[MIPS] Pb1000 code style cleanup

Fix several errors and warnings given by checkpatch.pl:

- use of C99 // comments;

- brace not on the same line with condition in the 'switch' statement;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- using simple_strtol() where strict_strtol() could be used.

In addition to these changes, also do the following:

- properly indent the 'switch' statement;

- remove needless parentheses;

- insert spaces between operator and its operands;

- replace numeric literals/expressions with the matching macros;

- remove useless #if dirctive from board_setup();

- remove unneeded numeric literal type casts;

- remove space after the type cast's closing parenthesis;

- replace spaces after the macro name with tabs in the #define directives, and
  sometimes insert spaces there;

- remove excess new lines;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first/last line;

- combine some comments;

- update MontaVista copyright;

- remove Pete Popov's old email address...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Sergei Shtylyov 2008-04-30 23:25:55 +04:00 committed by Ralf Baechle
parent abd14cc00d
commit 7916c3548e
4 changed files with 118 additions and 201 deletions

View file

@ -1,8 +1,8 @@
#
# Copyright 2000 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
# Copyright 2000, 2008 MontaVista Software Inc.
# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1000 board.
#
# Makefile for the Alchemy Semiconductor PB1000 board.
lib-y := init.o board_setup.o irqmap.o

View file

@ -1,7 +1,6 @@
/*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -40,106 +39,108 @@ void __init board_setup(void)
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
// set AUX clock to 12MHz * 8 = 96 MHz
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* zero and disable FREQ2 */
/* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */
/* Zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0;
sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
sys_clksrc &= ~0x00007FE0;
sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
switch (prid & 0x000000FF)
{
switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
/* CPU core freq to 48MHz to slow it way down... */
au_writel(4, SYS_CPUPLL);
/* CPU core freq to 48 MHz to slow it way down... */
au_writel(4, SYS_CPUPLL);
/*
* Setup 48MHz FREQ2 from CPUPLL for USB Host
*/
/* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
* Setup 48 MHz FREQ2 from CPUPLL for USB Host
* FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
*/
sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* CPU core freq to 384MHz */
au_writel(0x20, SYS_CPUPLL);
/* CPU core freq to 384 MHz */
au_writel(0x20, SYS_CPUPLL);
printk("Au1000: 48MHz OHCI workaround enabled\n");
printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
break;
default: /* HC and newer */
// FREQ2 = aux/2 = 48 MHz
sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
au_writel(sys_freqctrl, SYS_FREQCTRL0);
default: /* HC and newer */
/* FREQ2 = aux / 2 = 48 MHz */
sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
break;
}
/*
* Route 48MHz FREQ2 into USB Host and/or Device
* Route 48 MHz FREQ2 into USB Host and/or Device
*/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
// configure pins GPIO[14:9] as GPIO
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
/* Configure pins GPIO[14:9] as GPIO */
pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
// 2nd USB port is USB host
pin_func |= 0x8000;
/* 2nd USB port is USB host */
pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
// make gpio 15 an input (for interrupt line)
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
// we don't need I2S, so make it available for GPIO[31:29]
pin_func |= (1<<5);
/* Make GPIO 15 an input (for interrupt line) */
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
/* We don't need I2S, so make it available for GPIO[31:29] */
pin_func |= SYS_PF_I2S;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x8000, SYS_TRIOUTCLR);
static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00);
static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
au_writel(static_cfg0, MEM_STCFG0);
// configure RCE2* for LCD
/* configure RCE2* for LCD */
au_writel(0x00000004, MEM_STCFG2);
// MEM_STTIME2
/* MEM_STTIME2 */
au_writel(0x09000000, MEM_STTIME2);
// Set 32-bit base address decoding for RCE2*
/* Set 32-bit base address decoding for RCE2* */
au_writel(0x10003ff0, MEM_STADDR2);
// PCI CPLD setup
// expand CE0 to cover PCI
/*
* PCI CPLD setup
* Expand CE0 to cover PCI
*/
au_writel(0x11803e40, MEM_STADDR1);
// burst visibility on
/* Burst visibility on */
au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
au_writel(0x83, MEM_STCFG1); // ewait enabled, flash timing
au_writel(0x33030a10, MEM_STTIME1); // slower timing for FPGA
au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */
au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */
/* setup the static bus controller */
/* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
@ -151,17 +152,20 @@ void __init board_setup(void)
au_sync_delay(1);
#endif
/* Enable Au1000 BCLK switching - note: sed1356 must not use
* its BCLK (Au1000 LCLK) for any timings */
switch (prid & 0x000000FF)
{
/*
* Enable Au1000 BCLK switching - note: sed1356 must not use
* its BCLK (Au1000 LCLK) for any timings
*/
switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
break;
default: /* HC and newer */
/* Enable sys bus clock divider when IDLE state or no bus
activity. */
/*
* Enable sys bus clock divider when IDLE state or no bus
* activity.
*/
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
break;
}

View file

@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
* Pb1000 board setup
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -44,16 +43,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = (int) fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
prom_argc = (int)fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
if (!memsize_str)
memsize = 0x04000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
else
memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}

View file

@ -1,9 +1,8 @@
/*
* Alchemy Semi PB1000 Referrence Board
* Alchemy Semi Pb1000 Referrence Board
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@ -28,145 +27,61 @@
#define __ASM_PB1000_H
/* PCMCIA PB1000 specific defines */
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
#define PB1000_PCR 0xBE000000
# define PCR_SLOT_0_VPP0 (1<<0)
# define PCR_SLOT_0_VPP1 (1<<1)
# define PCR_SLOT_0_VCC0 (1<<2)
# define PCR_SLOT_0_VCC1 (1<<3)
# define PCR_SLOT_0_RST (1<<4)
#define PB1000_PCR 0xBE000000
# define PCR_SLOT_0_VPP0 (1 << 0)
# define PCR_SLOT_0_VPP1 (1 << 1)
# define PCR_SLOT_0_VCC0 (1 << 2)
# define PCR_SLOT_0_VCC1 (1 << 3)
# define PCR_SLOT_0_RST (1 << 4)
# define PCR_SLOT_1_VPP0 (1 << 8)
# define PCR_SLOT_1_VPP1 (1 << 9)
# define PCR_SLOT_1_VCC0 (1 << 10)
# define PCR_SLOT_1_VCC1 (1 << 11)
# define PCR_SLOT_1_RST (1 << 12)
# define PCR_SLOT_1_VPP0 (1<<8)
# define PCR_SLOT_1_VPP1 (1<<9)
# define PCR_SLOT_1_VCC0 (1<<10)
# define PCR_SLOT_1_VCC1 (1<<11)
# define PCR_SLOT_1_RST (1<<12)
#define PB1000_MDR 0xBE000004
# define MDR_PI (1 << 5) /* PCMCIA int latch */
# define MDR_EPI (1 << 14) /* enable PCMCIA int */
# define MDR_CPI (1 << 15) /* clear PCMCIA int */
#define PB1000_MDR 0xBE000004
# define MDR_PI (1<<5) /* pcmcia int latch */
# define MDR_EPI (1<<14) /* enable pcmcia int */
# define MDR_CPI (1<<15) /* clear pcmcia int */
#define PB1000_ACR1 0xBE000008
# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */
# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */
# define ACR1_SLOT_0_READY (1 << 2) /* ready */
# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */
# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */
# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */
# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */
# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */
# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */
# define ACR1_SLOT_1_READY (1 << 10) /* ready */
# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */
# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */
# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */
# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */
#define PB1000_ACR1 0xBE000008
# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */
# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */
# define ACR1_SLOT_0_READY (1<<2) /* ready */
# define ACR1_SLOT_0_STATUS (1<<3) /* status change */
# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */
# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */
# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */
# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */
# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */
# define ACR1_SLOT_1_READY (1<<10) /* ready */
# define ACR1_SLOT_1_STATUS (1<<11) /* status change */
# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */
# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */
# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
#define CPLD_AUX0 0xBE00000C
#define CPLD_AUX1 0xBE000010
#define CPLD_AUX2 0xBE000014
#define CPLD_AUX0 0xBE00000C
#define CPLD_AUX1 0xBE000010
#define CPLD_AUX2 0xBE000014
/* Voltage levels */
/* VPPEN1 - VPPEN0 */
#define VPP_GND ((0<<1) | (0<<0))
#define VPP_5V ((1<<1) | (0<<0))
#define VPP_3V ((0<<1) | (1<<0))
#define VPP_12V ((0<<1) | (1<<0))
#define VPP_HIZ ((1<<1) | (1<<0))
#define VPP_GND ((0 << 1) | (0 << 0))
#define VPP_5V ((1 << 1) | (0 << 0))
#define VPP_3V ((0 << 1) | (1 << 0))
#define VPP_12V ((0 << 1) | (1 << 0))
#define VPP_HIZ ((1 << 1) | (1 << 0))
/* VCCEN1 - VCCEN0 */
#define VCC_3V ((0<<1) | (1<<0))
#define VCC_5V ((1<<1) | (0<<0))
#define VCC_HIZ ((0<<1) | (0<<0))
#define VCC_3V ((0 << 1) | (1 << 0))
#define VCC_5V ((1 << 1) | (0 << 0))
#define VCC_HIZ ((0 << 1) | (0 << 0))
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT)\
((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
/* PCI PB1000 specific defines */
/* The reason these defines are here instead of au1000.h is because
* the Au1000 does not have a PCI bus controller so the PCI implementation
* on the some of the older Pb1000 boards was very board specific.
*/
#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */
#define SDRAM_DEVID 0xBA010000
#define SDRAM_CMD 0xBA010004
#define SDRAM_CLASS 0xBA010008
#define SDRAM_MISC 0xBA01000C
#define SDRAM_MBAR 0xBA010010
#define PCI_IO_DATA_PORT 0xBA800000
#define PCI_IO_ADDR 0xBE00001C
#define PCI_INT_ACK 0xBBC00000
#define PCI_IO_READ 0xBBC00020
#define PCI_IO_WRITE 0xBBC00030
#define PCI_BRIDGE_CONFIG 0xBE000018
#define PCI_IO_START 0x10000000
#define PCI_IO_END 0x1000ffff
#define PCI_MEM_START 0x18000000
#define PCI_MEM_END 0x18ffffff
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 1
static inline u8 au_pci_io_readb(u32 addr)
{
writel(addr, PCI_IO_ADDR);
writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
return (readl(PCI_IO_DATA_PORT) & 0xff);
}
static inline u16 au_pci_io_readw(u32 addr)
{
writel(addr, PCI_IO_ADDR);
writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
return (readl(PCI_IO_DATA_PORT) & 0xffff);
}
static inline u32 au_pci_io_readl(u32 addr)
{
writel(addr, PCI_IO_ADDR);
writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
return readl(PCI_IO_DATA_PORT);
}
static inline void au_pci_io_writeb(u8 val, u32 addr)
{
writel(addr, PCI_IO_ADDR);
writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
writel(val, PCI_IO_DATA_PORT);
}
static inline void au_pci_io_writew(u16 val, u32 addr)
{
writel(addr, PCI_IO_ADDR);
writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
writel(val, PCI_IO_DATA_PORT);
}
static inline void au_pci_io_writel(u32 val, u32 addr)
{
writel(addr, PCI_IO_ADDR);
writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
writel(val, PCI_IO_DATA_PORT);
}
static inline void set_sdram_extbyte(void)
{
writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
}
static inline void set_slot_extbyte(void)
{
writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
}
#define SET_VCC_VPP(VCC, VPP, SLOT) \
((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#endif /* __ASM_PB1000_H */