From 7ac346823bbb284e9e66a3d4044c108b99c7149c Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 6 Sep 2018 14:04:52 -0700 Subject: [PATCH] dt-bindings: iio: vadc: Fix documentation of 'reg' The documentation of Qualcomm's SPMI PMIC voltage ADC claims that the 'reg' property consists of two values, the SPMI address and the length of the controller's registers. However the SPMI bus to which it is added specifies "#size-cells = <0>;". Remove the controller register length from the documentation of the field and the example. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt index 8498f11d06cd..b3c86f4ac7cd 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt @@ -17,7 +17,7 @@ VADC node: - reg: Usage: required Value type: - Definition: VADC base address and length in the SPMI PMIC register map. + Definition: VADC base address in the SPMI PMIC register map. - #address-cells: Usage: required @@ -143,7 +143,7 @@ Example: /* VADC node */ pmic_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>;