ASoC: imx-wm8962: Remove machine driver
fsl-asoc-card machine driver also handles wm8962, so there is really no need for keeping the dedicated imx-wm8962 driver anymore. Remove the imx-wm8962 machine driver. Suggested-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>hifive-unleashed-5.1
Fabio Estevam
Mark Brown
parent
7928b2cbe5
commit
790d631dcf
|
|
@ -28,7 +28,6 @@ The compatible list for this generic sound card currently:
|
|||
(compatible with CS4271 and CS4272)
|
||||
|
||||
"fsl,imx-audio-wm8962"
|
||||
(compatible with Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt)
|
||||
|
||||
"fsl,imx-audio-sgtl5000"
|
||||
(compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
|
||||
|
|
|
|||
|
|
@ -1,53 +0,0 @@
|
|||
Freescale i.MX audio complex with WM8962 codec
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : "fsl,imx-audio-wm8962"
|
||||
|
||||
- model : The user-visible name of this sound complex
|
||||
|
||||
- ssi-controller : The phandle of the i.MX SSI controller
|
||||
|
||||
- audio-codec : The phandle of the WM8962 audio codec
|
||||
|
||||
- audio-routing : A list of the connections between audio components.
|
||||
Each entry is a pair of strings, the first being the
|
||||
connection's sink, the second being the connection's
|
||||
source. Valid names could be power supplies, WM8962
|
||||
pins, and the jacks on the board:
|
||||
|
||||
Power supplies:
|
||||
* Mic Bias
|
||||
|
||||
Board connectors:
|
||||
* Mic Jack
|
||||
* Headphone Jack
|
||||
* Ext Spk
|
||||
|
||||
- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
|
||||
|
||||
- mux-ext-port : The external port of the i.MX audio muxer
|
||||
|
||||
Note: The AUDMUX port numbering should start at 1, which is consistent with
|
||||
hardware manual.
|
||||
|
||||
Example:
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx6q-sabresd-wm8962",
|
||||
"fsl,imx-audio-wm8962";
|
||||
model = "wm8962-audio";
|
||||
ssi-controller = <&ssi2>;
|
||||
audio-codec = <&codec>;
|
||||
audio-routing =
|
||||
"Headphone Jack", "HPOUTL",
|
||||
"Headphone Jack", "HPOUTR",
|
||||
"Ext Spk", "SPKOUTL",
|
||||
"Ext Spk", "SPKOUTR",
|
||||
"MICBIAS", "AMIC",
|
||||
"IN3R", "MICBIAS",
|
||||
"DMIC", "MICBIAS",
|
||||
"DMICDAT", "DMIC";
|
||||
mux-int-port = <2>;
|
||||
mux-ext-port = <3>;
|
||||
};
|
||||
|
|
@ -231,17 +231,6 @@ config SND_SOC_EUKREA_TLV320
|
|||
Enable I2S based access to the TLV320AIC23B codec attached
|
||||
to the SSI interface
|
||||
|
||||
config SND_SOC_IMX_WM8962
|
||||
tristate "SoC Audio support for i.MX boards with wm8962"
|
||||
depends on OF && I2C && INPUT
|
||||
select SND_SOC_WM8962
|
||||
select SND_SOC_IMX_PCM_DMA
|
||||
select SND_SOC_IMX_AUDMUX
|
||||
select SND_SOC_FSL_SSI
|
||||
help
|
||||
Say Y if you want to add support for SoC audio on an i.MX board with
|
||||
a wm8962 codec.
|
||||
|
||||
config SND_SOC_IMX_ES8328
|
||||
tristate "SoC Audio support for i.MX boards with the ES8328 codec"
|
||||
depends on OF && (I2C || SPI)
|
||||
|
|
|
|||
|
|
@ -55,7 +55,6 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
|
|||
snd-soc-wm1133-ev1-objs := wm1133-ev1.o
|
||||
snd-soc-imx-es8328-objs := imx-es8328.o
|
||||
snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
|
||||
snd-soc-imx-wm8962-objs := imx-wm8962.o
|
||||
snd-soc-imx-spdif-objs := imx-spdif.o
|
||||
snd-soc-imx-mc13783-objs := imx-mc13783.o
|
||||
|
||||
|
|
@ -65,6 +64,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
|
|||
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
|
||||
obj-$(CONFIG_SND_SOC_IMX_ES8328) += snd-soc-imx-es8328.o
|
||||
obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
|
||||
obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
|
||||
obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
|
||||
obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
|
||||
|
|
|
|||
|
|
@ -1,312 +0,0 @@
|
|||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Based on imx-sgtl5000.c
|
||||
* Copyright 2012 Freescale Semiconductor, Inc.
|
||||
* Copyright 2012 Linaro Ltd.
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/clk.h>
|
||||
#include <sound/soc.h>
|
||||
#include <sound/pcm_params.h>
|
||||
#include <sound/soc-dapm.h>
|
||||
#include <linux/pinctrl/consumer.h>
|
||||
|
||||
#include "../codecs/wm8962.h"
|
||||
#include "imx-audmux.h"
|
||||
|
||||
#define DAI_NAME_SIZE 32
|
||||
|
||||
struct imx_wm8962_data {
|
||||
struct snd_soc_dai_link dai;
|
||||
struct snd_soc_card card;
|
||||
char codec_dai_name[DAI_NAME_SIZE];
|
||||
char platform_name[DAI_NAME_SIZE];
|
||||
unsigned int clk_frequency;
|
||||
};
|
||||
|
||||
struct imx_priv {
|
||||
struct platform_device *pdev;
|
||||
int sample_rate;
|
||||
snd_pcm_format_t sample_format;
|
||||
};
|
||||
|
||||
static const struct snd_soc_dapm_widget imx_wm8962_dapm_widgets[] = {
|
||||
SND_SOC_DAPM_HP("Headphone Jack", NULL),
|
||||
SND_SOC_DAPM_SPK("Ext Spk", NULL),
|
||||
SND_SOC_DAPM_MIC("AMIC", NULL),
|
||||
SND_SOC_DAPM_MIC("DMIC", NULL),
|
||||
};
|
||||
|
||||
static int imx_hifi_hw_params(struct snd_pcm_substream *substream,
|
||||
struct snd_pcm_hw_params *params)
|
||||
{
|
||||
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
||||
struct imx_priv *priv = snd_soc_card_get_drvdata(rtd->card);
|
||||
|
||||
priv->sample_rate = params_rate(params);
|
||||
priv->sample_format = params_format(params);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct snd_soc_ops imx_hifi_ops = {
|
||||
.hw_params = imx_hifi_hw_params,
|
||||
};
|
||||
|
||||
static int imx_wm8962_set_bias_level(struct snd_soc_card *card,
|
||||
struct snd_soc_dapm_context *dapm,
|
||||
enum snd_soc_bias_level level)
|
||||
{
|
||||
struct snd_soc_pcm_runtime *rtd;
|
||||
struct snd_soc_dai *codec_dai;
|
||||
struct imx_priv *priv = snd_soc_card_get_drvdata(card);
|
||||
struct imx_wm8962_data *data = snd_soc_card_get_drvdata(card);
|
||||
struct device *dev = &priv->pdev->dev;
|
||||
unsigned int pll_out;
|
||||
int ret;
|
||||
|
||||
rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
|
||||
codec_dai = rtd->codec_dai;
|
||||
if (dapm->dev != codec_dai->dev)
|
||||
return 0;
|
||||
|
||||
switch (level) {
|
||||
case SND_SOC_BIAS_PREPARE:
|
||||
if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
|
||||
if (priv->sample_format == SNDRV_PCM_FORMAT_S24_LE)
|
||||
pll_out = priv->sample_rate * 384;
|
||||
else
|
||||
pll_out = priv->sample_rate * 256;
|
||||
|
||||
ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
|
||||
WM8962_FLL_MCLK, data->clk_frequency,
|
||||
pll_out);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to start FLL: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = snd_soc_dai_set_sysclk(codec_dai,
|
||||
WM8962_SYSCLK_FLL, pll_out,
|
||||
SND_SOC_CLOCK_IN);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to set SYSCLK: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case SND_SOC_BIAS_STANDBY:
|
||||
if (dapm->bias_level == SND_SOC_BIAS_PREPARE) {
|
||||
ret = snd_soc_dai_set_sysclk(codec_dai,
|
||||
WM8962_SYSCLK_MCLK, data->clk_frequency,
|
||||
SND_SOC_CLOCK_IN);
|
||||
if (ret < 0) {
|
||||
dev_err(dev,
|
||||
"failed to switch away from FLL: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
|
||||
0, 0, 0);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to stop FLL: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int imx_wm8962_late_probe(struct snd_soc_card *card)
|
||||
{
|
||||
struct snd_soc_pcm_runtime *rtd;
|
||||
struct snd_soc_dai *codec_dai;
|
||||
struct imx_priv *priv = snd_soc_card_get_drvdata(card);
|
||||
struct imx_wm8962_data *data = snd_soc_card_get_drvdata(card);
|
||||
struct device *dev = &priv->pdev->dev;
|
||||
int ret;
|
||||
|
||||
rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
|
||||
codec_dai = rtd->codec_dai;
|
||||
ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
|
||||
data->clk_frequency, SND_SOC_CLOCK_IN);
|
||||
if (ret < 0)
|
||||
dev_err(dev, "failed to set sysclk in %s\n", __func__);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int imx_wm8962_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct device_node *ssi_np, *codec_np;
|
||||
struct platform_device *ssi_pdev;
|
||||
struct i2c_client *codec_dev;
|
||||
struct imx_wm8962_data *data;
|
||||
struct imx_priv *priv;
|
||||
struct clk *codec_clk;
|
||||
int int_port, ext_port;
|
||||
int ret;
|
||||
|
||||
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->pdev = pdev;
|
||||
priv->sample_rate = 44100;
|
||||
priv->sample_format = SNDRV_PCM_FORMAT_S16_LE;
|
||||
|
||||
ret = of_property_read_u32(np, "mux-int-port", &int_port);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "mux-int-port missing or invalid\n");
|
||||
return ret;
|
||||
}
|
||||
ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "mux-ext-port missing or invalid\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* The port numbering in the hardware manual starts at 1, while
|
||||
* the audmux API expects it starts at 0.
|
||||
*/
|
||||
int_port--;
|
||||
ext_port--;
|
||||
ret = imx_audmux_v2_configure_port(int_port,
|
||||
IMX_AUDMUX_V2_PTCR_SYN |
|
||||
IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
|
||||
IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
|
||||
IMX_AUDMUX_V2_PTCR_TFSDIR |
|
||||
IMX_AUDMUX_V2_PTCR_TCLKDIR,
|
||||
IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "audmux internal port setup failed\n");
|
||||
return ret;
|
||||
}
|
||||
ret = imx_audmux_v2_configure_port(ext_port,
|
||||
IMX_AUDMUX_V2_PTCR_SYN,
|
||||
IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "audmux external port setup failed\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0);
|
||||
codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
|
||||
if (!ssi_np || !codec_np) {
|
||||
dev_err(&pdev->dev, "phandle missing or invalid\n");
|
||||
ret = -EINVAL;
|
||||
goto fail;
|
||||
}
|
||||
|
||||
ssi_pdev = of_find_device_by_node(ssi_np);
|
||||
if (!ssi_pdev) {
|
||||
dev_err(&pdev->dev, "failed to find SSI platform device\n");
|
||||
ret = -EINVAL;
|
||||
goto fail;
|
||||
}
|
||||
codec_dev = of_find_i2c_device_by_node(codec_np);
|
||||
if (!codec_dev || !codec_dev->dev.driver) {
|
||||
dev_err(&pdev->dev, "failed to find codec platform device\n");
|
||||
ret = -EINVAL;
|
||||
goto fail;
|
||||
}
|
||||
|
||||
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
||||
if (!data) {
|
||||
ret = -ENOMEM;
|
||||
goto fail;
|
||||
}
|
||||
|
||||
codec_clk = clk_get(&codec_dev->dev, NULL);
|
||||
if (IS_ERR(codec_clk)) {
|
||||
ret = PTR_ERR(codec_clk);
|
||||
dev_err(&codec_dev->dev, "failed to get codec clk: %d\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
data->clk_frequency = clk_get_rate(codec_clk);
|
||||
clk_put(codec_clk);
|
||||
|
||||
data->dai.name = "HiFi";
|
||||
data->dai.stream_name = "HiFi";
|
||||
data->dai.codec_dai_name = "wm8962";
|
||||
data->dai.codec_of_node = codec_np;
|
||||
data->dai.cpu_dai_name = dev_name(&ssi_pdev->dev);
|
||||
data->dai.platform_of_node = ssi_np;
|
||||
data->dai.ops = &imx_hifi_ops;
|
||||
data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
|
||||
SND_SOC_DAIFMT_CBM_CFM;
|
||||
|
||||
data->card.dev = &pdev->dev;
|
||||
ret = snd_soc_of_parse_card_name(&data->card, "model");
|
||||
if (ret)
|
||||
goto fail;
|
||||
ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
|
||||
if (ret)
|
||||
goto fail;
|
||||
data->card.num_links = 1;
|
||||
data->card.owner = THIS_MODULE;
|
||||
data->card.dai_link = &data->dai;
|
||||
data->card.dapm_widgets = imx_wm8962_dapm_widgets;
|
||||
data->card.num_dapm_widgets = ARRAY_SIZE(imx_wm8962_dapm_widgets);
|
||||
|
||||
data->card.late_probe = imx_wm8962_late_probe;
|
||||
data->card.set_bias_level = imx_wm8962_set_bias_level;
|
||||
|
||||
platform_set_drvdata(pdev, &data->card);
|
||||
snd_soc_card_set_drvdata(&data->card, data);
|
||||
|
||||
ret = devm_snd_soc_register_card(&pdev->dev, &data->card);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
fail:
|
||||
of_node_put(ssi_np);
|
||||
of_node_put(codec_np);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct of_device_id imx_wm8962_dt_ids[] = {
|
||||
{ .compatible = "fsl,imx-audio-wm8962", },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, imx_wm8962_dt_ids);
|
||||
|
||||
static struct platform_driver imx_wm8962_driver = {
|
||||
.driver = {
|
||||
.name = "imx-wm8962",
|
||||
.pm = &snd_soc_pm_ops,
|
||||
.of_match_table = imx_wm8962_dt_ids,
|
||||
},
|
||||
.probe = imx_wm8962_probe,
|
||||
};
|
||||
module_platform_driver(imx_wm8962_driver);
|
||||
|
||||
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
|
||||
MODULE_DESCRIPTION("Freescale i.MX WM8962 ASoC machine driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("platform:imx-wm8962");
|
||||
Loading…
Reference in New Issue