools and only one work item could be active at any given
time thus achieving the same ordering property as ST wq.
In the current implementation the above configuration only guarantees
ST behavior within a given NUMA node. Instead alloc_ordered_queue should
be used to achieve system wide ST behavior.
ST behavior within a given NUMA node. Instead ``alloc_ordered_queue()`` should
be used to achieve system-wide ST behavior.
Example Execution Scenarios

2
Documentation/cpu-freq/index.txt
View File

@ -32,8 +32,6 @@ cpufreq-stats.txt - General description of sysfs cpufreq stats.
index.txt - File index, Mailing list and Links (this document)
intel-pstate.txt - Intel pstate cpufreq driver specific file.
pcc-cpufreq.txt - PCC cpufreq driver specific file.

1
Documentation/device-mapper/dm-raid.txt
View File

@ -344,3 +344,4 @@ Version History
(wrong raid10_copies/raid10_format sequence)
1.11.1 Add raid4/5/6 journal write-back support via journal_mode option
1.12.1 fix for MD deadlock between mddev_suspend() and md_write_start() available
1.13.0 Fix dev_health status at end of "recover" (was 'a', now 'A')

2
Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
View File

@ -32,7 +32,7 @@ Example:
compatible = "st,stm32h743-rcc", "st,stm32-rcc";
reg = <0x58024400 0x400>;
#reset-cells = <1>;
#clock-cells = <2>;
#clock-cells = <1>;
clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
st,syscfg = <&pwrcfg>;

28
Documentation/devicetree/bindings/leds/ams,as3645a.txt
View File

@ -15,11 +15,14 @@ Required properties
compatible : Must be "ams,as3645a".
reg : The I2C address of the device. Typically 0x30.
#address-cells : 1
#size-cells : 0
Required properties of the "flash" child node
=============================================
Required properties of the flash child node (0)
===============================================
reg: 0
flash-timeout-us: Flash timeout in microseconds. The value must be in
the range [100000, 850000] and divisible by 50000.
flash-max-microamp: Maximum flash current in microamperes. Has to be
@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The
and divisible by 50000.
Optional properties of the "flash" child node
=============================================
Optional properties of the flash child node
===========================================
label : The label of the flash LED.
Required properties of the "indicator" child node
=================================================
Required properties of the indicator child node (1)
===================================================
reg: 1
led-max-microamp: Maximum indicator current. The allowed values are
2500, 5000, 7500 and 10000.
Optional properties of the "indicator" child node
=================================================
Optional properties of the indicator child node
===============================================
label : The label of the indicator LED.
@ -55,16 +59,20 @@ Example
=======
as3645a@30 {
#address-cells: 1
#size-cells: 0
reg = <0x30>;
compatible = "ams,as3645a";
flash {
flash@0 {
reg = <0x0>;
flash-timeout-us = <150000>;
flash-max-microamp = <320000>;
led-max-microamp = <60000>;
ams,input-max-microamp = <1750000>;
label = "as3645a:flash";
};
indicator {
indicator@1 {
reg = <0x1>;
led-max-microamp = <10000>;
label = "as3645a:indicator";
};

10
Documentation/devicetree/bindings/net/marvell-pp2.txt
View File

@ -21,8 +21,9 @@ Required properties:
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and
"mg_clk" (the latter only for armada-7k-pp2).
- AXI clock (only for armada-7k-pp2)
- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
and "axi_clk" (the 2 latter only for armada-7k-pp2).
The ethernet ports are represented by subnodes. At least one port is
required.
@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2:
cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
clock-names = "pp_clk", "gop_clk", "gp_clk";
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
<&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,

1
Documentation/devicetree/bindings/net/rockchip-dwmac.txt
View File

@ -4,6 +4,7 @@ The device node has following properties.
Required properties:
- compatible: should be "rockchip,<name>-gamc"
"rockchip,rk3128-gmac": found on RK312x SoCs
"rockchip,rk3228-gmac": found on RK322x SoCs
"rockchip,rk3288-gmac": found on RK3288 SoCs
"rockchip,rk3328-gmac": found on RK3328 SoCs

28
Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt 100644
View File

@ -0,0 +1,28 @@
Binding for the Synopsys HSDK reset controller
This binding uses the common reset binding[1].
[1] Documentation/devicetree/bindings/reset/reset.txt
Required properties:
- compatible: should be "snps,hsdk-reset".
- reg: should always contain 2 pairs address - length: first for reset
configuration register and second for corresponding SW reset and status bits
register.
- #reset-cells: from common reset binding; Should always be set to 1.
Example:
reset: reset@880 {
compatible = "snps,hsdk-reset";
#reset-cells = <1>;
reg = <0x8A0 0x4>, <0xFF0 0x4>;
};
Specifying reset lines connected to IP modules:
ethernet@.... {
....
resets = <&reset HSDK_V1_ETH_RESET>;
....
};
The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>

6
Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
View File

@ -8,6 +8,12 @@ Required properties:
the firmware event log
- linux,sml-size : size of the memory allocated for the firmware event log
Optional properties:
- powered-while-suspended: present when the TPM is left powered on between
suspend and resume (makes the suspend/resume
callbacks do nothing).
Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
----------------------------------------------------------

2
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
View File

@ -41,6 +41,8 @@ Required properties:
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
- "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
- "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
- "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
- "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
- "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.

2
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -3,8 +3,8 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order.
This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
abcn Abracon Corporation
abilis Abilis Systems
abracon Abracon Corporation
actions Actions Semiconductor Co., Ltd.
active-semi Active-Semi International Inc
ad Avionic Design GmbH

2
Documentation/driver-api/pm/devices.rst
View File

@ -675,7 +675,7 @@ sub-domain of the parent domain.
Support for power domains is provided through the :c:member:`pm_domain` field of
|struct device|. This field is a pointer to an object of type
|struct dev_pm_domain|, defined in :file:`include/linux/pm.h``, providing a set
|struct dev_pm_domain|, defined in :file:`include/linux/pm.h`, providing a set
of power management callbacks analogous to the subsystem-level and device driver
callbacks that are executed for the given device during all power transitions,
instead of the respective subsystem-level callbacks. Specifically, if a

7
Documentation/driver-model/driver.txt
View File

@ -196,12 +196,13 @@ struct driver_attribute {
};
Device drivers can export attributes via their sysfs directories.
Drivers can declare attributes using a DRIVER_ATTR macro that works
identically to the DEVICE_ATTR macro.
Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO
macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO
macros.
Example:
DRIVER_ATTR(debug,0644,show_debug,store_debug);
DRIVER_ATTR_RW(debug);
This is equivalent to declaring:

5
Documentation/filesystems/cifs/AUTHORS
View File

@ -41,6 +41,11 @@ Igor Mammedov (DFS support)
Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code)
Scott Lovenberg
Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features)
Aurelien Aptel (for DFS SMB3 work and some key bug fixes)
Ronnie Sahlberg (for SMB3 xattr work and bug fixes)
Shirish Pargaonkar (for many ACL patches over the years)
Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security)
Test case and Bug Report contributors
-------------------------------------

81
Documentation/filesystems/cifs/README
View File

@ -1,10 +1,14 @@
The CIFS VFS support for Linux supports many advanced network filesystem
features such as hierarchical dfs like namespace, hardlinks, locking and more.
This module supports the SMB3 family of advanced network protocols (as well
as older dialects, originally called "CIFS" or SMB1).
The CIFS VFS module for Linux supports many advanced network filesystem
features such as hierarchical DFS like namespace, hardlinks, locking and more.
It was designed to comply with the SNIA CIFS Technical Reference (which
supersedes the 1992 X/Open SMB Standard) as well as to perform best practice
practical interoperability with Windows 2000, Windows XP, Samba and equivalent
servers. This code was developed in participation with the Protocol Freedom
Information Foundation.
Information Foundation. CIFS and now SMB3 has now become a defacto
standard for interoperating between Macs and Windows and major NAS appliances.
Please see
http://protocolfreedom.org/ and
@ -15,30 +19,11 @@ for more details.
For questions or bug reports please contact:
sfrench@samba.org (sfrench@us.ibm.com)
See the project page at: https://wiki.samba.org/index.php/LinuxCIFS_utils
Build instructions:
==================
For Linux 2.4:
1) Get the kernel source (e.g.from http://www.kernel.org)
and download the cifs vfs source (see the project page
at http://us1.samba.org/samba/Linux_CIFS_client.html)
and change directory into the top of the kernel directory
then patch the kernel (e.g. "patch -p1 < cifs_24.patch")
to add the cifs vfs to your kernel configure options if
it has not already been added (e.g. current SuSE and UL
users do not need to apply the cifs_24.patch since the cifs vfs is
already in the kernel configure menu) and then
mkdir linux/fs/cifs and then copy the current cifs vfs files from
the cifs download to your kernel build directory e.g.
cp <cifs_download_dir>/fs/cifs/* to <kernel_download_dir>/fs/cifs
2) make menuconfig (or make xconfig)
3) select cifs from within the network filesystem choices
4) save and exit
5) make dep
6) make modules (or "make" if CIFS VFS not to be built as a module)
For Linux 2.6:
For Linux:
1) Download the kernel (e.g. from http://www.kernel.org)
and change directory into the top of the kernel directory tree
(e.g. /usr/src/linux-2.5.73)
@ -61,16 +46,13 @@ would simply type "make install").
If you do not have the utility mount.cifs (in the Samba 3.0 source tree and on
the CIFS VFS web site) copy it to the same directory in which mount.smbfs and
similar files reside (usually /sbin). Although the helper software is not
required, mount.cifs is recommended. Eventually the Samba 3.0 utility program
"net" may also be helpful since it may someday provide easier mount syntax for
users who are used to Windows e.g.
net use <mount point> <UNC name or cifs URL>
required, mount.cifs is recommended. Most distros include a "cifs-utils"
package that includes this utility so it is recommended to install this.
Note that running the Winbind pam/nss module (logon service) on all of your
Linux clients is useful in mapping Uids and Gids consistently across the
domain to the proper network user. The mount.cifs mount helper can be
trivially built from Samba 3.0 or later source e.g. by executing:
gcc samba/source/client/mount.cifs.c -o mount.cifs
found at cifs-utils.git on git.samba.org
If cifs is built as a module, then the size and number of network buffers
and maximum number of simultaneous requests to one server can be configured.
@ -79,6 +61,18 @@ Changing these from their defaults is not recommended. By executing modinfo
on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made
at module initialization time (by running insmod cifs.ko) can be seen.
Recommendations
===============
To improve security the SMB2.1 dialect or later (usually will get SMB3) is now
the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0"
on mount (or vers=2.0 for Windows Vista). Note that the CIFS (vers=1.0) is
much older and less secure than the default dialect SMB3 which includes
many advanced security features such as downgrade attack detection
and encrypted shares and stronger signing and authentication algorithms.
There are additional mount options that may be helpful for SMB3 to get
improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1):
"mfsymlinks" and "cifsacl" and "idsfromsid"
Allowing User Mounts
====================
To permit users to mount and unmount over directories they own is possible
@ -98,9 +92,7 @@ and execution of suid programs on the remote target would be enabled
by default. This can be changed, as with nfs and other filesystems,
by simply specifying "nosuid" among the mount options. For user mounts
though to be able to pass the suid flag to mount requires rebuilding
mount.cifs with the following flag:
gcc samba/source/client/mount.cifs.c -DCIFS_ALLOW_USR_SUID -o mount.cifs
mount.cifs with the following flag: CIFS_ALLOW_USR_SUID
There is a corresponding manual page for cifs mounting in the Samba 3.0 and
later source tree in docs/manpages/mount.cifs.8
@ -189,18 +181,18 @@ applications running on the same server as Samba.
Use instructions:
================
Once the CIFS VFS support is built into the kernel or installed as a module
(cifs.o), you can use mount syntax like the following to access Samba or Windows
servers:
(cifs.ko), you can use mount syntax like the following to access Samba or
Mac or Windows servers:
mount -t cifs //9.53.216.11/e$ /mnt -o user=myname,pass=mypassword
mount -t cifs //9.53.216.11/e$ /mnt -o username=myname,password=mypassword
Before -o the option -v may be specified to make the mount.cifs
mount helper display the mount steps more verbosely.
After -o the following commonly used cifs vfs specific options
are supported:
user=<username>
pass=<password>
username=<username>
password=<password>
domain=<domain name>
Other cifs mount options are described below. Use of TCP names (in addition to
@ -246,13 +238,16 @@ the Server's registry. Samba starting with version 3.10 will allow such
filenames (ie those which contain valid Linux characters, which normally
would be forbidden for Windows/CIFS semantics) as long as the server is
configured for Unix Extensions (and the client has not disabled
/proc/fs/cifs/LinuxExtensionsEnabled).
/proc/fs/cifs/LinuxExtensionsEnabled). In addition the mount option
"mapposix" can be used on CIFS (vers=1.0) to force the mapping of
illegal Windows/NTFS/SMB characters to a remap range (this mount parm
is the default for SMB3). This remap ("mapposix") range is also
compatible with Mac (and "Services for Mac" on some older Windows).
CIFS VFS Mount Options
======================
A partial list of the supported mount options follows:
user The user name to use when trying to establish
username The user name to use when trying to establish
the CIFS session.
password The user password. If the mount helper is
installed, the user will be prompted for password

72
Documentation/filesystems/cifs/TODO
View File

@ -1,4 +1,4 @@
Version 2.03 August 1, 2014
Version 2.04 September 13, 2017
A Partial List of Missing Features
==================================
@ -8,73 +8,69 @@ for visible, important contributions to this module. Here
is a partial list of the known problems and missing features:
a) SMB3 (and SMB3.02) missing optional features:
- RDMA
- RDMA (started)
- multichannel (started)
- directory leases (improved metadata caching)
- T10 copy offload (copy chunk is only mechanism supported)
- encrypted shares
b) improved sparse file support
c) Directory entry caching relies on a 1 second timer, rather than
using FindNotify or equivalent. - (started)
using Directory Leases
d) quota support (needs minor kernel change since quota calls
to make it to network filesystems or deviceless filesystems)
e) improve support for very old servers (OS/2 and Win9x for example)
Including support for changing the time remotely (utimes command).
e) Better optimize open to reduce redundant opens (using reference
counts more) and to improve use of compounding in SMB3 to reduce
number of roundtrips.
f) hook lower into the sockets api (as NFS/SunRPC does) to avoid the
extra copy in/out of the socket buffers in some cases.
g) Better optimize open (and pathbased setfilesize) to reduce the
oplock breaks coming from windows srv. Piggyback identical file
opens on top of each other by incrementing reference count rather
than resending (helps reduce server resource utilization and avoid
spurious oplock breaks).
h) Add support for storing symlink info to Windows servers
in the Extended Attribute format their SFU clients would recognize.
i) Finish inotify support so kde and gnome file list windows
f) Finish inotify support so kde and gnome file list windows
will autorefresh (partially complete by Asser). Needs minor kernel
vfs change to support removing D_NOTIFY on a file.
j) Add GUI tool to configure /proc/fs/cifs settings and for display of
g) Add GUI tool to configure /proc/fs/cifs settings and for display of
the CIFS statistics (started)
k) implement support for security and trusted categories of xattrs
h) implement support for security and trusted categories of xattrs
(requires minor protocol extension) to enable better support for SELINUX
l) Implement O_DIRECT flag on open (already supported on mount)
i) Implement O_DIRECT flag on open (already supported on mount)
m) Create UID mapping facility so server UIDs can be mapped on a per
j) Create UID mapping facility so server UIDs can be mapped on a per
mount or a per server basis to client UIDs or nobody if no mapping
exists. This is helpful when Unix extensions are negotiated to
allow better permission checking when UIDs differ on the server
and client. Add new protocol request to the CIFS protocol
standard for asking the server for the corresponding name of a
particular uid.
exists. Also better integration with winbind for resolving SID owners
n) DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too)
k) Add tools to take advantage of more smb3 specific ioctls and features
o) mount check for unmatched uids
l) encrypted file support
p) Add support for new vfs entry point for fallocate
m) improved stats gathering, tools (perhaps integration with nfsometer?)
q) Add tools to take advantage of cifs/smb3 specific ioctls and features
such as "CopyChunk" (fast server side file copy)
n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed
file attribute via chflags) and improve user space tools for managing and
viewing them.
r) encrypted file support
o) mount helper GUI (to simplify the various configuration options on mount)
s) improved stats gathering, tools (perhaps integration with nfsometer?)
p) autonegotiation of dialects (offering more than one dialect ie SMB3.02,
SMB3, SMB2.1 not just SMB3).
t) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed
file attribute via chflags)
q) Allow mount.cifs to be more verbose in reporting errors with dialect
or unsupported feature errors.
u) mount helper GUI (to simplify the various configuration options on mount)
r) updating cifs documentation, and user guid.
s) Addressing bugs found by running a broader set of xfstests in standard
file system xfstest suite.
t) split cifs and smb3 support into separate modules so legacy (and less
secure) CIFS dialect can be disabled in environments that don't need it
and simplify the code.
u) Finish up SMB3.1.1 dialect support
v) POSIX Extensions for SMB3.1.1
KNOWN BUGS
====================================

24
Documentation/filesystems/cifs/cifs.txt
View File

@ -1,24 +1,28 @@
This is the client VFS module for the Common Internet File System
(CIFS) protocol which is the successor to the Server Message Block
This is the client VFS module for the SMB3 NAS protocol as well
older dialects such as the Common Internet File System (CIFS)
protocol which was the successor to the Server Message Block
(SMB) protocol, the native file sharing mechanism for most early
PC operating systems. New and improved versions of CIFS are now
called SMB2 and SMB3. These dialects are also supported by the
CIFS VFS module. CIFS is fully supported by network
file servers such as Windows 2000, 2003, 2008 and 2012
file servers such as Windows 2000, 2003, 2008, 2012 and 2016
as well by Samba (which provides excellent CIFS
server support for Linux and many other operating systems), so
server support for Linux and many other operating systems), Apple
systems, as well as most Network Attached Storage vendors, so
this network filesystem client can mount to a wide variety of
servers.
The intent of this module is to provide the most advanced network
file system function for CIFS compliant servers, including better
POSIX compliance, secure per-user session establishment, high
performance safe distributed caching (oplock), optional packet
file system function for SMB3 compliant servers, including advanced
security features, excellent parallelized high performance i/o, better
POSIX compliance, secure per-user session establishment, encryption,
high performance safe distributed caching (leases/oplocks), optional packet
signing, large files, Unicode support and other internationalization
improvements. Since both Samba server and this filesystem client support
the CIFS Unix extensions, the combination can provide a reasonable
alternative to NFSv4 for fileserving in some Linux to Linux environments,
not just in Linux to Windows environments.
the CIFS Unix extensions (and in the future SMB3 POSIX extensions),
the combination can provide a reasonable alternative to other network and
cluster file systems for fileserving in some Linux to Linux environments,
not just in Linux to Windows (or Linux to Mac) environments.
This filesystem has an mount utility (mount.cifs) that can be obtained from

3
Documentation/filesystems/sysfs.txt
View File

@ -366,7 +366,8 @@ struct driver_attribute {
Declaring:
DRIVER_ATTR(_name, _mode, _show, _store)
DRIVER_ATTR_RO(_name)
DRIVER_ATTR_RW(_name)
Creation/Removal:

2
Documentation/networking/filter.txt
View File

@ -337,7 +337,7 @@ Examples for low-level BPF:
jeq #14, good /* __NR_rt_sigprocmask */
jeq #13, good /* __NR_rt_sigaction */
jeq #35, good /* __NR_nanosleep */
bad: ret #0 /* SECCOMP_RET_KILL */
bad: ret #0 /* SECCOMP_RET_KILL_THREAD */
good: ret #0x7fff0000 /* SECCOMP_RET_ALLOW */
The above example code can be placed into a file (here called "foo"), and

18
Documentation/networking/ip-sysctl.txt
View File

@ -1680,6 +1680,9 @@ accept_dad - INTEGER
2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
link-local address has been found.
DAD operation and mode on a given interface will be selected according
to the maximum value of conf/{all,interface}/accept_dad.
force_tllao - BOOLEAN
Enable sending the target link-layer address option even when
responding to a unicast neighbor solicitation.
@ -1727,16 +1730,23 @@ suppress_frag_ndisc - INTEGER
optimistic_dad - BOOLEAN
Whether to perform Optimistic Duplicate Address Detection (RFC 4429).
0: disabled (default)
1: enabled
0: disabled (default)
1: enabled
Optimistic Duplicate Address Detection for the interface will be enabled
if at least one of conf/{all,interface}/optimistic_dad is set to 1,
it will be disabled otherwise.
use_optimistic - BOOLEAN
If enabled, do not classify optimistic addresses as deprecated during
source address selection. Preferred addresses will still be chosen
before optimistic addresses, subject to other ranking in the source
address selection algorithm.
0: disabled (default)
1: enabled
0: disabled (default)
1: enabled
This will be enabled if at least one of
conf/{all,interface}/use_optimistic is set to 1, disabled otherwise.
stable_secret - IPv6 address
This IPv6 address will be used as a secret to generate IPv6

64
Documentation/networking/switchdev.txt
View File

@ -13,42 +13,42 @@ an example setup using a data-center-class switch ASIC chip. Other setups
with SR-IOV or soft switches, such as OVS, are possible.
                             User-space tools
User-space tools
       user space                   |
      +-------------------------------------------------------------------+
       kernel                       | Netlink
                                    |
                     +--------------+-------------------------------+
                     |         Network stack                        |
                     |           (Linux)                            |
                     |                                              |
                     +----------------------------------------------+
user space |
+-------------------------------------------------------------------+
kernel | Netlink
|
+--------------+-------------------------------+
| Network stack |
| (Linux) |
| |
+----------------------------------------------+
sw1p2 sw1p4 sw1p6
                      sw1p1  + sw1p3 +  sw1p5 +         eth1
                        +    |    +    |    +    |            +
                        |    |    |    |    |    |            |
                     +--+----+----+----+-+--+----+---+  +-----+-----+
                     |         Switch driver         |  |    mgmt   |
                     |        (this document)        |  |   driver  |
                     |                               |  |           |
                     +--------------+----------------+  +-----------+
                                    |
       kernel                       | HW bus (eg PCI)
      +-------------------------------------------------------------------+
       hardware                     |
                     +--------------+---+------------+
                     |         Switch device (sw1)   |
                     |  +----+                       +--------+
                     |  |    v offloaded data path   | mgmt port
                     |  |    |                       |
                     +--|----|----+----+----+----+---+
                        |    |    |    |    |    |
                        +    +    +    +    +    +
                       p1   p2   p3   p4   p5   p6
sw1p1 + sw1p3 + sw1p5 + eth1
+ | + | + | +
| | | | | | |
+--+----+----+----+----+----+---+ +-----+-----+
| Switch driver | | mgmt |
| (this document) | | driver |
| | | |
+--------------+----------------+ +-----------+
|
kernel | HW bus (eg PCI)
+-------------------------------------------------------------------+
hardware |
+--------------+----------------+
| Switch device (sw1) |
| +----+ +--------+
| | v offloaded data path | mgmt port
| | | |
+--|----|----+----+----+----+---+
| | | | | |
+ + + + + +
p1 p2 p3 p4 p5 p6
                             front-panel ports
front-panel ports
Fig 1.

1
Documentation/sysctl/kernel.txt
View File

@ -75,6 +75,7 @@ show up in /proc/sys/kernel:
- reboot-cmd [ SPARC only ]
- rtsig-max
- rtsig-nr
- seccomp/ ==> Documentation/userspace-api/seccomp_filter.rst
- sem
- sem_next_id [ sysv ipc ]
- sg-big-buff [ generic SCSI device (sg) ]

52
Documentation/userspace-api/seccomp_filter.rst
View File

@ -87,11 +87,16 @@ Return values
A seccomp filter may return any of the following values. If multiple
filters exist, the return value for the evaluation of a given system
call will always use the highest precedent value. (For example,
``SECCOMP_RET_KILL`` will always take precedence.)
``SECCOMP_RET_KILL_PROCESS`` will always take precedence.)
In precedence order, they are:
``SECCOMP_RET_KILL``:
``SECCOMP_RET_KILL_PROCESS``:
Results in the entire process exiting immediately without executing
the system call. The exit status of the task (``status & 0x7f``)
will be ``SIGSYS``, not ``SIGKILL``.
``SECCOMP_RET_KILL_THREAD``:
Results in the task exiting immediately without executing the
system call. The exit status of the task (``status & 0x7f``) will
be ``SIGSYS``, not ``SIGKILL``.
@ -141,6 +146,15 @@ In precedence order, they are:
allow use of ptrace, even of other sandboxed processes, without
extreme care; ptracers can use this mechanism to escape.)
``SECCOMP_RET_LOG``:
Results in the system call being executed after it is logged. This
should be used by application developers to learn which syscalls their
application needs without having to iterate through multiple test and
development cycles to build the list.
This action will only be logged if "log" is present in the
actions_logged sysctl string.
``SECCOMP_RET_ALLOW``:
Results in the system call being executed.
@ -169,7 +183,41 @@ The ``samples/seccomp/`` directory contains both an x86-specific example
and a more generic example of a higher level macro interface for BPF
program generation.
Sysctls
=======
Seccomp's sysctl files can be found in the ``/proc/sys/kernel/seccomp/``
directory. Here's a description of each file in that directory:
``actions_avail``:
A read-only ordered list of seccomp return values (refer to the
``SECCOMP_RET_*`` macros above) in string form. The ordering, from
left-to-right, is the least permissive return value to the most
permissive return value.
The list represents the set of seccomp return values supported
by the kernel. A userspace program may use this list to
determine if the actions found in the ``seccomp.h``, when the
program was built, differs from the set of actions actually
supported in the current running kernel.
``actions_logged``:
A read-write ordered list of seccomp return values (refer to the
``SECCOMP_RET_*`` macros above) that are allowed to be logged. Writes
to the file do not need to be in ordered form but reads from the file
will be ordered in the same way as the actions_avail sysctl.
It is important to note that the value of ``actions_logged`` does not
prevent certain actions from being logged when the audit subsystem is
configured to audit a task. If the action is not found in
``actions_logged`` list, the final decision on whether to audit the
action for that task is ultimately left up to the audit subsystem to
decide for all seccomp return values other than ``SECCOMP_RET_ALLOW``.
The ``allow`` string is not accepted in the ``actions_logged`` sysctl
as it is not possible to log ``SECCOMP_RET_ALLOW`` actions. Attempting
to write ``allow`` to the sysctl will result in an EINVAL being
returned.
Adding architecture support
===========================

57
MAINTAINERS
View File

@ -352,6 +352,18 @@ L: linux-acpi@vger.kernel.org
S: Maintained
F: drivers/acpi/arm64
ACPI PMIC DRIVERS
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
M: Len Brown <lenb@kernel.org>
R: Andy Shevchenko <andy@infradead.org>
R: Mika Westerberg <mika.westerberg@linux.intel.com>
L: linux-acpi@vger.kernel.org
Q: https://patchwork.kernel.org/project/linux-acpi/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
B: https://bugzilla.kernel.org
S: Supported
F: drivers/acpi/pmic/
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
@ -2713,7 +2725,7 @@ F: net/core/filter.c
F: net/sched/act_bpf.c
F: net/sched/cls_bpf.c
F: samples/bpf/
F: tools/net/bpf*
F: tools/bpf/
F: tools/testing/selftests/bpf/
BROADCOM B44 10/100 ETHERNET DRIVER
@ -2853,7 +2865,6 @@ S: Supported
F: drivers/scsi/bnx2i/
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
M: Yuval Mintz <Yuval.Mintz@cavium.com>
M: Ariel Elior <ariel.elior@cavium.com>
M: everest-linux-l2@cavium.com
L: netdev@vger.kernel.org
@ -6643,8 +6654,8 @@ M: Alexander Aring <alex.aring@gmail.com>
M: Stefan Schmidt <stefan@osg.samsung.com>
L: linux-wpan@vger.kernel.org
W: http://wpan.cakelab.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next.git
S: Maintained
F: net/ieee802154/
F: net/mac802154/
@ -6727,7 +6738,7 @@ F: Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
F: drivers/auxdisplay/img-ascii-lcd.c
IMGTEC IR DECODER DRIVER
M: James Hogan <james.hogan@imgtec.com>
M: James Hogan <jhogan@kernel.org>
S: Maintained
F: drivers/media/rc/img-ir/
@ -7551,7 +7562,7 @@ F: arch/arm64/include/asm/kvm*
F: arch/arm64/kvm/
KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
M: James Hogan <james.hogan@imgtec.com>
M: James Hogan <jhogan@kernel.org>
L: linux-mips@linux-mips.org
S: Supported
F: arch/mips/include/uapi/asm/kvm*
@ -8253,6 +8264,12 @@ L: libertas-dev@lists.infradead.org
S: Orphan
F: drivers/net/wireless/marvell/libertas/
MARVELL MACCHIATOBIN SUPPORT
M: Russell King <rmk@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
MARVELL MV643XX ETHERNET DRIVER
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: netdev@vger.kernel.org
@ -8586,6 +8603,12 @@ M: Sean Wang <sean.wang@mediatek.com>
S: Maintained
F: drivers/media/rc/mtk-cir.c
MEDIATEK PMIC LED DRIVER
M: Sean Wang <sean.wang@mediatek.com>
S: Maintained
F: drivers/leds/leds-mt6323.c
F: Documentation/devicetree/bindings/leds/leds-mt6323.txt
MEDIATEK ETHERNET DRIVER
M: Felix Fietkau <nbd@openwrt.org>
M: John Crispin <john@phrozen.org>
@ -8868,7 +8891,7 @@ F: Documentation/devicetree/bindings/media/meson-ao-cec.txt
T: git git://linuxtv.org/media_tree.git
METAG ARCHITECTURE
M: James Hogan <james.hogan@imgtec.com>
M: James Hogan <jhogan@kernel.org>
L: linux-metag@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag.git
S: Odd Fixes
@ -9405,7 +9428,6 @@ F: include/uapi/linux/in.h
F: include/uapi/linux/net.h
F: include/uapi/linux/netdevice.h
F: include/uapi/linux/net_namespace.h
F: tools/net/
F: tools/testing/selftests/net/
F: lib/random32.c
@ -11047,7 +11069,6 @@ S: Supported
F: drivers/scsi/qedi/
QLOGIC QL4xxx ETHERNET DRIVER
M: Yuval Mintz <Yuval.Mintz@cavium.com>
M: Ariel Elior <Ariel.Elior@cavium.com>
M: everest-linux-l2@cavium.com
L: netdev@vger.kernel.org
@ -12915,9 +12936,9 @@ F: drivers/mmc/host/dw_mmc*
SYNOPSYS HSDK RESET CONTROLLER DRIVER
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Supported
F: drivers/reset/reset-hsdk-v1.c
F: include/dt-bindings/reset/snps,hsdk-v1-reset.h
F: Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
F: drivers/reset/reset-hsdk.c
F: include/dt-bindings/reset/snps,hsdk-reset.h
F: Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
SYSTEM CONFIGURATION (SYSCON)
M: Lee Jones <lee.jones@linaro.org>
@ -13268,6 +13289,15 @@ M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Yehezkel Bernat <yehezkel.bernat@intel.com>
S: Maintained
F: drivers/thunderbolt/
F: include/linux/thunderbolt.h
THUNDERBOLT NETWORK DRIVER
M: Michael Jamet <michael.jamet@intel.com>
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Yehezkel Bernat <yehezkel.bernat@intel.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/thunderbolt.c
THUNDERX GPIO DRIVER
M: David Daney <david.daney@cavium.com>
@ -14256,12 +14286,15 @@ S: Maintained
F: include/linux/virtio_vsock.h
F: include/uapi/linux/virtio_vsock.h
F: include/uapi/linux/vsockmon.h
F: include/uapi/linux/vm_sockets_diag.h
F: net/vmw_vsock/diag.c
F: net/vmw_vsock/af_vsock_tap.c
F: net/vmw_vsock/virtio_transport_common.c
F: net/vmw_vsock/virtio_transport.c
F: drivers/net/vsockmon.c
F: drivers/vhost/vsock.c
F: drivers/vhost/vsock.h
F: tools/testing/vsock/
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit@kernel.org>

6
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 14
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc3
NAME = Fearless Coyote
# *DOCUMENTATION*
@ -1172,11 +1172,11 @@ headers_check: headers_install
PHONY += kselftest
kselftest:
$(Q)$(MAKE) -C tools/testing/selftests run_tests
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
PHONY += kselftest-clean
kselftest-clean:
$(Q)$(MAKE) -C tools/testing/selftests clean
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests clean
PHONY += kselftest-merge
kselftest-merge:

1
arch/alpha/include/asm/mmu_context.h
View File

@ -8,6 +8,7 @@
*/
#include <linux/mm_types.h>
#include <linux/sched.h>
#include <asm/machvec.h>
#include <asm/compiler.h>

3
arch/arc/include/asm/processor.h
View File

@ -78,9 +78,6 @@ struct task_struct;
#endif
#define copy_segments(tsk, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ret)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)

2
arch/arm/boot/dts/am33xx.dtsi
View File

@ -36,6 +36,8 @@
phy1 = &usb1_phy;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
spi0 = &spi0;
spi1 = &spi1;
};
cpus {

6
arch/arm/boot/dts/am43x-epos-evm.dts
View File

@ -388,6 +388,7 @@
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
slaves = <1>;
};
&davinci_mdio {
@ -402,11 +403,6 @@
phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};

19
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
View File

@ -67,7 +67,10 @@
usb1: ohci@00400000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
&pioA PIN_PA27 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
@ -120,7 +123,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus2_uart>;
atmel,use-dma-rx;
atmel-use-dma-tx;
atmel,use-dma-tx;
status = "okay";
};
@ -178,7 +181,7 @@
uart4: serial@fc00c000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-name = "default";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus1_uart>;
status = "okay";
};
@ -330,7 +333,7 @@
};
pinctrl_led_gpio_default: led_gpio_default {
pinmux = <PIN_PA27__GPIO>,
pinmux = <PIN_PA10__GPIO>,
<PIN_PB1__GPIO>,
<PIN_PA31__GPIO>;
bias-pull-up;
@ -396,7 +399,7 @@
};
pinctrl_usb_default: usb_default {
pinmux = <PIN_PA10__GPIO>,
pinmux = <PIN_PA27__GPIO>,
<PIN_PD19__GPIO>;
bias-disable;
};
@ -520,17 +523,17 @@
red {
label = "red";
gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
};
green {
label = "green";
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
};
blue {
label = "blue";
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};

7
arch/arm/boot/dts/da850-evm.dts
View File

@ -15,6 +15,13 @@
compatible = "ti,da850-evm", "ti,da850";
model = "DA850/AM1808/OMAP-L138 EVM";
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
ethernet0 = &eth0;
};
soc@1c00000 {
pmx_core: pinmux@14120 {
status = "okay";

2
arch/arm/boot/dts/dra7xx-clocks.dtsi
View File

@ -1817,6 +1817,8 @@
clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
ti,bit-shift = <24>;
reg = <0x1868>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&abe_24m_fclk>;
};
mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {

11
arch/arm/boot/dts/omap3-n900.dts
View File

@ -144,15 +144,6 @@
io-channel-names = "temp", "bsi", "vbat";
};
rear_camera: camera@0 {
compatible = "linux,camera";
module {
model = "TCM8341MD";
sensor = <&cam1>;
};
};
pwm9: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
@ -189,10 +180,8 @@
clock-lanes = <1>;
data-lanes = <0>;
lane-polarity = <0 0>;
clock-inv = <0>;
/* Select strobe = <1> for back camera, <0> for front camera */
strobe = <1>;
crc = <0>;
};
};
};

10
arch/arm/boot/dts/omap3-n950-n9.dtsi
View File

@ -267,15 +267,19 @@
clock-frequency = <400000>;
as3645a@30 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30>;
compatible = "ams,as3645a";
flash {
flash@0 {
reg = <0x0>;
flash-timeout-us = <150000>;
flash-max-microamp = <320000>;
led-max-microamp = <60000>;
peak-current-limit = <1750000>;
ams,input-max-microamp = <1750000>;
};
indicator {
indicator@1 {
reg = <0x1>;
led-max-microamp = <10000>;
};
};

5
arch/arm/boot/dts/stm32429i-eval.dts
View File

@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@ -202,10 +203,8 @@
stmpe1600: stmpe1600@42 {
compatible = "st,stmpe1600";
reg = <0x42>;
irq-gpio = <&gpioi 8 0>;
irq-trigger = <3>;
interrupts = <8 3>;
interrupt-parent = <&exti>;
interrupt-parent = <&gpioi>;
interrupt-controller;
wakeup-source;

343
arch/arm/boot/dts/stm32f4-pinctrl.dtsi 100644
View File

@ -0,0 +1,343 @@
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
soc {
pinctrl: pin-controller {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40020000 0x3000>;
interrupt-parent = <&exti>;
st,syscfg = <&syscfg 0x8>;
pins-are-numbered;
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
bias-disable;
};
};
usart3_pins_a: usart3@0 {
pins1 {
pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
bias-disable;
};
};
usbotg_fs_pins_a: usbotg_fs@0 {
pins {
pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
<STM32F429_PA11_FUNC_OTG_FS_DM>,
<STM32F429_PA12_FUNC_OTG_FS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_fs_pins_b: usbotg_fs@1 {
pins {
pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
<STM32F429_PB14_FUNC_OTG_HS_DM>,
<STM32F429_PB15_FUNC_OTG_HS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
<STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
<STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
<STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
<STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
<STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
<STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
<STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
<STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
<STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
<STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
<STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F429_PC2_FUNC_ETH_MII_TXD2>,
<STM32F429_PB8_FUNC_ETH_MII_TXD3>,
<STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
<STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F429_PA2_FUNC_ETH_MDIO>,
<STM32F429_PC1_FUNC_ETH_MDC>,
<STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
<STM32F429_PH6_FUNC_ETH_MII_RXD2>,
<STM32F429_PH7_FUNC_ETH_MII_RXD3>;
slew-rate = <2>;
};
};
adc3_in8_pin: adc@200 {
pins {
pinmux = <STM32F429_PF10_FUNC_ANALOG>;
};
};
pwm1_pins: pwm@1 {
pins {
pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
<STM32F429_PB13_FUNC_TIM1_CH1N>,
<STM32F429_PB12_FUNC_TIM1_BKIN>;
};
};
pwm3_pins: pwm@3 {
pins {
pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
<STM32F429_PB5_FUNC_TIM3_CH2>;
};
};
i2c1_pins: i2c1@0 {
pins {
pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
<STM32F429_PB6_FUNC_I2C1_SCL>;
bias-disable;
drive-open-drain;
slew-rate = <3>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
<STM32F429_PI13_FUNC_LCD_VSYNC>,
<STM32F429_PI14_FUNC_LCD_CLK>,
<STM32F429_PI15_FUNC_LCD_R0>,
<STM32F429_PJ0_FUNC_LCD_R1>,
<STM32F429_PJ1_FUNC_LCD_R2>,
<STM32F429_PJ2_FUNC_LCD_R3>,
<STM32F429_PJ3_FUNC_LCD_R4>,
<STM32F429_PJ4_FUNC_LCD_R5>,
<STM32F429_PJ5_FUNC_LCD_R6>,
<STM32F429_PJ6_FUNC_LCD_R7>,
<STM32F429_PJ7_FUNC_LCD_G0>,
<STM32F429_PJ8_FUNC_LCD_G1>,
<STM32F429_PJ9_FUNC_LCD_G2>,
<STM32F429_PJ10_FUNC_LCD_G3>,
<STM32F429_PJ11_FUNC_LCD_G4>,
<STM32F429_PJ12_FUNC_LCD_B0>,
<STM32F429_PJ13_FUNC_LCD_B1>,
<STM32F429_PJ14_FUNC_LCD_B2>,
<STM32F429_PJ15_FUNC_LCD_B3>,
<STM32F429_PK0_FUNC_LCD_G5>,
<STM32F429_PK1_FUNC_LCD_G6>,
<STM32F429_PK2_FUNC_LCD_G7>,
<STM32F429_PK3_FUNC_LCD_B4>,
<STM32F429_PK4_FUNC_LCD_B5>,
<STM32F429_PK5_FUNC_LCD_B6>,
<STM32F429_PK6_FUNC_LCD_B7>,
<STM32F429_PK7_FUNC_LCD_DE>;
slew-rate = <2>;
};
};
dcmi_pins: dcmi@0 {
pins {
pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
<STM32F429_PB7_FUNC_DCMI_VSYNC>,
<STM32F429_PA6_FUNC_DCMI_PIXCLK>,
<STM32F429_PC6_FUNC_DCMI_D0>,
<STM32F429_PC7_FUNC_DCMI_D1>,
<STM32F429_PC8_FUNC_DCMI_D2>,
<STM32F429_PC9_FUNC_DCMI_D3>,
<STM32F429_PC11_FUNC_DCMI_D4>,
<STM32F429_PD3_FUNC_DCMI_D5>,
<STM32F429_PB8_FUNC_DCMI_D6>,
<STM32F429_PE6_FUNC_DCMI_D7>,
<STM32F429_PC10_FUNC_DCMI_D8>,
<STM32F429_PC12_FUNC_DCMI_D9>,
<STM32F429_PD6_FUNC_DCMI_D10>,
<STM32F429_PD2_FUNC_DCMI_D11>;
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
};
};
};
};

1
arch/arm/boot/dts/stm32f429-disco.dts
View File

@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
/ {

95
arch/arm/boot/dts/stm32f429-pinctrl.dtsi 100644
View File

@ -0,0 +1,95 @@
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "stm32f4-pinctrl.dtsi"
/ {
soc {
pinctrl: pin-controller {
compatible = "st,stm32f429-pinctrl";
gpioa: gpio@40020000 {
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@40020400 {
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@40020800 {
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@40020c00 {
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@40021000 {
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@40021400 {
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@40021800 {
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@40021c00 {
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@40022000 {
gpio-ranges = <&pinctrl 0 128 16>;
};
gpioj: gpio@40022400 {
gpio-ranges = <&pinctrl 0 144 16>;
};
gpiok: gpio@40022800 {
gpio-ranges = <&pinctrl 0 160 8>;
};
};
};
};

297
arch/arm/boot/dts/stm32f429.dtsi
View File

@ -47,7 +47,6 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
@ -591,302 +590,6 @@
status = "disabled";
};
pinctrl: pin-controller {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32f429-pinctrl";
ranges = <0 0x40020000 0x3000>;
interrupt-parent = <&exti>;
st,syscfg = <&syscfg 0x8>;
pins-are-numbered;
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
bias-disable;
};
};
usart3_pins_a: usart3@0 {
pins1 {
pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
bias-disable;
};
};
usbotg_fs_pins_a: usbotg_fs@0 {
pins {
pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
<STM32F429_PA11_FUNC_OTG_FS_DM>,
<STM32F429_PA12_FUNC_OTG_FS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_fs_pins_b: usbotg_fs@1 {
pins {
pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
<STM32F429_PB14_FUNC_OTG_HS_DM>,
<STM32F429_PB15_FUNC_OTG_HS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
<STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
<STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
<STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
<STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
<STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
<STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
<STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
<STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
<STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
<STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
<STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F429_PC2_FUNC_ETH_MII_TXD2>,
<STM32F429_PB8_FUNC_ETH_MII_TXD3>,
<STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
<STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F429_PA2_FUNC_ETH_MDIO>,
<STM32F429_PC1_FUNC_ETH_MDC>,
<STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
<STM32F429_PH6_FUNC_ETH_MII_RXD2>,
<STM32F429_PH7_FUNC_ETH_MII_RXD3>;
slew-rate = <2>;
};
};
adc3_in8_pin: adc@200 {
pins {
pinmux = <STM32F429_PF10_FUNC_ANALOG>;
};
};
pwm1_pins: pwm@1 {
pins {
pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
<STM32F429_PB13_FUNC_TIM1_CH1N>,
<STM32F429_PB12_FUNC_TIM1_BKIN>;
};
};
pwm3_pins: pwm@3 {
pins {
pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
<STM32F429_PB5_FUNC_TIM3_CH2>;
};
};
i2c1_pins: i2c1@0 {
pins {
pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
<STM32F429_PB6_FUNC_I2C1_SCL>;
bias-disable;
drive-open-drain;
slew-rate = <3>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
<STM32F429_PI13_FUNC_LCD_VSYNC>,
<STM32F429_PI14_FUNC_LCD_CLK>,
<STM32F429_PI15_FUNC_LCD_R0>,
<STM32F429_PJ0_FUNC_LCD_R1>,
<STM32F429_PJ1_FUNC_LCD_R2>,
<STM32F429_PJ2_FUNC_LCD_R3>,
<STM32F429_PJ3_FUNC_LCD_R4>,
<STM32F429_PJ4_FUNC_LCD_R5>,
<STM32F429_PJ5_FUNC_LCD_R6>,
<STM32F429_PJ6_FUNC_LCD_R7>,
<STM32F429_PJ7_FUNC_LCD_G0>,
<STM32F429_PJ8_FUNC_LCD_G1>,
<STM32F429_PJ9_FUNC_LCD_G2>,
<STM32F429_PJ10_FUNC_LCD_G3>,
<STM32F429_PJ11_FUNC_LCD_G4>,
<STM32F429_PJ12_FUNC_LCD_B0>,
<STM32F429_PJ13_FUNC_LCD_B1>,
<STM32F429_PJ14_FUNC_LCD_B2>,
<STM32F429_PJ15_FUNC_LCD_B3>,
<STM32F429_PK0_FUNC_LCD_G5>,
<STM32F429_PK1_FUNC_LCD_G6>,
<STM32F429_PK2_FUNC_LCD_G7>,
<STM32F429_PK3_FUNC_LCD_B4>,
<STM32F429_PK4_FUNC_LCD_B5>,
<STM32F429_PK5_FUNC_LCD_B6>,
<STM32F429_PK6_FUNC_LCD_B7>,
<STM32F429_PK7_FUNC_LCD_DE>;
slew-rate = <2>;
};
};
dcmi_pins: dcmi@0 {
pins {
pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
<STM32F429_PB7_FUNC_DCMI_VSYNC>,
<STM32F429_PA6_FUNC_DCMI_PIXCLK>,
<STM32F429_PC6_FUNC_DCMI_D0>,
<STM32F429_PC7_FUNC_DCMI_D1>,
<STM32F429_PC8_FUNC_DCMI_D2>,
<STM32F429_PC9_FUNC_DCMI_D3>,
<STM32F429_PC11_FUNC_DCMI_D4>,
<STM32F429_PD3_FUNC_DCMI_D5>,
<STM32F429_PB8_FUNC_DCMI_D6>,
<STM32F429_PE6_FUNC_DCMI_D7>,
<STM32F429_PC10_FUNC_DCMI_D8>,
<STM32F429_PC12_FUNC_DCMI_D9>,
<STM32F429_PD6_FUNC_DCMI_D10>,
<STM32F429_PD2_FUNC_DCMI_D11>;
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
};
};
crc: crc@40023000 {
compatible = "st,stm32f4-crc";
reg = <0x40023000 0x400>;

1
arch/arm/boot/dts/stm32f469-disco.dts
View File

@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
#include "stm32f469-pinctrl.dtsi"
/ {
model = "STMicroelectronics STM32F469i-DISCO board";

96
arch/arm/boot/dts/stm32f469-pinctrl.dtsi 100644
View File

@ -0,0 +1,96 @@
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "stm32f4-pinctrl.dtsi"
/ {
soc {
pinctrl: pin-controller {
compatible = "st,stm32f469-pinctrl";
gpioa: gpio@40020000 {
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@40020400 {
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@40020800 {
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@40020c00 {
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@40021000 {
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@40021400 {
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@40021800 {
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@40021c00 {
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@40022000 {
gpio-ranges = <&pinctrl 0 128 16>;
};
gpioj: gpio@40022400 {
gpio-ranges = <&pinctrl 0 144 6>,
<&pinctrl 12 156 4>;
};
gpiok: gpio@40022800 {
gpio-ranges = <&pinctrl 3 163 5>;
};
};
};
};

3
arch/arm/configs/gemini_defconfig
View File

@ -32,6 +32,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_PATA_FTIDE010=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
@ -55,8 +56,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_GEMINI=y
CONFIG_DMADEVICES=y
CONFIG_AMBA_PL08X=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y

2
arch/arm/configs/pxa_defconfig
View File

@ -471,7 +471,7 @@ CONFIG_LCD_PLATFORM=m
CONFIG_LCD_TOSA=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_TOSA=m
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_SOUND=m

2
arch/arm/configs/viper_defconfig
View File

@ -113,7 +113,7 @@ CONFIG_FB_PXA_PARAMETERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_PWM=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m

2
arch/arm/configs/zeus_defconfig
View File

@ -112,7 +112,7 @@ CONFIG_FB_PXA=m
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m

15
arch/arm/include/asm/thread_info.h
View File

@ -139,11 +139,10 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define TIF_NEED_RESCHED 1 /* rescheduling necessary */
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_UPROBE 3 /* breakpointed or singlestepping */
#define TIF_FSCHECK 4 /* Check FS is USER_DS on return */
#define TIF_SYSCALL_TRACE 5 /* syscall trace active */
#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */
#define TIF_SYSCALL_TRACEPOINT 7 /* syscall tracepoint instrumentation */
#define TIF_SECCOMP 8 /* seccomp syscall filtering active */
#define TIF_SYSCALL_TRACE 4 /* syscall trace active */
#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */
#define TIF_SYSCALL_TRACEPOINT 6 /* syscall tracepoint instrumentation */
#define TIF_SECCOMP 7 /* seccomp syscall filtering active */
#define TIF_NOHZ 12 /* in adaptive nohz mode */
#define TIF_USING_IWMMXT 17
@ -154,7 +153,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_UPROBE (1 << TIF_UPROBE)
#define _TIF_FSCHECK (1 << TIF_FSCHECK)
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
@ -168,9 +166,8 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
/*
* Change these and you break ASM code in entry-common.S
*/
#define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
_TIF_NOTIFY_RESUME | _TIF_UPROBE | \
_TIF_FSCHECK)
#define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
_TIF_NOTIFY_RESUME | _TIF_UPROBE)
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_THREAD_INFO_H */

2
arch/arm/include/asm/uaccess.h
View File

@ -70,8 +70,6 @@ static inline void set_fs(mm_segment_t fs)
{
current_thread_info()->addr_limit = fs;
modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
/* On user-mode return, check fs is correct */
set_thread_flag(TIF_FSCHECK);
}
#define segment_eq(a, b) ((a) == (b))

20
arch/arm/kernel/entry-common.S
View File

@ -12,6 +12,7 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <asm/unwind.h>
#include <asm/memory.h>
#ifdef CONFIG_AEABI
#include <asm/unistd-oabi.h>
#endif
@ -48,12 +49,14 @@ ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
disable_irq_notrace @ disable interrupts
ldr r2, [tsk, #TI_ADDR_LIMIT]
cmp r2, #TASK_SIZE
blne addr_limit_check_failed
ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
tst r1, #_TIF_SYSCALL_WORK
bne fast_work_pending
tst r1, #_TIF_WORK_MASK
tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
bne fast_work_pending
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
@ -76,16 +79,16 @@ ret_fast_syscall:
UNWIND(.cantunwind )
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
disable_irq_notrace @ disable interrupts
ldr r2, [tsk, #TI_ADDR_LIMIT]
cmp r2, #TASK_SIZE
blne addr_limit_check_failed
ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
tst r1, #_TIF_SYSCALL_WORK
bne fast_work_pending
tst r1, #_TIF_WORK_MASK
tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
beq no_work_pending
UNWIND(.fnend )
ENDPROC(ret_fast_syscall)
/* Slower path - fall through to work_pending */
fast_work_pending:
#endif
tst r1, #_TIF_SYSCALL_WORK
@ -111,6 +114,9 @@ ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq_notrace @ disable interrupts
ENTRY(ret_to_user_from_irq)
ldr r2, [tsk, #TI_ADDR_LIMIT]
cmp r2, #TASK_SIZE
blne addr_limit_check_failed
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne slow_work_pending

10
arch/arm/kernel/signal.c
View File

@ -614,10 +614,6 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
* Update the trace code with the current status.
*/
trace_hardirqs_off();
/* Check valid user FS if needed */
addr_limit_user_check();
do {
if (likely(thread_flags & _TIF_NEED_RESCHED)) {
schedule();
@ -678,3 +674,9 @@ struct page *get_signal_page(void)
return page;
}
/* Defer to generic check */
asmlinkage void addr_limit_check_failed(void)
{
addr_limit_user_check();
}

4
arch/arm/mach-at91/pm.c
View File

@ -533,8 +533,8 @@ static void __init at91_pm_backup_init(void)
}
pm_bu->suspended = 0;
pm_bu->canary = virt_to_phys(&canary);
pm_bu->resume = virt_to_phys(cpu_resume);
pm_bu->canary = __pa_symbol(&canary);
pm_bu->resume = __pa_symbol(cpu_resume);
return;

4
arch/arm/mach-omap2/hsmmc.c
View File

@ -58,10 +58,10 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
struct platform_device *pdev;
int res;
if (omap_hsmmc_done != 1)
if (omap_hsmmc_done)
return;
omap_hsmmc_done++;
omap_hsmmc_done = 1;
for (; c->mmc; c++) {
pdev = c->pdev;

1
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View File

@ -839,6 +839,7 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = {
.name = "gpio1",
.class = &dra7xx_gpio_hwmod_class,
.clkdm_name = "wkupaon_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "wkupaon_iclk_mux",
.prcm = {
.omap4 = {

5
arch/arm64/Makefile
View File

@ -50,17 +50,22 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
KBUILD_CFLAGS += $(call cc-option, -mpc-relative-literal-loads)
KBUILD_AFLAGS += $(lseinstr) $(brokengasinst)
KBUILD_CFLAGS += $(call cc-option,-mabi=lp64)
KBUILD_AFLAGS += $(call cc-option,-mabi=lp64)
ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
KBUILD_CPPFLAGS += -mbig-endian
CHECKFLAGS += -D__AARCH64EB__
AS += -EB
LD += -EB
LDFLAGS += -maarch64linuxb
UTS_MACHINE := aarch64_be
else
KBUILD_CPPFLAGS += -mlittle-endian
CHECKFLAGS += -D__AARCH64EL__
AS += -EL
LD += -EL
LDFLAGS += -maarch64linux
UTS_MACHINE := aarch64
endif

10
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
View File

@ -168,7 +168,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@ -194,7 +195,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -212,10 +214,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

19
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
View File

@ -107,6 +107,9 @@
states = <3300000 0>,
<1800000 1>;
regulator-settling-time-up-us = <100>;
regulator-settling-time-down-us = <5000>;
};
wifi_32k: wifi-32k {
@ -250,7 +253,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@ -276,11 +280,16 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
max-frequency = <200000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
@ -294,10 +303,10 @@
&sd_emmc_c {
status = "disabled";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;

12
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
View File

@ -51,7 +51,7 @@
/ {
compatible = "nexbox,a95x", "amlogic,meson-gxbb";
model = "NEXBOX A95X";
aliases {
serial0 = &uart_AO;
};
@ -232,7 +232,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@ -253,7 +254,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -271,10 +273,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

9
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
View File

@ -50,7 +50,7 @@
/ {
compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
model = "Hardkernel ODROID-C2";
aliases {
serial0 = &uart_AO;
};
@ -253,7 +253,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -271,10 +272,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;

13
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
View File

@ -194,7 +194,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@ -220,10 +221,14 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
max-frequency = <100000000>;
disable-wp;
@ -238,10 +243,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

10
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
View File

@ -155,7 +155,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@ -181,7 +182,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -198,10 +200,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

39
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View File

@ -392,6 +392,17 @@
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
@ -430,6 +441,17 @@
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
@ -442,6 +464,17 @@
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
@ -661,21 +694,21 @@
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&xtal>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&xtal>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};

7
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
View File

@ -123,7 +123,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -141,10 +142,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <100000000>;
non-removable;

13
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
View File

@ -91,6 +91,9 @@
states = <3300000 0>,
<1800000 1>;
regulator-settling-time-up-us = <200>;
regulator-settling-time-down-us = <50000>;
};
vddio_boot: regulator-vddio_boot {
@ -197,10 +200,14 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
max-frequency = <100000000>;
disable-wp;
@ -215,10 +222,12 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-3_3v;
max-frequency = <50000000>;
non-removable;
disable-wp;

10
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
View File

@ -189,7 +189,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@ -210,7 +211,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -228,10 +230,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

10
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
View File

@ -95,7 +95,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@ -116,7 +117,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -134,10 +136,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

39
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
View File

@ -281,6 +281,17 @@
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
@ -319,6 +330,17 @@
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
@ -331,6 +353,17 @@
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
@ -603,21 +636,21 @@
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&xtal>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&xtal>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};

7
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
View File

@ -175,7 +175,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@ -193,10 +194,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

1
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
View File

@ -220,7 +220,6 @@
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

4
arch/arm64/boot/dts/marvell/armada-ap806.dtsi
View File

@ -254,7 +254,7 @@
ap_syscon: system-controller@6f4000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x1000>;
reg = <0x6f4000 0x2000>;
ap_clk: clock {
compatible = "marvell,ap806-clock";
@ -265,7 +265,7 @@
compatible = "marvell,ap806-pinctrl";
};
ap_gpio: gpio {
ap_gpio: gpio@1040 {
compatible = "marvell,armada-8k-gpio";
offset = <0x1040>;
ngpios = <20>;

72
arch/arm64/boot/dts/rockchip/rk3368.dtsi
View File

@ -113,8 +113,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>; /* min followed by max */
};
@ -123,8 +122,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
};
cpu_l2: cpu@2 {
@ -132,8 +129,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
};
cpu_l3: cpu@3 {
@ -141,8 +136,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
};
cpu_b0: cpu@100 {
@ -150,8 +143,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>; /* min followed by max */
};
@ -160,8 +152,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
};
cpu_b2: cpu@102 {
@ -169,8 +159,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
};
cpu_b3: cpu@103 {
@ -178,62 +166,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
};
};
cluster0_opp: opp-table0 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <312000000>;
opp-microvolt = <950000>;
clock-latency-ns = <40000>;
};
opp01 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <950000>;
};
opp02 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000>;
};
opp03 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1025000>;
};
opp04 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1125000>;
};
};
cluster1_opp: opp-table1 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <312000000>;
opp-microvolt = <950000>;
clock-latency-ns = <40000>;
};
opp01 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <950000>;
};
opp02 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000>;
};
opp03 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <975000>;
};
opp04 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1050000>;
};
};

6
arch/arm64/boot/dts/rockchip/rk3399.dtsi
View File

@ -1629,9 +1629,9 @@
compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0x0 0xff960000 0x0 0x8000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
<&cru SCLK_DPHY_TX0_CFG>;
clock-names = "ref", "pclk", "phy_cfg";
clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
<&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
clock-names = "ref", "pclk", "phy_cfg", "grf";
power-domains = <&power RK3399_PD_VIO>;
rockchip,grf = <&grf>;
status = "disabled";

4
arch/arm64/include/asm/linkage.h
View File

@ -1,7 +1,7 @@
#ifndef __ASM_LINKAGE_H
#define __ASM_LINKAGE_H
#define __ALIGN .align 4
#define __ALIGN_STR ".align 4"
#define __ALIGN .align 2
#define __ALIGN_STR ".align 2"
#endif

2
arch/arm64/include/asm/pgtable.h
View File

@ -401,7 +401,7 @@ static inline phys_addr_t pmd_page_paddr(pmd_t pmd)
/* Find an entry in the third-level page table. */
#define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset_phys(dir,addr) (pmd_page_paddr(*(dir)) + pte_index(addr) * sizeof(pte_t))
#define pte_offset_phys(dir,addr) (pmd_page_paddr(READ_ONCE(*(dir))) + pte_index(addr) * sizeof(pte_t))
#define pte_offset_kernel(dir,addr) ((pte_t *)__va(pte_offset_phys((dir), (addr))))
#define pte_offset_map(dir,addr) pte_offset_kernel((dir), (addr))

4
arch/arm64/kernel/fpsimd.c
View File

@ -321,6 +321,8 @@ void kernel_neon_end(void)
}
EXPORT_SYMBOL(kernel_neon_end);
#ifdef CONFIG_EFI
static DEFINE_PER_CPU(struct fpsimd_state, efi_fpsimd_state);
static DEFINE_PER_CPU(bool, efi_fpsimd_state_used);
@ -370,6 +372,8 @@ void __efi_fpsimd_end(void)
kernel_neon_end();
}
#endif /* CONFIG_EFI */
#endif /* CONFIG_KERNEL_MODE_NEON */
#ifdef CONFIG_CPU_PM

1
arch/arm64/kernel/head.S
View File

@ -384,6 +384,7 @@ ENTRY(kimage_vaddr)
* booted in EL1 or EL2 respectively.
*/
ENTRY(el2_setup)
msr SPsel, #1 // We want to use SP_EL{1,2}
mrs x0, CurrentEL
cmp x0, #CurrentEL_EL2
b.eq 1f

6
arch/arm64/kernel/signal.c
View File

@ -751,10 +751,10 @@ asmlinkage void do_notify_resume(struct pt_regs *regs,
*/
trace_hardirqs_off();
/* Check valid user FS if needed */
addr_limit_user_check();
do {
/* Check valid user FS if needed */
addr_limit_user_check();
if (thread_flags & _TIF_NEED_RESCHED) {
schedule();
} else {

2
arch/arm64/mm/fault.c
View File

@ -651,7 +651,7 @@ static const struct fault_info fault_info[] = {
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 0 translation fault" },
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" },
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" },
{ do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
{ do_bad, SIGBUS, 0, "unknown 8" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" },

47
arch/blackfin/mach-bf518/boards/ezbrd.c
View File

@ -25,7 +25,6 @@
#include <asm/dpmc.h>
#include <asm/bfin_sdh.h>
#include <linux/spi/ad7877.h>
#include <net/dsa.h>
/*
* Name the Board for the /proc/cpuinfo
@ -105,11 +104,7 @@ static const unsigned short bfin_mac_peripherals[] = {
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
{
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
.addr = 3,
#else
.addr = 1,
#endif
.irq = IRQ_MAC_PHYINT,
},
};
@ -119,9 +114,6 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
.phydev_data = bfin_phydev_data,
.phy_mode = PHY_INTERFACE_MODE_MII,
.mac_peripherals = bfin_mac_peripherals,
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
.phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
#endif
.vlan1_mask = 1,
.vlan2_mask = 2,
};
@ -140,29 +132,6 @@ static struct platform_device bfin_mac_device = {
}
};
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
static struct dsa_chip_data ksz8893m_switch_chip_data = {
.mii_bus = &bfin_mii_bus.dev,
.port_names = {
NULL,
"eth%d",
"eth%d",
"cpu",
},
};
static struct dsa_platform_data ksz8893m_switch_data = {
.nr_chips = 1,
.netdev = &bfin_mac_device.dev,
.chip = &ksz8893m_switch_chip_data,
};
static struct platform_device ksz8893m_switch_device = {
.name = "dsa",
.id = 0,
.num_resources = 0,
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
#endif
#if IS_ENABLED(CONFIG_MTD_M25P80)
@ -228,19 +197,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if IS_ENABLED(CONFIG_BFIN_MAC)
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
{
.modalias = "ksz8893m",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 1,
.platform_data = NULL,
.mode = SPI_MODE_3,
},
#endif
#endif
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
@ -714,9 +670,6 @@ static struct platform_device *stamp_devices[] __initdata = {
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
&ksz8893m_switch_device,
#endif
#endif
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)

1
arch/blackfin/mach-bf518/boards/tcm-bf518.c
View File

@ -25,7 +25,6 @@
#include <asm/dpmc.h>
#include <asm/bfin_sdh.h>
#include <linux/spi/ad7877.h>
#include <net/dsa.h>
/*
* Name the Board for the /proc/cpuinfo

3
arch/c6x/include/asm/processor.h
View File

@ -92,9 +92,6 @@ static inline void release_thread(struct task_struct *dead_task)
{
}
#define copy_segments(tsk, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
/*
* saved kernel SP and DP of a blocked thread.
*/

4
arch/frv/include/asm/processor.h
View File

@ -92,10 +92,6 @@ static inline void release_thread(struct task_struct *dead_task)
extern asmlinkage void save_user_regs(struct user_context *target);
extern asmlinkage void *restore_user_regs(const struct user_context *target, ...);
#define copy_segments(tsk, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
#define forget_segments() do { } while (0)
unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc)

4
arch/m32r/Kconfig
View File

@ -194,6 +194,10 @@ config TIMER_DIVIDE
int "Timer divider (integer)"
default "128"
config CPU_BIG_ENDIAN
bool "Generate big endian code"
default n
config CPU_LITTLE_ENDIAN
bool "Generate little endian code"
default n

8
arch/m32r/include/asm/processor.h
View File

@ -118,14 +118,6 @@ struct mm_struct;
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
/* Copy and release all segment info associated with a VM */
extern void copy_segments(struct task_struct *p, struct mm_struct * mm);
extern void release_segments(struct mm_struct * mm);
/* Copy and release all segment info associated with a VM */
#define copy_segments(p, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) ((tsk)->thread.lr)
#define KSTK_ESP(tsk) ((tsk)->thread.sp)

9
arch/m32r/kernel/traps.c
View File

@ -114,6 +114,15 @@ static void set_eit_vector_entries(void)
_flush_cache_copyback_all();
}
void abort(void)
{
BUG();
/* if that doesn't kill us, halt */
panic("Oops failed to kill thread");
}
EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
set_eit_vector_entries();

3
arch/metag/include/asm/processor.h
View File

@ -131,9 +131,6 @@ static inline void release_thread(struct task_struct *dead_task)
{
}
#define copy_segments(tsk, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
/*
* Return saved PC of a blocked thread.
*/

2
arch/microblaze/Kconfig
View File

@ -39,7 +39,7 @@ config MICROBLAZE
# Endianness selection
choice
prompt "Endianness selection"
default CPU_BIG_ENDIAN
default CPU_LITTLE_ENDIAN
help
microblaze architectures can be configured for either little or
big endian formats. Be sure to select the appropriate mode.

1
arch/microblaze/include/uapi/asm/Kbuild
View File

@ -7,6 +7,7 @@ generic-y += fcntl.h
generic-y += ioctl.h
generic-y += ioctls.h
generic-y += ipcbuf.h
generic-y += kvm_para.h
generic-y += mman.h
generic-y += msgbuf.h
generic-y += param.h

2
arch/microblaze/kernel/dma.c
View File

@ -165,7 +165,7 @@ int dma_direct_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
unsigned long attrs)
{
#ifdef CONFIG_MMU
unsigned long user_count = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
unsigned long user_count = vma_pages(vma);
unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
unsigned long off = vma->vm_pgoff;
unsigned long pfn;

12
arch/mips/ath79/pci.c
View File

@ -22,10 +22,10 @@
#include "pci.h"
static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
static unsigned ath79_pci_nr_irqs __initdata;
static const struct ath79_pci_irq *ath79_pci_irq_map;
static unsigned ath79_pci_nr_irqs;
static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
{
.slot = 17,
.pin = 1,
@ -41,7 +41,7 @@ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
}
};
static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
{
.slot = 0,
.pin = 1,
@ -49,7 +49,7 @@ static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
}
};
static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
{
.bus = 0,
.slot = 0,
@ -64,7 +64,7 @@ static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
},
};
int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
{
int irq = -1;
int i;

15
arch/mips/include/asm/mipsregs.h
View File

@ -1377,29 +1377,32 @@ do { \
#define __write_64bit_c0_split(source, sel, val) \
do { \
unsigned long long __tmp; \
unsigned long __flags; \
\
local_irq_save(__flags); \
if (sel == 0) \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dsll\t%L0, %L0, 32\n\t" \
"dsll\t%L0, %L1, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
"dsll\t%M0, %M0, 32\n\t" \
"dsll\t%M0, %M1, 32\n\t" \
"or\t%L0, %L0, %M0\n\t" \
"dmtc0\t%L0, " #source "\n\t" \
".set\tmips0" \
: : "r" (val)); \
: "=&r,r" (__tmp) \
: "r,0" (val)); \
else \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dsll\t%L0, %L0, 32\n\t" \
"dsll\t%L0, %L1, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
"dsll\t%M0, %M0, 32\n\t" \
"dsll\t%M0, %M1, 32\n\t" \
"or\t%L0, %L0, %M0\n\t" \
"dmtc0\t%L0, " #source ", " #sel "\n\t" \
".set\tmips0" \
: : "r" (val)); \
: "=&r,r" (__tmp) \
: "r,0" (val)); \
local_irq_restore(__flags); \
} while (0)

3
arch/mips/kernel/perf_event_mipsxx.c
View File

@ -618,8 +618,7 @@ static int mipspmu_event_init(struct perf_event *event)
return -ENOENT;
}
if ((unsigned int)event->cpu >= nr_cpumask_bits ||
(event->cpu >= 0 && !cpu_online(event->cpu)))
if (event->cpu >= 0 && !cpu_online(event->cpu))
return -ENODEV;
if (!atomic_inc_not_zero(&active_events)) {

4
arch/mips/pci/fixup-capcella.c
View File

@ -32,13 +32,13 @@
#define INTC PC104PLUS_INTC_IRQ
#define INTD PC104PLUS_INTD_IRQ
static char irq_tab_capcella[][5] __initdata = {
static char irq_tab_capcella[][5] = {
[11] = { -1, INT1, INT1, INT1, INT1 },
[12] = { -1, INT2, INT2, INT2, INT2 },
[14] = { -1, INTA, INTB, INTC, INTD }
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_tab_capcella[slot][pin];
}

8
arch/mips/pci/fixup-cobalt.c
View File

@ -147,7 +147,7 @@ static void qube_raq_via_board_id_fixup(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
qube_raq_via_board_id_fixup);
static char irq_tab_qube1[] __initdata = {
static char irq_tab_qube1[] = {
[COBALT_PCICONF_CPU] = 0,
[COBALT_PCICONF_ETH0] = QUBE1_ETH0_IRQ,
[COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
@ -156,7 +156,7 @@ static char irq_tab_qube1[] __initdata = {
[COBALT_PCICONF_ETH1] = 0
};
static char irq_tab_cobalt[] __initdata = {
static char irq_tab_cobalt[] = {
[COBALT_PCICONF_CPU] = 0,
[COBALT_PCICONF_ETH0] = ETH0_IRQ,
[COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
@ -165,7 +165,7 @@ static char irq_tab_cobalt[] __initdata = {
[COBALT_PCICONF_ETH1] = ETH1_IRQ
};
static char irq_tab_raq2[] __initdata = {
static char irq_tab_raq2[] = {
[COBALT_PCICONF_CPU] = 0,
[COBALT_PCICONF_ETH0] = ETH0_IRQ,
[COBALT_PCICONF_RAQSCSI] = RAQ2_SCSI_IRQ,
@ -174,7 +174,7 @@ static char irq_tab_raq2[] __initdata = {
[COBALT_PCICONF_ETH1] = ETH1_IRQ
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
return irq_tab_qube1[slot];

4
arch/mips/pci/fixup-emma2rh.c
View File

@ -43,7 +43,7 @@
*/
#define MAX_SLOT_NUM 10
static unsigned char irq_map[][5] __initdata = {
static unsigned char irq_map[][5] = {
[3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC,
MARKEINS_PCI_IRQ_INTD, 0,},
[4] = {0, MARKEINS_PCI_IRQ_INTA, 0, 0, 0,},
@ -85,7 +85,7 @@ static void emma2rh_pci_host_fixup(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH,
emma2rh_pci_host_fixup);
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_map[slot][pin];
}

2
arch/mips/pci/fixup-fuloong2e.c
View File

@ -19,7 +19,7 @@
/* South bridge slot number is set by the pci probe process */
static u8 sb_slot = 5;
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = 0;

4
arch/mips/pci/fixup-ip32.c
View File

@ -21,7 +21,7 @@
#define INTB MACEPCI_SHARED0_IRQ
#define INTC MACEPCI_SHARED1_IRQ
#define INTD MACEPCI_SHARED2_IRQ
static char irq_tab_mace[][5] __initdata = {
static char irq_tab_mace[][5] = {
/* Dummy INT#A INT#B INT#C INT#D */
{0, 0, 0, 0, 0}, /* This is placeholder row - never used */
{0, SCSI0, SCSI0, SCSI0, SCSI0},
@ -39,7 +39,7 @@ static char irq_tab_mace[][5] __initdata = {
* irqs. I suppose a device without a pin A will thank us for doing it
* right if there exists such a broken piece of crap.
*/
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_tab_mace[slot][pin];
}

2
arch/mips/pci/fixup-jmr3927.c
View File

@ -31,7 +31,7 @@
#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
unsigned char irq = pin;

Some files were not shown because too many files have changed in this diff Show More