1
0
Fork 0

microblaze: Fix intc_enable_or_unmask function

Intc_enable_or_unmask() is called at the last stage of handle_level_irq().

This function enables the irq first (Write INTC.SIE) and clear ISR next (Write INTC.IAR).
This would create problems that processor will get into a new interrupt as soon as SIE
is written because the previous level interrupt has been captured by INTC.

If the description bring some puzzles, here is the details of how interrupt is handled
for MicroBlaze after Interrupt signal is detected:
1. disable INTC (INTC.CIE = 1)
2. Acknowledge INTC (INTC.IAR = 1)
3. gets into interrupt source's handler, for example, timer's handler
4. Timer is interrupt handler acknowledge Timer Interrupt Status (Timer.TCSR0[23] = 1), and return
5. Enable INTC (INTC.SIE = 1)
6. Acknowledge INTC (INTC.IAR = 1)

INTC continue to capture source inputs even if INTC is disabled (INTC.IER == 1).
So between the gap of step 2 and step 3, the level interrupt from source makes INTC captures
a new interrupt and thus the INTC.ISR = 1 during step 3, 4, and 5.
When INTC is enabled in step 5, INTC's interrupt output will go high immediately.

In summary, the driver should issue step 6 before step 5.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
hifive-unleashed-5.1
Michal Simek 2012-11-05 11:51:13 +01:00
parent b881e99eea
commit 7958a68919
1 changed files with 2 additions and 1 deletions

View File

@ -44,7 +44,6 @@ static void intc_enable_or_unmask(struct irq_data *d)
unsigned long mask = 1 << d->hwirq;
pr_debug("enable_or_unmask: %ld\n", d->hwirq);
out_be32(INTC_BASE + SIE, mask);
/* ack level irqs because they can't be acked during
* ack function since the handle_level_irq function
@ -52,6 +51,8 @@ static void intc_enable_or_unmask(struct irq_data *d)
*/
if (irqd_is_level_type(d))
out_be32(INTC_BASE + IAR, mask);
out_be32(INTC_BASE + SIE, mask);
}
static void intc_disable_or_mask(struct irq_data *d)